Philips 60PP 9352, 55PP 9352 User Manual

3135 035 20532
55PP9352 60PP9352
Product Highlights
• High-definition display—1080i/480p
• High-definition component video/RGB+H/V and DB15 inputs
• Eye Fidelity
•APAC
(Automatic Phosphor Aging
Compensation)
Features
• Multipoint digital convergence
• Protective screen filter
• Virtual Dolby
®
Surround
• 3-D Y/C comb filter
• Two-tuner picture-in-picture
• Slim, upscale styling
• Home-cinema universal remote with backlighting
Rear-projection
Rear-projection
HDTV Monitor
HDTV Monitor
2
Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-
chase at once. And take advantage of these important benefits.
Return your Warranty Registration card today to ensure you
receive all the benefits you’re entitled to.
Congratulations
on your
purchase,
and welcome to the
“family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed prod­ucts available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome–and thanks for investing in a PHILIPS product.
Sincerely,
Lawrence J. Blanford President and Chief Executive Officer
Know these
safetysymbols
t This “bolt of lightning” indicates uninsulated material within your unit may cause an electri-
cal shock. For the safety of everyone in your household, please do not remove product covering.
s The “exclamation point” calls attention to features for which you should read the enclosed
literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la
borne correspondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Warranty
Verification
Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS warranty.
Owner
Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model
Registration
Returning your Warranty Registration Card right away guar­antees you’ll receive all the infor­mation and special offers which you qualify for as the owner of your model.
P.S. Remember, to get the most from your PHILIPS
product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Visit our World Wide Web Site at http://www.philips.com
3
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or ground­ing-type plug. Apolarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manu­facturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app­aratus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental con­siderations. For disposal or recycling information, please contact your local authorities or the Electronic Industries
Alliance: www.eiae.org
16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
17. Tilt/Stability - All televisions must comply with recommend­ed international global safety standards for tilt and stability properties of its cabinet design.
• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below.
21. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclo­sure through openings.
Example of Antenna Grounding as per NEC - National Electric Code
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Rev. 8/13/01
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
(NEC SECTION 810-20)
4
CONTENTS
Items Included with This TV
As you unpack your TV, please note that this Directions for Use manual contains safety-tip information and Factory Service Center locations, as well as a Warranty Registration Card, remote control, and batteries for use with the remote control.
Please take a few minutes to complete your registration card. The serial number for the TV is on the rear of the set.
Refer to the back of this manual for instructions in the cleaning and care of the TV.
INTRODUCTION
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . .2
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
CONNECTING ACCESSORY DEVICES
TO
YOUR TV
Panel Overviews: Standard Inputs and Outputs . . . . . . . . . .6
Panel Overviews: High-definition Inputs . . . . . . . . . . . . . . .7
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting a VCR and Cable Box . . . . . . . . . . . . . . . . . . . .9
Connecting and Using an Audio Hi-fi System
with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting a Standard DVD Player . . . . . . . . . . . . . . . . . .11
Connecting a DVD Player with Progressive-scan
Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connecting an S-Video Device . . . . . . . . . . . . . . . . . . . . .13
Connecting an HD Receiver to the
HD INPUT-AV 4 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .14
Connecting an HD Receiver to the
HD INPUT-AV 5 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .15
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . .16
Connecting and Using Headphones
with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
USING THE REMOTE CONTROL
Programming the TV Remote to Work
with Accessory Devices . . . . . . . . . . . . . . . . . . . . .18
Using the Code-entry Method to Program Your
TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Using the Search Method to Program Your
TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Direct-entry Codes for A/VAccessory Devices . . . . . .21–22
Using the TV Remote with Accessory Devices . . . . . . . . .23
Using the AV and Source Select Buttons . . . . . . . . . . . . . .24
Using AutoSound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using AutoPicture™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Using AutoSurf™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Using Program List and Alternate Channel (A/CH) . . . . . .28
Using the Sleep Timer Control . . . . . . . . . . . . . . . . . . . . . .29
USING THE ONSCREEN SUBMENUS
PICTURE
Adjusting the Picture Controls . . . . . . . . . . . . . . .30
Setting the Eye Fidelity Control . . . . . . . . . . . . . . . . . . . . .31
Setting the Dynamic Contrast Control . . . . . . . . . . . . . . . .32
SOUND
Adjusting the Treble, Bass, and
Balance Controls . . . . . . . . . . . . . . . . . . . . . . . .33
Using the AVL (Audio Volume Leveler) Control . . . . . . . .34
Selecting the Surround-sound Modes . . . . . . . . . . . . . . . . .35
Selecting the Stereo/Mono Sound Mode . . . . . . . . . . . . . .36
Selecting the SAP (Second Audio Program) Feature . . . . .37
Using the Bass Boost Control . . . . . . . . . . . . . . . . . . . . . .38
FEATURES
The Timer
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Displaying the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Setting the Timer’s Start Time and Stop Time . . . . . . . . .41
Selecting the Timer’s Channel . . . . . . . . . . . . . . . . . . . . .42
Setting the Timer’s Activate Control . . . . . . . . . . . . . . . .43
AutoLock™
Understanding AutoLock™ . . . . . . . . . . . . . . . . . . . . . . .44
Setting up the AutoLock™Access Code . . . . . . . . . . . . .45
Using AutoLock™ to Block Channels . . . . . . . . . . . . . . .46
Using AutoLock™ to Block by Movie Rating . . . . . . . . .47
Using AutoLock™ to Block by TV Rating . . . . . . . . . . .48
Turning the AutoLock™ Blocking Control
on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Using AutoLock™ to Block Unrated Broadcasts . . . . . . .50
Using AutoLock™ to Block Broadcasts That
Have No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Reviewing Your Currrent AutoLock™ Settings . . . . . . . .52
Using the Closed Captioning Control . . . . . . . . . . . . . . . . .53
Using the Picture-format Control . . . . . . . . . . . . . . . . .54–55
Using Active Control™ . . . . . . . . . . . . . . . . . . . . . . . . . . .56
APPENDIXES
Appendix A: Compatibility Information
for the TV’s High-definition Inputs . . . . . . . . .57
Appendix B: Model Specifications . . . . . . . . . . . . . . . . . . .58
Appendix C: Setting Color Space for the HD Inputs . . . . . . .59
GENERAL INFORMATION
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61–62
Glossary of Television Terms . . . . . . . . . . . . . . . . . . . . . . .63
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . .65–66
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Refer to the simple Quick Use and Setup Guide (supplied with your TV) for details on
the following:
• Basic TV connections
• Television and remote-control operation
• Onscreen menu controls
• How to use the installation features.
QUICK USE AND SETUP GUIDE
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
MENU/
STATUS/
SELECT
EXIT
ppendixes
BC
A
Quick Use and Setup Guide
Quick Use and Setup Guide
CONTENTS
Important Notice/Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Making Basic TVConnections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–2
Operating the Television and Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .2–4
Using the Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–6
Using the Picture-in-Picture (PIP) Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Adjusting the Manual Converge Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MAKING BASICTV CONNECTIONS
BESTVIEWING
he major benefit of this projection television is its large view-
T
ing screen. To see this large screen at its best, test various
locations in the room to find the optimal spot for viewing.
NOTE:Be sure to allow a free flow of air to and from the per­forated back cover of the set.
CABLESAND CONNECTORS
f you are new to making TVhookups, you may want to read
I
this section. (The cables and connectors discussed are not sup­plied with your set. You can buy them at most stores that sell audio or video products. Or call our Customer Care Center at 1-800-531-0039.) This publication provides you with examples of basic connections. See pages 6–17 in the Directions for Use manual for more infor­mation on connections, along with connection examples.
A75-ohm coaxial cableconnects signals from an antenna or a cable TVcompany to the antenna jack on the back of the TV. Coaxial cables use “F” connectors. Atwo-way signal splitterenables you to take a single antenna or cable TVsignal and supply it to two different inputs.
ANTENNAOR CABLETV
his section shows you how to make a basic TVconnection
using a cable TVor antenna signal.
T
If you have cable TVservice, you’ll simply connect the coaxial cable lead-in from the cable TVcompany to your TV. If you intend to connect a VHF/UHF antenna, you may need a 300- to 75-ohm adapter, which is not supplied with your TV. NOTE:You should be able to buy optional accessories such as a VHF/UHF antenna or a 300- to 75-ohm adapter at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
Connect the Cable TVorantenna signal to the ANTENNAIN 75jack on the rear of the TV.
1
NOTE: If you are using an antenna with a round coaxial cable (75), then you are ready to connect to the back of the TV. If your antenna has a flat, twin-lead wire (300), you must first attach the antenna wires on a 300- to 75­ohm adapter. Then push the round end of the adapter onto the ANTENNAIN 75jack on the rear of the TV.
Insert the TV’s powerplug into the wall power outlet.
2
As an Energy Star® Partner, Philips Consumer Electronics has determined this product meets the Energy Star®guidelines for energy efficiency. Energy Star®is a U.S. registered mark. Using products with the Energy Star®label can save energy. Saving energy reduces air pollution and lowers utility bills.
To avoid cabinet warping, cabinet color changes, and increased chance of set failure, do not place
where temperatures can become excessively
the TV hot—for example, in direct sunlight or near a heating appliance.
A300- to 75-ohm twin-lead adapteraccepts the antenna
cables (called twin-lead wires) from an antenna, allowing you to connect the antenna signal to the TV.
