Philips 55PUS7906/73, 50PUS7906/73, 65PUS7906/73 user manual

7906 Series
User Manual
50PUS7906
55PUS7906
65PUS7906
Register your product and get support at
www.philips.com/TVsupport

Contents

1.1 Home Screen and Channels
1.2 Open the Home Screen
1.3 Home Screen Update
4 4 4
2 Setting Up 6
2.1 Read Safety
2.2 TV Stand and Wall Mounting
2.3 Tips on Placement
2.4 Power Cable
2.5 Antenna Cable
2.6 Satellite Dish
6 6 6 6 7 7
3 Remote Control 8
3.1 Key Overview
3.2 Pair Your Remote Control to TV
3.3 Voice Search
3.4 IR Sensor
3.5 Batteries
3.6 Cleaning
8 9 9 9 10 10
4 Switching On and Off 11 5 Channel Installation 12
5.1 First Time to Install Channels
5.2 Install Digital or Analogue Channels
5.3 Satellite
5.4 Antenna
5.5 Cable Installation
5.6 Channel Installation Options
5.7 Update Channels
12 12 12 13 14 14 15
6 Channels 17
6.1 About Channels and Switch Channels
6.2 Channel Lists
6.3 Watching channels
6.4 Favourite Channels
6.5 Interactive TV
17 17 18 19 20
7 Connect Devices 21
7.1 About Connections
7.2 Home Theatre System - HTS
7.3 Video Device
7.4 Audio Device
7.5 USB Hard Drive
7.6 USB Flash Drive
7.7 Computer
21 22 22 22 23 24 24
8 Bluetooth 25
8.1 What You Need
8.2 Pairing a Device
8.3 Select a Device
8.4 Rename a Device
8.5 Remove a Device
25 25 25 25 25
9 Connect your Android TV 27
9.1 Network and Internet
27
9.2 Google Account
28
10 Apps 29
10.1 About Apps
10.2 Google Play
10.3 Start or Stop an App
10.4 Manage Apps
29 29 30 30
11 Sources 31
11.1 Switch to a device
31
12 Settings 32
12.1 Picture Settings
12.2 Sound Settings
12.3 Power Settings
12.4 Advanced Options
12.5 Other settings
12.6 Reboot
12.7 Factory Reset
12.8 Clock and Language Settings
12.9 Accessibility Settings
32 33 34 34 35 36 36 36 37
13 Ambilight 39
13.1 Ambilight Style
13.2 Custom colour
13.3 Brightness and Saturation
13.4 Wall Colour Behind the TV
13.5 TV Switch Off
39 39 39 39 39
14 Videos, Photos, Music & Text 40
14.1 From a USB Connection
14.2 Play your Videos
14.3 View your Photos
14.4 Play your Music
14.5 View your Text
40 40 40 41 41
15 TV Guide 42
15.1 TV Guide Data
15.2 Using the TV Guide
42 42
16 Recording and Time Shift 43
16.1 Record Options
16.2 Recording
16.3 Time Shift
43 43 44
17 Smartphones and Tablets 45
17.1 Google Cast
45
18 Netflix 46 19 Software 47
19.1 Update Software
19.2 Software Version
19.3 Open Source Licenses
47 47 47
20 Specifications 48
20.1 Environmental
20.2 Power
20.3 Operating System
20.4 Reception
48 48 48 48
2
20.5 Wi-Fi and Bluetooth Module
20.6 Display Type
20.7 Display Input Resolution
20.8 Connectivity
20.9 Sound
20.10 Multimedia
48 49 49 49 49 49
21 Help and Support 50
21.1 Register your TV
21.2 Troubleshooting
21.3 Online Help
21.4 Support and Repair
50 50 52 52
22 Safety and Care 53
22.1 Safety
22.2 Screen Care
53 54
23 Terms of Use 55 24 Copyrights 56
24.1 HDMI
24.2 Dolby Vision and Dolby Atmos
24.3 DTS-HD
24.4 Wi-Fi Alliance
24.5 Kensington
24.6 Other Trademarks
25 Disclaimer regarding services
56 56 56 56 56 56
57
and/or software offered by third parties Index 58
3
1

