Philips 55PFL4901/F7, 43PFL4901/F7 user manual

Telev isions

4000 series

55PFL4901 50PFL4901 43PFL4901

www.philips.com/welcome

EN For further assistance, call the customer support service in your

User manual

ES Manual del usuario

Manuel d’utilisation

EN If you read this User Manual for 55PFL4901, 50PFL4901,

43PFL4901 and your television’s serial number starts with:

• DS6 - Please start to read from next page.

• DS7 - Please start to read from p.58. ES Si lee este Manual de Usuario para 55PFL4901, 50PFL4901,

43PFL4901 y el numero de serie de su television comienza con:

• DS6 - Por favor comience a leer desde la siguiente página.

• DS7 - Por favor comience a leer desde la p.58. FR Si vous lisez ce Manuel d’Utilisation pour le 55PFL4901,

50PFL4901, 43PFL4901 et que le numero de serie de votre televiseur commence par:

• DS6 - Veuillez commencer a lire a partir de la page suivante.

• DS7 - Veuillez commencer a lire a partir de la p.58.

country.

• To obtain assistance, contact Philips customer care center; In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands

1 866 813 3283

México D.F. and área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89

ES Para obtener más información, llame al servicio de soporte al cliente

de su país.

• Para obtener asistencia, comuníquese con centro de atención al cliente de Philips; En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los Estados Unidos; 1 866 813 3283 México D.F. y área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89

FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre

de service à la clientèle de votre pays.

• Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au; Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines; 1 866 813 3283 México D.F. et área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

Contents

2 .English

1 Notice ....................................................................................... 5

2 Important ............................................................................... 7

Positioning the TV Regulatory notices Environmental care Preparing to move / ship the unit

3 Getting started ................................................................... 8

Features Supplied accessories Symbols used in this User manual Stand assembly Attaching the base Installing the remote control batteries Remote control Control panel Terminals Connecting Antenna or Cable / Satellite / IPTV set-top box Plugging in the AC power cord Selecting your connection quality Connecting your devices Initial setup

11 11 12 12 13 13 17

4 Use your TV ....................................................................... 19

Switching on your TV and putting it in standby mode Adjusting volume Switching channels Watching channels from an external device Access the Home menu Create a list of favorite channels Changing Picture format TV screen information Using options menu USB

19 19 19 20 20

21 21 22 23 24

5 Getting more from your TV ...................................... 27

Picture and sound setup TV settings

Picture Sound Features Installation

28 28 28

31 32

Search for channels

Install channels

Channel settings

Channel installation Child lock

7 7 7 7

8 8 8 9 9 9

Change PIN Digital audio language Mono/Stereo

Connect to network

Wireless setting Wired setting

Network settings

Manual network settings Connection test Setting status Home network Wake-on-LAN(DIAL) Net TV Reset network settings

Update software

Preparing for the software upgrade Downloading the software USB upgrade Network updates

Software settings

Software Wireless Screencasting View photos, play music and watch videos using home

network Net TV Pandora operations

35 35 35 35 36 37 37 37 38 38 38 39 39 41 41 42 42 42 42 43 43 43 43 44 44 44 45

45 48

6 Useful tips .......................................................................... 50

FAQ Troubleshooting tips

50 51

7 Information ......................................................................... 53

Glossary Maintenance

53 53

8 Specifications ................................................................... 54

9 Warranty ............................................................................. 55

License .......................................................................................... end of book

Displays and illustrations may differ depending on the product you purchase.

•

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

to get the most benets from your purchase.

Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Register Online at www.philips.com/welcome to ensure:

*Product safety notication *Additional benets

By registering your product, you'll receive notication - directly from the manufacturer - in the rare case of a product recall or safety defect.

3 .English

Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving oers.

Know these safety symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la che dans la borne

correspondante de la prise et pousser jusqu’au fond.

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

For fastest support visit us online for chat and self service solutions at www.philips.com/support

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

• As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certication by an independent laboratory (such as UL, CSA, ETL).

• ALWAYS follow all instructions supplied by the television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the purchase of a at-panel television. Special care should be made in the placement of older CRT televisions.

• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.

• NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.

• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments / accessories specied by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

10.

1 1.

12.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13.

14.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, species that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of antenna grounding as per NEC National Electric Code

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ELECTRIC SERVICE EQUIPMENT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

GROUND CLAMPS

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

Important safety instructions

4 .English

Wall mount bracket kit

55PFL4901

0PF

L4901

5 43PFL4901 SAN25BB M4 x 0.472” (12mm)

You

V meets the VESA standard for wall mounting. Consult with your

r T

•

local dealer for a wall mount bracket which is compatible with your TV model. The recommended wall mount bracket kit (sold separately) allows the

•

mounting of the TV on the wall. For detailed information on installing the wall mount, refer to the wall

•

mount Instruction book. Funai Corporation is not responsible for any damage to the product

•

or injury to yourself or others if you elect to install the TV wall mount bracket or mount the TV onto the bracket on your own. The wall mount bracket must be installed by experts.

•

Brand Model # Screw dimension

SANUS

PLA50B M6 x 0.472” (12mm)

Funai Corporation is not liable for these types of accidents or injuries note

d below.

Install the wall mount bracket on a sturdy vertical wall.

•

If installed onto a ceiling or slanted wall, the TV and wall mount bracket

•

may fall which could result in a severe injury. Do not use screws that are longer or shorter than their specified length.

•

If screws too long are used this may cause mechanical or electrical damage inside the TV set. If screws too short are used this may cause the TV set to fall. Do not fasten the screws by excessive force. This may damage the

•

product or cause the product to fall, leading to an injury. For safety reasons use 2 people to mount the TV onto a wall mounting

•

bracket. Do not mount the TV onto the wall mounting bracket while your TV is

•

plugged in or turned on. It may result in an electrical shock injury.

When installing the unit on the wall, allow this much space.

Top

Left and right side

Bottom

: 1 1.8 inches (30cm) : 5.9 inches (15cm) : 3.9 inches (10cm)

Trademarks are the property of Koninklijke Philips N.V. or their respective owners.

Funai Corporation reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The material in this Owner’s Manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specied herein, conrmation of their validity and suitability must be obtained. Funai Corporation warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Funai Corporation cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Funai Corporation will be adapted and published on the Funai Corporation support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has eective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Service Centers and ocial repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this manual, any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

the receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio or

television technician for help.

Modications

This apparatus may generate or use radio frequency energy. Changes or Modications to this apparatus may cause harmful interference.

Any Modications to the apparatus must be Approved by Funai Corporation.

The user could lose the authority to operate this apparatus if an unauthorized Change or Modication is made.

Cables

Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC Rules and Regulations.

Canadian notice

CAN ICES-3 (B)/NMB-3 (B) Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.

The following FCC/IC RSS applies to the Wireless LAN adapter included in this product.

FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Country Code Statement

For product available in the USA market, only channel 1∼1 1 can be operated. Selection of other channels is not possible.

To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that do not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

5150-5250 MHz band is restricted to indoor operations only.

High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Compliance with IC requirement RSS-210 A9.4.4

Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and nally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns o at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

1 Notice

5 .English

Declaration of conformity

de name

Tra Responsible party Model Address

Telephone number

This is not the mailing address for Open Source Software or Customer

service.

: PHILIPS : Funai Corporation, Inc. : 55PFL4901, 50PFL4901, 43PFL4901 : 12489 Lakeland Road, Santa Fe Springs, CA

90670, USA*

: 1 866 813 3283

All other registered and unregistered trademarks are the property of their respective owners.

The terms HDMI and HDMI HighDenition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Sonic Emotion and the Sonic Emotion logo symbol are registered trademarks of sonic emotion ag.

ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy ecient products and practices.

