PHILIPS 55PUS6703 User Manual [nl]

Register your product and get support at

www.philips.com/welcome

Downloaded	6703 series
from
	www
	.
	vandenborre43PUS6703
User Manual
		.
	50PUS6703	be
	55PUS6703
	65PUS6703

Contents

1 Get Support		3
1.1 Identify and Register your TV				3
1.2	TV Help and User Manual		3
1.3	On-line Help and User Manual			3
1.4	Consumer Care / Repair		3

2 Software	4
2.1 Update Software			4
2.2 Software Version			4
3 Quick Guide		5
3.1 Remote Control			5
3.2 IR sensor	6
3.3 Joysticker - Local Control				6
4 Setting Up		8
4.1 Read Safety		8
4.2 TV Placement		8
4.3 Turn on TV		8
5 Connections			10
5.1 Connectivity guide			10
5.2 Antenna	10
5.3 Satellite	10
5.4 Video Device		10
5.5 Audio Device		11
5.6 Mobile Device			11
5.7 Other Device		13
6 Switch Source			16
6.1 Source List		16
6.2 Rename Device			16
7 Channels		17
7.1 About Channels and Switch Channels					17
7.2 Install Channel			17
7.3 Channel List		22
7.4 Favourite Channels			23
7.5 Text / Teletext			24
8 TV Guide		26
8.1 What You Need			26
8.2 Using the TV Guide			26
8.3 Freeview Play		27
9 Recording and Pause TV				28
9.1 Recording	28
9.2 Pause TV	29
10 Videos, Photos and Music					30
10.1 From a USB Connection				30

10.2Photos 30

10.3Videos 30

10.4 Music

31

11 Open TV Setting Menus		32
11.1 Home Menu Overview 32
11.2	Frequent settings and All settings	32
11.3	All Settings 32

12 Network		41
12.1 Home Network		41
12.2	Connect to Network		41
12.3	Network Settings		42
13 Smart TV		44

		Downloaded
13.1 Setup Smart TV			44		from
					www
13.2 Smart TV Start Page			44
13.3 App Gallery		44
15.1 Ambilight Style		46					.
							vandenborre
14 TV on Demand / Video on Demand
45
15 Ambilight		46
15.2 Ambilight Brightness, Saturation					46		.
							be
15.3 Ambilight+hue		46
15.4 Advanced Ambilight Settings					48
16 Netflix	49
17 Environmental			50
17.1 European Energy Label				50
17.2 End of Use		50
18 Specifications			51
18.1 Power	51
18.2 Reception		51
18.3 Display Resolution			51
18.4 Supported Input Resolution - Video						51
18.5 Supported Input Resolution - Computer							52
18.6 Sound	52
18.7 Multimedia		52
18.8 Connectivity		52
19 Troubleshooting			53
19.1 Tips	53
19.2 Switch On		53
19.3 Remote Control			53

19.4Channels 53

19.5Satellite 54

19.6 Picture

54

19.7Sound 55

19.8HDMI - UHD 55

19.9USB 56

19.10 Wi-Fi and Internet	56
19.11 Wrong Menu Language	56

20 Safety and Care				57
20.1 Safety		57
20.2 Screen Care			58
21 Terms of Use				59
22 Copyrights			60
22.1 MHL		60
22.2	Ultra HD		60
22.3	HDMI	60
22.4	Dolby Audio		60
22.5	DTS-HD		60

22.6 Wi-Fi Alliance	60
22.7 Other Trademarks	60

23 Open Source	61
23.1 Open Source Software		61
23.2 Open Source License		61

24 Disclaimer regarding services and/or software offered by third parties 65

Index 66

2

1

Get Support

1.1

Identify and Register your TV

Identify your TV - TV model number and serial

number

You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.

Register your TV

Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases.

Go to www.philips.com/welcome

1.2

TV Help and User Manual

Settings > Help

You can use Help function to diagnose and get more information about your TV.

•How to - You can see instructions on how to install channels, sort channels, update TV software, connect external devices and use Smart functions on your TV.

•Check the TV - You can check if the picture, sound, Ambilight* are working fine during playing a short video clip.

•Check the network - Check the network connection.

•Update software - Check available software updates.

