Philips 58PUG6513/78, 50PUG6513/78, 55PUG6513/78 instructions for use

Register your product and get support at
www.philips.com/TVsupport
6513 series
User Manual
50PUG6513
55PUG6513
58PUG6513

Contents

1.1 Identify and Register your TV 3
1.2 TV Help and User Manual 3
1.3 On-line Help and User Manual 3
1.4 Consumer Care / Repair 3
2 Software 4
2.1 Update Software 4
2.2 Software Version 4
3 Quick Guide 5
3.1 Remote Control 5
3.2 IR sensor 6
3.3 Joysticker - Local Control 6
4 Setting Up 7
4.1 Read Safety 7
4.2 TV Placement 7
4.3 Turn on TV 7
5 Connections 9
5.1 Connectivity guide 9
5.2 Antenna 9
5.3 Video Device 9
5.4 Audio Device 10
5.5 Mobile Device 10
5.6 Other Device 12
6 Switch Source 14
6.1 Source List 14
6.2 Rename Device 14
7 Channels 15
7.1 About Channels and Switch Channels 15
7.2 Install Channel 15
7.3 Channel List 17
7.4 Favorite Channels 18
7.5 Closed Caption (CC) and Language 18
7.6 Ginga 19
8 TV guide 20
8.1 What You Need 20
8.2 Using the TV Guide 20
9 Recording and Pause TV 22
9.1 Recording 22
9.2 Pause TV 22
10 Videos, Photos and Music 24
10.1 From a USB Connection 24
10.2 Photos 24
10.3 Videos 24
10.4 Music 25
11 Open TV Setting Menus 26
11.1 Home Menu Overview 26
11.2 Frequent settings and All settings 26
11.3 All Settings 26
12 Network 34
12.1 Home Network 34
12.2 Connect to Network 34
12.3 Network settings 35
12.4 Interactive TV settings 36
13 Smart TV 37
13.1 Setup Smart TV 37
13.2 Smart TV Start Page 37
13.3 App Gallery 37
14 Netflix 38 15 Environmental 39
15.1 Energy Label 39
15.2 End of Use 39
16 Specifications 40
16.1 Power 40
16.2 Reception 40
16.3 Display Resolution 40
16.4 Supported Input Resolution - Video 40
16.5 Supported Input Resolution - Computer 40
16.6 Sound 41
16.7 Multimedia 41
16.8 Connectivity 41
17 Troubleshooting 42
17.1 Tips 42
17.2 Switch On 42
17.3 Remote Control 42
17.4 Channels 42
17.5 Picture 43
17.6 Sound 44
17.7 HDMI - UHD 44
17.8 USB 44
17.9 Wi-Fi and Internet 44
17.10 Wrong Menu Language 45
18 Safety and Care 46
18.1 Safety 46
18.2 Screen Care 47
19 Terms of Use 48 20 Copyrights 49
20.1 MHL 49
20.2 HDMI 49
20.3 Dolby Audio 49
20.4 DTS HD 49
20.5 ANATEL 49
20.6 Wi-Fi Alliance 49
20.7 Other Trademarks 49
21 Open Source 51
21.1 Open Source Software 51
21.2 Open Source License 51
22 Disclaimer regarding services and/or software offered by third parties 55
Index 56
2
1
1.3
Get Support
1.1
Identify and Register your TV
Identify your TV - TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Register your TV
Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases.
Go to www.philips.com/TVsupport
On-line Help and User Manual
To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number.
Go to www.philips.com/TVsupport. On the support site you can find your country's
telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer.
For more TV troubleshooting and frequently asked questions (FAQs)...
Go to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
1.2
TV Help and User Manual
Settings > Help You can use the Help function to diagnose and get
more information about your TV.
How to - You can see instructions on how to
install channels, sort channels, update TV software, connect external devices and use Smart functions on your TV.
Check the TV - You can check if the picture and sound are working fine while playing a short video clip.
Check the Network - Check the Network Connection.
Update software - Check available software updates.
User manual - Read the user manual for TV information.
Troubleshooting - Find a solution for frequently asked questions.
Factory settings - Reset all settings to factory settings.
Reinstall TV - Reinstall and redo the complete TV installation.
Contact info - Shows the telephone number or web address for your country or region.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or computer. Alternatively, you can print the relevant Help page from your computer. To download the Help (user manual) go to www.philips.com/TVsupport
1.4
Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary.
Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed.
TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Warning
Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty.
3
2
Software
2.1
Update Software
Search for Updates
Update from Internet
(Home) > Settings > Update software > Search for updates > Internet
Look for a software update yourself.
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
• press twice
• press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait.
The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
• If the TV is connected to the Internet, you may receive a message to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you to carry out the update.
• During the software update, there is no picture and the TV will switch off and on again. This might happen several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not press the power switch on the TV or on the remote control during the software update.
Update from USB
(Home) > Settings > Update software > Search for updates > USB
• You need a computer with a high-speed Internet connection and a USB memory device to upload the software on the TV.
• Use a USB memory device with 512MB free space. Make sure that write protection is switched off.
1 - Start the update on TV
Select Update software > Search for updates > USB, then press OK. 2 - Identify the TV
Insert the USB memory into one of the USB connections of the TV. Select Start and press OK. An identification file is written on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update starts automatically. The TV switches itself off for 10 seconds and then
Local Updates
(Home) > Settings > Update software > Search for updates > USB > Local updates.
For dealers and expert users.
2.2
Software Version
(Home) > Settings > Update software > Current software Info
To view the current TV software version.
4
3
Quick Guide
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote control, the batteries might be empty.
To replace the batteries, open the battery compartment on the back of the remote control.
1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 Alkaline, type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.
• Remove the batteries if you are not using the remote control for a long time.
• Safely dispose of your old batteries according to the end of use directions.
Cleaning
• Fast forward , to go fast forward
• Record , to start recording 3 - Media browser
To open or close the Media browser menu. 4 - TV GUIDE
To open or close the TV Guide. 5 - Search
To open the Smart TV searches page. 6 - Settings
To open the Quick settings menu. 7 - SOURCES
To open the Sources menu. 8 - LIST
To open or close the channel list.
Middle
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
Key Overview
Top
1 - Standby / On
To switch the TV on or back to Standby. 2 - Playback and Record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
1 - Home To open the Home menu.
2 - SMART TV To open the Smart TV start page.
3 - Color keys Direct selection of options. Blue key , opens Help.
4 - INFO To open or close programme info.
5 - BACK To close a menu without changing a setting.
6 - EXIT To switch back to watch TV.
7 - OPTIONS To open or close the Options Menu.
8 - OK key To confirm a selection or setting. To open the channel list while watching TV.
9 - Arrow / navigation keys To navigate up, down, left or right.
10 - FORMAT To open or close the Picture Format menu.
5
Bottom
1 -
To open the Netflix App directly. With the TV switched on or from standby.
2 - Volume To adjust the volume level.
3 - Number keys To select a channel directly.
4 - CC (Closed captions) To switch Closed captions on, off or to show automatically.
5 - Channel To switch to the next or previous channel in the channel list. To start the next or previous chapter on a disc.
3.3
Joysticker - Local Control
Keys on TV If you lost the remote control or its batteries are
empty, you can still do some basic TV operations. To open the basic menu…
1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel, or Sources. Select Demo to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection.
The menu will disappear automatically.
6 - Mute To mute the sound or to restore it.
7 - (Dot) To enter digital sub-channels.
3.2
IR sensor
The TV can receive commands from a remote control that uses infrared (IR) to send commands. If you use this kind of remote control, always point it at the infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV as it may block the IR signal.
6
4
Setting Up
4.1
Read Safety
Read the safety instructions first before you use the TV.
To read the instructions, in Help > User manual, press the color key Keywords and look up Safety and Care.
4.2
TV Placement
Tips on Placement
• Position the TV where light does not shine directly on the screen.
• Position the TV up to 6 inches away from the wall.
• The ideal distance to watch Ultra HD TV is 2 to 5 times of its screen height. When seated, your eyes should be level with the center of the screen.
• 50"
VESA MIS-F 200x200, M6 (Minimum 12 mm, Maximum 16 mm)
• 55"
VESA MIS-F 200x200, M6 (Minimum 12 mm, Maximum 16 mm)
• 58"
VESA MIS-F 300x200, M6 (Minimum 18 mm, Maximum 22 mm)
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
4.3
Turn on TV
TV Stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com/TVsupport.
Use the model number of the TV to look for the Quick Start Guide to download.
Wall Mounting
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
Connect Power Cable
• Insert the power cable into the POWER connector on the back of the TV.
• Make sure the power cable is securely inserted in the connector.
• Make sure that the power plug, in the wall socket, is accessible at all times.
• When you unplug the power cable, always pull the plug, never pull the cable.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
7
On or Standby
Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Switch On
• Press the small joystick key on the back of the TV.
Switch to standby
To switch the TV to standby, press on the remote control. You can also press the small joystick key on the back of the TV.
In standby mode, the TV is still connected to the mains power but consumes very little energy.
To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
8
5
Connections
5.1
Connectivity guide
Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.
5.2
Antenna
Insert the antenna plug firmly into the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Copy protection
HDMI ports support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu­ray Disc. Also referred to as DRM (Digital Rights Management).
Component
Y Pb Pr - Component Video is a high quality
connection. The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals, add the Audio Left and Right signals for sound.
Match the YPbPr (green, blue, red) connector colors with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound.
5.3
Video Device
HDMI
An HDMI connection has the best picture and sound quality.
For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m, and also connect devices supporting HDR on HDMI 2 or HDMI 3.
Composite
CVBS - Composite Video is a standard time quality
connection. Next to the CVBS signal adds the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
9
5.4
Audio Device
HDMI ARC
Only HDMI 1 on the TV has HDMI ARC (Audio Return Channel).
If the device, typically a Home Theater System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV Picture to the HTS. The HDMI ARC connection combines both signals.
Headphones
You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm.
Headphones Detection
Off: The default setting is Off. Select Off for sound to be always available on the headphone output. You can adjust the headphones volume via the Headphones volume.
Auto: Select Auto for sound to automatically switch to headphones output when headphones are connected.
Headphones volume
Digital Audio Out - Optical
Audio Out - Optical is a high quality sound connection.
This optical connection can carry 5.1 audio channels. If your device, typically a Home Theater System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
Adjust the headphones volume separately when the headphones detection set to Off.
5.5
Mobile Device
Wi-Fi Direct / Miracast
About Wi-Fi Miracast
You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™. The mobile device and the TV should be within range, which usually means being in the same room.
Check if your mobile device is ready for Miracast. Your TV is a Wi-Fi CERTIFIED Miracast™ device.
10
With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), and share photos or anything else that's on the device screen. No need to connect the device to your home network. Both the TV and the device must be Wi-Fi CERTIFIED Miracast™ devices and have Miracast switched on.
Miracast on this TV is subject to the HDCP protocol and cannot display copy-protected premium content sent by a device. The maximum video resolution supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz Wi-Fi.
