Philips 60PW9383, 55PW9383 User Manual

3135 035 21401
55PW9383 60PW9383
Product Highlights
• High-definition display—1080i/480p
• Philips HD Optics
• Auto IntelliSense
Focus
• HD DVI and Component Inputs
• Active Control
•Eye Fidelity—selectable progressive or interlaced scan
•APAC
(Automatic Phosphor Aging
Compensation)
Features
• Multipoint digital convergence
•Protective screen filter
• Virtual Dolby
®
Surround—30-watt RMS
• 3-D Y/C comb filter
• Double-window, two-tuner picture-in-picture
• Slim, upscale styling
• Home-cinema universal remote with backlighting
Rear-projection
Rear-projection
HDTV Monitor
HDTV Monitor
2
Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-
chase at once. And take advantage of these important benefits.
Return your Warranty Registration card today to ensure you
receive all the benefits you’re entitled to.
Congratulations
on your
purchase,
and welcome to the
“family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed prod­ucts available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome–and thanks for investing in a PHILIPS product.
Sincerely,
Lawrence J. Blanford President and Chief Executive Officer
Know these
safetysymbols
t This “bolt of lightning” indicates uninsulated material within your unit may cause an electri-
cal shock. For the safety of everyone in your household, please do not remove product covering.
s The “exclamation point” calls attention to features for which you should read the enclosed
literature closely to prevent operating and maintenance problems. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la
borne correspondante de la prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Warranty
Verification
Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS warranty.
Owner
Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Model
Registration
Returning your Warranty Registration Card right away guar­antees you’ll receive all the infor­mation and special offers which you qualify for as the owner of your model.
P.S. Remember, to get the most from your PHILIPS
product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now!
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
Hurry!
Visit our World Wide Web Site at http://www.philips.com
3
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or ground­ing-type plug. Apolarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manu­facturer.
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the ap-
p- paratus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental con­siderations. For disposal or recycling information, please contact your local authorities or the Electronic Industries
Alliance: www.eiae.org
16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
17. Tilt/Stability - All televisions must comply with recommend­ed international global safety standards for tilt and stability properties of its cabinet design.
• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPANo. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below.
21. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclo­sure through openings.
Example of Antenna Grounding as per NEC - National Electric Code
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Rev. 8/13/01
GROUND CLAMP
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
(NEC SECTION 810-20)
Refer to the simple Quick Use and Setup Guide (supplied with your TV) for details on the following:
• Basic TV connections
•Television and remote-control operation
• On-screen menu controls
• Installation features.
Selecting the Stereo/Mono Sound Mode . . . . . . . . . . . . . .38
Selecting the SAP (Second Audio Program) Feature . . . . .39
Using the Bass Boost Control . . . . . . . . . . . . . . . . . . . . . .40
FEATURES
The Timer
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Displaying the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting the Timer’s Start Time and Stop Time . . . . . . . . .43
Selecting the Timer’s Channel . . . . . . . . . . . . . . . . . . . . .44
Setting the Timer’s Activate Control . . . . . . . . . . . . . . . .45
AutoLock™
Understanding AutoLock™ . . . . . . . . . . . . . . . . . . . . . . .46
Setting up the AutoLock™ Access Code . . . . . . . . . . . . .47
Using AutoLock™ to Block Channels . . . . . . . . . . . . . . .48
Using AutoLock™ to Block by Movie Rating . . . . . . . . .49
Using AutoLock™ to Block by TV Rating . . . . . . . . . . .50
Turning the AutoLock™ Blocking Control
on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Using AutoLock™ to Block Unrated Broadcasts . . . . . . .52
Using AutoLock™ to Block Broadcasts That
Have No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Reviewing Your Current AutoLock™ Settings . . . . . . . . .54
Using the Closed Captioning Control . . . . . . . . . . . . . . . . .55
Using the Picture-format Control . . . . . . . . . . . . . . . . .56–57
Using Active Control™ . . . . . . . . . . . . . . . . . . . . . . . . . . .58
APPENDIXES
Appendix A: Compatibility Information
for the TV’s High-definition Inputs . . . . . . . . . .59
Appendix B: Model Specifications . . . . . . . . . . . . . . . . . . .60
Appendix C: Setting Color Space for HD INPUT-AV 4 . . . .61
GENERAL INFORMATION
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63–64
Glossary of Television Terms . . . . . . . . . . . . . . . . . . . . . . .65
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . .67–68
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
CONTENTS
Items Included with This TV
As you unpack your TV, please note that this Directions for Use manual contains safety-tip information, the locations of factory-service centers, a warranty registration card, remote control, and batteries for the remote control. Please take a few minutes to complete your registration card. The serial number for the TV is on the rear of the set. Refer to page 62 for cleaning and care instructions.
INTRODUCTION
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . .2
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
CONNECTING ACCESSORY DEVICES
TO
YOUR TV
Panel Overview: Standard Inputs and Outputs . . . . . . . . . . .6
Panel Overview: High-definition Inputs . . . . . . . . . . . . . . . .7
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting a VCR and Cable Box . . . . . . . . . . . . . . . . . . . .9
Connecting and Using an Audio Hi-fi System
with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Making Optional Surround-sound Connections . . . . . . . . .11
Connecting a Standard DVD Player . . . . . . . . . . . . . . . . . .12
Connecting an S-Video Device . . . . . . . . . . . . . . . . . . . . .13
Connecting a DVD Player with Progressive-scan
Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Connecting an HD Receiver to the
HD INPUT-AV 4 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .15
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . .16
Connecting and Using Headphones
with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
USING THE REMOTE CONTROL
Programming the TV Remote to Work
with Accessory Devices . . . . . . . . . . . . . . . . . . . . .18
Using the Code-entry Method to Program Your
TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Using the Search Method to Program Your
TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Direct-entry Codes for A/V Accessory Devices . . . . . .21–22
Using the TV Remote with Accessory Devices . . . . . . . . .23
Using the AV and Source Select Buttons . . . . . . . . . . . . . .24
Using AutoSound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using AutoPicture™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Using AutoSurf™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Using Program List and Alternate Channel (A/CH) . . . . . .28
Using the Sleep Timer Control . . . . . . . . . . . . . . . . . . . . . .29
USING THE ON-SCREEN SUBMENUS
PICTURE
Adjusting the Picture Controls . . . . . . . . . . . . . . .30
Setting the Eye Fidelity Control . . . . . . . . . . . . . . . . . . . . .31
Setting the Dynamic Contrast Control . . . . . . . . . . . . . . . .32
Adjusting the Manual Converge Controls:
Converge Red/Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Adjusting the Manual Converge Controls:
Multipoint Red/Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
SOUND
Adjusting the Treble, Bass, and
Balance Controls . . . . . . . . . . . . . . . . . . . . . . . .35
Using the AVL (Audio Volume Leveler) Control . . . . . . . .36
Selecting the Surround-sound Modes . . . . . . . . . . . . . . . . .37
QUICK USE AND SETUP GUIDE
4
POWER
ACC
TV
VCR
ACTIVE
FREEZE
SWAP PIP CH
CONTROL
DN
UP
PICTURE
SOUND
MENU/
STATUS/
SELECT
EXIT
ppendixes
BC
A
5
FEATURES
Yo ur new projection television and its packaging contain materials that can be recycled and reused. Specialized companies can recy­cle your product to increase the amount of reusable materials and minimize the amounts that need to be properly disposed. The bat­teries used by your product should not be thrown away when depleted but should be handed in and disposed of as small chemi­cal waste. Please find out about the local regulations concerning how to dispose of your old television, batteries, and packaging
End-of-life Disposal
Philips HD Optics gives extreme resolution HD with cutting-edge
processing and display technology. Includes a Philips wideband video amplifier, microphosphor CRTs, hybrid projection lenses, first-surface mirror, and fine-pitched lenticular screen.
Auto IntelliSense™ Focus automatically adjusts picture conver-
gence at the push of a button. After reviewing a special test pat­tern, optical sensors send position information to the controller, which then corrects the pictures. Auto IntelliSense™ Focus responds to the natural and man-made magnetic field conditions where the TV is located, so you will always enjoy the best possible picture.
Automatic Phosphor Aging Compensation (APAC) works with
the set’s Automatic Format feature to prevent screen burn left by nonmoving images. Periodically, APAC automatically shifts your television picture in very small increments, but in increments large enough to blur image retention. APAC is like a screen saver for your TV.
Active Control™ continuously measures and corrects all incoming
signals to provide the best picture settings. This feature provides a sharp and virtually noise-free picture any time, from any NTSC source. NTSC is the
National Television Standards Committee for­mat devised in the 1940s for TV broadcast analog video signals (525 lines: 30 Hz).
Eye Fidelity gives you a choice between two different picture-
scanning techniques—progressive and interlaced. Progressive scan doubles the number of visible picture lines per field by displaying all picture frame lines at once, eliminating line flicker. The inter­laced mode provides for a double vertical display (interlaced) of progressive scan, which reduces annoying motion artifacts. The Interlaced mode also helps smooth out jagged lines sometimes seen on curved and angled surfaces.
Protective screen filter helps prevent accidental damage to the
delicate front lenticular screen. This filter has been specifically for­mulated by Philips for HD displays to give the best possible pic­ture and still protect your investment.
HD DVI and Component Inputs—DVI supports High-definition
Copy Protected digital video input for connection to compliant set­top boxes. The HD component connection (Y Pb Pr or RGB +HV0 offers color purity, crisp color detail, and reduced color noise.
3-D Y/C Digital Comb Filter (activated when using the tuner and
composite inputs) processes the video with spatial and temporal filtering, virtually eliminating cross-color and cross-luminance interference, improving video resolution. This filter uses extensive memory to analyze complete video fields, significantly reducing “dot crawl,” “hanging dots,” and “barber pole artifacts” on the image.
Double-window, two-tuner Picture-in-Picture (PIP) allows you
to watch two shows, side by side. No VCR is necessary for tuning PIP pictures. Your set’s two separate tuners let you select two shows and display both in windows of equal proportion.
Virtual Dolby* Surround (referred to as Dolby Virtual in the on-screen submenu) uses two speakers to simulate the surround
effect produced by a multichannel system.
Incredible Surround™ enhances stereo programs by making the
sound broader and fuller.
Center channel input, which has standard clip-on style speaker
connectors, simplifies the connection of surround-sound equipment for optimal home-theater enjoyment. Since it contains the dialog information, the center channel is vitally important to the overall performance of any large screen in a home-theater system.
Home-cinema universal remote control operates your TV set and
other devices that work by infrared remote control, such as VCRs,
cable converter boxes, satellite receivers, and others. Note:You may
need to program the remote to work with devices other than the TV. See pages 18–23.