Consumer Notice:

This TV has been set to maximize energy eciency while delivering the best possible picture using the factory installed home mode settings.

Changing or enabling other features in this TV (e.g. brightened backlighting) will possibly increase energy consumption beyond the original ENERGY STAR

qualied limits.

Netix is available in certain countries. Streaming membership required. More information at www.netix.com.

VUDUTM is a trademark of VUDU, Inc.

YouTube and the YouTube logo are trademarks of Google Inc.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.

CinemaNow and the CinemaNow logo are trademarks of BestBuy Stores L.P. and BestBuy Canada LTD.

Hotlist, Samba, Samba TV and associated logos are trademarks of Free Stream Media Corp.

The American Academy of Pediatrics discourages television viewing for children younger than two years of age.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

6 .English

Some features may require an always-on broadband internet

ction, firmware update and/or a minimum bandwidth. Internet

conne services vary by location.

Funai Corporation Inc. does not warrant access to the portal or to any of the services, content, software and advertising. Funai Corporation Inc. may, in its sole discretion, add or remove access to any specific services, content, software and advertising at any time. Although Funai Corporation Inc. will strive to provide a good selection of services, content or software, Funai Corporation Inc. does not warrant continued access to any specific services, and content or software.

Funai Corporation Inc. does not warrant Wireless Screencasting compatibility with all source devices such as smartphones, tablets, laptops, etc. due to large variability in hardware, firmware, drivers, software and implementation of wireless casting applications on these source devices. Although Funai Corporation Inc. will strive to enhance compatibility and performance across a range of source devices, Funai Corporation Inc. does not warrant compatibility with specific source devices.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

7 .English

2 Important

Positioning the TV

• Large screen TVs are heavy. 2 people are required to

carry and handle a large screen TV.

• Make sure to hold the upper and bottom frames of the Unit rmly as illustrated.

• Install the Unit in a horizontal and stable position.

• Do not install the Unit in direct sunlight or in a place subject to dust or strong vibration.

• Depending on the environment, the temperature of this Unit may increase slightly. This is not a malfunction.

• Avoid a place with drastic temperature changes.

• Do not place anything directly on top or bottom of the

Unit.

• Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the Unit is placed too close to them. In this case, please ensure enough space between the external devices and the Unit.

• Do not insert the AC power cord into the power socket outlet before all the connections are made.

• Ensure that you always have easy access to the AC Power Cord and Outlet to disconnect the TV from the AC Outlet.

• Before you move the TV, disconnect attached Cables to prevent damage to Connectors, especially the TV Tuner.

• Be sure to Unplug the AC Power Plug from the AC outlet before moving or carrying the Unit.

• When moving the TV and then Setting it down, please be careful not to pinch the AC Power Cord under the Unit.

Environmental care

The packaging of this product is intended to be recycled. Contact your local authorities for information about how

to recycle the packaging. For product recycling information, please visit -

End of life directives

Philips pays a lot of attention to produce environmental-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury and cadmium, however in certain localities, disposing batteries with household waste is not permitted. Please ensure you dispose of batteries according to local regulations.

Preparing to move / ship the unit

Regulatory notices

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 4 inches (10cm) or more around this apparatus. Press to turn the unit On and go into Standby mode. To completely turn O the unit, you must unplug the AC power Plug from the AC Power Outlet. Disconnect the AC Power Plug to shut the unit O when trouble is found or not in use. The AC Plug shall remain readily available.

Please pack the unit properly by following the diagram on the carton (as noted below).

12 3 4

• To avoid damage to the screen, do not pack the stand

AC power plug

Never use a gas duster on this TV. The gas trapped inside of this unit may cause ignition and explosion.

CAUTION: Danger of explosion if battery is incorrectly replaced.

WARNING: Batteries (battery pack or battery installed) should

WARNING: To prevent injury, this apparatus must be securely

Replace only with the same or equivalent type.

not be exposed to excessive heat such as sunshine, re or the like.

attached to the furniture / wall in accordance with the instructions. Tipping, shaking or rocking the unit may cause injury / death.

on the same side as the TV screen, refer to the step 4 above.

When using a universal remote control to operate this unit.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

8 .English

2 Getting started

Features

DTV / Analog TV / CATV

•

You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable and satellite subscribers can access their TV channels.

Information display

•

You can display on the TV screen the title, contents (DTV only) and other information on the current program.

Autoprogram

•

This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.

Net TV

•

This unit lets you enjoy internet services. Use the remote control to browse the Net TV pages. You can play movies and much more, all from your TV screen.

Child lock

•

This feature allows you to block children’s access to inappropriate programs.

Closed caption decoder

•

Built-in closed caption decoder displays text for closed caption supported programs.

MTS / SAP tuner

•

Audio can be selected from the remote control.

Auto standby

•

If there is no input signal and no operation for 15 minutes, the unit will go into standby mode automatically.

Sleep timer

•

You can set the unit to go into standby mode after a specific amount of time.

Choices for on-screen language

•

Select your on-screen language: English, Spanish or French.

Stereo sound function

•

PLL frequency synthesized tuning

•

Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point “•” keys on the remote control.

Various adjustments for picture and sound

•

Customizes picture quality suitable for your room and sets your sound preference.

EasyLink via HDMI link

•

EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV.

HDMI input

•

HDMI-DVI input

•

If your video device has a DVI output jack, use an HDMI-DVI conversion cable to connect the unit.

Component video input

•

PC input

•

AV input

•

Audio and video input from an external device.

USB terminal

•

The picture, music and video files stored on a USB memory stick can be played back on this unit.

Digital audio output

•

Headphone audio output

•

Headphone 3.5mm stereo jack for personal listening.

Supplied accessories

Quick Start guideUser Manual

TV base and Screws

55” / 50”

43”

Screws packed with this Unit.

55PFL4901

* Caution Sheet is not included in 43PFL4901.

Note(s)

If you lose the screws, please purchase the above-mentioned Phillips head screws at your local

•

store. If you need to replace these accessories, please refer to the part name or No. with the illustrations

•

and call our toll free customer support line found on the cover of this User manual.

Make sure the component code on your universal remote control is set to our brand. Refer to

•

the instruction book accompanying your remote control for more details. We do not guarantee 100% interoperability with all universal remote controls.

•

8 2

850PFL4901

343PFL4901

M4 x 0.472”(12mm) M5 x 0.472”(12mm)

M4 x 0.472”(12mm)

M4 x 0.787”(20mm)

Caution Sheet

Remote Control

and Batteries (AAA, 1.5V x 2)

AAA

AA A

SizeQuantityModel

Symbols used in this User manual

The following is the description for the symbols used in this User manual. Description refers to:

Digital TV operation

Cable / NTSC (Analog) TV operation

If neither symbol appears, the operation is applicable to both.

•

Continued on next page.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

9 .English

Stand assembly

(55PFL4901, 50PFL4901)

M4 x 0.472” (12mm)

M5 x 0.472” (12mm)

* For 55PFL4901 only.

× 4 × 2*

Attaching the base

You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. For large screen TVs, at least 2 people are required for these steps.

(55PFL4901, 50PFL4901)

(43PFL4901)

× 3

M4 x 0.787” (20mm)

Note(s)

Make sure to use a table which can support the weight of this unit and is larger than this unit.

•

Make sure the table is in a stable location.

•

A Phillips-head screwdriver is required to fasten the stands to the TV set.

•

When attaching the base, ensure that all screws are tightly fastened. If the base is not properly

•

attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit. To remove the base from this unit, unscrew the Phillips-head screws by reversing the procedure.

•

Be careful not to drop the base when you remove it.

Installing the remote control batteries

Slide the battery cover off the back of the remote control.

× 4

M4 x 0.472” (12mm)

Insert the two supplied batteries (AAA, 1.5V). Be sure the + and – ends

of the batteries line up with the markings inside the case.

