Philips 58PUG6654/78, 50PUG6654/78, 55PUG6654/78 instructions for use
Register your product and get support at
www.philips.com/TVsupport
6654 series
User Manual
50PUG6654
55PUG6654
58PUG6654
65PUG6654
Contents
1 Get Support 3
1.1 Identify and Register Your TV 3
1.2 TV Help and User Manual 3
1.3 On-line Help and User Manual 3
1.4 Consumer Care / Repair 3
2 Software 4
2.1 Update Software 4
2.2 Software Version 4
3 Quick Guide 5
3.1 Remote Control 5
3.2 IR sensor 6
3.3 Joystick - Local Control 6
4 Setting Up 7
4.1 Read Safety 7
4.2 TV Placement 7
4.3 Turn on TV 7
5 Connections 9
5.1 Connectivity guide 9
5.2 Antenna 9
5.3 Video Device 9
5.4 Audio Device 9
5.5 Mobile Device 10
5.6 Other Device 11
5.7 Bluetooth 12
6 Switch Source 14
6.1 Source List 14
6.2 Rename Device 14
7 Channels 15
7.1 About Channels and Switch Channels 15
7.2 Install Channel 15
7.3 Channel List 17
7.4 Favorite Channels 18
7.5 Closed Caption and Language 18
7.6 Ginga 19
8 TV guide 20
8.1 What You Need 20
8.2 Using the TV Guide 20
9 Recording and Pause TV 22
9.1 Recording 22
9.2 Pause TV 23
10 Videos, Photos and Music 24
10.1 From a USB Connection 24
10.2 Photos 24
10.3 360 Photo 24
10.4 Videos 25
10.5 Music 25
11 Open TV Setting Menus 26
11.1 Home Menu Overview 26
11.2 Frequent settings and All settings 26
11.3 All Settings 26
12 Networks 36
12.1 Home Network 36
12.2 Connect to Network 36
12.3 Wireless and Network Settings 37
12.4 Interactive TV settings 37
13 Smart TV 39
13.1 Setup Smart TV 39
13.2 Smart TV Start Page 39
13.3 App Gallery 39
14 TV on Demand 40
15 Netflix 41
16 Amazon Prime Video 42
17 YouTube 43
18 Environmental 44
18.1 Energy Label 44
18.2 End of Use 44
19 Specifications 45
19.1 Power 45
19.2 Reception 45
19.3 Display Resolution 45
19.4 Supported Input Resolution - Video 45
19.5 Supported Input Resolution - Computer 45
19.6 Sound 45
19.7 Multimedia 46
19.8 Connectivity 46
20 Troubleshooting 47
20.1 Tips 47
20.2 Switch On 47
20.3 Remote Control 47
20.4 Channels 47
20.5 Picture 48
20.6 Sound 49
20.7 HDMI - UHD 49
20.8 USB 49
20.9 Wi-Fi and Internet 49
20.10 Wrong Menu Language 50
21 Safety and Care 51
21.1 Safety 51
21.2 Screen Care 52
22 Terms of Use 53
23 Copyrights 54
23.1 HDMI 54
23.2 Dolby Audio 54
23.3 Dolby Vision and Dolby Atmos 54
23.4 DTS-HD (italics) 54
23.5 ANATEL 54
23.6 Wi-Fi Alliance 54
23.7 Other Trademarks 54
24 Open Source 56
24.1 Open Source Software 56
24.2 Open Source License 56
25 Disclaimer regarding services and/or
software offered by third parties 60
Index 61
2
1
1.3
Get Support
1.1
Identify and Register Your TV
Identify your TV - TV model number and serial
number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Register your TV
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/TVsupport
On-line Help and User
Manual
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/TVsupport.
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
For more TV troubleshooting and frequently asked
questions (FAQs)...
Go
to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
1.2
TV Help and User Manual
(Home) > Settings > Help
You can use the Help function to diagnose and get
more information about your TV.
• TV information - View the Model name, Serial
number and Software version of your TV.
• How to - You can see instructions on how to
install channels, sort channels, update TV software,
connect external devices and use Smart functions on
your TV.
