Philips 74HCT251U, 74HCT251PW, 74HCT251N, 74HCT251DB, 74HCT251D Datasheet

DATA SH EET

Product specification
File under Integrated Circuits, IC06

December 1990

INTEGRATED CIRCUITS

74HC/HCT251

8-input multiplexer; 3-state

For a complete data sheet, please also download:

•The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Information

•The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

December 1990 2

Philips Semiconductors Product specification

8-input multiplexer; 3-state 74HC/HCT251

FEATURES

• True and complement outputs

• Both outputs are 3-state for further multiplexer

expansion

• Multifunction capability

• Permits multiplexing from n-lines to one line

• Output capability: standard

• ICC category: MSI

GENERAL DESCRIPTION

The 74HC/HCT251 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.

The 74HC/HCT251 are the logic implementations of
single-pole 8-position switches with the state of three
select inputs (S

0,S1,S2

) controlling the switch positions.
Assertion (Y) and negation (Y) outputs are both provided.
The output enable input (OE) is active LOW. The logic
function provided at the output, when activated, is:

Y=OE.(I0.S0.S1.S2 + I1.S0.S1.S2+

+ I2.S0.S1.S2+ I3.S0.S1.S2+
+ I4.S0.S1.S2+ I5.S0.S1.S2+
+ I6.S0.S1.S2+ I7.S0.S1.S2)

Both outputs are in the high impedance OFF-state (Z)
when the output enable input is HIGH, allowing multiplexer
expansion by tying the outputs.

QUICK REFERENCE DATA

GND = 0 V; T

amb

= 25 °C; tr= tf= 6 ns

Notes

1. C

PD

is used to determine the dynamic power dissipation (PDin µW):

PD= CPD× V

CC

2

× fi+∑(CL× V

CC

2

× fo) where:
fi= input frequency in MHz
fo= output frequency in MHz
∑ (CL× V

CC

2

× fo) = sum of outputs
CL= output load capacitance in pF
VCC= supply voltage in V

2. For HC the condition is VI= GND to V

CC

For HCT the condition is VI= GND to VCC− 1.5 V

ORDERING INFORMATION

See

“74HC/HCT/HCU/HCMOS Logic Package Information”

.

SYMBOL PARAMETER CONDITIONS

TYPICAL

UNIT

HC HCT

t

PHL

/ t

PLH

propagation delay CL= 15 pF; VCC= 5 V

I

n

to Y 15 19 ns

I

n

to Y1719ns

S

n

to Y 20 20 ns

S

n

to Y2121ns

C

I

input capacitance 3.5 3.5 pF

C

PD

power dissipation capacitance per package notes 1 and 2 44 46 pF

December 1990 3

Philips Semiconductors Product specification

8-input multiplexer; 3-state 74HC/HCT251

PIN DESCRIPTION

PIN NO. SYMBOL NAME AND FUNCTION

4, 3, 2, 1, 15, 14, 13, 12 I

0

to I

7

multiplexer inputs
5 Y multiplexer output
6

Y complementary multiplexer output

7

OE 3-state output enable input (active LOW)
8 GND ground (0 V)
11, 10, 9 S

0,S1,S2

select inputs

16 V

CC

positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.