For more information on Wi-Fi CERTIFIED Miracast™ go to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.
Using Miracast Switch on Miracast
Press  SOURCES > Miracast Share a Screen on TV
1 - Activate Miracast (Screen mirroring) on your mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast.
Reset Wi-Fi Miracast connection
All previously connected devices are stored in the Wi­Fi Miracast list of connections.
To clear all connected Miracast devices…
(Home) > Settings > All settings > Network > Reset Wi-Fi Miracast connection.
Screen Delay
The normal delay when sharing a screen with Miracast is about 1 second. The delay might be longer if you are using older devices with less processing power.
MHL
This TV is MHL™ compliant. If your mobile device is also MHL compliant, you can
connect your mobile device with a MHL cable to the TV. With the MHL cable connected you can share what's on your mobile device on the TV screen. Your mobile device charges its battery at the same time. The MHL connection is ideal for watching movies or playing games from your mobile device on TV for a longer time.
Charging
With the MHL cable connected, your device will charge while the TV is switched on (not in standby).
Stop Sharing
You can stop sharing a screen from the TV or the mobile device.
From the device
With the application you use to start Miracast, you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme.
From the TV
To stop watching the screen of the device on TV, you can . . .
• press EXIT to watch a TV broadcast
• press (Home) to start another activity on TV
• press SOURCES to open the Sources menu and select a connected device.
MHL Cable
You need a passive MHL cable (HDMI to Micro USB) to connect your mobile device to the TV. You might need an extra adapter to connect to your mobile device. To connect the MHL cable to the TV use the HDMI 3 MHL connection.
MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC.
11
Apps - Philips TV Remote App
must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive.
With the TV Remote App, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. Look up what you want to watch on the TV Guide and watch it on your phone or TV. With the TV Remote App you can use your phone as a remote control*.
Download the Philips TV Remote App from your favorite app store today.
The Philips TV Remote App is available for iOS and Android and is free of charge.
* When use your phone as a remote control, TV cannot be switched on or off via your phone.
5.6
Other Device
USB Flash Drive
You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on.
To Pause
To pause a broadcast, you need a USB-compatible Hard Drive with a minimum of 4GB of disk space.
To Record
To pause and record a broadcast, you need a minimum of 250GB disk space. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive.
1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the formatting.
Follow the instructions on screen. When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press SOURCES and select USB.
For more information on watching or playing content from a USB flash drive, in Help, press the color key Keywords and look up Photos, Videos and
Music.
USB Hard Drive
Installation
If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (ISDB broadcast or similar).
Before you can pause or record a broadcast, you
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
To read the instructions, in Help, press the color key Keywords and look up USB Hard Drive.
Formatting
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. If you want to record broadcasts with TV Guide data from the Internet, you must setup the Internet connection first before you install the USB Hard Drive.
Warning
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
12
To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the formatting. Follow the instructions on screen. 4 - When the USB Hard Drive is formatted, leave it connected permanently.
13
6
Switch Source
6.1
Source List
• To open the sources menu, press SOURCES .
• To switch to a connected device, select the device with the arrows (left) or (right) and press OK.
• To close the source menu without switching to a device, press SOURCES again.
6.2
Rename Device
(Home) > Settings > All settings > General settings > Input sources
• To edit the input sources names from the source list.
1 - Select one of the device and press OK. 2 - Select Edit and press OK. 3 - Follow the on screen instructions to rename the
device name.
14
7
Channels
7.1
About Channels and Switch Channels
To watch TV channels
• Press . The TV tunes to the TV channel you last watched.
• Press (Home) > Watch TV > Channels and press OK.
• Press + or - to switch channels.
• If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.
• To switch back to the previously tuned channel, press BACK .
To switch to a channel from a channel list
• While watching a TV channel, press LIST to open the channel lists.
• The channel list can have several pages with channels. To view the next or previous page, press + or -.
• To close the channel lists without switching channels, press LIST again.
Channel icons
After an Automatic channel update of the channel list, newly found channels are marked with a (star). If you lock a channel, it will be marked with a (lock).
Radio channels
If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.
1 - Select Start now and press OK. 2 - Select Update channels to only add new digital
channels. 3 - Select Start and press OK to update channels. This can take a few minutes.
Quick reinstall (Home) > Settings > Install
Channels > Antenna/Cable Installation > Search for channels
1 - Select Start now and press OK. 2 - Select Quick reinstall to install all channels again
with default settings. 3 - Select Start and press OK to update channels. This can take a few minutes.
Advanced reinstall (Home) > Settings > Install
Channels > Antenna/Cable Installation > Search for channels
1 - Select Start now and press OK. 2 - Select Advanced reinstall to do a full re-
installation which takes you through each step. 3 - Select Start and press OK to update channels. This can take a few minutes.
Service Navigation
(Home) > Settings > Install Channels > Antenna/Cable Installation > Service navigation
• If the Service navigation is set to On, You can browse the primary and secondary channels by pressing channel   and  .
• If the Service navigation is set to Off, you can only browse the primary channels using channel   and  .
This TV can receive digital television standard time DVB. TV may not work properly with some operators of digital television , non-compliance with requirements of the standard in full.
7.2
Install Channel
Antenna/Cable Installation
Search for Channels Update channels
(Home) > Settings > Install Channels > Antenna/Cable Installation > Search for channels
Digital: Reception Test
(Home) > Settings > Install Channels > Antenna/Cable Installation > Digital: reception test
The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK. To enter a specific digital frequency yourself, use the remote control digit keys. Alternatively, select the frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK.
15
Antenna Connection
Upload a Channel List
(Home) > Settings > Install Channels > Antenna/Cable Installation > Antenna Connection
1 - Select Antenna or Cable, and press OK. 2 - Select Start and press OK. This can take a few
minutes.
Channel Logos
(Home) > Settings > All settings > Channels > Channel logos
In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off.
Channel List copy
Introduction
Channel list copy is intended for dealers and expert
users. With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV. Use a USB flash drive of minimum 1 GB.
Conditions
• Both TVs must be from the same year range.
• Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Copy a Channel List, Check Channel List Version
Copy a channel list to USB flash drive
(Home) > Settings > All settings > Channels > Expert mode settings > Channel list
copy > Copy to USB
To not Installed TVs
Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select language and country. You can skip the channel search. Finish the installation. 2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, press (Home) > Settings > All settings > Channels > Expert mode settings > Channel List Copy > Copy to TV and press OK. Enter your PIN code if necessary. 4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this setting, see chapter Re-install channels. Start this procedure until you reach the country setting. Press BACK to cancel the installation.) If the country is correct continue with step 2. If the country is not correct, you need to start a reinstallation. See chapter Re-install channels and start the installation. Select the correct country and skip the channels search. Finish the installation. When done, continue with step 2. 2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, press (Home) > Settings > All
settings > Channels > Expert mode settings > Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary. 4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive.
Check channel list version (Home) > Settings > All
settings > Channels > Expert mode settings > Channel list copy > Current version
Channel Options
Open Options
While watching a channel, you can set some options. Depending on the type of channel you are watching
or depending on the TV settings you made, some options are available.
16
To open the options menu…
1 - While watching a channel, press OPTIONS. 2 - Press OPTIONS again to close.
7.3
Channel List
Open Channel List
Audio Language
If none of the preferred audio languages are available, you can select another audio language if available. If no audio languages are available, you cannot select this option.
To read more information, in Help, press the color key Keywords and look up Audio Language.
Closed Caption
Switch Closed Caption On or Off with this options. Select On During Mute to show closed captions only when the sound is muted with .
Caption Service
Select the correct type of closed caption services. For more information, in Help, press Keywords and look up Closed Caption.
To open the current channel list…
1 - Press , to switch to TV. 2 - Press LIST to open the current channel list. 3 - Press OPTIONS > Select channel list, and
select one channel list you want to watch.
4 - Press  LIST again to close the channel list.
Channel List Options
Open Option Menu
To open the channel list option menu...
• Press , to switch to TV.
• Press LIST to open the current channel list.
• Press OPTIONS , and select one of options.
• Press LIST again to close the channel list.
Select Channel Filter
LIST > OPTIONS > Digital
Dual I-II
This option is available if an audio signal contains two audio languages, but one or both languages has no language indication.
Status
Select Status to view technical information on the channel or a connected device you are watching.
Universal Access
Only available when Universal access is set to On. (Home) > Settings > All settings > Universal
access > Universal access > On.
To read more information, in Help, press the color key Keywords and look up Universal Access.
Select one of channel combinations showing in the channel list.
Create or Edit Favorites Channel List
LIST > OPTIONS > Create favorites list Select a channel then press OK to add in a favorites
channel list, once completed, press Done. LIST > OPTIONS > Edit favorites Select a channel then press OK to add in or remove
from a favorites channel list, once completed, press
Done.
Select Channel Range
LIST > OPTIONS > Select channel range Select a range of channels in a favorites channel list,
once completed, press OK.
Select Channel List
LIST > OPTIONS > Select channel list Select a range of channels in a favorites channel list,
once completed, press OK.
17
Search Channels
Create a favorites List
LIST > OPTIONS > Search channel You can search for a channel to find it in a long list of
channels.
1 - Press , to switch to TV. 2 - Press LIST to open the current channel list. 3 - Press OPTIONS > Search channel, and
press OK. 4 - In the typing field, press OK to open on-screen keyboard, or press BACK to hide the on-screen keyboard. 5 - Use navigation keys to select a character, then press OK.
- Press (red) key to enter with lower-case
- Press (green) key to enter with upper-case
- Press (yellow) key to enter number and symbol
- Press (blue) key to delete a character
6 - Select Done when complete the editing. 7 - Press LIST again to close the channel list.
Lock or Unlock Channel
LIST > OPTIONS > Lock channel, Unlock channel
To prevent children from watching a channel, you can lock a channel. To watch a locked channel, you must enter the 4 digit Child Lock PIN code first. You cannot lock programmes from connected devices.
The locked channel will have next to the channel logo.
Remove Favorite List
LIST > OPTIONS > Remove favorite list To remove existing favorite list, select Yes.
1 - While watching a TV channel, press LIST to open the channel list.
2 - Select the channel, and press Mark as favorites to mark as favorite.
3 - The selected channel is marked with a . 4 - To finish, press BACK . The channels are
added to the Favorites list.
Remove Channel from the Favorites List
To remove a channel from the favorites list, select the channel with , then press Unmark as
favorites again to unmark as favorites.
Favorites List on TV Guide
You can link the TV Guide for your Favorite List. 1 - While watching a TV channel,
press LIST > OPTIONS > Select channel list. 2 - Select Antenna favorite or Cable Favorite, and press OK. 3 - Press TV GUIDE to open it.
With the TV Guide you can view a list of the current and scheduled TV programmes of your favorite channels. Along with your favorite channels, the first 3 most used channels from the broadcasters’ default list will be appended after your favourite channels for your preview. You need to add these channels into your favorite list to enable its operation (refer to "TV Guide" chapter).