• Check the TV - You can check if the picture and
sound are working fine while playing a short video
clip.
• Check the Network - Check the Network
Connection.
• Update software - Check available software
updates.
• User manual - Read the user manual for TV
information.
• Troubleshooting - Find a solution for frequently
asked questions.
• Factory settings - Reset all settings to factory
settings.
• Reinstall TV - Reinstall and redo the complete TV
installation.
• Contact info - Shows the telephone number or web
address for your country or region.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer.
To download the Help (user manual) go
to www.philips.com/TVsupport
1.4
Consumer Care / Repair
For support and repair, call the Consumer Care
hotline in your country. Our service engineers will take
care of a repair, if necessary.
Find the telephone number in the printed
documentation that came with the TV.
Or consult our
website www.philips.com/TVsupport and select
your country if needed.
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Warning
Do not attempt to repair the TV yourself. This may
cause severe injury, irreparable damage to your TV or
void your warranty.
3
2
Software
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
2.1
Update Software
Search for Updates
Update from Internet
(Home) > Settings > All settings > Update
software > Search for updates > Internet
(Recommended)
Look for a software update yourself.
• If the TV is connected to the Internet, you may
receive a message to update the TV software. You
need a high-speed (broadband) Internet
connection. If you receive this message, we
recommend you to carry out the update.
• During the software update, there is no picture and
the TV will switch off and on again. This might happen
several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not
press the power switch on the TV or on the
remote control during the software update.
• use the remote control
• remove the USB memory device from the TV
• press twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.
The TV software has been updated. You can use the
TV again.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB memory
device.
Local Updates
(Home) > Settings > All settings > Update
software > Search for updates > USB > Local
updates.
For dealers and expert users.
2.2
Software Version
Update from USB
(Home) > Settings > All settings > Update
software > Search for updates > USB
• You need a computer with a high-speed Internet
connection and a USB memory device to upload the
software on the TV.
• Use a USB memory device with 512MB free space.
Make sure that write protection is switched off.
1 - Start the update on TV
Select Update software > Search for updates >
USB, then press OK.
2 - Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
(Home) > Settings > All settings > Update
software > Current software info
To view the current TV software version.
4
3
Quick Guide
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back of the remote control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
• Remove the batteries if you are not using the remote
control for a long time.
• Safely dispose of your old batteries according to the
end of use directions.
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
Middle
1 - OK key
To confirm a selection or setting. To open the channel
list while watching TV.
2 - Arrow / navigation keys
To navigate up, down, left or right.
3 - BACK
To close a menu without changing a setting.
4 - Playback and Record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to start recording
5 - OPTIONS
To open or close the Options Menu.
Key Overview
Top
1 - Standby / On
To switch the TV on or back to Standby.
2 - INFO
To open or close program info.
3 - SOURCES
To open the Sources menu.
4 - Search
To open the Smart TV search page.
6 - Home
To open the Home menu.
7 - Color keys
Direct selection of options. Blue key , opens Help.
Bottom
1 -
5
To open the Netflix App directly. With the TV switched
on or from standby.
• If you have a Netflix membership subscription, you
can enjoy Netflix on this TV. Your TV must be
connected to the Internet.
• To open Netflix, press to open the Netflix
App. You can open Netflix immediately from a TV in
standby.
www.netflix.com
2 - Mute / Volume
Press in middle to mute the sound or to restore it.
Press or to adjust the volume.
3 - Number keys
To select a channel directly.
4 - (Dot)
To enter digital sub-channels.
5 - EXIT / Channe l
Press in the middle to switch back to watching TV or
to stop an interactive TV application.
Press or to switch to the next or previous
channel on the channel list.
6 - SMART TV
To open the Smart TV start page.
7 - YouTube
To open the YouTube app directly.
3.3
Joystick - Local Control
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1 - With the TV switched on, press the joystick key at
the bottom of the TV to bring up the basic menu.
2 - Press left or right to
select Volume, Channel, or Sources.
Select Demo to start a demo movie.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection.
The menu will disappear automatically.
8 - LIST / TV GUIDE
Long press to open the channel list.