Hi-fi stereo system, including a built-in audio amplifier and a twin
speaker system with 2-inch tweeters and 5-inch woofers. The sys­tem enables you to hear stereo sound or Second Audio Program (SAP) bilingual broadcasts when they are available.
Audio/video jacks allow direct connections with VCRs and other
accessories for quality TV picture and sound playback. Component video input jacks are provided for high-fidelity color and picture resolution when using digital video source material, such as a DVD.
Audio Volume Leveler (AVL) control keeps the TV’s sound at an
even level. Peaks and valleys that occur during program changes or commercial breaks are reduced, making for a more consistent, com­fortable sound.
AutoChron™ automatically sets the right time of day and main-
tains it with digital precision through brownouts, power failures, and even Daylight Savings Time adjustments.
AutoLock™ protects young children from objectionable program-
ming with V-chip technology.
AutoSound™ allows you to select from three factory-set controls
and a personal control that you set according to your own prefer­ences through the on-screen Sound submenu. The three factory-set controls—Voice, Music, and Theatre—enable you to tailor the TV sound to enhance the particular programming you are watching.
AutoSurf™ allows you to easily switch among only the channels
that are of interest to you. You can program up to 10 channels into the TV’s AutoSurf™ memory through the on-screen display.
Channel Edit allows you to add or remove channels from the list of
channels stored in the TV’s memory. Channel Edit makes it easy to limit or expand the number of channels that are available to you when you press the CH +/– buttons on your remote control.
Closed Captioning allows you to read TV program dialog or voice
conversations as on-screen text.
Dynamic Contrast helps sharpen the picture quality by making the
contrast between the dark and bright picture areas more noticeable as the image on screen changes.
As an Energy Star® Partner, Philips Consumer Electronics has determined this product meets the Energy Star® guidelines for energy efficiency. Energy Star® is a U.S. registered mark. Using products with the Energy Star® label can save energy. Saving energy reduces air pollution and lowers utility bills.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Active Control, APAC, AutoPicture, AutoSound, AutoSurf, Incredible Surround, and IntelliSense are trademarks of Philips Consumer Electronics. Copyright 2003 Philips Consumer Electronics. All rights reserved.
6
Connecting Accessory Devices to Your TV
Y
ou can connect a wide range of video and
audio devices to your TV, in various ways. This page and the next one provide an overview of signal compatibilities and the types of devices you can connect to the jacks. Connection examples follow on subsequent pages. See pages 1 and 2 of the Quick Use and Setup Guide that came with your set for exam­ples of basic connections. You may also want to refer to the user instructions that came with each particular device for information on con­nections.
What You Can Connect to the
Standard Panel Jacks
1
ANTENNA IN 75jack—use to con-
nect radio-frequency (RF) signals from VHF/UHF antennas or a cable system. These are 480i signals.
2
YPbPr (component video input [CVI] jacks)—compatible with 480i signals
only. Use to connect accessories having component video outputs, such as DVD players, laser-disc players, video-game players, satellite receivers, or other devices. Use the INPUT-AV 1 L(eft) and R(ight) AUDIO jacks for sound connec­tions. CVI is not accessible in the PIP window.
3
S-VIDEO (super video) jacks—com-
patible with 480i signals only. Use to connect accessories having Super VHS (S-VHS) outputs, such as VCRs, DVD players, laser-disc players, video-game players, satellite receivers, or other devices.
4
VIDEO (composite) jacks (INPUT-AV
1, INPUT-AV 2, and TV’s side jack panel [AV3])—compatible with 480i signals
only. Use to connect accessories having composite video outputs, such as VCRs, video-game players, or other devices.
5
AUDIO inputs (INPUT-AV 1, INPUT-AV 2, and TV’s side jack panel [AV3])—use to connect from the audio
output jacks on VCRs, DVDs, or other accessories.
6
OUTPUT (VIDEO/AUDIO)—video is
compatible with 480i signals only. Use to connect to a VCR to record programs from the TV. Or use the AUDIO outputs to connect to an audio hi-fi system.
7
AMP SWITCH, CENTER CHANNEL AMP INPUT, and SUBWOOFER Output—use to make
optional surround-sound connections (see page 11).
8
n Headphone jack—use to connect
headphones for personal listening.
PANEL OVERVIEW
:STANDARD INPUTS AND OUTPUTS
The side jack-panel inputs (recognized by the TV as AV3) are convenient for connecting a camcorder. See page 16.
cc
C
HECK IT OUT
Summary of signal compatibilities
TV Input
Compatible output signal
from an external source
or device
ANTENNA IN 75Ω, INPUT AV-1,YPbPr (component video inputs [CVI]), INPUT AV-2, and side jack panel (AV3)
480i (480 lines, interlaced)
Signal sources connected to the HD INPUT-AV 4 or HD INPUT-AV 5 jacks will provide the best picture (see page 7 for descriptions of those inputs). Among the standard (480i-compatible) inputs— ANTENNA IN 75Ω, INPUT AV-1, CVI [labeled Y, Pb, Pr], INPUT AV-2, and the side jack panel [AV3])—the best picture will come from signal sources connected to the CVI jacks. S-Video will provide the
HELPFUL HINTS
ANTENNA IN 75
1
4
S-VIDEO
L
3
5
Side Jack Panel
4
G
8
NOTE: The TV recognizes the side jack panel as AV3.
AMP SWITCH
EXT INT
+
CENTER CHANNEL AMP INPUT
6
INPUT-AV 1
VIDEO
AUDIO
Y
Pb
L
Pr
R
7
_
DVI
4
INPUT-AV 2 SUBWOOFEROUTPUT
VIDEO
S-VIDEO
L
L
AUDIO
R
2
3
5
3
5
Rear of TV
HD INPUT-AV 5
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
7
V
L
SYNC
AUDIO
H
R
AUDIO
L
R
7
Connecting Accessory Devices to Your TV
PANEL OVERVIEW
:HIGH-DEFINITION INPUTS
What You Can Connect to the
High-definition Input Jacks
1
HD INPUT-AV 4—use to connect dig-
ital equipment with a 1080i or a 480p signal output, such as HD receivers (1080i or 480p) or DVD players with progressive-scan capability (480p). You can connect equipment with YPbPr component video or RGB outputs to the HD INPUT-AV 4 jacks. H and V sync connections may or may not be required for RGB connections. (See page 59.) Dedicated audio input jacks are located with the HD INPUT-AV 4 video jacks.
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV 4.
2
HD INPUT-AV 5—use to connect digi-
tal equipment with DVI (digital video interface) 1080i or 480p output. DVI is a specific digital input allowing encrypt­ed transmission of uncompressed HD content. DVI includes HDCP (high­bandwidth digital content protection), which is supported by Hollywood, satellite providers, and most of the con­sumer electronics industry. DVI is gain­ing momentum and quickly becoming an industry standard for the consumer to view high-definition material while keep­ing content protected.
NOTE: The Picture-in-Picture (PIP)
feature is not available for use with AV5.
Summary of signal compatibilities
TV Input
Compatible output signal
from an external source
or device
HD INPUT-AV 4
1080i (1080 lines, interlaced) or 480p (480 lines, progressive scan)
• The TV’s default color-space setting for HD INPUT-AV 4 is YPbPr. If the picture looks grossly incorrect, try changing the color-space setting on either the digital equipment or the TV. For more information on setting the color space on the digital equipment, see the equip­ment’s directions-for-use manual. To set the TV’s color space, see page 61 in this manual.
• This television is designed to be compatible with high-definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Because output standards may vary by manu­facturer, you may encounter some digital equipment that will not properly display pic-
tures on the TV.
•The PIP (Picture-in-picture) feature
allows you to tune to a program in the main window and scan other channels in the PIP window. From a single antenna or cable input, signals are separat­ed into two signals within the television. The AV1, AV2, and AV3 inputs are also available as PIP sources.
HELPFUL HINTS
HD INPUT-AV 5
Digital video interface (DVI) with 1080i (1080 lines, interlaced) or 480p (480 lines, progressive scan)
Because DVI is such new technology, the elec­tronics industry is still working toward a deci­sion on one standard. Philips testing has deter­mined that compatibility issues exist with respect to a limited number of high-definition receivers when they are connected to the DVI input on this television. If you should experi­ence difficulties, please contact our Customer Care Center at 1-800-531-0039.
HELPFUL HINT
ANTENNA IN 75
VIDEO
S-VIDEO
L
AMP SWITCH
EXT INT
+
CENTER CHANNEL AMP INPUT
INPUT-AV 1
L
AUDIO
R
_
Y
Pb
Pr
Rear of TV
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
SYNC
R/Pr
B/Pb
V
L
AUDIO
H
R
INPUT-AV 2 SUBWOOFEROUTPUT
AUDIO
VIDEO
L
R
S-VIDEO
L
2 1
AUDIO
L
R
8
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
SLEEP
REC •
VCR
ACC
MENU/ SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
5
AV1
T
he TV’s audio/video (AV) input jacks provide
for direct picture and sound connections between the TV and accessory devices such as VCRs, DVD players, and others that have AV out­put jacks.
This example, which uses the INPUT-AV 1 jacks, shows you one way to connect a VCR to your TV.
Refer to the directions-for-use manual for your VCR for further information on connections.
To make the connections shown in this example, you will need:
• one coaxial cable (75)
• one cable for a video connection (standard
RCA connector)
•two cables for audio connections (standard
RCA connectors) (only one cable is needed for a nonstereo VCR).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect a cable TV or antenna signal to
the ANT IN jack on the rear of the VCR.
2
Connect from the OUT jack on the rear
of the VCR to the
ANTENNA IN 75
jack on the rear of the TV.
3
Connect the VIDEO OUT jack on the
rear of the VCR to the INPUT AV1 VIDEO jack on the rear of the TV.
4
Connect the audio output R(ight) and L(eft) jacks on the rear of the VCR to the
INPUT-AV 1 AUDIO jacks on the rear of the TV.
NOTE: If the VCR is a mono (nonstereo)
unit, connect only the left audio cable, which usually has a white connector.
5
Press the AV button on the remote con­trol as many times as necessary to select
the AV1 source for the viewing of materi­als from your VCR.
Connecting Accessory Devices to Your TV
CONNECTING A VCR
You can display the AV1, AV2, or AV3 signal sources in the PIP window. See page 8 of the
Quick Use and Setup Guide for information on
cc
C
HECK IT OUT
• Stereo sound will pass from the ANT OUT jack on the VCR to the ANTENNA IN 75Ω jack on the TV only when the VCR is in TV mode. This is the mode that allows the TV to use its channel selector.