Home Screen

This channel contains your Recommended, Subscriptions or Trending YouTube videos.
Customize channels
1.1

Home Screen and Channels

The Home launcher
To enjoy the benefits of your Android TV, connect the TV to the Internet. Press Home on your remote control to get your new Android Home screen. Like on your Android smartphone or tablet, the Home screen is the centre of your TV. From here you can decide what to watch by browsing entertainment options from app and live TV. Your Home has channels to let you discover great contents from your favourite apps. You can also add additional channels or find new apps to get more contents.
The Home screen is organized in channels. Apps may populate their recommendation (if available) according to their own choice as an individual channels in the home screen.
Apps
Your favourite Apps are placed on the first row. This row contains number of apps pre-installed. The order of these apps are according to business agreements with content service providers. You can also add more apps as favourite from the Apps page, such as the Live TV and MMP (MultiMediaPlayer). The Apps page can be opened by clicking the Apps icon at the left end of the Apps row.
Live TV
The Live TV row shows the currently running programmes from the installed channels. It contains up to 10 channels as the recommendation for you to select the TV channels. The first channel on Live TV row is the channel you are watching, and the following channels will be the channels on your favourite list*. * Note: If there are still more spaces available on Live TV row, it will include the channels from your DTV (digital TV) source.
Play Next channel You can always know what to watch next from Play
Next channel on the Home screen. Start watching
from where you left off and get notifications about new episodes in the Play Next channel. Press and hold Select on a movie or TV show to add it directly to the Play Next channel.
Google Play Movies & TV channel
Rent movies or TV shows on this channel from Google Play Movies & TV.
Click the Customize channels button to add and remove channels from your Home screen.
See also www.support.google.com/androidtv
Accessing settings from Home
You can access Settings menu via the icon at the top right corner.
Accessing USB flash drive from Home
To view the files from the USB flash drive, you need to add the MMP (MultiMediaPlayer) app to the Home page first. Press Home, clicking the Apps icon at the left end of the Apps row. You can add MMP apps from the Apps page.
System bar on Home screen
The System bar on the top of Home screen contains following features.
- Search button: to trigger Google search with voice* or text input. The search result and its order are rendered according to business agreements with content service providers.
- Notifications: to provide you the messages about your Smart TV system.
- Input source: to launch the input source list and switch to any of the connected devices.
- Settings: to access all setting menu and adjust the TV settings.
- Clock: to indicate the system clock. * Note: In order to take advantage of Google Assistant
in case of a remote control without microphone, please use the Android TV Remote Control app available in Google Play Store for Android and Apple App store for iOS devices.
1.2

Open the Home Screen

To open the Home screen and open an item…
1 - Press Home. 2 - Select an item and press OK to open or start it. 3 - Press Back continuously or press Home can
go back to Home screen. When opening the Home screen, the background
application/content playback will stop. You have to select the application or content from the Home screen to resume.
YouTube channel
4
1.3
Home Screen Update
You may receive the update notification from Google and have new version of Home launcher installed. With the new Home launcher, you will have a new look and features on TV’s Home screen.
New highlights on your home screen With multiple tabs like Home, Discover, Apps and
Search, you can discover movies and shows from
your services and popular apps. Sign in to your Google Account to get personalised recommendations from your streaming services based on what you have watched and what interests you.
New look, new navigation
Decide what to watch next with easy-to-use navigation. Browse your personalised recommendations, pick up where you left off, or quickly find a certain app using the new tab system.
Discover personalised recommendations
Browse shows and movies that you will love on all your favourite media services. Sign in to your Google Account to get started.
Get recommendations across Google
Your services are saved to your Google Account so you can get better recommendations across Google.
5
2

Setting Up

2.1

Read Safety

Read the safety instructions first before you use the TV.
To read the safety instructions, go to Safety and Care section on this Help manual for the information.
2.2