On each page of TV Guide, there is a "Did you know" grid inserted on your favorite channel list. The "Did you know"-channel provides useful tips to improve the way you use your TV.
7.4
Favorite Channels
About favorite Channels
You can create a favorite channel list that only holds the channels you want to watch. With the Favorite channel list selected, you will only see your favorite channels when you switch through channels.
7.5
Closed Caption (CC) and Language
Closed Caption
You can display closed captions at all times or only when the TV is muted.
To open Closed Caption, press CC.
Note:
• Not all TV programmes, commercials, and features include closed captioning information. See your local
18
TV programme listings for channels with closed captions. The captioned programmes are typically listed with service marks, such as "CC," in the TV listings.
Switch on closed caption
1 - While you watch TV, press OPTIONS. 2 - Select Closed Caption > On and press OK.
On: the Closed caption is always on.
Off: the Closed caption is always off.
On during mute: the Closed caption is on only when the sound is muted with .
Note:
• When CC set to On, Ginga is Off.
• When CC set to Off, Ginga is On or Off.
• When CC set to On or On during mute, Ginga is Off.
• When Ginga set to On, CC is Off.
Select type of closed caption
1 - While you watch TV, press OPTIONS. 2 - Select Caption Service. 3 - Select the correct type of closed captions and
press OK.
7.6
Ginga
You can set Ginga to On or Off.
1 - Press (Home). 2 - Select Settings > All Settings > Channels
> Ginga and press OK.
3 - Select On or Off.
Audio Language
If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language.
1 - While you watch TV, press OPTIONS. 2 - For digital channels, select Audio Language. For
analog channels, select Alternate Audio. Press OK to confirm your selection. 3 - Select from the available languages, then press OK.
Note: If you have selected Alternate Audio for analog channels, select between:
Main: Primary audio language or
SAP: Secondary audio language
Menu Language
To change the language of the TV menus and messages…
1 - Press , select All settings > General settings > Language > Menu language and press OK.
2 - Select the language you want and press OK. 3 - Press (left) repeatedly if necessary, to close
the menu.
19
8
Change Day
TV guide
8.1
What You Need
With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analog and digital channels or only digital channels are shown. Not all channels offer TV guide information.
The TV can collect TV guide information for the channels that are installed on the TV (e.g. the channels you watch with Watch TV). The TV cannot collect the TV guide information for channels viewed from a digital receiver.
8.2
Using the TV Guide
Open the TV Guide
To open the TV guide, press TV GUIDE. Press TV GUIDE again to close.
If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press  - to go back to the previous day.
Alternatively, you can press OPTIONS and select Change day.
Set a Reminder
You can set a reminder for a programme. A message will alert you at the start of the programme. You can tune to this channel immediately.
In the TV Guide a programme with a reminder is marked with a (clock).
To set a reminder… 1 - Press TV GUIDE and select an upcoming
programme. 2 - Press Set reminder and press OK.
To clear a reminder… 1 - Press TV GUIDE and select a programme
with the reminder, which is marked with a (clock). 2 - Press Clear reminder, and select Yes, then press OK.
The first time you open the TV Guide, the TV scans all TV channels for programme information. This may take several minutes. TV guide data is stored on TV.
Tune to a Programme
Switch to a programme
• From the TV guide, you can switch to a current programme.
• To select a programme, use the arrow keys to highlight the programme name.
• Navigate to the right to view programmes scheduled later that day.
• To switch to the programme (channel), select the programme and press OK.
View programme details
To call up the details of the selected programme, press INFO .
Search by Genre
If the information is available, you can look up scheduled programmes by genre like movies, sports, etc.
To search for programmes by genre, press OPTIONS and select Search by genre. Select a genre and press OK. A list with the found programmes appears.
List of Reminders
You can view a list of the reminders you have set.
List of Reminders
To open the list of reminders…
1 - Press TV GUIDE. 2 - Press OPTIONS and select All reminders. 3 - In the list of reminders, select the reminder you
want to remove, the selected reminder is marked as . 4 - Press BACK , select Clear selected and press OK. 5 - Select Close to close the list of reminders.
20
Set a Recording
You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is
marked with . To see the recording list, press Recordings , a
programme set to be recorded is marked with a (red dot) before the programme's name.
To record a programme… 1 - Press TV GUIDE and select a future or
ongoing programme. 2 - Press the color key Record .
To cancel a recording… 1 - Press TV GUIDE and select the programme
set for recording. 2 - Press the color key Clear recording .
21
9
Watch a Recording
Recording and Pause TV
9.1
Recording
What You Need
You can record a digital TV broadcast and watch it later.
To record a TV programme you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on-screen TV Guide
• a reliable TV clock setting. If you reset the TV clock manually, recordings may fail.
You cannot record when you are using Pause TV. In terms enforcement of copyright legislation, some
DVB providers can apply different restriction by means of DRM (Digital Right Management) technology. In case of broadcasting protected channels, recording, record validity or number of views may be restricted. Recording may be completely prohibited. In case of trying to record a protected broadcasting or play back an expired recording, an error message can appear.
To watch a recording…
1 - Press TV GUIDE. 2 - Press the color key Recordings . 3 - In the list of recordings, select the recording you
want and press OK to start watching. 4 - You can use the keys (pause), (play), (rewind), (fast forward) or (stop). 5 - To switch back to watch TV, press EXIT.
9.2
Pause TV
What You Need
To pause a TV programme you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV guide
With the USB Hard Drive connected and formatted, the TV continuously stores the TV broadcast you are watching. When you switch to another channel, the broadcast of the former channel is cleared. Also when you switch the TV to standby the broadcast is cleared.
You cannot use Pause TV when you are recording.
Record a Programme
Record Now
To record the programme you are watching right now, press (Record) on the remote control. The recording will start immediately.
To stop recording, press (Stop). When TV Guide data is available, the programme you
are watching will be recorded from the moment you pressed the recording key until the programme ends.
• If you receive TV guide information from the Internet, you can adjust the end time of the recording in the pop-up window before you confirm the recording.
• If you receive TV guide information from the broadcaster, the recording starts immediately. You can adjust the end time of the recording in the list of recordings.
Pause a Programme
To pause and resume a broadcast…
• To pause a broadcast, press (Pause). A progress bar at the bottom of the screen appears briefly.
• To call up the progress bar, press (Pause) again.
• To resume watching, press (Play). With the progress bar on screen, press (Rewind)
or press (Forward) to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed.
To switch back to the actual TV broadcast, press (Stop).
22
Replay
Since the TV stores the broadcast you are watching, you can replay the broadcast for a few seconds.
To replay a current broadcast…
1 - Press (Pause) 2 - Press (Rewind). You can
press repeatedly to select from where you want to start viewing the paused broadcast. Press these keys repeatedly to change speed. At one point you will reach the start of the broadcast storage or the maximum time span.
3 - Press (Play) to watch the broadcast again. 4 - Press (Stop) to watch the broadcast live.
23
10
Photo Options
Videos, Photos and Music
10.1
From a USB Connection
You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive.
With the TV switched on, plug in a USB flash drive or a USB Hard Drive to one of the USB connections.
Press SOURCES, then select USB, you can browse your files in folder structure you have organized on the USB Hard Drive.
Warning
If you try to pause or record a programme with a USB Hard Drive connected, the TV will ask you to format the USB Hard Drive. This formatting will delete all current files on the USB Hard Drive.
With a photo on screen, press OPTIONS to…
List/Thumbnails
View photos with list view or thumbnails view.
Shuffle off, Shuffle on
View the pictures in sequential order, or at random.
Repeat, Play once
View the pictures repeatedly or once only.
Slideshow speed
Set the speed of the slideshow.
Slideshow transitions
Set the transition from one picture to the next.
10.3
Videos
Play Videos
To play a video on the TV… Select Videos , select the file name and
press OK.
10.2
Photos
View Photos
1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and press (right) to select the USB device you need. 3 - Select Photo, you can press Sort to browse your photos by date, month, year or alphabetically by name. 4 - Select one of photos, and press OK to view the selected photo.
• To view photos, select Photos in the menu bar, select a photo thumbnail and press OK.
• If there are several photos in the same folder, select a photo and press Slide show to start a slide show of all photos in this folder.
• Watch a photo and press INFO to show below: Progress bar, Playback control bar, (Jump to the previous photo in a folder), (Jump to the next photo in a folder), (Start slideshow playback), (Pause the playback), (Start slideshow), (Rotate photo)
• To pause the video, press OK. Press OK again to continue.
• To rewind or fast forward, press or . Press the keys several times to speed up to 2x, 4x, 8x, 16x, 32x.
• To jump to the next video in a folder, press OK to pause, then select on screen and press OK.
• To stop the video playback, press (Stop).
• To go back to the folder, press .
Open video folder
1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and press (right) to select the USB device you need. 3 - Select Videos and select one of video, you can press OK to play the selected video.
• Select a video and press INFO to show file information.
• Playback a video and press INFO to show below: Progress bar, Playback control bar, (Jump to the previous video in a folder), (Jump to the next video in a folder), (Playback), (Rewind), (Fast forward), (Pause the playback), (Play all/Play one), (Shuffle on/Shuffle off)
24
Video Options
During the video playback, press OPTIONS to… Subtitles
Display the subtitles if available, select On, Off, or On during mute.
Character set
Select one of system for character.
Audio language
Play the audio language if available.
Status
Display file information, like sound mode.
Repeat, Play once
Play videos repeatedly or once.
10.4
Music
Play Music
Open music folder 1 - Press SOURCES, select USB and
press OK. 2 - Select USB Flash Drive and press (right) to select the USB device you need. 3 - Select Music and select one of music, you can press OK to play the selected music.
• Select a music and press INFO to show file information.
• Playback a music and press INFO to show below: Progress bar, Playback control bar, (Jump to the previous music in a folder), (Jump to the next music in a folder), (Playback), (Rewind), (Fast Forward), (Pause the playback), (Play all/Play one)
Music Options
Options for playing music... Repeat, Play once
Play songs repeatedly or once.
25
11
the connected audio system.
Open TV Setting Menus
11.1
Home Menu Overview
Press (Home) to select one of below menus, then press OK.
Sources
This row contains available sources on this TV.
TV
This row contains TV functions available to the user.
Apps
This row contains number of apps pre-installed.
Search
This row contains an interface to perform the search within this TV.
Sleep timer - Set the TV to switch to standby automatically after a preset time. Screen off - If you only listen to music on TV, you can switch off the TV screen.
Picture settings - View Picture menu All settings - View all settings menu. Help - Diagnose and get more information about
your TV. For more information, in Help, press the color key Keywords and look up Help
Menu for more information.
All settings menu:
Press (home) key on the remote control, select Settings > All settings, and press OK.
11.3
All Settings
Picture Settings
Settings
This row contains settings available to the user. You can reorder the icons on Home menus. To
reposition icons, press OK. Alternatively, you can select the icon you want to reorder, and hold the OK key for 3 seconds until the arrows appear around the icon. Use navigation keys to move the highlighted icon to another location, then press OK. Press the BACK key to exit.
