Philips 5FF2CMI/00 Firmware Upgrade Instruction

Software Release Note

The following notes provide the revision history and a list of known software issues for the current release.

Updated: January 31, 2008

TECH NOTES

Firmware update –

1.Extract the PHILIPS 5FF2M.zip to the root directory of an SD memory card,

2.Insert the SD memory card with the latest version firmware into your Photo Frame,

3.Push the Power button to power-on your Photo Frame,

4.The software update will start automatically.

During the update, DO NOT remove the memory card or make new connections,

5.When the upgrading has finished, the Photo Frame will show the main page,

6.Remove the SD memory card from SD Slot,

7.Restart the Photo Frame,

8.Now the upgrade has completed,

9.Check the firmware version on Setup Status Firmware.

Page 1 of 1