Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources
Supplier's name or trade mark: PHILIPS
Supplier's address: Customer Care Philips, I.B.R.S./C.C.R.I. /Numéro 10461, 5600VB Eindhoven, NL
Model identifier: 9290020657
Type of light source:
Lighting technology used: LED Non-directional or
directional:
Light source cap-type
(or other electric interface)
Mains or non-mains: MLS Connected light
Colour-tuneable light source: No Envelope: High luminance light source: No
Anti-glare shield: No Dimmable: Only with
Parameter Value Parameter Value
Energy consumption in onmode (kWh/1000 h), rounded
up to the nearest integer
Useful luminous flux (ɸuse),
indicating if it refers to the flux
in a sphere (360º), in a wide
cone (120º) or in a narrow cone
(90º)
On-mode power (Pon),
expressed in W
Networked standby power (P
for CLS, expressed in W and
rounded to the second decimal
Height 54Outer
dimensions
Width 50
net
)
GU10
source (CLS):
Product parameters
General product parameters:
4 Energy efficiency
class
345 in Narrow
cone (90°)
3,8 Standby power (Psb),
- Colour rendering
Correlated colour
temperature,
rounded to the
nearest 100 K,
or the range of
correlated colour
temperatures,
rounded to the
nearest 100 K, that
can be set
expressed in W
and rounded to the
second decimal
index, rounded to
the nearest integer,
or the range of CRIvalues that can be
set
Spectral power
distribution in the
specific dimmers
DLS
No
F
2200...2700
0,00
90
See image
in last page
Page 1 / 3
without
separate
Depth 50
range 250 nm to 800
nm, at full-load
control gear,
lighting
control parts
and nonlighting
control parts,
if any
(millimetre)
Claim of equivalent power
(a)
Yes If yes, equivalent
50
power (W)
Chromaticity
0,458
coordinates (x and y)
Parameters for directional light sources:
Peak luminous intensity (cd) 700 Beam angle in
36
degrees, or the
range of beam
angles that can be
set
Parameters for LED and OLED light sources:
R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,93
Parameters for LED and OLED mains light sources:
displacement factor (cos φ1) 0,90 Colour consistency
6
in McAdam ellipses
Claims that an LED light
source replaces a fluorescent
light source without integrated
(b)
-
If yes then
replacement claim
(W)
ballast of a particular wattage.
Flicker metric (Pst LM) 1,0 Stroboscopic effect
0,4
metric (SVM)
(a)
'-' : not applicable;
(b)
'-' : not applicable;
Page 2 / 3
Page 3 / 3
Loading...