Philips 60PW9383, 55PW9383 User Manual

3135 035 21401

55PW9383
60PW9383

Product Highlights

• High-definition display—1080i/480p

• Philips HD Optics

• Auto IntelliSense

™

Focus

• HD DVI and Component Inputs

• Active Control

™

•Eye Fidelity—selectable progressive or
interlaced scan

•APAC

™

(Automatic Phosphor Aging

Compensation)

Features

• Multipoint digital convergence

•Protective screen filter

• Virtual Dolby

®

Surround—30-watt RMS

• 3-D Y/C comb filter

• Double-window, two-tuner
picture-in-picture

• Slim, upscale styling

• Home-cinema universal remote
with backlighting

Rear-projection

Rear-projection

HDTV Monitor

HDTV Monitor

2

Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a
PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-

chase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to ensure you

receive all the benefits you’re entitled to.

Congratulations

on your

purchase,

and welcome to the

“family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed prod­ucts available today. And we’ll do everything in our power to keep you happy with your purchase
for many years to come.

As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive
warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome–and thanks for investing in a PHILIPS product.

Sincerely,

Lawrence J. Blanford
President and Chief Executive Officer

Know these

safetysymbols

t This “bolt of lightning” indicates uninsulated material within your unit may cause an electri-

cal shock. For the safety of everyone in your household, please do not remove product covering.

s The “exclamation point” calls attention to features for which you should read the enclosed

literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warranty

Verification

Registering your product within
10 days confirms your right to
maximum protection under the
terms and conditions of your
PHILIPS warranty.

Owner

Confirmation

Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.

Model

Registration

Returning your Warranty
Registration Card right away guar­antees you’ll receive all the infor­mation and special offers which
you qualify for as the owner of your
model.

P.S. Remember, to get the most from your PHILIPS

product, you must return your
Warranty Registration Card within 10 days. So
please mail it to us right now!

R

E

G

I

S

T

R

A

T

I

O

N

N

E

E

D

E

D

W

I

T

H

I

N

1

0

D

A

Y

S

Hurry!

Visit our World Wide Web Site at http://www.philips.com

3

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9. Do not defeat the safety purpose of the polarized or ground­ing-type plug. Apolarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong. The wide blade or third prong
are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.

10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories specified by the manu­facturer.

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the ap-

p- paratus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from
tip-over.

13. Unplug this apparatus during lightning storms or when
unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

15. This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental con­siderations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries

Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged;

or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure

damaged.

17. Tilt/Stability - All televisions must comply with recommend­ed international global safety standards for tilt and stability
properties of its cabinet design.

• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.

19. Power Lines - An outdoor antenna should be located away
from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPANo.
70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.

21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclo­sure through openings.

Example of Antenna Grounding
as per NEC - National Electric Code

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.

Rev. 8/13/01

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

(NEC SECTION 810-20)

Refer to the simple Quick Use and Setup Guide (supplied with your
TV) for details on the following:

• Basic TV connections

•Television and remote-control operation

• On-screen menu controls

• Installation features.

Selecting the Stereo/Mono Sound Mode . . . . . . . . . . . . . .38

Selecting the SAP (Second Audio Program) Feature . . . . .39

Using the Bass Boost Control . . . . . . . . . . . . . . . . . . . . . .40

FEATURES

The Timer

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Displaying the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Setting the Timer’s Start Time and Stop Time . . . . . . . . .43

Selecting the Timer’s Channel . . . . . . . . . . . . . . . . . . . . .44

Setting the Timer’s Activate Control . . . . . . . . . . . . . . . .45

AutoLock™

Understanding AutoLock™ . . . . . . . . . . . . . . . . . . . . . . .46

Setting up the AutoLock™ Access Code . . . . . . . . . . . . .47

Using AutoLock™ to Block Channels . . . . . . . . . . . . . . .48

Using AutoLock™ to Block by Movie Rating . . . . . . . . .49

Using AutoLock™ to Block by TV Rating . . . . . . . . . . .50

Turning the AutoLock™ Blocking Control

on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Using AutoLock™ to Block Unrated Broadcasts . . . . . . .52

Using AutoLock™ to Block Broadcasts That

Have No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Reviewing Your Current AutoLock™ Settings . . . . . . . . .54

Using the Closed Captioning Control . . . . . . . . . . . . . . . . .55

Using the Picture-format Control . . . . . . . . . . . . . . . . .56–57

Using Active Control™ . . . . . . . . . . . . . . . . . . . . . . . . . . .58

APPENDIXES

Appendix A: Compatibility Information

for the TV’s High-definition Inputs . . . . . . . . . .59

Appendix B: Model Specifications . . . . . . . . . . . . . . . . . . .60

Appendix C: Setting Color Space for HD INPUT-AV 4 . . . .61

GENERAL INFORMATION

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63–64

Glossary of Television Terms . . . . . . . . . . . . . . . . . . . . . . .65

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Factory Service Locations . . . . . . . . . . . . . . . . . . . . . .67–68

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

CONTENTS

Items Included with This TV

As you unpack your TV, please note that this Directions for Use manual
contains safety-tip information, the locations of factory-service centers, a
warranty registration card, remote control, and batteries for the remote
control. Please take a few minutes to complete your registration card. The
serial number for the TV is on the rear of the set. Refer to page 62 for
cleaning and care instructions.

INTRODUCTION

Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . .2

Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

CONNECTING ACCESSORY DEVICES

TO

YOUR TV

Panel Overview: Standard Inputs and Outputs . . . . . . . . . . .6

Panel Overview: High-definition Inputs . . . . . . . . . . . . . . . .7

Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Connecting a VCR and Cable Box . . . . . . . . . . . . . . . . . . . .9

Connecting and Using an Audio Hi-fi System

with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Making Optional Surround-sound Connections . . . . . . . . .11

Connecting a Standard DVD Player . . . . . . . . . . . . . . . . . .12

Connecting an S-Video Device . . . . . . . . . . . . . . . . . . . . .13

Connecting a DVD Player with Progressive-scan

Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Connecting an HD Receiver to the

HD INPUT-AV 4 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .15

Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . .16

Connecting and Using Headphones

with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

USING THE REMOTE CONTROL

Programming the TV Remote to Work

with Accessory Devices . . . . . . . . . . . . . . . . . . . . .18

Using the Code-entry Method to Program Your

TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Using the Search Method to Program Your

TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Direct-entry Codes for A/V Accessory Devices . . . . . .21–22

Using the TV Remote with Accessory Devices . . . . . . . . .23

Using the AV and Source Select Buttons . . . . . . . . . . . . . .24

Using AutoSound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Using AutoPicture™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Using AutoSurf™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Using Program List and Alternate Channel (A/CH) . . . . . .28

Using the Sleep Timer Control . . . . . . . . . . . . . . . . . . . . . .29

USING THE ON-SCREEN SUBMENUS

PICTURE

Adjusting the Picture Controls . . . . . . . . . . . . . . .30

Setting the Eye Fidelity Control . . . . . . . . . . . . . . . . . . . . .31

Setting the Dynamic Contrast Control . . . . . . . . . . . . . . . .32

Adjusting the Manual Converge Controls:

Converge Red/Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Adjusting the Manual Converge Controls:

Multipoint Red/Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

SOUND

Adjusting the Treble, Bass, and

Balance Controls . . . . . . . . . . . . . . . . . . . . . . . .35

Using the AVL (Audio Volume Leveler) Control . . . . . . . .36

Selecting the Surround-sound Modes . . . . . . . . . . . . . . . . .37

QUICK USE AND SETUP GUIDE

4

POWER

ACC

TV

VCR

ACTIVE

FREEZE

SWAP PIP CH

CONTROL

DN

UP

PICTURE

SOUND

MENU/

STATUS/

SELECT

EXIT

ppendixes

BC

A

5

FEATURES

Yo ur new projection television and its packaging contain materials
that can be recycled and reused. Specialized companies can recy­cle your product to increase the amount of reusable materials and
minimize the amounts that need to be properly disposed. The bat­teries used by your product should not be thrown away when
depleted but should be handed in and disposed of as small chemi­cal waste. Please find out about the local regulations concerning
how to dispose of your old television, batteries, and packaging

End-of-life Disposal

Philips HD Optics gives extreme resolution HD with cutting-edge

processing and display technology. Includes a Philips wideband
video amplifier, microphosphor CRTs, hybrid projection lenses,
first-surface mirror, and fine-pitched lenticular screen.

Auto IntelliSense™ Focus automatically adjusts picture conver-

gence at the push of a button. After reviewing a special test pat­tern, optical sensors send position information to the controller,
which then corrects the pictures. Auto IntelliSense™ Focus
responds to the natural and man-made magnetic field conditions
where the TV is located, so you will always enjoy the best possible
picture.

Automatic Phosphor Aging Compensation (APAC) works with

the set’s Automatic Format feature to prevent screen burn left by
nonmoving images. Periodically, APAC automatically shifts your
television picture in very small increments, but in increments large
enough to blur image retention. APAC is like a screen saver for
your TV.

Active Control™ continuously measures and corrects all incoming

signals to provide the best picture settings. This feature provides a
sharp and virtually noise-free picture any time, from any NTSC
source. NTSC is the

National Television Standards Committee for­mat devised in the 1940s for TV broadcast analog video signals
(525 lines: 30 Hz).

Eye Fidelity gives you a choice between two different picture-

scanning techniques—progressive and interlaced. Progressive scan
doubles the number of visible picture lines per field by displaying
all picture frame lines at once, eliminating line flicker. The inter­laced mode provides for a double vertical display (interlaced) of
progressive scan, which reduces annoying motion artifacts. The
Interlaced mode also helps smooth out jagged lines sometimes
seen on curved and angled surfaces.

Protective screen filter helps prevent accidental damage to the

delicate front lenticular screen. This filter has been specifically for­mulated by Philips for HD displays to give the best possible pic­ture and still protect your investment.

HD DVI and Component Inputs—DVI supports High-definition

Copy Protected digital video input for connection to compliant set­top boxes. The HD component connection (Y Pb Pr or RGB +HV0
offers color purity, crisp color detail, and reduced color noise.

3-D Y/C Digital Comb Filter (activated when using the tuner and

composite inputs) processes the video with spatial and temporal
filtering, virtually eliminating cross-color and cross-luminance
interference, improving video resolution. This filter uses extensive
memory to analyze complete video fields, significantly reducing
“dot crawl,” “hanging dots,” and “barber pole artifacts” on the
image.

Double-window, two-tuner Picture-in-Picture (PIP) allows you

to watch two shows, side by side. No VCR is necessary for tuning
PIP pictures. Your set’s two separate tuners let you select two
shows and display both in windows of equal proportion.

Virtual Dolby* Surround (referred to as Dolby Virtual in the
on-screen submenu) uses two speakers to simulate the surround

effect produced by a multichannel system.

Incredible Surround™ enhances stereo programs by making the

sound broader and fuller.