Slide the cover back into position.

Note(s)

Remove the batteries if not using the remote control for an extended period of time.

•

Continued on next page.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

Remote control

d e f

h i



 (POWER)

Turns the TV on from standby or off to standby.

VUDU



Access directly to VUDU.

EasyLink buttons



 /   .

Note(s)

Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)

•

compliant.



SOURCE

Selects connected devices.



(Home)

Displays the main menu.

Apps (APP1 / APP2 / APP3 / APP4) buttons

Works as direct access to user specified net apps.

INFO

Displays information about the current program.

Press to decide the command of setting when the Home menu is displayed.

 (NAVIGATION buttons)

Moves the cursor, selects the on-screen menu items.

OPTIONS

Displays a list of menu items applicable to the highlighted object or screen.

CH + / –

Selects a channel.

0 - 9 (NUMBER buttons)

Used to enter a channel / program number.

• (DOT) : Use with 0-9 to select digital channels.

: Searches backward or forward through the disc.

: Starts, pauses or resumes playback.

: Stops the disc playback.

For example, to enter 2.1, press

10 .English

PREV.CH : Returns to the previously viewed channel.

 (MUTE)

Turns the sound on and off.

VOL + / –

(

Adjusts the volume.

)

BACK

Returns to the previous menu operation.

FORMAT

Adjusts the picture size on the TV screen.

NET TV

Access to Net TV menu directly.

YouTube

Access directly to YouTube.

NETFLIX

Access directly to Netflix.

Continued on next page.

m n

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

11 .English

Control panel

cba

Remote control sensor



Receives IR signal from remote control.

Ambient light sensor



Alters the brightness of the TV screen automatically by detecting your room lighting level. Do not block this light sensor window which allows proper operation.

Power on / Standby indicator



(On : lights in white, Standby : no light)



(POWER)

Turns the TV on or switches the TV into standby mode.

SOURCE



Selects connected devices.

Opens the main on-screen menu.

CH (+) / (–)

Selects a channel. In the menu screen, moves the cursor up () (–) / down () (+).

VOL (–) / (+)

Adjusts the volume. In the menu screen, moves the cursor left () (–) / right () (+).

VOL (–) VOL (+)

: Volume down

: Volume up

Terminals

Digital audio output jack

Digital audio (S/PDIF) output to home theaters and other digital audio systems.

Ethernet port

For internet connection using an Ethernet cable with an RJ-45 connector.

PC input jack

VGA cable connection for PC.

Component (Y/Pb/Pr) / Composite video (VIDEO) input jack(s) for

VIDEO

Composite video input (VIDEO) jack is a shared jack with component video input (Y) jack.

Analog audio (L/R) input jacks

Connect analog audio signals from;

–HDMI-DVI / Analog audio (L/R) jacks signal –Component video / Analog audio (L/R) jacks signal –Composite video / Analog audio (L/R) jacks signal –PC connection / Analog audio (L/R) jacks signal with stereo mini 3.

5mm plug audio cable on PC

HDMI input jack(s)

(

Digital audio and video input from high definition digital devices such as DVD / Blu-ray disc players, cable / satellite set-top boxes, PC’s, etc.

* For HDMI 1 only

In addition to normal HDMI and HDMI-DVI functionality, it outputs TV audio to an HDMI-ARC-compliant device, such as a home theater system.

USB terminal

)

Data input from USB memory stick only. Do not connect any device to this terminal such as digital camera, keyboard, mouse, etc.

75 ohm cable / Antenna connection

Signal input from an antenna or cable / satellite set-top boxes.

Headphone audio output jack

Headphone 3.5mm stereo jack for personal listening.

Continued on next page.

RF cable

HDMI cable

Component (Y/Pb/Pr)

Video cables

Audio (L/R) cables

Video + Audio(L/R) cables

RF cable

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

12 .English

Connecting Antenna or Cable / Satellite / IPTV set-top box

Be sure your antenna or another device is connected properly before plugging in the AC power cord.

If connecting to an antenna through an RF cable

Any DTV programs that are broadcast in your area can be received for free through an antenna connection.

Cable

Antenna

If connecting Cable / Satellite / IPTV set-top box using an RF cable

If the TV is connected to a cable or set-top box via a coaxial connection, set the TV to channel 3/4 or the channel specified by the service provider.

Antenna

RF cable

OUT

RF cable

OUT

RF cable

INININ

Set-top Box

Connecting a Cable / Satellite / IPTV set-top box, Bluray disc / DVD recorder via composite connectors and analog audio

Do not place your recorder too close to the screen because some recorders can be susceptible to harmful interference from the TV.

Satellite

Cable

OUTOUT

Set-top Box

RF cable

If you have any question about the DTV’s antenna, visit www.antennaweb.org for further

•

information. Depending on your antenna system, you may need different types of combiners (mixers) or

•

separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000MHz or 2GHz.

For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the

•

antenna input jack before moving the unit. If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor

•

or attic antennas will be more effective than a set-top box or inside antenna. To turn on your reception source easily between antenna and cable, install an antenna

•

selector. If you are not receiving a signal from your cable service, contact the cable provider.

•

Video + Audio(L/R) cables

Note(s)

OUT

Video +

Audio(L/R)

cables

OUT

Blu-ray Disc / DVD Recorder

Cable

OUT

If connecting Cable / Satellite / IPTV set-top box using an HDMI cable

If the TV is connected to a cable / satellite set-top box via an HDMI cable, make sure you select the correct source by using SOURCE.

RF cable

IN OUT

HDMI cable

Set-top Box

If connecting Cable / Satellite / IPTV set-top box using component video input

If the TV is connected to a cable / satellite set-top box via component video input, make sure you select the correct component video source

by using SOURCE.

Audio (L/R) cables

OUT

Component (Y/Pb/Pr)

Video cables

OUT

Set-top Box

Plugging in the AC power cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made.

Caution(s)

Connect the analog audio signal cables from the external device to the analog audio L/R input

•

jacks. If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.

•

Note(s)

Each time you plug in the AC power cord, no operations will be performed for several seconds.

•

This is not a malfunction.

Continued on next page.

Before you connect the AC power cord:

HDMI cable

HDMI-DVI

conversion cable

Audio (L/R) cables

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

13 .English

No supplied cables are used with these connections:

Please purchase the necessary cables at your local store.

•

Be sure other devices are connected properly before plugging in the AC power cord.

Selecting your connection quality

HDMI - Highest quality

Supports high-definition digital signals and gives highest picture and sound quality. Video and audio signals are combined in one cable. You must use HDMI for full high-definition video and to enable EasyLink(HDMI CEC).

Note(s)

Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of

•

digital rights management that protects high-definition content in Blu-ray discs or DVDs. The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output of

•

TV audio to an HDMI-ARC-compliant device.

Component (Y Pb Pr) - High quality

Connecting your devices

HDMI digital connection

HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high-definition digital video and multi-channel digital audio through a single cable.

Set-top Box

OUT

HDMI cable

Note(s)

Some HDMI cables and devices may not be compatible with the TV due to different HDMI

•

specifications. Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is

•

recommended for the better compatibility. The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals, 32kHz/ 44.1kHz

•

and 48kHz of audio signals. This unit accepts LPCM, AC-3, DD+ audio signal.

•

This unit accepts only signals in compliance with EIA861.

•

Blu-ray Disc / DVD Player

HD game console

Supports high-definition analog signals but gives lower picture quality than HDMI. Component (Y/Pb/Pr) video cables combine red / green / blue video cables with red / white audio (L/R) cables. Match the cable colors when you connect to the TV.

