Philips 74hc hct126 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

For a complete data sheet, please also download:

•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

74HC/HCT126

Quad buffer/line driver; 3-state

Product specification
File under Integrated Circuits, IC06

December 1990

Philips Semiconductors Product specification

Quad buffer/line driver; 3-state 74HC/HCT126

FEATURES

• Output capability: bus driver

• ICC category: MSI

GENERAL DESCRIPTION

The 74HC/HCT126 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL).
They are specified in compliance with JEDEC standard no. 7A.

The HC/HCT126 are four non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by
the output enable input (nOE). A LOW at nOE causes the outputs to assume a HIGH impedance OFF-state.

The “126” is identical to the “125” but has active HIGH enable inputs.

QUICK REFERENCE DATA

GND = 0 V; T

= 25 °C; tr= tf= 6 ns

amb

SYMBOL PARAMETER CONDITIONS

t

PHL

C
C

I
PD

/ t

PLH

propagation delay nA to nY CL= 15 pF; VCC= 5 V 9 11 ns
input capacitance 3.5 3.5 pF
power dissipation capacitance per buffer notes 1 and 2 23 24 pF

Notes

1. C

is used to determine the dynamic power dissipation (PDin µW):

PD

PD= CPD× V

2

× fi+ ∑ (CL× V

CC

2

× fo) where:

CC

fi= input frequency in MHz
fo= output frequency in MHz
CL= output load capacitance in pF
VCC= supply voltage in V
∑ (CL× V

2. For HC the condition is VI= GND to V

2

× fo) = sum of outputs

CC

CC

For HCT the condition is VI= GND to VCC− 1.5 V

ORDERING INFORMATION

“74HC/HCT/HCU/HCMOS Logic Package Information”

See

.

TYPICAL

UNIT

HC HCT

December 1990 2