Short press to open or close the TV Guide.
3.2
IR sensor
The TV can receive commands from a remote control
that uses infrared (IR) to send commands. If you use
this kind of remote control, always point it at the
infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV
as it may block the IR signal.
6
4
Wall Mounting
Setting Up
4.1
Read Safety
Read the safety instructions first before you use the
TV.
To read the instructions, in Help > User manual,
press the color key Keywords and look
up Safety and Care.
4.2
TV Placement
Tips on Placement
• Position the TV where light does not shine directly
on the screen.
• Position the TV up to 6 inches away from the wall.
• The ideal distance to watch Ultra HD TV is 2 to 5
times of its screen height. When seated, your eyes
should be level with the center of the screen.
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
• 50PUx6654
VESA MIS-F 200x200, M6 (Minimum 16 mm,
Maximum 22 mm)
• 55PUx6654
VESA MIS-F 200x200, M6 (Minimum 14 mm,
Maximum 16 mm)
• 58PUx6654
VESA MIS-F 300x200, M6 (Minimum 20 mm,
Maximum 24 mm)
• 65PUx6654
VESA MIS-F 300x300, M6 (Minimum 17 mm,
Maximum 25 mm)
Caution
Note:
Keep the TV away from dust-producing sources, such
as stoves. Remove dust regularly to prevent dust from
getting into the TV.
TV Stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide that comes with the TV.
You can also download it
from www.philips.com/TVsupport.
Use the model number of the TV to look for
the Quick Start Guide to download.
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
4.3
Turn on TV
Connect Power Cable
• Insert the power cable into the POWER connector
on the back of the TV.
• Make sure the power cable is securely inserted in
the connector.
• Make sure that the power plug, in the wall socket, is
accessible at all times.
• When you unplug the power cable, always pull the
plug, never pull the cable.
7
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
On or Standby
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
Switch On
• Press the small joystick key at the bottom of the TV.
Switch to standby
To switch the TV to standby, press on the remote
control. You can also press the small joystick key at
the bottom of the TV.
In standby mode, the TV is still connected to the
mains power but consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
8
5
Connections
5.1
Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
5.2
Antenna
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or connect to an
antenna signal from an antenna distribution system.
Use an F-type 75-ohm RF antenna connector.
Copy protection
HDMI ports support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights
Management).
Composite
AV IN - Composite Video is a standard quality
connection. The Audio Left and Right signals for
sound are next to the CVBS.
5.3
Video Device
HDMI
An HDMI connection has the best picture and sound
quality.
For best signal quality transfer, use a high-speed
HDMI cable. Do not use an HDMI cable longer than
16 feet (5 meters). You can connect devices
supporting HDR to any of the HDMI connectors.
5.4
Audio Device
HDMI ARC
Only HDMI 1 on the TV has HDMI ARC (Audio
Return Channel).
If the device, typically a Home Theater System (HTS),
also has the HDMI ARC connection, connect it
to HDMI 1 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
9
Digital Audio Out - Optical
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theater System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
5.5
Mobile Device
Screen Mirroring
Using Screen Mirroring
Switch on Screen mirroring
Press SOURCES > Screen mirroring
Share a Screen on TV
1 - Activate Screen mirroring on your mobile device.
2 - On your mobile device, select the TV. (This TV will
be displayed as TV model name)
3 - Select the TV name on your mobile device, and,
after connection, you can enjoy using Screen
mirroring.
Stop Sharing
You can stop sharing a screen from the TV or the
mobile device.
Headphones
You can connect a set of headphones to
the connection on the side of the TV. The
connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
From the device
With the application you use to start Screen mirroring,
you can disconnect and stop watching the screen of
the device on the TV. The TV will switch back to the
last selected program.
From the TV
To stop watching the screen of the device on TV, you
can . . .
• press EXIT to watch a TV broadcast
• press (Home) to start another activity on TV
• press SOURCES to open the Sources menu
and select a connected device.
Block a Device
The first time you receive a request to connect from a
device, you can block the device. The request from
this device and all its requests in the future, will be
ignored.
Note: Some devices do not support this function.
To block a device…
Select Block… and press OK.