Video and audio cables
with standard RCA (phono) connectors con­nect the video and audio jacks of accessory devices such as VCRs and DVD players to the jacks on the TV. To simplify making connections, the connectors are usually color coded. The jacks on your TVare likewise color coded to match the colors of the connectors. The coding is as follows: yellow for video (composite) and red and white for the right and left audio channels, respectively. Use an audio cable with a white connector when making mono,
Coaxial Cable Lead-in from
Cable TV Company
Coaxial Cable
OR
300- to 75-ohm
Adapter
Twin-lead Wire
Coaxial Cable
Lead-in from Antenna
Rear-projection
Rear-projection
HDTV Monitor
HDTV Monitor
IMPORTANT
NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessar­ily match those found with yourtelevision set. This is normal and does not require that you con­tact yourdealeror request service. WARNING: TO PREVENTFIRE OR SHOCK HAZARD DO NOTEXPOSE THIS UNITTO RAIN OR EXCESSIVE MOISTURE.
Magnetic fields, such as those of external speak­ers, may cause the picture to distort if the speak­ers are placed too close to the television. Move the magnetic field source away from the TVuntil there is no picture distortion.
or nonstereo, connections. The connectors of video cables used to connect component video or RGB (high-resolution) jacks are often color coded red, green, and blue. Component video connec­tions provide you with the highest possible color and picture resolution. An S-Video cableconnects devices such as DVD players, VCRs, or camcorders to your TV. S-Video provides better picture per­formance than regular (com­posite) video connections. S-Video cables can be used only with S-Video-compatible accessory devices. You must also connect the left and right audio cables along with S-Video because the S-Video jack carries only the picture signal, not the sound. ADB15 cablemakes an RGB connection to the HD INPUT-AV5 jack on the rear of the TV.
Cable TV Company
1
ANTENNA IN 75
Rear of TV
INPUT-AV 1 OUTPUT
Y VIDEO S-VIDEO
Pb L
AUDIO
Pr R
Outdoor or Indoor Antenna (Combination VHF/UHF)
The combination antenna receives normal broadcast channels 2–13 (VHF) and 14–69 (UHF).
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
INPUT-AV 2
B/Pb VIDEO S-VIDEO
V
L
L
L
SYNC
AUDIO
AUDIO
AUDIO H R
R
R
3135 035 20751
5
FEATURES
Your new projection television and its packaging contain materials that can be recycled and reused. Specialized companies can recy­cle your product to increase the amount of reusable materials and minimize the amounts that need to be properly disposed. The bat­teries used by your product should not be thrown away when depleted but should be handed in and disposed of as small chemi­cal waste. Please find out about the local regulations concerning how to dispose of your old television, batteries, and packaging materials whenever it is time to replace them.
End-of-life Disposal
Active Control™ continuously measures and corrects all incoming signals to provide the best picture settings. This feature provides a sharp and virtually noise-free picture any time, from any NTSC source. NTSC is the
National Television Standards Committee for­mat devised in the 1940s for TV broadcast analog video signals (525 lines: 30 Hz). Alternate Channel (A/CH) button allows you to switch back and forth between the currently viewed channel and the previously viewed channel. Automatic Phosphor Aging Compensation (APAC) works with the set’s Automatic Format feature to prevent screen burn left by nonmoving images. Periodically, APAC automatically shifts your television picture in very small increments, but in increments large enough to blur image retention. APAC is like a screen saver for your TV. Audio/video jacks allow direct connections with VCRs and other accessories for quality TV picture and sound playback. Component video input jacks are provided for high-fidelity color and picture resolution when using digital video source material, such as a DVD. Audio Volume Leveler (AVL) control keeps the TV’s sound at an even level. Peaks and valleys that occur during program changes or commercial breaks are reduced, making for a more consistent, comfortable sound. AutoChron™ automatically sets the right time of day and main­tains it with digital precision through brownouts, power failures, and even Daylight Savings Time adjustments. AutoLock™ protects young children from objectionable program­ming with V-chip technology. Automatic Format automatically detects the incoming signal’s format and adjusts it to fill the screen. Also, your remote control has a Format button that allows you to select the picture format you want to see. AutoPicture™ allows you to push a button and adapt your TV’s picture to various types of programs, such as sports, movies, and multimedia (games). AutoSound™ allows you to select from three factory-set controls and a personal control that you set according to your own prefer­ences through the onscreen Sound submenu. The three factory-set controls—Voice, Music, and Theatre—enable you to tailor the TV sound to enhance the particular programming you are watching. AutoSurf™ allows you to easily switch among only the channels that are of interest to you. You can program up to 10 channels into the TV’s AutoSurf™ memory through the onscreen display. Channel Edit allows you to add or remove channels from the list of channels stored in the TV’s memory. Channel Edit makes it easy to limit or expand the number of channels that are available to you when you press the CH +/– buttons on your remote control. Closed Captioning allows you to read TV program dialog or voice conversations as onscreen text.
Virtual Dolby* Surround (referred to as DOLBY VIRTUAL in the onscreen submenu) uses two speakers to simulate the sur-
round effect produced by a multichannel system. Dynamic Contrast helps you sharpen the picture quality by mak­ing the contrast between the dark and bright picture areas more noticeable as the image on screen changes. Eye Fidelity gives you a choice between two different picture­scanning techniques—progressive and interlaced. Progressive scan doubles the number of visible picture lines per field by displaying all picture frame lines at once, eliminating line flicker. The inter­laced mode provides for a double vertical display (interlaced) of progressive scan, which reduces annoying motion artifacts. The Interlaced mode also helps smooth out jagged lines sometimes seen on curved and angled surfaces.
High-definition component video inputs allow you to connect High-definition signals to the TV (HD INPUT-AV 4 only). The result is superb color purity, crisp color detail, and reduced color noise. Your set provides separate HD inputs for YPbPr/RGB, as well as horizontal and vertical sync. Hi-fi stereo system, including a built-in audio amplifier and a twin speaker system. The system enables you to hear stereo sound or Second Audio Program (SAP) bilingual broadcasts when they are available. Home-cinema universal remote control operates your TV set and other devices that work by infrared remote control, such as VCRs, cable converter boxes, satellite receivers, and others. Note: You may need to program the remote to work with devices other than the TV. See pages 18–23. Incredible Surround™ enhances stereo programs by making the sound broader and fuller. Onscreen menu shows the TV controls and allows you adjust or set those controls (can be viewed in American English, French, or Spanish). Program List displays a list of your favorite channels at the press of a button. You can scroll through the list, highlight a favorite channel, and tune to the channel. Protective screen filter helps prevent accidental damage to the del­icate front lenticular screen. Anyone with children or pets knows accidents can happen in the home—especially when parents aren’t watching. The protective screen filter is specifically formulated by Philips for HD displays to protect your investment while giving the best possible picture. Sleep Timer automatically turns the TV off after a set amount of time of your choice. Standard broadcast (VHF/UHF) or cable TV (CATV) channel capability, as well as advanced capability for high-definition video. 3-D Y/C Digital Comb Filter (activated when using the tuner and composite inputs) processes the video with spatial and temporal fil­tering, virtually eliminating cross-color and cross-luminance inter­ference, improving video resolution. This filter uses extensive mem­ory to analyze complete video fields, significantly reducing “dot crawl,” “hanging dots,” and “barber pole artifacts” on the image. Two-tunerPicture-in-picture (PIP) allows you to monitor one video source while watching another. Access your favorite shows on the main screen with tuner one while scanning other channels in the PIP window with tuner two. No VCR is needed for PIP tuning.
As an Energy Star® Partner, Philips Consumer Electronics has determined this product meets the Energy Star® guidelines for energy efficiency. Energy Star® is a U.S. registered mark. Using products with the Energy Star® label can save energy. Saving
energy reduces air pollution and lowers utility bills. Active Control, APAC, AutoPicture, AutoSound, AutoSurf, and Incredible Surround are trademarks of Philips Consumer Electronics North America. Copyright 2002 Philips Consumer Electronics. *Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
6
Connecting Accessory Devices to Your TV
Y
ou can connect a wide range of video and
audio devices to your TV, in various ways. This page and the next one provide an overview of signal compatibilities and the types of devices you can connect to the jacks. Connection examples follow on subsequent pages. See pages 1 and 2 of the Quick Use and Setup Guide that came with your set for exam­ples of basic connections. You may also want to refer to the user instructions that came with each particular device for information on con­nections.
What You Can Connect to the
Standard Panel Jacks
1
ANTENNA IN 75jack—use to con­nect radio-frequency (RF) signals from VHF/UHF antennas or a cable system. These are 480i signals.
2
YPbPr (component video input [CVI] jacks)—compatible with 480i signals
only. Use to connect accessories having component video outputs, such as DVD players, laser-disc players, video-game players, satellite receivers, or other devices. Use the INPUT-AV 1 L(eft) and R(ight) AUDIO jacks for sound connec­tions. CVI cannot be displayed in the PIP window.
3
S-VIDEO (super video) jacks—com­patible with 480i signals only. Use to connect accessories having Super VHS (S-VHS) outputs, such as VCRs, DVD players, laser-disc players, video-game players, satellite receivers, or other devices.
4
VIDEO (composite) jacks (INPUT-AV
1, INPUT-AV 2, and TV’s side jack panel [AV3])—compatible with 480i signals
only. Use to connect accessories having composite video outputs, such as VCRs, video-game players, or other devices.
5
AUDIO inputs (INPUT-AV 1, INPUT-AV 2, and TV’s side jack panel [AV3])—use to connect from the audio
output jacks on VCRs, DVDs, or other accessories.