Center channel input, which has standard clip-on style speaker

connectors, simplifies the connection of surround-sound equipment
for optimal home-theater enjoyment. Since it contains the dialog
information, the center channel is vitally important to the overall
performance of any large screen in a home-theater system.

Home-cinema universal remote control operates your TV set and

other devices that work by infrared remote control, such as VCRs,

cable converter boxes, satellite receivers, and others. Note:You may

need to program the remote to work with devices other than the TV.
See pages 18–23.

Hi-fi stereo system, including a built-in audio amplifier and a twin

speaker system with 2-inch tweeters and 5-inch woofers. The sys­tem enables you to hear stereo sound or Second Audio Program
(SAP) bilingual broadcasts when they are available.

Audio/video jacks allow direct connections with VCRs and other

accessories for quality TV picture and sound playback. Component
video input jacks are provided for high-fidelity color and picture
resolution when using digital video source material, such as a DVD.

Audio Volume Leveler (AVL) control keeps the TV’s sound at an

even level. Peaks and valleys that occur during program changes or
commercial breaks are reduced, making for a more consistent, com­fortable sound.

AutoChron™ automatically sets the right time of day and main-

tains it with digital precision through brownouts, power failures,
and even Daylight Savings Time adjustments.

AutoLock™ protects young children from objectionable program-

ming with V-chip technology.

AutoSound™ allows you to select from three factory-set controls

and a personal control that you set according to your own prefer­ences through the on-screen Sound submenu. The three factory-set
controls—Voice, Music, and Theatre—enable you to tailor the TV
sound to enhance the particular programming you are watching.

AutoSurf™ allows you to easily switch among only the channels

that are of interest to you. You can program up to 10 channels into
the TV’s AutoSurf™ memory through the on-screen display.

Channel Edit allows you to add or remove channels from the list of

channels stored in the TV’s memory. Channel Edit makes it easy to
limit or expand the number of channels that are available to you
when you press the CH +/– buttons on your remote control.

Closed Captioning allows you to read TV program dialog or voice

conversations as on-screen text.

Dynamic Contrast helps sharpen the picture quality by making the

contrast between the dark and bright picture areas more noticeable
as the image on screen changes.

As an Energy Star® Partner, Philips Consumer Electronics has
determined this product meets the Energy Star® guidelines for
energy efficiency. Energy Star® is a U.S. registered mark. Using
products with the Energy Star® label can save energy. Saving
energy reduces air pollution and lowers utility bills.

*Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.

Active Control, APAC, AutoPicture, AutoSound, AutoSurf, Incredible
Surround, and IntelliSense are trademarks of Philips Consumer Electronics.
Copyright 2003 Philips Consumer Electronics. All rights reserved.

6

Connecting Accessory Devices to Your TV

Y

ou can connect a wide range of video and

audio devices to your TV, in various ways.
This page and the next one provide an overview
of signal compatibilities and the types of
devices you can connect to the jacks.
Connection examples follow on subsequent
pages. See pages 1 and 2 of the Quick Use and
Setup Guide that came with your set for exam­ples of basic connections. You may also want to
refer to the user instructions that came with
each particular device for information on con­nections.

What You Can Connect to the

Standard Panel Jacks

1

ANTENNA IN 75Ω jack—use to con-

nect radio-frequency (RF) signals from
VHF/UHF antennas or a cable system.
These are 480i signals.

2

YPbPr (component video input [CVI]
jacks)—compatible with 480i signals

only. Use to connect accessories having
component video outputs, such as DVD
players, laser-disc players, video-game
players, satellite receivers, or other
devices. Use the INPUT-AV 1 L(eft) and
R(ight) AUDIO jacks for sound connec­tions. CVI is not accessible in the PIP
window.

3

S-VIDEO (super video) jacks—com-

patible with 480i signals only. Use to
connect accessories having Super VHS
(S-VHS) outputs, such as VCRs, DVD
players, laser-disc players, video-game
players, satellite receivers, or other
devices.

4

VIDEO (composite) jacks (INPUT-AV

1,
INPUT-AV 2, and TV’s side jack panel
[AV3])—compatible with 480i signals

only. Use to connect accessories having
composite video outputs, such as VCRs,
video-game players, or other devices.

5

AUDIO inputs (INPUT-AV 1,
INPUT-AV 2, and TV’s side jack panel
[AV3])—use to connect from the audio

output jacks on VCRs, DVDs, or other
accessories.

6

OUTPUT (VIDEO/AUDIO)—video is

compatible with 480i signals only. Use to
connect to a VCR to record programs
from the TV. Or use the AUDIO outputs
to connect to an audio hi-fi system.

7

AMP SWITCH, CENTER
CHANNEL AMP INPUT, and
SUBWOOFER Output—use to make

optional surround-sound connections
(see page 11).

8

n Headphone jack—use to connect

headphones for personal listening.

PANEL OVERVIEW

:STANDARD INPUTS AND OUTPUTS

The side jack-panel inputs (recognized by the
TV as AV3) are convenient for connecting a
camcorder. See page 16.

cc

C

HECK IT OUT

Summary of signal compatibilities

TV Input

Compatible output signal

from an external source

or device

ANTENNA IN 75Ω, INPUT AV-1,YPbPr
(component video inputs [CVI]),
INPUT AV-2, and side jack panel (AV3)

480i (480 lines, interlaced)

Signal sources connected to the
HD INPUT-AV 4 or HD INPUT-AV 5 jacks
will provide the best picture (see page 7 for
descriptions of those inputs). Among the
standard (480i-compatible) inputs—
ANTENNA IN 75Ω, INPUT AV-1, CVI
[labeled Y, Pb, Pr], INPUT AV-2, and the
side jack panel [AV3])—the best picture
will come from signal sources connected to
the CVI jacks. S-Video will provide the

HELPFUL HINTS

ANTENNA IN 75Ω

1

4

S-VIDEO

L

3

5

Side Jack Panel

4

G

8

NOTE: The
TV recognizes
the side jack
panel as AV3.

AMP SWITCH

EXT INT

+

CENTER CHANNEL AMP INPUT

6

INPUT-AV 1

VIDEO

AUDIO

Y

Pb

L

Pr

R

7

_

DVI

4

INPUT-AV 2 SUBWOOFEROUTPUT

VIDEO

S-VIDEO

L

L

AUDIO

R

2

3

5

3

5

Rear of TV

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

7

V

L

SYNC

AUDIO

H

R

AUDIO

L

R

7

Connecting Accessory Devices to Your TV

PANEL OVERVIEW

:HIGH-DEFINITION INPUTS

What You Can Connect to the

High-definition Input Jacks

1

HD INPUT-AV 4—use to connect dig-

ital equipment with a 1080i or a 480p
signal output, such as HD receivers
(1080i or 480p) or DVD players with
progressive-scan capability (480p). You
can connect equipment with YPbPr
component video or RGB outputs to
the HD INPUT-AV 4 jacks. H and V
sync connections may or may not be
required for RGB connections. (See
page 59.) Dedicated audio input jacks
are located with the HD INPUT-AV 4
video jacks.

NOTE: The Picture-in-Picture (PIP)

feature is not available for use with AV 4.

2

HD INPUT-AV 5—use to connect digi-

tal equipment with DVI (digital video
interface) 1080i or 480p output. DVI is
a specific digital input allowing encrypt­ed transmission of uncompressed HD
content. DVI includes HDCP (high­bandwidth digital content protection),
which is supported by Hollywood,
satellite providers, and most of the con­sumer electronics industry. DVI is gain­ing momentum and quickly becoming
an industry standard for the consumer to
view high-definition material while keep­ing content protected.

NOTE: The Picture-in-Picture (PIP)

feature is not available for use with AV5.

Summary of signal compatibilities

TV Input

Compatible output signal

from an external source

or device

HD INPUT-AV 4

1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)

• The TV’s default color-space setting for HD
INPUT-AV 4 is YPbPr. If the picture looks
grossly incorrect, try changing the color-space
setting on either the digital equipment or the
TV. For more information on setting the color
space on the digital equipment, see the equip­ment’s directions-for-use manual. To set the
TV’s color space, see page 61 in this manual.

• This television is designed to be compatible
with high-definition signal standards 1080i
and 480p as specified by the Electronic
Industries Association standard EIA770.3.
Because output standards may vary by manu­facturer, you may encounter some digital
equipment that will not properly display pic-

tures on the TV.

•The PIP (Picture-in-picture) feature

allows you
to tune to a program in the main window and
scan other channels in the PIP window. From a
single antenna or cable input, signals are separat­ed into two signals within the television. The
AV1, AV2, and AV3 inputs are also available as
PIP sources.

HELPFUL HINTS

HD INPUT-AV 5

Digital video interface (DVI) with
1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)

Because DVI is such new technology, the elec­tronics industry is still working toward a deci­sion on one standard. Philips testing has deter­mined that compatibility issues exist with
respect to a limited number of high-definition
receivers when they are connected to the DVI
input on this television. If you should experi­ence difficulties, please contact our Customer
Care Center at 1-800-531-0039.

HELPFUL HINT

ANTENNA IN 75Ω

VIDEO

S-VIDEO

L

AMP SWITCH

EXT INT

+

CENTER CHANNEL AMP INPUT

INPUT-AV 1

L

AUDIO

R

_

Y

Pb

Pr

Rear of TV

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

SYNC

R/Pr

B/Pb

V

L

AUDIO

H

R

INPUT-AV 2 SUBWOOFEROUTPUT

AUDIO

VIDEO

L

R

S-VIDEO

L

2
1

AUDIO

L

R

8

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

SLEEP

REC •

VCR

ACC

MENU/
SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

5

AV1

T

he TV’s audio/video (AV) input jacks provide

for direct picture and sound connections
between the TV and accessory devices such as
VCRs, DVD players, and others that have AV out­put jacks.

This example, which uses the INPUT-AV 1 jacks,
shows you one way to connect a VCR to your TV.

Refer to the directions-for-use manual for your
VCR for further information on connections.

To make the connections shown in this example,
you will need:

• one coaxial cable (75Ω)

• one cable for a video connection (standard

RCA connector)

•two cables for audio connections (standard

RCA connectors) (only one cable is needed for
a nonstereo VCR).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect a cable TV or antenna signal to

the ANT IN jack on the rear of the VCR.

2

Connect from the OUT jack on the rear

of the VCR to the

ANTENNA IN 75Ω

jack on the rear of the TV.

3

Connect the VIDEO OUT jack on the

rear of the VCR to the INPUT AV1
VIDEO jack on the rear of the TV.

4

Connect the audio output R(ight) and
L(eft) jacks on the rear of the VCR to the

INPUT-AV 1 AUDIO jacks on the rear of
the TV.

NOTE: If the VCR is a mono (nonstereo)

unit, connect only the left audio cable,
which usually has a white connector.

5

Press the AV button on the remote con­trol as many times as necessary to select

the AV1 source for the viewing of materi­als from your VCR.