11.2
Frequent settings and All settings
Settings menu:
Press SETUP key on the remote control to find frequent settings.
How to - Instructions on how to install channels, sort channels, update TV software, connect external devices and use Smart functions on your TV. Install Channels - Update channels or start a complete new channel installation. Picture style - Select one of preset picture styles for ideal picture viewing. Picture format - Select one of preset picture format which fits the screen. Sound style - Select one of preset sound styles for ideal sound settings.
Audio out - Set the TV to play the sound on TV or on
Picture Style Select a style
For easy picture adjustment, you can select a preset picture style.
(Home) > Settings > Picture style, press OK to change to next available option.
The available Picture styles are ...
Personal - The picture preferences you set during the first start up
Vivid - Ideal for daylight viewing
Football - Ideal for watching sports
Standard - Most energy conscious setting
Movie - Ideal for watching movies
Game - Ideal for gaming*
Monitor - Ideal for computer monitor * Picture style - Game and Monitor are not available
for some video sources.
Custom a style
You can adjust and stored picture settings in in the currently selected picture style, like Color, Contrast or Sharpness.
Restore a style
To restore the style to its original setting, go to (Home) > Settings > All settings > Picture > Picture style, then press Restore style.
26
Connect HDMI devices supportings HDR on HDMI 1/HDMI 2/HDMI 3.
The styles for HDR content are...
HDR Personal
HDR Vivid
HDR Natural
HDR Movie
HDR Game
Color, Contrast, Sharpness, Brightness
of the picture. (NTSC only)
Color Settings
(Home) > Settings > All settings > Picture > Expert mode settings
Adjust the color enhancement (Home) > Settings > All
settings > Picture > Expert mode settings > Color enhancement
Adjust the picture color (Home) > Settings > All
settings > Picture > Color
Press the arrows (up) or (down) to adjust the color saturation value of the picture.
Adjust the picture contrast (Home) > Settings > All
settings > Picture > Contrast
Press the arrows (up) or (down) to adjust the contrast value of the picture.
You can decrease contrast value to reduce power consumption.
Adjust the picture sharpness (Home) > Settings > All
settings > Picture > Sharpness
Select Maximum, Medium, or Minimum to set the level of the color intensity and the details in bright colors.
Select the preset color temperature (Home) > Settings > All
settings > Picture > Expert mode settings > Color temperature
Select Normal, Warm, or Cool to set the color temperature for your preference.
Customise color temperature (Home) > Settings > All
settings > Picture > Expert mode settings > Color temperature > Custom color temperature
Select Custom in Color temperature menu to customise a color temperature yourself. Press the arrows (up) or (down) to adjust the value.
Press the arrows (up) or (down) to adjust the sharpness value of the picture.
Adjust the picture brightness (Home) > Settings > All
settings > Picture > Brightness
Press the arrows (up) or (down) to set the level of brightness of the picture signal.
Note: Setting of brightness much away from reference value (50) may result lower contrast.
Expert mode picture settings
Tint
(Home) > Settings > All settings > Picture > Expert mode settings > Tint
With Tint, you can adjust the level of tint in fine detail
Contrast Settings
Contrast Modes
(Home) > Settings > All settings > Picture > Expert mode settings > Contrast
mode
Select Normal, Optimized for picture, Optimized for energy saving to set the TV automatically reduces
the contrast, for best power consumption or for best picture experience, or select Off to switch off the adjustment.
HDR Plus
(Home) > Settings > All settings > Picture > Expert mode settings
Set HDR Plus to Off, Minimum, Medium,
27
Maximumor Automatic to set the level at which the TV automatically shows superior contrast and brightness effect for HDR content.
Note: Available when HDR (High-Dynamic Range) signal is detected.
• The TV can play HDR programmes* from HDMI 1/HDMI 2/HDMI 3 connections, broadcasting, from an Internet source (e.g. Netflix) or from a connected USB memory device.
* Only HDR10 and Hybrid Log Gamma HDR are supported
Picture Clean
Noise reduction
(Home) > Settings > All settings > Picture > Expert mode settings > Noise reduction
Select Maximum, Medium, Minimum to set the level for removing the noise in video content. Noise is mostly visible as small moving dots in on­screen picture.
MPEG artifact reduction
Dynamic Contrast
(Home) > Settings > All settings > Picture > Expert mode settings > Dynamic contrast
Select Maximum, Medium, or Minimum to set the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture.
Video Contrast, Gamma Video contrast
(Home) > Settings > All settings > Picture > Expert mode settings > Video contrast
Press the arrows (up) or (down) to adjust the video contrast level.
Gamma (Home) > Settings > All
settings > Picture > Expert mode settings > Gamma
Press the arrows (up) or (down) to set a non­linear setting for picture luminance and contrast.
(Home) > Settings > All settings > Picture > Expert mode settings > MPEG artifact reduction
Select Maximum, Medium, Minimum to have different degrees of smoothing the artifacts in digital video content. MPEG artifacts are mostly visible as small blocks or jagged edges in on-screen images.
Motion Settings
Motion Styles
(Home) > Settings > All settings > Picture > Expert mode settings > Motion styles
Motion styles provides optimized motion setting modes for different video content.
Select Off to switch off or select one of the motion styles to have better viewing experience. (Movie, Sports, Standard, Smooth or Personal)
Not available for below cases:
(Home) > Settings > All settings > Picture style > Game.
• Network/Internet streaming Ultra HD 50Hz/60Hz videos.
Ultra Resolution
(Home) > Settings > All settings > Picture > Expert mode settings > Ultra resolution
Select On to have a superior sharpness in line edges and details.
Natural Motion
(Home) > Settings > All settings > Picture > Expert mode settings > Natural Motion
Natural Motion makes any movement smooth and fluent.
• Select Maximum, Medium, Minimum to have different degrees for reducing the motion judder, visible in movies on TV.
• Select Minimum or Off when noise appears in playing moving picture on-screen.
Note: Only available when Motion styles set
28
to Personal.
Sound Settings
Picture Format
 (Home) > Settings > All
settings >
If the picture is not filling the whole screen, if black bars are showing on the top or bottom or at both sides, you can adjust the picture to fill the screen completely.
To select one of the basic settings to fill the screen…
Wide screen – automatically zooms in the picture to wide screen.
Fill screen – automatically enlarges the picture to fill the screen. Picture distortion is minimal, subtitles remain visible. Not suitable for PC input. Some extreme picture formats may still show black bars.
Fit to screen – automatically zooms in the picture to fill the screen without distortion. Black bars may be visible. Not supported for PC input.
Original – shows the original format of the incoming picture.
(Home) > Settings > All settings > Picture > Picture format > Advanced
To format the picture manually…
Picture > Picture format
Sound Style Select a style
For easy sound adjustment, you can select a preset sound style.
(Home) > Settings > All settings > Sound > Sound style
The available sound styles are ...
Original - Most neutral sound setting
Movie - Ideal for watching movies
Music - Ideal for listening to music
Game - Ideal for gaming
News - Ideal for speech
Expert mode - Select to check more advanced sound settings
Custom a style
You can adjust and stored sound settings in the currently selected sound style.
Restore a style
To restore the style to its original setting, select back to Sound style, then press Restore style.
Shift – select on the arrows to shift the picture. You can only shift the picture when it is zoomed in.
Zoom – select on the arrows to zoom in.
Stretch – select on the arrows to stretch the picture vertically or horizontally.
Undo – select to return to the picture format you started with.
Quick Picture Settings
 (Home) > Settings > All
settings >
• During the first installation, you did some picture settings in a few easy steps. You can redo these steps with Quick picture settings menu.
• Select the picture setting you prefer and go to the next setting.
• To do these steps, make sure the TV can tune to a TV channel or can show a programme from a connected device.
Picture >
Quick picture settings
Expert mode sound settings Dynamic surround
(Home) > Settings > All settings > Sound > Expert mode settings > Dynamic surround
Set the surround sound effect level for the internal TV speakers.
Clear dialogue (Home) > Settings > All
settings > Sound > Expert mode settings > Clear dialogue
Select On to improve the sound for speech. Ideal for news programmes.
Equalizer (Home) > Settings > All
settings > Sound > Expert mode settings > Equalizer
Press the arrows (up) or (down) to adjust the equalizer settings.
29
TV Placement
(Home) > Settings > All settings >
Sound
> TV
placement
Select On a TV stand or On the wall to have best sound reproduction according to the setting.
Advanced Sound Settings
Volume Control Auto volume
(Home) > Settings > All settings > Sound > Advanced > Auto volume
Select AVL to automatically level out sudden volume differences. Typically when you are switching channels. Select Night mode for a more comfortable quiet listening experience.
Delta volume (Home) > Settings > All
settings > Sound > Advanced > Delta volume
Press the arrows (up) or (down) to adjust the delta value for TV speaker volume.
Set the audio out signal of the TV to fit the sound capabilities of the connected Home Theatre System.
Stereo: If your audio playback devices have no multichannel sound processing, select to only output stereo content to your audio playback devices.
Multichannel: Select to only output 5.1 audio content (compressed multichannel sound signal) to your audio playback devices.
Multichannel (bypass): Select to send original bitstream from HDMI ARC to the connected HDMI Sound System.
Dolby Digital Plus: Select to output Dolby Digital Plus or DTS content to your audio playback devices or Home theater system.
- Make sure your audio playback devices support Dolby Atmos feature.
- SPDIF output (DIGITAL AUDIO OUT) will be disabled when streaming Dolby Digital Plus content.
Digital out leveling (Home) > Settings > All
settings > Sound > Advanced > Digital out leveling
Adjust the loudness level from device which is connected to digital audio output (SPDIF) or HDMI.
• Select More to have louder volume.
• Select Less to have softer volume.
Audio Out Settings
(Home) > Settings > All settings > Sound > Advanced > Audio out
Set the TV to play the sound on TV or on the connected audio system.
You can select where you want to hear the TV sound and how you want to control it.
• If you select TV speakers off, you permanently switch off the TV speakers.
• If you select TV speakers, the TV speakers are always on.
With an audio device connected with HDMI CEC, select HDMI sound system. The TV will switch off the TV speakers when the device is playing the sound.
Digital Output Settings
Digital output settings are available for SPDIF output (optical) and HDMI ARC sound signals.
Digital out format
Digital out delay (Home) > Settings > All
settings > Sound > Advanced > Digital out delay
For some Home Theater Systems you might need to adjust the audio sync delay to synchronize the audio to the video. Select Off if a sound delay is set on your Home Theater System.
Digital out offset (Only available when Digital out delay set to On)
(Home) > Settings > All settings > Sound > Advanced > Digital out offset
• If you cannot set a delay on the Home Theater System, you can set the TV to sync the sound.
• You can set an offset that compensates for the time necessary for the Home Theater System to process the sound of the TV picture.
• You can set the value in steps of 5ms. Maximum setting is 60ms.
(Home) > Settings > All settings > Sound > Advanced > Digital out format
30
General Settings
Connection Related Settings
Viera Link. Not all brands are fully compatible with EasyLink. Example HDMI CEC branding names are property of their respective owners.