TV Stand and Wall Mounting

TV Stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com/TVsupport.
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
2.3

Tips on Placement

• Position the TV where light does not shine directly on the screen.
• Dim lighting conditions in the room for best Ambilight effect.
• The ideal distance to watch TV is 2 to 5 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.
• When wall mounted, position the TV up to 15 cm away from the wall.
Use the model number of the TV to look for the Quick Start Guide to download.
Wall Mounting
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
• 43PUS79x6
VESA MIS-F 100x200, M6 (Min.: 10mm, Max.: 12mm)
• 50PUS79x6
VESA MIS-F 200x300, M6 (Min.: 10mm, Max.: 16mm)
• 55PUS79x6
VESA MIS-F 200x300, M6 (Min.: 10mm, Max.: 16mm)
• 65PUS79x6
VESA MIS-F 300x300, M6 (Min.: 12mm, Max.: 20mm)
• 70PUS79x6
VESA MIS-F 300x300, M8 (Min.: 12mm, Max.: 25mm)
• 75PUS79x6
VESA MIS-F 300x300, M8 (Min.: 12mm, Max.: 25mm) Caution
Note:
Please keep the TV away from dust-producing sources such as stoves. It is suggested to clean the dust regularly to avoid getting dust into the TV.
2.4

Power Cable

• Insert the power cable into the POWER connector on the back of the TV.
• Make sure the power cable is securely inserted in the connector.
• Make sure that the power plug, in the wall socket, is accessible at all times.
• When you unplug the power cable, always pull the plug, never pull the cable
6
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
2.5

Antenna Cable

Insert the antenna plug firmly into the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for antenna digital or analogue input signals.
2.6

Satellite Dish

Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
7
3

Remote Control

3.1

Key Overview

Top
Middle
1 - OK key
To confirm a selection or setting. To open the channel list while watching TV.
1 - Power (Standby / On) To switch the TV on or back to Standby.
2 - VOICE microphone 3 - Ambilight
To select one of the Ambilight style. 4 - Amazon Prime Video
To launch the Amazon Prime Video App. 5 - NETFLIX
To launch the Netflix App with the TV switched on or from standby.
• If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet.
• To open Netflix, press the NETFLIX key to open the Netflix App. You can open Netflix immediately from a TV in standby.
6 - MENU To open the TV Menu with typical TV functions.
7 - Google Play To launch the Google Play App.
8 - YouTube To launch the YouTube App.
2 - Back
• To return to previous menu or TV source.
• To go back to the previous App. 3 - Playback and Record
Play, to playback.
Pause, to pause playback
Stop, to stop playback
Rewind, to rewind
Fast forward, to go fast forward
Record, to start recording 4 - Colour keys
Follow the on-screen instructions to select more options or operations. Press Blue key on Home screen to open the Help.
5 - Navigation keys To navigate up, down, left or right.
6 - Home To open the Home menu.
7 - TV GUIDE To open or close the TV Guide.
Bottom
9 - SOURCES / PAIR
• To open or close the Sources menu.
• To pair the remote control to the TV. 10 - Google Assistant™
To launch the Google Assistant™.
8
control starts blinking. 2 - The remote control must be kept close to the TV (within 1m distance) during pairing in order to ensure success. 3 - If the TV does not launch the voice control field when press Google Assistant™, pairing was unsuccessful. 4 - It is advisable to wait until the set has fully started up and launched all background processes before pairing mode is entered as the toast message containing further instructions may appear too late, thereby negatively impacting the pairing procedure.
Pairing again
1 - EXIT
To leave from current menu or App. 2 - Volume
Press + or - to adjust the volume level. 3 - Number keys
To select a channel directly.
4 - AD / INFO AD - To access the Audio Description and toggle to
switch on and off. INFO - Long press to open the programme information screen.
5 - Channel Press + or - to switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext.
6 - Mute Press to mute the sound or to restore it.
7 - SUBTITLE To open Subtitle page.
3.2