6
OUTPUT (VIDEO/AUDIO)—video is compatible with 480i signals only. Use to connect to a VCR to record programs from the TV. Or use the AUDIO outputs to connect to an audio hi-fi system.
7
n Headphone jack—use to connect headphones for personal listening.
• Signals connected to the HD INPUT-AV 4 or HD INPUT-AV 5 inputs will provide you with the best picture. Examples of sources for such signals are a progressive­scan DVD player (480p) or an HD receiver (1080i or 480p) with YPbPr or RGB out­puts. The 1080i signals will provide you with the best picture possible. Devices with RGB outputs may or may not have H and V sync outputs to connect to the HD INPUT-AV 4 H and VSYNC inputs (see page 57). Instructions for selecting the HD INPUT-AV 4 and AV 5 color space (YPbPr or RGB) are on page 59.
• Among the 480i-compatible inputs (ANTENNA IN 75, INPUT AV-1, INPUT AV-2, and the side jack panel), you will get the best picture from the compo­nent video inputs (labeled YPbPr). The S-Video inputs will provide the next-best level of picture quality.
HELPFUL HINTS
PANEL OVERVIEWS
:STANDARD INPUTS AND OUTPUTS
The side jack-panel inputs (recognized by the TV as AV3) are convenient for connecting a camcorder. See page 16.
cc
C
HECK IT OUT
Summary of signal compatibilities
Input jacks on TV
Compatible output signal
from an external source
or device
ANTENNA IN 75, INPUT AV-1,
INPUT AV-2, and side jack panel (AV3)
480i (480 lines, interlaced)
ANTENNA IN 75
1
Rear of TV
6
4
INPUT-AV 1
VIDEO
S-VIDEO
L
AUDIO
R
3
5
OUTPUT
Y
Pb
Pr
2
4
INPUT-AV 2
VIDEO
S-VIDEO
L
AUDIO
R
3
5
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
L
SYNC
AUDIO
H
R
AUDIO
L
R
Side Jack Panel
3
4
G
5
7
NOTE: The TV recognizes the side jack panel as AV3.
7
Connecting Accessory Devices to Your TV
PANEL OVERVIEWS
:HIGH-DEFINITION INPUTS
T
he HD INPUT-AV 4 and HD INPUT-AV 5 jacks allow you to digital equipment with
1080i or 480p signal output.
What You Can Connect to the
High-definition Input Jacks
1
HD INPUT-AV 4—use to connect digi­tal equipment with a 1080i or a 480p signal output, such as HD receivers (1080i or 480p) or DVD players with progressive-scan capability (480p). You can connect equipment with YPbPr component video or RGB outputs to the HD INPUT-AV 4 jacks. H and VSync connections may or may not be required for RGB connections. (See
page 57.) Dedicated audio input jacks are located with the HD INPUT-AV 4 video jacks.
NOTE: The Picture-in-Picture (PIP) feature does not function with AV 4.
2
HD INPUT-AV 5—use to connect digital equipment with a 1080i or a 480p signal output, such as HD receivers (1080i or 480p) or DVD players (480p). The HD INPUT-AV 5 jack accepts a DB15 connector. Dedicated audio input jacks are located with the HD INPUT-AV 5 video jack.
NOTE: The Picture-in-Picture (PIP) feature does not function with AV5.
Summary of signal compatibilities
Input jacks on TV
Compatible output signal
from an external source
or device
HD INPUT-AV 4 and HD INPUT-AV 5
1080i (1080 lines, interlaced) or 480p (480 lines, progressive scan)
• The TV’s default color-space setting for HD INPUT-AV 4 is YPbPr, and for HD INPUT-AV 5 it is RGB. If the picture looks grossly incorrect, try changing the color-space setting on either the digital equipment or the TV. For more informa­tion on setting the color space on the dig­ital equipment, see the equipment’s direc­tions-for-use manual. To set the TV’s color space, see page 59 in this manual.
• This television is designed to be compatible with high-definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Because output standards may vary by man­ufacturer, you may encounter some digital equipment that will not properly display pic­tures on the TV.
• The Picture-in-Picture (PIP) feature does not function with the HD INPUT-AV 4 or HD INPUT-AV 5 signal sources. AV4 and AV5 cannot be displayed in the PIP win­dow, nor can the PIP window be dis­played when either AV4 or AV5 is being viewed on the main screen.
HELPFUL HINTS
ANTENNA IN 75
Rear of TV
INPUT-AV 1
VIDEO
S-VIDEO
L
AUDIO
R
OUTPUT
Y
Pb
Pr
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
AUDIO
VIDEO
L
R
INPUT-AV 2
S-VIDEO
SYNC
R/Pr
B/Pb
V
L
AUDIO
H
R
1
L
AUDIO
R
2
8
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
ITR/ HOME HOME PERSONAL
SLEEP
REC •
VCR
ACC
MENU/ SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
5
AV1
a
T
he TV’s audio/video (AV) input jacks provide
for direct picture and sound connections between the TV and accessory devices such as VCRs, DVD players, and others that have AV out­put jacks.
This example, which uses the INPUT-AV 1 jacks, shows you one way you can connect a VCR to your TV.
Refer to the directions-for-use manual for your VCR for further information on connections.
To make the connections shown in this example, you will need:
• one coaxial cable (75Ω)
• one cable for a video connection (standard
RCA connector)
• two cables for audio connections (standard
RCA connectors) (only one cable is needed for a nonstereo VCR).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039
1
Connect a cable TV or antenna signal to the ANT IN jack on the rear of the VCR.
2
Connect from the OUT jack on the rear of the VCR to the
ANTENNA IN 75
jack on the rear of the TV.
3
Connect the VIDEO OUT jack on the rear of the VCR to the INPUT AV1 VIDEO jack on the rear of the TV.
4
Connect the audio output R(ight) and L(eft) jacks on the rear of the VCR to the
INPUT-AV 1 AUDIO jacks on the rear of the TV.
NOTE: If the VCR is a mono (nonstereo) unit, connect only the left audio cable, which usually has a white connector.
5
Press the AV button on the remote con­trol as many times as necessary to select
the AV1 source.
6
Turn the VCR on and press PLAY to view a videotape on the TV.
Connecting Accessory Devices to Your TV
CONNECTING A VCR
BEGIN
To simplify making connections, audio and video cables often have color-code connec­tors. The jacks on your TV are likewise color coded to match the connectors. The coding is as follows:
• Yellow for video (composite)
• Red for the right audio channel
• White for the left audio channel
NOTE: If your VCR is mono (non­stereo), you will connect only one audio cable. You must ensure that the TV is set to MONO for the signal source to which you’ve connected the VCR (
INPUT-AV
1, INPUT-AV2, or the side panel inputs [AV3]). Otherwise, you will receive sound from only one of the TV’s speakers. See page 36.
HELPFUL
HINT
Y ou can display the A V1, AV2, or A V3 signal sources in the PIP window. See page 7 of the Quick Use and Setup Guide for information on using the Picture-in-Picture (PIP) feature.
cc
C
HECK IT OUT
ANTENNA IN 75
2
3
INPUT-AV 1
VIDEO
S-VIDEO
L
AUDIO
R
Rear of VCR*
* (Example: Philips VCR model VR674CAT)
Rear of TV
OUTPUT
4
Y
Pb
Pr
AUDIO
VIDEO
L
R
INPUT-AV 2
S-VIDEO
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
SYNC
AUDIO
H
L
L
Coaxial Cable
AUDIO
R
Lead-in from
R
Cable TV Company
or VHF/UHF Antenn
1
AUDIO
L
ANT
IN
IN
OUT
R
VIDEO
OUT
CH3 CH4
IN
OUT
9
CONNECTING A VCR
AND CABLE BOX
P
resented here is a connection example
involving a VCR and cable box.
Refer to the VCR’s directions-for-use manual for further information on connections.
To make the connections in this example, you will need:
• one, two-way signal splitter
• two coaxial cables (75Ω)
• one cable for a video connection (standard RCA connector)
• two cables for audio connections (standard RCA connectors) (only one cable is needed for connection to a nonstereo VCR).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect a cable TV signal to a two­way signal splitter.
2
Connect one of the two-way signal splitter outputs to the INPUT on the
cable box.
3
Connect the other two-way signal splitter output to the ANTENNA IN
75on the rear of the TV.
4
Connect from the cable box OUTPUT jack to the ANT IN jack on the rear of
the VCR.
5
Connect the VIDEO OUT jack on the VCR to the INPUT-AV 1 VIDEO
jack on the rear of the TV.
6
Connect the AUDIO OUT R(ight) and L(eft) jacks on the VCR to
INPUT-AV 1 AUDIO jacks on the rear of the TV.
NOTE: If the VCR is a nonstereo unit, connect only the left audio cable, which usually has a white connector.
7
Press the AV button on the remote control as many times as necessary
to select the AV1 source.
8
Turn the VCR on and push PLAY to view a videotape.
Connecting Accessory Devices to Your TV
BEGIN
To simplify making connections, the connectors on audio and video cables are often color coded. The jacks on your TV are likewise color coded to match the connectors. The coding is as follows:
• Yellow for video (composite)
• Red for the right audio channel
• White for the left audio channel
NOTE: If your VCR is mono (nonstereo), you will connect only one audio cable. You must ensure that the TV is set to MONO for the signal source to which you’ve connected the VCR (INPUT-AV 1, INPUT-AV 2, or the side panel inputs [AV3]). Otherwise, you will receive sound from only one of the TV’s speakers. See page 36.