•User manual - Read the user manual for TV information.

•Troubleshooting - Find a solution for frequent ask questions.

•Factory settings - Reset all settings to factory settings.

•Reinstall TV - Reinstall and redo the complete TV installation.

•Contact info - Show the telephone number or web address for your country or region.

* Ambilight setting is only for models which support Ambilight function.

1.3	Downloaded
On-line Help and User
Manual	from
	www
To solve any Philips TV related problem, you can
consult our online support. You can select your
	.
	vandenborre

language and enter your product model number.

Go to www.philips.com/TVsupport.

On the support site you can find your country's

telephone number to contact us as well as answers to . frequently asked questions (FAQs). In some countries, be you can chat with one of our collaborators and ask

your question directly or send a question by email. You can download new TV software or the manual to read on your computer.

For more TV troubleshooting and frequently asked

questions (FAQs)...

Go

to http://philips-tvconsumercare.kxondemand.com/ portal/en/ModelSelect

TV Help on your tablet, smartphone or computer

To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or

computer. Alternatively, you can print the relevant Help page from your computer.

To download the Help (user manual) go to www.philips.com/TVsupport

1.4

Consumer Care / Repair

For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary.

Find the telephone number in the printed documentation that came with the TV. Or consult our

website www.philips.com/TVsupport and select your country if needed.

TV model number and serial number

You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.

Warning

Do not attemp to repair the TV yourself. This may cause severe injury, irrepairable damage to your TV or void your warranty.

3

2

Software

2.1

Update Software

Search for Updates

Update from Internet

(Home) > Settings > Update software > Search for updates > Internet (Recommended)

Look for a software update yourself.

•If the TV is connected to the Internet, you may receive a message to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you to carry out the update.

•During the software update, there is no picture and the TV will switch off and on again. This might happen several times. The update can take a few minutes.

•Wait until the TV picture comes back up. Do not press the power switch on the TV or on the remote control during the software update.

Update from USB

(Home) > Settings > Update software > Search for updates > USB

•You need a computer with an high-speed Internet connection and a USB memory device to upload the software on the TV.

•Use a USB memory device with 512MB free space. Make sure that write protection is switched off.

1 - Start the update on TV

Select Update software > Search for updates >

USB, then press OK.

2 - Identify the TV

Insert the USB memory into one of the USB connections of the TV.

Select Start and press OK. An identification file is written on the USB memory device.

3 - Download the TV software

-Insert the USB memory into your computer.

-On the USB memory device, locate the

file update.html and double click it. - Click on Send ID.

-If new software is available, download the .zip file.

-After the download, unzip the file and copy the file autorun.upg onto the USB memory device.

-Do not place this file in a folder.

4 - Update the TV software

Insert the USB memory into the TV again. The update starts automatically.

The TV switches itself off for 10 seconds and then

	back on again. Please wait.
	Do not . . .	Downloaded
	• use the remote control		from
	• remove the USB memory device from the TV
	• press twice			www
	• press the power switch on the TV
				.
	The TV switches itself off (for 10 seconds) and then
	back on again. Please wait.
	The TV software has been updated. You can use the
	TV again.			vandenborre
	To prevent an accidental update of the TV software,				.
					be
	delete the autorun.upg file from the USB memory
	device.
	Local Updates
	(Home)	> Settings > Update
	software >	Search for updates >		USB > Local
	updates.

For dealers and expert users.

Look for OAD updates (Over-the-air

Download)

(Home) > Settings > Update

software > Search for updates > Look for OAD updates.

Scan to search for an Over-the-air software update.

2.2

Software Version

(Home) > Settings > Update software > Current software info

To view the current TV software version.

4

3

Quick Guide

3.1

Remote Control

Batteries and Cleaning

Replace batteries

If the TV does not react on a key press on the remote control, the batteries might be empty.

To replace the batteries, open the battery compartment on the back of the remote control.

1 - Slide the battery door in the direction shown by the arrow.

2 - Replace the old batteries with 2

type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly.

3 - Reposition the battery door and slide it back until it clicks.

•Remove the batteries if you are not using the remote control for a long time.

•Safely dispose of your old batteries according to the end of use directions.

Cleaning

Your remote control is treated with a scratch-resistant coating.