Connecting Accessory Devices to Your TV

CONNECTING A VCR

You can display the AV1, AV2, or AV3 signal
sources in the PIP window. See page 8 of the

Quick Use and Setup Guide for information on

cc

C

HECK IT OUT

• Stereo sound will pass from the ANT
OUT jack on the VCR to the ANTENNA
IN 75Ω jack on the TV only when the
VCR is in TV mode. This is the mode
that allows the TV to use its channel
selector.

•To simplify making connections, audio
and video cables often have color-coded
plugs. The jacks on your TV are likewise
color coded to match the plugs. The cod­ing is as follows:
—Yellow for video (composite)
—Red for the right audio channel
—White for the left audio channel

NOTE: If your VCR is mono (non-

stereo), you will connect only one audio
cable. You must ensure that the TV is set
to MONO for the signal source to which
you’ve connected the VCR (

INPUT-AV

1,
INPUT-AV2, or the side panel inputs
[AV3]). Otherwise, you will receive
sound from only one of the TV’s speakers.
See page 38.

HELPFUL

HINTS

ANTENNA IN 75Ω

2

CENTER CHANNEL AMP INPUT

3

VIDEO

S-VIDEO

L

L

AUDIO

R

Rear of VCR*

* (Example: Philips VCR
model VR674CAT)

AMP SWITCH

EXT INT

+

Y

Pb

Pr

4

Rear of TV

_

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

L

L

SYNC

AUDIO

H

R

AUDIO

R

Cable TV Company

or VHF/UHF Antenna

Coaxial Cable

Lead-in from

AUDIO

INPUT-AV 2 SUBWOOFEROUTPUTINPUT-AV 1

VIDEO

S-VIDEO

L

L

R

1

AUDIO

L

ANT

IN

IN

OUT

R

VIDEO

OUT

CH3 CH4

IN

OUT

9

CONNECTING A VCR

AND CABLE BOX

P

resented here is a connection example

involving a VCR and cable box.

Refer to the VCR’s directions-for-use manual
for further information on connections.

To make the connections in this example, you
will need:

• one, two-way signal splitter

•two coaxial cables (75Ω)

• one cable for a video connection (standard
RCA connector)

•two cables for audio connections (standard
RCA connectors) (only one cable is needed
for connection to a nonstereo VCR).

NOTE: The cables are not supplied with your
TV. You should be able to buy them at most
stores that sell electronics. Or you can call
our Customer Care Center at
1-800-531-0039.

1

Connect a cable TV signal to a two-

way signal splitter.

2

Connect one of the two-way signal
splitter outputs to the INPUT on the

cable box.

3

Connect the other two-way signal
splitter output to the ANTENNA IN

75Ω on the rear of the TV.

4

Connect from the cable box OUTPUT
jack to the ANT IN jack on the rear of

the VCR.

5

Connect the VIDEO OUT jack on
the VCR to the INPUT-AV 1 VIDEO

jack on the rear of the TV.

6

Connect the AUDIO OUT R(ight)
and L(eft) jacks on the VCR to

INPUT-AV 1 AUDIO jacks on the rear
of the TV.

NOTE: If the VCR is a nonstereo unit,

connect only the left audio cable,
which usually has a white connector.

7

Press the AV button on the remote
control as many times as necessary

to select the AV1 source for the view­ing of materials from your VCR.

Connecting Accessory Devices to Your TV

• The RF output on a cable box, usually
labeled “OUTPUT,” “OUT,” or “TO TV,”
will not pass a stereo sound signal to the
ANTENNA IN 75Ω jack on the TV. If, how­ever, your cable box has separate
Audio/Video outputs, using A/V cables to
connect to those outputs and to the A/V
inputs on the TV might pass a stereo sound
signal to the TV. Contact your cable TV
company for more information.

•To simplify making connections, the plugs
on audio and video cables are often color
coded. The jacks on your TV are likewise
color coded to match the plugs.
The coding is as follows:
—Yellow for video (composite)
—Red for the right audio channel
—White for the left audio channel

NOTE: If your VCR is mono (nonstereo),

you will connect only one audio cable. You
must ensure that the TV is set to MONO for
the signal source to which you’ve connected
the VCR (INPUT-AV 2, INPUT-AV 1, or the
side panel inputs [AV3]). Otherwise, you will
receive sound from only one of the TV’s
speakers. See page 38.

HELPFUL HINTS

Rear of VCR*

* (Example: Philips
VCR model
VR674CAT)

AV1

TV

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

7

SURF

ITR/ HOME HOME PERSONAL

ANTENNA IN 75Ω

AMP SWITCH

3

EXT INT

+

CENTER CHANNEL AMP INPUT

5

INPUT-AV 1

Y

VIDEO

POWER

ACC

VCR

ACTIVE

CONTROL

DN

REC •

SAP

FREEZE

UP

PICTURE

MENU/
SELECT

MUTE

FORMAT

CH

213
546
879

SURF

0

PIP ON/OFF

SLEEP

PROG.LISTDOLBY VAV

S-VIDEO

L

AUDIO

Pb

L

Pr

R

Rear of TV

_

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

6

AUDIO

INPUT-AV 2 SUBWOOFEROUTPUT

VIDEO

S-VIDEO

L

L

R

R/Pr

B/Pb

V

L

AUDIO

L

AUDIO

R

R

SYNC

H

4

AUDIO

L

ANT

IN

IN

OUT

R

VIDEO

OUT

CH3 CH4

IN

OUT

Rear of Cable Box

Two-way

Signal

Splitter

Coaxial Cable Lead-in from

1

Cable TV Company

or VHF/UHF Antenna

INPUT

OUTPUT

2

10

CONNECTING AND U

SING AN AUDIO HI-FI SYSTEM WITH YOUR TV

Y

ou can use your TV’s AUDIO OUTPUT jacks

to connect to an external audio hi-fi system.

Follow the simple steps below.
To make these connections, you will need two

cables for audio connections (standard RCA).
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect from the L(eft) and R(ight)
AUDIO OUTPUT jacks on the rear of the

TV to the L(eft) and R(ight) AUX/TV
INPUT jacks on the rear of the hi-fi system.

2

See the section below on using the

AUDIO OUT control.

A

fter connecting the TV’s AUDIO OUTPUT

jacks to the AUDIO INPUT jacks on an
external hi-fi system, set the AUDIO OUT con­trol in the SOUND submenu to either VARI­ABLE or FIXED to determine whether you
adjust the volume at the TV or at the external
hi-fi system. To change the volume at the TV
using the TV’s remote control, you must select
VARIABLE. To adjust the volume at the stereo
using the hi-fi’s controls, you must select
FIXED. You can also use the SPEAKERS
control in the SOUND submenu to turn the
TV’s speakers off.

1

Press the MENU/SELECT button

on the remote control to show the on­screen menu.

2

Press the CURSOR RING DOWN

once to highlight SOUND.

3

Press the CURSOR RING RIGHT

to enter the SOUND submenu.

4

Press the CURSOR RING DOWN

repeatedly until AUDIO OUT is high­lighted.

5

Press the CURSOR RING LEFT or
RIGHT to set the AUDIO OUT to

either VARIABLE or FIXED.

6

If you want to turn the TV’s internal
speakers off, press the CURSOR
RING DOWN repeatedly until

SPEAKERS is highlighted. Then press
the CURSOR RING LEFT or RIGHT
to turn the speakers off.

7

Press the STATUS/EXIT button to

exit the menu.

Connecting Accessory Devices to Your TV

The sound outputs from the TV to an exter­nal hi-fi system are not affected or tailored
by the TREBLE, BASS, BALANCE, AVL,
INCR. SURROUND, and BASS BOOST
controls in the TV’s SOUND submenu.

HELPFUL HINT

S-VIDEO

L

VIDEO

AUDIO

AMP SWITCH

EXT INT

+

CENTER CHANNEL AMP INPUT

INPUT-AV 1

L

R

Rear of TV

_

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

INPUT-AV 2 SUBWOOFEROUTPUT

Y

VIDEO

S-VIDEO

Pb

Pr

L

L

AUDIO

R

R/Pr

B/Pb

V

L

SYNC

H

L

AUDIO

AUDIO

R

R

ANTENNA IN 75Ω

1

AUX/TV INPUT

L

PICTURE

SOUND

FEATURES
INSTALL

R

PHONO INPUT

TREBLE
BASS
BALANCE
AVL
INCR . SURROUND

POWER

Rear

of Hi-fi

SOUND

TREBLE 30

BASS
BALANCE
AVL
INCR . SURROUND

SOUND

5

7

2,4,

6

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

TV

VCR

ACTIVE

CONTROL

DN

UP

MUTE

213
546
879
0

POSITION

PIP

ACC

SURF

FREEZE

PICTURE

MENU/
SELECT

INCR . SURROUND
HEADPHONE
STEREO
SAP

AUDIO OUT FIXED

3

OR

AUDIO OUT VARIABLE

SOUND

CH

1

HEADPHONE
STEREO
SAP

AUDIO OUT

SPEAKERS OFF

OR

SPEAKERS ON

MAKING OPTIONAL SURROUND-SOUND CONNECTIONS

Connecting Accessory Devices to Your TV

*“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.

Y

our TV has extra jacks that allow you to con-

nect to an external audio amplifier system and
a powered subwoofer. This connection option will
provide a surround-sound experience similar to a
movie theater or concert hall.

To make the connections shown in this example,
you will need:

•

two cables for audio connections (standard
RCA connectors)

•four paired wires for speaker connections

• one cable for a subwoofer connection

(standard RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect from the Center Speakers out­put jacks on the amplifier with Dolby Pro

Logic* or Dolby Digital to the correspon­ding CENTER CHANNEL INPUT jacks on
the rear of the TV. Place the TV’s AMP
switch in the EXT (external) position.

2

Connect from the L(eft) and R(ight)
AUDIO OUTPUT jacks on the rear of the

TV to the L(eft) and R(ight) TV IN jacks on
the rear of the Dolby receiver.

3

Connect from the receiver’s front and
surround speaker connectors to the front

and rear surround speakers.

4

Connect from the SUBWOOFER output
jack on the rear of the TV to the L(eft) and

R(ight) Low Level Input jacks on the rear of
the powered subwoofer.

5

Set the TV’s AUDIO OUT control to
FIXED. See page 10.

The diagram below, right shows how to arrange the
speakers and subwoofer for surround sound.

• If you use a single cable to make the connec­tion to the powered subwoofer, you will need
to increase the volume on the back of the
subwoofer to compensate for the absence of
the second cable.

•You must adjust the trim of the powered sub-

woofer at the powered subwoofer. Trim refers

H

ELPFUL HINTS

11

Front Speakers

3

ANTENNA IN 75Ω

2

AMP SWITCH

EXT INT

_

+

CENTER CHANNEL AMP INPUT

Y

VIDEO

S-VIDEO

Pb

L

L

AUDIO

Pr

R

Powered Subwoofer

ANTENNA IN 75Ω

1

Rear of Amplifier with Dolby Pro Logic or Dolby Digital

INPUT-AV 2 SUBWOOFEROUTPUTINPUT-AV 1

VIDEO

S-VIDEO

L

L

AUDIO

R

NOTE: The gray circle indicates the primary viewing area.