HELPFUL HINT
Rear of VCR*
* (Example: Philips
VCR model VR674CAT)
AV1
ANTENNA IN 75
3
Rear of TV
5
INPUT-AV 1
OUTPUT
6
AUDIO
Y
Pb
L
R
Pr
AUDIO
Two-way
Signal
Splitter
S-VIDEO
VIDEO
1
HD INPUT-AV 4
INPUT-AV 2
VIDEO
S-VIDEO
L
R
Coaxial Cable Lead-in from
Cable TV Company
or VHF/UHF Antenna
HD INPUT-AV 5
G/Y
R/Pr
B/Pb
V
SYNC
AUDIO
H
L
L
AUDIO
R
R
4
AUDIO
L
ANT
IN
IN
OUT
R
VIDEO
OUT
CH3 CH4
IN
OUT
Rear of Cable Box
OUTPUT
INPUT
2
7
TV
VCR
SWAP PIP CH
DN
UP
SOUND
STATUS/
EXIT
VOL
MUTE
213 546 879
TV/VCR
A/CH
0
SURF
REC
FORMAT
SAP
ITR/ HOME HOME PERSONAL
ACTIVE
CONTROL
PIP ON/OFF
SLEEP
POWER
ACC
FREEZE
PICTURE
MENU/ SELECT
CH
SURF
PROG.LISTDOLBY VAV
10
CONNECTING AND U
SING AN AUDIO HI-FI SYSTEM WITH YOUR TV
Y
ou can use your TV’s AUDIO OUTPUT jacks
to connect to an external audio hi-fi system.
Follow the simple steps below. To make these connections, you will need two
cables for audio connections (standard RCA). NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect from the L(eft) and R(ight) AUDIO OUTPUT jacks on the rear of the
TV to the L(eft) and R(ight) AUX/TV INPUT jacks on the rear of the hi-fi system.
2
See the section below on using the AUDIO OUT control.
A
fter connecting the TV’s AUDIO OUTPUT
jacks to the AUDIO INPUT jacks on an external hi-fi system, set the AUDIO OUT control in the SOUND submenu to either VARIABLE or FIXED to determine whether you adjust the volume at the TV or at the external hi-fi system. To change the volume at the TV using the TV’s remote control, you must select VARIABLE. To adjust the volume at the stereo using the hi-fi’s controls, you must select FIXED. You can also use the SPEAKERS control in the SOUND submenu to turn the TV’s speakers off.
1
Press the MENU/SELECT button
on the remote control to show the onscreen menu.
2
Press the CURSOR RING DOWN
once to highlight SOUND.
3
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
4
Press the CURSOR RING DOWN
repeatedly until AUDIO OUT is high­lighted.
5
Press the CURSOR RING LEFT or RIGHT to set the AUDIO OUT to
either VARIABLE or FIXED.
6
If you want to turn the TV’s internal speakers off, press the CURSOR RING DOWN repeatedly until
SPEAKERS is highlighted. Then press the CURSOR RING LEFT or RIGHT to turn the speakers off.
7
Press the STATUS/EXIT button to exit the menu.
Connecting Accessory Devices to Your TV
BEGIN
BEGIN
The sound outputs from the TV to an exter­nal hi-fi system are not affected or tailored by the TREBLE, BASS, BALANCE, AVL, INCR. SURROUND, and BASS BOOST controls in the TV’s SOUND submenu.
HELPFUL HINT
ANTENNA IN 75
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
SYNC
H
L
L
AUDIO
AUDIO
R
R
S-VIDEO
Rear of TV
OUTPUT
INPUT-AV 2
VIDEO
S-VIDEO
L
AUDIO
R
INPUT-AV 1
Y
VIDEO
Pb
L
AUDIO
Pr
R
1
AUX/TV INPUT
L
PICTURE
SOUND
FEATURES INSTALL
R
PHONO INPUT
TREBLE BASS BALANCE AVL INCR . SURROUND
POWER
Rear
of Hi-fi
SOUND
TREBLE 30
BASS BALANCE AVL INCR . SURROUND
SOUND
5
7
2,4,
6
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
TV
VCR
ACTIVE
CONTROL
DN
UP
MUTE
213 546 879 0
POSITION
PIP
ACC
FREEZE
PICTURE
SURF
SELECT
INCR . SURROUND HEADPHONE STEREO SAP
AUDIO OUT FIXED
3
OR
MENU/
CH
1
AUDIO OUT VARIABLE
SOUND
HEADPHONE STEREO SAP AUDIO OUT
SPEAKERS OFF
OR
SPEAKERS ON
11
CONNECTING A STANDARD DVD PLAYER
C
omponent video inputs allow the highest pos-
sible color and picture resolution in the play­back of digital signals, such as those of DVD players. The color difference signals (Pb, Pr) and the luminance (Y) signal are connected and received separately. The result is better color bandwidth information than is possible with com­posite video (labeled VIDEO on your TV’s jack panel) or S-Video connections.
To make the connections shown in this example, you will need:
• three cables for video connections (standard
RCA connectors)
• two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect the YPbPr (component) VIDEO OUT jacks from the DVD player
to the INPUT-AV 1 YPbPr (component video) jacks on the rear of the TV.
NOTE: The INPUT -AV 1 YPbPr jacks will accept 480i (interlaced) output sig­nals only.The connection example on this
page assumes the use of a DVD player with interlaced output. Some DVD play­ers, however, have YPbPr outputs that can be switched between interlaced and pro­gressive scan. If you are attempting to use a DVD player with progressive-scan (480p output) capability to make the con­nection shown in this example, you must be sure to switch the DVD player to inter­laced. If necessary, refer to the DVD play­er’s directions-for-use manual for help. If you want to use the DVD player in pro­gressive-scan mode, you must use the HD INPUT-AV 4 jacks (see page 12).
2
Connect the AUDIOOUT L(eft) and R(ight) jacks from the DVD player to the
INPUT-AV 1 AUDIO jacks on the rear of the TV.
3
Press the AV button on the remote con­trol as many times as necessary to select
the CVI (component video input) source on the TV.
4
Turn the DVD player on and press PLAY to view the DVD program on the TV.
Connecting Accessory Devices to Your TV
• T o simplify making connections, the connec­tors on audio and video cables are often color coded. The jacks on your TV are likewise color coded to match the connectors.
• The names for the component video jacks may differ depending on the DVD player or accessory digital source equipment used. For example, besides YPbPr, you may see R-Y/B-Y/Y; or CrCbY. Although abbrevia­tions and terms may vary, the letters Band R stand for the blue and red color component signal connectors, respectively, and Yindicates the luminance signal. If necessary, refer to the directions-for-use manual for your DVD or digital accessory for more information.
• You can also connect a satellite receiver to the TV in a manner similar to the example shown on this page. If you connect a satellite receiver to the TV, you will need to use the receiver’s channel-memorization system to store chan­nels in the receiver’s memory.
• If you experience difficulties receiving sound with a DVD disc, check the sound settings through the DVD disc’s menu.
• The CVI source cannot be displayed in the PIP window. See page 7 in the Quick Use and Setup Guide for more on the PIP feature.
HELPFUL HINTS
To prevent uneven picture-tube aging, do not leave nonmoving images or picture borders on the screen for an extended period. See page 60.
WARNING
BEGIN
ANTENNA IN 75
2
S-VIDEO
Rear of DVD Player*
PCM-MPEG2-Dolby Digital-DTS
COAXIAL
*(Example: Philips DVD model DVD712)
CVI
POWER
ACC
VCR
ACTIVE
CONTROL
FREEZE
UP
PICTURE
MENU/
SELECT
MUTE
CH
213 546 879
SURF
0
PIP ON/OFF
SLEEP
FORMAT
PROG.LISTDOLBY VAV
HOME
HOME
PERSONAL
VIDEO
MOVIES
PIPPOSITION
3
TV
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
ITR/
RECORD
DN
SURF
REC
SAP
INPUT-AV 1
VIDEO
L
AUDIO
R
DIGITAL AUDIO OUT
OPT OUT
Rear of TV
OUTPUT
Y
Pb
Pr
SUB WF OUT
1
VIDEO
L
AUDIO
R
INPUT-AV 2
S-VIDEO
1
2
R
AUDIO OUT
L
(CVBS)
VIDEO OUT
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
L
SYNC
AUDIO
H
1
2
PR/C
R
VIDEO OUT
L
AUDIO
R
R
Y
B/CB
P
(Y/C)
S-VIDEO OUT
T
he following instructions explain how to
connect a DVD player with progressive-scan capability to the HD INPUT-AV 4 jacks on your TV.
To make the connections, you will need:
• three cables for video connections (standard
RCA connectors)
• two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect from the YPrPb jacks on the
rear of the DVD player to the
HD INPUT-
AV 4 G/Y, R/Pr, B/Pb jacks
on the rear of the TV.
2
Connect from the L(eft) and R(ight) AUDIO OUT jacks on the rear of the
DVD player to the HD INPUT-AV 4 AUDIO L(eft) and R(ight) jacks on the rear of the TV
.
3
Make sure the DVD player is in pro­gressive-scan mode. You will not get a viewable picture through the HD INPUT-AV 4 jacks if the DVD player is in interlaced mode.
For more information on placing your DVD player in progressive-scan mode, see the DVD player’s directions-for-use manual. Also, see the Helpful Hints to the right. The way in which progres­sive-scan mode is selected varies among DVD players.
4
Press the AV button on your TV remote control as many times as necessary to
select the
AV4 signal source.
5
Turn the DVD on, insert a disc, and press play to view a DVD on the TV.
If you experience difficulties receiving sound with a DVD disc, check the sound settings through the DVD disc’s menu.