Unblock all devices
All previously connected and blocked devices are
stored in the Screen mirroring list of connections. If
you clear this list, all blocked devices will be
unblocked.
10
To unblock all blocked devices…
(Home) > Settings > All settings > Network >
Reset Screen mirroring connections .
Blocking a previously connected device
If you want to block a device that you previously
connected, you need to clear the Screen mirroring
connections list first. If you clear this list, you will have
to confirm or block the connection for every device
again.
Reset Screen mirroring connections
All previously connected devices are stored in the
Screen mirroring list of connections.
To clear all connected Screen mirroring devices…
(Home) > Settings > All
settings > Network > Reset Screen mirroring
connections.
Screen Delay
The normal delay when sharing a screen with Screen
mirroring is about 1 second. The delay might be
longer if you are using older devices with less
processing power.
USB Flash Drive
You can view photos or play your music and videos
from a connected USB flash drive. Insert a USB flash
drive in one of the USB connections on the TV while
the TV is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCES and select USB.
For more information on watching or playing content
from a USB flash drive, in Help, press the color
key Keywords and look up Photos, Videos and
Music.
USB Hard Drive
Apps - Philips TV Remote App
With the TV Remote App, you master your media
around you. Send photos, music or videos to your big
TV screen or watch any of your TV channels live on
your tablet or phone. Look up what you want to
watch on the TV Guide and watch it on your phone or
TV. With the TV Remote App you can use your phone
as a remote control*.
Download the Philips TV Remote App from your
favorite app store today.
The Philips TV Remote App is available for iOS and
Android and is free of charge.
* When use your phone as a remote control, TV
cannot be switched on or off via your phone.
5.6
Other Device
Installation
If you connect a USB Hard Drive, you can pause or
record a TV broadcast. The TV broadcast must be a
digital broadcast (DVB broadcast or similar).
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
To Pause
To pause a broadcast, you need a USB-compatible
Hard Drive with a minimum of 4GB of disk space.
To Record
To pause and record a broadcast, you need a
minimum of 250GB disk space. If you want to record
a broadcast with TV guide data from the Internet, you
need to have the Internet connection installed on
your TV before you install the USB Hard Drive.
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
Follow the instructions on screen.
11
When the USB Hard Drive is formatted, leave it
connected permanently.
5.7
Bluetooth
What You Need
You can connect a wireless device with Bluetooth® to
this TV – a wireless speaker or headphones.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
To read the instructions, in Help, press the color
key Keywords and look up USB Hard Drive.
Formatting
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard
Drive. If you want to record broadcasts with TV Guide
data from the Internet, you must setup the Internet
connection first before you install the USB Hard Drive.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
To format a USB Hard Drive…
1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting. Follow the instructions on screen.
4 - The TV will ask if you want to use the USB Hard
Drive to store apps. Select Agree if you do.
5 - When the USB Hard Drive is formatted, leave it
connected permanently.
To play the TV sound on a wireless speaker, you must
pair the wireless speaker with the TV. The TV can only
play the sound on one speaker at a time.
Attention - Audio to Video synchronization
Many Bluetooth speaker systems have a high, so
called, "latency." High latency means that the audio
lags behind the video, causing unsynchronized "lip
sync." Before you purchase a wireless Bluetooth
speaker system, learn about the newest models and
look for a device with a low latency rating. Ask your
dealer for advice.
Pairing a Device
Position the wireless speaker within a distance of
about 16 feet from the TV. Read the user manual of
the device for specific information on pairing and on
wireless range. Make sure the TV's Bluetooth setting is
switched on.
When a wireless speaker is paired, you can select it to
play the TV sound. When a device is paired, you do
not need to pair it again unless you remove the
device.
To pair a Bluetooth device with the TV…
1 - Switch on the Bluetooth device and place it within
range of the TV.
2 - Select (Home) > Settings > All
settings > Wireless and Networks and
press (right) to enter the menu.
3 - Select Bluetooth > Search Bluetooth Device,
and press OK.
4 - Select Search and press OK. Follow the
instructions on the screen. You will pair the device
with the TV, and the TV will store the connection. You
might need to unpair a paired device first if the
maximum number of paired devices has been
reached.