•To simplify making connections, audio and video cables often have color-coded plugs. The jacks on your TV are likewise color coded to match the plugs. The cod­ing is as follows: —Yellow for video (composite) —Red for the right audio channel —White for the left audio channel
NOTE: If your VCR is mono (non-
stereo), you will connect only one audio cable. You must ensure that the TV is set to MONO for the signal source to which you’ve connected the VCR (
INPUT-AV
HELPFUL
HINTS
ANTENNA IN 75
2
CENTER CHANNEL AMP INPUT
3
VIDEO
S-VIDEO
L
L
AUDIO
R
Rear of VCR*
* (Example: Philips VCR model VR674CAT)
AMP SWITCH
EXT INT
+
Y
Pb
Pr
4
Rear of TV
_
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
L
L
SYNC
AUDIO
H
R
AUDIO
R
Cable TV Company
or VHF/UHF Antenna
Coaxial Cable
Lead-in from
AUDIO
INPUT-AV 2 SUBWOOFEROUTPUTINPUT-AV 1
VIDEO
S-VIDEO
L
L
R
1
AUDIO
L
ANT
IN
IN
OUT
R
VIDEO
OUT
CH3 CH4
IN
OUT
9
CONNECTING A VCR
AND CABLE BOX
P
resented here is a connection example
involving a VCR and cable box.
Refer to the VCR’s directions-for-use manual for further information on connections.
To make the connections in this example, you will need:
• one, two-way signal splitter
•two coaxial cables (75Ω)
• one cable for a video connection (standard RCA connector)
•two cables for audio connections (standard RCA connectors) (only one cable is needed for connection to a nonstereo VCR).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect a cable TV signal to a two-
way signal splitter.
2
Connect one of the two-way signal splitter outputs to the INPUT on the
cable box.
3
Connect the other two-way signal splitter output to the ANTENNA IN
75on the rear of the TV.
4
Connect from the cable box OUTPUT jack to the ANT IN jack on the rear of
the VCR.
5
Connect the VIDEO OUT jack on the VCR to the INPUT-AV 1 VIDEO
jack on the rear of the TV.
6
Connect the AUDIO OUT R(ight) and L(eft) jacks on the VCR to
INPUT-AV 1 AUDIO jacks on the rear of the TV.
NOTE: If the VCR is a nonstereo unit,
connect only the left audio cable, which usually has a white connector.
7
Press the AV button on the remote control as many times as necessary
to select the AV1 source for the view­ing of materials from your VCR.
Connecting Accessory Devices to Your TV
• The RF output on a cable box, usually labeled “OUTPUT,” “OUT,” or “TO TV,” will not pass a stereo sound signal to the ANTENNA IN 75jack on the TV. If, how­ever, your cable box has separate Audio/Video outputs, using A/V cables to connect to those outputs and to the A/V inputs on the TV might pass a stereo sound signal to the TV. Contact your cable TV company for more information.
•To simplify making connections, the plugs on audio and video cables are often color coded. The jacks on your TV are likewise color coded to match the plugs. The coding is as follows: —Yellow for video (composite) —Red for the right audio channel —White for the left audio channel
NOTE: If your VCR is mono (nonstereo),
you will connect only one audio cable. You must ensure that the TV is set to MONO for the signal source to which you’ve connected the VCR (INPUT-AV 2, INPUT-AV 1, or the side panel inputs [AV3]). Otherwise, you will receive sound from only one of the TV’s speakers. See page 38.
HELPFUL HINTS
Rear of VCR*
* (Example: Philips VCR model VR674CAT)
AV1
TV
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
7
SURF
ITR/ HOME HOME PERSONAL
ANTENNA IN 75
AMP SWITCH
3
EXT INT
+
CENTER CHANNEL AMP INPUT
5
INPUT-AV 1
Y
VIDEO
POWER
ACC
VCR
ACTIVE
CONTROL
DN
REC •
SAP
FREEZE
UP
PICTURE
MENU/ SELECT
MUTE
FORMAT
CH
213 546 879
SURF
0
PIP ON/OFF
SLEEP
PROG.LISTDOLBY VAV
S-VIDEO
L
AUDIO
Pb
L
Pr
R
Rear of TV
_
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
6
AUDIO
INPUT-AV 2 SUBWOOFEROUTPUT
VIDEO
S-VIDEO
L
L
R
R/Pr
B/Pb
V
L
AUDIO
L
AUDIO
R
R
SYNC
H
4
AUDIO
L
ANT
IN
IN
OUT
R
VIDEO
OUT
CH3 CH4
IN
OUT
Rear of Cable Box
Two-way
Signal
Splitter
Coaxial Cable Lead-in from
1
Cable TV Company
or VHF/UHF Antenna
INPUT
OUTPUT
2
10
CONNECTING AND U
SING AN AUDIO HI-FI SYSTEM WITH YOUR TV
Y
ou can use your TV’s AUDIO OUTPUT jacks
to connect to an external audio hi-fi system.
Follow the simple steps below. To make these connections, you will need two
cables for audio connections (standard RCA). NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect from the L(eft) and R(ight) AUDIO OUTPUT jacks on the rear of the
TV to the L(eft) and R(ight) AUX/TV INPUT jacks on the rear of the hi-fi system.
2
See the section below on using the
AUDIO OUT control.
A
fter connecting the TV’s AUDIO OUTPUT
jacks to the AUDIO INPUT jacks on an external hi-fi system, set the AUDIO OUT con­trol in the SOUND submenu to either VARI­ABLE or FIXED to determine whether you adjust the volume at the TV or at the external hi-fi system. To change the volume at the TV using the TV’s remote control, you must select VARIABLE. To adjust the volume at the stereo using the hi-fi’s controls, you must select FIXED. You can also use the SPEAKERS control in the SOUND submenu to turn the TV’s speakers off.
1
Press the MENU/SELECT button
on the remote control to show the on­screen menu.
2
Press the CURSOR RING DOWN
once to highlight SOUND.
3
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
4
Press the CURSOR RING DOWN
repeatedly until AUDIO OUT is high­lighted.
5
Press the CURSOR RING LEFT or RIGHT to set the AUDIO OUT to
either VARIABLE or FIXED.
6
If you want to turn the TV’s internal speakers off, press the CURSOR RING DOWN repeatedly until
SPEAKERS is highlighted. Then press the CURSOR RING LEFT or RIGHT to turn the speakers off.
7
Press the STATUS/EXIT button to
exit the menu.
Connecting Accessory Devices to Your TV
The sound outputs from the TV to an exter­nal hi-fi system are not affected or tailored by the TREBLE, BASS, BALANCE, AVL, INCR. SURROUND, and BASS BOOST controls in the TV’s SOUND submenu.
HELPFUL HINT
S-VIDEO
L
VIDEO
AUDIO
AMP SWITCH
EXT INT
+
CENTER CHANNEL AMP INPUT
INPUT-AV 1
L
R
Rear of TV
_
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
INPUT-AV 2 SUBWOOFEROUTPUT
Y
VIDEO
S-VIDEO
Pb
Pr
L
L
AUDIO
R
R/Pr
B/Pb
V
L
SYNC
H
L
AUDIO
AUDIO
R
R
ANTENNA IN 75
1
AUX/TV INPUT
L
PICTURE
SOUND
FEATURES INSTALL
R
PHONO INPUT
TREBLE BASS BALANCE AVL INCR . SURROUND
POWER
Rear
of Hi-fi
SOUND
TREBLE 30
BASS BALANCE AVL INCR . SURROUND
SOUND
5
7
2,4,
6
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
TV
VCR
ACTIVE
CONTROL
DN
UP
MUTE
213 546 879 0
POSITION
PIP
ACC
SURF
FREEZE
PICTURE
MENU/ SELECT
INCR . SURROUND HEADPHONE STEREO SAP
AUDIO OUT FIXED
3
OR
AUDIO OUT VARIABLE
SOUND
CH
1
HEADPHONE STEREO SAP
AUDIO OUT
SPEAKERS OFF
OR
SPEAKERS ON
MAKING OPTIONAL SURROUND-SOUND CONNECTIONS
Connecting Accessory Devices to Your TV
*“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Y
our TV has extra jacks that allow you to con-
nect to an external audio amplifier system and a powered subwoofer. This connection option will provide a surround-sound experience similar to a movie theater or concert hall.
To make the connections shown in this example, you will need:
two cables for audio connections (standard RCA connectors)
•four paired wires for speaker connections
• one cable for a subwoofer connection
(standard RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect from the Center Speakers out­put jacks on the amplifier with Dolby Pro
Logic* or Dolby Digital to the correspon­ding CENTER CHANNEL INPUT jacks on the rear of the TV. Place the TV’s AMP switch in the EXT (external) position.
2
Connect from the L(eft) and R(ight) AUDIO OUTPUT jacks on the rear of the
TV to the L(eft) and R(ight) TV IN jacks on the rear of the Dolby receiver.
3
Connect from the receiver’s front and surround speaker connectors to the front
and rear surround speakers.
4
Connect from the SUBWOOFER output jack on the rear of the TV to the L(eft) and
R(ight) Low Level Input jacks on the rear of the powered subwoofer.
5
Set the TV’s AUDIO OUT control to FIXED. See page 10.
The diagram below, right shows how to arrange the speakers and subwoofer for surround sound.
• If you use a single cable to make the connec­tion to the powered subwoofer, you will need to increase the volume on the back of the subwoofer to compensate for the absence of the second cable.
•You must adjust the trim of the powered sub-
woofer at the powered subwoofer. Trim refers
H
ELPFUL HINTS
11
Front Speakers
3
ANTENNA IN 75
2
AMP SWITCH
EXT INT
_
+
CENTER CHANNEL AMP INPUT
Y
VIDEO
S-VIDEO
Pb
L
L
AUDIO
Pr
R
Powered Subwoofer
ANTENNA IN 75
1
Rear of Amplifier with Dolby Pro Logic or Dolby Digital
INPUT-AV 2 SUBWOOFEROUTPUTINPUT-AV 1
VIDEO
S-VIDEO
L
L
AUDIO
R
NOTE: The gray circle indicates the primary viewing area.
Speaker
AMP SWITCH
EXT INT
_
+
CENTER CHANNEL AMP INPUT
Y
VIDEO
S-VIDEO
Pb
L
L
AUDIO
Pr
R
Rear of TV
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
L
L
SYNC
AUDIO
AUDIO
H
R
R
Surround-sound Setup
(Center Speakers)
Front
1
Rear of TV
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
INPUT-AV 2 SUBWOOFEROUTPUTINPUT-AV 1
VIDEO
S-VIDEO
L
L
AUDIO
R
R/Pr
B/Pb
V
L
SYNC
AUDIO
H
R
Rear of Powered Subwoofer
90
150 Hz
Crossover Frequency
TV
L
AUDIO
R
Front
Speaker
Rear Speakers
+-
110
Volume
R
+ R – – L +
-180 Phase 0
L
+
-
o
o
4
Low Level Input
High Level Input
High Level Output
Powered
Subwoofer
Rear
Speaker
Rear
Speaker
12
CONNECTING A STANDARD DVD PLAYER
C
omponent video inputs allow the highest pos-
sible color and picture resolution in the play­back of digital signals, such as those of DVD players. The color difference signals (Pb, Pr) and the luminance (Y) signal are connected and received separately. The result is better color bandwidth information than is possible with com­posite video (labeled VIDEO on your TV’s jack panel) or S-Video connections.