To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.

Key Overview

Top

Downloaded
	from
	www
	.
	vandenborre
	.
1 - Standby / On	be

To switch the TV on or back to Standby.

2 - Playback and Record

•Play , to playback.

•Pause , to pause playback

•Stop , to stop playback

•Rewind , to rewind

•Fast forward , to go fast forward

•Record , to start recording

3 - Ambilight

To select one of the Ambilight style or switch off Ambilight.

4 - TV GUIDE

To open or close the TV Guide.

5 - Search

To open the Smart TV searches page.

6 - Settings

To open the Quick settings menu.

7 - SOURCES

To open the Sources menu.

8 - LIST

To open or close the channel list.

Middle

1 - Home

To open the Home menu.

5

2 - SMART TV

To open the Smart TV start page.

3 - Colour keys

Direct selection of options. Blue key , opens Help.

4 - INFO

To open or close programme info.

5 - BACK

To close a menu without changing a setting.

6 - - EXIT

To switch back to watch TV. To stop an interactive TV application.

7 - OPTIONS

To open or close the Options menu.

8 - OK key

To confirm a selection or setting. To open the channel list while watching TV.

9 - Arrow / navigation keys

To navigate up, down, left or right.

10 - Picture FORMAT

To open or close the Picture Format menu.

Bottom

1 -

To open the Netflix App directly. With the TV switched on or from standby.

•If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet.

•To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.

www.netflix.com

2 - Volume

To adjust the volume level.

3 - Number keys

To select a channel directly.

4 -	SUBTITLE	Downloaded
To switch subtitles on, off or to show automatically.
5 -	Channel	from
To switch to the next or previous channel in the
channel list. To open the next or previous page in
			www
Text/Teletext. To start the next or previous chapter on
a disc.			.
			vandenborre
6 -	Mute
To mute the sound or to restore it.
7 -	TEXT			.
To open or close Text/Teletext.
				be

3.2

IR sensor

The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.

Warning

Do not put any objects in front of IR sensor of the TV, it may block the IR signal.

3.3

Joysticker - Local Control

Keys on TV

If you lost the remote control or its batteries are empty, you can still do some basic TV operations.

To open the basic menu…

1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu.

2 - Press left or right to

select Volume, Channel or Sources. Select Demo, to start a demo movie.

6

3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection.

The menu will disappear automatically.

Downloaded from

www . vandenborre . be

7

4

Setting Up

4.1

Read Safety

Read the safety instructions first before you use the TV.

To read the instructions, in Help > User manual, press the colour key Keywords and look

up Safety and Care.

4.2

TV Placement

Tips on Placement

•Position the TV where light does not shine directly on the screen.

•Position the TV up to 15 cm away from the wall.

•The ideal distance to watch Ultra HD TV is 2 to 5 times of its screen height. When seated, your eyes should be level with the centre of the screen.

TV Stand

You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.

Use the model number of the TV to look for the Quick Start Guide to download.

Wall Mounting

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

	Downloaded
	from
	www
	.
• 43PUS6703	vandenborre
VESA MIS-F 200x200, M6 (Minimum 10 mm,		.
		be

Maximum 14 mm)

• 50PUS6703

VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 14 mm)

• 55PUS6703

VESA MIS-F 300x200, M6 (Minimum 10 mm, Maximum 14 mm)

• 65PUS6703

VESA MIS-F 400x200, M6 (Minimum 10 mm, Maximum 16 mm)

Preparation

First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV.

Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Caution

Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV.

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

4.3

Turn on TV

Connect Power Cable

•Insert the power cable into the POWER connector on the back of the TV.

•Make sure the power cable is securely inserted in the connector.

•Make sure that the power plug, in the wall socket, is accessible at all times.

•When you unplug the power cable, always pull the plug, never pull the cable.

8

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

On or Standby

Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.

Switch On

• Press the small joystick key on the back of the TV.

Switch to standby

To switch the TV to standby, press on the remote control. You can also press the small joystick key on the back of the TV.

In standby mode, the TV is still connected to the mains power but consumes very little energy.

To switch off the TV completely, disconnect the power plug.

When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.

Downloaded from

www . vandenborre . be

9

5

Connections

5.1

Connectivity guide

Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.