5 - Select the type of device and press OK.
6 - Press (left) repeatedly if necessary, to close
the menu.
12
Select a Device
To select a wireless device…
1 - Select (Home) > Settings > All
settings > Wireless and Networks and press OK.
2 - Select Bluetooth > Search Bluetooth
Device and press OK.
3 - In the list, select the wireless device and
press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
You can also select the connected device ...
1 - Select (Home) > Settings > Audio out and
press OK.
2 - In the list, select the wireless device and press
OK.
Remove a Device
You can connect or disconnect a wireless Bluetooth
device. You can also remove a wireless Bluetooth
device. If you remove a Bluetooth device, the device
will be unpaired.
To remove or disconnect a wireless device…
1 - Select (Home) > Settings > All
settings > Wireless and Networks and press OK.
2 - Select Bluetooth > Remove Bluetooth
device and press OK.
3 - In the list, select the wireless device and
press OK.
4 - Select Disconnect or Remove and press OK.
5 - Select OK and press OK to confirm.
6 - Press (left) repeatedly if necessary, to close
the menu.
13
6
Switch Source
6.1
Source List
• To open the sources menu, press SOURCES .
• To switch to a connected device, select the device
with the arrows (Right) or (Left) and press OK.
• To view the technical information of the connected
device you are watching, press OPTIONS and
select Device info.
• To close the source menu without switching to a
device, press SOURCES again.
6.2
Rename Device
• Only CVBS, HDMI sources can be renamed or
replace device icon.
(Home) > Settings > All settings > General
settings > Input sources > Source > Edit
1 - Select one of the device icons and press OK.
The preset name then appears in the text field.
2 - Press (up) to move to the text field, press OK,
then enter a new name using the on-screen
keyboard.
- Press the (red) key to use lowercase
- Press the (green) key to use uppercase
- Press the (yellow) key to enter numbers and
symbols
- Press the (blue) key to delete a character
3 - Select Enter when you are done.
14
7
Channels
7.1
About Channels and Switch
Channels
To watch TV channels
• Press . The TV tunes to the TV channel you last
watched.
• Press (Home) > TV > Channels then
press OK.
• Press + or - to switch channels.
• If you know the channel number, type in the number
with the number keys. Press OK after you entered
the number to switch channels.
• To switch back to the previously tuned channel,
press BACK .
To switch to a channel from a channel list
• While watching a TV channel, press OK to open the
channel lists.
• The channel list can have several pages with
channels. To view the next or previous page,
press + or -.
• To close the channel lists without switching
channels, press BACK or EXIT .
Channel icons
After an Automatic channel update of the channel list,
newly found channels are marked with a (star).
If you lock a channel, it will be marked with
a (lock).
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
1 - Select Start now and press OK.
2 - Select Update channels to only add new digital
channels.
3 - Select Start and press OK to update channels.
This can take a few minutes.
Quick reinstall
(Home) > Settings > Install
Channels > Antenna/Cable Installation > Search
for channels
1 - Select Start now and press OK.
2 - Select Quick reinstall to install all channels again
with default settings.
3 - Select Start and press OK to update channels.
This can take a few minutes.
Advanced reinstall
(Home) > Settings > Install
Channels > Antenna/Cable Installation > Search
for channels
1 - Select Start now and press OK.
2 - Select Advanced reinstall to do a full re-
installation which takes you through each step.
3 - Select Start and press OK to update channels.
This can take a few minutes.
Service Navigation
(Home) > Settings > Install
Channels > Antenna/Cable Installation > Service
navigation
• If the Service navigation is set to On, You can
browse the primary and secondary channels by
pressing channel and .
• If the Service navigation is set to Off, you can only
browse the primary channels using
channel and .
This TV can receive digital television standard time
DVB. TV may not work properly with some operators
of digital television , non-compliance with
requirements of the standard in full.