Composite - Basic quality

For analog connections. Composite video / Audio analog cable usually combine a yellow video cable with red / white audio (L/R) cables. With this unit, yellow cable must be connected to Y (green) jack on the component video input jacks.

HDMI-DVI connection

This unit can be connected to your device that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection and it requires audio cable for analog audio signal as well.

Cable Receiver or

Set-top Box with the

DVI Output jack

HDMI-DVI

conversion cable

Note(s)

Some HDMI cables and devices may not be compatible with the TV due to different HDMI

•

specifications. Some newer HDMI devices may output signals that this TV cannot receive (such as 4K or HDR).

•

For such devices you will need to change the output of that device to a compatible signal. Please consult with the manufacturer or the user manual of that device.

Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is

•

recommended for the better compatibility. The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.

•

HDMI-DVI connection requires separate audio connections as well and the audio signals are

•

output as analog (L/R) audio. DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

•

conversion cable

Audio (L/R) cables

OUT

Continued on next page.

HDMI cable

HDMI 1 IN only

Component (Y/Pb/Pr)

Video cables

Audio (L/R) cables

Audio (L/R) + Video

cables

Internet

Network provisioning

equipment

Ethernet cable

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

14 .English

HDMI-ARC connection

HDMI-ARC allows you to use EasyLink to output TV audio directly to a connected audio device, without the need for an additional digital audio cable.

HDMI 1 IN only

HDMI cable

Note(s)

The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital

•

audio to an HDMI home theater system. Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the

•

device using an HDMI cable attached to HDMI-ARC connectors.

OUT

Digital home theater

amplier that supports

HDMI-ARC

Component analog video connection

Component analog video connection offers better picture quality for video devices connected to the unit.

If you connect to the unit’s component video (Y/Pb/Pr) input jacks, connect analog audio cables to the analog audio (L/R) input jacks.

Audio (L/R) cables

Component (Y/Pb/Pr)

Video cables

OUT

Set-top Box

OUT

Blu-ray Disc / DVD

Recorder

Composite analog video connection

Composite analog video connection offers standard picture quality for video devices connected to the unit.

If you connect to the unit’s component / composite video (Y/VIDEO) input jack (green), connect audio cables to the audio (L/R) input jacks. When the audio is monaural, then only connect to the audio L input jack.

Audio (L/R) + Video

cables

Note(s)

With this unit, yellow cable must be connected to Y (green) jack on the component video input

•

jacks. Whenever you connect to the composite video input jack (Y/VIDEO), you must disconnect the

•

component video input jacks (Pb and Pr). If you leave those jacks connected, it may cause an unstable picture.

OUT

DVD Player

Connecting the TV to the internet using an Ethernet cable

Internet

LAN

Network provisioning

Ethernet cable

Network provisioning

equipment

Note(s)

The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this connection.

•

Note(s)

Please purchase shielded Ethernet cables at your local store and use them when you connect

•

to network equipment.

After connecting an Ethernet cable, set up necessary network settings. Connect to network 

•

p. 38

Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging

•

the unit. If your telecommunications equipment (modem, etc.) does not have broadband router

•

functions, connect a broadband router. If your telecommunications equipment (modem, etc.) has broadband router functions but there

•

is no vacant port, then add a hub. For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

•

Do not connect your PC directly to the Ethernet port of this unit.

•

Continued on next page.

Broadband router

OUT

Digital Audio Optical cable

HDMI cable

Stereo Mini 3.5 mm

Plug Audio cable

HDMI-DVI

conversion

cable

VGA cable

Stereo Mini 3.5 mm Plug

Audio cable

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

15 .English

Connecting the TV to the internet using a wireless LAN

Internet

Network provisioning

equipment

LAN

Ethernet cable

Broadband router

Note(s)

After you make the wireless connection, set up the necessary network settings. Connect to

•

network  p. 38

Use a wireless LAN Access Point (AP) (e.g. broadband wireless router) which supports

•

IEEE 802.1 1 a/b/g/n/ac. (n is recommended for stable operation of the wireless network.) This unit does not support Ad-hoc mode.

•

Other radio devices or obstacles may cause interference to the wireless network connection.

•

WLAN

Digital audio output connection

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound.

Use a digital audio optical cable to connect the unit to external digital audio devices.

OUT

Digital Audio

Digital Audio Optical cable

Optical cable

ININ

Digital Home

Theater Amplier

PC connection

HDMI connection

This unit can be connected to your PC that has an HDMI terminal. Use an HDMI cable for this digital connection.

HDMI cable

HDMI-DVI connection

This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this video digital connection and it requires stereo mini 3.5mm plug audio cable for analog audio signal as well.

HDMI-DVI

conversion

cable

Stereo Mini 3.5 mm

Plug Audio cable

VGA connection

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use a VGA cable for this video connection and it requires a stereo mini 3. 5mm plug audio cable for analog audio signal as well.

VGA cable

OUT

Stereo Mini 3.5 mm Plug

Audio cable

Continued on next page.

OUT

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

The following PC-input video signals can be displayed:

Format Resolution Refresh rate

VGA 640 x 480

SVGA 800 x 600

XGA 1,024 x 768

WXGA

1,280 x 768 1,360 x 768

FHD 1,920 x 1,080 24/30/60Hz

Other formats or non-standard signals will not be displayed correctly.

Note(s)

Please purchase a VGA cable that has a ferrite core (0.6 inches (15mm) or more in diameter).

•

Please purchase a HDMI-DVI conversion cable that has a ferrite core.

•

The following operations may reduce noise.

•

–Attach a ferrite core to the AC power cord of your PC. –Unplug the AC power cord and use the built-in battery of your portable / laptop PC.

Some HDMI cables and devices may not be compatible with the TV due to different HDMI

•

specifications. Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is

•

recommended for the better compatibility. The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals only when using the HDMI

•

connection and HDMI-DVI connection. HDMI-DVI connection requires separate audio connections as well and the audio signals are

•

output as analog (L/R) audio. DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

•

16 .English

60Hz

USB memory stick

This unit offers easy playback of picture, music and video files. Insert the USB memory stick into the USB terminal shown below.

For a complete list of file formats and specifications supported, refer to

USB Section  p. 24

Note(s)

The unit recognizes only a USB memory stick.

•

Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit.

•

(Not supported.) Always insert a USB memory stick directly to this unit.

•

A USB memory stick is not supplied with this unit.

•

We do not guarantee that all USB memory sticks can be supported by this unit.

•

Be sure to keep a backup copy of the original files on your USB device before you play them

•

back on this unit. We have no responsibilities for damage or loss of your USB stored data. To protect your USB memory stick files from being erased place the write protect sliding tab in

•

the protect position (if available). When you are ready to remove a USB memory stick, set the unit to go into standby mode to

•

avoid any damage to your data and the unit. A USB memory stick that requires its own driver or the device with a special system such as

•

fingerprint recognition are not supported. This unit is not allowed to use the USB memory stick which requires an external power supply

•

(500mA or more).

Continued on next page.

Before you begin:

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

17 .English

These operations are accessible by remote control.

Some may also be accessible by the main unit's control panel.

Initial setup

This section will guide you through the unit’s Initial setting which includes selecting a language for your on-screen menu, country, location and Autoprogram, which automatically scans and memorizes viewable channels. You can also set the network connection in this setting.

Make sure the unit is connected to an antenna or cable.

After making all the necessary connections, press  to turn on the unit.

It may take a few moments to turn on the unit for the first time.

•

Initial setup menu appears automatically after the unit is turned on.

•

Use  to select the on-screen language, country, TV placement and location in the middle of the TV screen, then press OK.

You must set Home in location setting. Otherwise, Picture and

•

Sound settings you adjusted will not be memorized after the unit goes into standby mode.

Use  to select Skip or Next on network setup screen.

Use  to select Wireless or Wired, then press OK.