To make the connections shown in this example, you will need:
• three cables for video connections (standard
RCA connectors)
•two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect the YPbPr (component) VIDEO OUT jacks from the DVD player
to the INPUT-AV 1 YPbPr (component video) jacks on the rear of the TV.
NOTE:The INPUT-AV 1 YPbPr jacks will accept 480i (interlaced) output sig­nals only. The connection example on this
page assumes the use of a DVD player with interlaced output. Some DVD play­ers, however, have YPbPr outputs that can be switched between interlaced and pro­gressive scan. If you are attempting to use a DVD player with progressive-scan (480p output) capability to make the connection shown in this example, you must be sure to switch the DVD player to interlaced. If necessary, refer to the DVD player’s direc­tions-for-use manual for help. If you want to use the DVD player in progressive-scan mode, you must use the HD INPUT-AV 4 jacks (see page 14).
2
Connect the AUDIO OUT L(eft) and R(ight) jacks from the DVD player to the
INPUT-AV 1 AUDIO jacks on the rear of the TV.
3
Press the AV button on the remote con­trol as many times as necessary to select
the CVI (component video input) source on the TV for the viewing of materials from your DVD player.
Connecting Accessory Devices to Your TV
•To simplify making connections, the con­nectors on audio and video cables are often color coded. The jacks on your TV are like­wise color coded to match the connectors.
• The names for the component video jacks may differ depending on the DVD player or accessory digital source equipment used. For example, besides YPbPr, you may see R-Y/B-Y/Y; or CrCbY. Although abbrevia-
tions and terms may vary, the letters B and R stand for the blue and red color compo­nent signal connectors, respectively, and Y
indicates the luminance signal. If necessary, refer to the directions-for-use manual for your DVD or digital accessory for more information.
•You can also connect a satellite receiver to the TV in a manner similar to the example shown on this page. If you connect a satel­lite receiver to the TV, you will need to use the receiver’s channel-memorization system to store channels in the receiver’s memory.
• If you experience difficulties receiving sound with a DVD disc, check the sound settings through the DVD disc’s menu.
• CVI is not accessible in the PIP window.
See page 8 in the Quick Use and Setup Guide for more on the PIP feature.
HELPFUL HINTS
To prevent uneven picture-tube aging, do not leave nonmoving images or picture borders on the screen for an extended period. See page 62.
WARNING
ANTENNA IN 75
2
S-VIDEO
L
Rear of DVD Player*
PCM-MPEG2-Dolby Digital-DTS
COAXIAL
*(Example: Philips DVD model DVD712)
CVI
POWER
ACC
VCR
ACTIVE
CONTROL
FREEZE
UP
PICTURE
MENU/
SELECT
MUTE
CH
213 546 879
SURF
0
PIP ON/OFF
SLEEP
FORMAT
PROG.LISTDOLBY VAV
HOME
PERSONAL
MOVIES
PIPPOSITION
3
TV
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
ITR/
RECORD
DN
SURF
REC •
SAP
HOME VIDEO
CENTER CHANNEL AMP INPUT
INPUT-AV 1
VIDEO
L
AUDIO
R
DIGITAL AUDIO OUT
OPT OUT
AMP SWITCH
EXT INT
+
Y
Pb
Pr
SUB WF OUT
_
1
INPUT-AV 2 SUBWOOFEROUTPUT
VIDEO
S-VIDEO
L
L
AUDIO
R
1
2
R
AUDIO OUT
Rear of TV
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
R/Pr
B/Pb
V
SYNC
H
1
2
PR/C
L
VIDEO OUT
R
(CVBS)
VIDEO OUT
AUDIO
L
L
AUDIO
R
R
Y
B/CB
P
(Y/C)
S-VIDEO OUT
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
ITR/
RECORD
HOME VIDEO
HOME
MOVIES
PERSONAL
SLEEP
REC •
VCR
ACC
MENU/
SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
3
AV2
T
he S(uper)-Video connection on the rear (and
side panel) of the TV can give you better pic­ture detail and clarity for the playback of S-VHS VCR tapes or DVDs than the normal antenna (RF signal) or Video (composite) picture connec­tions. The example given connects a DVD/VCR Combi unit to the INPUT-AV 2 jacks on the rear of the TV.
NOTE: The accessory device must have an S-VIDEO output jack to make the connection explained on this page.
To make the connections, you will need:
• one S-Video cable
•two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect the S-VIDEO OUT jack on the
rear of the accessory device with S-VIDEO output to the INPUT-AV 2 S-VIDEO jack on the rear of the TV.
2
Connect the DVD/VCR AUDIO OUT jacks on the rear of the accessory device
to the INPUT-AV 2 AUDIO input jacks on the rear of the TV.
3
Press the AV button on the remote con­trol as many times as necessary to select
the AV2 source on the TV for the viewing of materials from your S-Video device.
Connecting Accessory Devices to Your TV
CONNECTING AN S-VIDEO DEVICE
•To simplify making connections, audio cables are often color coded: red for the right channel, and white for the left chan­nel. The jacks on your TV are likewise color coded to match the connectors. To make S-Video connections, you must use an S-Video cable.
•You can also connect a satellite receiver, laser-disc player, video-game player, or other accessory device with S-Video capability to the TV in a manner similar to the example shown on this page.
• If you connect a satellite receiver to the TV, you will need to use the receiver’s channel-memorization system to store channels in the receiver’s memory.
HELPFUL HINTS
Video sources that show a constant nonmov­ing pattern on the TV screen can cause pic­ture-tube damage. When you are not using your video accessory devices, turn them off. Also, regularly alternate the use of accessory video sources with normal TV viewing. See page 62.
WARNING
13
CENTER CHANNEL AMP INPUT
INPUT-AV 1
VIDEO
L
AUDIO
R
AMP SWITCH
EXT INT
_
+
Y
Pb
Pr
ANTENNA IN 75
S-VIDEO
L
Rear of Device with S-VIDEO Output*
DVD/VCR
OUT
AUDIO R
VIDEO
CH3 CH4
IN
L
DVD/VCR
AUDIO OUT
L
R
ANT-IN
ANT-OUT
*(Example: Philips DVD/VCR Combi model DV910VHS)
Rear of TV
HD INPUT-AV 5
DVI
HD INPUT-AV 4
G/Y
1
SYNC
R/Pr
B/Pb
V
H
L
AUDIO
R
DIGITAL AUDIO OUT PCM / BITSTREAM
S-VIDEO
OUT
AUDIO
OPTICAL
L
R
COMPONENT
VIDEO OUT
Y
COAXIAL
Cr
Cb
AUDIO
2
INPUT-AV 2 SUBWOOFEROUTPUT
VIDEO
S-VIDEO
L
L
R
14
T
he following instructions explain how to
connect a DVD player with progressive-scan capability to the HD INPUT-AV 4 jacks on your TV.
To make the connections, you will need:
• three cables for video connections (standard
RCA connectors)
•two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect from the YPrPb jacks on
the
rear of the DVD player to the
HD INPUT-
AV 4 G/Y, R/Pr, B/Pb jacks
on the rear of the TV.
2
Connect from the L(eft) and R(ight) AUDIO OUT jacks on the rear of the
DVD player to the HD INPUT-AV 4 AUDIO L(eft) and R(ight) jacks on the rear of the TV
.
3
Make sure the DVD player is in pro­gressive-scan mode. You will not get a viewable picture through the HD INPUT-AV 4 jacks if the DVD player is in interlaced mode.
For more information on placing your DVD player in progressive-scan mode, see the DVD player’s directions-for-use manual. Also, see the Helpful Hints to the right. The way in which progres­sive-scan mode is selected varies among DVD players.
4
Press the AV button on your TV remote control as many times as necessary to
select the
AV4 signal source for the view­ing of materials from your progressive­scan DVD player.
If you experience difficulties receiving sound with a DVD disc, check the sound
HELPFUL HINT
To prevent uneven picture-tube aging, do not leave nonmoving images or picture borders on the screen for an extended period. See page 62.
WARNING
CONNECTING A DVD P
LAYER WITH PROGRESSIVE-SCAN CAPABILITY
Connecting Accessory Devices to Your TV
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
ITR/
RECORD
HOME VIDEO
HOME
MOVIES
PERSONAL
SLEEP
REC •
PIPPOSITION
VCR
ACC
MENU/ SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
4
AV4
• If after connecting your DVD player your display is filled with wavy lines, it may be that your DVD player is not set to progres­sive-scan mode. Some DVD players have an I/P (interlaced/progressive scan) switch located on the back or front of the players for changing from interlaced to progressive-scan mode. Other DVD players may allow the mode to be changed by pressing a button on the DVD player’s remote control or by using
the DVD player’s on-screen menu. If the
interlaced/progressive-scan selection option is provided only through the DVD on-screen menu, you will need to connect the DVD player to another AV input source in addition to HD INPUT-AV 4 to see the DVD menu. Select this additional AV source on screen to see the DVD menu and choose progressive-scan mode. You will then be able to see the DVD picture through the AV4 source.
• Some DVD players have dedicated progres­sive-scan output jacks that are labeled as such and require no switching to provide a picture through the HD INPUT-AV 4 jacks. See your DVD player’s directions-for-use manual for information.
• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr. RGB is also an option. If the picture’s color looks grossly incorrect, try changing either the DVD player’s or TV’s color-space setting. See the DVD player’s directions-for-use manual for information on setting its color space. Or see page 61 in this manual to set the TV’s color space.
•The Picture-in-Picture (PIP) feature does not function with AV4 or AV5.
HELPFUL HINTS
CENTER CHANNEL AMP INPUT
INPUT-AV 1
VIDEO
L
AUDIO
R
AMP SWITCH
EXT INT
+
Pb
Pr
Rear of TV
_
HD INPUT-AV 5
DVI
HD INPUT-AV 4
INPUT-AV 2 SUBWOOFEROUTPUT
Y
VIDEO
S-VIDEO
L
L
AUDIO
R
AUDIO OUT
2CH
BITSTREAM
/PCM
L
R
OPTICAL
COAXIAL
DIGITAL
1
G/Y
R/Pr
AUDIO
2
L
R
AC IN ~
B/Pb
V
L
SYNC
AUDIO
H
R
ANTENNA IN 75
S-VIDEO
L
VIDEO OUT
3
Rear of DVD Player with Progressive-scan Capability
Y
VIDEO
B
P
PR
SELECT
I
S
P
• HD receivers will supply stereo sound to the TV only through the audio left and right cables, not through the coaxial cable.