7.2
Install Channel
Antenna/Cable Installation
Search for Channels
Update channels
(Home) > Settings > Install
Channels > Antenna/Cable Installation > Search
for channels
Digital: Reception Test
(Home) > Settings > Install
Channels > Antenna/Cable Installation > Digital:
reception test
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with and and change the number
with and . To check the frequency,
select Search and press OK.
15
Antenna Connection
Upload a Channel List
(Home) > Settings > Install
Channels > Antenna/Cable Installation > Antenna
Connection
1 - Select Antenna or Cable, and press OK.
2 - Select Start and press OK. This can take a few
minutes.
Channel Logos
(Home) > Settings > All settings > Channels
> Channel logos
In some countries, the TV can show the channel
logos. If you do not want these logos to appear, you
can switch them off.
Channel List copy
Introduction
Channel list copy is intended for dealers and expert
users.
With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel list copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
• Both TVs must be from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV.
• Both TVs have compatible software versions.
Copy a Channel List, Check Channel List Version
Copy a channel list to USB flash drive
(Home) > Settings > All
settings > Channels > Expert mode
settings > Channel list copy > Copy to USB
To not Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload,
press (Home) > Settings > All
settings > Channels > Expert mode
settings > Channel List Copy > Copy to TV, then
press OK. Enter your PIN code, if necessary.
4 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, see chapter Re-install channels. Start this
procedure until you reach the country setting.
Press BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter Re-install channels and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload,
press (Home) > Settings > All
settings > Channels > Expert mode
settings > Channel List Copy > Copy to TV, then
press OK. Enter your PIN code, if necessary.
4 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
Check channel list version
(Home) > Settings > All
settings > Channels > Expert mode
settings > Channel list copy > Current version
Channel Options
Open Options
While watching a channel, you can set some options.
Depending on the type of channel you are watching
or depending on the TV settings you made, some
options are available.
16
To open the options menu…
1 - While watching a channel, press OPTIONS.
2 - Press OPTIONS again to close.
7.3
Channel List
Open Channel List
Program info
Select Program info to view information about the
program you are watching.
Audio Language
If none of the preferred audio languages are
available, you can select another audio language if
available. If no audio languages are available, you
cannot select this option.
To read more information, in Help, press the color
key Keywords and look up Audio Language.
Closed Caption
To switch on Closed Caption,
press OPTIONS, then select Closed Caption.
Switch Closed Caption On or Off with this option.
Select On During Mute to show closed captions
only when the sound is muted with .
Caption Service
Select the correct type of closed caption services.
For more information, in Help,
press Keywords and look up Closed Caption.
To open the current channel list…
1 - Press , to switch to TV.
2 - Press OK to open the current channel list.
3 - Press OPTIONS > Select channel list, or
long press TV Guide to open the channel list.
4 - Select one channel list you want to watch.
5 - Press BACK to close the channel list.
Channel List Options
Open Option Menu
To open the channel list option menu...
• Press , to switch to TV.
• Press OK to open the current channel list.
• Press OPTIONS , and select one of options.
• Press BACK to close the channel list.
Select Channel Filter
1 - Press , to switch to TV.
2 - Press OK to open the current channel list.
3 - Press OPTIONS > Digital
4 - Select one of channel combinations showing in
the channel list.
Create or Edit Favorites Channel List
Dual I-II
This option is available if an audio signal contains two
audio languages, but one or both languages has no
language indication.
Channel info
Select Channel info to view technical information
about the channel.
Universal Access
Only available when Universal access is set to On.
(Home) > Settings > All settings > Universal
access > Universal access > On.
To read more information, in Help, press the color
key Keywords and look up Universal Access.
> OK > OPTIONS > Create favorites list
Select a channel then press OK to add in a favorites
channel list, once completed, press Done.
> OK > OPTIONS > Edit favorites
Select a channel, then press OK to add to or remove
from a channel favorites list. When you are done,
press Done.
Select Channel Range
> OK > OPTIONS > Select channel range
Select a range of channels in a favorites channel list,
once completed, press OK.
17
Select Channel List
About favorite Channels
> OK > OPTIONS > Select channel list
Select a range of channels in a favorites channel list,
once completed, press OK.
Search Channels
> OK > OPTIONS > Search channel
You can search for a channel to find it in a long list of
channels.