Pair Your Remote Control to TV

This remote control uses both Bluetooth and IR (infrared) to send its commands to the TV.
If the pairing with the remote control was lost, you can pair the TV with the remote control again. Press the PAIR key until you see the light pulsing on the remote for pairing.
Unpair
Press and hold 0 and Mute key on the remote control until you see the light pulsing on the remote.
3.3

Voice Search

You can search for videos, music or anything else on the Internet by simply using your voice. You can speak into the microphone on the remote control.
You need to pair the remote control to the TV before use voice search.
To use Voice... 1 - Press Google Assistant™ on remote control, the
blue light on the remote control lights up and the search field opens, the microphone is active. 2 - Speak out what you are looking for with clear pronunciation. You can speak for 10 seconds before the microphone switches off. It might take some time for the results to appear. 3 - In the list of search results, you can select the item you want.
• You can use this remote control via IR (infrared) for most operations.
• To use advanced operation like voice search and remote control keyboard, you need to pair (link) the TV with the remote control.
When you start the initial TV installation, the TV invites you to long press the PAIR key until you see the light pulsing on the remote. By doing so, the pairing will be done.
Note:
1 - Once the remote control has entered pairing mode successfully, the blue LED indicator ring around the microphone on the front side of the remote
3.4

IR Sensor

The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
9
Warning
Do not put any objects in front of IR sensor of the TV, it may block the IR signal.
3.5

Batteries

If the TV does not react on a key press on the remote control, the batteries might be empty.
To replace the batteries, open the battery compartment on the back-bottom of the remote control.
1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.
For more information, in Help, select Keywords and look up End of use.
3.6

Cleaning

Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
10
4

Switching On and Off

Make sure the TV is connected to the mains AC power. The indicator light at the bottom of the TV lights up.
Switch on
Press Power on the remote control to switch the TV on. You can also press the small joystick key on the bottom of the TV to switch the TV on in case you can't find the remote control or its batteries are empty.
Switch to standby
To switch the TV to standby, press Power on the remote control. You can also press the small joystick key on the bottom of the TV.
In standby mode, the TV is still connected to the mains power but consumes very little energy.
To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
11
5
5.3

Channel Installation

5.1

First Time to Install Channels

Install channels during the first TV installation
On the first TV installation, you can follow on-screen instructions to set the menu language, network connection, sign in Google account, select your country and complete other basic settings for the TV. Moreover, you can also install channels during the first TV installation.
To install channels during the first TV installation… 1 - The first TV installation starts from Welcome
screen with language setting options, follow on­screen instruction to complete multiple TV settings until the channel installation part. 2 - The channel installation during the first TV installation starts from* Satellite installation, press
Start if you want to install satellite channels. Press Skip to skip the satellite installation and go to Antenna or Cable installation page.
3 - Follow on-screen instructions to complete one of the channel installation types as your selection. You can install other types of channel installation later on MENU > TV options > Settings > Channel.
* Note: The sequence of channel installation types may be different depending on the country setting you just selected. The Antenna and Cable installation could be the priority options. In this case, the Satellite installation will be available after the Skip is selected.
For more details about Satellite, Antenna and Cable channel installation, please refer to respective installation instruction sections.
5.2

Install Digital or Analogue Channels

When scan and install channels, only current TV source channels will be scanned. If you current TV source is DTV, the channel scan applied to digital channels. If you current TV source is ATV, the channel scan applied to analogue channels.
To set or change TV source, press SOURCES and select DTV or ATV.