When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.

5.2

Antenna

Insert the antenna plug firmly into

the Antenna socket at the back of the TV.

You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

5.3

Satellite

Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.

Downloaded from

www . vandenborre . be

5.4

Video Device

HDMI

An HDMI connection has the best picture and sound quality.

For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m, and also connect devices supporting HDR on HDMI 2/HDMI 3.

Copy protection

HDMI ports support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management).

Component

Y Pb Pr - Component Video is a high quality connection.

The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound.

10

Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect.

Use an Audio L/R cinch cable if your device also has sound.

Composite

CVBS - Composite Video is a standard quality connection. Next to the CVBS signal adds the Audio Left and Right signals for sound.

•Y shares the same jack with CVBS.

•Component and Composite share audio jacks.

5.5

Audio Device

HDMI ARC

Only HDMI 1 on the TV have HDMI ARC (Audio Return Channel).

If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it

to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection

combines both signals.Downloaded from

www . vandenborre . be

Digital Audio Out - Optical

Audio Out - Optical is a high quality sound connection.

This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.

Headphones

You can connect a set of headphones to the connection on the side of the TV. The

connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.

11

5.6

Mobile Device

Wi-Fi Direct / Miracast

About Wi-Fi Miracast

You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™. The mobile device and the TV should be within range, which usually means being in the same room.

Check if your mobile device is ready for Miracast.

Your TV is a Wi-Fi CERTIFIED Miracast™ device. With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), share photos or anything else that's on screen of the device. No need to connect the device to your home network. Both the TV and the device must be Wi-Fi CERTIFIED Miracast™ devices and have Miracast switched on.

Miracast on this TV is subject to the HDCP protocol and cannot display copy-protected premium content sent by a device. The maximum video resolution supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz Wi-Fi.

For more information on Wi-Fi CERTIFIED Miracast™ go to www.wi-fi.org

Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.

Using Miracast

Switch on Miracast

Press SOURCES > Miracast

Share a Screen on TV

1 - Activate Miracast (Screen mirroring) on your mobile device.

2 - On your mobile device, select the TV. (This TV will be displayed as TV model name)

3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast.

Stop Sharing

You can stop sharing a screen from the TV or from the mobile device.

From the device

		Downloaded
With the application you use to start Miracast, you
can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected programme.			from
From the TV				www
To stop watching the screen of the device on TV, you
					.
can . . .					vandenborre
• press	EXIT to watch a TV broadcast
• press	(Home) to start another activity on TV
• press		SOURCES to open the Sources menu
					.
and select a connected device.					be

Reset Wi-Fi Miracast connections

All previously connected devices are stored in the WiFi Miracast list of connections.

To clear all connected Miracast devices…

(Home)	> Settings > All
settings >	Network > Reset Wi-Fi Miracast

connections.

Screen Delay

The normal delay when sharing a screen with Miracast is about 1 second. The delay might be longer if you are using older devices with less processing power.

MHL

This TV is MHL™ compliant.

If your mobile device is also MHL compliant, you can connect your mobile device with a MHL cable to the TV. With the MHL cable connected you can share what's on your mobile device on the TV screen. Your mobile device charges its battery at the same time. The MHL connection is ideal for watching movies or playing games from your mobile device on TV for a longer time.

Charging

With the MHL cable connected, your device will charge while the TV is switched on (not in standby).

MHL Cable

You need a passive MHL cable (HDMI to Micro USB) to connect your mobile device to the TV. You might need an extra adapter to connect to your mobile device. To connect the MHL cable to the TV use the HDMI 3 MHL connection.

12

MHL, Mobile High-Definition Link and the MHL Logo

are trademarks or registered trademarks of the MHL,

LLC.

Apps - Philips TV Remote App

With the TV Remote App, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. Look up what you want to watch on the TV Guide and watch it on your phone or TV. With the TV Remote App you can use your phone as a remote control*.

Download the Philips TV Remote App from your favourite app store today.

The Philips TV Remote App is available for iOS and Android and is free of charge.

* When use your phone as a remote control, TV cannot be switched on or off via your phone.

5.7

Other Device

CAM with Smart Card - CI+

About CI+

This TV is ready for the CI+ Conditional Access.