USB Hard Drive
(Home) > Settings > All settings > General settings > Format USB Hard Drive
You need to set up and format a USB Hard Drive before you record a channel.
USB Keyboard Settings
(Home) > Settings > All settings > General settings > USB keyboard settings
To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection.
Mouse Settings
(Home) > Settings > All settings > General settings > Mouse settings
Adjust the motion speed of the USB mouse.
Input Sources
(Home) > Settings > All settings > General settings > Input sources
• To edit the input sources names from the source list.
1 - Select one of the device and press OK. 2 - Select Edit and press OK. 3 - Follow the on screen instructions to rename the
device name.
HDMI Ultra HD
(Home) > Settings > All settings > General settings > Input sources > HDMI 2/3 > HDMI Ultra HD
This TV can display Ultra HD signals. Some devices ­connected with HDMI - do not recognize a TV with Ultra HD and might not work correctly or show distorted picture or sound.
To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection.
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched on on the TV and the connected device.
Switch on EasyLink (Home) > Settings > All settings > General
settings > EasyLink > EasyLink > On
Operate HDMI CEC-compatible devices with TV remote control
(Home) > Settings > All settings > General settings > EasyLink > EasyLink remote control > On
Note:
• The setting Optimal allows maximum up to Ultra HD (50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2 signals.
• The setting Standard allows maximum up to Ultra HD (50Hz or 60Hz) YCbCr 4:2:0 signals.
• The setting Off is to watch videos with Full HD.
Supported format for HDMI Ultra HD options:
• Resolution: 3840 x 2160
• Frame rate (Hz): 50Hz, 59.94Hz, 60Hz
• Video data sub-sampling (bit-depth)
- 8 bit: YCbCr 4:2:0, YCbCr 4:2:2*, YCbCr 4:4:4*, RGB 4:4:4*
- 10 bit: YCbCr 4:2:0*, YCbCr 4:2:2*
- 12 bit: YCbCr 4:2:0*, YCbCr 4:2:2* * Supported only when HDMI Ultra HD is set
to Optimal.
Eco Settings Set energy saving level
- EasyLink might not work with devices from other brands.
- The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theater Sync, Kuro Link, Simplink and
(Home) > Settings > All settings > General settings > Eco settings > Energy saving
Select Minimum, Medium, or Maximum to have different degrees for energy saving, or select Off to switch off energy saving mode.
31
Set screen off to save energy consumption (Home) > Settings > All settings > General
settings > Eco settings > Screen off
Select Screen off, the TV screen is switched off, to switch the TV screen back on, press any key on the remote control.
Set TV switch off timer (Home) > Settings > All settings > General
settings > Eco settings > Switch off timer
Press the arrows (up) or (down) to adjust the value. The value 0 (Off) deactivates the automatic switch off.
Select Switch off timer, the TV switches off automatically to save energy.
• TV switches off if receiving a TV signal but you don't press a key on the remote control during a 4 hour period.
• TV switches off if not receiving a TV signal nor a remote control command for 10 minutes.
• If you use the TV as a monitor or use a digital receiver to watch TV (a Set-Top Box - STB) and you do not use the remote control of the TV, you should deactivate this automatic switch off, to set the value to 0.
Redo full TV installation , and set TV status back to the first time you switch on
(Home) > Settings > General settings > Reinstall TV
Enter PIN code and select Yes, the TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minute
Region and Language Settings
Language
(Home) > Settings > All settings > Region and language > Languages
Change the language of the TV menu and messages
(Home) > Settings > All settings > Region and language > Languages > Menu language
Clock
(Home) > Settings > All settings > Region and language > Clock
Location - Home or Shop
(Home) > Settings > All settings > General settings > Location
• Select the location of your TV
• Select Shop, the picture style is switched back to Vivid, and can adjust shop settings.
• Shop mode is for in-store promotion.
Shop Setup
(Home) > Settings > All settings > General settings > Shop setup
If the TV is set to Shop, you can view feature logos or set the availability of a specific demo for in store use.
Reset TV Settings and Reinstall TV Reset all settings value to original TV settings
(Home) > Settings > General settings > Factory settings
Correct clock automatically (Home) > Settings > All settings > Region and
language > Clock > Auto clock mode
• The standard time setting for the TV clock is Automatic. The time information comes from the broadcasted UTC - Coordinated Universal Time information.
Correct clock manually (Home) > Settings > All settings > Region and
language > Clock > Auto clock mode > Manual (Home) > Settings > All settings > Region and
language > Clock > Date, Time
Go to previous menu, and select Date and Time to adjust the value.
Note:
• If none of the automatic settings display the time correctly, you can set the time manually.
• If you schedule recordings from the TV Guide, we recommend not to change the time and date manually.
Set time zone or set a time offset for your region
32
(Home) > Settings > All settings > Region and language > Clock > Time zone
Lock Settings
Select one of the time zones.
Set the TV to switch to Standby automatically after a preset time
(Home) > Settings > All settings > Region and language > Clock > Sleep timer.
Set the TV to switch to Standby automatically after a preset time. With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off. You can always switch off your TV earlier or reset the time during the countdown
Universal Access Settings
(Home) > Settings > All settings > Universal access
With Universal Access switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people.
Switch on universal access settings
Set Code and Change Code
(Home) > Settings > All settings > Child lock > Set code or Change code
Set new code or reset change code. The child lock code is used to lock or unlock channels or programmes.
Note: If you forgot your PIN code, you can override the current code use 8888 and enter a new code.
Age Rating
(Home) > Settings > All settings > Child lock > Age ratings lock
To prevent children from watching a programme not suitable for their age, you can set a minimum age to watch rated programmes.
Digital channels can have their programmes age rated. When the age rating of a programme is equal to or higher than the age you have set as age rating for your child, the programme will be locked. To watch a locked programme, you must enter the Child lock code first.
(Home) > Settings > All settings > Universal access > Universal access > On.
Universal access for blind or partially sighted people
(Home) > Settings > All settings > Universal access > Audio description > Audio description > On
Digital TV channels can broadcast special audio commentary describing what is happening on screen.
(Home) > Settings > All settings > Universal access > Audio description > Audio description > Mixed volume, Audio effects, Speech
• Select Mixed volume, you can mix the volume of the normal audio with the audio commentary. Press the arrows (up) or (down) to adjust the value.
• Set Audio effect to On for extra audio effects in the commentary audio, like stereo or fading sound.
• Select Speech to set speech preference, Descriptive or Subtitles.
Content Rating
(Home) > Settings > All settings > Child lock > Content ratings lock
To prevent children from watching a programme not suitable for them, you can set a lock to block the rated programmes.
Digital channels can have their programmes rated by content. To watch a locked programme, you must enter the Child lock code first.
33
12
Network
12.1
Home Network
To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet.
Connect the TV to a home network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your network router.
12.2
Connect to Network
select OK to connect immediately.
3 - A message will be shown when the connection is successful.
Make the Connection - WPS (Home) > Settings > All
settings > Network > Connect to network > WPS
If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
1 - Go to the router, press the WPS button and return to the TV within 2 minutes.
2 - Select Connect to make the connection. 3 - A message will be shown when the connection is
successful.
Wireless Connection
What You Need
To connect the TV to the Internet wirelessly, you need a Wi-Fi router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet.
Turn Wi-Fi On or Off
(Home) > Settings >
On/Off
All settings
> Network > Wi-Fi
Make the Connection - WPS with PIN Code (Home) > Settings > All
settings > Network > Connect to network > WPS with PIN Code
If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
1 - Write down the 8-digit PIN code shown on screen and enter it in the router software on your PC. Consult the router manual on where to enter the PIN code in the router software.
2 - Select Connect to make the connection. 3 - A message will be shown when the connection is
successful.
Wired Connection
What You Need
Make the Connection Make the Connection - Wireless
(Home) > Settings > All settings > Network > Connect to network > Wireless
1 - In the list of found networks, select on your wireless network. If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select Add New Network to enter the network name yourself. 2 - Depending on the type of router, enter your encryption key - WEP, WPA or WPA2. If you entered the encryption key for this network before, you can
To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet.
34
Make the Connection (Home) > Settings > All
settings > Network > Connect to network > Wired
1 - Connect the router to the TV with a network cable (Ethernet cable**).
2 - Make sure that the router is turned on. 3 - The TV constantly searches for the network
connection. 4 - A message will be shown when the connection is successful.
If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on.
**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.
1 - Select Static IP configuration and configure the connection.
2 - You can set the number for the IP Address, Netmask, Gateway, DNS 1, or DNS 2.
Switch On with Wi-Fi (WoWLAN) (Home) > Settings > All
settings > Network > Switch On with Wi-Fi (WoWLAN)
You can switch this TV on from your smartphone or tablet if the TV is in Standby. The setting Switch On
with Wi-Fi (WoWLAN) must be switched on.
Digital Media Renderer - DMR (Home) > Settings > All
settings > Network > Digital Media Renderer ­DMR
If your media files do not play on your TV, make sure that the Digital Media Renderer is turned on. As a factory setting, DMR is turned on.
Switch on Wi-Fi connection (Home) > Settings > All
settings > Network > Wi-Fi On/Off
You can switch on or off Wi-Fi connection on your TV.
12.3
Network settings
View Network Settings (Home) > Settings > All
settings > Network > View network settings
You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc.
Network Configuration - Static IP (Home) > Settings > All
settings > Network > Network Configuration > Static IP
If you are an advanced user and want to install your network with Static IP addressing, set the TV to Static
IP.
Network Configuration - Static IP Configuration (Home) > Settings > All
settings > Network > Static IP configuration
Reset Wi-Fi Miracast connection (Home) > Settings > All
settings > Network > Reset Wi-Fi Miracast connection
Clear the list of connected and blocked devices that are used with Miracast.
TV network name (Home) > Settings > All
settings > Network > TV network name
If you have more than one TV in your home network, you can give the TV a unique name.
Netflix settings (Home) > Settings > All
settings > Network > Netflix settings
With Netflix settings, you can view the ESN number or deactivate a Netflix device.
Clear Internet Memory
35
(Home) > Settings > All settings > Network > Clear Internet Memory
With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery favorites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
12.4
Interactive TV settings
This takes you to the Viewing data settings where you can enable or disable the collection of your viewing data by Samba TV and provides access to the Samba TV's Privacy policy that explains how viewing Data is collected (if you enable collection) and used.
36
13
13.3
Smart TV
13.1
Setup Smart TV
The first time you open Smart TV, you need to configure your connection. Read and agree to the terms and conditions to continue.
The Smart TV start page is one of your link to the Internet.
Open Smart TV
To open the Smart TV start page, press Smart TV . Alternatively, you can press (Home) > Apps, select Smart TV and press OK.
The TV connects to the Internet and opens the Smart TV start page. This may take a few seconds.
Close Smart TV
To close the Smart TV start page, press EXIT. TP Vision Europe B.V. bears no responsibility
regarding the content and the quality of the content provided by the content service providers.