HELPFUL HINT
To prevent uneven picture-tube aging, do not leave nonmoving images or picture borders on the screen for an extended period. See page 60.
W
ARNING
12
CONNECTING A DVD P
LAYER WITH PROGRESSIVE-SCAN CAPABILITY
Connecting Accessory Devices to Your TV
BEGIN
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
ITR/
RECORD
HOME VIDEO
HOME
MOVIES
PERSONAL
SLEEP
REC
PIPPOSITION
VCR
ACC
MENU/ SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
4
AV4
• If after connecting your DVD player your display is filled with wavy lines, it may be that your DVD player is not set to progres­sive-scan mode. Some DVD players have an I/P (interlaced/progressive scan) switch located on the back or front of the players for changing from interlaced to progressive-scan mode. Other DVD players may allow the mode to be changed by pressing a button on the DVD player’s remote control or by using the DVD player’s onscreen menu. If the
interlaced/progressive-scan selection option is provided only through the DVD onscreen menu, you will need to connect the DVD player to another AV input source in addition to HD INPUT-AV 4 to see the DVD menu. Select this additional AV source on screen to see the DVD menu and choose progressive-scan mode. You will then be able to see the DVD picture through the AV4 source.
• Some DVD players have dedicated progres­sive-scan output jacks that are labeled as such and require no switching to provide a picture through the HD INPUT-AV 4 jacks. See your DVD player’s directions-for-use manual for information.
• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr. RGB is also an option. If the picture’s color looks grossly incorrect, try changing either the DVD player’s or TV’s color-space setting. See the DVD player’s directions-for-use manual for information on setting its color space. Or see page 59 in this manual to set the TV’s color space.
• The Picture-in-Picture (PIP) feature does not function with AV4 or AV5.
HELPFUL HINTS
ANTENNA IN 75
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
SYNC
H
AUDIO
1
2
L
L
AUDIO
R
R
AC IN ~
INPUT-AV 1
VIDEO
S-VIDEO
L
AUDIO
R
VIDEO OUT
3
Rear of DVD Player with Progressive Scan Capability
Y
VIDEO
B
P
PR
SELECT
I
S
P
Rear of TV
OUTPUT
Y
Pb
Pr
AUDIO
VIDEO
L
R
2CH
INPUT-AV 2
S-VIDEO
AUDIO OUT
L
R
BITSTREAM
/PCM
OPTICAL
COAXIAL
DIGITAL
13
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
ITR/
RECORD
HOME VIDEO
HOME
MOVIES
PERSONAL
SLEEP
REC
VCR
ACC
MENU/ SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
3
AV2
T
he S(uper)-Video connection on the rear (and
side panel) of the TV can give you better pic­ture detail and clarity for the playback of S-VHS VCR tapes or DVDs than the normal antenna (RF signal) or Video (composite) picture connec­tions. The example given connects a DVD/VCR Combi unit to the INPUT-AV 2 jacks on the rear of the TV.
NOTE: The accessory device must have an S-VIDEO output jack to make the connection explained on this page.
To make the connections, you will need:
• one S-Video cable
• two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect the S-VIDEO OUT jack on the rear of the accessory device with S-VIDEO output to the INPUT-AV 2 S-VIDEO jack on the rear of the TV.
2
Connect the DVD/VCR AUDIO OUT jacks on the rear of the accessory device
to the INPUT-AV 2 AUDIO input jacks on the rear of the TV.
3
Press the AV button on the remote con­trol as many times as necessary to select
the AV2 source on the TV.
4
Turn the accessory device on and press play to view the video source material (DVD or videotape, for example) on the TV.
Connecting Accessory Devices to Your TV
CONNECTING AN S-V
IDEO DEVICE
BEGIN
• To simplify making connections, audio cables are often color coded: red for the right channel, and white for the left chan­nel. The jacks on your TV are likewise color coded to match the connectors. To make S-Video connections, you must use an S-Video cable.
• You can also connect a satellite receiver, laser-disc player, video-game player, or other accessory device with S-Video capability to the TV in a manner similar to example shown on this page.
• If you connect a satellite receiver to the TV, you will need to use the receiver’s channel-memorization system to store channels in the receiver’s memory.
HELPFUL HINTS
Video sources that show a constant nonmov­ing pattern on the TV screen can cause pic­ture-tube damage. When you are not using your video accessory devices, turn them off. Also, regularly alternate the use of accessory video sources with normal TV viewing. See page 60.
WARNING
ANTENNA IN 75
Rear of TV
INPUT-AV 1
OUTPUT
AUDIO
Y
Pb
L
Pr
R
VIDEO
S-VIDEO
Rear of Device with S-VIDEO Output*
DVD/VCR
OUT
CH3 CH4
L AUDIO R
VIDEO
IN
DVD/VCR
AUDIO OUT
L
R
ANT-IN
ANT-OUT
*(Example: Philips DVD/VCR Combi model DV910VHS)
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
1
SYNC
R/Pr
B/Pb
V
AUDIO
H
L
R
DIGITALAUDIO OUT PCM / BITSTREAM
S-VIDEO
OUT
AUDIO
OPTICAL
L
R
COMPONENT
VIDEO OUT
Y
COAXIAL
Cr
Cb
2
INPUT-AV 2
VIDEO
S-VIDEO
L
AUDIO
R
CONNECTING AN HD R
ECEIVER TO THE HD INPUT-AV 4 JACKS
Connecting Accessory Devices to Your TV
• Making a standard connection along with the HD connection as shown in the example (S-VIDEO) on this page will allow you to see the receiv­er’s onscreen menu and a picture (valid signal) from the receiver should it be switched to SD mode.
• The HD INPUT-AV 4 jacks are for standard RCAconnectors. Your HD receiver may use RCA or BNC output jacks. If your HD receiver comes with BNC jacks, you will need to purchase BNC-to-RCA adapters to connect the receiver to the TV. You should be able to purchase these adapters at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
• The HD INPUT-AV 4 jacks are compatible with some digital equipment having RGB outputs with “sync on green” or RGB with “separate H and V sync.” Output standards for digital equipment, however, may vary by manu­facturer. No industry standards have been established for HD television RGB signal systems, timing, synchronization, and signal strengths. If the digital equipment you want to connect to your TV offers both component video and RGB outputs, component video is the suggested connection to use.
• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr. RGB is also an option. If the picture color looks grossly incorrect, try changing either the receiver’s or TV’s color space. See the receiver’s directions-for-use manual for information on setting its color space. Or see page 59 in this manual for setting the TV’s AV4 color space.
• AV4 and AV5 do not function with the PIP feature. They cannot be dis­played in the PIP window, nor can the PIP window be displayed when those signal sources are being viewed on the main screen.
HELPFUL HINTS
BNC-to-
RCA
Adapter
BNC
Connector
Adapter
Fitted to
Connection
OR
RCA
Connector
D
igital equipment with a 1080i or 480p out­put, is compatible with the HD INPUT-AV 4
video jacks. NOTE: This television is designed to be compati-
ble with high-definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Because output standards may vary by manufacturer, you may encounter some digital equipment that will not properly display pictures on the TV.
To make the connections shown in this example, you will need:
• one S-VIDEO cable
• three cables for video connections (standard RCA connectors)
• four cables for audio connections (standard RCA connectors)
• one coaxial cable (75Ω).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect S-VIDEO and audio cables. NOTE: This example uses
INPUT-AV 1. You can use INPUT-AV 2 or the side input jacks if you want.
• Connect an S-VIDEO cable from the HD receiver’s S-VIDEO jack to the TV’s INPUT-AV 1 S-VIDEO jack.
• Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s INPUT-AV 1 L(eft) and R(ight) AUDIO jacks.
2
Connect component video and audio cables to the TV’s HD inputs.
• Connect from the YPRPB jacks on the HD receiver to the TV’s HD INPUT-AV 4 G/Y, R/Pr, B/Pb jacks.
• Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s HD INPUT-AV 4 L(eft) and R(ight) AUDIO jacks.
3
Connect coaxial cables.
• Connect the coaxial cable lead-in from your cable outlet, cable converter box, or VHF/UHF antenna to the IN FROM ANT jack on the HD receiver.
• Connect a coaxial cable from the OUT TO TV jack to the ANTENNA IN 75 jack on the TV.
• Connect the coaxial cable lead-in from a satellite dish antenna to the SATELLITE IN jack on the HD receiver.
4
Refer to the directions-for-use manual that came with the HD receiver for setup instructions.
BEGIN
14
ANTENNA IN 75
3
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
SYNC
H
3
2
2
L
L
AUDIO
AUDIO
R
R
3
1
Rear of HD Receiver (Example: Philips DSHD800)
Rear of TV
INPUT-AV 1
Y
VIDEO
S-VIDEO
AUDIO
Y
L
PB
RF
PR
REMOTEPHONE JACK
AUDIO
VIDEOVIDEO
Pb
L
AUDIO
Pr
R
L
VCR
CONTROL
RR
S-VIDEO
INPUT-AV 2
OUTPUT
VIDEO
1
S-VIDEO
L
AUDIO
R
DIGITAL
AUDIO OUT
Coaxial Cable Lead-in
from Cable Outlet,
Cable Converter Box,
or VHF/UHF Antenna
OUT TO TV
CH 3 CH 4
IN FROM ANT SATELLITEIN
Coaxial Cable
Lead-in
from
Satellite
Dish Antenna
D
igital equipment with a 1080i or 480p output
, is compatible with the HD INPUT­AV 5 video input jack. This page presents one possible connection scenario. See the HD receiver’s directions-for-use manual for more information.