Satellite

Satellite Installation
Please note that before installing channels, you should first change the Channel Installation Mode to the one you want to install. For the Satellite channel installation, you need to change Channel Installation Mode to General Satellite or Preferred Satellite first and then start the installation.
To install Satellite channels…
1 - Press Home > Settings > Channel > Channel Installation Mode and press OK.
2 - Select General Satellite or Preferred Satellite and then go back to Channel.
3 - Select Channels > Satellite re-scan or Satellite Manual Tuning and press OK.
Alternatively, while watching a TV channel, you can perform the channel scan by...
MENU > Navigation Keys up > Channels > Channel
Satellite Re-scan and Satellite Manual Tuning
Scan channels with Satellite re-scan
To start Satellite re-scan…
1 - Press Home > Settings > Channel > Channel Installation Mode and press OK.
2 - Select General Satellite or Preferred Satellite and then go back to Channel. 3 - Select Channels > Satellite re-scan and press OK. 4 - Select Next to proceed the scan or select More to find more scan types for different satellite systems. Depending on your satellite system, there are 5 types of Satellite scan modes to select.
Single - Scan the channels from single satellite.
Tone Burst - Scan the channels from up to 2 satellites.
DiSEqC 1.0 - Scan the channels from up to 4 satellites.
Unicable I - Scan the channels from up to 2 satellites with up to 8 User Band Number.
Unicable II - Scan the channels from up to 4 satellites with up to 32 User Band Number. 5 - Select Next to start the scan immediately with current satellite settings.
12
6 - Select the Satellite name to view and change the satellite settings. Once the satellite settings are confirmed, press Back and select Next to start the scan.
The satellite setting items include all information of satellites.
Satellite Status - The item is not allowed to modify when you select Preferred satellite, but allowed in General satellite. Press Navigation keys left or right to set the Status on or off of the selected satellite.
Satellite selection - The item is only for indicating the name of satellite, not allowed to modify.
Scan mode - Press Navigation keys left or right to set the scan mode to Full or Network .
Scan type - Press Navigation keys left or right to set the scan type to All, Only Encrypted Channels or Only Free Channels.
Store type - Press Navigation keys left or right to set the store type to All, Only Digital Channels or Only Radio Channels.
LNB configurations - Press OK to view or adjust the LNB configurations for the LNB Power, LNB
Frequency, Tone 22KHz, Signal quality and Signal level.
Transponder - Press OK to adjust the Transponder settings for the Frequency, Symbol Rate and Polarization.
Signal quality - View the signal quality of the satellite displayed by the value between 0 and 100.
Signal level - View the signal level of the satellite displayed by the value between 0 and 100.
User Band Number
In a Unicable system, each connected satellite tuner must be numbered (e.g. 0, 1, 2 or 3 etc.).
You can find the available user bands and their number on the Unicable switchbox. User band is sometimes shortened as UB. If you select Unicable in the settings, the TV will ask you to assign the unique user band number for each built-in satellite tuners. A satellite tuner cannot have the same user band number as another satellite tuner in the Unicable system.
User Band Frequency
Next to the unique user band number, the built-in satellite receiver needs the frequency of the selected user band number. These frequencies are mostly shown next to the user band number on a Unicable switchbox.
Satellite CAM
If you use a CAM (CI+) – a Conditional Access Module with a smart card – to watch satellite channels, we recommend to do the satellite installation with the CAM inserted in the TV.
Most CAMs are used to descramble channels.
Scan channels with Satellite manual tuning
Satellite Manual Tuning is used to scan only one satellite by setting the Transponder of selected satellite. In this condition of scanning, only Transponder adjustment is allowed, other setting items are disabled.
Unicable Setup
The Unicable System
You can use a Single Cable system or Unicable system to connect the antenna dish to the TV. A Single Cable system uses one cable to connect the satellite dish to all satellite tuners in its system. A Single Cable system is typically used in apartment buildings. If you use a Unicable system, the TV will ask you to assign a user band number and corresponding frequency during the installation.
If you notice some missing channels after a Unicable installation, another installation might have been done at the same moment on the Unicable system. Do the installation again to install the missing channels.
Newest generation CAMs can install all the satellite channels by themselves on your TV. The CAM will invite you to install its satellite(s) and channels. These CAMs not only install and descramble the channels but also handle regular channel updates.
To open the CAM (CI+) menu... Press MENU > TV options > CI Card and press OK.
5.4