App Gallery
Open the App gallery in home screen to browse the Apps, the collection of tailored websites for TV.
Find the App for YouTube videos, a national newspaper, an online photo album, etc. There are Apps to rent a video from an online video store and Apps for watching programmes you missed. If the App gallery does not have what you are looking for, try the World Wide Web and surf the Internet on your TV.
Search
With Search, you can search the App gallery for relevant Apps. Enter a keyword in the text field, select and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories. In the list of found keywords, select a keyword and press OK to search for items with that keyword.
13.2
Smart TV Start Page
Your Apps
You start Apps from the Smart TV start page.
Internet
The Internet App opens the World Wide Web on your TV. On your TV, you can view any Internet website but most of them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not available on your TV.
- Internet pages are shown one page at a time and full screen.
Recommended Apps
In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores. You can select and open them from the Recommended Apps window.
37
14
Netflix
If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet.
To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
www.netflix.com
38
15
Environmental
15.1
Energy Label
The Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TVsupport
15.2
a long period of time. (ii) Do not mix batteries (old batteries with new batteries or regular batteries with alkaline batteries, etc.) (iii) Do not expose products containing batteries/cells to high temperatures.
• Batteries and cells disposed of and received by Envision-approved Service Centers will be taken to an ecologically-sound destination.
• If you have any queries or questions, please call +55 (11) 2938 0245 (Greater São Paulo) and +55 800 701 0245 (other regions and states) or go to
http://www.philips.com.br.
DISPOSAL OF BATTERIES AND CELLS
End of Use
Disposal of your old product and batteries
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Batteries and Cells
After use, batteries and/or cells should be taken to the business establishment or approved service center network.
Linha Verde automated telephone system
If you have any queries about the environment and sustainability, please contact Linha Verde on +55 (92) 2126 8977. Envision and the environment thank you for your cooperation.
WARNING: Take care when handling and disposing of batteries and cells.
• Do not dispose of batteries and cells in your general household waste.
• Improper disposal of batteries and cells can pose a risk to health and the environment.
• To help protect our health and the environment, Envision provides collection points at its Service Centers.
• To prevent leakage from batteries or cells, which can cause damage to health, the environment and to the product, we recommend the following: (i) Remove batteries from remote controls if they are not used for
39
16
HDMI
Specifications
16.1
Power
Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport
Power
• Mains power: AC 110-240V +/-10%
• Ambient temperature: 5°C to 35°C
• Power saving features: Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu.
16.2
Reception
• Antenna input: 75 ohm coaxial (F-type)
• Tuner bands: Hyperband, UHF, VHF
• ISDBT
• Analogue video playback: PAL
• Digital video playback: MPEG2 SD/HD (ISO/IEC 13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC*
• Digital audio playback (ISO/IEC 13818-3)
16.3
Display Resolution
• 480i - 60Hz
• 480p - 60Hz
• 576i - 50Hz
• 576p - 50Hz
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• 3840 x 2160p - 24Hz, 25Hz, 30Hz
• 3840 x 2160p - 50HZ, 60Hz (HDMI 2, HDMI 3)
HDMI - UHD
(Home) > Settings > All settings > General settings > Input sources > HDMI 2/3 > HDMI Ultra HD
This TV can display Ultra HD signals. Some devices ­connected with HDMI - do not recognize a TV with Ultra HD and might not work correctly or show distorted picture or sound.
To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection.
• The setting Optimal* allows maximum up to Ultra HD (50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0 signals.
• The setting Standard allows maximum up to Ultra HD (50Hz or 60Hz) YCbCr 4:2:0 signals.
• The setting Off is to watch videos with Full HD.
Diagonal screen size
• 50PUx6513: 126 cm / 50 inch
• 55PUx6513: 139 cm / 55 inch
• 58PUx6513: 146 cm / 58 inch
Display resolution
• 3840 x 2160
16.4
Supported Input Resolution ­Video
Support Timing
Video support timing also includes field/frame rate
23.976Hz, 29.97Hz and 59.94Hz.
* Available when Source is set to HDMI 2 or HDMI 3
Component, Composite
Composite
• PAL, NTSC
Component
• 480i
• 480p
• 576i
• 576p
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 50Hz, 60Hz
40
16.5
16.8
Supported Input Resolution ­Computer
• 640 x 480 - 60Hz, 72Hz, 75Hz, 85Hz
• 800 x 600 - 60Hz, 72Hz, 75Hz, 85Hz
• 1024 x 768 - 60Hz, 70Hz, 75Hz
• 1280 x 768 - 60Hz
• 1280 x 800 - 60Hz
• 1280 x 960 - 60Hz
• 1280 x 1024 - 60Hz
• 1360 x 768 - 60Hz
• 1366 x 768 - 60Hz
• 1440 x 900 - 60Hz
• 1680 x 1050 - 60Hz
• 1920 x 1080 - 60Hz
• 1920 x 1200 - 60Hz
• 3840 x 2160 - 60Hz
16.6
Sound
Connectivity
TV Side
• USB 2 - USB 2.0
• HDMI 3 in - MHL - UHD - HDR
• Headphones - Stereo mini-jack 3.5mm
TV Rear
• YPbPr - Y Pb Pr, Audio L/R
• CVBS - CVBS, Audio L/R (Shared with YPbPr)
TV Bottom
• USB 1 - USB 3.0
• Digital Audio out - Optical
• Network LAN - RJ45
• Antenna (75 ohm)
• HDMI 1 in - ARC - UHD
• HDMI 2 in - UHD - HDR
• Dynamic Surround
• Clear Dialogue
• Smart Sound
• 5 Band Equalizer
• Output power (RMS): 20W
• Dolby Audio ™
• DTS® (M6)
16.7
Multimedia
Connections
• USB 2.0/USB 3.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11n (built-in)
Supported USB file systems
• FAT, NTFS
Playback formats
• Video Codec: AVI, MKV, HEVC, H.264/MPEG-4 AVC, MPEG1, MPEG2, MPEG4, VP9
• Audio Codec: MP3, WAV, AAC, WMA (v2 up to v9.2), WMA-PRO (v9 and v10)
• Subtitles:
- Format: SRT, SMI, SSA, SUB, ASS, TXT
• Image Codec: JPEG, GIF, PNG, BMP
Wi-Fi Certified
This TV supports Miracast certified devices. Performance may vary, depending on the capabilities
of the mobile device and the software used.
41
17
Troubleshooting
17.1
Tips
If you can't find a solution for your TV problem in Troubleshooting, you can use Keywords in Help > User manual to find the information you are looking for. Select a keyword to go the most relevant page in the User manual.
If the User manual doen't answer your question, you can go to the support website of Philips.
To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number.
Go to www.philips.com/TVsupport. On the support site you can find your country's
telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer.
For more TV troubleshooting and frequently asked questions (FAQs)...
Go to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or computer. Alternatively, you can print the relevant Help page from your computer. To download the Help (user manual) go to www.philips.com/TVsupport
respond to the remote control.
Creaking sound at startup or switch off
When you are turning the TV on or standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance.
The TV goes back to standby after showing the Philips startup screen
When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behavior. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press (Standby / On) the remote control or the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care. In Help > User manual, press the color key Keywords and look up Contact Info.
TV switches off by itself If the TV switches off suddenly, the setting switch off
timer might be switched on. With switch off timer the TV switches off after 4 hours if no remote
control signals were received. To avoid this automatic switch off, you can deactivate this switch off. In Help > User manual, press the color key Keywords and look up switch Off Timer. Also, if the TV does not receive a TV signal nor a remote control command for 10 minutes, the TV switches off automatically.
17.3
Remote Control
17.2
Switch On
The TV does not switch on
• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. Try switching on again.
• Connect the TV to another wall mains socket and try switching on.
• Disconnect all connected devices from the TV and try switching on.
• If the standby light on TV is on, the TV might not
TV does not respond to the remote control
• The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behavior.
• The batteries of the remote control might be empty. Replace the batteries with new ones.
42
17.4
Channels
No digital channels found during the installation
• Check if the TV was connected with an antenna or is using a provider signal. Check the cable connections.
• Check if the country where you install the TV, has digital channels available.
• Check if you selected the correct broadcast system.
• Redo the installation and check if you select the correct country and system.
No analog channels found during the installation
• Check if the TV was connected with an antenna. Check the cable connections.
• Check if you selected the correct broadcast system.
• Redo the installation and select Digital and Analog
Channels during the installation. Some channels disappeared, cannot find all or some
previously installed channels
• Check if you selected the correct Channel list or Favorites list you normally use.
• Some channels might be moved or even deleted by the broadcaster. In the normal channels list, try to search for the channel you're missing. If the channel is still available, you can put it back in the favorites list.
• A channel can be deleted from the channel list during Automatic channel update. These automatic updates are done overnight if the TV is on standby. Channels that do not exist anymore are deleted and new channels will be added to the channel list. Exceptionally, a channel can be deleted because the TV could not find it while checking for its presence. It might not broadcast at night. To avoid channels being deleted during the Automatic channel update because the TV could not find them although these channels are still there, you can switch off Automatic channel update.
(Home) > Settings > All Settings > Channels > Antenna/Cable Installation > Automatic channel update
settings > Picture > Picture style
• To check if the TV is broken, try to play a video clip. Press Settings > Help > Check the TV. If the video clip stays black, call Philips. Wait until the clip ends and select Contact info in the Help menu. Call the telephone number for your country.
Sound but no picture
• Change to other video sources and then change back to current source.
• Select Picture style and select a style and press OK.
(Home) > Settings > All settings > Picture > Picture style
• Restore picture style, select back to Picture style, then press Restore style.
• Reset all TV settings, go to (Home) > Settings > All settings > General settings > Reinstall TV.
• Check the connections of the source/input devices.
Poor reception
If the TV picture is distorted or variable in quality, the input signal might be poor. A weak digital signal is seen as a picture that is breaking up in square blocks and freezes occasionally. Much sooner than a bad analog signal, a bad digital signal will fall away.
• Check if the antenna cable is properly connected.
• Large loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality when you are using an antenna. Try to improve the reception by changing the antenna direction or moving devices away from the TV. Bad weather might deteriorate the reception.
• Check if all connections, to and from your devices, are properly connected.
Poor picture from a device
• Make sure that the device is connected properly. Make sure that the device's output video setting is the highest possible resolution if applicable.
• Restore picture style or change to another picture style.
Picture settings change after a while
17.5
Picture
No picture / distorted picture
• Check if the TV is connected with an antenna or is using a provider signal. Check the cable connections.
• Check if the correct source/input is selected in the sources menu. Press Sources and select the source/input you need.
• Check if the the external device or source is properly connected.
• Check if the reception is poor.
• Check if the picture is set to a minimal value. Select Picture style and select a style and press OK.
(Home) > Settings > All
Make sure that Location is set to Home . You can change and save settings in this mode.