With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module.

Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection.

Contact a digital TV operator for more information on terms & conditions.

Smart Card

Downloaded from

www . vandenborre . be

Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes.

Insert the smart card into the CAM module. See the instruction you received from the operator.

To insert the CAM in the TV…

1.Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.

2.While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot COMMON INTERFACE.

3.Push the CAM in as far as it will go. Leave it in the slot permanently.

When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card.

The CAM and smart card are exclusively for your TV. If you remove the CAM, you will no longer be able to watch the scrambled channels supported by the CAM.

Set Passwords and PIN Codes

For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV.

13

When the USB Hard Drive is formatted, leave it connected permanently.

Warning

The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.

To read the instructions, in Help, press the colour key Keywords and look up USB Hard Drive.

Formatting

Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. If you want to record broadcasts with TV Guide data from the Internet, you must setup the Internet connection first before you install the USB Hard Drive.

Warning

The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another

To set the PIN code for the CAM…

1.Press SOURCES .

2.Select the channel type you are using the CAM for.

3.Press OPTIONS and select Common Interface.

4.Select the TV operator of the CAM. The following screens come from the TV operator. Follow the onscreen instruction to look up the PIN code setting.

USB Flash Drive

You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on.

The TV detects the flash drive and opens a list showing its content.

If the contents list does not appear automatically, press SOURCES and select USB.

For more information on watching or playing content from a USB flash drive, in Help, press the colour key Keywords and look up Photos, Videos and Music.

USB Hard Drive

Installation

If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar).

Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive.

To Pause

To pause a broadcast, you need a USB compatible Hard Drive with a minimum of 4GB disk space.

To Record

To pause and record a broadcast, you need a minimum of 250GB disk space. If you want to record

a broadcast with TV guide data from the Internet, you
need to have the Internet connection installed on
	Downloaded
your TV before you install the USB Hard Drive.
1 -	Connect the USB Hard Drive to one of
the	from
	USB connections on the TV. Do not connect
another USB device to the other USB ports when
	www
formatting.		.
2 -	Switch on the USB Hard Drive and the TV.
3 -	When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.		vandenborre
			.
Follow the instructions on screen.			be

14

USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.

To format a USB Hard Drive…

1 - Connect the USB Hard Drive to one of

the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.

2 - Switch on the USB Hard Drive and the TV.

3 - When the TV is tuned to a digital TV channel, press (Pause). Trying to pause will start the formatting. Follow the instructions on screen.

4 - The TV will ask if you want to use the USB Hard Drive to store apps, agree to the question if you do.

5 - When the USB Hard Drive is formatted, leave it connected permanently.

Downloaded from

www . vandenborre . be

15

6

Switch Source

6.1

Source List

•To open the sources menu, press SOURCES .

•To switch to a connected device, select the device

with the arrows (up) or

(down) and press OK.

• To close the source menu without switching to a device, press SOURCES again.

6.2

Rename Device

• Only CVBS, YPbPr, HDMI sources can be renamed or

replace device icon.

(Home) > Settings > All settings > General

settings > Input sources > Source > Edit

1 - Select one of the device icons and press OK, the

preset name appears in the typing field.

2 - Press (up) to move to the typing field, press

OK, then enter new name using on-screen keyboard.

-Press (red) key to enter with lower-case

-Press (green) key to enter with upper-case

-Press (yellow) key to enter number and symbol

-Press (blue) key to delete a character

3 - Select Done when complete the editing.

(up)

Downloaded from

www . vandenborre . be

16

7

Channels

7.1

About Channels and Switch

Channels

To watch TV channels

•Press . The TV tunes to the TV channel you last watched.

•Press (Home) > TV > Channels and

press OK.

• Press + or - to switch channels.

• If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.

• To switch back to the previously tuned channel, press BACK .

To switch to a channel from a channel list

•While watching a TV channel, press LIST to open the channel lists.

•The channel list can have several pages with channels. To view the next or previous page,

press + or -.

• To close the channel lists without switching channels, press LIST again.

Channel icons

After an Automatic channel update of the channel list, newly found channels are marked with a (star).

If you lock a channel, it will be marked with a (lock).

Radio channels

If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.