To make the connections shown in this example, you will need:
• one DB15 cable
• an S-VIDEO cable
• four cables for audio connections (standard
RCA connectors)
• one coaxial cable (75Ω). NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect S-VIDEO and audio cables. NOTE: This example uses
INPUT-AV 1. You can use INPUT-AV 2 or the side input jacks if you would like.
• Connect an S-VIDEO cable from the HD receiver’s S-VIDEO jack to the TV’s INPUT-AV 1 S-VIDEO jack.
• Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s INPUT-AV 1 L(eft) and R(ight) AUDIO jacks.
2
Connect the DB15 video cable and audio cables to the TV’s HD inputs.
• Connect from the DB15 jack on the receiver to the TV’s HD INPUT-AV 5 DB15 jack.
• Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s HD INPUT-AV 5 L(eft) and R(ight) AUDIO jacks.
3
Connect coaxial cables.
• Connect the coaxial cable lead-in from your cable outlet, cable converter box, or VHF/UHF antenna to the receiver’s ANTENNAAIN jack. If desired, con­nect the coaxial cable lead-in from anoth­er RF signal source to the receiver’s ANTENNA B IN jack.
• Connect a coaxial cable from the OUT TO TV jack to the ANTENNA IN 75 jack on the TV.
• Connect the coaxial cable lead-in from a satellite dish antenna to the SATELLITE IN jack on the receiver.
4
Refer to the directions-for-use manual that came with the HD receiver for setup instructions.
15
CONNECTING AN
HD RECEIVER TO THE HD INPUT-AV 5 JACKS
Connecting Accessory Devices to Your TV
• This television is designed to accept high-definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Because output standards may vary by manufactuer, you may encounter some digital equipment that will not properly dis­play pictures on the TV.
• Making a standard connection along with the HD connection as shown in the example (S-VIDEO) on this page will allow you to see the receiv­er’s onscreen menu and a picture (valid signal) from the receiver should it be switched to standard-definition mode.
• You can also connect a 1080i or 480p video source that has component video, RGB, or RGB+H/V output jacks rather than a DB15 output jack to the TV’s HD INPUT-AV5. This type of hookup will require a special­ty cable that has a DB15 connector on one end and standard (phono­type) RCA connectors on the other. See page 57 for more information on HD INPUT-AV5 input compatibility. After making the connections, also ensure that the TV’s color-space setting matches the output of your video source, either RGB or YPbPr (see page 59).
• The default color-space setting for the HD INPUT-AV 5 jack is RGB. YPbPr is also an option. If the picture color looks grossly incorrect, try changing either the receiver’s or TV’s color space. See the receiver’s directions-for-use manual for information on setting its color space. See page 59 in this manual for information on selecting a color-space setting for the AV5 input.
• AV4 and AV5 do not function with the PIP feature. They cannot be dis­played in the PIP window, nor can the PIP window be displayed when those signal sources are being viewed on the main screen.
HELPFUL HINTS
BEGIN
Rear of HD Receiver
Coaxial Cable
Lead-in from Satellite Dish
ANTENNA IN 75
SATELLITE
IN
S-VIDEO
ACCESS CARD
3
Rear of TV
INPUT-AV 1
OUTPUT
Y
1
VIDEO
AUDIO
Pb
L
Pr
R
1
DIGITAL AUDIO
OUTPUT
INPUT-AV 2
VIDEO
S-VIDEO
L
AUDIO
R
R
R
VCR
CONTROL
PHONE JACK
Coaxial Cable Lead-in
from Alternate RF
Signal Source
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
2
B/Pb
V
L
SYNC
AUDIO
H
R
L
L
VIDEOAUDIO
OUT TO TV
2
L
AUDIO
R
S-VIDEO
ANTENNA BINANTENNA A
33
3
IN
Coaxial Cable
Lead-in from Cable Outlet,
Converter Box,
or VHF/UHF Antenna
16
CONNECTING A C
AMCORDER
T
he side panel jacks provide a convenient way
for you to connect a camcorder to your TV. The side panel jacks are recognized by your TV as AV3.
You can obtain S-VIDEO quality with an S-VHS, Hi-8, or digital camcorder by connecting to the S-VIDEO input instead of the VIDEO (composite) input.
To make the connections shown in this example, you will need:
• an S-VIDEO cable
• two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect from the S-VIDEO output on the camcorder to the S-VIDEO input in the TV’s side panel.
2
Connect from the AUDIO outputs on the camcorder to the side panel AUDIO
L(eft) and R(ight) inputs.
3
Press the AV button on the remote con­trol as many times as necessary to select the AV3 source on the TV.
4
Turn the camcorder on, insert a video­tape and press PLAY to view the tape on the TV.
Connecting Accessory Devices to Your TV
BEGIN
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
ITR/
RECORD
HOME VIDEO
HOME
MOVIES
PERSONAL
SLEEP
REC
PIPPOSITION
VCR
ACC
MENU/
SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
3
AV3
To simplify making connections, the con­nectors on audio cables are often color coded: red for the right channel, and white for the left channel. The jacks on your TV are likewise color coded to match the con­nectors. To make S-Video connections, you must use an S-Video cable.
HELPFUL HINT
Typical
Camcorder
 
S-VIDEO
DV
1
VIDEO AUDIO
Side Jack Panel
LEFT RIGHT
S-VIDEO
VIDEO
L
AUDIO
R
G
2
17
CONNECTING AND U
SING HEADPHONES WITH YOUR TV
T
he HEADPHONE controls allow you to adjust the volume and balance of the
sound going to the headphones.
1
Press the MENU/SELECT button
on the remote control to show the onscreen menu.
2
Press the CURSOR RING DOWN
once to highlight SOUND.
3
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
4
Press the CURSOR RING DOWN
repeatedly until HEADPHONE is highlighted. Then press the CURSOR RING RIGHT to enter the HEADPHONE submenu.
5
Press the CURSOR RING DOWN or UPto highlight VOLUME or
BALANCE. Then press the CURSOR RING LEFT or RIGHT to adjust the control.
6
Press the STATUS/EXIT button to exit the menu.
T
he TV’s side panel has a headphone jack for
personal listening.
1
Insert the headphone plug into the head­phone jack ; in the TV’s side panel.
2
Turn down the TV’s volume or press the Mute button
cc
on the remote con-
trol to turn off the TV’s internal speakers.
See the section below for information on adjusting headphone volume and balance.
NOTE: The headphone impedance must be between 8 and 4,000 ohms. The head­phone jack is stereo and 3.5 mm in size.
Connecting Accessory Devices to Your TV
The AVL, INCR. SURROUND, and BASS BOOST controls do not function with the headphones.
HELPFUL HINT
BEGIN
BEGIN
Side Jack Panel
G
1
PICTURE
MENU/ SELECT
2
MUTE
CH
SOUND
TREBLE 30
BASS BALANCE AVL INCR . SURROUND
PICTURE
SOUND
FEATURES INSTALL
2
TREBLE BASS BALANCE AVL INCR . SURROUND
STATUS/
EXIT
VOL
SOUND
6
2,4,
5
TV
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
POWER
ACC
VCR
ACTIVE
FREEZE
CONTROL
DN
UP
PICTURE
MENU/
SELECT
MUTE
213 546 879
SURF
0
POSITION
PIP
CH
3
1
SOUND
TREBLE BASS BALANCE INCR . SURROUND
HEADPHONE
SOUND
HEADPHONE
VOLUME 30
BALANCE
SOUND
HEADPHONE
VOLUME
BALANCE 0
VOLUME BALANCE
18
PROGRAMMING THE
TV REMOTE TO WORK ACCESSORY DEVICES
Y
our TV remote is capable of working not
only your TV but also other infrared remote (IR) controlled devices such as VCRs, cable TV converter boxes, satellite receivers, DVD players, and laser-disc players.
If you want to use your TV remote to oper­ate a VCR or other accessory device, you will need to perform this initial check explained in this section. You may also need to go to the sections on the “Code-entry Method” and the “Search Method” in the pages that follow.
1
Press the VCR orACC(essory) mode button on the TV remote for
the desired accessory device category. NOTE: Pressing the VCR mode button
allows access to product codes for VCRs. Pressing the ACC(essory) mode button allows access to the product codes for cable TV converters, satellite receivers, DVD players, and laser-disc players.
2
Point the TV remote toward the desired accessory device and press the POWER button.
Does the remote turn the accessory device on?
If yes, and try other function but-
tons on the TV remote. With a VCR, for example, try the Play, Stop, and Rewind buttons, for example. (See page 23 for information on how the remote buttons correspond with acces­sory device functions.) If they also work the accessory device, then the remote is ready and no further steps are needed.
If not, do the following: Look up a four-digit remote code
number on pages 21 or 22 for your
brand of accessory device. Then go through the simple steps for entering a four-digit code as explained on page 19.
BEGIN
Using the Remote Control
If more than one four-digit code number is listed, you may have to try more than the first number given to locate your device’s correct code.
HELPFUL HINT
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
Satellite Receiver
Cable Converter Box
DVD Player
VCR
1
TV
VCR
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
ACTIVE
CONTROL
DN
UP
MUTE
213 546 879 0
POWER
ACC
SURF
FREEZE
PICTURE
MENU/
SELECT
2
1
CH
POSITION
PIP
19
USING THE CODE-ENTRY METHOD TO PROGRAM YOUR TV REMOTE
N
ow that you have looked up the four-
digit remote-control Direct-entry Code for your brand of accessory device, you are ready to follow the simple steps shown below to program your TV remote.