(Home) > Settings > All settings > General settings > Location
A banner appears
If an on screen promotion banner appears occasionally or the Picture style automatically switches back to Vivid at startup, the TV is in Shop location. Set the TV to Home location for use at home.
(Home) > Settings > All settings > General settings > Location
Picture does not fit the screen / Wrong or unstable picture size / Picture position is incorrect
• If the picture size - its aspect ratio - does not fit the
43
screen, with black bars on the top and bottom or left and right side of the screen, press Picture Format > Fill screen.
• If the picture size changes all the time, press Picture Format > Fit to screen.
• If the position of the picture is incorrect on the screen, try to check the signal resolution and output type of the connected device, press Picture
Format > Original. Computer picture is not stable
Make sure that your PC uses the supported resolution and refresh rate.
17.6
Sound
No sound or poor sound quality
• Check if the sound settings of the TV are OK, press the volume or mute key.
• If you use a digital receiver (set-top box), check if the volume on this receiver is not set to zero or mute.
• Check if the TV - the audio signal - is properly connected with the Home Theater System, if you use such a system for the TV sound. Check if you connected the HDMI cable to an HDMI1 ARC connection on the Home Theater System.
• Make sure that the TV audio output is connected to the audio input on the Home Theater System. Sound should be heard from the HTS (Home Theater System) speakers.
Sound with loud noise
If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theater System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theater System has no DTS sound processing. You can fix this by setting the Digital out format of the TV to Stereo. Press (Home) > Settings > All settings > Sound > Advanced > Digital out format
malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection. If the picture and sound of a device connected with HDMI is distorted, check if a different HDMI Ultra
HD setting can solve this problem. In Help > User manual, press the color key Keywords and look
up HDMI Ultra HD.
• If there are intermittent sound disruptions, make sure that output settings from the HDMI device are correct.
HDMI EasyLink does not work
• Check if your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible.
No volume icon shown
• When an HDMI-CEC audio device is connected and you use the TV Remote Control to adjust the volume level from the device, this behavior is normal.
17.8
USB
Photos, videos and music from a USB device do not show
• Check if the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation.
• Check if the USB storage device is compatible with the TV.
• Check if the audio and picture file formats are supported by the TV. For more information, in Help, press the color key Keywords and look up Multimedia.
Choppy playback of USB files
• The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback.
17.9
17.7
HDMI - UHD
HDMI
• Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from an HDMI device.
• If the TV does not recognize the HDMI device and no picture is displayed, switch the source from one device to another and back again.
• This is an Ultra HD TV. Some older devices ­connected with HDMI - do not recognize an Ultra HD TV electronically and might not work correctly or show distorted picture or sound. To avoid the
Wi-Fi and Internet
Wi-Fi network not found or distorted
• Check if the firewalls in your network allow access to the TV's wireless connection.
• If the wireless network does not work properly in your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality.
44
• Use a high-speed (broadband) Internet connection for your router.
DHCP
• If the connection fails, you can check the DHCP (Dynamic Host Configuration Protocol) setting of the router. DHCP should be switched on.
17.10
Wrong Menu Language
Change the language back to your language. 1 - Press (Home), select Settings > Region and language > Languages > Menu language and press OK.
2 - Select the language you want and press OK. 3 - Press BACK to close the menu.
45
18
Safety and Care
18.1
Safety
Important
Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply.
Risk of Electric Shock or Fire
• Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are split on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips TV Consumer Care to have the TV checked before use.
• Never expose the TV, remote control or batteries to excessive heat. Never place them near burning candles, naked flames or other heat sources, including direct sunlight.
• Never insert objects into the ventilation slots or other openings on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Ensure that no strain is exerted on the power cord when you swivel the TV screen.
• To disconnect the TV from the main power, the power plug of the TV must be disconnected. When disconnecting the power, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
Risk of Injury or Damage to the TV
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.
Stability Hazards
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions, such as:
• ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television.
• ALWAYS use furniture that can safely support the television.
• ALWAYS educate children about the dangers of climbing on furniture to reach the television or its controls.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.
• NEVER place a television in an unstable location.
• NEVER place the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and television to a suitable support.
• NEVER place the television on cloth or other materials that may be located between the television and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
If the existing television is going to be retained and relocated, the same considerations as above should be applied.
Risk of Swallowing Batteries
The remote control may contain coin-type batteries which can easily be swallowed by small children. Keep these batteries out of reach of children at all times.
• Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand.
• When wall mounted, ensure that the wall mount can safely bear the weight of the TV set. TP Vision bears no responsibility for improper wall mounting that results in accident, injury or damage.
• Parts of this product are made of glass. Handle with care to avoid injury or damage.
Risk of damage to the TV!
Before you connect the TV to the power outlet,
Risk of Overheating
Never install the TV in a confined space. Always leave a space of at least 10 cm or 4 inches around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV.
46
Lightning Storms
Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
Risk of Hearing Damage
Avoid using earphones or headphones at high volumes or for prolonged periods of time.
Low Temperatures
If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
Humidity
In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction.
18.2
Screen Care
Clean
• Never touch, push, rub or strike the screen with any object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and wipe gently. Never use substances such as alcohol, chemicals, or household cleaners on the TV.
• To avoid deformations and color fading, wipe off water drops as quickly as possible.
• Avoid stationary images as much as possible. Stationary images are images that remain on screen for extended periods of time. Stationary images include on screen menus, black bars, time displays, etc. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.
47
19
Terms of Use
2018 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter referred to as Envision, which is the manufacturer of the product. Envision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V or their respective owners. Envision reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website www.philips.com/TVsupport are believed to be adequate for the intended use of the system.
Envision is committed to developing, producing and marketing products that cause no adverse health effects. Envision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Envision plays an active role in the development of safety standards, enabling Envision to anticipate further developments in standardization for early integration in its products.
The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Envision warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Envision cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
Terms of warranty - Risk of injury, damage to TV or void of warranty! Never attempt to repair the TV yourself. Use the TV and accessories only as intended by the manufacturer. The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips TV Customer Care for service or repairs. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed. Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorized in this manual, shall void the warranty.
Pixel characteristics This TV product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.
48
20
20.4
Copyrights
20.1
MHL
MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC.
20.2
HDMI
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
DTS HD
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
20.5
ANATEL
Este produto está homologado pela ANATEL de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requistos técnicos aplicados. Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
20.3
Dolby Audio
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
20.6
Wi-Fi Alliance
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
49
20.7
Other Trademarks
All other registered and unregistered trademarks are the property of their respective owners.
50
21
Open Source
21.1
Open Source Software
This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences.
This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain the source code, please write in English to . . .
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use. In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/
c-ares (1.10.0) c-ares is a C library that performs DNS requests and name resolves asynchronously. Source: http://c-ares.haxx.se/
coreutils (6.9) The GNU Core Utilities are the basic file, shell and text manipulation utilities of the GNU operating system. These are the core utilities which are expected to exist on every operating system. Source: http://www.gnu.org/software/coreutils/
open.source@tpv-tech.com
21.2
Open Source License
About Open Source License
README for the source code of the parts of TP Vision Netherlands B.V. TV software that fall under open source licenses.
This is a document describing the distribution of the source code used on the TP Vision Netherlands B.V. TV, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain copies of this software can be found in the Directions For Use.
TP Vision Netherlands B.V. MAKES NO WARRANTIES WHATSOEVER, EITHER EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS SOFTWARE. TP Vision Netherlands B.V. offers no support for this software. The preceding does not affect your warranties and statutory rights regarding any TP Vision Netherlands B.V. product(s) you purchased. It only applies to this source code made available to you.
Open Source
bash (3.2.48) Bash is the shell, or command language interpreter, that will appear in the GNU operating system. Bash is an sh-compatible shell that incorporates useful features from the Korn shell (ksh) and C shell (csh). It is intended to conform to the IEEE POSIX
e2fsprogs (2.12.2) e2fsprogs provides the filesystem utilities for use with the ext2 filesystem, it also supports the ext3 and ext4 filesystems. This piece of software is made available under the terms and conditions of the e2fsprogs license, which can be found below. Source: http://e2fsprogs.sourceforge.net/
Expat (2.01) xml paser; Expat is an XML parser library written in C. It is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). An introductory article on using. This piece of software is made available under the terms and conditions of the Expat license, which can be found below. Source: http://expat.sourceforge.net/
DFB (4.2.31) It is a software library for GNU/Linux/UNIX based operating system with a small memory footprint that provides graphics acceleration, input device handling and abstraction layer, and integrated windowing system with support for translucent windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications Source: http://sourceforge.net/projects/jointspace/fil es/remote_applications_SDK/remote_spplications_S DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
SAWMAN SaWMan, the Shared application and Window Manager, is a new window manager module for use with DirectFB. Source: http://www.directfb.org/index.php?path=Mai n%2FDownloads&page=1
findutils (4.2.31)
51
The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/
Freetype (2.4.3) FreeType is a software font engine that is designed to be small, efficient, highly customizable, and portable while capable of producing high-quality output (glyph images). Source: http://freetype.sourceforge.net
fuse (2.8.4) Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel. This piece of software is made available under the terms and conditions of the fuse license, which can be found below. Source: http://fuse.sourceforge.net/
gawk (3.1.5) If you are like many computer users, you would frequently like to make changes in various text files wherever certain patterns appear, or extract data from parts of certain lines while discarding the rest. To write a program to do this in a language such as C or Pascal is a time-consuming inconvenience that may take many lines of code. The job is easy with awk, especially the GNU implementation: gawk. Source: http://www.gnu.org/software/gawk/
glibc (2.12.2) Any Unix-like operating system needs a C library: the library which defines the “system calls” and other basic facilities such as open, malloc, printf, exit...The GNU C library is used as the C library in the GNU system and most systems with the Linux kernel This piece of software is made available under the terms and conditions of the glibc license, which can be found below. Source: http://www.gnu.org/software/libc/
grep (2.5.1a) The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines. Source: http://www.gnu.org/software/grep/
gzip (1.3.12) GNU Gzip is a popular data compression program originally written by Jean-loup Gailly for the GNU project. Mark Adler wrote the decompression part. Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2) Inetutils is a collection of common network programs.