This TV can receive digital television standard DVB. TV may not work properly with some operators of digital television , non-compliance with requirements of the standard in full.

7.2

Install Channel

Antenna and Cable

Manually Search for Channels and Channel Settings

Search for Channels

Update channels

(Home)	> Settings > Install
Channels >	Antenna/cable installlation > Search

for channels			Downloaded
1 -
	Select Start now and press					OK.
2 -	Select Update channels to only add new digital
channels.					from
3 -	Select	Start and press OK to update channels.
						www
This can take a few minutes.							.
Quick reinstall
(Home)		>	Settings >	Install
Channels > Antenna/cable installlation >								Search
for channels							vandenborre
								.
1 -	Select Start now and press					OK.			be
2 - Select Quick reinstall to install all channels again
with default settings.
3 -	Select	Start and press OK to update channels.
This can take a few minutes.
Advanced reinstall
(Home)		>	Settings >	Install
Channels > Antenna/cable installlation >								Search
for channels
1 -	Select Start now and press					OK.
2 -	Select Advanced reinstall to do a full re-
installation which takes you through each step.
3 -	Select	Start and press OK to update channels.
This can take a few minutes.
Channel Settings
(Home)		>	Settings >	Install
Channels > Antenna/cable installlation >								Search
for channels			> Advanced reinstall
1 -	Select	Start now and press				OK.
2 -	Select Advanced reinstall to do a full re-
installation which takes you through each step.
3 -	Select	Start and press		OK.
4 -	Select the country where you are now and
press OK.
5 -	Select	Antenna (DVB-T) or Cable (DVB-C) ,
and select one item you need to re-install.
6 -	Select	Digital and analogue channels,						Only
digital channels, or Only analogue channels.
7 -	Select	Settings and press				OK.
8 -	Press Reset to reset, or press Done when

complete the settings.

Frequency scan

Select the method of searching for channels.

•Quick: select the faster method and use the predefined settings used by most cable providers in your country.

•Full: If this results in having no channels installed or if some channels are missing, you can select the extended Full method. This method will take more time to search for and install channels.

•Advanced: If you received a specific network

17

frequency value to search for channels, select Advanced.

Frequency step size

The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if

some channels are missing, you can search in smaller steps of 1MHz. Using the 1MHz steps will take more time to search for and install channels.

Network frequency mode

If you intend to use the fast Quick method in Frequency scan to search for channels,

select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable providers in your country.

If you received a specific network frequency value to search for channels, select Manual.

Network frequency

With the Network frequency mode set to Manual, you can enter the network frequency value received from your cable provider here. To enter the value, use the number keys.

Network ID

Enter the network ID supplied by your cable provider.

Symbol rate mode

If your cable provider did not give you a

specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic. If you received a specific symbol rate value,

select Manual.

Symbol rate

With the Symbol rate mode set to Manual, you can enter the symbol rate value by using the number keys.

Free / Scrambled

If you have a subscription and a CAM - Conditional Access Module for pay TV services, select Free + scrambled. If you did not subscribe to pay TV channels or services, you can select Free channels only .

Automatically Search for Channels

(Home) > Settings > Install Channels > Antenna/cable installlation > Automatic channel update

If you receive digital channels, you can set the TV to automatically update the list with new channels.

Alternatively, you can start a channel update yourself.

Automatic channel update

Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in

the All channels list but a so in the New channels list.
Empty channels are removed.
	Downloaded
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
	from
TV must be in standby to automatically update
channels.		www
		.
Channel Update Message		vandenborre
(Home)	> Settings > Install
Channels >
	Antenna/cable installlation > Channel .
update message			be

When new channels are found or if channels are updated or removed, a message is shown at TV start up. To avoid this message to appear after every channel update, you can switch it off.

Digital: Reception Test

(Home) > Settings > Install

Channels > Antenna/cable installlation > Digital: reception test

The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again,

select Search and press OK.

To enter a specific digital frequency yourself, use the remote control digit keys. Alternatively, select the frequency, position the arrows on a number

with and and change the number with and . To check the frequency,

select Search and press OK.

Analogue: Manual Installation

(Home) > Settings > Install

Channels > Antenna/cable

installlation > Analogue: manual installation

Analogue TV channels can be manually installed, channel by channel.