Speaker

AMP SWITCH

EXT INT

_

+

CENTER CHANNEL AMP INPUT

Y

VIDEO

S-VIDEO

Pb

L

L

AUDIO

Pr

R

Rear of TV

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

L

L

SYNC

AUDIO

AUDIO

H

R

R

Surround-sound Setup

(Center Speakers)

Front

1

Rear of TV

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

INPUT-AV 2 SUBWOOFEROUTPUTINPUT-AV 1

VIDEO

S-VIDEO

L

L

AUDIO

R

R/Pr

B/Pb

V

L

SYNC

AUDIO

H

R

Rear of Powered Subwoofer

90

150 Hz

Crossover
Frequency

TV

L

AUDIO

R

Front

Speaker

Rear Speakers

+-

110

Volume

R

+ R – – L +

-180
Phase
0

L

+

-

o

o

4

Low
Level
Input

High
Level
Input

High
Level
Output

Powered

Subwoofer

Rear

Speaker

Rear

Speaker

12

CONNECTING A STANDARD DVD PLAYER

C

omponent video inputs allow the highest pos-

sible color and picture resolution in the play­back of digital signals, such as those of DVD
players. The color difference signals (Pb, Pr) and
the luminance (Y) signal are connected and
received separately. The result is better color
bandwidth information than is possible with com­posite video (labeled VIDEO on your TV’s jack
panel) or S-Video connections.

To make the connections shown in this example,
you will need:

• three cables for video connections (standard

RCA connectors)

•two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect the YPbPr (component)
VIDEO OUT jacks from the DVD player

to the INPUT-AV 1 YPbPr (component
video) jacks on the rear of the TV.

NOTE:The INPUT-AV 1 YPbPr jacks
will accept 480i (interlaced) output sig­nals only. The connection example on this

page assumes the use of a DVD player
with interlaced output. Some DVD play­ers, however, have YPbPr outputs that can
be switched between interlaced and pro­gressive scan. If you are attempting to use
a DVD player with progressive-scan (480p
output) capability to make the connection
shown in this example, you must be sure
to switch the DVD player to interlaced. If
necessary, refer to the DVD player’s direc­tions-for-use manual for help. If you want
to use the DVD player in progressive-scan
mode, you must use the
HD INPUT-AV 4 jacks (see page 14).

2

Connect the AUDIO OUT L(eft) and
R(ight) jacks from the DVD player to the

INPUT-AV 1 AUDIO jacks on the rear of
the TV.

3

Press the AV button on the remote con­trol as many times as necessary to select

the CVI (component video input) source
on the TV for the viewing of materials
from your DVD player.

Connecting Accessory Devices to Your TV

•To simplify making connections, the con­nectors on audio and video cables are often
color coded. The jacks on your TV are like­wise color coded to match the connectors.

• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbrevia-

tions and terms may vary, the letters B and
R stand for the blue and red color compo­nent signal connectors, respectively, and Y

indicates the luminance signal. If necessary,
refer to the directions-for-use manual for
your DVD or digital accessory for more
information.

•You can also connect a satellite receiver to
the TV in a manner similar to the example
shown on this page. If you connect a satel­lite receiver to the TV, you will need to use
the receiver’s channel-memorization system
to store channels in the receiver’s memory.

• If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc’s menu.

• CVI is not accessible in the PIP window.

See page 8 in the Quick Use and Setup
Guide for more on the PIP feature.

HELPFUL HINTS

To prevent uneven picture-tube aging, do not
leave nonmoving images or picture borders on
the screen for an extended period. See page 62.

WARNING

ANTENNA IN 75Ω

2

S-VIDEO

L

Rear of DVD Player*

PCM-MPEG2-Dolby Digital-DTS

COAXIAL

*(Example: Philips DVD model DVD712)

CVI

POWER

ACC

VCR

ACTIVE

CONTROL

FREEZE

UP

PICTURE

MENU/

SELECT

MUTE

CH

213
546
879

SURF

0

PIP ON/OFF

SLEEP

FORMAT

PROG.LISTDOLBY VAV

HOME

PERSONAL

MOVIES

PIPPOSITION

3

TV

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

ITR/

RECORD

DN

SURF

REC •

SAP

HOME
VIDEO

CENTER CHANNEL AMP INPUT

INPUT-AV 1

VIDEO

L

AUDIO

R

DIGITAL AUDIO OUT

OPT OUT

AMP SWITCH

EXT INT

+

Y

Pb

Pr

SUB WF OUT

_

1

INPUT-AV 2 SUBWOOFEROUTPUT

VIDEO

S-VIDEO

L

L

AUDIO

R

1

2

R

AUDIO OUT

Rear of TV

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

SYNC

H

1

2

PR/C

L

VIDEO OUT

R

(CVBS)

VIDEO OUT

AUDIO

L

L

AUDIO

R

R

Y

B/CB

P

(Y/C)

S-VIDEO OUT

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

ITR/

RECORD

HOME
VIDEO

HOME

MOVIES

PERSONAL

SLEEP

REC •

VCR

ACC

MENU/

SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

3

AV2

T

he S(uper)-Video connection on the rear (and

side panel) of the TV can give you better pic­ture detail and clarity for the playback of S-VHS
VCR tapes or DVDs than the normal antenna
(RF signal) or Video (composite) picture connec­tions. The example given connects a DVD/VCR
Combi unit to the INPUT-AV 2 jacks on the rear
of the TV.

NOTE: The accessory device must have an
S-VIDEO output jack to make the connection
explained on this page.

To make the connections, you will need:

• one S-Video cable

•two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect the S-VIDEO OUT jack on the

rear of the accessory device with
S-VIDEO output to the INPUT-AV 2
S-VIDEO jack on the rear of the TV.

2

Connect the DVD/VCR AUDIO OUT
jacks on the rear of the accessory device

to the INPUT-AV 2 AUDIO input jacks on
the rear of the TV.

3

Press the AV button on the remote con­trol as many times as necessary to select

the AV2 source on the TV for the viewing
of materials from your S-Video device.

Connecting Accessory Devices to Your TV

CONNECTING AN S-VIDEO DEVICE

•To simplify making connections, audio
cables are often color coded: red for the
right channel, and white for the left chan­nel. The jacks on your TV are likewise
color coded to match the connectors. To
make S-Video connections, you must use
an S-Video cable.

•You can also connect a satellite receiver,
laser-disc player, video-game player, or
other accessory device with S-Video
capability to the TV in a manner similar
to the example shown on this page.

• If you connect a satellite receiver to the
TV, you will need to use the receiver’s
channel-memorization system to store
channels in the receiver’s memory.

HELPFUL HINTS

Video sources that show a constant nonmov­ing pattern on the TV screen can cause pic­ture-tube damage. When you are not using
your video accessory devices, turn them off.
Also, regularly alternate the use of accessory
video sources with normal TV viewing. See
page 62.

WARNING

13

CENTER CHANNEL AMP INPUT

INPUT-AV 1

VIDEO

L

AUDIO

R

AMP SWITCH

EXT INT

_

+

Y

Pb

Pr

ANTENNA IN 75Ω

S-VIDEO

L

Rear of Device with
S-VIDEO Output*

DVD/VCR

OUT

AUDIO
R

VIDEO

CH3 CH4

IN

L

DVD/VCR

AUDIO OUT

L

R

ANT-IN

ANT-OUT

*(Example: Philips DVD/VCR Combi model DV910VHS)

Rear of TV

HD INPUT-AV 5

DVI

HD INPUT-AV 4

G/Y

1

SYNC

R/Pr

B/Pb

V

H

L

AUDIO

R

DIGITAL AUDIO OUT
PCM / BITSTREAM

S-VIDEO

OUT

AUDIO

OPTICAL

L

R

COMPONENT

VIDEO OUT

Y

COAXIAL

Cr

Cb

AUDIO

2

INPUT-AV 2 SUBWOOFEROUTPUT

VIDEO

S-VIDEO

L

L

R

14

T

he following instructions explain how to

connect a DVD player with progressive-scan
capability to the HD INPUT-AV 4 jacks on
your TV.

To make the connections, you will need:

• three cables for video connections (standard

RCA connectors)

•two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect from the YPrPb jacks on

the

rear of the DVD player to the

HD INPUT-

AV 4 G/Y, R/Pr, B/Pb jacks

on the rear of the TV.

2

Connect from the L(eft) and R(ight)
AUDIO OUT jacks on the rear of the

DVD player to the HD INPUT-AV 4
AUDIO L(eft) and R(ight) jacks on the rear
of the TV

.

3

Make sure the DVD player is in pro­gressive-scan mode. You will not get a
viewable picture through the HD
INPUT-AV 4 jacks if the DVD player is
in interlaced mode.

For more information on placing your
DVD player in progressive-scan mode,
see the DVD player’s directions-for-use
manual. Also, see the Helpful Hints to
the right. The way in which progres­sive-scan mode is selected varies among
DVD players.

4

Press the AV button on your TV remote
control as many times as necessary to

select the

AV4 signal source for the view­ing of materials from your progressive­scan DVD player.

If you experience difficulties receiving
sound with a DVD disc, check the sound

HELPFUL HINT

To prevent uneven picture-tube aging, do not
leave nonmoving images or picture borders on
the screen for an extended period. See page 62.

WARNING

CONNECTING A DVD P

LAYER WITH PROGRESSIVE-SCAN CAPABILITY

Connecting Accessory Devices to Your TV

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

ITR/

RECORD

HOME
VIDEO

HOME

MOVIES

PERSONAL

SLEEP

REC •

PIPPOSITION

VCR

ACC

MENU/
SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

4

AV4

• If after connecting your DVD player your
display is filled with wavy lines, it may be
that your DVD player is not set to progres­sive-scan mode. Some DVD players have an
I/P (interlaced/progressive scan) switch
located on the back or front of the players for
changing from interlaced to progressive-scan
mode. Other DVD players may allow the
mode to be changed by pressing a button on
the DVD player’s remote control or by using

the DVD player’s on-screen menu. If the

interlaced/progressive-scan selection
option is provided only through the DVD
on-screen menu, you will need to connect
the DVD player to another AV input
source in addition to HD INPUT-AV 4 to
see the DVD menu. Select this additional
AV source on screen to see the DVD menu
and choose progressive-scan mode. You
will then be able to see the DVD picture
through the AV4 source.

• Some DVD players have dedicated progres­sive-scan output jacks that are labeled as
such and require no switching to provide a
picture through the HD INPUT-AV 4 jacks.
See your DVD player’s directions-for-use
manual for information.