• Making a standard connection along with the HD connection as shown in the example (S-VIDEO) on this page will allow you to see the receiv­er’s on-screen menu and a picture (valid signal) from the receiver should it be switched to SD mode.
•The HD INPUT-AV 4 jacks are for standard RCA-type phono plugs. Your HD receiver may use RCA or BNC output jacks. If your HD receiver comes with BNC jacks, you will need to purchase BNC-to-RCA adapters to connect the receiver to the TV. You should be able to pur­chase these adapters at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
•The HD INPUT-AV 4 jacks are compatible with some digital equipment having RGB outputs with “sync on green” or RGB with “separate H and V sync.” Output standards for digital equipment, however, may vary by manu­facturer. No industry standards have been established for HD television RGB signal systems, timing, synchronization, and signal strengths. If the digital equipment you want to connect to your TV offers both component video and RGB outputs, component video is the suggested connection to use.
• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr. RGB is also an option. If the picture color looks grossly incorrect, try changing either the receiver’s or TV’s color space. See the receiver’s directions-for-use manual for information on setting its color space. Or see page 61 in this manual for setting the TV’s AV4 color space.
•AV4 and AV5 do not function with the PIP feature. They cannot be dis­played in the PIP window, nor can the PIP window be displayed when those signal sources are being viewed on the main screen.
15
CONNECTING AN HD R
ECEIVER TO THE HD INPUT-AV 4 JACKS
Connecting Accessory Devices to Your TV
BNC-to-
RCA
Adapter
BNC
Connector
Adapter
Fitted to
Connection
OR
RCA
Connector
D
igital equipment with a 1080i or 480p out­put, is compatible with the HD INPUT-AV 4
video jacks. NOTE: This television is designed to be compati-
ble with high-definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Because output standards may vary by manufacturer, you may encounter some digital equipment that will not properly display pictures on the TV.
To make the connections shown in this example, you will need:
• one S-VIDEO cable
• three cables for video connections (standard RCA connectors)
•four cables for audio connections (standard RCA connectors)
• one coaxial cable (75).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect S-VIDEO and audio cables. NOTE: This example uses
INPUT-AV 1. You can use INPUT-AV 2 or the side input jacks if you want.
• Connect an S-VIDEO cable from the HD receiver’s S-VIDEO jack to the TV’s INPUT-AV 1 S-VIDEO jack.
• Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s INPUT-AV 1 L(eft) and R(ight) AUDIO jacks.
2
Connect component video and audio cables to the TV’s HD inputs.
• Connect from the YPRPB jacks on the HD receiver to the TV’s HD INPUT-AV 4 G/Y, R/Pr, B/Pb jacks.
• Connect from the HD receiver’s AUDIO L(eft) and R(ight) jacks to the TV’s HD INPUT-AV 4 L(eft) and R(ight) AUDIO jacks.
3
Connect coaxial cables.
• Connect the coaxial cable lead-in from your cable outlet, cable converter box, or VHF/UHF antenna to the IN FROM ANT jack on the HD receiver.
• Connect a coaxial cable from the OUT TO TV jack to the ANTENNA IN 75 jack on the TV.
• Connect the coaxial cable lead-in from a satellite dish antenna to the SATELLITE IN jack on the HD receiver.
4
Refer to the directions-for-use manual that came with the HD receiver for setup instructions.
HELPFUL H
INTS
ANTENNA IN 75
3
INPUT-AV 2 SUBWOOFEROUTPUT
Y
VIDEO
1
Pb
L
AUDIO
Pr
R
VCR
DIGITAL
AUDIO OUT
Coaxial Cable Lead-in
from Cable Outlet,
Cable Converter Box,
or VHF/UHF Antenna
S-VIDEO
L
1
Rear of HD Receiver (Example: Philips DSHD800)
INPUT-AV 1
VIDEO
S-VIDEO
L
L
AUDIO
R
AUDIO
AUDIO
Y
PB
RF
PR
REMOTEPHONE JACK
L
L
CONTROL
RR
VIDEOVIDEO
S-VIDEO
Rear of TV
HD INPUT-AV 5
DVI
HD INPUT-AV 4
OUT TO TV
CH 3 CH 4
IN FROM ANT SATELLITE IN
G/Y
R/Pr
B/Pb
V
SYNC
H
3
2
2
L
L
AUDIO
AUDIO
R
R
3
Coaxial Cable
Lead-in
from
Satellite
Dish Antenna
16
CONNECTING A C
AMCORDER
T
he side panel jacks provide a convenient way
for you to connect a camcorder to your TV. The side panel jacks are recognized by your TV as AV3.
You can obtain S-VIDEO quality with an S-VHS, Hi-8, or digital camcorder by connecting to the S-VIDEO input instead of the VIDEO (composite) input.
To make the connections shown in this example, you will need:
• an S-VIDEO cable
•two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.
1
Connect from the S-VIDEO output on
the camcorder to the S-VIDEO input in the TV’s side panel.
2
Connect from the AUDIO outputs on the camcorder to the side panel AUDIO
L(eft) and R(ight) inputs.
3
Press the AV button on the remote con­trol as many times as necessary to select the AV3 source on the TV.
4
Turn the camcorder on, insert a video­tape and press PLAY to view the tape on the TV.
Connecting Accessory Devices to Your TV
PIP ON/OFF
213 546 879 0
TV
SWAP PIP CH
DN
UP
ACTIVE
CONTROL
FREEZE
SOUND
MUTE
SURF
A/CH
POWER
PICTURE
STATUS/
EXIT
SURF
ITR/
RECORD
HOME VIDEO
HOME
MOVIES
PERSONAL
SLEEP
REC •
PIPPOSITION
VCR
ACC
MENU/
SELECT
VOL
CH
TV/VCR
FORMAT
SAP
PROG.LISTDOLBY VAV
3
AV3
To simplify making connections, the con­nectors on audio cables are often color coded: red for the right channel, and white for the left channel. The jacks on your TV are likewise color coded to match the con­nectors. To make S-Video connections, you
HELPFUL HINT
Typical
Camcorder
S-VIDEO
DV
1
Side Jack Panel
VIDEO AUDIO
LEFT RIGHT
S-VIDEO
VIDEO
L
AUDIO
R
G
2
17
CONNECTING AND U
SING HEADPHONES WITH YOUR TV
T
he HEADPHONE controls allow you to adjust the volume and balance of the
sound going to the headphones.
1
Press the MENU/SELECT button
on the remote control to show the on­screen menu.
2
Press the CURSOR RING DOWN
once to highlight SOUND.
3
Press the CURSOR RING RIGHT
to enter the SOUND submenu.
4
Press the CURSOR RING DOWN
repeatedly until HEADPHONE is highlighted. Then press the CURSOR RING RIGHT to enter the HEADPHONE submenu.
5
Press the CURSOR RING DOWN or UP to highlight VOLUME or
BALANCE. Then press the CURSOR RING LEFT or RIGHT to adjust the control.
6
Press the STATUS/EXIT button to
exit the menu.
T
he TV’s side panel has a headphone jack for
personal listening.
1
Insert the headphone plug into the head­phone jack ; in the TV’s side panel.
2
Turn down the TV’s volume or press the Mute button
cc
on the remote con-
trol to turn off the TV’s internal speakers.
See the section below for information on adjusting headphone volume and balance.
NOTE: The headphone impedance must
be between 8 and 4,000 ohms. The head­phone jack is stereo and 3.5 mm in size.
Connecting Accessory Devices to Your TV
The AVL, INCR. SURROUND, and BASS BOOST controls do not function with the
HELPFUL HINT
Side Jack Panel
G
1
PICTURE
MENU/ SELECT
2
MUTE
CH
SOUND
TREBLE 30
BASS BALANCE AVL INCR . SURROUND
PICTURE
SOUND
FEATURES INSTALL
2
TREBLE BASS BALANCE AVL INCR . SURROUND
STATUS/
EXIT
VOL
SOUND
6
STATUS/
2,4,
5
TV
SWAP PIP CH
SOUND
EXIT
VOL
TV/VCR
A/CH
POWER
ACC
VCR
ACTIVE
FREEZE
CONTROL
DN
UP
PICTURE
MENU/
SELECT
MUTE
213 546 879
SURF
0
POSITION
PIP
CH
3
1
SOUND
TREBLE BASS BALANCE INCR . SURROUND
HEADPHONE
SOUND
HEADPHONE
VOLUME 30
BALANCE
SOUND
HEADPHONE
VOLUME
BALANCE 0
VOLUME BALANCE
18
PROGRAMMING THE
TV REMOTE TO WORK WITH ACCESSORY DEVICES
Y
our TV remote is capable of working not
only your TV but also other infrared remote (IR) controlled devices such as VCRs, cable TV converter boxes, satellite receivers, DVD players, and laser-disc players.
If you want to use your TV remote to oper­ate a VCR or other accessory device, you will need to perform this initial check explained in this section. You may also need to go to the sections on the “Code-entry Method” and the “Search Method” in the pages that follow.
1
Press the VCR or ACC(essory) mode button on the TV remote for
the desired accessory device category.
NOTE: Pressing the VCR mode button
allows access to product codes for VCRs. Pressing the ACC(essory) mode button allows access to the product codes for cable TV converters, satellite receivers, DVD players, and laser-disc players.
2
Point the TV remote toward the desired accessory device and press the POWER button.
Does the remote turn the accessory device on?
If yes, and try other function but-
tons on the TV remote. With a VCR, for example, try the Play, Stop, and Rewind buttons, for example. (See page 23 for information on how the remote buttons correspond with acces­sory device functions.) If they also work the accessory device, then the remote is ready and no further steps are needed.
If not, do the following: Look up a four-digit remote code
number on pages 21 or 22 for your
brand of accessory device. Then go through the simple steps for entering a four-digit code as explained on page 19.
Using the Remote Control
If more than one four-digit code number is listed, you may have to try more than the first number given to locate your device’s
HELPFUL HINT
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
Satellite Receiver
Cable Converter Box
DVD Player
VCR
1
TV
VCR
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
ACTIVE
CONTROL
DN
UP
MUTE
213 546 879 0
POWER
ACC
FREEZE
PICTURE
SURF
MENU/
SELECT
2
1
CH
POSITION
PIP
19
USING THE CODE-ENTRY METHOD TO PROGRAM YOUR TV REMOTE
N
ow that you have looked up the four-
digit remote-control Direct-entry Code for your brand of accessory device, you are ready to follow the simple steps shown below to program your TV remote.