• System

To set up the TV system, select System.

Select your country or the part of the world where you are now and press OK.

• Search Channel
To find a channel, select		Search Channel and
press	OK. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press	OK, select Search and press OK to search
for a channel automatically. The found channel is
shown on screen and if the reception is poor,
press	Search again. If you want to store the channel,
select	Done and press	OK.

18

Search for

In some countries, you can adjust the expert settings for homing transponder and each LNB. Only use or change these settings when a normal installation fails. If you have non-standard satellite equipment, you can use these settings to overrule the standard settings. Some providers might give you some transponder or LNB valeus which you can enter here.

• Fine tune

To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or .

If you want to store the channel found, select Done and press OK.

• Store

You can store the channel on the current channel number or as a new channel number.

Select Store and press OK. The new channel number is shown briefly.

You can redo these steps until you have found all available analogue TV channels.

automatically.	Downloaded
• Up to 4 Satellites - You can install up to 4 satellites
(4 LNBs) on this TV. Select the exact number of
satellites you wish to install at the start of the
	from
installation. This will speed up the installation.
• Unicable - You can use a Unicable system to
	www
	.
connect the antenna dish to the TV. You can select
Unicable for 1 or for 2 satellites at the start of the
installation.	vandenborre
LNB settings		.
		be

Satellite

Search for Satellite and Satellite Settings							• LNB Power - By default, LNB Power is set to On.
							• 22 kHz Tone - By default, the Tone is set to Auto.
Search for Satellite Channel
							• Low LO Frequency / High LO Frequency - The local
(Home) > Settings >				Install			oscillator frequencies are set to standard values.
							Adjust the values only in case of exceptional
Channels		>	Satellite installlation >		Search for
							equipment that needs different values.
satellite
Update existing channel list
(Home) >			Settings >	Install
Channels		>	Satellite installlation >		Search for		Add Satellite or Remove Satellite
satellite >		Update channels
							(Home) > Settings > Install
							Channels	>	Satellite installlation >	Search for
Re-install all channels							satellite > Add satellite, Remove satellite
(Home) >			Settings >	Install
Channels		>	Satellite installlation >		Search for		(Home)		> Settings > Install
satellite >		Reinstall channels
							Channels	>	Satellite installlation >
• Select the group of channels you want to install.							satellite >	Add satellite
• Satellite operators can offer channel packages that							• You can add an additional satellite to your current
bundle free channels (free-to-air) and offer a sorting
							satellite installation. The installed satellites and their
that suits a country. Some satellites offer subscription
							channels remain untouched. Some satellite operators
packages - a collection of channels you pay for.
							do not allow adding a satellite.
							• The additional satellite should be seen as an extra, it
							is not your main satellite subscription or not the main
Satellite Settings
							satellite of which you use its channel package.
(Home) > Settings > Install							Typically, you would add a 4th satellite when you
					Search for		have 3 satellites already installed. If you have 4
Channels		>	Satellite installlation >				satellites installed, you might consider removing one
satellite >		Reinstall channels
							first to be able to add a new satellite.
1 - Select From a sorted package or All channels							• If you currently have only 1 or 2 satellites installed,
unsorted.							the current installation settings might not allow
2 -	Select	Settings and press OK.					adding an extra satellite. If you need to change the
3 -	Press	Reset to reset, or					installation settings, you must redo the complete
press Done when complete the settings.							satellite installation. You cannot use			Add satellite if
Connection type							a change of settings is needed.
Select the number of satellites you want to install.
The TV sets the appropriate connection type							(Home)		> Settings > Install

19

Channels	> Satellite installlation > Search for
satellite >	Remove satellite

You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite operators do not allow removing a satellite.

Automatically Search for Channels

(Home) > Settings > Install

Channels > Satellite installlation > Automatic channel update

If you receive digital channels, you can set the TV to automatically update the list with new channels.

Alternatively, you can start a channel update yourself.

Automatic channel update

Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the All channels list but also in the New channels list. Empty channels are removed.

If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels.

* Only available when Satellite channel list is set to

From a sorted package

Channel Update Message

(Home) > Settings > Install

Channels > Satellite installlation > Channel update message

When new channels are found or if channels are updated or removed, a message is shown at TV start up. To avoid this message to appear after every channel update, you can switch it off.