Installation

This TV can be connected to your home network. Select your connection type.

Wireless

Wired

Use  to select the signal type.

If the TV is connected to a cable or satellite set-top box, select the

•

2nd one and skip to step 8.

Installation

Select "Antenna" to set up a TV signal from a cable TV wall jack or a standard TV antenna.

Select "Set-top box" to set up a TV signal from a cable TV box or satellite TV receiver.

Antenna

Set-top box

1234 756

Use  to select Antenna for TV channels or Cable for CATV channels, then press OK.

Installation

Make sure that you have attached your antenna or cable signal into the jack on the back of your TV labeled "ANTENNA IN".

Now select either Antenna or Cable, using up/down key of the remote control. Once you have made your selection, press the OK button to proceed.

Antenna

Cable Skip

1234 756

Wireless

Wired

If you have a router with easy connect function, select Wireless and

•

use  to select Easy Connect, then press OK.

Follow the on-screen instructions to complete the installation.

When you select On in the selection screen for Auto software

•

update, A message will appear later if there is the latest software on the network server.

Skip

If you have a wireless router, select Wireless to connect to the internet.

If you connect with an Ethernet cable, select Wired to connect to the internet.

–When Antenna is selected, the TV detects antenna signals. It

searches for DTV and analog TV channels available in your area.

–When Cable is selected, the TV detects signals supplied by cable.

It searches for DTV, analog TV and cable channels available in your area.

Auto programming will begin.

•

Installation

1234 756

System searching. Please wait…

Auto programming may take more than 20 minutes to complete. Digital channels will take longer than Analog to nd and program. Please wait until you see the Auto Programming complete message.

Stop

Digital channels found: Analog channels found:

Total progress:

0 0

Continued on next page.

After an initial setup is completed...

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

Use  to select your preferred picture setting, then press OK.

Please select your preferred picture mode.

The energy consumption in the “Standard” setting is Energy Star certied.

Skip

Use  to select your preferred sound setting, then press OK.

Please select your preferred sound mode.

Skip

After Picture and sound setup is completed, a message will appear

if there is the latest software on the network server.

Note(s)

If you are not receiving a signal from your cable service, contact the cable provider.

•

If you press  during Autoprogram, this setup of TV channels will be cancelled.

•

The initial Autoprogram function can be executed for either Antenna or Cable only once. When

•

you change the connection (Antenna / Cable), select Search for channels again.  p. 35

Natural

Vivid

Sports

Standard

Vivid

Sports

18 .English

If you want to scan the channels automatically again.

•

Search for channels  p. 35

If you want to change to another language.

•

Language  p. 33

If you want to change the country setting.

•

Country  p. 48

If you want to change the location setting.

•

Location  p. 33

If you want to change the network setting.

•

Connect to network  p. 38

If you want to restore the picture and sound setting.

•

Picture and sound setup  p. 28

To turn the TV on from standby or off to standby

To decrease or increase volume

To mute or unmute sound

To select channels by using CH  /  or CH + / –

To select channels by using the NUMBER buttons

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

19 .English

3 Use your TV

Switching on your TV and putting it in standby mode

Remote Control

Press  on the TV or the remote control.

•

Note(s)

Energy consumption contributes to air and water pollution. When the AC power cord is plugged

•

in, your TV consumes energy with a very low standby power consumption.

Adjusting volume

Switching channels

Remote Control

Press CH (up) /  㸦down) on the TV or press CH + / – on the remote

•

control.

Digital TV operation

For digital channels, press a number followed by a dot “•” and the

•

corresponding sub channel number.

–When selecting digital channel 1 1. 1

Be sure to press • before entering the subchannel number.

Remote Control

Press VOL/ on the TV or press VOL + / – on the remote control.

•

VOL (–) : Volume down VOL (+) : Volume up

Press  on the remote control to mute the sound.

•

Press  again or VOL + / – to recover the original sound.

•

Cable / NTSC (Analog) TV operation

–When selecting cable or analog channel 1 1

Press PREV.CH to return to the previously viewed channel.

Note(s)

To select the non-memorized channels, use the NUMBER buttons.

•

Channel not available or No signal will appear on the TV screen after the subchannel broadcast

•

is over. Audio only message will appear on the TV screen, when you receive only sound signal.

•

Continued on next page.

To reset the type

Before you begin:

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

20 .English

Watching channels from an external device

Switching each input mode can easily switch with the remote control between TV and external devices when they are connected to the unit.

Turn on the set-top box or the connected device.



Press SOURCE and use  to select the set-top box or the connected device and wait a few seconds till the picture appears.

Watch TV

Use the remote control of the set-top box or the connected device



to select channels.

HDMI3HDMI2HDMI1

Video

Access the Home menu

Press .

Lock or unlock your device from the Home menu

This section describes how to lock or unlock specified device.

Press SOURCE on the remote control.

Use  to select a device to lock or unlock.

Press OPTIONS on the remote control.

Use  to select Lock or Unlock, then press OK.

If device lock is unlocked, Lock will be displayed. If device lock is

•

locked, Unlock will be displayed at the top right of the device icons.

Enter your PIN. Change PIN  p. 37

Changing device type

You can change device icons displayed in the source list.

Press SOURCE on the remote control.

Use  to select the desired device.

Press red button on the remote control.

3 4

Use  to select the desired type, then press OK.

Press OPTIONS on the remote control at step 3, then select Original

•

icon.

Guide to Home menu

Watch TV

  Watch TV

  Source   Home Network   Net TV Wireless Screencasting  Setup

Home

Network

: Switches back to the TV source if another

source is selected.

: To select connected devices. : Accesses Home network menus. : Accesses Net TV menus. : Accesses Wireless Screencasting menus. : Accesses menus that allow you to

change picture, sound and other TV settings.

Screencasting

Wireless

SetupNet TVSource

Scan connections

You can rescan TV connections and update the source list.

You must set On in Master EasyLink.  p. 34

Press SOURCE on the remote control.

Use  to move the cursor to any device.

Press OPTIONS on the remote control.

Use  to select Scan connections, then press OK.

Continued on next page.

To change the favorite list

To remove a channel from the favorite list

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

21 .English

Create a list of favorite channels

You can create lists of your preferred TV channels so that you can find those channels easily.

Press OK while viewing a TV program.

1 2

Use  to select the desired channel, then press yellow button.

Use  to select the desired favorite list (Favorites 1 - Favorites 4), then press OK to add or remove on the list of favorite channels.

indicates that the channel is added.

•



indicates that the channel is removed.

•



The channel will be marked with ! icon.

•

Display the list of favorite channels

Press OK while viewing a TV program.

1 2

Use  to select Favorites.

Press blue button.

1 2

Use  to select the desired favorite list (Favorites 1 - Favorites 4).

Select the desired channel, then press yellow button.

1 2

Use  to select Yes, then press OK.

Changing Picture format

Display modes can be selected when your TV receives a 16:9 or 4:3 video signal.

Three types of display modes can be selected for a PC input signal. Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal

4:3Automatic

Unscaled or

Full*(1080i/p only)

Other than DTV and HDMI connected devices,

Automatic

4:3

Wide screen

Unscaled or Full

(1080i/p only)

* This part differs depending on the product you have.

enlarges the picture to best fit the screen. DTV and HDMI connected devices display the picture at its original size. The subtitles may remain visible.

Displays a 16:9 picture at a 4:3 size; the picture is shortened horizontally. Sidebars appear on both edges of the screen.

Displays a 16:9 picture that is stretched horizontally and vertically.

Displays a scaled 16:9 picture. Bars appear on both

the upper and lower portions of the screen depending on the type of video signal.