Source: http://www.gnu.org/software/inetutils/
iptables (1.4.15) For Cross connection. Source: http://www.netfilter.org/projects/iptables/
iputils (s20101006) The iputils package is set of small useful utilities for Linux networking. It was originally maintained by Alexey Kuznetsov. Source: http://www.skbuff.net/iputils/
Libcurl (7.30.0) HTTP client;libcurl is a free and easy-to-use client­side URL transfer library, supporting FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos4), file transfer resume, http proxy tunneling and more! This piece of software is made available under the terms and conditions of the Libcurl license, which can be found below. Source: http://curl.haxx.se/
libiconv (1.11.1) This library provides an iconv() implementation, for use on systems which don't have one, or whose implementation cannot convert from/to Unicode. . This piece of software is made available under the terms and conditions of the libiconv license, which can be found below. Source: http://ftp.gnu.org/pub/gnu/libiconv
libmtp (0.3.6) libmtp is an Initiator implementation of the Media Transfer Protocol (MTP) in the form of a library suitable primarily for POSIX compliant operating systems. We implement MTP Basic, the stuff proposed for standardization. Source: http://libmtp.sourceforge.net/
libjpg (6b) This library is used to perform JPEG decoding tasks. This piece of software is made available under the terms and conditions of the libjpg license, which can be found below. Source: http://www.ijg.org/
libusb This is the home of libusb, a library that gives user level applications uniform access to USB devices across many different operating systems. libusb is an open source project licensed under the GNU Lesser General Public License version 2.1. Many participants in the libusb community have helped and continue to help with ideas, implementation, support and improvements for
52
libusb. This piece of software is made available under the terms and conditions of the libusb license, which can be found below. Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/
libusb-compat Library to enable user space application programs to communicate with USB devices. This piece of software is made available under the terms and conditions of the libusb-compat license, which can be found below. Source: http://libusb.wiki.sourceforge.net/LibusbCompat0.1
libpng (1.2.43) libpng -THE reference library for reading, displaying, writing and examining png Image Network Graphics. This piece of software is made available under the terms and conditions of the libpng license, which can be found below. Source: http://sourceforge.net/projects/libpng/files/
Libxml2 (2.7.8) The "libxml2" library is used in AstroTV as a support for the execution of NCL application. This library was developed for the GNOME software suite and is available under a "MIT" license. Source: http://www.xmlsoft.org
Linux Kernel (3.1) The Linux kernel is an operating system kernel used by the Linux family of Unix-like operating systems. This piece of software is made available under the terms and conditions of the Linux Kernel license, which can be found below. Source: http://www.kernel.org
Linux Fusion (8.7.0) Source: GNU
liveMedia (2011.06.12) c++ runtime library for RTSP requirement Source: www.live555.com
lvm2 (2.02.89) Userspace toolset that provide logical volume management facilities on linux. This piece of software is made available under the terms and conditions of the lvm2 license, which can be found below. Source: ftp://sources.redhat.com/pub/lvm2/releases/
module-init-tools (3.12) Provides developer documentation for the utilities used by Linux systems to load and manage kernel modules (commonly referred to as "drivers"). Source: https://modules.wiki.kernel.org/index.php/M
ain_Page
mtd-utils The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc., but will only need to provide simple routines for read, write and erase. Presentation of the device's contents to the user in an appropriate form will be handled by the upper layers of the system. This piece of software is made available under the terms and conditions of the mtd-utils license, which can be found below. Source: http://www.linux­mtd.infradead.org/index.html
ncurses (5.7) The ncurses (new curses) library is a free software emulation of curses in System V Release 4.0 (SVr4), and more. It uses terminfo format, supports pads and color and multiple highlights and forms characters and function-key mapping, and has all the other SVr4-curses enhancements over BSD curses. SVr4 curses is better known today as X/Open Curses. Source: http://www.gnu.org/software/ncurses/
net-tools (1.6) The Net-tools?package is a collection of programs for controlling the network subsystem of the Linux kernel. Source: http://www.linuxfromscratch.org/blfs/view/6. 3/basicnet/net-tools.html
NTFS-3G Read/Write Driver (2010.5.22) NTFS-3G is an open source cross-platform implementation of the Microsoft Windows NTFS file system with read-write support. NTFS-3G often uses the FUSE file system interface, so it can run unmodified on many different operating systems. It is runnable on Linux, FreeBSD, NetBSD, OpenSolaris, BeOS, QNX, WinCE, Nucleus, VxWorks, Haiku,MorphOS, and Mac OS X It is licensed under either the GNU General Public License or a proprietary license. It is a partial fork of ntfsprogs and is under active maintenance and development. This piece of software is made available under the terms and conditions of the NTFS-3G Read/Write Driver license, which can be found below. Source: http://www.tuxera.com
openssl (1.0.1j) OpenSSL is an open source implementation of the SSL and TLS protocols. The core library (written in the C programming language) implements the basic cryptographic functions and provides various utility functions. Wrappers allowing the use of the OpenSSL library in a variety of computer languages are available. Source: http://www.openssl.org/
53
procps (ps, top) (3.2.8) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html
samba (3.0.37) Samba is the standard Windows interoperability suite of programs for Linux and Unix. Source: http://www.samba.org/
to run . This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below. Source: http://www.denx.de
udhcpc (0.9.8cvs20050303-3) Source: http://udhcp.sourcearchive.com/downloads/
0.9.8cvs20050303-3/
uDirectFB (1.5.3) Source: http://www.directfb.org
SaWMan (1.5.3) SaWMan, the Shared application and Window Manager, is a new window manager module for use with DirectFB. Source: http://www.directfb.org
sed (4.1.5) sed (stream editor) isn't an interactive text editor. Instead, it is used to filter text, i.e., it takes text input, performs some operation (or set of operations) on it, and outputs the modified text. sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file. Source: http://www.gnu.org/software/sed/
SQLite3 (2.12.2) SQLite is a in-process library that implements a self­contained, serverless, zero-configuration, transactional SQL database engine. This piece of software is made available under the terms and conditions of the SQLite3 license, which can be found below. Source: http://www.sqlite.org/
SquashFS SquashFS is a compressed read-only file system for Linux. SquashFS compresses files, inodes and directories, and supports block sizes up to 1 MB for greater compression. SquashFS is also the name of free/open software, licensed under the GPL, for accessing SquashFS filesystems. This piece of software is made available under the terms and conditions of the SquashFS license, which can be found below. Source: http://squashfs.sourceforge.net/
tar (1.17) GNU Tar provides the ability to create tar archives, as well as various other kinds of manipulation. For example, you can use Tar on previously created archives to extract files, to store additional files, or to update or list files which were already stored. Source: http://www.gnu.org/software/tar/
uriparser (0.7.7) Uriparser is a strictly RFC 3986 compliant URI parsing and handling library written in C. uriparser is cross­platform, fast, supports Unicode and is licensed under the New BSD license. Source: http://uriparser.sourceforge.net/
util-linux-ng (2.18) Various system utilities. Source: http://userweb.kernel.org/~kzak/util-linux­ng/
wget (1.10.2) GNU Wget is a free software package for retrieving files using HTTP, HTTPS and FTP, the most widely­used Internet protocols. It is a non-interactive commandline tool, so it may easily be called from scripts,?cron?jobs, terminals without X-Windows support, etc. Source: http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wpa_supplicant v0.8(wext)/v2.3(cfg80211) wpa_supplicant is a WPA Supplicant for Linux, BSD, Mac OS X, and Windows with support for WPA and WPA2 (IEEE 802.11i / RSN). It is suitable for both desktop/laptop computers and embedded systems. Supplicant is the IEEE 802.1X/WPA component that is used in the client stations. It implements key negotiation with a WPA Authenticator and it controls the roaming and IEEE 802.11 authentication/association of the wlan driver. Source: https://w1.fi/wpa_supplicant/
xerces-c++ (3.1.1) Source: http://xerces.apache.org/
zlib (6b) The 'zlib' compression library provides in-memory compression and decompression functions, including integrity checks of the uncompressed data. This piece of software is made available under the terms and conditions of the zlib license, which can be found below. Source: http://www.zlib.net/
u-Boot (2011.12) The uboot will load the linux kerenl to dram,and jump
54
22
Disclaimer regarding services and/or software offered by third parties
Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. Envision does not bear any responsibility in these sorts of situations.
55

Index

A
Age rating 33 Antenna Connection 9 App Gallery 37 Audio Out Menu 30 Auto Clock Mode 32
B
Batteries 5
C
Channel List 17 Channel List Copy 16 Channel Logos 16 Channel Options 16 Channel, Channel Filter 17 Channels 15 Child Lock, Change Code 33 Child Lock, Set Code 33 Clear Internet Memory 35 Clock 32 Closed caption 18 Color 27 Color Enhancement 27 Color Settings 27 Color Temperature 27 Component - Y Pb Pr 9 Composite - CVBS 9 Connect Device 9 Consumer Care 3 Contact Info 3 Content rating 33 Contrast 27
D
Date 32 Digital Audio Out - Optical 10 Digital Media Renderer - DMR 35 Digital Out Delay 30 Digital Out Format 30 Digital Out Leveling 30 Digital Out Menu 30 Digital Out Offset 30 Display Resolution 40 Dynamic Contrast 28
E
Energy Saving 31
F
Favorite Channel, Channel Range 17 Favorite Channel, Create 17 Favorite Channel, Edit 17 Favorite Channels 18
G
Gamma 28 Ginga 19
H
HDMI 9 HDMI - CEC 31 HDMI ARC 10
HDMI Sound System 30 HDMI Ultra HD 31 HDR Plus 27 Headphone Connection 10 Help Menu 3 Home Menu 26 Home or Shop 32
I
Identify TV 3
K
Keys on TV 6
L
Location 32 Lock Channel 18
M
Menu language 19 Menu Languages 32 MHL Connection 11 Miracast 10 Miracast Connection 11 Mouse Settings 31
N
Natural Motion 28 Netflix settings 35 Network - Wired 34 Network - Wireless 34 Network settings 34 Network Settings Menu 35
O
On-line User Manual 3
P
Pause TV 22 Philips Support 3 Philips TV Remote App 12 Photos, Videos and Music 24 Picture Clean, Noise Reduction 28 Picture Contrast Mode 27 Picture Format 29 Picture Motion Style 28 Picture, Color 27 Picture, Contrast 27 Picture, Sharpness 27 Picture, Ultra Resolution 28 Power Cable 7 Problems 42
Q
Quick Picture Settings 29 Quick Settings Menu 26
R
Recordings 22 Register TV 3 Remote Control 5 Remote Control - IR Sensor 6 Remote Control and Batteries 5 Rename Device 14
56
Repair 3 Reset Settings 32
S
Safety and Care 46 Screen Off 31 Sharpness 27 Shop Setup 32 Sleep Timer 32 Smart TV 37 Software Version 4 Sound Style 29 Sound, Auto Volume Leveling 30 Sound, Delta Volume 30 Sound, Expert mode 29 Source List 14 Standby Mode 8 Static IP 35 Switch Off Timer 31 Switch On with Wi-Fi 35 Switching On 8
T
Time 32 Time Zone 32 Tint 27 Troubleshooting 42 TV guide 20 TV Network Name 35 TV Placement 30 TV Reception 40 TV Speaker 30
U
Universal Access 33 Universal Access, Audio Description 33 Universal Access, Audio Effects 33 Universal Access, Mixed Volume 33 Universal Access, Speech 33 Unlock Channel 18 Update Software 4 Update Software - Internet 4 Update Software - Local Updates 4 Update Software - USB 4 USB Flash Drive 12 USB Hard Drive 31 USB Hard Drive - Format 12 USB Keyboard Settings 31 User Manual 3
V
Video Contrast 28 View Network Settings 35 Viewing Distance 7
W
Wall Mounting 7 Wi-Fi 35
57
Powered by TCPDF (www.tcpdf.org)
58
Loading...