Philips 74hc hct241 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

For a complete data sheet, please also download:

•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

74HC/HCT241

Octal buffer/line driver; 3-state

Product specification
File under Integrated Circuits, IC06

September 1993

Philips Semiconductors Product specification

Octal buffer/line driver; 3-state 74HC/HCT241

FEATURES

• Output capability: bus driver

• ICC category: MSI

GENERAL DESCRIPTION

The 74HC/HCT241 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.

The 74HC/HCT241 are octal non-inverting buffer/line
drivers with 3-state outputs. The 3-state outputs are
controlled by the output enable inputs 1OE and 2OE.

QUICK REFERENCE DATA

GND = 0 V; T

=25°C; tr=tf= 6 ns

amb

SYMBOL PARAMETER CONDITIONS

t

PHL

/ t

propagation delay

PLH

CL= 15 pF; VCC= 5 V 7 11 ns

1An to 1Yn;

2An to 2Y

C

I

C

PD

input capacitance 3.5 3.5 pF
power dissipation capacitance per buffer notes 1 and 2 30 30 pF

n

Notes

1. C

is used to determine the dynamic power dissipation (PD in µW):

PD

PD=CPD× V

2

× fi+∑(CL× V

CC

2

× fo) where:

CC

fi= input frequency in MHz
fo= output frequency in MHz
∑ (CL× V

2

× fo) = sum of outputs

CC

CL= output load capacitance in pF
VCC= supply voltage in V

2. For HC the condition is VI= GND to V

CC

For HCT the condition is VI= GND to VCC− 1.5 V

TYPICAL

UNIT

HC HCT

ORDERING INFORMATION

See

“74HC/HCT/HCU/HCMOS Logic Package Information”

September 1993 2

.

Philips Semiconductors Product specification

Octal buffer/line driver; 3-state 74HC/HCT241

PIN DESCRIPTION

PIN NO. SYMBOL NAME AND FUNCTION

11
2, 4, 6, 8 1A
3, 5, 7, 9 2Y
10 GND ground (0 V)
17, 15, 13, 11 2A
18, 16, 14, 12 1Y
19 20E output enable input (active HIGH)
20 V

OE output enable input (active LOW)

0
0

0
0

CC

to 1A
to 2Y

to 2A
to 1Y

3
3

3
3

data inputs
bus outputs

data inputs
bus outputs

positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol

September 1993 3