• The default color-space setting for the
HD INPUT-AV 4 jacks is YPbPr. RGB is
also an option. If the picture’s color looks
grossly incorrect, try changing either the
DVD player’s or TV’s color-space setting.
See the DVD player’s directions-for-use
manual for information on setting its color
space. Or see page 61 in this manual to set
the TV’s color space.

•The Picture-in-Picture (PIP) feature does
not function with AV4 or AV5.

HELPFUL HINTS

CENTER CHANNEL AMP INPUT

INPUT-AV 1

VIDEO

L

AUDIO

R

AMP SWITCH

EXT INT

+

Pb

Pr

Rear of TV

_

HD INPUT-AV 5

DVI

HD INPUT-AV 4

INPUT-AV 2 SUBWOOFEROUTPUT

Y

VIDEO

S-VIDEO

L

L

AUDIO

R

AUDIO OUT

2CH

BITSTREAM

/PCM

L

R

OPTICAL

COAXIAL

DIGITAL

1

G/Y

R/Pr

AUDIO

2

L

R

AC IN ~

B/Pb

V

L

SYNC

AUDIO

H

R

ANTENNA IN 75Ω

S-VIDEO

L

VIDEO OUT

3

Rear of DVD Player with Progressive-scan Capability

Y

VIDEO

B

P

PR

SELECT

I

S

P

• HD receivers will supply stereo sound to the TV only through the audio
left and right cables, not through the coaxial cable.

• Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv­er’s on-screen menu and a picture (valid signal) from the receiver should
it be switched to SD mode.

•The HD INPUT-AV 4 jacks are for standard RCA-type phono plugs.
Your HD receiver may use RCA or BNC output jacks. If your HD
receiver comes with BNC jacks, you will need to purchase BNC-to-RCA
adapters to connect the receiver to the TV. You should be able to pur­chase these adapters at most stores that sell electronics. Or you can call
our Customer Care Center at 1-800-531-0039.

•The HD INPUT-AV 4 jacks are compatible with some digital equipment
having RGB outputs with “sync on green” or RGB with “separate H and V
sync.” Output standards for digital equipment, however, may vary by manu­facturer. No industry standards have been established for HD television RGB
signal systems, timing, synchronization, and signal strengths. If the digital
equipment you want to connect to your TV offers both component video and
RGB outputs, component video is the suggested connection to use.

• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr.
RGB is also an option. If the picture color looks grossly incorrect, try
changing either the receiver’s or TV’s color space. See the receiver’s
directions-for-use manual for information on setting its color space. Or
see page 61 in this manual for setting the TV’s AV4 color space.

•AV4 and AV5 do not function with the PIP feature. They cannot be dis­played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.

15

CONNECTING AN HD R

ECEIVER TO THE HD INPUT-AV 4 JACKS

Connecting Accessory Devices to Your TV

BNC-to-

RCA

Adapter

BNC

Connector

Adapter

Fitted to

Connection

OR

RCA

Connector

D

igital equipment with a 1080i or 480p out­put, is compatible with the HD INPUT-AV 4

video jacks.
NOTE: This television is designed to be compati-

ble with high-definition signal standards 1080i
and 480p as specified by the Electronic Industries
Association standard EIA770.3. Because output
standards may vary by manufacturer, you may
encounter some digital equipment that will not
properly display pictures on the TV.

To make the connections shown in this example,
you will need:

• one S-VIDEO cable

• three cables for video connections (standard
RCA connectors)

•four cables for audio connections (standard
RCA connectors)

• one coaxial cable (75Ω).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect S-VIDEO and audio cables.
NOTE: This example uses

INPUT-AV 1. You can use INPUT-AV 2 or
the side input jacks if you want.

• Connect an S-VIDEO cable from the HD
receiver’s S-VIDEO jack to the TV’s
INPUT-AV 1 S-VIDEO jack.

• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s
INPUT-AV 1 L(eft) and R(ight) AUDIO
jacks.

2

Connect component video and audio
cables to the TV’s HD inputs.

• Connect from the YPRPB jacks on
the HD receiver to the TV’s HD
INPUT-AV 4 G/Y, R/Pr, B/Pb jacks.

• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s HD
INPUT-AV 4 L(eft) and R(ight) AUDIO
jacks.

3

Connect coaxial cables.

• Connect the coaxial cable lead-in from
your cable outlet, cable converter box, or
VHF/UHF antenna to the IN FROM
ANT jack on the HD receiver.

• Connect a coaxial cable from the OUT
TO TV jack to the ANTENNA IN 75Ω
jack on the TV.

• Connect the coaxial cable lead-in from a
satellite dish antenna to the SATELLITE
IN jack on the HD receiver.

4

Refer to the directions-for-use manual
that came with the HD receiver for setup
instructions.

HELPFUL H

INTS

ANTENNA IN 75Ω

3

INPUT-AV 2 SUBWOOFEROUTPUT

Y

VIDEO

1

Pb

L

AUDIO

Pr

R

VCR

DIGITAL

AUDIO OUT

Coaxial Cable Lead-in

from Cable Outlet,

Cable Converter Box,

or VHF/UHF Antenna

S-VIDEO

L

1

Rear of HD Receiver
(Example: Philips DSHD800)

INPUT-AV 1

VIDEO

S-VIDEO

L

L

AUDIO

R

AUDIO

AUDIO

Y

PB

RF

PR

REMOTEPHONE JACK

L

L

CONTROL

RR

VIDEOVIDEO

S-VIDEO

Rear of TV

HD INPUT-AV 5

DVI

HD INPUT-AV 4

OUT TO TV

CH 3
CH 4

IN FROM ANT SATELLITE IN

G/Y

R/Pr

B/Pb

V

SYNC

H

3

2

2

L

L

AUDIO

AUDIO

R

R

3

Coaxial Cable

Lead-in

from

Satellite

Dish Antenna

16

CONNECTING A C

AMCORDER

T

he side panel jacks provide a convenient way

for you to connect a camcorder to your TV.
The side panel jacks are recognized by your TV
as AV3.

You can obtain S-VIDEO quality with an S-VHS,
Hi-8, or digital camcorder by connecting to the
S-VIDEO input instead of the VIDEO (composite)
input.

To make the connections shown in this example,
you will need:

• an S-VIDEO cable

•two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect from the S-VIDEO output on

the camcorder to the S-VIDEO input in
the TV’s side panel.

2

Connect from the AUDIO outputs on
the camcorder to the side panel AUDIO

L(eft) and R(ight) inputs.

3

Press the AV button on the remote con­trol as many times as necessary to select
the AV3 source on the TV.

4

Turn the camcorder on, insert a video­tape and press PLAY to view the tape
on the TV.

Connecting Accessory Devices to Your TV

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

ITR/

RECORD

HOME
VIDEO

HOME

MOVIES

PERSONAL

SLEEP

REC •

PIPPOSITION

VCR

ACC

MENU/

SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

3

AV3

To simplify making connections, the con­nectors on audio cables are often color
coded: red for the right channel, and white
for the left channel. The jacks on your TV
are likewise color coded to match the con­nectors. To make S-Video connections, you

HELPFUL HINT

Typical

Camcorder

S-VIDEO

DV

1

Side Jack Panel

VIDEO AUDIO

LEFT RIGHT

S-VIDEO

VIDEO

L

AUDIO

R

G

2

17

CONNECTING AND U

SING HEADPHONES WITH YOUR TV

T

he HEADPHONE controls allow you to
adjust the volume and balance of the

sound going to the headphones.

1

Press the MENU/SELECT button

on the remote control to show the on­screen menu.

2

Press the CURSOR RING DOWN

once to highlight SOUND.

3

Press the CURSOR RING RIGHT

to enter the SOUND submenu.

4

Press the CURSOR RING DOWN

repeatedly until HEADPHONE is
highlighted. Then press the CURSOR
RING RIGHT to enter the
HEADPHONE submenu.

5

Press the CURSOR RING DOWN
or UP to highlight VOLUME or

BALANCE. Then press the CURSOR
RING LEFT or RIGHT to adjust the
control.

6

Press the STATUS/EXIT button to

exit the menu.

T

he TV’s side panel has a headphone jack for

personal listening.

1

Insert the headphone plug into the head­phone jack ; in the TV’s side panel.

2

Turn down the TV’s volume or press
the Mute button

cc

on the remote con-

trol to turn off the TV’s internal speakers.

See the section below for information on
adjusting headphone volume and balance.

NOTE: The headphone impedance must

be between 8 and 4,000 ohms. The head­phone jack is stereo and 3.5 mm in size.

Connecting Accessory Devices to Your TV

The AVL, INCR. SURROUND, and BASS
BOOST controls do not function with the

HELPFUL HINT

Side Jack Panel

G

1

PICTURE

MENU/
SELECT

2

MUTE

CH

SOUND

TREBLE 30

BASS
BALANCE
AVL
INCR . SURROUND

PICTURE

SOUND

FEATURES
INSTALL

2

TREBLE
BASS
BALANCE
AVL
INCR . SURROUND

STATUS/

EXIT

VOL

SOUND

6

STATUS/

2,4,

5

TV

SWAP PIP CH

SOUND

EXIT

VOL

TV/VCR

A/CH

POWER

ACC

VCR

ACTIVE

FREEZE

CONTROL

DN

UP

PICTURE

MENU/

SELECT

MUTE

213
546
879

SURF

0

POSITION

PIP

CH

3

1

SOUND

TREBLE
BASS
BALANCE
INCR . SURROUND

HEADPHONE

SOUND

HEADPHONE

VOLUME 30

BALANCE

SOUND

HEADPHONE

VOLUME

BALANCE 0

VOLUME
BALANCE

18

PROGRAMMING THE

TV REMOTE TO WORK WITH ACCESSORY DEVICES

Y

our TV remote is capable of working not

only your TV but also other infrared
remote (IR) controlled devices such as VCRs,
cable TV converter boxes, satellite receivers,
DVD players, and laser-disc players.

If you want to use your TV remote to oper­ate a VCR or other accessory device, you
will need to perform this initial check
explained in this section. You may also need
to go to the sections on the “Code-entry
Method” and the “Search Method” in the
pages that follow.

1

Press the VCR or ACC(essory)
mode button on the TV remote for

the desired accessory device category.

NOTE: Pressing the VCR mode button

allows access to product codes for
VCRs. Pressing the ACC(essory) mode
button allows access to the product
codes for cable TV converters, satellite
receivers, DVD players, and laser-disc
players.

2

Point the TV remote toward the
desired accessory device and press
the POWER button.

Does the remote turn the accessory
device on?

If yes, and try other function but-

tons on the TV remote. With a VCR,
for example, try the Play, Stop, and
Rewind buttons, for example. (See
page 23 for information on how the
remote buttons correspond with acces­sory device functions.) If they also
work the accessory device, then the
remote is ready and no further steps
are needed.

If not, do the following:
Look up a four-digit remote code

number on pages 21 or 22 for your

brand of accessory device. Then go
through the simple steps for entering a
four-digit code as explained on
page 19.