Wide screen

Continued on next page.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

22 .English

For 4:3 video signal

4:3Super zoomAutomatic

Wide screen

Movie expand 16:9

Movie expand 14:9

Other than DTV and HDMI connected devices, enlarges the picture to best fit the screen.

Automatic

DTV and HDMI connected devices display the picture at its original size. The subtitles may remain visible.

Displays a 4:3 picture at a 16:9 size; the picture is

Super zoom

stretched horizontally and vertically and its left and right edges are enlarged. This crops out some of the top and bottom of the picture.

4:3

Displays a 4:3 picture at its original size. Sidebars appear on both edges of the screen.

Displays a 4:3 picture at a 14:9 size; the picture is stretched horizontally and vertically.

Movie expand 14:9

This crops out some of the top and bottom of the picture. Sidebars appear on both edges of the screen.

Displays a 4:3 picture at a 16:9 size; the picture is

Movie expand 16:9

stretched horizontally and vertically. This crops out some of the top and bottom of the picture.

Wide screen

Displays a picture that is stretched out of proportion to fill the screen.

For PC input signal

UnscaledWide screen4:3

This unit can also be connected to your PC that has a DVI terminal.

•

Use an HDMI-DVI conversion cable for this video connection and it requires stereo mini 3.5mm plug audio cable for analog audio signal as well.

Refer to 16:9 video signal on this page if the PC has HDMI output.

•

4:3

Wide screen

Unscaled Displays a picture in its original size.

If the signal source has side or top-bottom bars inserted into the picture, the Picture format function will not eliminate them.

Displays a proportionately stretched picture. Sidebars appear on both edges of the screen.

Displays a picture that is stretched out of proportion to fill the screen.

TV screen information

You can display the currently selected channel or other information such as the aspect ratio on the TV screen.

In the digital mode, the detailed broadcasting information for the current off-the-air channel such as program title and program guides are displayed.

Press INFO.

ba c d

1 1.1 KABC



  



While the program guide is displayed, the closed caption function is interrupted.

•

The information display will automatically disappear in 5 seconds.

•

Resolution: Picture format:

Sound mode: Audio language:

Favorites:

Rating:

Sleeptimer:

Channel number / Input mode

Switching channels  p. 19

Watching channels from an external device  p. 20

Broadcast station Program title (for DTV only) CC (not available if Closed caption is set to Off)

Caption settings  p. 31

Program’s image aspect ratio

Changing Picture format  p. 21

Audio language (DTV) / Audio mode (Analog TV)

Sound  p. 30

Favorites

Create a list of favorite channels  p. 21

Child lock rating

Child lock  p. 36

Remaining time on sleep timer

Sleeptimer  p. 32

Press INFO to hide the information.

Note(s)

A Day of Memories

1080i Full

Stereo English English audio with description.

All

None

Continued on next page.

Before you begin:

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

Using options menu

You can access to some TV settings directly by using OPTIONS.

Press OPTIONS to display options menu, then press OK.

Use  to select a desired setting, then press OK.

Options

a b c d

Options



Following settings can be configured.

Closed captions

Digital audio language

Mono/Stereo

Controls



If you have our brand products such as Blu-ray disc player or DVD recorder that are compatible with EasyLink functions, connect them to this unit via an HDMI cable so you can simply operate various items from this unit’s remote control.

select a device connected to an HDMI connection.  p. 20 You must set On in Master EasyLink.  p. 34 Otherwise, LINK does not work even if you connected our brand devices to this unit.

Press OPTIONS to display options menu.

Use  to select Controls then press OK.

Use  to select the desired item, then press OK.

Device-menu

Device-contents

Device-favorite Controls the pop-up menu of your Blu-ray discs.

To choose the Closed captions display setting.

Closed captions  p. 31

To Select the language according to your preference. (It differs depending on the program.)

Digital audio language  p. 37

To Select an audio format.

Mono/Stereo  p. 37

Controls the menu of your connected EasyLink device.

Controls the top menu of your DVD or Blu-ray discs.

Picture and sound



Following settings can be configured.

Auto picture

Auto sound

Headphone volume

TV speakers

Picture format

Setup To display setup menu.

ECO settings



Following settings can be configured.

Switch off timer

Light sensor

To set predefined picture mode.

Picture  p. 28

To set predefined sound mode.

Sound  p. 30

To adjust headphone volume.

Sound  p. 30

To Select the audio output from the unit’s speakers or not.

Sound  p. 30

To switch the TV aspect ratio.

Changing Picture format  p. 21

You can turn off the unit automatically when there is no operation for specified time. In spite of this setting, the unit goes into standby mode automatically if there is no signal input and no user operation for 15 minutes.

Press  repeatedly to change the amount of time (increases the time by 30 minutes up to 240 minutes).

Each press of  will decrease the time by 30 minutes.

To cancel the timer, press  repeatedly until “0” is displayed.

To set light sensor On or off.

Picture  p. 28

23 .English

Note(s)

Some of EasyLink functions may not be available depending on your EasyLink devices or

•

discs. You must connect this unit to our brand EasyLink devices and be sure its EasyLink (HDMI CEC)

•

setting is also set to On. We do not guarantee 100% interoperability with other brands of HDMI link compliant devices.

•

Continued on next page.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

24 .English

USB

Your TV is fitted with a USB connection that enables you to view photos, listen to music or watch video files stored on a USB memory stick.

Press SOURCE and use  to select USB, then press OK.

Use  to select the desired file, then press OK.

Photo

folder_A folder_B folder_C folder_D folder_E

These recorded files must meet specifications shown below:

•

Picture (JPEG / Progressive JPEG)

JPEG Upper limit 4000x4000 pixels

Progressive JPEG Upper limit 1024x768 pixels

Music (MP3 / WAV / AAC)

MP3

WAV

AAC

Photo

Sample picture.jpg

Sampling frequency 16 kHz - 48 kHz

Constant bit rate 8 kbps - 320 kbps

Sampling frequency 8 kHz - 48 kHz

Constant bit rate 64 kbps - 1.5 Mbps

Sampling frequency 8 kHz - 48 kHz

Constant bit rate -

Note(s)

This unit accepts USB memory stick only. Other storage devices such as external HDD by USB

•

bus power will not work. Do not use an extension cord and/or USB hub to connect devices to this unit. Always directly

•

insert the USB flash memory stick to this unit directly. We cannot be held responsible if your USB memory stick is not supported, nor will we accept

•

any liability for damage or loss of stored data. The USB memory stick is not supplied with this TV.

•

A maximum of 1,023 folders or files can be recognized.

•

A file name exceeding 256 characters or contains a dot character is not supported on this TV.

•

A USB memory stick that required its own driver or the device with a special system such as

•

fingerprint recognition are not supported. Be sure to keep a backup copy of the original files on your USB device before you play them

•

back on this unit. We have no responsibilities for damage or loss of your USB stored data. To avoid damaging the USB memory stick and the unit always turn off the unit before you

•

remove the USB memory stick. This unit is not allowed to use the USB memory stick which requires external power supply (500

•

mA or more). This unit does not support MTP (Media Transfer Protocol) or the file other than FAT16 and FAT32

•

file system. If the file is not supported, an error message appears. When the unit does not recognize the USB memory stick, try reconnecting it.

•

Playing the files recorded with high bit rates, the images can be interrupted in some occasions.

•

This unit does not support external subtitles.

•

This unit cannot play back a file which goes over the limit of file restriction limit.