Please read through all the steps before beginning.
1
First, press and hold down the VCR or ACC (for an accessory device other than a VCR) mode button on
the TV remote. Then press and hold down the MENU/SELECT button at the same time for a brief moment. Release the buttons. The TV remote back light will switch on. NOTE: For correct operation, you must first press and hold the mode button and then press and hold the MENU/SELECT button simultaneously.
2
Within 30 seconds of pressing the VCR (or ACC) button and MENU/SELECT button, enter a four-digit code for the accessory device (see pages 21 and 22).
If you make a mistake while attempt­ing to enter the four-digit code and want to start again, press any button other than one with a number. Then return to step 1 to begin again.
3
Point the remote at the accessory device. Then press the POWER button
on the remote to turn the device on.
BEGIN
Using the Remote Control
• If you do not enter a complete code within 30 seconds, you will need to perform step 1 of the Code-entry Method again.
• If you enter more than four digits, the unit will retain the first four digits entered.
• If the procedure explained above does not
work the first time, repeat the steps using the same remote code number.
• If after a second try the remote does not
operate your accessory device, and more code numbers are listed for your brand, use the next listed code number.
• If after repeated attempts the Entry-code
Method does not allow you to work your accessory device with your TV remote, try the Search Method explained on the next page.
HELPFUL HINTS
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
Satellite Receiver
Cable Converter Box
DVD Player
VCR
1
TV
VCR
SWAP PIP CH
SOUND
STATUS/
EXIT
ACTIVE
CONTROL
DN
UP
POWER
ACC
FREEZE
PICTURE
SELECT
3
1
MENU/
2
VOL
MUTE
213 546 879
TV/VCR
A/CH
0
POSITION
CH
SURF
PIP
20
USING THE S
EARCH METHOD TO PROGRAM YOUR TV REMOTE
Y
our TV remote can be set to work various
accessory devices (VCRs, cable convert­ers, and satellite receivers, for example) by what is called the Search Method.
NOTE: The Search Method works only with devices equipped with channel-display indi­cators on the devices themselves or the abili­ty to show channel numbers on the TV screen. If the Code-entry Method (shown in the previous section) did not enable your TV remote to work your accessory device, then follow the easy steps listed below. Please read the steps once before performing them.
1
Turn on the desired device. Press and hold down the VCR orACC (for an accessory device other than a VCR) mode button on the TV
remote. Then press and hold down the SURF button as you hold down the desired mode (VCR or ACC) button.
NOTE: For correct operation, you must press and hold down the desired mode (VCR or ACC) button first and then press and hold down the SURF button second.
While holding down the SURF and the desired mode (VCR orACC) buttons simultaneously, point the remote toward the accessory device
and continue holding the buttons down.
2
Watch the Channel Indicator on your accessory device. Channel num-
bers will scan up when the TV remote has identified the correct code for your accessory device. This may take several minutes.
3
Release the mode (VCR or ACC) and SURF buttons as soon as chan­nel numbers start to scan up. The
scanning means that your TV remote has found the code for your accessory device.
NOTE:
If no channel change happens
after several minutes, repeat steps 1 and
2. Then if a channel change still does not occur, the remote will not work with the desired accessory device.
BEGIN
Using the Remote Control
• The remote’s back light will blink as the remote moves through its product code list. After the remote identifies the product code for your accessory device and you release the remote buttons, the back light will blink twice.
• Your TV remote may locate the accessory device’s code quickly or within several minutes.
• Don’t let the accessory device scan up more than five channels when the correct code is found— the remote may pass up the right code and have to repeat the search cycle.
HELPFUL HINTS
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
Satellite Receiver
Cable Converter Box
06
07
08
1,3
TV
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
06
09
VCR
06
POWER
ACC
VCR
ACTIVE
FREEZE
CONTROL
DN
UP
PICTURE
MENU/ SELECT
MUTE
213 546 879
SURF
0
POSITION
PIP
07
07
CH
08
09
08
09
1,3
1,3
21
DIRECT-ENTRY
CODES FOR A/V ACCESSORY DEVICES
S
EE THE NEXT PAGE FOR MORE CODES.
Using the Remote Control
VCR
CODE NUMBER
DENON . . . . . . . . . . . . . . . .0859
GE . . . . . . . . . . . . . . . . . . .0862
H
ARMAN/KARDON . . . . . . . .0871
H
ITACHI . . . . . . . . . . . . . . . .0870
JVC . . . . . . . . . . . . . . . . . .0868
KENWOOD . . . . . . . . . . . . .0865
MAGNAVOX . . . . . . . . . . . . .0860
MARANTZ . . . . . . . . . . . . . .0866
MITSUBISHI . . . . . . . . . . . . . .0861
ONKYO . . . . . . . . . . . . . . . .0860
O
PTIMUS . . . . . . . . . . . . . . .0869
P
ANASONIC . . . . . . . . . . . . .0859
PHILIPS . . . . . . . . . . . . . . . . .0866, 0860
PIONEER . . . . . . . . . . . . . . .0869, 0863
PROSCAN . . . . . . . . . . . . . . .0862
RCA . . . . . . . . . . . . . . . . . .0862, 0869
SAMSUNG . . . . . . . . . . . . . . .0870
SONY . . . . . . . . . . . . . . . . .0864
T
ECHNICS . . . . . . . . . . . . . .0859
T
HETA DIGITAL . . . . . . . . . . .0869
TOSHIBA . . . . . . . . . . . . . . .0860
YAMAHA . . . . . . . . . . . . . . .0859, 0867
ZENITH . . . . . . . . . . . . . . . .0872, 0860
DVD PLAYER
CODE NUMBER
ADMIRAL . . . . . . . . . . . . . . .0075, 0236
ADVENTURA . . . . . . . . . . . . .0027
AIKO . . . . . . . . . . . . . . . . . .0305
AIWA . . . . . . . . . . . . . . . . .0334, 0495, 0027, 0064
AKAI . . . . . . . . . . . . . . . . . .0133, 0080, 0068, 0076,
. . . . . . . . . . . . . . . . . . . . .0088, 0183, 0269
AMERICA A
CTION . . . . . . . . .0305
A
MERICAN HIGH . . . . . . . . . .0062
ASHA . . . . . . . . . . . . . . . . .0267
AUDIOVOX
. . . . . . . . . . . . . .0064
B
EAUMARK . . . . . . . . . . . . . .0267
BELL & HOWELL . . . . . . . . . .0131
BROKSONIC . . . . . . . . . . . . .0148, 0211, 0029, 0236,
. . . . . . . . . . . . . . . . . . . . .0238, 0322, 0388, 0506
CCE . . . . . . . . . . . . . . . . . .0099, 0305
CALIX . . . . . . . . . . . . . . . . .0064
CANON . . . . . . . . . . . . . . . .0194, 0062, 0129
CAPEHART . . . . . . . . . . . . . .0047
CARVER . . . . . . . . . . . . . . . .0108
CINERAL . . . . . . . . . . . . . . .0305
CITIZEN . . . . . . . . . . . . . . . .0305, 0064
COLT . . . . . . . . . . . . . . . . .0099
CRAIG . . . . . . . . . . . . . . . . .0064, 0099, 0074, 0267,
. . . . . . . . . . . . . . . . . . . . .0298
CURTIS MATHES . . . . . . . . . .0062, 0068, 0087, 0189
CYBERNEX . . . . . . . . . . . . . .0078, 0267
DAEWOO . . . . . . . . . . . . . . .0305, 0588, 0047, 0072
DAYTRON . . . . . . . . . . . . . .0047
DENON . . . . . . . . . . . . . . . .0069
DYNATECH . . . . . . . . . . . . . .0027
ELECTROHOME . . . . . . . . . . .0064
ELECTROPHONIC . . . . . . . . . .0064
EMEREX . . . . . . . . . . . . . . . .0059
EMERSON . . . . . . . . . . . . . . .0211, 0029, 0236, 0305,
. . . . . . . . . . . . . . . . . . . . .0063, 0148, 0238, 0588,
. . . . . . . . . . . . . . . . . . . . .0235, 0321, 0506, 0088,
. . . . . . . . . . . . . . . . . . . . .0115, 0239, 0027, 0064,
. . . . . . . . . . . . . . . . . . . . .0070, 0095, 0322, 0388,