Please read through all the steps before beginning.
1
First, press and hold down the VCR or ACC (for an accessory device other than a VCR) mode button on
the TV remote. Then press and hold down the MENU/SELECT button at the same time for a brief moment. Release the buttons. The TV remote back light will switch on. NOTE: For correct operation, you must first press and hold the mode button and then press and hold the MENU/SELECT button simultaneously.
2
Within 30 seconds of pressing the VCR (or ACC) button and MENU/SELECT button, enter a four-digit code for the accessory device (see pages 21 and 22).
If you make a mistake while attempt­ing to enter the four-digit code and want to start again, press any button other than one with a number. Then return to step 1 to begin again.
3
Point the remote at the accessory device. Then press the POWER button
on the remote to turn the device on.
Using the Remote Control
• If you do not enter a complete code within 30 seconds, you will need to perform step 1 of the Code-entry Method again.
• If you enter more than four digits, the unit will retain the first four digits entered.
• If the procedure explained above does not
work the first time, repeat the steps using the same remote code number.
• If after a second try the remote does not
operate your accessory device, and more code numbers are listed for your brand, use the next listed code number.
• If after repeated attempts the Entry-code
Method does not allow you to work your accessory device with your TV remote, try the Search Method explained on the next page.
HELPFUL HINTS
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
Satellite Receiver
Cable Converter Box
DVD Player
VCR
1
TV
VCR
SWAP PIP CH
SOUND
STATUS/
EXIT
ACTIVE
CONTROL
DN
UP
POWER
ACC
FREEZE
PICTURE
MENU/ SELECT
3
1
2
VOL
MUTE
213 546 879
TV/VCR
A/CH
0
POSITION
CH
SURF
PIP
20
USING THE S
EARCH METHOD TO PROGRAM YOUR TV REMOTE
Y
our TV remote can be set to work various
accessory devices (VCRs, cable convert­ers, and satellite receivers, for example) by what is called the Search Method.
NOTE: The Search Method works only with devices equipped with channel-display indi­cators on the devices themselves or the abili­ty to show channel numbers on the TV screen. If the Code-entry Method (shown in the previous section) did not enable your TV remote to work your accessory device, then follow the easy steps listed below. Please read the steps once before performing them.
1
Turn on the desired device. Press and hold down the VCR or ACC (for an accessory device other than a VCR) mode button on the TV
remote. Then press and hold down the SURF button as you hold down the desired mode (VCR or ACC) button.
NOTE: For correct operation, you
must press and hold down the desired mode (VCR or ACC) button first and then press and hold down the SURF button second.
While holding down the SURF and the desired mode (VCR or ACC) buttons simultaneously, point the remote toward the accessory device
and continue holding the buttons down.
2
Watch the Channel Indicator on your accessory device. Channel num-
bers will scan up when the TV remote has identified the correct code for your accessory device. This may take several minutes.
3
Release the mode (VCR or ACC) and SURF buttons as soon as chan­nel numbers start to scan up. The
scanning means that your TV remote has found the code for your accessory device.
NOTE:
If no channel change happens
after several minutes, repeat steps 1 and
2. Then if a channel change still does not occur, the remote will not work with the desired accessory device.
Using the Remote Control
•The remote’s back light will blink as the remote moves through its product code list. After the remote identifies the product code for your accessory device and you release the remote buttons, the back light will blink twice.
•Your TV remote may locate the accessory device’s code quickly or within several minutes.
• Don’t let the accessory device scan up more than five channels when the correct code is found— the remote may pass up the right code and have to repeat the search cycle.
HELPFUL HINTS
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
Satellite Receiver
Cable Converter Box
06
07
08
1,3
TV
SWAP PIP CH
SOUND
STATUS/
EXIT
VOL
TV/VCR
A/CH
06
09
VCR
06
POWER
ACC
VCR
ACTIVE
FREEZE
CONTROL
DN
UP
PICTURE
MENU/ SELECT
MUTE
213 546 879
SURF
0
POSITION
PIP
07
07
CH
08
09
08
09
1,3
1,3
21
DIRECT-ENTRY
CODES FOR A/V ACCESSORY DEVICES
S
EE THE NEXT PAGE FOR MORE CODES.
Using the Remote Control
VCR
CODE NUMBER
DENON . . . . . . . . . . . . . . . .0859
GE . . . . . . . . . . . . . . . . . . .0862
H
ARMAN/KARDON . . . . . . . .0871
H
ITACHI . . . . . . . . . . . . . . . .0870
JVC . . . . . . . . . . . . . . . . . .0868
KENWOOD . . . . . . . . . . . . .0865
MAGNAVOX . . . . . . . . . . . . .0860
MARANTZ . . . . . . . . . . . . . .0866
MITSUBISHI . . . . . . . . . . . . . .0861
ONKYO . . . . . . . . . . . . . . . .0860
O
PTIMUS . . . . . . . . . . . . . . .0869
P
ANASONIC . . . . . . . . . . . . .0859
PHILIPS . . . . . . . . . . . . . . . . .0866, 0860
PIONEER . . . . . . . . . . . . . . .0869, 0863
PROSCAN . . . . . . . . . . . . . . .0862
RCA . . . . . . . . . . . . . . . . . .0862, 0869
SAMSUNG . . . . . . . . . . . . . . .0870
SONY . . . . . . . . . . . . . . . . .0864
T
ECHNICS . . . . . . . . . . . . . .0859
T
HETA DIGITAL . . . . . . . . . . .0869
TOSHIBA . . . . . . . . . . . . . . .0860
YAMAHA . . . . . . . . . . . . . . .0859, 0867
ZENITH . . . . . . . . . . . . . . . .0872, 0860
DVD PLAYER
CODE NUMBER
ADMIRAL . . . . . . . . . . . . . . .0075, 0236
ADVENTURA . . . . . . . . . . . . .0027
AIKO . . . . . . . . . . . . . . . . . .0305
AIWA . . . . . . . . . . . . . . . . .0334, 0495, 0027, 0064
AKAI . . . . . . . . . . . . . . . . . .0133, 0080, 0068, 0076,
. . . . . . . . . . . . . . . . . . . . .0088, 0183, 0269
AMERICA A
CTION . . . . . . . . .0305
A
MERICAN HIGH . . . . . . . . . .0062
ASHA . . . . . . . . . . . . . . . . .0267
AUDIOVOX
. . . . . . . . . . . . . .0064
B
EAUMARK . . . . . . . . . . . . . .0267
BELL & HOWELL . . . . . . . . . .0131
BROKSONIC . . . . . . . . . . . . .0148, 0211, 0029, 0236,
. . . . . . . . . . . . . . . . . . . . .0238, 0322, 0388, 0506
CCE . . . . . . . . . . . . . . . . . .0099, 0305
CALIX . . . . . . . . . . . . . . . . .0064
CANON . . . . . . . . . . . . . . . .0194, 0062, 0129
CAPEHART . . . . . . . . . . . . . .0047
CARVER . . . . . . . . . . . . . . . .0108
CINERAL . . . . . . . . . . . . . . .0305
CITIZEN . . . . . . . . . . . . . . . .0305, 0064
COLT . . . . . . . . . . . . . . . . .0099
CRAIG . . . . . . . . . . . . . . . . .0064, 0099, 0074, 0267,
. . . . . . . . . . . . . . . . . . . . .0298
CURTIS MATHES . . . . . . . . . .0062, 0068, 0087, 0189
CYBERNEX . . . . . . . . . . . . . .0078, 0267
DAEWOO . . . . . . . . . . . . . . .0305, 0588, 0047, 0072
DAYTRON . . . . . . . . . . . . . .0047
DENON . . . . . . . . . . . . . . . .0069
DYNATECH . . . . . . . . . . . . . .0027
ELECTROHOME . . . . . . . . . . .0064
ELECTROPHONIC . . . . . . . . . .0064
EMEREX . . . . . . . . . . . . . . . .0059
EMERSON . . . . . . . . . . . . . . .0211, 0029, 0236, 0305,
. . . . . . . . . . . . . . . . . . . . .0063, 0148, 0238, 0588,
. . . . . . . . . . . . . . . . . . . . .0235, 0321, 0506, 0088,
. . . . . . . . . . . . . . . . . . . . .0115, 0239, 0027, 0064,
. . . . . . . . . . . . . . . . . . . . .0070, 0095, 0322, 0388,
. . . . . . . . . . . . . . . . . . . . .0537
FISHER . . . . . . . . . . . . . . . . .0074, 0131, 0081, 0093
FUJI . . . . . . . . . . . . . . . . . . .0060, 0062
FUNAI . . . . . . . . . . . . . . . . .0027
GE . . . . . . . . . . . . . . . . . . .0062, 0087, 0075, 0092,
. . . . . . . . . . . . . . . . . . . . .0229, 0267
GARRARD . . . . . . . . . . . . . .0027
GO VIDEO . . . . . . . . . . . . . .0306, 0459, 0553, 0259
GOLDSTAR . . . . . . . . . . . . . .0064, 0045, 0065, 0498,
. . . . . . . . . . . . . . . . . . . . .0507
GRADIENTE . . . . . . . . . . . . .0035, 0027, 0435