Using the Remote Control

If more than one four-digit code number is
listed, you may have to try more than the
first number given to locate your device’s

HELPFUL HINT

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND

Satellite Receiver

Cable Converter Box

DVD Player

VCR

1

TV

VCR

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

ACTIVE

CONTROL

DN

UP

MUTE

213
546
879
0

POWER

ACC

FREEZE

PICTURE

SURF

MENU/

SELECT

2

1

CH

POSITION

PIP

19

USING THE CODE-ENTRY METHOD TO PROGRAM YOUR TV REMOTE

N

ow that you have looked up the four-

digit remote-control Direct-entry Code
for your brand of accessory device, you are
ready to follow the simple steps shown below
to program your TV remote.

Please read through all the steps before
beginning.

1

First, press and hold down the VCR
or ACC (for an accessory device
other than a VCR) mode button on

the TV remote. Then press and hold
down the MENU/SELECT button at
the same time for a brief moment.
Release the buttons. The TV remote
back light will switch on.
NOTE: For correct operation, you
must first press and hold the mode
button and then press and hold the
MENU/SELECT button simultaneously.

2

Within 30 seconds of pressing the
VCR (or ACC) button and
MENU/SELECT button, enter a
four-digit code for the accessory
device (see pages 21 and 22).

If you make a mistake while attempt­ing to enter the four-digit code and
want to start again, press any button
other than one with a number. Then
return to step 1 to begin again.

3

Point the remote at the accessory
device. Then press the POWER button

on the remote to turn the device on.

Using the Remote Control

• If you do not enter a complete code within
30 seconds, you will need to perform step
1 of the Code-entry Method again.

• If you enter more than four digits, the unit
will retain the first four digits entered.

• If the procedure explained above does not

work the first time, repeat the steps using
the same remote code number.

• If after a second try the remote does not

operate your accessory device, and more
code numbers are listed for your brand,
use the next listed code number.

• If after repeated attempts the Entry-code

Method does not allow you to work your
accessory device with your TV remote, try
the Search Method explained on the next
page.

HELPFUL HINTS

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND

Satellite Receiver

Cable Converter Box

DVD Player

VCR

1

TV

VCR

SWAP PIP CH

SOUND

STATUS/

EXIT

ACTIVE

CONTROL

DN

UP

POWER

ACC

FREEZE

PICTURE

MENU/
SELECT

3

1

2

VOL

MUTE

213
546
879

TV/VCR

A/CH

0

POSITION

CH

SURF

PIP

20

USING THE S

EARCH METHOD TO PROGRAM YOUR TV REMOTE

Y

our TV remote can be set to work various

accessory devices (VCRs, cable convert­ers, and satellite receivers, for example) by
what is called the Search Method.

NOTE: The Search Method works only with
devices equipped with channel-display indi­cators on the devices themselves or the abili­ty to show channel numbers on the TV
screen. If the Code-entry Method (shown in
the previous section) did not enable your TV
remote to work your accessory device, then
follow the easy steps listed below. Please
read the steps once before performing them.

1

Turn on the desired device. Press
and hold down the VCR or ACC
(for an accessory device other than
a VCR) mode button on the TV

remote. Then press and hold down the
SURF button as you hold down the
desired mode (VCR or ACC) button.

NOTE: For correct operation, you

must press and hold down the desired
mode (VCR or ACC) button first and
then press and hold down the SURF
button second.

While holding down the SURF and
the desired mode (VCR or ACC)
buttons simultaneously, point the
remote toward the accessory device

and continue holding the buttons
down.

2

Watch the Channel Indicator on
your accessory device. Channel num-

bers will scan up when the TV remote
has identified the correct code for
your accessory device. This may take
several minutes.

3

Release the mode (VCR or ACC)
and SURF buttons as soon as chan­nel numbers start to scan up. The

scanning means that your TV remote
has found the code for your accessory
device.

NOTE:

If no channel change happens

after several minutes, repeat steps 1 and

2. Then if a channel change still does not
occur, the remote will not work with the
desired accessory device.

Using the Remote Control

•The remote’s back light will blink
as the remote moves through its
product code list. After the remote
identifies the product code for
your accessory device and you
release the remote buttons, the
back light will blink twice.

•Your TV remote may locate the
accessory device’s code quickly or
within several minutes.

• Don’t let the accessory device
scan up more than five channels
when the correct code is found—
the remote may pass up the right
code and have to repeat the search
cycle.

HELPFUL HINTS

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND

Satellite Receiver

Cable Converter Box

06

07

08

1,3

TV

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

06

09

VCR

06

POWER

ACC

VCR

ACTIVE

FREEZE

CONTROL

DN

UP

PICTURE

MENU/
SELECT

MUTE

213
546
879

SURF

0

POSITION

PIP

07

07

CH

08

09

08

09

1,3

1,3

21

DIRECT-ENTRY

CODES FOR A/V ACCESSORY DEVICES

S

EE THE NEXT PAGE FOR MORE CODES.