•

Video (MPEG / VOB / AVI / MP4)

Maximum video

Extension .avi

Video codec

Audio codec

MPEG1, MPEG2, MPEG4,

H.264

H.264, H.265/HEVC,

MPEG: 1920x1080@60fps

.mpg,

.mpeg

.ts,

.trp,

.vob .mp4 .mkv

.tp

MPEG1, MPEG1, MPEG2, MPEG4

MPEG2,

H.264,

H.265/

MPEG1, MPEG2

HEVC

MPEG1, MPEG2, MPEG4,

H.264, H.265/

HEVC

Dolby Digital YES YES YES YES YES YES

MPEG1/2 audio

layer1/2/3

YES YES YES YES NO YES

LPCM YES YES YES YES YES YES

AAC-LC YES YES YES YES YES YES

MPEG1, MPEG2,

MPEG4,

H.264,

H.265/

HEVC

Continued on next page.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

25 .English

Viewing photos

Use  to select Photo, then press OK.

Use  to select the desired item, then press OK.

Press OK or . to start a slide show of the files.

Press OK or . to pause the slide show.

•

The . icon appears.

•

Press  or  to move between images.

•

Press BACK or . to stop the slide show.

•

Press OPTIONS to display the optional menu, then use  to

•

select the desired item.

Off Sets repeat playback to off.

Repeat *1

Slide time

Transitions *1

Rotate

Zoom

Auto picture

*1 You can set Repeat, Slide time, Transitions and Auto picture when

images are in slide show.

*2 You can set Rotate and Zoom when slide show is in pause mode.

One Sets repeat playback for a selected image file.

All

Short Switches to the next image in 5 seconds.

Medium Switches to the next image in 10 seconds.

Long Switches to the next image in 15 seconds. None No effect when switching images.

Dissolve Overlaps the next image on the current image.

Wipe right Pushes the current image out from left.

Wipe left Pushes the current image out from right.

Wipe up Pushes the current image out from bottom.

Wipe down Pushes the current image out from top.

Box in

Box out

90 Rotates an image 90 degrees clockwise.

180 Rotates an image 180 degrees clockwise.

270 Rotates an image 270 degrees clockwise.

1X Displays an image in its original size. 2X Magnifies a current image by 2 times. 4X Magnifies a current image by 4 times.

Selects the picture mode according to your preference.

(Standard, Natural, Vivid, Sports, Movie, Game, Energy saving and Internet video)

Sets repeat playback for all image files in the current folder.

The next image comes to the center from the outside.

The next image goes to the outside from the center.

0 Displays an image in its original direction.

Playing music

Use  to select Music, then press OK.

Use  to select the desired item, then press OK.

Press OK or . to play the selected files.

Press OK or . to pause, then press OK or . again to resume.

•

Press  to fast-forward search.

•

Press  to fast-backward search.

•

Press . to stop playback.

•

Press OPTIONS to display the optional menu, then use  to

•

select the desired item.

Off Sets repeat playback to off.

Repeat

Shuffle

TV Speakers

Auto sound

One

All

Off Sets shuffle playback to Off.

Off

Speakers

EasyLink

Selects the sound mode according to your preference. (Standard, Vivid, Sports, Movie, Music and News)

Sets repeat playback for a selected music file.

Sets repeat playback for all music files in the current folder.

Sets shuffle playback for all music files in the current folder.

The sound will not be output from the unit's speakers.

The sound will be output from the unit's speakers.

You can control audio output from your connected EasyLink compliant devices with VOL + / – by using this unit's remote control.

Continued on next page.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

Playing movies

Use  to select Movie, then press OK.

Use  to select the desired item, then press OK.

Press OK or . to play the selected files.

Press OK or . to pause, then press OK or . again to resume.

•

Press  to fast-forward search.

•

Press  to fast-backward search.

•

Press . to stop playback.

•

Press . to resume from the point at which playback was stopped. Press OK to play from the beginning of the file.

Press OPTIONS to display the optional menu, then use  to

•

select the desired item.

Off Sets repeat playback to off.

Repeat

TV speakers

Auto picture

Auto sound

One

All

Off

Speakers EasyLink

Selects the picture mode according to your preference. (Standard, Natural, Vivid, Sports, Movie, Game, Energy saving and Internet video)

Selects the sound mode according to your preference. (Standard, Vivid, Sports, Movie, Music and News)

Sets repeat playback for a selected video file.

Sets repeat playback for all video files in the current folder.

The sound will not be output from the unit's speakers.

The sound will be output from the unit's speakers.

You can control audio output from your connected EasyLink compliant devices with VOL + / – by using this unit's remote control.

26 .English

Note(s)

The resume information will be kept even when the unit is Turned off.

•

If you play another file while the previously viewed file is being resumed, the resume information

•

of the previously viewed file will be deleted. The file or the folder in resume stop mode will be highlighted in gray on List or Thumbnails.

•

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

4 Getting more from your

This section describes the overview of the Setup menu displayed when you press  and use  to Select Setup.

The Setup menu consists of the function setting items below.

Press  to display the Home menu.

Picture and sound setup

Guides you to get the best picture and sound settings.

 p. 28

27 .English

Use  to select Setup, then press OK.

Use  to select the desired menu and an item, then press OK.

Picture and

sound setup

settings

To quickly set basic picture and sound settings, press OK

Network

Search for

channels

Channel settings

Net TVSource Home

Connect to

network

Network

settings

Wireless

Screencasting

software

Software

settings

Setup

Update

TV settings

Accesses menus that allow you to change picture, sound and TV usage settings.

Search for channels

Guides you through channel installation.

Channel settings

Accesses menus that allow you to change channel settings.

Connect to network

Guides you through network installation.

Network settings

 p. 28

 p. 35

 p. 38

 p. 39

Accesses menus that allow you to network settings.

Update software

Guides you through an update of the TV software.

Software settings

Accesses menus that allow you to change software settings.

 p. 43

 p. 44

Continued on next page.

Before you begin:

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

28 .English

Picture and sound setup

You must set Home in Location.  p. 33 Otherwise, personalized picture and sound settings will not be

memorized after the unit goes into standby mode.

Press  and use  to select Setup then press OK.

Use  to select Picture and sound setup, then press OK.

Follow steps 8 to 9 in Initial setup  p. 18

TV settings

Picture

You must set Home in Location.  p. 33 Otherwise, personalized picture and sound settings will not be

memorized after the unit goes into standby mode.

Press  and use  to select Setup then press OK.

Use  to select TV settings, then press OK.

Use  to select Picture, then press OK.

Picture

Sound Features Installation

Use  to select the item you want to adjust, then press OK.

The following picture settings can be configured. Depending on the format of the picture source, some picture settings are not available.

Auto picture

Auto picture Backlight Contrast Brightness Color Tint Sharpness Pixel Plus HD Advanced settings Picture format Mode selection Auto adjustment Clock

To set your TV to a predefined picture setting.

Personal

Standard For normal TV viewing.

Natural

Vivid

Sports

Movie

Game

Energy saving

Internet video

The customized settings you defined using the Picture menu.

Ideal picture mode for viewing high quality content without any picture enhancements.

Enhanced picture contrast and sharpness for viewing in a well-lit room.

Brilliant picture settings for high action.

Deep picture settings for a cinematic experience.

Optimized for PCs and game consoles.

Eco TV settings for low power consumption.

Optimized for low bit-rate internet video.

When you adjust the following settings, Personal picture will be set automatically.

Cursor  Cursor 

Backlight

Contrast To decrease contrast To increase contrast

Brightness To decrease brightness To increase brightness

Color

Tint To add green To add red

Sharpness To soften To sharpen

Pixel Plus HD

Advanced settings

Picture format

Mode selection

Auto adjustment

Clock

Phase

Horizontal position To move PC screen left To move PC screen right

Vertical position

Adjusts backlight for the best picture quality by dynamically adjusting

the backlight intensity in accordance with the room lighting condition when the Light sensor feature is set to On. Please ensure the room lighting is stable and the light sensor is not blocked.