GRUNDIG . . . . . . . . . . . . . . .0222
HI-Q . . . . . . . . . . . . . . . . .0074
H
ARLEY DAVIDSON . . . . . . . .0027
H
ARMAN/KARDON . . . . . . . .0065, 0102, 0108
H
ARWOOD . . . . . . . . . . . . .0095, 0099
HEADQUARTER . . . . . . . . . . .0073
H
ITACHI . . . . . . . . . . . . . . . .0069, 0193, 0132, 0092,
. . . . . . . . . . . . . . . . . . . . .0027, 0068, 0109
H
UGHES NETWORK SYSTEMS .0069
JVC . . . . . . . . . . . . . . . . . .0094, 0035, 0233, 0234,
. . . . . . . . . . . . . . . . . . . . .0068, 0411
JENSEN . . . . . . . . . . . . . . . . .0068
KEC . . . . . . . . . . . . . . . . . .0064, 0305
KLH . . . . . . . . . . . . . . . . . .0099
KENWOOD . . . . . . . . . . . . .0068, 0094, 0411, 0065
KODAK . . . . . . . . . . . . . . . .0062, 0064
LXI . . . . . . . . . . . . . . . . . . .0064
LLOYD'S . . . . . . . . . . . . . . . .0027, 0235
LOGIK . . . . . . . . . . . . . . . . .0099
MEI . . . . . . . . . . . . . . . . . .0062
MGA . . . . . . . . . . . . . . . . .0070, 0088, 0267
MGN TECHNOLOGY . . . . . . .0267
MTC . . . . . . . . . . . . . . . . .0027, 0267
MAGNASONIC . . . . . . . . . . . .0305
MAGNAVOX
. . . . . . . . . . . . .0062, 0108, 0137, 0130,
. . . . . . . . . . . . . . . . . . . . .0027, 0066, 0176
M
AGNIN . . . . . . . . . . . . . . .0267
MARANTZ . . . . . . . . . . . . . .0108, 0062
MARTA . . . . . . . . . . . . . . . . .0064
MATSUSHITA . . . . . . . . . . . . .0062, 0189, 0481
MEMOREX . . . . . . . . . . . . . .0131, 0074, 0506, 0027,
. . . . . . . . . . . . . . . . . . . . .0064, 0075, 0062, 0073,
. . . . . . . . . . . . . . . . . . . . .0267, 0334, 0066, 0189,
. . . . . . . . . . . . . . . . . . . . .0236, 0481, 0828, 0829
MINOLTA
. . . . . . . . . . . . . . .0132, 0069
M
ITSUBISHI . . . . . . . . . . . . . .0200, 0088, 0102, 0241,
. . . . . . . . . . . . . . . . . . . . .0269, 0070, 0075, 0094,
. . . . . . . . . . . . . . . . . . . . .0470
MOTORO LA . . . . . . . . . . . . .0062, 0075
MULTITECH . . . . . . . . . . . . .0027, 0099
NAD . . . . . . . . . . . . . . . . .0085
NEC . . . . . . . . . . . . . . . . . .0065, 0067, 0068, 0077,
. . . . . . . . . . . . . . . . . . . . .0094, 0109, 0131
NIKKO . . . . . . . . . . . . . . . . .0064
NIKON . . . . . . . . . . . . . . . .0061, 0280
NOBLEX . . . . . . . . . . . . . . .0267
OLYMPUS . . . . . . . . . . . . . . .0062, 0253
OPTIMUS . . . . . . . . . . . . . . .0189, 0481, 0827, 0828,
. . . . . . . . . . . . . . . . . . . . .0075, 0085, 0829, 0064,
. . . . . . . . . . . . . . . . . . . . .0131, 0459
OPTONICA . . . . . . . . . . . . . .0089
ORION . . . . . . . . . . . . . . . .0506, 0029, 0211, 0236,
. . . . . . . . . . . . . . . . . . . . .0322
PANASONIC . . . . . . . . . . . . .0062, 0189, 0828, 0481,
. . . . . . . . . . . . . . . . . . . . .0253, 0104, 0405, 0829,
. . . . . . . . . . . . . . . . . . . . .0129, 0252, 0254, 0273,
. . . . . . . . . . . . . . . . . . . . .0827
PENNEY . . . . . . . . . . . . . . . .0062, 0267, 0064, 0069,
. . . . . . . . . . . . . . . . . . . . .0065, 0067, 0081
PENTAX . . . . . . . . . . . . . . . .0069, 0092, 0132
PHILCO . . . . . . . . . . . . . . . .0062, 0236, 0506
PHILIPS . . . . . . . . . . . . . . . . .0108, 0062, 0089, 0137,
. . . . . . . . . . . . . . . . . . . . .0830, 0831
P
ILOT . . . . . . . . . . . . . . . . .0064
P
IONEER . . . . . . . . . . . . . . .0085, 0195, 0094
P
OLK AUDIO . . . . . . . . . . . .0108
PORTLAND . . . . . . . . . . . . . .0047
P
ROFITRONIC . . . . . . . . . . . .0267
P
ROSCAN . . . . . . . . . . . . . . .0087, 0229
PROTEC . . . . . . . . . . . . . . . .0099
P
ULSAR . . . . . . . . . . . . . . . .0066, 0078
Q
UARTER . . . . . . . . . . . . . . .0073
QUARTZ . . . . . . . . . . . . . . .0073
QUASAR . . . . . . . . . . . . . . .0062, 0189, 0104, 0481,
. . . . . . . . . . . . . . . . . . . . .0828
RCA . . . . . . . . . . . . . . . . . .0087, 0176, 0229, 0069,
. . . . . . . . . . . . . . . . . . . . .0132, 0085, 0062, 0075,
. . . . . . . . . . . . . . . . . . . . .0092, 0104, 0133, 0267,
. . . . . . . . . . . . . . . . . . . . .0304
RADIO SHACK
. . . . . . . . . . .0027
R
ADIX . . . . . . . . . . . . . . . . .0064
RANDEX . . . . . . . . . . . . . . .0064
REALISTIC . . . . . . . . . . . . . . .0027, 0131, 0074, 0075,
. . . . . . . . . . . . . . . . . . . . .0064, 0062, 0089, 0073,
. . . . . . . . . . . . . . . . . . . . .0093
RICOH . . . . . . . . . . . . . . . . .0061, 0280
RUNCO . . . . . . . . . . . . . . . .0066
STS . . . . . . . . . . . . . . . . . .0069
SALORA . . . . . . . . . . . . . . . .0102
SAMSUNG . . . . . . . . . . . . . . .0072, 0078, 0080, 0267
SANKY . . . . . . . . . . . . . . . . .0066, 0075
SANSUI . . . . . . . . . . . . . . . .0068, 0506, 0027, 0094,
. . . . . . . . . . . . . . . . . . . . .0109, 0236, 0298
SANYO . . . . . . . . . . . . . . . . .0074, 0073, 0131, 0267
SCOTT . . . . . . . . . . . . . . . . .0211, 0238, 0148, 0070,
. . . . . . . . . . . . . . . . . . . . .0072, 0237, 0239
SEARS . . . . . . . . . . . . . . . . .0081, 0132, 0064, 0069,
. . . . . . . . . . . . . . . . . . . . .0027, 0062, 0073, 0074,
. . . . . . . . . . . . . . . . . . . . .0093, 0131
SEMP . . . . . . . . . . . . . . . . . .0072
SHARP . . . . . . . . . . . . . . . . .0075, 0089
SHINTOM . . . . . . . . . . . . . . .0099
SHOGUN . . . . . . . . . . . . . . .0078, 0267
SINGER . . . . . . . . . . . . . . . .0099
SONY . . . . . . . . . . . . . . . . .0060, 0061, 0059, 0280,
. . . . . . . . . . . . . . . . . . . . .0027, 0038, 0062
SUNPAK . . . . . . . . . . . . . . . .0280
SYLVANIA . . . . . . . . . . . . . . .0062, 0108, 0027, 0070,
. . . . . . . . . . . . . . . . . . . . .0130, 0137
SYMPHONIC . . . . . . . . . . . . .0027
TMK . . . . . . . . . . . . . . . . .0063, 0235, 0267
TATUNG . . . . . . . . . . . . . . . .0068
TEAC . . . . . . . . . . . . . . . . . .0027, 0068
TECHNICS . . . . . . . . . . . . . .0062, 0189, 0273
TEKNIKA . . . . . . . . . . . . . . .0027, 0062, 0064, 0079
THOMAS . . . . . . . . . . . . . . .0027
TOSHIBA . . . . . . . . . . . . . . .0072, 0237, 0239, 0070,
. . . . . . . . . . . . . . . . . . . . .0093, 0393
TOTEVISION . . . . . . . . . . . . .0064, 0267
UNITECH . . . . . . . . . . . . . . .0267
VECTOR . . . . . . . . . . . . . . . .0072
VECTOR RESEARCH . . . . . . . .0065, 0067
VIDEO CONCEPTS . . . . . . . . .0067, 0072, 0088, 0248
VIDEOSONIC . . . . . . . . . . . . .0267
W
ARDS . . . . . . . . . . . . . . . .0062, 0087, 0089, 0027,
. . . . . . . . . . . . . . . . . . . . .0074, 0239, 0267, 0069,
. . . . . . . . . . . . . . . . . . . . .0075, 0099, 0108, 0176
W
HITE WESTINGHOUSE . . . . .0099, 0305, 0236
XR-1000 . . . . . . . . . . . . . .0099, 0027, 0062
YAMAHA . . . . . . . . . . . . . . .0065
ZENITH . . . . . . . . . . . . . . . .0066, 0027, 0060, 0061,
. . . . . . . . . . . . . . . . . . . . .0236, 0506
TV
VCR
ACTIVE
SWAP PIP CH
CONTROL
DN
UP
SOUND
POWER
ACC
FREEZE
PICTURE
LASER-DISC PLAYER
22
DIRECT-ENTRY
CODES FOR A/V ACCESSORY DEVICES
Using the Remote Control
CABLE CONVERTER BOX
SATELLITE RECEIVER/DIGITAL SATELLITE SYSTEM
CODE NUMBER
ABC . . . . . . . . . . . . . . . . . .0030, 0028, 0034, 0035,
. . . . . . . . . . . . . . . . . . . . .0038, 0040, 0041, 0044,
. . . . . . . . . . . . . . . . . . . . .0060
ALLEGRO . . . . . . . . . . . . . . .0180, 0342
ANTRONIX . . . . . . . . . . . . . .0049, 0234
APACHE . . . . . . . . . . . . . . . .0797
ARCHER . . . . . . . . . . . . . . . .0049, 0066, 0180, 0234,
. . . . . . . . . . . . . . . . . . . . .0824
BBT . . . . . . . . . . . . . . . . . .0294
BELCOR . . . . . . . . . . . . . . . .0083
BELL & HOWELL . . . . . . . . . .0041
CABLE STAR . . . . . . . . . . . . .0083
CABLETENNA . . . . . . . . . . . .0049
CABLEVIEW . . . . . . . . . . . . .0049
CENTURY
. . . . . . . . . . . . . . .0180
C
ITIZEN . . . . . . . . . . . . . . . .0180, 0342
COLOUR VOICE . . . . . . . . . .0052, 0058
COMBAND
. . . . . . . . . . . . . .0259
C
OMTRONICS . . . . . . . . . . . .0067, 0087
CONTEC . . . . . . . . . . . . . . .0046
DIGI
. . . . . . . . . . . . . . . . . .0664
E