1 - Press , to switch to TV.
2 - Press OK to open the current channel list.
3 - Press OPTIONS > Search channel, and
press OK.
4 - In the typing field, press OK to open on-screen
keyboard, or press BACK to hide the on-screen
keyboard.
5 - Use the navigation keys to select a character,
then press OK.
- Press the (red) key to use lowercase
- Press (green) key to use uppercase
- Press the (yellow) key to enter numbers and
symbols
- Press the (blue) key to delete a character
- Select Enter to start searching
6 - Select Done when the search is done.
7 - Press BACK to close the channel list.
You can create a favorite channel list that only holds
the channels you want to watch. With the Favorite
channel list selected, you will only see your favorite
channels when you switch through channels.
Create a favorites List
1 - While watching a TV channel, press OK to open
the channel list.
2 - Select the channel, and press Mark as
favorites to mark as favorite.
3 - The selected channel is marked with a .
4 - To finish, press BACK . The channels are
added to the Favorites list.
Remove Channel from the Favorites
List
To remove a channel from the favorites list, select the
channel with , then press Unmark as
favorites again to unmark as favorites.
Favorites List on TV Guide
Lock or Unlock Channel
> OK > OPTIONS > Lock channel, Unlock
channel
To prevent children from watching a channel, you can
lock a channel. To watch a locked channel, you must
enter the 4-digit Child Lock PIN code first. You
cannot lock programs from connected devices.
The locked channel will have next to the channel
logo.
Remove Favorite List
> OK > OPTIONS > Remove favorite list
To remove existing favorite list, select Yes.
7.4
Favorite Channels
You can link the TV Guide to your Favorites List.
1 - While watching a TV channel,
press OK > OPTIONS > Select channel list.
2 - Select Antenna favorite or Cable Favorite, and
press OK.
3 - Press TV GUIDE to open it.
Use the TV Guide to view a list of current and
scheduled TV programs on your favorite channels.
Also, the 3 most watched channels on the
broadcasters' default list appear after your favorite
channels for preview. You need to add these
channels to your favorites list to enable their
operation (refer to "TV Guide" chapter).
On each page of the TV Guide, there is a "Did you
know" grid inserted on your channel favorites list. The
"Did you know" channel gives you useful tips on
improving the way you use your TV.
7.5
Closed Caption and
Language
18
Closed Caption
Menu Language
You can display closed captions at all times or only
when the TV is muted.
Note:
• Not all TV programs, commercials, and features
include closed captioning information. See your local
TV program listings for channels with
closed captions. The captioned programs
are typically listed with service marks, such as "CC,"
in the TV listings.
Switch on closed caption
1 - While you watch TV, press OPTIONS.
2 - Select Closed Caption > On and press OK.
• On: Closed caption is always on.
• Off: Closed caption is always off.
• On during mute: Closed caption is on only when the
sound is muted with .
Note: Ginga is for Brazil only.
• When CC set to On, Ginga is Off.
• When CC set to Off, Ginga is On or Off.
• When CC set to On or On during mute, Ginga is Off.
• When Ginga set to On, CC is Off.
To change the language of the TV menus and
messages…
1 - Press (Home), select Settings > All settings >
General settings > Language > Menu
language, then press OK.
2 - Select the language you want and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
7.6
Ginga
Note: This is for Brazil only.
You can set Ginga to On or Off.
1 - Press (Home).
2 - Select Settings > All Settings > Channels
> Ginga and press OK.
3 - Select On or Off.
Select type of closed caption
1 - While you watch TV, press OPTIONS.
2 - Select Caption Service.
3 - Select the correct type of closed captions and
press OK.
Audio Language
If the TV channel broadcasts multiple or dual audio
languages, you can select your preferred audio
language.
1 - While you watch TV, press OPTIONS.
2 - For digital channels, select Audio Language. For
analog channels, select Alternate Audio.
Press OK to confirm your selection.
3 - Select from the available languages, then
press OK.
Note:
If you have selected Alternate Audio for analog
channels, select between:
• Main: Primary audio language or
• SAP: Secondary audio language
19
Loading...