To reduce power consumption and brightness

To decrease color intensity

Enters sub-menus to adjust the following settings: (Dynamic contrast, Color enhancement, Black

stretch, 120 PMR, Noise reduction and MPEG artifact reduction)

Enters sub-menus to adjust the following settings: (Color alignment, Custom color management,

Light sensor

Movie expand 14:9

Movie expand 16:9

To adjust the horizontal / vertical position, clock and phase of the PC screen automatically

To decrease setting value

To move PC screen down

*, Gamma and Film mode)

Automatic

Super zoom

4:3

Wide screen

Unscaled

HDTV

Cursor  Cursor 

To increase power consumption and brightness

To increase color intensity

Changing Picture format  p. 21

To turn off image enhancement features which makes the TV to act purely as a monitor

To enable image enhancement features to improve picture quality

To increase setting value

To move PC screen up

Continued on next page.

You may adjust picture quality and enhancement settings using Pixel

Plus HD and Advanced settings sub menus.

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

Auto picture Backlight Contrast Brightness Color Tint

Dynamic contrast

Color enhancement Black stretch 120 PMR Noise reduction MPEG artifact reduction

O Minimum Medium Maximum

Sharpness

Pixel Plus HD

Advanced settings Picture format Mode selection Auto adjustment Clock

Dynamic

contrast

Color

enhancement

Black

stretch

120 PMR

Noise

reduction

MPEG

artifact

reduction

To select the desired setting, then press OK (Off, Minimum, Medium and Maximum)

Off To set color enhancement to off

On To make colors more vivid and bright

To select the desired setting, then press OK (Off, Minimum, Medium and Maximum)

Off To set 120 PMR to Off

On To make the video appear smoother

To select the desired setting, then press OK (Off, Minimum, Medium and Maximum)

Auto picture Backlight Contrast Brightness Color Tint Sharpness

Color alignment

Custom color management Light sensor Gamma Film mode

Mode Red gain Green gain Blue gain Red oset Green oset Blue oset

Pixel Plus HD

Advanced settings

Picture format Mode selection Auto adjustment Clock

To set the color temperature to Personal,

Mode

Cool, Normal and Warm.

When you adjust the following settings,

Personal will be set automatically.

Cursor  Cursor 

Color

alignment

Red gain

Green gain

Blue gain

Red offset

Green offset

Blue offset

To decrease red contrast

To decrease green contrast

To decrease blue contrast

To decrease red brightness

To decrease green brightness

To decrease blue brightness

To increase red contrast

To increase green contrast

To increase blue contrast

To increase red brightness

To increase green brightness

To increase blue brightness

To select the desired setting, then press OK (Red, Yellow, Green, Cyan, Blue and Magenta)

Cursor  Cursor 

To rotate only selected color tint in counterclockwise direction

To increase color with only selected color

To increase brightness with only selected color

Custom color management

Tint

Saturation

Brightness

To rotate only selected color tint in clockwise direction

To decrease color with only selected color

To decrease brightness with only selected color

Off To set light sensor to off

Light sensor

To adjust backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room

To select the desired setting, then press OK

Gamma

(Very Dark Room, Dark Room, Normal, Bright Room and Very Bright Room)

Off To set film mode to off

Film mode

Adjusts backlight for the best picture quality by dynamically adjusting

the backlight intensity in accordance with the room lighting condition when the Light sensor feature is set to On. Please ensure the room lighting is stable and the light sensor is not blocked.

Note(s)

Mode selection is available only if

•

–The external input modes are selected HDMI 1, HDMI 2 or HDMI 3. –The connected HDMI device is outputting a video signal.

Auto

To optimize the picture recorded by the original film

29 .English

Continued on next page.

Before you begin:

55PFL4901, 50PFL4901, 43PFL4901 serial numbers beginning with DS6

30 .English

Sound

You must set Home in Location.  p. 33 Otherwise, personalized picture and sound settings will not be

memorized after the unit goes into standby mode.

Press  and use  to select Setup then press OK.

Use  to select TV settings, then press OK.

Use  to select Sound, then press OK.

Picture

Sound

Features Installation

Use  to select the item you want to adjust, then press OK.

The following sound settings can be configured. Depending on the format of the broadcasting, some sound settings are not available.

Auto sound

Adjust the tonal quality for each frequency.

Equalizer

Adjust the speakers to suit your listening preference.

Balance

Auto sound Equalizer Balance Sonic Emotion Premium Auto volume leveling TV speakers Headphone volume Digital output format Delta volume

To set your TV to a predefined sound setting. When you adjust the following settings (Equalizer,

Sonic Emotion Premium and Auto volume leveling), Personal sound will be set automatically.

Personal

Standard For normal TV viewing.

Vivid Enhanced sound.

Sports Clear sound for high action.

Movie

Music Optimized for music playback.

News

To adjust each level of tonal quality Press BACK to go back to the previous menu.

To adjust the balance of the right and left speakers

The customized settings you defined using the Sound menu.

Powerful sound settings for a cinematic experience.

Set the anchor's voice at a comfortable volume.

Cursor  Cursor 

This selects sound modes for more spatial or surround sound reproduction.

Sonic

Emotion

Sonic

Emotion

Premium

This function keeps a constant Loudness differential between the TV commercials and the programs.

Auto volume

leveling

You can select the audio output from the unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure Master EasyLink is set to On.  p. 34

TV speakers

Adjust headphone volume.

Headphone

volume

You can set the digital audio output format from SPDIF/ARC.

Digital output

If a channel or input device is too loud or too soft, navigate to that channel or input device.

Delta volume

Dialog

Enhancement

Bass

Enhancement

Absolute 3D

Sound

format

Off To set Sonic Emotion to off On To set Sonic Emotion to on Off To set Dialog Enhancement to off On To set Dialog Enhancement to on Off To set Bass Enhancement to off On To set Bass Enhancement to on Off To set Absolute 3D Sound to off On To set Absolute 3D Sound to on

Off

Speakers EasyLink

To decrease or increase volume

PCM To output PCM format

Bitstream

Provides the ability to set a custom volume level for the current channel or input source.

If the source volume is too loud, set a negative value (-1 to -12)

If the source volume is too soft, set a positive value (+1 to +12)

To remove the Auto volume leveling

To reduce volume differences between the TV commercials and the programs

No output sound from the unit’s speakers

To output sound from the unit’s speakers

To control audio output from your connected EasyLink compliant devices with VOL + / – by using this unit's remote control.

Cursor  Cursor 

To output audio in its native format as Bitstream to connected audio receiver

Cursor  Cursor 

Continued on next page.

+ 84 hidden pages

Philips 55PFL4901/F7, 43PFL4901/F7 user manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Important safety instructions

Positioning the TV

Environmental care

Preparing to move / ship the unit

Regulatory notices

Features

Supplied accessories

Symbols used in this User manual

Stand assembly

Attaching the base

Installing the remote control batteries

Remote control

Control panel

Terminals

Connecting Antenna or Cable / Satellite / IPTV set-top box

Plugging in the AC power cord

Selecting your connection quality

HDMI - Highest quality

Component (Y Pb Pr) - High quality

Connecting your devices

HDMI digital connection

Composite - Basic quality

HDMI-DVI connection

HDMI-ARC connection

Component analog video connection

Composite analog video connection

Connecting the TV to the internet using an Ethernet cable

Connecting the TV to the internet using a wireless LAN

Digital audio output connection

PC connection

USB memory stick

Initial setup

Switching on your TV and putting it in standby mode

Adjusting volume

Switching channels

Watching channels from an external device

Access the Home menu

Lock or unlock your device from the Home menu

Changing device type

Guide to Home menu

Scan connections

Create a list of favorite channels

Display the list of favorite channels

Changing Picture format

TV screen information

Using options menu

Viewing photos

Playing music

Playing movies

Picture and sound setup

TV settings

Picture

Sound