ASTERN . . . . . . . . . . . . . . .0029
EMERSON . . . . . . . . . . . . . . .0824
EVERQUEST . . . . . . . . . . . . . .0042, 0067
FOCUS . . . . . . . . . . . . . . . . .0427
GC ELECTRONICS . . . . . . . . .0083, 0234
GE . . . . . . . . . . . . . . . . . . .0259
GARRARD . . . . . . . . . . . . . .0180
GEMINI . . . . . . . . . . . . . . . .0042, 0097, 0269, 0824
GENERAL INSTRUMENT . . . . . .0303, 0038, 0503, 0837
GOLDSTAR . . . . . . . . . . . . . .0067, 0171
GOODMIND . . . . . . . . . . . . .0797, 0824
HAMLIN . . . . . . . . . . . . . . . .0047, 0036, 0286, 0061,
. . . . . . . . . . . . . . . . . . . . .0300
HITACHI
. . . . . . . . . . . . . . . .0038
H
YTEX . . . . . . . . . . . . . . . . .0034
JASCO . . . . . . . . . . . . . . . . .0042, 0180, 0342
JERROLD . . . . . . . . . . . . . . . .0030, 0039, 0303, 0041,
. . . . . . . . . . . . . . . . . . . . .0503, 0038, 0051, 0042,
. . . . . . . . . . . . . . . . . . . . .0837
LINSAY . . . . . . . . . . . . . . . . .0467
MACOM . . . . . . . . . . . . . . . .0060
MAGNAVOX . . . . . . . . . . . . .0054
MEMOREX . . . . . . . . . . . . . .0027
MOVIE TIME . . . . . . . . . . . . .0090, 0183
NSC . . . . . . . . . . . . . . . . . .0183, 0090, 0097
NEXUS . . . . . . . . . . . . . . . .0797
NOVAPLEX
. . . . . . . . . . . . . .0645
O
AK . . . . . . . . . . . . . . . . . .0046, 0034
OPTIMUS . . . . . . . . . . . . . . .0048
PANASONIC
. . . . . . . . . . . . .0048, 0134, 0027
P
ANTHER . . . . . . . . . . . . . . .0664
PARAGON . . . . . . . . . . . . . .0027
PHILIPS
. . . . . . . . . . . . . . . . .0052, 0058, 0269, 0317,
. . . . . . . . . . . . . . . . . . . . .0054, 0180
P
IONEER . . . . . . . . . . . . . . .0171, 0050, 0560
POPULAR MECHANICS . . . . . .0427
PRELUDE . . . . . . . . . . . . . . .0797
PULSAR . . . . . . . . . . . . . . . .0027
QUASAR . . . . . . . . . . . . . . .0027
RCA . . . . . . . . . . . . . . . . . .0048
RADIO SHACK . . . . . . . . . . .0042, 0847, 0342, 0824
REALISTIC . . . . . . . . . . . . . . .0234
RECOTON . . . . . . . . . . . . . .0427
REGAL . . . . . . . . . . . . . . . . .0300, 0047, 0286
REGENCY . . . . . . . . . . . . . . .0029
REMBRANDT . . . . . . . . . . . . .0038, 0097
RUNCO . . . . . . . . . . . . . . . .0027
SL MARX . . . . . . . . . . . . . . .0067
SAMSUNG . . . . . . . . . . . . . . .0067, 0171
SCIENTIFIC ATLANTA
. . . . . . .0035, 0044, 0033, 0504
S
EAM . . . . . . . . . . . . . . . . . .0537
SIGNAL . . . . . . . . . . . . . . . .0042, 0067
SIGNATURE . . . . . . . . . . . . . .0038
SPRUCER . . . . . . . . . . . . . . .0048
STAR SIGHT . . . . . . . . . . . . . .0569, 0449
STARCOM . . . . . . . . . . . . . . .0030, 0042
STARGATE . . . . . . . . . . . . . . .0067, 0042, 0797, 0824
STARQUEST . . . . . . . . . . . . . .0042
SYLVANIA . . . . . . . . . . . . . . .0028
TFC . . . . . . . . . . . . . . . . . .0337
TV86 . . . . . . . . . . . . . . . . .0090
TANDY . . . . . . . . . . . . . . . . .0285
TELE
CAPTION . . . . . . . . . . . .0248
T
ELEVIEW . . . . . . . . . . . . . . .0067
TEXSCAN . . . . . . . . . . . . . . .0028
TIMELESS
. . . . . . . . . . . . . . .0445
T
OCOM . . . . . . . . . . . . . . . .0039, 0040
TOSHIBA . . . . . . . . . . . . . . .0027
TUSA . . . . . . . . . . . . . . . . . .0042
UNIKA . . . . . . . . . . . . . . . . .0180, 0234, 0049
UNITED ARTISTS . . . . . . . . . .0034
UNIVERSAL . . . . . . . . . . . . . .0234, 0049, 0066, 0083,
. . . . . . . . . . . . . . . . . . . . .0180, 0218
VIEWMASTER . . . . . . . . . . . . .0847
VIEWSTAR . . . . . . . . . . . . . .0285, 0054, 0087, 0090
ZENITH . . . . . . . . . . . . . . . .0027, 0552, 0081
ZENTEK . . . . . . . . . . . . . . . .0427
CODE NUMBER
ADS . . . . . . . . . . . . . . . . . .0880
AIWA . . . . . . . . . . . . . . . . .0855
CARVER . . . . . . . . . . . . . . . .0853, 0850, 0858
DENON . . . . . . . . . . . . . . . .0851, 0849, 0875
DISCO VISION . . . . . . . . . . . .0848
FUNAI . . . . . . . . . . . . . . . . .0855
HARMAN/KARDON . . . . . . . .0853
HITACHI . . . . . . . . . . . . . . . .0848
KENWOOD . . . . . . . . . . . . .0877
MAGNAVOX
. . . . . . . . . . . . .0853, 0857, 0875
M
ARANTZ . . . . . . . . . . . . . .0853, 0850
MITSUBISHI . . . . . . . . . . . . . .0849
NAD . . . . . . . . . . . . . . . . .0849
NEC . . . . . . . . . . . . . . . . . .0879
NIKKODO . . . . . . . . . . . . . .0884
OPTIMUS . . . . . . . . . . . . . . .0849
PANASONIC . . . . . . . . . . . . .0856
PHILIPS . . . . . . . . . . . . . . . . .0853, 0850
PIONEER . . . . . . . . . . . . . . .0849, 0848
POLK AUDIO . . . . . . . . . . . .0853
QUASAR . . . . . . . . . . . . . . .0856
RCA . . . . . . . . . . . . . . . . . .0881, 0874
REALISTIC . . . . . . . . . . . . . . .0855
SAMSUNG . . . . . . . . . . . . . . .0858
SEGA . . . . . . . . . . . . . . . . . .0848
SHARP . . . . . . . . . . . . . . . . .0873
SONY . . . . . . . . . . . . . . . . .0854, 0852, 0878
TECHNICS . . . . . . . . . . . . . .0856
THETA DIGITAL
. . . . . . . . . . .0853
V
ICTOR . . . . . . . . . . . . . . . .0876
YAMAHA . . . . . . . . . . . . . . .0857
CODE NUMBER
ALPHASTAR . . . . . . . . . . . . .0799
A
MPLICA . . . . . . . . . . . . . . .0099
A
MWAY . . . . . . . . . . . . . . . .0070, 0102
A
RUNTA . . . . . . . . . . . . . . .0548
ASTRO INDUSTRIES . . . . . . . .0122
BMC . . . . . . . . . . . . . . . . .0114
BSR . . . . . . . . . . . . . . . . . .0122
CABLE INNOVATIONS . . . . . . .0581
C
APETRONIC . . . . . . . . . . . .0122
C
ENTURY . . . . . . . . . . . . . . .0565
CHANNEL MASTER . . . . . . . .0045, 0239
C
HAPARRAL . . . . . . . . . . . . .0080, 0236, 0243
C
ITOH . . . . . . . . . . . . . . . . .0191
CONIFER . . . . . . . . . . . . . . .0031
C
URTIS MATHES . . . . . . . . . .0088, 0099
DX A
NTENNA . . . . . . . . . . .0068
DRAKE . . . . . . . . . . . . . . . .0091, 0272, 0045, 0176
E
CHOSTAR . . . . . . . . . . . . . .0307, 0802, 0175, 0186,
. . . . . . . . . . . . . . . . . . . . .0296
E
XPRESSVU . . . . . . . . . . . . . .0802
GE . . . . . . . . . . . . . . . . . . .0593
G
ENERAL INSTRUMENT . . . . . .0388, 0896, 0574, 0581,
. . . . . . . . . . . . . . . . . . . . .0654
G
OULD . . . . . . . . . . . . . . . .0082
HNS . . . . . . . . . . . . . . . . . .0644
HTS . . . . . . . . . . . . . . . . . .0802
HITACHI . . . . . . . . . . . . . . . .0846
H
OMECABLE . . . . . . . . . . . . .0265
HUGHES NETWORK SYSTEMS .0776 H
YTEK . . . . . . . . . . . . . . . . .0122
IQ . . . . . . . . . . . . . . . . . . .0237
IQ P
RISM . . . . . . . . . . . . . . .0237
I
NTERSAT . . . . . . . . . . . . . . .0070
JVC . . . . . . . . . . . . . . . . . .0802
J
ANEIL . . . . . . . . . . . . . . . . .0179
J
ERROLD . . . . . . . . . . . . . . . .0388, 0654
L
EGEND . . . . . . . . . . . . . . . .0296
MACOM . . . . . . . . . . . . . . . .0088, 0045
M
AGNAVOX . . . . . . . . . . . . .0749, 0751
M
EMOREX . . . . . . . . . . . . . .0296, 0751
NEXT LEVEL . . . . . . . . . . . . .0896
NORSAT . . . . . . . . . . . . . . . .0031
P
ANASONIC . . . . . . . . . . . . .0179, 0728
P
HILIPS . . . . . . . . . . . . . . . . .0227, 0749, 0751
P
ICO . . . . . . . . . . . . . . . . . .0102
P
RIMESTAR . . . . . . . . . . . . . .0654, 0388
RCA . . . . . . . . . . . . . . . . . .0593, 0170, 0882
R
ADIO SHACK . . . . . . . . . . .0581, 0896
R
AMSEY . . . . . . . . . . . . . . . .0102
REALISTIC . . . . . . . . . . . . . . .0079, 0078
STS . . . . . . . . . . . . . . . . . .0237, 0068
SONY . . . . . . . . . . . . . . . . .0666
STAR CHOICE . . . . . . . . . . . .0896
S
TAR TRAK . . . . . . . . . . . . . .0207, 0448, 0574
S
TRONG . . . . . . . . . . . . . . . .0448
TOSHIBA . . . . . . . . . . . . . . .0109, 0776, 0817, 0088
T
OWN & COUNTRY . . . . . . .0574
U
NIDEN . . . . . . . . . . . . . . . .0265, 0079, 0101, 0397,
. . . . . . . . . . . . . . . . . . . . .0581, 0751, 0103, 0323,
. . . . . . . . . . . . . . . . . . . . .0749
ZENITH . . . . . . . . . . . . . . . .0091, 0883, 0088
TELEVISION
CODE NUMBER
MAGNAVOX . . . . . . . . . . . . .0583
POWER
ACC
TV
VCR
ACTIVE
SWAP PIP CH
FREEZE
CONTROL
DN
UP
PICTURE
SOUND
Loading...
+ 50 hidden pages