. . . . . . . . . . . . . . . . . . . . .0537
FISHER . . . . . . . . . . . . . . . . .0074, 0131, 0081, 0093
FUJI . . . . . . . . . . . . . . . . . . .0060, 0062
FUNAI . . . . . . . . . . . . . . . . .0027
GE . . . . . . . . . . . . . . . . . . .0062, 0087, 0075, 0092,
. . . . . . . . . . . . . . . . . . . . .0229, 0267
GARRARD . . . . . . . . . . . . . .0027
GO VIDEO . . . . . . . . . . . . . .0306, 0459, 0553, 0259
GOLDSTAR . . . . . . . . . . . . . .0064, 0045, 0065, 0498,
. . . . . . . . . . . . . . . . . . . . .0507
GRADIENTE . . . . . . . . . . . . .0035, 0027, 0435
GRUNDIG . . . . . . . . . . . . . . .0222
HI-Q . . . . . . . . . . . . . . . . .0074
H
ARLEY DAVIDSON . . . . . . . .0027
H
ARMAN/KARDON . . . . . . . .0065, 0102, 0108
H
ARWOOD . . . . . . . . . . . . .0095, 0099
HEADQUARTER . . . . . . . . . . .0073
H
ITACHI . . . . . . . . . . . . . . . .0069, 0193, 0132, 0092,
. . . . . . . . . . . . . . . . . . . . .0027, 0068, 0109
H
UGHES NETWORK SYSTEMS .0069
JVC . . . . . . . . . . . . . . . . . .0094, 0035, 0233, 0234,
. . . . . . . . . . . . . . . . . . . . .0068, 0411
JENSEN . . . . . . . . . . . . . . . . .0068
KEC . . . . . . . . . . . . . . . . . .0064, 0305
KLH . . . . . . . . . . . . . . . . . .0099
KENWOOD . . . . . . . . . . . . .0068, 0094, 0411, 0065
KODAK . . . . . . . . . . . . . . . .0062, 0064
LXI . . . . . . . . . . . . . . . . . . .0064
LLOYD'S . . . . . . . . . . . . . . . .0027, 0235
LOGIK . . . . . . . . . . . . . . . . .0099
MEI . . . . . . . . . . . . . . . . . .0062
MGA . . . . . . . . . . . . . . . . .0070, 0088, 0267
MGN TECHNOLOGY . . . . . . .0267
MTC . . . . . . . . . . . . . . . . .0027, 0267
MAGNASONIC . . . . . . . . . . . .0305
MAGNAVOX
. . . . . . . . . . . . .0062, 0108, 0137, 0130,
. . . . . . . . . . . . . . . . . . . . .0027, 0066, 0176
M
AGNIN . . . . . . . . . . . . . . .0267
MARANTZ . . . . . . . . . . . . . .0108, 0062
MARTA . . . . . . . . . . . . . . . . .0064
MATSUSHITA . . . . . . . . . . . . .0062, 0189, 0481
MEMOREX . . . . . . . . . . . . . .0131, 0074, 0506, 0027,
. . . . . . . . . . . . . . . . . . . . .0064, 0075, 0062, 0073,
. . . . . . . . . . . . . . . . . . . . .0267, 0334, 0066, 0189,
. . . . . . . . . . . . . . . . . . . . .0236, 0481, 0828, 0829
MINOLTA
. . . . . . . . . . . . . . .0132, 0069
M
ITSUBISHI . . . . . . . . . . . . . .0200, 0088, 0102, 0241,
. . . . . . . . . . . . . . . . . . . . .0269, 0070, 0075, 0094,
. . . . . . . . . . . . . . . . . . . . .0470
MOTORO LA . . . . . . . . . . . . .0062, 0075
MULTITECH . . . . . . . . . . . . .0027, 0099
NAD . . . . . . . . . . . . . . . . .0085
NEC . . . . . . . . . . . . . . . . . .0065, 0067, 0068, 0077,
. . . . . . . . . . . . . . . . . . . . .0094, 0109, 0131
NIKKO . . . . . . . . . . . . . . . . .0064
NIKON . . . . . . . . . . . . . . . .0061, 0280
NOBLEX . . . . . . . . . . . . . . .0267
OLYMPUS . . . . . . . . . . . . . . .0062, 0253
OPTIMUS . . . . . . . . . . . . . . .0189, 0481, 0827, 0828,
. . . . . . . . . . . . . . . . . . . . .0075, 0085, 0829, 0064,
. . . . . . . . . . . . . . . . . . . . .0131, 0459
OPTONICA . . . . . . . . . . . . . .0089
ORION . . . . . . . . . . . . . . . .0506, 0029, 0211, 0236,
. . . . . . . . . . . . . . . . . . . . .0322
PANASONIC . . . . . . . . . . . . .0062, 0189, 0828, 0481,
. . . . . . . . . . . . . . . . . . . . .0253, 0104, 0405, 0829,
. . . . . . . . . . . . . . . . . . . . .0129, 0252, 0254, 0273,
. . . . . . . . . . . . . . . . . . . . .0827
PENNEY . . . . . . . . . . . . . . . .0062, 0267, 0064, 0069,
. . . . . . . . . . . . . . . . . . . . .0065, 0067, 0081
PENTAX . . . . . . . . . . . . . . . .0069, 0092, 0132
PHILCO . . . . . . . . . . . . . . . .0062, 0236, 0506
PHILIPS . . . . . . . . . . . . . . . . .0108, 0062, 0089, 0137,
. . . . . . . . . . . . . . . . . . . . .0830, 0831
P
ILOT . . . . . . . . . . . . . . . . .0064
P
IONEER . . . . . . . . . . . . . . .0085, 0195, 0094
P
OLK AUDIO . . . . . . . . . . . .0108
PORTLAND . . . . . . . . . . . . . .0047
P
ROFITRONIC . . . . . . . . . . . .0267
P
ROSCAN . . . . . . . . . . . . . . .0087, 0229
PROTEC . . . . . . . . . . . . . . . .0099
P
ULSAR . . . . . . . . . . . . . . . .0066, 0078
Q
UARTER . . . . . . . . . . . . . . .0073
QUARTZ . . . . . . . . . . . . . . .0073
QUASAR . . . . . . . . . . . . . . .0062, 0189, 0104, 0481,
. . . . . . . . . . . . . . . . . . . . .0828
RCA . . . . . . . . . . . . . . . . . .0087, 0176, 0229, 0069,
. . . . . . . . . . . . . . . . . . . . .0132, 0085, 0062, 0075,
. . . . . . . . . . . . . . . . . . . . .0092, 0104, 0133, 0267,
. . . . . . . . . . . . . . . . . . . . .0304
RADIO SHACK
. . . . . . . . . . .0027
R
ADIX . . . . . . . . . . . . . . . . .0064
RANDEX . . . . . . . . . . . . . . .0064
REALISTIC . . . . . . . . . . . . . . .0027, 0131, 0074, 0075,
. . . . . . . . . . . . . . . . . . . . .0064, 0062, 0089, 0073,
. . . . . . . . . . . . . . . . . . . . .0093
RICOH . . . . . . . . . . . . . . . . .0061, 0280
RUNCO . . . . . . . . . . . . . . . .0066
STS . . . . . . . . . . . . . . . . . .0069
SALORA . . . . . . . . . . . . . . . .0102
SAMSUNG . . . . . . . . . . . . . . .0072, 0078, 0080, 0267
SANKY . . . . . . . . . . . . . . . . .0066, 0075
SANSUI . . . . . . . . . . . . . . . .0068, 0506, 0027, 0094,
. . . . . . . . . . . . . . . . . . . . .0109, 0236, 0298
SANYO . . . . . . . . . . . . . . . . .0074, 0073, 0131, 0267
SCOTT . . . . . . . . . . . . . . . . .0211, 0238, 0148, 0070,
. . . . . . . . . . . . . . . . . . . . .0072, 0237, 0239
SEARS . . . . . . . . . . . . . . . . .0081, 0132, 0064, 0069,
. . . . . . . . . . . . . . . . . . . . .0027, 0062, 0073, 0074,
. . . . . . . . . . . . . . . . . . . . .0093, 0131
SEMP . . . . . . . . . . . . . . . . . .0072
SHARP . . . . . . . . . . . . . . . . .0075, 0089
SHINTOM . . . . . . . . . . . . . . .0099
SHOGUN . . . . . . . . . . . . . . .0078, 0267
SINGER . . . . . . . . . . . . . . . .0099
SONY . . . . . . . . . . . . . . . . .0060, 0061, 0059, 0280,
. . . . . . . . . . . . . . . . . . . . .0027, 0038, 0062
SUNPAK . . . . . . . . . . . . . . . .0280
SYLVANIA . . . . . . . . . . . . . . .0062, 0108, 0027, 0070,
. . . . . . . . . . . . . . . . . . . . .0130, 0137
SYMPHONIC . . . . . . . . . . . . .0027
TMK . . . . . . . . . . . . . . . . .0063, 0235, 0267
TATUNG . . . . . . . . . . . . . . . .0068
TEAC . . . . . . . . . . . . . . . . . .0027, 0068
TECHNICS . . . . . . . . . . . . . .0062, 0189, 0273
TEKNIKA . . . . . . . . . . . . . . .0027, 0062, 0064, 0079
THOMAS . . . . . . . . . . . . . . .0027
TOSHIBA . . . . . . . . . . . . . . .0072, 0237, 0239, 0070,
. . . . . . . . . . . . . . . . . . . . .0093, 0393
TOTEVISION . . . . . . . . . . . . .0064, 0267
UNITECH . . . . . . . . . . . . . . .0267
VECTOR . . . . . . . . . . . . . . . .0072
VECTOR RESEARCH . . . . . . . .0065, 0067
VIDEO CONCEPTS . . . . . . . . .0067, 0072, 0088, 0248
VIDEOSONIC . . . . . . . . . . . . .0267
W
ARDS . . . . . . . . . . . . . . . .0062, 0087, 0089, 0027,
. . . . . . . . . . . . . . . . . . . . .0074, 0239, 0267, 0069,
. . . . . . . . . . . . . . . . . . . . .0075, 0099, 0108, 0176
W
HITE WESTINGHOUSE . . . . .0099, 0305, 0236
XR-1000 . . . . . . . . . . . . . .0099, 0027, 0062
YAMAHA . . . . . . . . . . . . . . .0065
ZENITH . . . . . . . . . . . . . . . .0066, 0027, 0060, 0061,
. . . . . . . . . . . . . . . . . . . . .0236, 0506
TV
VCR
ACTIVE
SWAP PIP CH
CONTROL
DN
UP
SOUND
POWER
ACC
FREEZE
PICTURE
Loading...
+ 47 hidden pages