Antenna

Antenna Installation
Please note that before installing channels, you should first change the Channel Installation Mode to the one you want to install. For the Antenna channel installation, you need to change Channel Installation Mode to Antenna first and then start the installation.
To install Antenna channels…
1 - Press Home > Settings > Channel > Channel Installation Mode and press OK. 2 - Select Antenna and then go back to Channel.
13
3 - Select Channels > Channel Scan and press OK.
Channel
Alternatively, while watching a TV channel, you can perform the channel scan by...
MENU > Navigation Keys up > Channels > Channel
Favourite Network Select
To select the favourite network...
1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK.
2 - Select Favourite Network Select and press OK. 3 - Follow the on-screen instructions. 4 - Press Back, repeatedly if necessary, to close the
menu.
5.5

Cable Installation

Please note that before installing channels, you should first change the Channel Installation Mode to the one you want to install. For the Cable channel installation, you need to change Channel Installation Mode to Cable first and then start the installation.
To install Cable channels…
1 - Press Home > Settings > Channel > Channel Installation Mode and press OK.
2 - Select Cable and then go back to Channel. 3 - Select Channels > Channel Scan and
press OK. 4 - Press Navigation keys left or right to select a scan mode.
Full scan
1 - Select Full. 2 - Select Scan and press OK to start. This can
take a few minutes.
Quick or Advance scan
1 - Select Quick or Advance. 2 - You can set the Frequency (KHz) and Network
ID.
3 - Select Scan and press OK to start. This can take a few minutes.
Alternatively, while watching a TV channel, you can perform the channel scan by...
MENU > Navigation Keys up > Channels >
5.6

Channel Installation Options

Single RF Scan and Reception Quality
You can check the quality and signal strength of a digital channel. If you have your own antenna, you can reposition the antenna to try and improve the reception.
To check the reception quality of a digital channel… 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels > Single RF Scan and press OK.
2 - Select RF Channel. 3 - Press Navigation keys left or right to select a
channel and press OK. The signal level and signal quality is shown for this channel. 4 - Press Back, repeatedly if necessary, to close the menu.
Channel Scan or Store Type
You can set the channel type for scanned or stored.
To set the channel scan type... 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK.
2 - Select Channel Scan Type and press OK. 3 - Select the scan type you want and press OK. 4 - Press Back, repeatedly if necessary, to close the
menu.
To set the channel store type... 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK.
2 - Select Channel Store Type and press OK. 3 - Select the store type you want and press OK. 4 - Press Back, repeatedly if necessary, to close the
menu.
Channel Skip
You can skip the channels you do not want to watch.
To set the skipped channels ... 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK.
2 - Select Channel Skip* and press OK. 3 - Select the channels you want to skip and
press OK. The check mark is shown. 4 - Press Back, repeatedly if necessary, to close the
14
menu. * Note: You cannot skip the current watching channel.
Channel Sort
2 - Select Channel Edit and press OK. 3 - Use the Navigation keys to select the channel
and press Yellow key for Select.
4 - Edit the channel number* and channel name. 5 - Press Back, repeatedly if necessary, to close the
menu.
You can swap the position on the channel list for each channel.
To swap the channel number... 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK.
2 - Select Channel Sort* and press OK. 3 - Press OK to select a channel, and then press
Navigation keys up or down to select another channel. The position of first selected channel and the second selected channel will be swapped to each other.
4 - Press Blue key Exit to finish the operation. 5 - Press Yellow key Go To Channel and input the
channel number to jump to the channel. 6 - Press Back, repeatedly if necessary, to close the menu.
* Note: Depending on your installation country or operator setting, Channel Sort option is not always available.
Channel Move
You can change the channels order as you like.
* Note: Depending on your installation country or operator setting, channel number editing is not always available.
Analogue Manual Scan
Analogue TV channels can be manually installed.
To install analogue channels manually… 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK. 2 - Select Analogue Manual Scan and press OK.
Analogue Channel Fine Tune
Analogue TV channels can be manually fine tuned.
To fine tune a channel... 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK.
2 - Select Analogue Channel Fine-tune and press OK.
3 - You can fine tune the channel. 4 - Press Back, repeatedly if necessary, to close the
menu.
To move channels ... 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and press OK.
2 - Select Channel Move* and press OK. 3 - Follow the on-screen description to select. 4 - Press Back, repeatedly if necessary, to close the
menu. * Note: Depending on your installation country or
operator setting, Channel Move option is not always available.
Channel Edit
You can edit the channels from the channel list.
To edit the channels ... 1 - While watching TV, press MENU > TV options > Settings > Channel > Channels and
press OK.
5.7

Update Channels

Automatic Channel Update
If you receive digital channels, you can set the TV to automatically update these channels.
Once a day, the TV updates the channels and stores new channels. The TV must be in standby to automatically update channels. You can switch off automatic update.
To switch off the automatic update… 1 - While watching TV, press MENU > TV options
> Settings > Channel.
2 - Enter your PIN code if necessary. 3 - Select Auto Channel Update and press OK. 4 - Press Back, repeatedly if necessary, to close the
menu. In certain countries, the Automatic channel update is
done while watching TV or on any moment when the
15
TV is in standby.
Channel Update Message
Once the automatic channel update is done, a notification will be displayed when TV leaving from standby mode.
To switch off the message of channel update… 1 - While watching TV, press MENU > TV options
> Settings > Channel.
2 - Enter your PIN code if necessary. 3 - Select Channel Update Message and press OK. 4 - Press Back, repeatedly if necessary, to close the
menu.
Manual Channel Update
You can always start a channel update yourself. To start a channel update manually… 1 - While watching TV, press MENU > TV options
> Settings > Channel > Channels and select one of below options. Channel Scan - this kind of scan will auto install digital channels or analogue channels depending on your current TV source setting is DTV or ATV . Update Scan - refers to an incremental scan, which only scans the frequencies that Channel Scan has not scanned. Analog Manual Scan - allow user to input analogue frequency to start manual scan. Single RF Scan - is digital manual scan, this allow user to scan specific frequency by pressing left or right Navigation Key on the RF Channel item. Manual Service Update - is used to start background scan that new channels can be scanned without changing the existing channels.
2 - Enter your PIN code if necessary. 3 - The channel scan will start immediately. This can
take a few minutes to complete the channel update. 4 - Press Back, repeatedly if necessary, to close the menu.
16
6
About Channel Lists

Channels

6.1

About Channels and Switch Channels

To watch TV channels
• Press SOURCES and select DTV to watch digital channels or ATV to watch analogue channels.
• Alternatively, you can Press Home > Live TV and press OK to watch current TV source channels. If Live TV is not on your Apps row, you can press + icon on the end of the row to add the app.
To switch TV channels
• Press Channel + or Channel - to switch channels.
• If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.
To switch to a channel from a channel list
• While watching a TV channel, press OK to open the channel lists. The channel list only includes the channels from current broadcast source like General Satellite, Preferred Satellite, Antenna or Cable .
• To view different channel list from other broadcast source, press MENU > Navigation Keys up > Channels > Channel > Channel Installation Mode and select other broadcast source you want to watch channels and view the channel list.
• The channel list can have several pages with channels. To view the next or previous page, follow the on-screen instruction.
• To close the channel lists without switching channels, press Back.
Radio channels
If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.
TV may not work properly with some operators of digital television , non-compliance with requirements of the standard in full.
6.2

Channel Lists

After a channel installation, all channels appear on the All channel list. The channels displayed in All Channel list is listed based on genre*. For example: Premium, Premium News, Premium Local, Children, Sport and etc. The Premium genre are top broadcast channels positioned with market share above 3%. Channels are shown with their name if this information is available.
With a channel list selected, press Navigation keys up or down to select a channel, then press OK to watch the selected channel.
* Note: The listed by genre function is only apply to Germany.
Radio channels
If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.
TV may not work properly with some operators of digital television , non-compliance with requirements of the standard in full.
Open a Channel List
Next to the list with all channels, you can select a filtered list or you can select one of the favourite lists you created.
To open the current channel list…
1 - While watching TV, press OK to open the current channel list. 2 - The channel list only includes the channels from current broadcast source like General Satellite, Preferred Satellite, Antenna or Cable. 3 - To view different channel list from other broadcast source, press MENU > Navigation Keys up > Channels > Channel > Channel Installation Mode and select other broadcast source you want to watch channels and view the channel list.
4 - Press Back to close the channel list.
To change the type of channel list…
1 - While watching TV, press OK to open the current channel list.
2 - Press Yellow key for Select More and then select Select Type (for example, Broadcast or Favourites) to
immediately change the channel list to your preferred list. 3 - Press Back to close the channel list.
17
Search for a Channel
You can search for a channel to find it in a long list of channels.
by pressing OK.
Parental Controls
To search for a channel…
1 - Press OK to open the current channel list. 2 - Press Yellow key for Select More. 3 - Select Operation > Find and press OK to open
a text field. You can use the remote control keyboard (if available) or the on-screen keyboard to enter text. 4 - Enter a number, a name or part of a name and press OK. The TV will search for matching channel names in the list you selected.
Search results are listed with current channel list type you have selected (for example, Broadcast or Favourites). The search will return the matching channel name with the result arranged in alphabetical order. The search results disappear once you select another channel list or close the list with search results.
Channel List Sorting
You can do channel list sorting with all channels. You can set the channel list to show only TV channels or only Radio stations. For Antenna channels you can set the list to show the Free or the Scrambled channels.
To set a filter on a list with all channels…
1 - Press OK to open the current channel list. 2 - Press Yellow key for Select More. 3 - Select Operation > Sort and press OK. 4 - Select the filter you want and press OK to
activate. The name of the filter appears as part of the channel list name on top of the channel list. 5 - Press Back to close the channel list.
6.3

Watching channels

Tune to a Channel
To start watching TV channels, press SOURCES. The TV tunes to the channel you last watched.
Alternatively, you can select Live TV from the Home screen.
Switch Channels
To switch channels, press Channel + or Channel -. If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch immediately.
You can also tune to channels from a Channel List
Lock and Unlock a Channel
To prevent children from watching a channel, you can lock a channel. To watch a locked channel, you must enter the 4 digit PIN code first. You cannot lock programmes from connected devices.
To lock or unlock a channel… 1 - Press MENU > Settings > Channel > Parental Controls and press OK.
2 - Enter your PIN code if necessary. 3 - Select Channels Blocked and press OK. 4 - Press Navigation keys up or down to select the
channel you want to lock or unlock, and press OK.
5 - A locked channel is marked with a lock icon. 6 - Press Back, repeatedly if necessary, to close the
menu.
Programme Restrictions
To prevent children from watching a programme that may not suitable for them, you can set a rating.
Digital channels can have their programmes rated. When the rating of a programme is equal to or higher than the rating you have set, the programme will be locked. To watch a locked programme, you must enter the PIN code first.
To set a rating… 1 - Press MENU > Settings > Channel > Parental Controls and press OK.
2 - Enter your PIN code if necessary. 3 - Select Programme Restrictions and press OK. 4 - Select On to set the rating. 5 - Select Ratings and press OK. 6 - Set the restrictions for your children. 7 - Press Back, repeatedly if necessary, to close the
menu. To switch off the parental rating, select None.
However, in some countries you must set a rating. For some broadcasters/operators, the TV only locks
programmes with a higher rating. The parental rating is set for all channels.
Inputs Blocked
To prevent from using connected devices, you can lock an input source. To connect a locked input source, you must enter the 4 digit PIN code first.
To lock or unlock an input source… 1 - Press MENU > Settings > Channel > Parental
18
Loading...
+ 42 hidden pages