Using the Remote Control

VCR

CODE NUMBER

DENON . . . . . . . . . . . . . . . .0859

GE . . . . . . . . . . . . . . . . . . .0862

H

ARMAN/KARDON . . . . . . . .0871

H

ITACHI . . . . . . . . . . . . . . . .0870

JVC . . . . . . . . . . . . . . . . . .0868

KENWOOD . . . . . . . . . . . . .0865

MAGNAVOX . . . . . . . . . . . . .0860

MARANTZ . . . . . . . . . . . . . .0866

MITSUBISHI . . . . . . . . . . . . . .0861

ONKYO . . . . . . . . . . . . . . . .0860

O

PTIMUS . . . . . . . . . . . . . . .0869

P

ANASONIC . . . . . . . . . . . . .0859

PHILIPS . . . . . . . . . . . . . . . . .0866, 0860

PIONEER . . . . . . . . . . . . . . .0869, 0863

PROSCAN . . . . . . . . . . . . . . .0862

RCA . . . . . . . . . . . . . . . . . .0862, 0869

SAMSUNG . . . . . . . . . . . . . . .0870

SONY . . . . . . . . . . . . . . . . .0864

T

ECHNICS . . . . . . . . . . . . . .0859

T

HETA DIGITAL . . . . . . . . . . .0869

TOSHIBA . . . . . . . . . . . . . . .0860

YAMAHA . . . . . . . . . . . . . . .0859, 0867

ZENITH . . . . . . . . . . . . . . . .0872, 0860

DVD PLAYER

CODE NUMBER

ADMIRAL . . . . . . . . . . . . . . .0075, 0236

ADVENTURA . . . . . . . . . . . . .0027

AIKO . . . . . . . . . . . . . . . . . .0305

AIWA . . . . . . . . . . . . . . . . .0334, 0495, 0027, 0064

AKAI . . . . . . . . . . . . . . . . . .0133, 0080, 0068, 0076,

. . . . . . . . . . . . . . . . . . . . .0088, 0183, 0269

AMERICA A

CTION . . . . . . . . .0305

A

MERICAN HIGH . . . . . . . . . .0062

ASHA . . . . . . . . . . . . . . . . .0267

AUDIOVOX

. . . . . . . . . . . . . .0064

B

EAUMARK . . . . . . . . . . . . . .0267

BELL & HOWELL . . . . . . . . . .0131

BROKSONIC . . . . . . . . . . . . .0148, 0211, 0029, 0236,

. . . . . . . . . . . . . . . . . . . . .0238, 0322, 0388, 0506

CCE . . . . . . . . . . . . . . . . . .0099, 0305

CALIX . . . . . . . . . . . . . . . . .0064

CANON . . . . . . . . . . . . . . . .0194, 0062, 0129

CAPEHART . . . . . . . . . . . . . .0047

CARVER . . . . . . . . . . . . . . . .0108

CINERAL . . . . . . . . . . . . . . .0305

CITIZEN . . . . . . . . . . . . . . . .0305, 0064

COLT . . . . . . . . . . . . . . . . .0099

CRAIG . . . . . . . . . . . . . . . . .0064, 0099, 0074, 0267,

. . . . . . . . . . . . . . . . . . . . .0298

CURTIS MATHES . . . . . . . . . .0062, 0068, 0087, 0189

CYBERNEX . . . . . . . . . . . . . .0078, 0267

DAEWOO . . . . . . . . . . . . . . .0305, 0588, 0047, 0072

DAYTRON . . . . . . . . . . . . . .0047

DENON . . . . . . . . . . . . . . . .0069

DYNATECH . . . . . . . . . . . . . .0027

ELECTROHOME . . . . . . . . . . .0064

ELECTROPHONIC . . . . . . . . . .0064

EMEREX . . . . . . . . . . . . . . . .0059

EMERSON . . . . . . . . . . . . . . .0211, 0029, 0236, 0305,

. . . . . . . . . . . . . . . . . . . . .0063, 0148, 0238, 0588,

. . . . . . . . . . . . . . . . . . . . .0235, 0321, 0506, 0088,

. . . . . . . . . . . . . . . . . . . . .0115, 0239, 0027, 0064,

. . . . . . . . . . . . . . . . . . . . .0070, 0095, 0322, 0388,

. . . . . . . . . . . . . . . . . . . . .0537

FISHER . . . . . . . . . . . . . . . . .0074, 0131, 0081, 0093

FUJI . . . . . . . . . . . . . . . . . . .0060, 0062

FUNAI . . . . . . . . . . . . . . . . .0027

GE . . . . . . . . . . . . . . . . . . .0062, 0087, 0075, 0092,

. . . . . . . . . . . . . . . . . . . . .0229, 0267

GARRARD . . . . . . . . . . . . . .0027

GO VIDEO . . . . . . . . . . . . . .0306, 0459, 0553, 0259

GOLDSTAR . . . . . . . . . . . . . .0064, 0045, 0065, 0498,

. . . . . . . . . . . . . . . . . . . . .0507

GRADIENTE . . . . . . . . . . . . .0035, 0027, 0435

GRUNDIG . . . . . . . . . . . . . . .0222

HI-Q . . . . . . . . . . . . . . . . .0074

H

ARLEY DAVIDSON . . . . . . . .0027

H

ARMAN/KARDON . . . . . . . .0065, 0102, 0108

H

ARWOOD . . . . . . . . . . . . .0095, 0099

HEADQUARTER . . . . . . . . . . .0073

H

ITACHI . . . . . . . . . . . . . . . .0069, 0193, 0132, 0092,

. . . . . . . . . . . . . . . . . . . . .0027, 0068, 0109

H

UGHES NETWORK SYSTEMS .0069

JVC . . . . . . . . . . . . . . . . . .0094, 0035, 0233, 0234,

. . . . . . . . . . . . . . . . . . . . .0068, 0411

JENSEN . . . . . . . . . . . . . . . . .0068

KEC . . . . . . . . . . . . . . . . . .0064, 0305

KLH . . . . . . . . . . . . . . . . . .0099

KENWOOD . . . . . . . . . . . . .0068, 0094, 0411, 0065

KODAK . . . . . . . . . . . . . . . .0062, 0064

LXI . . . . . . . . . . . . . . . . . . .0064

LLOYD'S . . . . . . . . . . . . . . . .0027, 0235

LOGIK . . . . . . . . . . . . . . . . .0099

MEI . . . . . . . . . . . . . . . . . .0062

MGA . . . . . . . . . . . . . . . . .0070, 0088, 0267

MGN TECHNOLOGY . . . . . . .0267

MTC . . . . . . . . . . . . . . . . .0027, 0267

MAGNASONIC . . . . . . . . . . . .0305

MAGNAVOX

. . . . . . . . . . . . .0062, 0108, 0137, 0130,

. . . . . . . . . . . . . . . . . . . . .0027, 0066, 0176

M

AGNIN . . . . . . . . . . . . . . .0267

MARANTZ . . . . . . . . . . . . . .0108, 0062

MARTA . . . . . . . . . . . . . . . . .0064

MATSUSHITA . . . . . . . . . . . . .0062, 0189, 0481

MEMOREX . . . . . . . . . . . . . .0131, 0074, 0506, 0027,

. . . . . . . . . . . . . . . . . . . . .0064, 0075, 0062, 0073,

. . . . . . . . . . . . . . . . . . . . .0267, 0334, 0066, 0189,

. . . . . . . . . . . . . . . . . . . . .0236, 0481, 0828, 0829

MINOLTA

. . . . . . . . . . . . . . .0132, 0069

M

ITSUBISHI . . . . . . . . . . . . . .0200, 0088, 0102, 0241,

. . . . . . . . . . . . . . . . . . . . .0269, 0070, 0075, 0094,

. . . . . . . . . . . . . . . . . . . . .0470

MOTORO LA . . . . . . . . . . . . .0062, 0075

MULTITECH . . . . . . . . . . . . .0027, 0099

NAD . . . . . . . . . . . . . . . . .0085

NEC . . . . . . . . . . . . . . . . . .0065, 0067, 0068, 0077,

. . . . . . . . . . . . . . . . . . . . .0094, 0109, 0131

NIKKO . . . . . . . . . . . . . . . . .0064

NIKON . . . . . . . . . . . . . . . .0061, 0280

NOBLEX . . . . . . . . . . . . . . .0267

OLYMPUS . . . . . . . . . . . . . . .0062, 0253

OPTIMUS . . . . . . . . . . . . . . .0189, 0481, 0827, 0828,

. . . . . . . . . . . . . . . . . . . . .0075, 0085, 0829, 0064,

. . . . . . . . . . . . . . . . . . . . .0131, 0459

OPTONICA . . . . . . . . . . . . . .0089

ORION . . . . . . . . . . . . . . . .0506, 0029, 0211, 0236,

. . . . . . . . . . . . . . . . . . . . .0322

PANASONIC . . . . . . . . . . . . .0062, 0189, 0828, 0481,

. . . . . . . . . . . . . . . . . . . . .0253, 0104, 0405, 0829,

. . . . . . . . . . . . . . . . . . . . .0129, 0252, 0254, 0273,

. . . . . . . . . . . . . . . . . . . . .0827

PENNEY . . . . . . . . . . . . . . . .0062, 0267, 0064, 0069,

. . . . . . . . . . . . . . . . . . . . .0065, 0067, 0081

PENTAX . . . . . . . . . . . . . . . .0069, 0092, 0132

PHILCO . . . . . . . . . . . . . . . .0062, 0236, 0506

PHILIPS . . . . . . . . . . . . . . . . .0108, 0062, 0089, 0137,

. . . . . . . . . . . . . . . . . . . . .0830, 0831

P

ILOT . . . . . . . . . . . . . . . . .0064

P

IONEER . . . . . . . . . . . . . . .0085, 0195, 0094

P

OLK AUDIO . . . . . . . . . . . .0108

PORTLAND . . . . . . . . . . . . . .0047

P

ROFITRONIC . . . . . . . . . . . .0267

P

ROSCAN . . . . . . . . . . . . . . .0087, 0229

PROTEC . . . . . . . . . . . . . . . .0099

P

ULSAR . . . . . . . . . . . . . . . .0066, 0078

Q

UARTER . . . . . . . . . . . . . . .0073

QUARTZ . . . . . . . . . . . . . . .0073

QUASAR . . . . . . . . . . . . . . .0062, 0189, 0104, 0481,

. . . . . . . . . . . . . . . . . . . . .0828

RCA . . . . . . . . . . . . . . . . . .0087, 0176, 0229, 0069,

. . . . . . . . . . . . . . . . . . . . .0132, 0085, 0062, 0075,

. . . . . . . . . . . . . . . . . . . . .0092, 0104, 0133, 0267,

. . . . . . . . . . . . . . . . . . . . .0304

RADIO SHACK

. . . . . . . . . . .0027

R

ADIX . . . . . . . . . . . . . . . . .0064

RANDEX . . . . . . . . . . . . . . .0064

REALISTIC . . . . . . . . . . . . . . .0027, 0131, 0074, 0075,

. . . . . . . . . . . . . . . . . . . . .0064, 0062, 0089, 0073,

. . . . . . . . . . . . . . . . . . . . .0093

RICOH . . . . . . . . . . . . . . . . .0061, 0280

RUNCO . . . . . . . . . . . . . . . .0066

STS . . . . . . . . . . . . . . . . . .0069

SALORA . . . . . . . . . . . . . . . .0102

SAMSUNG . . . . . . . . . . . . . . .0072, 0078, 0080, 0267

SANKY . . . . . . . . . . . . . . . . .0066, 0075

SANSUI . . . . . . . . . . . . . . . .0068, 0506, 0027, 0094,

. . . . . . . . . . . . . . . . . . . . .0109, 0236, 0298

SANYO . . . . . . . . . . . . . . . . .0074, 0073, 0131, 0267

SCOTT . . . . . . . . . . . . . . . . .0211, 0238, 0148, 0070,

. . . . . . . . . . . . . . . . . . . . .0072, 0237, 0239

SEARS . . . . . . . . . . . . . . . . .0081, 0132, 0064, 0069,

. . . . . . . . . . . . . . . . . . . . .0027, 0062, 0073, 0074,

. . . . . . . . . . . . . . . . . . . . .0093, 0131

SEMP . . . . . . . . . . . . . . . . . .0072

SHARP . . . . . . . . . . . . . . . . .0075, 0089

SHINTOM . . . . . . . . . . . . . . .0099

SHOGUN . . . . . . . . . . . . . . .0078, 0267

SINGER . . . . . . . . . . . . . . . .0099

SONY . . . . . . . . . . . . . . . . .0060, 0061, 0059, 0280,

. . . . . . . . . . . . . . . . . . . . .0027, 0038, 0062

SUNPAK . . . . . . . . . . . . . . . .0280

SYLVANIA . . . . . . . . . . . . . . .0062, 0108, 0027, 0070,

. . . . . . . . . . . . . . . . . . . . .0130, 0137

SYMPHONIC . . . . . . . . . . . . .0027

TMK . . . . . . . . . . . . . . . . .0063, 0235, 0267

TATUNG . . . . . . . . . . . . . . . .0068

TEAC . . . . . . . . . . . . . . . . . .0027, 0068

TECHNICS . . . . . . . . . . . . . .0062, 0189, 0273

TEKNIKA . . . . . . . . . . . . . . .0027, 0062, 0064, 0079

THOMAS . . . . . . . . . . . . . . .0027

TOSHIBA . . . . . . . . . . . . . . .0072, 0237, 0239, 0070,

. . . . . . . . . . . . . . . . . . . . .0093, 0393

TOTEVISION . . . . . . . . . . . . .0064, 0267

UNITECH . . . . . . . . . . . . . . .0267

VECTOR . . . . . . . . . . . . . . . .0072

VECTOR RESEARCH . . . . . . . .0065, 0067