Automatic Update Option

(Home) > Settings > Install

Channels > Satellite installlation > Automatic update option

Unselect a satellite if you do not want to update automatically.

* Only available when Satellite channel list is set to

From a sorted package

Manual Installation
	Downloaded
(Home) > Settings > Install
Channels >	Satellite installlation >		Manual
installtion	from
		www
Manually install satellite.
			.
• LNB - Select the LNB for which you want to add
new channels.
• Polarisation - Select the polarisation you need.
• Symbol rate mode - Select Manual to enter symb l
rate.			vandenborre
				.
• Frequency - Enter the frequency for the				be
transponer.
• Search - Search for transponder.
Channel Packages
(Home) > Settings > Install
Channels >	Satellite installlation >		Satellite
channel list

Satellites can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country. Some satellites offer subscription packages - a collection of channels you pay for.

Select From a sorted channel package to install the channels of the package only or select All channel unsorted to install the package and all other available channels too. We recommend a Quick installation for subscription packages. If you have additional satellites that are not part of your subscription package, we recommend a full installation. All installed channels are put in the channels list.

Satellite CAMs

If you use a CAM – a Conditional Access Module with a smart card – to watch satellite channels, we recommend to do the satellite installation with the CAM inserted in the TV.

Most CAMs are used to descramble channels.

CAMs (CI+ 1.3 with Operator Profile) can install all the satellite channels by themselves on your TV. The CAM will invite you to install its satellite(s) and channels. These CAMs not only install and descramble the channels but also handle regular channel updates.

20

Channel List copy

Introduction

Channel list copy is intended for dealers and expert users.

With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV. Use a USB flash drive of minimum 1 GB.

Conditions

•Both TVs are from the same year range.

•Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV.

•Both TVs have compatible software versions.

Copy a Channel List, Check Channel List Version

Copy a channel list to USB flash drive

(Home) > Settings >	All settings > Channels
> Expert mode settings >	Channel list
copy > Copy to USB
Check channel list version
(Home) > Settings >	All settings > Channels
> Expert mode settings >	Channel list
copy > Current version

Upload a Channel List

To not Installed TVs

Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.

To a TV that is not yet installed

1 - Plug in the power plug to start the installation and select language and country. You can skip the channel search. Finish the installation.

2 - Plug in the USB flash drive that holds the channel list of the other TV.

3 - To start the channel list upload, press (Home) > Settings > All

settings	>	Channels > Expert mode
settings	>	Channel List Copy > Copy to TV and

press OK. Enter your PIN code if necessary.

4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive.

	To Installed TVs			Downloaded
	Depending on whether your TV is already installed or
	not, you must use a different method to upload a
	channel list.				from
						www
	To an already installed TV
						.
	1 - Verify the country setting of the TV. (To erify this
	setting, see chapter Re-install channels. Start this
	procedure until you reach the country setting.
	Press	BACK to cancel the installation.)
						vandenborre
	If the country is correct continue with step 2.						.
	If the country is not correct, you need to start a
							be
	reinstallation. See chapter Re-install channels and
	start the installation. Select the correct country and
	skip the channels search. Finish the installation. When
	done, continue with step 2.
	2 - Plug in the USB flash drive that holds the channel
	list of the other TV.
	3 - To start the channel list upload,
	press (Home) > Settings > All
	settings	>	Channels > Expert mode
	settings	>	Channel List Copy >			Copy to TV and

press OK. Enter your PIN code if necessary.

4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive.

Channel Options

Open Options

While watching a channel, you can set some options.

Depending on the type of channel you are watching or depending on the TV settings you made, some options are available.

To open the options menu…

1 -	While watching a channel, press OPTIONS.
2 -	Press OPTIONS again to close.

Subtitles

To switch on Subtitles, press SUBTITLE.

You can switch

subtitles Subtitle on or Subtitle off . Alternatively you can select Automatic.

Automatic

If language information is part of the digital broadcast and the broadcasted programme is not in your language (the language set on TV), the TV can show subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages must also be part of the broadcast.

You can select your preferred subtitle languages in Subtitle language.

21