VIDEO CONCEPTS . . . . . . . . .0067, 0072, 0088, 0248

VIDEOSONIC . . . . . . . . . . . . .0267

W

ARDS . . . . . . . . . . . . . . . .0062, 0087, 0089, 0027,

. . . . . . . . . . . . . . . . . . . . .0074, 0239, 0267, 0069,

. . . . . . . . . . . . . . . . . . . . .0075, 0099, 0108, 0176

W

HITE WESTINGHOUSE . . . . .0099, 0305, 0236

XR-1000 . . . . . . . . . . . . . .0099, 0027, 0062

YAMAHA . . . . . . . . . . . . . . .0065

ZENITH . . . . . . . . . . . . . . . .0066, 0027, 0060, 0061,

. . . . . . . . . . . . . . . . . . . . .0236, 0506

TV

VCR

ACTIVE

SWAP PIP CH

CONTROL

DN

UP

SOUND

POWER

ACC

FREEZE

PICTURE

LASER-DISC PLAYER

22

DIRECT-ENTRY

CODES FOR A/V ACCESSORY DEVICES

Using the Remote Control

CABLE CONVERTER BOX

SATELLITE RECEIVER/DIGITAL SATELLITE SYSTEM

CODE NUMBER

ABC . . . . . . . . . . . . . . . . . .0030, 0028, 0034, 0035,

. . . . . . . . . . . . . . . . . . . . .0038, 0040, 0041, 0044,

. . . . . . . . . . . . . . . . . . . . .0060

ALLEGRO . . . . . . . . . . . . . . .0180, 0342

ANTRONIX . . . . . . . . . . . . . .0049, 0234

APACHE . . . . . . . . . . . . . . . .0797

ARCHER . . . . . . . . . . . . . . . .0049, 0066, 0180, 0234,

. . . . . . . . . . . . . . . . . . . . .0824

BBT . . . . . . . . . . . . . . . . . .0294

BELCOR . . . . . . . . . . . . . . . .0083

BELL & HOWELL . . . . . . . . . .0041

CABLE STAR . . . . . . . . . . . . .0083

CABLETENNA . . . . . . . . . . . .0049

CABLEVIEW . . . . . . . . . . . . .0049

CENTURY

. . . . . . . . . . . . . . .0180

C

ITIZEN . . . . . . . . . . . . . . . .0180, 0342

COLOUR VOICE . . . . . . . . . .0052, 0058

COMBAND

. . . . . . . . . . . . . .0259

C

OMTRONICS . . . . . . . . . . . .0067, 0087

CONTEC . . . . . . . . . . . . . . .0046

DIGI

. . . . . . . . . . . . . . . . . .0664

E

ASTERN . . . . . . . . . . . . . . .0029

EMERSON . . . . . . . . . . . . . . .0824

EVERQUEST . . . . . . . . . . . . . .0042, 0067

FOCUS . . . . . . . . . . . . . . . . .0427

GC ELECTRONICS . . . . . . . . .0083, 0234

GE . . . . . . . . . . . . . . . . . . .0259

GARRARD . . . . . . . . . . . . . .0180

GEMINI . . . . . . . . . . . . . . . .0042, 0097, 0269, 0824

GENERAL INSTRUMENT . . . . . .0303, 0038, 0503, 0837

GOLDSTAR . . . . . . . . . . . . . .0067, 0171

GOODMIND . . . . . . . . . . . . .0797, 0824

HAMLIN . . . . . . . . . . . . . . . .0047, 0036, 0286, 0061,

. . . . . . . . . . . . . . . . . . . . .0300

HITACHI

. . . . . . . . . . . . . . . .0038

H

YTEX . . . . . . . . . . . . . . . . .0034

JASCO . . . . . . . . . . . . . . . . .0042, 0180, 0342

JERROLD . . . . . . . . . . . . . . . .0030, 0039, 0303, 0041,

. . . . . . . . . . . . . . . . . . . . .0503, 0038, 0051, 0042,

. . . . . . . . . . . . . . . . . . . . .0837

LINSAY . . . . . . . . . . . . . . . . .0467

MACOM . . . . . . . . . . . . . . . .0060

MAGNAVOX . . . . . . . . . . . . .0054

MEMOREX . . . . . . . . . . . . . .0027

MOVIE TIME . . . . . . . . . . . . .0090, 0183

NSC . . . . . . . . . . . . . . . . . .0183, 0090, 0097

NEXUS . . . . . . . . . . . . . . . .0797

NOVAPLEX

. . . . . . . . . . . . . .0645

O

AK . . . . . . . . . . . . . . . . . .0046, 0034

OPTIMUS . . . . . . . . . . . . . . .0048

PANASONIC

. . . . . . . . . . . . .0048, 0134, 0027

P

ANTHER . . . . . . . . . . . . . . .0664

PARAGON . . . . . . . . . . . . . .0027

PHILIPS

. . . . . . . . . . . . . . . . .0052, 0058, 0269, 0317,

. . . . . . . . . . . . . . . . . . . . .0054, 0180

P

IONEER . . . . . . . . . . . . . . .0171, 0050, 0560

POPULAR MECHANICS . . . . . .0427

PRELUDE . . . . . . . . . . . . . . .0797

PULSAR . . . . . . . . . . . . . . . .0027

QUASAR . . . . . . . . . . . . . . .0027

RCA . . . . . . . . . . . . . . . . . .0048

RADIO SHACK . . . . . . . . . . .0042, 0847, 0342, 0824

REALISTIC . . . . . . . . . . . . . . .0234

RECOTON . . . . . . . . . . . . . .0427

REGAL . . . . . . . . . . . . . . . . .0300, 0047, 0286

REGENCY . . . . . . . . . . . . . . .0029

REMBRANDT . . . . . . . . . . . . .0038, 0097

RUNCO . . . . . . . . . . . . . . . .0027

SL MARX . . . . . . . . . . . . . . .0067

SAMSUNG . . . . . . . . . . . . . . .0067, 0171

SCIENTIFIC ATLANTA

. . . . . . .0035, 0044, 0033, 0504

S

EAM . . . . . . . . . . . . . . . . . .0537

SIGNAL . . . . . . . . . . . . . . . .0042, 0067

SIGNATURE . . . . . . . . . . . . . .0038

SPRUCER . . . . . . . . . . . . . . .0048

STAR SIGHT . . . . . . . . . . . . . .0569, 0449

STARCOM . . . . . . . . . . . . . . .0030, 0042

STARGATE . . . . . . . . . . . . . . .0067, 0042, 0797, 0824

STARQUEST . . . . . . . . . . . . . .0042

SYLVANIA . . . . . . . . . . . . . . .0028

TFC . . . . . . . . . . . . . . . . . .0337

TV86 . . . . . . . . . . . . . . . . .0090

TANDY . . . . . . . . . . . . . . . . .0285

TELE

CAPTION . . . . . . . . . . . .0248

T

ELEVIEW . . . . . . . . . . . . . . .0067

TEXSCAN . . . . . . . . . . . . . . .0028

TIMELESS

. . . . . . . . . . . . . . .0445

T

OCOM . . . . . . . . . . . . . . . .0039, 0040

TOSHIBA . . . . . . . . . . . . . . .0027

TUSA . . . . . . . . . . . . . . . . . .0042

UNIKA . . . . . . . . . . . . . . . . .0180, 0234, 0049

UNITED ARTISTS . . . . . . . . . .0034

UNIVERSAL . . . . . . . . . . . . . .0234, 0049, 0066, 0083,

. . . . . . . . . . . . . . . . . . . . .0180, 0218

VIEWMASTER . . . . . . . . . . . . .0847

VIEWSTAR . . . . . . . . . . . . . .0285, 0054, 0087, 0090

ZENITH . . . . . . . . . . . . . . . .0027, 0552, 0081

ZENTEK . . . . . . . . . . . . . . . .0427

CODE NUMBER

ADS . . . . . . . . . . . . . . . . . .0880

AIWA . . . . . . . . . . . . . . . . .0855

CARVER . . . . . . . . . . . . . . . .0853, 0850, 0858

DENON . . . . . . . . . . . . . . . .0851, 0849, 0875

DISCO VISION . . . . . . . . . . . .0848

FUNAI . . . . . . . . . . . . . . . . .0855

HARMAN/KARDON . . . . . . . .0853

HITACHI . . . . . . . . . . . . . . . .0848

KENWOOD . . . . . . . . . . . . .0877

MAGNAVOX

. . . . . . . . . . . . .0853, 0857, 0875

M

ARANTZ . . . . . . . . . . . . . .0853, 0850

MITSUBISHI . . . . . . . . . . . . . .0849

NAD . . . . . . . . . . . . . . . . .0849

NEC . . . . . . . . . . . . . . . . . .0879

NIKKODO . . . . . . . . . . . . . .0884

OPTIMUS . . . . . . . . . . . . . . .0849

PANASONIC . . . . . . . . . . . . .0856

PHILIPS . . . . . . . . . . . . . . . . .0853, 0850

PIONEER . . . . . . . . . . . . . . .0849, 0848

POLK AUDIO . . . . . . . . . . . .0853

QUASAR . . . . . . . . . . . . . . .0856

RCA . . . . . . . . . . . . . . . . . .0881, 0874

REALISTIC . . . . . . . . . . . . . . .0855

SAMSUNG . . . . . . . . . . . . . . .0858

SEGA . . . . . . . . . . . . . . . . . .0848

SHARP . . . . . . . . . . . . . . . . .0873

SONY . . . . . . . . . . . . . . . . .0854, 0852, 0878

TECHNICS . . . . . . . . . . . . . .0856

THETA DIGITAL

. . . . . . . . . . .0853

V

ICTOR . . . . . . . . . . . . . . . .0876

YAMAHA . . . . . . . . . . . . . . .0857

CODE NUMBER

ALPHASTAR . . . . . . . . . . . . .0799

A

MPLICA . . . . . . . . . . . . . . .0099

A

MWAY . . . . . . . . . . . . . . . .0070, 0102

A

RUNTA . . . . . . . . . . . . . . .0548

ASTRO INDUSTRIES . . . . . . . .0122

BMC . . . . . . . . . . . . . . . . .0114

BSR . . . . . . . . . . . . . . . . . .0122

CABLE INNOVATIONS . . . . . . .0581

C

APETRONIC . . . . . . . . . . . .0122

C

ENTURY . . . . . . . . . . . . . . .0565

CHANNEL MASTER . . . . . . . .0045, 0239

C

HAPARRAL . . . . . . . . . . . . .0080, 0236, 0243

C

ITOH . . . . . . . . . . . . . . . . .0191

CONIFER . . . . . . . . . . . . . . .0031

C

URTIS MATHES . . . . . . . . . .0088, 0099

DX A

NTENNA . . . . . . . . . . .0068

DRAKE . . . . . . . . . . . . . . . .0091, 0272, 0045, 0176

E

CHOSTAR . . . . . . . . . . . . . .0307, 0802, 0175, 0186,

. . . . . . . . . . . . . . . . . . . . .0296

E

XPRESSVU . . . . . . . . . . . . . .0802

GE . . . . . . . . . . . . . . . . . . .0593

G

ENERAL INSTRUMENT . . . . . .0388, 0896, 0574, 0581,

. . . . . . . . . . . . . . . . . . . . .0654

G

OULD . . . . . . . . . . . . . . . .0082

HNS . . . . . . . . . . . . . . . . . .0644

HTS . . . . . . . . . . . . . . . . . .0802

HITACHI . . . . . . . . . . . . . . . .0846

H

OMECABLE . . . . . . . . . . . . .0265

HUGHES NETWORK SYSTEMS .0776
H

YTEK . . . . . . . . . . . . . . . . .0122

IQ . . . . . . . . . . . . . . . . . . .0237

IQ P

RISM . . . . . . . . . . . . . . .0237

I

NTERSAT . . . . . . . . . . . . . . .0070

JVC . . . . . . . . . . . . . . . . . .0802

J

ANEIL . . . . . . . . . . . . . . . . .0179

J

ERROLD . . . . . . . . . . . . . . . .0388, 0654

L

EGEND . . . . . . . . . . . . . . . .0296

MACOM . . . . . . . . . . . . . . . .0088, 0045

M

AGNAVOX . . . . . . . . . . . . .0749, 0751

M

EMOREX . . . . . . . . . . . . . .0296, 0751

NEXT LEVEL . . . . . . . . . . . . .0896

NORSAT . . . . . . . . . . . . . . . .0031

P

ANASONIC . . . . . . . . . . . . .0179, 0728

P

HILIPS . . . . . . . . . . . . . . . . .0227, 0749, 0751

P

ICO . . . . . . . . . . . . . . . . . .0102

P

RIMESTAR . . . . . . . . . . . . . .0654, 0388

RCA . . . . . . . . . . . . . . . . . .0593, 0170, 0882

R

ADIO SHACK . . . . . . . . . . .0581, 0896

R

AMSEY . . . . . . . . . . . . . . . .0102

REALISTIC . . . . . . . . . . . . . . .0079, 0078

STS . . . . . . . . . . . . . . . . . .0237, 0068

SONY . . . . . . . . . . . . . . . . .0666

STAR CHOICE . . . . . . . . . . . .0896

S

TAR TRAK . . . . . . . . . . . . . .0207, 0448, 0574

S

TRONG . . . . . . . . . . . . . . . .0448

TOSHIBA . . . . . . . . . . . . . . .0109, 0776, 0817, 0088

T

OWN & COUNTRY . . . . . . .0574

U

NIDEN . . . . . . . . . . . . . . . .0265, 0079, 0101, 0397,

. . . . . . . . . . . . . . . . . . . . .0581, 0751, 0103, 0323,

. . . . . . . . . . . . . . . . . . . . .0749

ZENITH . . . . . . . . . . . . . . . .0091, 0883, 0088

TELEVISION

CODE NUMBER

MAGNAVOX . . . . . . . . . . . . .0583

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND