Philips 32PFL4609/F7, 55PFL4609/F7 user manual

www.philips.com/support

65PFL4909 55PFL4909 55PFL4609 50PFL4909 49PFL4909 49PFL4609 43PFL4909 43PFL4609 40PFL4909 40PFL4609 32PFL4909 32PFL4609 28PFL4909 28PFL4609

ENUser Manual

Manual del Usuario



Manuel d’Utilisation



EN For further assistance, call the customer support service in your country.

• To obtain assistance, contact Philips Customer Care Center;

In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands 1 866 226 1568 México D.F. and Área Metropolitana; 58 87 97 36 Interior de la Republica; 01 800 839 19 89

ES Para obtener más información, llame al servicio de soporte al cliente de su país.

• Para obtener asistencia, comuníquese con el Centro de atención al cliente de Philips;

En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los Estados Unidos; 1 866 226 1568 México D.F. y Área Metropolitana; 58 87 97 36 Interior de la Republica; 01 800 839 19 89

FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service

à la clientèle de votre pays.

• Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au; Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines; 1 866 226 1568 México D.F. et Área Metropolitana; 58 87 97 36 Interior de la Republica; 01 800 839 19 89

Contents

2 .English

1 Notice ......................................................................................................................... 5

2 Important ................................................................................................................ 7

Positioning the TV Regulatory Notices Environmental Care Preparing to Move / Ship the Unit

3 Getting Started ............................................................................................... 8

Features Supplied Accessories Symbols used in this User Manual Stand Assembly Attaching the Base Managing Cables Installing the Remote Control Batteries Remote Control Control Panel Terminals Connecting Antenna or Cable / Satellite / IPTV Box Plugging in the AC Power Cord Selecting your Connection quality Connecting your Devices Initial Setup

10 12 12 13 14 14 15 15 16 16 20

Sound Features

Caption settings Sleep timer

7 7 7 7

8 8 8 9

Child and Ratings Lock Change PIN

Installation

Language Channel installation Preferences Use Philips EasyLink Network Return your settings to default values

Software

Checking your current software version Preparing for the software upgrade Upgrading the software Automatically check for latest software Netflix deactivation Netflix ESN VUDU deactivation YouTube deactivation License Philips Wirelessconnect View photos, play music and watch videos using DLNA Net TV PandoraN operations

32 33 33 34 34 36 36 36 37 38 38 40 44 44 44 45 45 46 46 46 46 46 46 47 48 50 51

4 Use your TV ....................................................................................................

Switching on your TV and putting it in Standby mode Adjusting Volume Switching Channels Watching Channels from an External Device Access the Home menu Using auto mode Create and use lists of favorite channels Changing Picture Format TV Screen information USB

22 22 22 23 23 24 24 25 26 26

5 Making more use with your TV ............................................ 29

Settings assistant Picture

30 30

6 Useful tips ...........................................................................................................

FAQ Troubleshooting

52 53

7 Information ........................................................................................................ 55

Glossary Maintenance

55 55

8 Specifications ................................................................................................... 56

9 Warranty .............................................................................................................. 57

License ................................................................................................. end of book

●

Displays and illustrations may differ depending on the product you purchase.

Know these safety symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The caution marking is located on the rear or bottom of the cabinet.

CAUTION

Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Register Online at www.productrecords.com/phl to ensure:

to get the very most from your purchase.

*Product Safety Notification *Additional Benefits

By Registering your Product, you'll receive notification directly from the manufacturer - in the rare case of a Product Recall or Safety Defect.

Registering your Product guarantees that you'll receive all of the Privileges to which you're Entitled, including special money-saving offers.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall

not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION

: Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la

prise et pousser jusqu’au fond.

Visit our World Wide Web Site at www.philips.com/support

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

• As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional

installation if you have any doubts about your ability to safely mount your television.

• ALWAYS use a mount that has been recommended by

the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).

• ALWAYS follow all instructions supplied by the

television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you

are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.

• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.

• NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.

• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

CE.org/safety

3 .English

Important Safety Instructions

1.1. Read these instructions.

Read these instructions.

2.2. Keep these instructions.

Keep these instructions.

3.3. Heed all warnings.

Heed all warnings.

4.4. Follow all instructions.

Follow all instructions.

5.5. Do not use this apparatus near water.

Do not use this apparatus near water.

6.6. Clean only with dry cloth.

Clean only with dry cloth.

7.7. Do not block any ventilation openings. Install in

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8.8. Do not install near any heat sources such as radiators,

Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9.9. Do not defeat the safety purpose of the polarized or

Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11.

Only use attachments / accessories specified by the

manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or

sold with the apparatus. When a cart

is used, use caution when moving the

cart / apparatus combination to avoid

injury from tip-over.

13.

Unplug this apparatus during lightning storms or when

unused for long periods of time.

14.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, speciﬁes that the cable ground

shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

Example of Antenna Grounding as per NEC - National

Electric Code

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC SERVICE EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

POWER SERVICE GROUNDING ELECTRODE

SYSTEM (NEC ART 250, PART H)

GROUND CLAMPS

• The recommended Wall Mount Bracket Kit (sold separately) allows the mounting of the TV on the wall.

• For detailed information on installing the wall mount, refer to the Wall Mount Instruction Book.

• Funai Corporation is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV Wall Mount Bracket or mount the TV onto the Bracket on your own.

• The Wall Mount Bracket must be installed by experts.

Funai Corporation is not liable for these types of accidents or injury noted below.

• Install the Wall Mount Bracket on a sturdy vertical wall.

• If installed onto a ceiling or slanted wall, the TV and Wall

Mount Bracket may fall which could result in a severe injury.

• Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside the TV set. If screws too short are used this may cause the TV set to fall.

• Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to an injury.

• For safety reasons use 2 people to mount the TV onto a Wall Mounting Bracket.

• Do not mount the TV onto the Wall Mounting Bracket while your TV is plugged in or Turned On. It may result in an electrical shock injury.

hen installing the unit on the wall, allow this much space.

Top: 11.8 inches (30cm) Left and right side: 5.9 inches (15cm) Bottom: 3.9 inches (10cm)

4 .English

Wall Mount Bracket Kit

Brand Model # Screw dimension

65PFL4909 55PFL4909 /

55PFL4609 / 50PFL4909 / 49PFL4909 / 49PFL4609

43PFL4909 / 43PFL4609 / 40PFL4909 / 40PFL4609

32PFL4909 / 32PFL4609 / 28PFL4909 / 28PFL4609

SANUS

F80b

PLA50B

SAN25BB

SAN18B

M6 x 0.472” (12mm)

M4 x 0.472” (12mm)

1 Notice

Trademarks are the property of Koninklijke Philips N.V. or their respective owners.

Funai Corporation reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The material in this manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Funai Corporation warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Funai Corporation cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of t

he content in this document. Errors reported to Funai Corporation will be adapted and published on the Funai Corporation support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural proper ty of the display (within common industry standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers t

o the inside of the product. Repairs may only be done by Service Centers and official repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this manual, any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television

technician for help.

Modifications

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless t

he modifications are expressly approved in the User Manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

Cables

Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC Rules and Regulations.

Canadian notice

CAN ICES-3 (B)/NMB-3 (B) Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.

The following FCC/IC RSS-Gen is description of

Wireless LAN adapter.

FCC Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could void the

user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

Country Code Statement

For product available in the USA market, only channel 1~11 can be

operated. Selection of other channels is not possible.

To maintain compliance with FCC RF exposure requirements, use

only belt-clips, holsters or similar accessories that do not contain

metallic components in its assembly. The use of accessories that do

not satisfy these requirements may not comply with FCC RF

exposure requirements and should be avoided.

FCC Radiation Exposure Statement

This equipment is compliance with SAR for general population/

uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had

been tested in accordance with the measurement methods and

procedures specified in OET Bulletin 65 Supplement C. This

equipment should be installed and operated with minimum distance

2.5cm between the radiator & your body.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

5 .English

Declaration of Conformity

PHILIPS

Trade Name Responsible Party Model

Address

Telephone Number

This is not the mailing address for Open Source Software or Customer service.

Funai Corporation, Inc.

65PFL4909, 55PFL4909, 55PFL4609,

50PFL4909, 49PFL4909, 49PFL4609, 43PFL4909, 43PFL4609, 40PFL4909, 40PFL4609, 32PFL4909, 32PFL4609, 28PFL4909, 28PFL4609

12489 Lakeland Road, Santa Fe Springs, CA

90670, USA* 1 866 226 1568

All other registered and unregistered trademarks are the proper ty of t

heir respective owners.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

Consumer Notice:

This TV has been set to maximize energy efficiency while delivering t

he best possible picture using the factory installed home mode settings.

Changing or enabling other features in this TV (e.g. brightened backlighting) will possibly increase energy consumption beyond the original ENERGY STAR

qualified limits.

DLNA®, the DLNA Logo and DLNA CERTIFIED

are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

Netflix is available in certain countries. Streaming membership required. More information at www.netflix.com.

YouTube and the YouTube logo are trademarks of Google Inc.

CloudTV™ (CloudTV™ by ActiveVideo

) technology provided

under license from ActiveVideo Networks, Inc. U.S. and Foreign Patents apply. CloudTV™ and the “CloudTV™” logo are proprietary trademarks of ActiveVideo Networks, Inc.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.

CinemaNow and the CinemaNow logo are trademarks of BestBuy Stores L.P. and BestBuy Canada LTD.

* CinemaNow is supported in 65PFL4909, 55PFL4909, 50PFL4909,

Portico, Portico TV and the Portico logo are service marks of Net2TV Corporation.

The American Academy of Pediatrics discourages television viewing for children younger than two years of age.

49PFL4909, 43PFL4909, 40PFL4909, 32PFL4909, 28PFL4909 only.

6 .English

* 65PFL4909 is not ENERGY STARN qualified.

• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.

• Make sure to hold the upper and bottom frames of the Unit firmly as illustrated.

• Install the Unit in a horizontal and stable position.

• Do not install the Unit in direct sunlight or in a place subject to dust or strong vibration.

• Depending on the environment, the temperature of this Unit may increase slightly. This is not a malfunction.

• Avoid a place with drastic temperature changes.

• Do not place anything directly on top or bottom of the Unit.

• Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the Unit is placed too close to them. In this case, please ensure enough space between the external devices and the Unit.

• Do not insert the AC power cord into the power socket outlet before all the connections are made.

• Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power.

• Before you move the TV, disconnect attached cables to prevent damage to connectors.

• Be sure to unplug the AC power cord from the AC outlet before moving or carrying the Unit.

• When moving the TV, please be careful not to pinch the AC power cord under the unit.

Do not place the Unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling Unit can cause serious injury or even death. This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 4 inches (10cm) or more around this apparatus. Press to turn the Unit on and go into standby mode. To completely turn off the Unit, you must unplug the AC power cord. Disconnect the AC plug to shut the Unit off when trouble is found or not in use. The AC plug shall remain readily available.

AC plug

Never use a gas duster on this TV. The gas trapped inside of this Unit may cause ignition and explosion.

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall

not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: To prevent injury, this apparatus must be securely

attached to the furniture / wall in accordance with the instructions. Tipping, shaking or rocking the unit may cause injury / death.

The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle

he packaging.

For product recycling information, please visit - www.recycle.philips.com

Philips pays a lot of attention to produce environmental-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

Disposal of Used Batteries

The Batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas Batteries may not be disposed of with your household waste. Please ensure you dispose of Batteries according to local Regulations.

Please pack the Unit properly by following the Diagram on the Carton.

12 3 4

To avoid damage to the Screen, do not pack the stand on the same side as the TV screen.

7 .English

2 Important

Positioning the TV

Environmental Care

End of Life Directives

Regulatory Notices

Preparing to Move / Ship the Unit

AAA

55PFL4909 / 55PFL4609 / 50PFL4909 / 49PFL4909 / 49PFL4609 /

43PFL4609 / 40PFL4609

32PFL4609 / 28PFL4609 3

32PFL4909 / 28PFL4909 3

43PFL4609 / 40PFL4609 / 32PFL4609 / 28PFL4609

43PFL4909 / 40PFL4909 / 32PFL4909 / 28PFL4909

55PFL4609 / 49PFL4609

65PFL4909

55PFL4909 / 50PFL4909 / 49PFL4909

65PFL4909 8

43PFL4909 / 40PFL4909

SizeQuantityModel

Screws packed with this Unit.

TV base and Screws

Quick Start guideUser Manual

M4 x 0.551”(14mm)

M4 x 0.984”(25mm)

M4 x 0.787”(20mm)

M4 x 0.393”(10mm)

M4 x 0.472”(12mm)

(AAA, 1.5V x 2)

Remote Control and

Batteries

Digital TV Operation

Cable / NTSC (Analog) TV Operation

8 .English

3 Getting Started

Features

●

DTV / Analog TV / CATV

You can use and conventional Analog format. Also, Cable and Satellite subscribers can access their TV channels.

●

Information display

You can display on the TV screen the Title, contents (DTV only) and other information on the current Program.

●

Autoprogram

This Unit Automatically scans and memorizes channels available in your area, Eliminating difficult Setup procedures.

●

Net TV

This unit lets you enjoy Internet services. Use the remote control to browse the Net TV pages. You can play movies and much more, all from your TV screen.

●

Child lock

This feature allows you to Block children’s access to inappropriate Programs.

●

Closed Caption decoder

Built-in Closed Caption decoder displays text for Closed Caption supported Programs.

●

MTS / SAP tuner

Audio can be selected from the Remote Control.

●

Auto Standby

If there is no Input Signal and no operation for 15 minutes, the Unit will go into Standby mode Automatically.

●

Sleep Timer

You can set the Unit to go into Standby mode after a specific amount of time.

●

Choices for On-screen language

Select your On-screen language: English, Spanish or French.

●

Stereo sound function

●

PLL frequency synthesized tuning

Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point “•” keys on the Remote Control.

●

Various adjustments for Picture and Sound

Customizes picture quality suitable for your room and sets your sound preference.

●

EasyLink via HDMI link

EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV.

●

HDMI Input

●

HDMI-DVI Input

If your Video Device has a DVI Output jack, use an HDMI-DVI Conversion Cable to connect the Unit.

●

Component Video Input

●

PC Input

●

AV Input

Audio and Video Input from an External Device.

●

USB terminal

The Picture (JPEG), Music (MP3) and Video files stored on a USB Memory Stick can be played back on this unit.

●

Digital Audio Output

●

Headphone Audio Output

Headphone 3.5mm Stereo jack for personal listening.

your Remote Control to select channels which are Broadcast in Digital format

Supplied Accessories

Note(s)

●

If you lose the Screws, please purchase the above-mentioned Phillips head Screws at your local store.

●

If you need to replace these accessories, please refer to the part name or No. with the illustrations and call our toll free customer support line found on the cover of this User Manual.

When using a Universal Remote Control to operate this Unit.

●

Make sure the component code on your Universal Remote Control is set to our brand. Refer to the instruction book accompanying your Remote Control for more details.

●

We Do Not guarantee 100% interoperability with All Universal Remote Controls.

Symbols used in this User Manual

The following is the description for the symbols used in this User Manual. Description refers to:

●

If neither symbol appears, the operation is applicable to both.

Continued on next page.

Stand Assembly

65PFL4909

× 2

55PFL4909 / 50PFL4909 / 49PFL4909

× 4

55PFL4609 / 49PFL4609

× 4

9 .English

Continued on next page.

Attaching the Base

65PFL4909

× 4

55PFL4909 / 55PFL4609 / 50PFL4909 / 49PFL4909 / 49PFL4609

× 4

43PFL4909 / 40PFL4909

× 3

M4 x 0.787” (20mm)

× 2

M4 x 0.393” (10mm)

You must attach the base to the Unit to have it as a table top Unit. Be sure the front and rear of the base match the proper direction. For large screen TVs, at least 2 people are required for these steps.

10 .English

Continued on next page.

43PFL4609 / 40PFL4609 / 32PFL4609 / 28PFL4609

× 3

32PFL4909 / 28PFL4909

× 2

× 1

11 .English

Note(s)

●

Make sure to Unit.

●

Make sure the table is in a stable location.

●

When attaching the base, ensure that All Screws are tightly fastened. If the base is not properly attached, it could cause the Unit to fall, resulting in injuries as well as damage to the Unit.

●

To remove the base from this Unit, unscrew the Phillips head screws by reversing the procedure. Be careful not to drop the base when you remove it.

use a table which can support the weight of this Unit and is larger than this

Continued on next page.

Managing Cables

Route your antenna cable and all other cables through the cable management tie* at the back of the TV.

The holder helps keep your cables tidy and easily manageable.

Attach the cable management tie as illustrated below.

Pass cables through the cable management tie to avoid tangles.

12 .English

* The cable management tie is not supplied with your TV. If you would

like this part, please call our toll free customer support line found on the cover of this User Manual, and it will be sent to you for free of charge.

Installing the Remote Control Batteries

Slide the battery cover off the back of the Remote Control.

Insert 2 Supplied Batteries (AAA, 1.5V). Be sure the + and – ends

of the Batteries line up with the markings inside the case.

Slide the cover back into position.

Note(s)

●

Remove the Batteries if not using the Remote Control for an extended period of time.

Continued on next page.

Remote Control

B (POWER)

Turns the TV On from Standby or Off to Standby.

VUDU

Access directly to VUDU.

EasyLink (HDMI CEC) buttons

JJ / KK K F

Note(s)

●

Pause may not work properly on some devices even if they are EasyLink (HDMI CEC) compliant.

YOUTUBE

: Searches Backward or Forward through the disc.

: Starts, pauses or resumes playback.

: Stops the Disc playback.

Access directly to YouTube.

Q (MENU)

Displays the main menu.

INFO

Displays Information about the current program.

Press to decide the command of setting when the Home menu is displayed.

H I J K (NAVIGATION buttons)

Moves the cursor, Selects the On-screen Menu items.

U OPTIONS

Displays a list of menu items applicable to the highlighted object or screen.

S SOURCE

Selects Connected devices.

CH + / –

Selects a Channel.

Apps (APP1 / APP2 / APP3 / APP4) buttons

Works as direct access to user specified net apps.

0 - 9 (NUMBER buttons)

Used to enter a Channel / Program number.

• (DOT) : Use with 0-9 to select digital channels. For example, to enter 2.1, press

PREV.CH : Returns to the previously viewed Channel.

V (MUTE)

Turns the Sound On and Off.

VOL + / –

Adjusts the Volume.

Y BACK

Returns to the previous Menu operation.

R FORMAT

Adjusts the Picture size on the TV screen.

NET TV

Access to Net TV menu directly.

NETFLIX

Access directly to Netflix.

13 .English

Continued on next page.

cba

k l

14 .English

Control Panel

Remote Control Sensor

Receives IR signal from Remote control.

Ambient Light Sensor

Alters the brightness of the TV screen automatically by detecting your room lighting level. Do not block this Light Sensor window which allows proper operation.

* 65PFL4909 / 55PFL4909 / 55PFL4609 / 50PFL4909 / 49PFL4909 / 49PFL4609 / 43PFL4909 / 43PFL4609 / 40PFL4909 / 40PFL4609 only.

Power On / Standby Indicator

(On : lights in white, Standby : no light)

B (POWER)

Turns the TV On and Off.

SOURCE

Selects Connected devices.

Opens the Main On-screen Menu.

CH H / I

Selects a Channel. In the Menu screen, moves the Cursor Up (H)/ Down (I).

VOL J / K

Adjusts the Volume. In the Menu screen, moves the Cursor Left (J) / Right (K).

VOL J VOL K

: Volume Down

: Volume Up

Terminals

Ethernet port

For Internet connection using an Ethernet cable with an RJ-45 connector.

Digital Audio Output jack

Digital Audio (S/PDIF) Output to home theaters and other Digital Audio systems.

PC Input jack

VGA cable connection for PC.

Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jack(s) for VIDEO

Composite Video Input (VIDEO) jack is a shared jack with Component Video Input (Y) jack.

Analog Audio (L/R) Input jacks

Connect Analog Audio signals from;

–

HDMI-DVI / Analog Audio (L/R) jacks signal

–

Component Video / Analog Audio (L/R) jacks signal

–

Composite Video / Analog Audio (L/R) jacks signal

–

PC Connection / Analog Audio (L/R) jacks signal with Stereo mini

3.5mm plug Audio cable on PC

HDMI Input jack(s)

Digital Audio and Video Input from high definition Digital devices such as DVD / Blu-ray disc players, Cable / Satellite Set-top boxes, PC’s, etc.

* For HDMI 1 only

In addition to normal HDMI and HDMI-DVI functionality, it outputs TV Audio to an HDMI-ARC-compliant device, such as a home theater system.

USB terminal

Data Input from USB Memory Stick only. Do not connect any device to this terminal such as Digital camera, keyboard, mouse, etc.

75 ohm Cable / Antenna connection

Signal Input from an Antenna or Cable / Satellite Set-top boxes.

Headphone Audio Output jack

Headphone 3.5mm stereo jack for personal listening.

Continued on next page.

INININ

OUT

RF cable

antenna

Cable

Set-top Box

RF cable

OUT

RF cable

antenna

HDMI cable

IN OUT

Set-top Box

RF cable

HDMI cable

Set-top Box

INININ

RF cable

OUT

Component (Y/Pb/Pr)

Video cables

Component (Y/Pb/Pr)

Video cables

Component (Y/Pb/Pr)

Video cables

INININ

OUT

Audio (L/R) cables

INININ

OUT

Cable

OUT

RF cable

Audio (L/R) + Video cables

RF cable

Set-top Box

OUT

Audio (L/R) + Video cables

Blu-ray disc/DVD Recorder

OUT

Audio (L/R) + Video cables

OUT

RF cable

15 .English

Connecting Antenna or Cable / Satellite / IPTV Box

Be sure your Antenna or another Device is connected properly before plugging in the AC Power Cord.

If connecting to an Antenna through an RF cable

Any DTV Programs that are Broadcast in your area can be received for free through an Antenna Connection.

If connecting Cable / Satellite / IPTV Set-top box using an RF cable

If the TV is connected to a Cable / Satellite Set-top Box via a Coaxial Connection, set the TV to channel 3/4 or the channel specified by the service provider.

If connecting Cable / Satellite / IPTV Set-top Box using an HDMI cable

If the TV is connected to a Cable / Satellite Set-top Box via an HDMI cable, make sure you select the correct Source by using S SOURCE.

Connecting a Cable / Satellite / IPTV Box, Blu-ray Disc / DVD Recorder via Composite Connectors and Analog Audio

Do Not place your Recorder too close to the Screen because some Recorders can be susceptible to harmful interference from the TV.

Note(s)

●

If you have any question about the DTV’s Antenna, visit www.antennaweb.org for further information.

●

Depending or separators (splitters) for HDTV Signal. The minimum RF bandpass on these Devices is 2,000MHz or 2GHz.

●

For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable from the Antenna Input jack before moving the Unit.

●

If you did use an Antenna to receive Analog TV, it should also work for DTV reception. Outdoor or attic Antennas will be more effective than a Set-top Box or inside Antenna.

●

To Turn On your reception source easily between Antenna and Cable, Install an Antenna selector.

●

If you are not receiving a Signal from your Cable service, contact the Cable provider.

on your Antenna system, you may need different types of combiners (mixers)

Plugging in the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made.

If connecting Cable / Satellite / IPTV Set-top box using Component Video Input

If the TV is connected to a cable / satellite set-top box via Component Video Input, make by using S SOURCE.

sure you select the correct Component Video Source

Caution(s)

●

Do Not connect of this Unit (120V AC).

●

Connecting the AC Power Cord to a Power Supply outside of this range may result in Unit failure, degradation or electrical shock.

Note(s)

●

Each time you plug in the AC Power Cord, no operations will be performed for several seconds. This is not a malfunction.

the AC Power Cord to an AC Power Supply outside the indicated voltage

Continued on next page.

HD game console

Blu-ray Disc/DVD Player

Set-top Box

OUTIN

HDMI cable

Cable Receiver or

Satellite Set-top Box with

the DVI Output jack

OUT

HDMI-DVI

conversion cable

OUT

Audio (L/R) cables

16 .English

No supplied cables are used with these connections:

●

Please purchase the Necessary Cables at your local store.

Before you connect the AC Power Cord:

Be sure other

Devices are connected properly before plugging in the AC

Power Cord.

Selecting your Connection quality

HDMI - Highest quality

Supports high-definition Digital signals and gives highest picture and sound quality. Video and HDMI for full high-definition Video and to enable EasyLink(HDMI CEC).

Note(s)

●

Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of Digital DVDs.

●

The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output of TV Audio to an HDMI-ARC-compliant Device.

Audio signals are combined in one cable. You must use

Rights Management that protects high definition content in Blu-ray discs or

Connecting your Devices

HDMI Digital Connection

HDMI Connection offers the Highest Picture quality. HDMI (High-Definition Multimedia Interface) transports high definition Digital Video and multi-channel Digital Audio through a single cable.

HDMI-DVI Connection

This Unit can be connected to your Device that has a DVI Terminal. Use an HDMI-DVI Audio Cable for Analog Audio signal as well.

Conversion Cable for this Connection and it requires

Component (Y Pb Pr) - High quality

Supports high-definition Analog signals but gives lower picture quality than HDMI. Component (Y/Pb/Pr) Video cables combine red / green / blue Video cables with

red / white Audio (L/R) Cables. Match the cable colors

when you connect to the TV.

Composite - Basic quality

For Analog Connections. Composite Video / Audio Analog cable usually combine a yellow this Unit, yellow cable must be connected to Y (green) jack on the Component Video Input jacks.

Video Cable with red / white Audio (L/R) Cables. With

Note(s)

●

Use an HDMI is recommended for the Better compatibility.

For HDMI Connection

●

The Unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of Video signals, 32kHz /

44.1kHz and 48kHz of Audio signals.

●

This Unit accepts 2 channel Audio signal (LPCM) only.

●

This Unit accepts only signals in compliance with EIA861.

For HDMI-DVI Connection

●

The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.

●

HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals are Output as Analog (L/R) Audio.

●

DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable

Continued on next page.

OUT

HDMI cableHDMI cableHDMI cable

HDMI 1 IN only

HDMI 1 IN onlyHDMI 1 IN only

Digital home theater

amplifier that supports

HDMI-ARC

Blu-ray Disc/DVD

Recorder

Set-top Box

OUT

Component (Y/Pb/Pr)

Video cables

OUT

Audio (L/R) cables

Audio (L/R) + Video cables

DVD Player

OUT

LAN

Internet

Network provisioning

equipment

Network provisioning

equipment

Network provisioning

equipment

Ethernet cable

17 .English

HDMI-ARC Connection

HDMI-ARC allows you to use EasyLink to output TV Audio directly to a connected Audio device,

without the need for an additional Digital Audio

cable.

Note(s)

●

The HDMI 1 Digital Audio to an HDMI home theater system.

●

Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI-ARC connectors.

connector is HDMI Audio Return Channel (ARC) compliant. Use it to output

Component Analog Video Connection

Component Analog Video Connection offers Better Picture quality for Video Devices connected to the Unit.

If you connect to the Unit’s Component Video (Y/Pb/Pr) Input jacks, connect Analog Audio Cables to the Analog Audio (L/R) Input jacks.

Composite Analog Video Connection

Composite Analog Video Connection offers Standard Picture quality for Video Devices connected to the Unit.

If you connect to the Unit’s Component/Composite Video (Y/VIDEO) Input jack (green), connect Audio Cables to the Audio (L/R) Input jacks. When the Audio is monaural, then only connect to the Audio L Input jack.

Note(s)

●

With this Unit, yellow cable must be connected to Y (green) jack on the Component Video Input jacks.

●

Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks connected, it may cause an unstable picture.

Connecting the TV to the Internet using an Ethernet cable

Note(s)

●

The Unit accepts

480i, 480p, 720p, 1080i and 1080p of Video signals for this Connection.

Note(s)

●

Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment.

●

After connecting an Ethernet cable, set up necessary network settings. Network

p. 40

●

Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging the unit.

●

If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router.

●

If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, then add a hub.

●

For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

●

Do not connect your PC directly to the Ethernet port of this unit.

Continued on next page.

WLAN

LAN

Network provisioning

equipment

Ethernet cable

Broadband router

Internet

Digital Home

Theater Amplifier

OUT

Digital Audio Coaxial cable

INININ

OUT

HDMI cable

OUT

HDMI-DVI

conversion cable

OUT

Stereo Mini 3.5 mm Plug Audio cable

OUT

VGA cable

Stereo Mini 3.5 mm Plug Audio cable

18 .English

Connecting the TV to the Internet using a Wireless LAN

Note(s)

●

After you make the wireless connection, set up the necessary network settings.

Network L p. 40

●

Use a Wireless LAN Access Point (AP) (e.g. Broadband wireless router) which supports IEEE 802.11 b/g/n. (n is recommended for stable operation of the wireless network.)

●

This unit does not support Ad-hoc mode.

●

Other radio devices or obstacles may cause interference to the wireless network connection.

PC Connection

HDMI Connection

This Unit can be connected to your PC that has an HDMI terminal. Use an HDMI cable for this Digital Connection.

HDMI-DVI Connection

This Unit can be connected to your PC that has a DVI Terminal. Use an HDMI-DVI Conversion Cable for this Video Digital Connection and it requires Stereo mini 3.5mm Plug Audio Cable for Analog Audio signal as well.

Digital Audio Output Connection

If you connect this Unit to an External Digital Audio Device, you can enjoy multi-channel Audio like 5.1ch Digital Broadcasting sound.

Use a Digital Audio Devices.

Audio Coaxial Cable to connect the Unit to External Digital

VGA Connection

This unit is PC, you can use this Unit as a PC monitor. Use a VGA cable for this Video Connection and it requires a Stereo mini

3.5mm Plug Audio Cable for Analog Audio signal as well.

equipped with a PC Input jack. If you connect this Unit to your

Continued on next page.

The following Video signals can be displayed:

Format Resolution Refresh rate

VGA 640 x 480

SVGA 800 x 600

XGA 1,024 x 768

WXGA

FHD*

1,280 x 768

1,360 x 768

1,920 x 1,080

60Hz

Other formats or non-standard signals will not be displayed correctly.

* 65PFL4909 / 55PFL4909 / 55PFL4609 / 50PFL4909 / 49PFL4909 /

49PFL4609 / 43PFL4909 / 43PFL4609 / 40PFL4909 / 40PFL4609 only.

Note(s)

●

Please purchase the VGA cable or HDMI-DVI Conversion Cable that has a ferrite core.

●

The following operations may reduce noise.

–

Attach a ferrite core to the AC Power Cord of your PC.

–

the AC

Unplug

●

Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the Better compatibility.

●

The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.

●

HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals are Output as Analog (L/R) Audio.

●

DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

Power Cord and use the built-in battery of your Portable / Laptop PC.

19 .English

USB Memory Stick

This unit offers easy playback of Picture (JPEG), Music (MP3) and Video files.

Insert the USB Memory Stick into the USB terminal shown below.

USB L p. 26

Note(s)

●

The Unit recognizes only a USB Memory Stick.

●

Do Not use a USB hub or an extension cable to connect an External hard disk drive to the Unit. (Not Supported.)

●

A USB Memory Stick is always inserted to this Unit directly.

●

A USB Memory Stick is Not Supplied with this Unit.

●

We Do Not guarantee that All USB Memory Sticks can be supported by this Unit.

●

Be sure to keep a backup copy of the original files on your Device before you play them back on this Unit. We have no responsibilities for damage or loss of your stored data.

●

protect your

To tab in the protect position.

●

When you are ready to remove a USB Memory Stick, set the Unit to go into Standby mode to avoid any damage to your data and the Unit.

●

A USB Memory Stick that requires its own driver or the Device with a special system such as fingerprint recognition are Not Supported.

●

This unit is not allowed to use the USB Memory Stick which requires an External Power Supply (500mA or more).

USB Memory Stick files from being erased place the write protect sliding

Continued on next page.

These Operations are accessible by Remote Control.

Select

box or satellite TV receiver.

To set up a TV signal from a cable TV

Select

wall jack or a standard TV antenna.

To set up a TV signal from a cable TV

Skip

Cable

Antenna

OK button to proceed.

made your selection, press the

remote control. Once you have

Cable, using up/down key of the

Now select either Antenna or

of your TV labeled "ANTENNA IN".

signal into the jack on the back

attached your antenna or cable

Make sure that you have

0 0

Stop

the Auto Programming complete message.

to find and program. Please wait until you see

complete. Digital channels will take longer than Analog

Auto programming may take more than 20 minutes to

Analog channels found:

Digital channels found:

System searching. Please wait…

Skip

Wired

Wireless

Select your connection type.

your Internet home network.

This TV can be connected to

StartCancel

differ. Select the side that is most pleasing to you with the Left/ Right buttons.

preference. You will see a series of test pictures where the right side and left side

Settings assistant will allow you to customize your picture settings to your personal

The energy consumption in the “Standard” setting is Energy Star certified.

Picture BPicture ACancel

Which side of the picture do you prefer?

Some may also be accessible by the Main Unit's Control Panel.

Initial Setup

This section will guide you through the Unit’s Initial setting which includes selecting a Language for your On-screen Menu, country, location and Autoprogram, which Automatically scans and memorizes viewable channels. You can also set the network connection in this setting.

Before you begin:

Make sure the Unit is connected to an Antenna or Cable.

After making All the Necessary Connections, press B to Turn On the Unit.

●

may take

●

Initial setup menu appears Automatically after the Unit is Turned On.

Use H I to select the on-screen language, country, TV placement, location on the right side of the TV screen, then press OK.

●

You must set Home in location setting. Otherwise, Picture and Sound settings you adjusted will not be memorized after the Unit goes into Standby mode.

Use H I to select the signal type.

●

If the TV is connected to a Cable or Satellite Set-top box, select the 2nd one and skip to step 5.

a few moments to Turn On the Unit for the first time.

After the channel installation is completed, Network setup screen

will appear. Use H I

to select Wireless

or Wired, then press OK.

20 .English

Use H I to select Antenna for TV channels or Cable for CATV channels, then press OK.

Wireless

Wired

●

If you have a router with WPS function, select Wireless and use

If you have a Wireless router, select Wireless to connect to the Internet.

If you connect with an Ethernet cable, select Wired to connect to the Internet.

H I to select Easy Connect, then press OK.

Follow the on-screen instructions to complete the installation.

●

When you select On in the selection screen for Auto software update. A message

will appear if there is the latest software on the

network server.

Use J K to select Start, then press OK to begin Settings assistant.

Press J or K 5 times to select the side of the pictures that is the most pleasing to you, then press OK.

–

When Antenna is selected, the TV detects Antenna signals. It searches for DTV

–

When Cable is selected, the TV detects signals supplied by cable. It searches for DTV, Analog TV and Cable channels available in your area.

●

Autoprogram will begin.

and Analog TV channels available in your area.

Continued on next page.

Energy savingPersonal

Select the energy efficiency level you prefer.

Sound CSound BSound A

Select your preferred sound setting

StoreCancel

Store your preferences.

Use J K to select your

preferred energy efficiency level, then press

OK.

Use J K to select your preferred sound setting, then press OK.

Press OK to finish Settings assistant.

●

Network updates will appear after Connection test succeeds. Use J K to select Yes, then press OK.

●

When the initial setup is completed, the lowest memorized channel with the

confirmation message will be displayed on the TV

screen.

Note(s)

●

If you are not receiving a signal from your Cable service, contact the Cable provider.

●

If you press B during autoprogram, this setup of TV channels will be cancelled.

●

Initial Autoprogram

The When you change the connection (Antenna / Cable), select Autoprogram again. L

p. 37

function can be executed for either Antenna or Cable only once.

21 .English

After an Initial Setup is completed...

●

If you want to scan the channels Automatically again.

Autoprogram L

●

You can add the desired channels not memorized by Autoprogram through antenna connection.

Weak channel installation L p. 37

●

If you want to change to another Language.

Language L p. 36

●

If you want to change the country setting.

Country L p. 50

●

If you want to change the Location setting.

Location L p. 38

●

If you want to change the network setting.

Network L p. 40

●

If you want to restore the picture and sound setting.

Settings assistant L p. 30

p. 37

Remote Control

Digital TV Operation

Cable / NTSC (Analog) TV Operation

22 .English

4 Use your TV

Switching on your TV and putting it in Standby mode

To Turn the TV On from Standby or Off to Standby

●

Press B on the Side panel or the Remote Control.

Note(s)

●

Energy Consumption contributes to air and water pollution. When the AC Power Cord is plugged in, your TV consumes energy with a very low standby Power Consumption.

Switching Channels

Adjusting Volume

To decrease or increase Volume

●

Press VOL J / K on the Control.

VOL J (–) : Volume Down VOL K (+) : Volume Up

To mute or unmute sound

●

Press V on the Remote Control to mute the sound.

●

Press V again or VOL + / – to recover the original sound.

Side panel or press VOL + / – on the Remote

To select Channels by using CH H / I or CH + / –

●

Press CH H (Up) / I （

Down) on the side panel or press CH + / – on

the Remote Control.

To select Channels by using the NUMBER buttons

●

For Digital channels, press a number followed by a dot “•” and the corresponding sub channel number.

–

When selecting Digital channel 11.1 Be sure to press • before entering the subchannel number.

–

When selecting Cable or Analog channel 11

Press PREV.CH to return to the previously viewed channel.

Note(s)

●

To select the non-memorized channels, use the NUMBER buttons.

●

Channel not available or No Signal will appear on the TV screen after the subchannel broadcast is over.

●

Audio Only

message will appear on the TV screen, when you receive only sound signal.

Continued on next page.

11.1

DTV / Analog TV channel

e.g.)

Component

Video

HDMI3

HDMI2

HDMI1

Video

HDMI3

HDMI2

HDMI1

SetupAdd new devicesNet TV

Browse PCBrowse USBWatch TV

23 .English

Watching Channels from an External Device

Switching Each Input Mode can easily switch with the Remote Control between TV (DTV or Analog TV) and External Devices when they are connected to the Unit.

Turn On the Set-top Box or the Connected Device.

●

picture from

The appear Automatically on the TV screen.

If the picture does not appear

① Press S SOURCE Repeatedly to select the Set-top Box or the

connected device and wait a few seconds till the Picture appears.

●

Pressing H reverses the direction of the Input modes.

② Use the Remote Control for the Set-top Box or the Connected

Device to select Channels to view.

the Set-top Box or the Connected Device might

Note(s)

●

After selecting Add new devices, follow the on-screen instructions to select the correct device and connector.

Lock or unlock your device from the Home menu

This section describes how to lock or unlock specified device.

Press Q (MENU) on the remote control.

Use H I J K to select a device to lock or unlock.

Press U OPTIONS on the remote control.

Use H I to select Device lock or Device unlock, then press OK.

●

If device lock is unlocked, Device lock lock is locked, Device unlock will be displayed and

will be displayed. If device

will be

displayed at the top right of the device icons.

Enter your PIN. Change PIN

●

Once you have set PIN, PIN input menu does not appear after the

p. 36

unit is Turned on.

Enable or disable RC key forwarding from the Home menu

This section describes how to enable or disable RC key forwarding for a particular device.

Press Q (MENU) on the remote control.

Access the Home menu 1

Press Q (MENU).

Guide to Home menu

a Watch TV : Switches back to the TV source if another

source is selected.

b Net TV : Accesses Net TV menus. c Add new devices : Adds new devices to the Home menu. d Browse USB : Accesses USB menus. e Browse PC : Accesses DLNA menus. f Setup : Accesses menus that allow you to change

picture, sound and other TV settings.

Use H I J K to select a device to enable or disable RC key forwarding.

Press U OPTIONS

Use H

I to select Enable RC key forwarding or Disable RC key

on the remote control.

forwarding, then press OK.

●

If RC key forwarding is set to off, Enable RC key forwarding will be displayed. If RC key forwarding is set to on, Disable RC key forwarding will be displayed and

will be displayed at the top

left of the device icons.

Note(s)

●

This function is cables and assigned to an HDMI port (HDMI 1 to HDMI 3) with Add new devices in the Home menu.

available only when your devices are connected to this unit through HDMI

Continued on next page.

24 .English

Using auto mode 1

Press U OPTIONS and select Auto picture or Auto sound to set your TV to a predefined picture and sound setting.

Use H I to select one of the following settings:

Auto picture Auto sound Description

Personal

Standard

Vivid

Sports

Movie

Game

Energy saving

Internet video

- Optimized for PCs and game consoles

Music

News

The customized settings you defined using the Picture and Sound menu

For normal TV viewing

Enhanced picture contrast, sharpness and sound for viewing in a well-lit room

Brilliant picture settings and clear sound for high action

Deep picture and powerful sound settings for a cinematic experience

Eco TV settings for low power consumption

Optimized for low bitrate Internet video

Optimized for music playback

Set the anchor's voice at a comfortable volume

Create and use lists of favorite channels

You can create lists of your preferred TV channels so that you can find those channels easily.

Select a list of favorite channels

Press U OPTIONS and select Favorites.

●

Your lists of favorite channels are displayed.

Use H I to select the desired list, then press OK.

Create or edit a list of favorite channels

Press U OPTIONS and select Favorites.

Use H I

Press

●

Use H I to select the desired channel, then press OK to add or remove on the list of favorite channels.

●

Press Q (MENU) to exit.

to select the desired list, then press OK.

U OPTIONS to enter edit mode.

A list of channels is shown.

G indicates that the channel is added. E indicates that the channel is removed.

Switch to one of the channels on a list

Press OK to display the last list that you selected.

1 2

Use H I

●

Note(s)

●

Press CH + / that are not on a list.

to select a channel, then press OK.

The TV switches to that channel.

− to select channels on a list or press the NUMBER buttons to select channels

Continued on next page.

Wide screenUnscaled or

Full*(1080i/p only)

4:3Automatic

Wide screen Movie expand 16:9 Movie expand 14:9

4:3Super zoomAutomatic

UnscaledWide screen4:3

25 .English

Changing Picture Format

Display Modes can be Selected when your TV receives a 16:9 or 4:3 Video Signal.

Three types of Display Modes can be Selected for a PC Input Signal. Press R FORMAT Repeatedly to Switch the TV Aspect Ratio.

For 16:9 Video signal

Other than DTV and HDMI connected devices,

Automatic

4:3

Wide screen

Unscaled or Full*

(1080i/p only)

enlarges the picture to Best fit the screen. DTV and HDMI connected

devices display the picture at its original size. The subtitles may remain visible.

Displays a 16:9 picture at a 4:3 size; the picture is shortened horizontally. Sidebars appear on both edges of the screen.

Displays a 16:9 picture that is stretched horizontally and vertically.

Displays a 16:9 picture at its original size.

For 4:3 Video signal

Automatic

Super zoom

4:3

Movie expand 14:9

Movie expand 16:9

Wide screen

For PC Input signal

Other than DTV and HDMI connected devices, enlarges the picture to Best fit the screen. DTV and HDMI connected devices display the picture at its original size. The subtitles may remain visible.

Displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically and its left and right edges are enlarged. This crops out the top and bottom of the picture.

Displays a 4:3 picture at its original size. Sidebars appear on both edges of the screen.

Displays a 4:3 picture at a 14:9 size; the picture is stretched horizontally and vertically. This

crops out the top and bottom of the picture.

Sidebars appear on both edges of the screen.

Displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically. This crops out the top and bottom of the picture.

Displays a picture that is stretched out of proportion to fill the screen.

* This part differs depending on the product you have.

●

"Unscaled" for 65PFL4909, 55PFL4909, 55PFL4609, 50PFL4909, 49PFL4909, 49PFL4609, 43PFL4909, 43PFL4609, 40PFL4909, 40PFL4609.

●

"Full" for 32PFL4909, 32PFL4609, 28PFL4909, 28PFL4609.

●

This unit can also be connected to your PC that has a DVI Terminal. Use an HDMI-DVI

Conversion Cable for this Video Connection and it requires Stereo Mini 3.5mm Plug Audio Cable for Analog Audio signal as well.

●

Refer to 16:9 Video Signal on this page if the PC has HDMI Output.

4:3

Wide screen

Unscaled

Displays a proportionately stretched picture. Sidebars appear on both edges of the screen.

Displays a picture that is stretched out of proportion to fill the screen.

Displays a picture in its original size.

Continued on next page.

e f g

11.1 KABC

None

English

Stereo

Wide screen

Sleep timer

Rating

CC presence

Audio language

Sound mode

Picture format

Resolution

A Day of Memories

1080i

avi jpg mp3

Image5.jpg

Image4.jpg

Image3.jpg

Image2.jpg

Image1.jpg

Video

Music

Picture

26 .English

TV Screen information

You can display the currently selected channel or other information such as the aspect ratio on the TV screen.

In the Digital off-the-air channel such as program title and program guides are displayed.

a b

c d

●

While the program guide is displayed, the Closed Caption function is interrupted.

●

The information display will automatically disappear in 5 seconds.

mode, the detailed broadcasting information for the current

Press T INFO.

Broadcast station Channel number / Input mode

Switching Channels L p. 22 Watching Channels from an External Device L p. 23

Program title (for DTV only) Program’s image Aspect Ratio

Changing Picture Format L p. 25

Audio Language (DTV) / Audio mode (Analog TV)

Sound L p. 32

CC (not available if Closed Caption is set to Off) Caption settings L p. 33

Child lock rating

Child and Ratings Lock L p.

Remaining time on Sleep timer

Sleep timer L

p. 34

Press T INFO to hide the information.

Note(s)

USB

Your TV is fitted with a USB connection that enables you to view photos, listen to music or watch video files stored on a USB Memory Stick.

Connect the USB

your TV.

Press Q (MENU) and use H I J K to select Browse USB, then press OK.

Use H I to select the Picture, Music or Video, then press OK.

●

files recorded

The

●

Press U OPTIONS to display the optional menu, then press OK to switch between List and Thumbnails.

Picture (JPEG)

Upper limit 16Mpixel

Music (MP3)

Sampling frequency 32 kHz, 44.1 kHz or 48 kHz

Constant bit rate 32 kbps - 320 kbps

Video

Maximum size of a

video

Extension

Video codec

Audio codec

Dolby Digital YES YES YES NO

MPEG1 audio layer3

(MP3)

MPEG1 audio layer2 YES NO YES NO

LPCM YES NO NO NO

AAC-LC NO NO NO YES

Note(s)

●

Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.

●

Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.

●

Up to 255 English characters can be recognized.

●

This unit does not support MTP(Media Transfer Protocol).

●

This unit supports FAT16 and FAT32 file systems.

●

If the file is not supported, an error message appears.

●

When the USB Memory Stick is not recognized, try reconnecting it again.

●

cannot be

We accept any liability for damage or loss of stored data.

●

A file name exceeding 256 characters or contains a dot character is Not Supported on this TV.

●

Progressive JPEG files are Not Supported.

held responsible if your USB Memory Stick is Not Supported, nor will we

Memory Stick to the USB terminal on the side of

under the following specifications are required.

1920 x 1080

.mpg, .mpeg

MPEG1,

MPEG2

.vob .avi .mp4

MPEG2

MPEG4 SP,

MPEG4 ASP

H.264,

MPEG4

YES NO YES NO

Continued on next page.

avi

jpg

mp3

11/11/2011 11:11 AM 800×600 pixels

Image4.jpg

Image8.jpg

Image7.jpg

Image6.jpg

Image5.jpg

Image4.jpg

Image3.jpg

Image2.jpg

Image1.jpg

avi jpg

mp3

00:05:28

Year:

Duration:

Album:

Artist:

Title:

Track8.mp3

Track7.mp3

Track6.mp3

Track5.mp3

Track4.mp3

Track3.mp3

Track2.mp3

Track1.mp3

27 .English

Picture (JPEG)

Use H I to select a file or a folder.

Press OK or K F to start a Slide show of the files.

●

Press OK or K F to pause the Slide show.

●

The F icon appears.

●

Press JJ or KK to move between images.

●

Press Y BACK or C to stop the Slide show.

●

Press U OPTIONS to display the optional menu, then use H I to select the desired item.

Slide time *1

Transitions *1

Auto

picture

Rotate *2

Zoom *2

Short

Medium

Long

None

Dissolve

Wipe right

Wipe left

Wipe up

Wipe down

Box in

Box out

Selects the picture mode according to your preference. (Standard, Vivid, Sports, Movie, Game, Energy saving and Internet video)

180

270

Switches to the next image in 5 seconds.

Switches to the next image in 10 seconds.

Switches to the next image in 15 seconds.

No effect when switching images.

Overlaps the next image on the current image.

Pushes the current image out from left.

Pushes the current image out from right.

Pushes the current image out from bottom.

Pushes the current image out from top.

The next image comes to the center from the outside.

The next image goes to the outside from the center.

Displays an image in its original direction.

Rotates an image 90 degrees clockwise.

Rotates an image 180 degrees clockwise.

Rotates an image 270 degrees clockwise.

Displays an image in its original size.

Magnifies a current image by 2 times.

Magnifies a current image by 4 times.

Music (MP3)

Use H I to select a file or a folder.

Press OK or K F to play the selected files.

●

Press OK or K F to pause, then press OK or K F again to resume.

●

Press KK to skip to the next file.

●

Press JJ to return to the beginning of the file currently playing.

●

Press C to stop playback.

●

Press U OPTIONS to display the optional menu, then use H I to select the desired item.

Off

Repeat

Off

Shuffle

Off

Speakers

EasyLink

Auto sound

Note(s)

●

TV Speakers will be displayed only when Master EasyLink is set to On. EasyLink(HDMI CEC) L p. 39

Selects the sound mode according to your preference. (Standard, Vivid, Sports, Movie, Music and News

Sets repeat playback to Off.

Sets repeat playback for all MP3 files in the current folder.

Sets shuffle playback to Off.

Sets shuffle playback for all MP3 files in the current folder.

The Sound will not be output from the unit's speakers.

The Sound will be output from the unit's speakers.

You can control Audio Output from your connected EasyLink Compliant Devices with VOL + / − by using this unit's Remote control.

)

*1 You can set Slide time and Transitions when images are in Slide

*2 You can set Rotate

show.

and Zoom when Slide show is in Pause mode.

Continued on next page.

Video

avi

jpg mp3

Duration:

Date:

Director:

Title:

Movie8.avi

Movie7.avi

Movie6.avi

Movie5.avi

Movie4.avi

Movie3.avi

Movie2.avi

Movie1.avi

Use H I to select a file or a folder.

Press OK or K F to play the selected files.

●

Press OK or K F to pause, then press OK or K F again to resume.

●

Press KK to fast-forward search.

●

Press JJ to fast-backward search.

●

Press C to stop playback.

Press K F to resume from the point at which playback was stopped. Press OK to play from the beginning of the file.

●

Press U OPTIONS to display the optional menu, then use H I to select the desired item.

The Sound will not be output from the unit's speakers.

The Sound will be output from the unit's speakers.

You can control Audio Output from your connected EasyLink Compliant Devices with VOL + / −

by using this unit's

Remote control.

Vivid, Sports, Movie, Game, Energy saving

speakers

Auto

picture

Auto sound

Off

Speakers

EasyLink

Selects the picture mode according to your preference. (Standard, and Internet video)

Selects the sound mode according to your preference. (Standard, Vivid, Sports, Movie, Music and News)

28 .English

Note(s)

●

The Resume information will be kept even when the unit is Turned Off.

●

If you play another file while the previously viewed file is being resumed, the Resume information of the previously viewed file will be Deleted.

●

The file or the folder in Resume Stop mode will be highlighted in gray on List or Thumbnails.

●

TV Speakers will be displayed only when Master EasyLink is set to On. EasyLink(HDMI CEC) L p. 39

5 Making more use with your TV

SetupAdd new devicesNet TV

Browse PCBrowse USBWatch TV

Start now

Software

Installation

Features

Sound

Picture

Settings assistant

This section describes the overview of the Setup menu displayed when you press Q (MENU) and use H I J K to select Setup. The Setup menu consists of the function setting items below.

Press Q (MENU) to display the Home menu.

Use H I J K to select Setup, then press OK.

Use H I to select use H I J K to determine the setting.

the desired Menu and an item, then press OK or

29 .English

Settings assistant

Interactive wizard which guides you to get the best picture and sound settings.

Picture

Adjusting the Picture Mode or customize the Picture quality as your preference.

Sound

Adjusting the Sound Mode, Equalizer and some other Sound functions.

Features

Adjusting the Closed Caption, Parental Guide and some other useful functions.

L p. 30

L p. 32

L p. 33

Installation

You can choose language, scan the channels available in your area or make the Network settings.

Software

You can check the current software version, update the software or deactivate the setting for Netflix and VUDU.

When the Setting is completed, press Q (MENU) or Y BACK to exit.

L p. 36

L p. 44

Continued on next page.

Start now

Software

Installation

Features

Sound

Picture

Settings assistant

Color alignment

Personal

Advanced settings

Sharpness

Tint

Color

Brightness

Contrast

Backlight

Auto picture

Software

Installation

Features

Sound

Picture

Settings assistant

30 .English

Settings assistant

Before you begin:

You must set Home in Location. L p. 38

Otherwise, personalized Picture and Sound settings will not be Memorized after the unit goes into Standby mode.

Press Q (MENU) and use H I J K to select Setup then press OK.

Use H I to select Settings assistant, then press OK.

Press OK to begin Settings assistant.

3 4

Follow steps 8 to 11 in Initial Setup L p. 20

Picture

Before you begin:

You must set Home in Location. L p. 38

Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.

Press Q (MENU) and use H I J K OK.

Use H I to select Picture, then press OK.

Use H I J K to select the item you want to adjust, then press OK.

●

The following picture settings can be configured. Depending on the format of the picture Source, some picture settings are not available.

to select the desired setting, then press OK (Personal, Standard, Vivid, Sports, Movie, Game,

Auto picture

Backlight

Contrast

Brightness

Color

Tint

Sharpness

Advanced settings

Picture format

Energy saving and Internet video)

When

you adjust

picture will be set automatically.

J Cursor Cursor K

to Reduce Power Consumption and Brightness

to Decrease Contrast to Increase Contrast

to Decrease Brightness to Increase Brightness

to Decrease Color Intensity

to Add Red to Add Green

to Soften to Sharpen

to select the desired Setting, then press OK (Color alignment, Noise reduction, Light

sensor*1, Black stretch, Dynamic contrast, Gamma, Perfect Motion Rate (or 120 PMR)*2, MPEG artifact reduction, Color enhancement, Custom color management and Film mode)

Automatic

Super zoom

4:3

Movie expand 14:9

Movie expand 16:9

Wide screen

Unscaled

to select Setup

the following settings, Personal

to Increase Power Consumption and Brightness

to Increase Color Intensity

Changing Picture Format L p.

Continued on next page.

then press

Off

Maximum

Medium

Auto

Mode

Gamma

Dynamic contrast

Black stretch

Light sensor

Noise reduction

Color alignment

Advanced settings

Sharpness

Tint

Color

Brightness

Contrast

Backlight

Auto picture

MPEG artifact reduction

Perfect Motion Rate

31 .English

to Turn Off image

Mode selection

HDTV

enhancement features which makes the

TV to

act purely as a monitor

to enable image enhancement features to improve picture quality

Auto adjustment

to adjust the Horizontal / Vertical position, Clock and Phase of the PC screen automatically

J Cursor Cursor K

Clock

Phase

Horizontal

position

Vertical position

to Decrease setting value

to move PC screen left

to move PC screen down

to Increase setting value

to move PC screen right

to move PC screen up

You can set a Particular Picture Quality using Advanced settings.

Gamma

Perfect

Motion Rate

(or 120 PMR)*2

MPEG

artifact

reduction

Color

enhancement

Custom

color

management

Film mode

J Cursor Cursor K

to adjust the gamma encoding of images

Off

to set Perfect Motion Rate (or 120 PMR)*2 to Off

to make the video appear smooth

to select the desired setting, then press OK (Off, Minimum, Medium and Maximum)

Off

to set color enhancement to Off

to make colors more vivid and bright

to select the desired setting, then press OK (Red, Yellow, Green, Cyan, Blue and Magenta)

J Cursor Cursor K

to rotate only selected color tint in counterclockwise direction

to increase color with only selected color

to increase brightness with only selected color

Tint

Saturation

Brightness

Off

Auto

to rotate only selected color tint in clockwise direction

to decrease color with only selected color

to decrease brightness with only selected color

to set film mode to Off

to optimize the picture recorded by the original film

Color

alignment

Noise

reduction

Light

sensor *1

Black

stretch

Dynamic

contrast

to set the color temperature to Personal,

Mode

Cool, Normal and Warm.

When you adjust the following settings, Personal will be set automatically.

J Cursor Cursor K

Red gain

Green gain

Blue gain

Red offset

Green

offset

Blue offset

to Decrease Red Contrast

to Decrease Green Contrast

to Decrease Blue Contrast

to Decrease Red Brightness

to Decrease Green Brightness

to Decrease Blue Brightness

to select the desired setting, then press OK (Off, Minimum, Medium, Maximum and Auto)

Off

to select the desired setting, then press OK (Off, Minimum, Medium and Maximum)

to set Light sensor to Off

to adjust backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room

to Increase Red Contrast

to Increase Green Contrast

to Increase Blue Contrast

to Increase Red Brightness

to Increase Green Brightness

to Increase Blue Brightness

Note(s)

●

Mode selection is available only if

–

the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.

–

the connected HDMI device is outputting a video signal.

●

backlight for

Adjusts in accordance with lighting condition in the room when Light sensor*1 is set to On. Please ensure the room lighting is stable and the light sensor is not blocked.

the best picture quality by dynamically adjusting the backlight intensity

*1 Not available for 32PFL4909, 32PFL4609, 28PFL4909, 28PFL4609.

*2 For 55PFL4909, 55PFL4609, 50PFL4909, 49PFL4909, 49PFL4609,

43PFL4909, 43PFL4609, 40PFL4909, 40PFL4609, 32PFL4909, 32PFL4609, 28PFL4909

and 28PFL4609, 120 PMR will be displayed

instead of Perfect Motion Rate.

Continued on next page.

Sound

Software

Installation

Features

Sound

Picture

Settings assistant

PCM

Off

Start now

Personal

Digital output format

Headphone volume

TV speakers

Auto volume leveling

Balance

Equalizer

Auto sound

OffDTS TruSurround

Digital TV Operation

Cable / NTSC (Analog) TV Operation

32 .English

Before you begin:

You must set Home in Location. L p. 38

Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.

Press Q (MENU) and use H I J K OK.

Use H I to select Sound, then press OK.

Use H I J K to select the item you want to adjust, then press OK.

The following sound settings can be configured. Depending on the format of the broadcasting, some sound settings are not available.

to select the desired Setting, then press OK. (Personal, Standard, Vivid, Sports, Movie, Music

Auto sound

Adjust the tonal quality for each frequency.

Equalizer

Adjust the speakers to suit your listening preference.

Balance

and News) When you adjust the following settings (Equalizer, DTS leveling), Personal sound will be set automatically.

J Cursor Cursor K

to select the specific frequency using H I, and use J K to Adjust the Level, then press OK.

J Cursor Cursor K

Adjusts the balance of the Right and Left speakers to Best suit your listening position.

to select Setup

TruSurround

then press

and Auto volume

When you set to Main in Alternate audio above, you can select Mono or Stereo if the Analog broadcasting is sending the MTS (Multichannel television sound).

Mono/Stereo

This selects Sound modes for more Spatial or Surround sound reproduction.

DTS TruSurround

This function keeps a constant Loudness differential between the TV Commercials and the Programs.

Auto volume

leveling

You can select the Audio Output from the unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure Master EasyLink

is set to On. L p. 39

TV speakers

Adjust Headphone volume.

Headphone

volume

You can set the Digital Audio output format from SPDIF/ARC.

Digital output

format

Mono

Stereo

Off

Speakers EasyLink

to Decrease or Increase volume

PCM

Bitstream

to Output Mono-audio.

to Output Stereo-audio.

to set DTS TruSurround™ to Off

to set DTS TruSurround™ to On

to Remove the Auto volume

leveling

to Reduce Volume Differences between the TV the Programs

No Output Sound from the Unit’s Speakers

to Output Sound from the Unit’s Speakers

to control Audio Output from your connected EasyLink Compliant Devices with VOL + /

- by using this Unit's remote control.

J Cursor Cursor K

to Output PCM format.

to Output Audio in its native format as Bitstream to connected Audio receiver.

Commercials and

You can select the Audio language while your TV is receiving the Digital broadcasting.

Digital audio

language

You can select Main or SAP while your TV is receiving the Analog broadcasting that has the SAP (Second Audio Program). (It differs depending on the program.)

Alternate audio

to select the language according to your preference. (It differs depending on the program.)

Main

SAP

to output main-audio

to output second-audio program

If a Channel or Input device is too loud or too soft, navigate to that Channel or Input device.

J Cursor Cursor K

Delta volume

Note(s)

●

Alternate audio and Mono/Stereo are not available when you watching TV programs with a cable box or satellite set-top box connected through an HDMI cable or Component / Composite Video cables.

to set a Negative Delta volume level as per your personal preferences

to set a Positive Delta volume level as per your personal preferences

Continued on next page.

Start now

Channel lock

Closed captions

Change PIN

Child lock

Sleep timer

Caption settings

Software

Installation

Features

Sound

Picture

Settings assistant

Reset to default

CS-1

CC-1

Off

Digital caption options

Digital caption service

Caption service

Closed captions

Change PIN

Child lock

Sleep timer

Caption settings

Digital TV Operation

So, you must be Philip. Hi!

So, yo u m us t be P hi li p. H i!

I’m pleased to meet you.

I’m p le as ed t o me et y ou .

So, you must be Philip. Hi!

I’m pleased to meet you.

(Background color and Background opacity)

Background

(Edge color and Edge type)

Edge

(Font style, Font size, Font color and Font opacity)

Font

Picture display

Cable / NTSC (Analog) TV Operation

33 .English

Features

Press Q (MENU) and use H I J K to select Setup then press OK.

Use H I to select Features, then press OK.

Adjust the following items.

Caption settings

Closed Captions displays the Audio portion of the Program as Superimposed Text over the Video.

Use H I to select Caption settings, then press OK

You can choose the Size, Font, Color, Background and other characteristics of the Caption text.

Reset to

default

You can change Closed Captioning font style, size, color and transparency. (Font style, Font size, Font color and Font

Digital caption

options

●

Review your setting choice made above by looking in the upper left corner of the displayed setting box (not All selections show the differences selected).

opacity)

You can change background color and transparency of the displayed caption. (Background color and Background opacity)

You can change edge color and type of the displayed caption text. (Edge color and Edge type)

You can reset the status of Digital caption options.

Off

Closed captions

In addition to the basic Closed Caption, DTV has its own Closed Caption called Digital caption service. Use this menu to change the settings for Digital caption service.

Digital caption

service

CC w/

mute

CS-1 to

CS-6

Closed Caption is not displayed.

Closed Caption is always displayed.

Closed Caption is displayed when the Sound is Off.

Select one of these before changing any other item in

Caption settings menu. Choose CS-1 under normal conditions.

The primary Text Services. The Closed

CC-1 and

T-1

Caption service

●

There are 3 Display modes according to Programs:

Paint-on

Pop-on

Roll-up

CC-3 and

T-3

CC-2,

CC-4, T-2

and T-4

Displays Characters on the TV screen immediately.

Once Characters are Stored in Memory, they are Displayed All at Once.

Displays the Characters Continuously by Scrolling (max. 4 lines).

Captions or Text is Displayed in the same Language as the Program’s Dialog (up to 4 lines of script on the TV Screen).

Serve as the preferred Data Channels. The Closed Text is often a Secondary Language.

Rarely available and Broadcasters use them only in Special conditions, such as when CC-1 and CC-3 or T-1 and T-3 available.

Closed Captions and

Captions or

are Not

Continued on next page.

Start now

Channel lock

Closed captions

Change PIN

Child lock

Sleep timer

Caption settings

Software

Installation

Features

Sound

Picture

Settings assistant

Select

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Channel lock

Change PIN

Child lock

Sleep timer

Caption settings

34 .English

Note(s)

●

Digital caption service

●

Closed Captioning service may not be controlled by this unit’s menu options if you are watching television through an external cable or satellite set-top box. In which case you will need to use the menu options on the external set-top box to control Closed Captioning.

●

The captions do not always use correct spelling and grammar.

●

Not all TV programs and product commercials include Closed Caption information. Refer to your area TV program listings for the TV channels and times of Closed Caption shows. The captioned programs are usually noted in the TV listings with service marks such as CC.

●

Not all captioning services are used by a TV channel during the transmission of a Closed Caption program.

●

Closed Caption will NOT be displayed when you are using an HDMI or a Component (except for 480i) connection.

●

To show the Closed Caption on your TV screen, broadcast signal must contain the Closed Caption data.

●

Not all TV programs and commercials have the Closed Caption or all types of the Closed Caption.

●

Caption's and Text may not exactly match the TV voice.

●

Changing channels may delay the Closed Caption for a few seconds.

●

Adjusting or muting the volume may delay the Closed Caption for a few seconds.

●

Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a malfunction.

●

The caption or text characters will not be displayed while the Home menu or functions display is shown.

●

If a black box appears on the TV screen, this means that the Closed Caption is set to the text mode. To clear the box, select CC-1, CC-2, CC-3 or CC-4.

●

If the unit receives poor quality television signals, the captions may contain errors or there might be no captions at all. Some possible causes of poor quality signals are:

–

Automobile ignition noise

–

Electric motor noise

–

Weak signal reception

–

Multiplex signal reception (ghosts or screen flutter)

–

Data dropout and Pixelation (for DTV only)

●

The unit retains the Closed Caption setting if the power fails.

●

When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a VCR’s video Output channel (ch3 or ch4), the unit may not display the correct caption or text.

●

The EUT setting that satisfies § 79.102 (e) is as follows:

–

Font: Mono-font

–

Character size: Large

that you can switch differs depending on the broadcast description.

Sleep timer

Sleep timer can set the unit to go into Standby mode after an incremental period of time.

Use H I to select Sleep timer, then press OK.

Use K repeatedly to change the amount of time (increases the time by 5 minutes up to 180 minutes).

●

Each press of J

●

Press T remaining time.

●

To cancel the sleep timer, press J K repeatedly until “0” is displayed.

will decrease the time by 5 minutes.

INFO once to call up the display for checking the

Child and Ratings Lock

You can prevent your children from watching certain Programs or certain Channels by locking the TV Controls and by using Ratings.

Use H I

Use the NUMBER buttons to enter the 4-digit numbers for your

PIN code.

●

See the following description for setting each item.

Note(s)

●

When you select the higher rating and set it to G, the lower ratings will be blocked automatically.

●

When you set the All to E all ratings return to E automatically.

●

Region ratings lock will be available when the unit receives a Digital Broadcast using the new rating system.

●

To block any inappropriate programs, set your limits in TV ratings lock, Movie ratings lock and Region ratings lock.

●

For

the United

●

The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.

to select

Child lock

, then press OK.

When you have not set up your PIN code, enter 0, 0, 0, 0. When the PIN code is correct, Child lock menu is displayed.

States, the unit may download the Region Ratings Lock Table, if required.

Continued on next page.

40.1 DTV

40.2 DTV

40.3 DTV

40.4 DTV

Video

HDMI3

HDMI2

HDMI1

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Channel lock

Change PIN

Child lock

Sleep timer

Caption settings

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

None

All

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Channel lock

NC-17

PG-13

All

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Channel lock

Change PIN

Child lock

Sleep timer

Caption settings

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

None

All

Region ratings lock

Canadian French rating

Canadian English rating

Movie ratings lock

TV ratings lock

Channel lock

Fantasy Violence

35 .English

Channel lock

Particular Channels or External Input modes can be invisible in this function.

Use H I to select Channel lock, then press OK.

Use H I to Select the Particular Channels or External Input, then press OK

●

Repeatedly to Switch between Block and View.

G indicates that the Channel or Input Source is Locked (Block). E

indicates that the Channel or Input Source is Not Locked

(View).

Setting TV and movie ratings

Movie ratings lock is the rating system created by MPAA. TV ratings lock has controlled access to individual programs based on their age ratings and content rating.

Use H I to select TV ratings lock or Movie ratings lock, then press OK.

Use H I to select the Desired Rating, then press OK Repeatedly to Switch between Block and View.

●

G indicates that the Rating is Locked (Block).

●

F indicates that the Sub Rating is Locked (Block).

●

E indicates that the Rating is Not Locked (View).

TV ratings lock

US Movie

ratings

NR None

–

G TV-G

PG TV-PG

PG-13

–

NC-17

X TV-MA

US TV ratings

All

All Ratings Locked including No Rating

No Rating

TV-Y

TV-Y7

Appropriate for All Children

Appropriate for All Children 7 and Older

General Audience

Parental Guidance Suggested

– Unsuitable for children under 13

TV-14

–

Unsuitable for children under 14

Restricted under 17 Requires Accompanying Parent or Adult Guardian

– No One under 17 Admitted

Mature Audience Only

Description

To set the Sub ratings

For TV ratings lock, you can further set the Sub ratings to Block Specific Elements of programming.

To set the Sub ratings, follow the step below.

Use H I J K to select the Desired Rating, then press OK Repeatedly to switch between G and E.

US TV ratings Sub rating

TV-Y7

TV-PG

Fantasy Violence

Dialog Language

TV-14

Sex Violence

Language

TV-MA

Sex Violence

Movie ratings lock

Note(s)

●

Blocked Sub Rating's

●

You cannot Block a Sub Rating if the Main Rating is set to E.

●

Changing the Category to G or E automatically changes All its Sub Ratings to the same (G or E).

will appear beside the Main Rating category in TV ratings lock Menu.

Continued on next page.

Please enter your current PIN.

Change PIN

Software

Installation

Features

Sound

Picture

Settings assistant

Reset AV settings

Network settings a

Location

Autoprogram

English

Restore default settings

Network

Preferences

Channels

Language

Software

Installation

Features

Sound

Picture

Settings assistant

Restore default settings

Network

Preferences

Channels

Language

Español

Français

English

36 .English

Canadian English or Canadian French Ratings

You can select the Rating for Canadian English or Canadian French broadcasting.

Use H I to select Canadian English rating or Canadian French rating, then press OK.

Use H I to select the Desired Rating, then press OK to Switch between Block and View.

●

G indicates that the Rating is Locked (Block).

●

indicates that the Rating is Not Locked (View).

Canadian

English rating

C8+

–

14+

–

18+ 18 ans+

Canadian

French rating

All

8 ans+

13 ans+

16 ans+

Description

Locked All Ratings

Exempt Program

– For All Children

– For All Children 8 and Older

General Audience

Unsuitable for Ages under 8

– Parental Guidance Suggested

Unsuitable for Ages under 13

– Unsuitable for Ages under 14

Unsuitable for Ages under 16

Adult Audience Only

Repeatedly

Installation

Press Q (MENU) and use H I J K to select Setup then press OK.

Use H I to select Installation, then press OK.

Adjust the following items.

Language

Use H I to select Language, then press OK.

Note(s)

●

V-Chip

The Block NR, None or E Programs are used in Movie ratings lock, TV ratings lock, Canadian English rating or Canadian French rating accordingly “unusual results may occur and the Unit may not Receive Emergency Bulletins or other Types of Programming”: / Emergency Bulletins (Such as EAS messages, Weather Warnings and Others) / Locally originated Programming / News / Political / Public Service Announcements / Religious / Sports / Weather.

Block Non Rated Programs as per “CEA-608-E sec. L.3”. If the Option to

can

Change PIN

Although the default PIN code (0000) is supplied with the Unit, you can set your own PIN code.

Use H I to select Change PIN, then press OK.

Press the NUMBER buttons to enter the New 4-digit PIN code.

●

Enter PIN code again to confirm.

Note(s)

●

Make sure new PIN code and confirm PIN code must be exactly the same. If they are different, the space is cleared for reentering.

●

If you have forgotten your PIN code, enter 0711 to reset the PIN code.

Use H I to select English, Español or Français, then press OK.

Note(s)

●

you

If Use H I J K to select Configuración or Configuration, then press OK. Use H I to select Instalación or Installation, then press OK. Use H I to select Idioma or Langue, then press OK. Use H I to select English, then press OK. Press Q (MENU) to exit the Home menu.

the English menu instead of the Spanish or French menu’s, press Q (MENU).

need

Continued on next page.

Stop

complete.

Auto programming may take more than 20 minutes to

Analog channels found:

Digital channels found:

System searching. Please wait...

37 .English

Channel installation

Be sure the RF cable is correctly connected to this Unit and you are registered with your Cable TV provider when you Install Cable channels.

Autoprogram

If you switch wires (e.g. between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channels

you

deleted, a new channel search. You need to select the signal type in Installation mode before you perform AutoProgram.

Use H I to select Channels, then press

Use H I to select Autoprogram, then press OK.

●

If you run Autoprogram when you have Locked Channels, a Message appears asking to enter your PIN. Enter your PIN in order to Complete the Installation. You need to set the Channel Lock again after the Installation.

Press OK to select Start now.

●

When the Scanning and Memorizing of Available Channels is Completed, the Lowest Memorized Channel will be Displayed.

Follow the On-screen Instructions to Complete the Installation.

it is recommended to use AutoProgram to perform

OK.

Weak channel installation

This function lets you add the channels that were not added by the AutoProgram due to the reception conditions during the initial setup. It is available only when you select Antenna in Installation mode.

Use H I to select Channels, then press OK.

Use H I to select Weak channel installation, then press OK.

●

The PIN code will be required if you have locked channels.

Use J K to select channel Input box, then use H I to select a channel you want to memorize.

Use J K to select Search, then press OK.

Display will be changed to Store

from Search when the channel is

found, then press OK.

Note(s)

●

In most cases, on your TV. To add Digital channels you need to know the RF channel on which the Digital channel is being broadcast. (e.g. If there is a Digital channel 9.1 which is being broadcast on RF channel 25, you need to enter 25 while performing a weak channel installation.) To find out the RF channel on which a particular Digital channel is being broadcast, please contact your local service provider. Installing Digital channels using Weak channel installation might not work for direct cable connections and if the Digital signal is too weak for the TV to process.

Digital channels are not broadcast on the RF channel on which they appear

Installation mode

Note(s)

●

After setting Autoprogram, using CH + / – skips unavailable channels automatically.

●

If you are not receiving a signal from your Cable service, contact the Cable provider.

●

If you press B

●

Even if Autoprogram is completed, the channel setting will be lost if the AC power cord is unplugged before the unit goes into Standby mode by pressing B.

●

The PIN Code will be required Once you set a PIN code in the Child and Ratings Lock.

L p. 34

●

If you want to change your PIN code, follow the instruction for Change PIN. L p. 36

during Autoprogram, the setup of TV channels will be cancelled.

Use H I to select Channels, then press OK.

Use H I to select Installation mode, then press OK.

Use H I to select Antenna

●

When Antenna is selected, the TV detects antenna signals. It

or Cable

, then press OK.

searches for DTV and Analog TV channels available in your area.

●

When Cable is selected, the TV detects signals supplied by cable. It searches for DTV, Analog TV and Cable channels available in your area.

Uninstall channels

The channels selected here can be skipped when selecting the channels using CH + / –.

Those channels can still be selected with the NUMBER buttons.

Use H I to select Channels, then press OK.

Use H I

Use H I to select the channel you want to remove, then press

to select Uninstall channels, then press

OK.

●

The removed channels are not displayed on the list of Favorite channels.

●

To reactivate a removed channel, use H I then press OK.

OK.

Continued on next page.

Restore default settings

Network

Preferences

Channels

Language

Home

Retail

TV placement

EasyLink

Location

38 .English

Preferences

You can set the unit to reduce the power consumption or adjust the backlight brightness in Location setting. In TV placement the best sound effect. EasyLink allows you to operate your connected EasyLink device.

Setting your location to home

Choosing Home gives you full picture and sound.

Use H I to select Preferences, then press OK.

Use H I to select Location, then press OK.

setting, you can set the unit placement in order to obtain

flexibility to change predefined settings for

Use Philips EasyLink

Your TV supports Philips EasyLink, which enables one-touch play and onetouch Standby between EasyLink-compliant devices. Compliant devices must be connected via an HDMI connector.

One-touch play

When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. For example, when you press K (Play) on your DVD remote control, your TV automatically switches to the correct channel to show the DVD content.

One-touch Standby

When you connect your TV to devices that support Standby, you can use your TV remote control to put your TV and all connected HDMI devices in Standby mode. You can perform one-touch Standby using the remote control from any of the connected HDMI devices.

System audio control

When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device. To use one-touch audio, you must map the audio input from the connected device to your TV. You can use the remote control from the connected device to adjust the volume.

Remote control (RC) key forwarding

RC key forwarding allows you to control EasyLink-compliant devices using your TV remote control.

Use H I to select Home, then press OK.

Retail

Home

Note(s)

●

You

set Home

must

Not Be Memorized after the Unit goes into Standby Mode.

●

If you select Home, E-sticker will not be displayed.

The Unit will be set up with predefined settings for

displays.

retail brighter.

The Unit is set to maximize the energy efficiency for Home

setting and of Picture and Sound quality selections according to your preference.

in the Menu. Otherwise, personalized Picture and Sound Settings will

this setting, you can set the backlight

it can be adjusted through a choice

TV placement

To apply the best settings for your TV, select wall mount or stand mount.

Use H I to select Preferences, then press OK.

Use H I to select TV placement, then press OK.

Use H I to select Wall mounted

or On a TV stand, then press

E-sticker

When you set Location to Retail, E-sticker (Electronic Sticker) is displayed. E-sticker can be Turned Off using procedure below.

Use H I to select Preferences, then press OK.

Use H I to select E-sticker, then press OK.

Use H I to select Off, then press OK.

HDMI-ARC (Audio Return Channel) (HDMI 1 only)

HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to a connected Audio device, without the need for an additional Digital Audio cable. Be sure that the device is HDMI CEC and ARC compliant, and that the TV is connected to the device using an HDMI cable attached to both HDMI-ARC connectors.

Note(s)

●

Philips does not guarantee 100% interoperability with all HDMI CEC devices.

●

The EasyLink-compliant device must be Switched On and selected as the source.

Continued on next page.

Select

Off

Select

Device List

HDMI-ARC

RC key forwarding

Auto TV On

Master EasyLink

TV placement

EasyLink

Location

DVD recorderHDMI1

Back

Refresh

Device List

HDMI3: Home theater system

HDMI2: Blu-ray disc player

39 .English

EasyLink (HDMI CEC)

This function allows you to operate the linked functions between our brand Devices with a EasyLink feature and this unit connecting through an HDMI cable. and be sure its EasyLink (HDMI CEC) setting is also set to On.

Use H I to select Preferences, then press OK.

Use H I

Use H I J K to select the item you want to adjust, then press OK.

Set the Master EasyLink to On or Off. The following additional settings will not be displayed when you set to Off.

Master

EasyLink

You must connect this unit to our brand EasyLink devices

to select EasyLink

Off

, then press OK.

Disables All EasyLink.

Selects if you have connected an External Device that is compatible with the EasyLink function.

HDMI-ARC allows you to use Philips EasyLink to output TV Audio directly to a connected Audio device, without the need for an additional Digital Audio cable.

HDMI-ARC

(HDMI 1 only)

Off

Disable HDMI-ARC.

You can output TV Audio through the HDMI

cable solely, TV and device are HDMI-ARC compliant.

provided both the

Device List

This function lets you see the product model number or name of Connected Devices.

Use H I to select the then press OK.

Your connected EasyLink device will be Turned On if the device is in Stand by mode.

desired EasyLink Devices listed on the TV screen,

This unit will Turn On when the Power On signal is sent from your connected EasyLink device.

Off

Auto TV On

You can operate some functions such as disc playback or call up the menu of the connected devices, by using this unit’s remote control.

You can set each HDMI input to activate the RC key forwarding. Each press of OK will toggle RC key forwarding On or Off.

●

G indicates that the RC key forwarding is On.

●

E indicates that the RC key forwarding is Off

HDMI1

RC key

forwarding

●

Pause may not work properly on some devices even if they are EasyLink (HDMI CEC) compliant.

Note(s)

HDMI2

HDMI3

This unit stays in Standby mode even if you Turn On your connected EasyLink device.

This unit Turns On Automatically when you Turn On your connected EasyLink device.

PLAY, PAUSE K F / STOP C FWD D H I J K / OK / Y BACK / the NUMBER buttons can be used to

control your connected EasyLink devices by this unit’s remote control.

/ REV E / U OPTIONS /

Continued on next page.

123 456789 0

abcde f gh i j

klmnopqrst

uvwxyz . -_

―

OKCancela/A/@All clearClear

Reset AV settings

Network settings a

Location

Autoprogram

English

Restore default settings

Network

Preferences

Channels

Language

Software

Installation

Features

Sound

Picture

Settings assistant

Start now

Renderer

Information

Start now

Network selection

Start now

Reset network settings

Home network

Setting status

Connection test

Manual network settings

Network settings assistant

Restore default settings

Network

Preferences

Channels

Language

Wired

Wireless

Cancel

www.philips.com/support

downloaded from

the latest TV software can be

If not connected to the network,

Select your connection type.

home network.

This TV can be connected to your

40 .English

Network

Set up Network connection settings in order to use Net TV or Network Upgrade function.

●

The meanings of abbreviations are defined as below.

AP WPS SSID

●

The key entry screen will appear when you select SSID, WEP / WPA / WPA2 or Proxy address.

●

Enter the key of the selected wireless network using H I J K, then press OK.

Clear All clear a/A/@ Cancel OK

: Wireless LAN Access Point : Wi-Fi protected Setup : Wireless network name

: Clear the entered number or word. : Clear all the entered numbers or words. : Switch between abc, ABC and @!? : Shows the cancellation display. : Set the entered number or word.

Network settings assistant

Before you proceed to Connection test or other settings in Network section, run the Network settings assistant to connect the TV to your Network.

Use H I to select Network settings assistant then press OK.

Press OK to select Start now.

Wireless setting

Select to use a wireless LAN to connect to the internet by a wireless connection.

Use H I

to select

Wireless

, then press OK.

Use H I to select Network, then press OK.

Use H I to select the desired setting, then press OK, and follow

the On-screen Instructions.

Select this setting if your router has a Wi-Fi Protected Setup (WPS) button. Start scanning

Easy Connect

Scan

Manual

WPS (Easy Connect)

to WEP. Change the Access Point’s security mode from WEP to WPA or WPA2 (recommended).

for wireless networks on the TV after pressing the WPS button on your router. If connection test fails, try Easy Connect again.* If it fails then refer to the router’s manual for more details.

Search for Wireless Networks automatically and select the Wireless Network name (SSID) from the list. Wireless network setting L

Set up the connection to the Wireless LAN Access Point (AP) by entering the Wireless Network name (SSID).

cannot be used when the security protocol is set

(e.g. wireless router) manually

p. 41

Wired setting

Select to use an Ethernet cable to connect to the internet by a wired connection. Please purchase shielded Ethernet cables at your local store and use it when you connect to Network equipment.

Use H I to select Wired, then press OK.

●

Connection test

will start automatically. L

p. 43

Continued on next page.

Proxy setting

IP setting mode

Auto

Wireless

Proxy configuration

IP configuration

Wireless network setting

Network selection

Reset network settings

Home network

Setting status

Connection test

Manual network settings

Network settings assistant

Select

Enter Key

Select

Enter Key

Router 4

Router 3

Router 2

Router 1

Manually enter your SSID

Auto

41 .English

Manual network settings

Use H I to select Manual network settings, then press OK.

Network selection

Use H I to select Network selection, then press OK.

Use H I to select the desired setting, then press OK.

Wired

Wireless

Wireless network setting

This menu is displayed only when you set Wireless in Network selection. In order to use a wireless network, you must set up a

connection to the AP (e.g. wireless router).

Use H I to select Wireless network setting, then press OK.

Auto

Search for wireless networks automatically and select the SSID from the list.

Use H I to select Auto, then press OK.

The list of wireless networks will be displayed. Use H I to select the appropriate the SSID, then press OK.

If you connect to an Ethernet cable, select Wired to connect to the Internet.

If you have a router with WPS function, select Wireless to connect to the Internet.

Select this setting if your router has a Wi-Fi Protected Setup (WPS) button. Start scanning

Easy Connect

for wireless networks on the TV after pressing the WPS button on your router. If connection test fails, try Easy Connect again.*1 If it fails then refer to the router’s manual for more details.

Select this setting if your router has a WPS but

WPS code

does not have a WPS button. Enter the 8-digit WPS

PIN code

shown on your TV in the router

settings menu via PC before Connect is selected.

If your wireless network with authentication setting (WEP*2, WPA or WPA2), WEP*2 /

Manual

WPA / WPA2 the WEP*2 / WPA / WPA2 key of the selected

Key entry screen will appear. Enter

wireless network using H I J K, then press

OK.

*1 WPS (Easy Connect) cannot be used when the security protocol

is set to

WEP. Change the Access Point’s security mode from WEP

to WPA or WPA2 (recommended).

*2 WEP is not recommended to be used due to its Major security

flaws. Change the Security protocol on the wireless router to WPA or WPA2 (recommended) mode.

Confirmation message will appear. Select OK to complete the settings.

Note(s)

●

For a wireless network with authentication setting, key icon appears to the right hand of the SSID.

●

Signal icon shows the strength of the signal.

●

WEP*2 / WPA key appears as asterisks on the confirmation screen.

●

The wireless LAN supports following specifications.

–

Wireless standards: IEEE 802.11 b/g/n

–

Frequency spectrum: 2.4GHz

–

Security protocol: WEP*2 / WPA / WPA2

●

If you select the SSID with , WEP*2 / WPA / WPA2 Key entry

screen will appear. Enter the WEP*2 / WPA / WPA2 key of the selected wireless network using H

●

If you select the SSID has a WPS, the WPS setting screen will appear. Use H I J K to select a setting, then press OK.

I J K, then press OK.

Continued on next page.

XXXXXXXXXXXXXX

WEP

None

Manually enter your SSID

Auto

WPA/WPA2

192.168.11.3

255.255.255.0

192.168.11.1

0.0.0.0 00:12:0E:10:09:15

Manual

MAC address

Secondary DNS

Primary DNS

Default gateway

Subnet mask

IP address

IP setting mode

Proxy configuration

IP configuration

Wireless network setting

Network selection

42 .English

Manually enter your SSID

Set up the

connection to the AP (e.g. wireless router) manually by entering

the SSID.

Use H I

●

to select Manually enter your SSID, then press OK

AP (e.g. wireless router) SSID entry screen will appear.

Enter the SSID using H I J K, then press OK.

Use H I to select the authentication setting of the selected wireless network.

●

For a wireless network with authentication setting, select the authentication setting, according to the security type of the wireless network.

None

WEP

WPA/WPA2

●

For a wireless network without authentication setting, select None.

●

If you select WEP* or WPA/WPA2, WEP* / WPA / WPA2 Key entry screen will appear.

Set the authentication setting to None.

Set the authentication setting to WEP*.

Set the authentication setting to WPA/WPA2

Enter the WEP* / WPA / WPA2 key of the selected

wireless network using H I J K, then press OK.

●

Confirmation message will appear. Select Yes to complete the settings.

* WEP is not recommended to be used due to its Major security flaws.

Change the Security protocol on the wireless router to WPA or WPA2 (recommended) mode.

IP configuration

following cases,

–

When connection test failed with the setting of Connection test.

–

When instructed by your Internet service provider to make specific settings in accordance with your network environment.

Use H I

Use H I to select a setting, then press OK.

IP setting

mode

IP address *1, 3

Subnet mask *1, 3

Default gateway *1, 3

DNS

setting

mode

Primary DNS *2, 3

Secondary DNS *2, 3

MAC address

select IP configuration to set each setting as necessary.

to select IP configuration, then press OK

Auto

Manual

Sets the IP setting automatically.

Sets the IP setting manually.

A set of numbers which are assigned to devices participating in a computer network.

A mask which is used to determine what subnet an IP address belongs to.

IP address of the network device (such as router) which provides Internet access.

Auto

Manual

Sets the DNS setting automatically.

Sets the DNS setting manually.

A server which handles the name and IP address over the Internet.

An address which recognizes the devices connecting

to the

network. It is also called

Hardware Address.

*1 Items can be selected only when IP setting mode is set to

Manual.

*2 Items can be selected only when DNS setting mode is set to

Manual.

Use H I or the NUMBER buttons to input numbers. When you use H I to input

numbers, then press OK or input the triple digits

by using the NUMBER buttons, the cursor moves to the next entry field. When you use H I to input numbers, then press OK or input the triple digits by using the NUMBER buttons at the rightmost entry field, numbers will be stored and go back to the previous

menu.

Continued on next page.

Do not useProxy setting

Proxy configuration

IP configuration

Wireless network setting

Network selection

43 .English

Note(s)

●

The range of input numbers is between 0 and 255.

●

If you enter a number larger than 255, the number will automatically be 255.

●

The manually entered number will be saved even if you change the setting to Auto.

●

If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.

●

If the entered IP address or the default gateway or primary DNS number is same as the default setting, IP address setting will be set to Auto. (The manually entered number will be saved).

●

When

IP address Manual and when IP address setting is set to Auto, you can set either Auto or Manual for DNS setting.

setting is set to Manual, the setting of DNS setting will automatically be

Proxy configuration

Use H I to select Proxy configuration, then press OK.

Use H I to select a setting, then press OK.

●

Do not use is selected for default settings.

●

If you need to change the proxy setting as instructed by your Internet service provider port, select Use.

Proxy setting

Proxy address *

Proxy port *

Do not use

to set the designated proxy address and

Does Not use the proxy server.

Use

Uses the proxy server.

Selects the number or word by using H I J K, then press OK.

Use H I or the NUMBER

buttons to input numbers.

Connection test

Perform the following steps to test your internet connection after you have connected an Ethernet cable or entered Network settings such as IP address, DNS settings, etc. manually.

Use H I Press OK to select Start now.

●

to select

Connection test, then press OK

Connection test will start automatically and the test result for Home Network and Internet will appear right after the connection test finishes.

●

“Testing…” is displayed while the connection test is in progress.

Home Network Internet Description

Pass Pass

Connection test is successfully completed.

Connection test for Home

Fail

Network failed. Check the connection settings.

Pass Fail

●

If the connection test for Internet passes, speed test will start

Connection test for Internet failed. Check the connection settings.

automatically.

Press OK to go to the list of Network status confirmation screen.

Note(s)

●

If the connection test for both Home Network and Internet pass, you are ready to use Net TV or Network Upgrade function using the internet without making any additional settings.

●

the connection

if you have entered all the required details for the wireless LAN connection properly.

test fails, check if the Ethernet cable is connected to this TV properly or

Setting status

You can check the status of network settings.

Use H I to select Setting status, then press OK.

●

Network setting list will be displayed.

●

MAC address of this unit will be displayed in the list.

* Items can be selected only when Proxy setting is set to Use.

Note(s)

●

The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)

●

For

proxy port,

your network environment.

●

If the proxy address is entered with blank only, proxy server setting will be set to Do not use.

the selected ports may be blocked and not be able to use depending on

Continued on next page.

YouTube deactivation

VUDU deactivation

Netflix ESN

Netflix deactivation

Automatically check for

Software update

Software information

Software

Installation

Features

Sound

Picture

Settings assistant

Off

USB

Select

Digital rights mgmt

PHL-XXXX_XXX_X

YouTube deactivation

VUDU deactivation

Netflix ESN

Netflix deactivation

Automatically check for

Software update

Software information

Software

Installation

Features

Sound

Picture

Settings assistant

Digital rights mgmt

44 .English

Home network

You can turn your TV into Digital Media Renderer (DMR), which can play video, music and photo files stored on DLNA certified home media servers connected to your home network by using Digital Media Controllers (DMC).

Use H I to select Home network, then press OK.

Use H I J K to select the item you want to adjust, then press OK.

Enable this unit to play files by using DMC.

Disable DMR.

Renderer

Renderer name

Off

Change the display name on DMC

Reset network settings

You can reset the status of network settings.

Use H I to select Reset network settings, then press OK

Press OK to select Start now.

Return your settings to default values

Software

Philips continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available.

New software can be downloaded from our website at www.philips.com/support information.

Press Q

OK.

Use H I to select Software, then press OK.

(MENU) and use H I J K to select Setup then press

using the model number of your TV to find

You can return settings to their default values.

Use H I to select Restore default settings, then press OK.

Use H I to select Reset AV settings or Reset all settings, then press OK.

Reset AV settings

Reset all settings

Press OK to select Start now.

Return picture and sound settings to their default values. The channel installation settings are not affected.

Return all the settings to their default values.

Note(s)

●

Digital Rights Management

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

Checking your current software version

Use H I to select Software information, then press OK.

●

version and

The

a description of the current software is displayed.

Continued on next page.

Update your TV with new software:

upgrade is in progress.

Do not remove the USB storage device or turn the TV off while

Software update is in progress. Please wait.

45 .English

Preparing for the software upgrade

You require the following equipment:

–

A PC with web browsing capability

–

An archive utility that supports the ZIP-format (e.g. WinZip for Windows or StuffIt for Mac OS)

–

An empty clean formatted USB Memory Stick

Note(s)

●

Only FAT / DOS-formatted portable memory is supported.

●

Use only software upgrades that can be found on the Philips web site.

Warning

●

When the software upgrade is running, don’t press any buttons.

●

Do not remove the USB Memory Stick during the software upgrade.

●

an error

occurs during the upgrade, retry the procedure or for further assistance, please

If contact Call Center.

Downloading the software

Find information and software related to your TV and download the latest software upgrade file to your PC.

On your PC, open a web browser and go to

www.philips.com/support.

Enter the model number in the “Type the Model Number...” field.

Click the desired software to be downloaded.

●

Decompress the ZIP-file.

the

Copy

upgrade

file to the root directory of the USB Memory Stick.

Upgrading the software

USB upgrade

You can upgrade the software by using USB Memory Stick.

Connect your USB Memory Stick with the upgrade file to the USB

terminal on the side of your TV.

Use H I to select Software update, then press OK.

Use H I to select USB, then press OK.

Use H I to select the desired Update file.

Use J K to select Yes, then press OK.

Read the on-screen instructions and confirm that you want to

continue with the installation.

When the software upgrade is completed, press B to set the unit into Standby mode, then remove the USB Memory Stick.

Unplug the AC power cord for a few seconds from AC outlet and

plug it again.

Press B

●

For further assistance, please contact Call Center.

again to Turn the unit On.

The TV starts up with the new software.

Continued on next page.

46 .English

Network updates

You can update the software by connecting the unit to the Internet.

Use H I to select Software update, then press OK.

Use H I to select Network, then press OK.

Use J K to select Yes, then press OK.

●

unit will

This version.

Confirmation message will appear.

Use J K to select Yes, then press OK.

●

The unit will start downloading the latest FirmWare (software) version.

●

The unit will start updating the FirmWare (software) version.

●

It may take a while to complete the updating.

When the software update is complete, press B to make sure the unit goes to Standby mode.

Unplug the AC power cord for a few seconds from AC outlet and

plug it again.

Press B again to Turn the unit On.

●

The TV starts up with the new software.

For further assistance, please contact Call Center.

then start checking for the latest FirmWare (software)

Netflix ESN

Displays the ESN information.

Use H I to select Netflix ESN, then press OK.

●

Displays the ESN (Electronic Serial Number) to get any services from Netflix.

VUDU deactivation

Displays the deactivation setting for VUDU.

Use H I to select VUDU deactivation, then press OK.

Use H I

to select the desired option, then press OK.

Yes

Deactivate the connection to VUDU.

Activate the connection to VUDU.

YouTube deactivation

Displays the deactivation setting for YouTube.

Use H I to select YouTube deactivation, then press OK.

Use H I to select the desired option, then press OK.

Yes

Deactivate the connection to YouTube.

Activate the connection to YouTube.

Note(s)

●

In order to update software via the Internet, you must connect the unit to the Internet and set up necessary settings.

Network settings assistant L

●

Please do not unplug the AC power cord or Ethernet cable while executing the Network updates.

●

All settings will remain the same even if you update the software version.

●

The version of Net service will also be updated if newer version of Net service is available when updating the firmware.

●

When you start up the TV or a net service after executing the software update, a message may appear on the screen prompting for software update again. In this case, please select Update to start USB update or network update. For further assistance, please contact call center.

p. 40; Network L p. 40

Automatically check for latest software

This function lets you know if the latest software is available while the unit is connected to the Internet.

Use H I to select Automatically check for latest software, then press OK.

Use H I to select the desired option, then press OK.

Off

Disable automatically check for latest software.

A message will appear if there is the latest software on the network server.

Netflix deactivation

License

Displays the Licenses of Open Source Software used in this unit.

Use H I

●

to select License

Licenses of Open Source Software used in this unit are displayed.

, then press OK.

Displays the deactivation setting for Netflix.

1 2

Use H I

Use

to select Netflix deactivation, then press OK.

H I to select the desired option, then press OK.

Yes

Deactivate the connection to Netflix.

Activate the connection to Netflix.

Continued on next page.

47 .English

Philips Wirelessconnect

You can enjoy your TV as a PC monitor wirelessly using your Home Network. Make sure you download the Philips Wirelessconnect Software and install it on your PC before you perform the steps below.

Install Philips Wirelessconnect

Display Setup using Home Menu and use H I to select Software, then press OK.

Use H I to select Wirelessconnect code, then press OK.

●

Write down the 12-digit code displayed on the screen. You will need this to download Philips Wirelessconnect Software.

Start your internet browser on your PC and open the Philips

Wirelessconnect download page at

www.wifimediaconnect.philips.com/

On the website, you can check the necessary PC system requirements.

Enter the 12-digit code you wrote at step 2.

Click the ‘Download now’ button to download the free Philips

Wirelessconnect Software.

Once downloaded, run the Philips Wirelessconnect Software

installer.

Follow the

installation.

instructions on the screen to complete Software

Using Philips Wirelessconnect

Launch Philips Wirelessconnect on your PC first.

●

Right on the

●

The start up screen for Philips Wirelessconnect will be displayed and the Unit searches for an available PC that is running Philips Wirelessconnect Software.

Once connected, the Philips Wirelessconnect Software will encode and stream the screen of your PC as a video along with audio.

Depending on your computer and Network configuration, there will be a delay between your PC screen and the TV but the audio-video will always be in sync.

Note(s)

●

If the “Start firewall Software on the computer.

Projecting” is not available, please allow Wirelessconnect access through your

Philips Wirelessconnect Help

To read the the notification tray of the PC and select Help.

Philips Wirelessconnect Help, right click the program icon in

Specifics

You can project high definition (HD) or standard definition (SD) video, depending on the processing power of your PC. For smooth playback of HD video, please use a hardware accelerated video player on your computer. A hardware accelerated video player uses the graphics adapter of your PC to render HD video rather than the processor. This frees up the processor for Philips Wirelessconnect video encoding. The content protection on most DVD or Blu-ray Disc movies might restrict watching the movie on TV when the disc is playing on a PC. The TV shows PC media files with a small delay. Philips Wirelessconnect is only available for PC.

PC requirements

Windows XP, Windows Vista, Windows 7, Windows 8

Mac OS X 10.6 or above

Minimum PC requirements

●

IntelN Core™ 2 Duo 1.8GHz

●

512MB RAM

●

IEEE 802.11n

Recommended PC requirements

●

IntelN Core™ 2 Duo 2.1GHz

●

1GB RAM

and select “Start Projecting”.

Continued on next page.

00:05:28

Year:

Duration:

Album:

Title:

Blue hills

Video10

Highway Blues

Folder

Video

Photos

Audio

Server 3

Server 2

Server 1

48 .English

View photos, play music and watch videos using DLNA

On your TV you can play video, music and photo files stored on DLNA certified home media to use this feature, you must connect this unit to the Internet.

It is recommended that files to be played back in this unit are recorded under the following specifications:

<MP3>

Sampling frequency : 32kHz or 44.1kHz or 48kHz

Constant bit rate: : 32kbps - 320kbps

<JPEG>

Upper limit : 16Mpixel

<MPEG>

Playable codec : MPEG1, MPEG2, MPEG4

Maximum size of a video : 1920 x 1080

Audio type : AC3, MPEG1 audio layer 3 (MP3),

Note(s)

●

A maximum of 1,023 folders or files can be recognized.

●

For the home server list, maximum of 16 servers can be displayed.

●

The 10th and deeper hierarchies cannot be displayed.

●

Unplayable files in the home server will not be displayed in the file list.

●

For some files, playback is not available even if displayed in the file list.

●

In order to play back the contents in home servers, the player and the servers must be connected to the same access point.

●

Compatibility and available playback function may differ depending on the home server.

●

Video files with unsupported audio format will be skipped.

●

quality of

The

servers connected to your home network. In order

MPEG1 audio layer 2, LPCM

the playback picture or audio differs depending on your network condition

Using DLNA

Start DLNA home media servers in your home network.

●

For details, refer to the instruction book of the DLNA certified device.

Press Q (MENU) on the remote control.

Use H I J K to select Browse PC.

●

This unit will start loading the home server list.

loading, home

After

server list will appear. Select a home server you

want to access, then press OK.

Guide to DLNA

Home server list

Folder / media icon

Group (folder) / file list

Image

Current file info

Before using DLNA

Follow the procedure below before using DLNA.

Connect this unit to the Internet.

Connecting the TV to the Internet using an Ethernet cable L p. 17 or Connecting the TV to the Internet using a Wireless LAN L p. 18

●

Broadband Internet connection of 8Mbps or faster is required.

Set up the necessary network connection settings. Network L p. 40

Continued on next page.

49 .English

View your pictures using DLNA

Press H I to select a file or a folder.

Press OK

●

Press OK or K F to pause the Slide show. The F icon appears.

●

Press E or D to move between images.

●

Press Y BACK or C to stop the Slide show.

●

Press U OPTIONS to display the optional menu, then use H I to select the desired item.

Slide time *1

Transitions *1

Rotate *2

Zoom *2

*1 You can set Slide time and Transitions when images are in Slide

show.

*2 You can set Rotate

F to start a Slide show of the files.

or K

Short

Medium

Long

None

Dissolve

Wipe right

Wipe left

Wipe up

Wipe down

Box in

Box out

180

270

Switches to the next image in 5 seconds.

Switches to the next image in 10 seconds.

Switches to the next image in 15 seconds.

No effect when switching images.

Overlaps a next image on a current image.

Pushes a current image out from left.

Pushes a current image out from right.

Pushes a current image out from bottom.

Pushes a current image out from top.

A next image comes into the center from out.

A next image goes to the out from center.

Displays an image at its original direction.

Rotates an image clockwise by 90 degrees.

Rotates an image clockwise 180 degrees.

Rotates an image clockwise 270 degrees.

Displays an image at its original size.

Magnifies a current image as twice.

Magnifies a current image as fourfold.

and Zoom when Slide show is in pause mode.

Listen to music using DLNA

Press H I to select a file or a folder.

Press OK or K F to play the selected files.

●

Press OK or K F to pause, press OK or K F

●

Press D

●

Press E to skip down the previous file.

●

Press C to stop playback.

●

Press U OPTIONS to display the optional menu, then use H I

to skip up the next file.

again to resume.

to select the desired item.

Repeat

Shuffle

Speakers

Off

Speakers

EasyLink

Sets repeat playback to off. Sets repeat playback for all MP3 files in the

current folder. Sets shuffle playback to off. Sets shuffle playback for all MP3 files in the

current folder. The sound will not be output from the

unit's speakers. The sound will be output from the unit's

speakers. You can control audio output from your

connected EasyLink Compliant Devices with VOL

+ / − by using this unit's remote

control.

Note(s)

●

Master EasyLink must be activated in the Preferences menu to make the TV Speakers menu available when you select On or Speakers EasyLink.

Watch videos using DLNA

Press H I to select a file or a folder.

Press OK or K F to play the selected files.

●

Press OK or K F to pause, press OK or K F

●

Press D

●

Press E to fast-backward search.

●

Press C to stop playback.

●

Press K F to resume from the point at which playback was

to fast-forward search.

stopped. Press OK to play from the beginning of the file at which playback was stopped.

●

Press CH + to play the next file.

●

Press CH - to play the current file at the beginning. Press CH - twice within 5 seconds to play the previous file.

●

Press U OPTIONS to display the optional menu, then use H I to select the desired item.

The sound will not be output from the unit's speakers.

The sound will be output from the unit's speakers.

You can control audio output from your connected EasyLink Compliant Devices with VOL + /

− by using this unit's remote

Speakers

Off

Speakers

EasyLink

control.

again to resume.

Note(s)

●

The resume information will be kept even when the unit is Turned Off.

●

If you play another file while the previously viewed file is being resumed, the resume information of the previously viewed file will be deleted.

Continued on next page.

APP1

My Apps

APP2 APP3 APP4

: USA

App Gallery

CountryTerms of Use

App Gallery

XXXXX XXXXX

XXXXX

All

50 .English

Net TV

Net TV offers Internet services for your TV. Use the TV Remote Control to browse the Net TV pages. You can play movies, listen to music and much more, all from your TV screen.

–

Because Net TV better serve its purpose.

–

Some Net TV services can be added, changed or stopped after some time.

–

You cannot download and save files or install plug-ins.

Before Logging in to Net TV

Follow the procedure below before logging in to Net TV.

Connect this Unit to the internet.

1 2

Set up the necessary Network connection settings. Network L

Logging in to Net TV

Press NETTV.

●

Net TV screen will appear, then use H I J K to select service icon.

●

For the first time only, Terms of Use Internet Enabled product screen

Agree, then press OK.

Guide to Net TV screen

is an online system, it can be modified over time to

will

After confirming the content, use J K to select

appear.

My Apps functions

Remove App

Use H I J K to select the desired App, then press U OPTIONS

Use H I to select Remove App, then press OK.

●

The selected App will be removed from My Apps list.

Move App

Use H I J K

Use H I to select Move App, then press OK.

●

The selected App icon will be smaller.

Use H I J K to the point you want to place, then press OK.

to select the desired App, then press U OPTIONS

Guide to App Gallery

Category menu: List of category menu.

Icon list: Displays unregistered Net service icons on

My Apps list.

Page guide: Displays the order of pages. The current page

will be highlighted.

Net service icons (fixed): Displays default service icons.

My Apps list: Displays Net service icons you have

listed in App Gallery.

Country: Selects what country you live.

App Gallery: Displays currently available Net

service icons in your country.

Page guide: Displays the order of pages. The

current page will be highlighted.

APP1 / APP2 / APP3 / APP4:

Displays Net service icons you have registered in App Gallery for APP1 / APP2 / APP3 / APP4.

●

Press Apps buttons (red / green /

yellow / blue) to start up APP1 / APP2 / APP3 / APP4 accordingly.

Press Net TV, then use H I J K to select App Gallery.

Use H I J K to

select the

desired App in My Apps list, then press

OK.

●

You can also choose from Category menu. Use H I J K to select All, then use H I OK to select the desired category.

●

If you select Add, the selected App icon will be placed at the end of My Apps list.

●

If you select Add and move, the selected App icon will be smaller and use H I J K to the point you want to place, then press OK.

Even if you press Y BACK to cancel this function, the selected App icon will be placed at the end of My Apps list.

Information on Network Services

For detailed information on 3rd party Internet services, please visit the service providers website:

Netflix : VUDU : Cloud TV CinemaNow* : * CinemaNow is supported in 65PFL4909, 55PFL4909, 50PFL4909,

49PFL4909, 43PFL4909, 40PFL4909, 32PFL4909, 28PFL4909 only.

http://www.netflix.com http://www.vudu.com http://www.activevideo.com

http://www.cinemanow.com

Continued on next page.

XXXXX XXXXX

ABC

American Oldies Radio

4:52 0:00

Station ListTo o l M en uWhy this track?Exit

On:

By:

cbadef

51 .English

PandoraN operations

With this Unit, you can instantly listen to personalized radio stations streamed over the Internet from Pandora.

To learn more about Pandora, please visit www.pandora.com

Activating Pandora

In order to listen to Internet radio streamed from Pandora via the Internet, you must create a Pandora account and activate this Unit.

Press Net TV, then use H I J K to select PANDORA.

Use

H I to select Create new account, then press OK.

Use H I to select No, I am new to Pandora., then press OK. Note the activation code and website address displayed on the TV

screen. On your PC, visit the website address noted at step 4.

Follow directions on the website to create your account.

On this Unit, select Continue and press OK to complete activation.

Adding Pandora User Accounts

You can add multiple Pandora user accounts on this Unit.

Follow steps 1 to 2 in Activating Pandora. L p. 51

Use H I Enter your e-mail address, then press OK

Enter a password, then press OK while OK is selected.

4 5

Use H I to select Sign In, then press OK.

●

Note(s)

●

Pandora is available only in the United States.

●

You

can add

displayed.

to select Yes, I have a Pandora account., then press OK.

while OK is selected.

Your account is added to the user list and player screen appears on the TV screen.

up to 5 accounts. After creating 5 accounts, Create new account will not be

Guide to the Player Screen

On the player screen, you can set various options to the currently playing track.

Artist name : Displays artist name.

Album name : Displays album name.

Operation guide : Displays Apps buttons

: Give thumbs up to the currently playing

track. Pandora will play tracks similar to the track.

: Give thumbs down to the currently playing

track. Pandora will skip and will not play the track.

: Bookmarks the currently playing track.

You can view your bookmarked tracks list by accessing Pandora website and log into your account.

: Tells Pandora that you do not like the

currently playing track. Pandora will not play the track for about a month.

(red / green / yellow / blue) guide.

Creating a New Station

By entering your favorite artists or tracks, Pandora selects music and creates a new station for you on the basis of the entered information.

On the player screen, press Apps button (yellow) to call up the

Tool Menu.

Use H I to select Create a new station, then press OK. Enter a name of your favorite artist or tracks, then press OK while

is selected.

●

Search result will appear on the right side of the TV screen.

●

If the selection screen with the result type appears, use H select the desired type, then press OK.

Use H I to select the desired station, then press OK to start the playback.

K F

K K

Note(s)

●

On the Tool Menu, you can delete or rename the currently selected station.

Resumes the playback / pause the playback.

Stops the playback and the station list will appear.

Skips to the next track.

I to

6 Useful tips

FAQ

Question Answer

My Remote Control does not work. What should I do?

How come the Initial Setup appears every time I Turn On this Unit?

Why can I not watch some RF signal TV Programs?

How come there is no image from the Connected External Devices?

When I enter a channel number,

why does

Automatically?

Why are captions not displayed Entirely? Or why are captions delayed behind the dialog?

How can I set the clock?

My PIN code no longer works, how can Child Lock setting?

When I start up the TV or a net service, a message appears on the screen prompting for software update again.

it change

I change the

●

Check the Antenna or Cable Connection to the Main Unit.

●

Check the Batteries on the Remote Control.

●

Check if there is an obstacle between the infrared sensor window and the Remote Control.

●

Test the IR Signal Output use IR Signal Check. L p.

If okay, then possible Infrared Sensor trouble.

●

Aim the Remote Control directly at the infrared sensor window on the front of the Unit.

●

Reduce the distance to the Unit.

●

Re-insert the Batteries with their Polarities (+/–) as indicated.

●

When there

is an infrared-equipped device such as PC near this Unit, it may interrupt the Remote Control signal on this Unit. Move the infrared-equipped device away from this Unit, change the angle of the Device's infrared sensor or Turn Off the infrared communication function.

●

Make sure to complete the Initial Setup before the Unit goes into Standby mode.

●

Autoprogram must be completed when you Set Up the Unit for the First time or Move it to a location where previously unavailable channels are broadcast.

●

Make sure Autoprogram has been completed. L p. 37

●

The selected channel may not be broadcasting.

●

When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the Autoprogram. L p. 37

●

The selected channel cannot be viewed by the Child and Ratings Lock setting. L p. 34

●

The Unit requires some kind of Antenna Input. An indoor Antenna (Digital or VHF / UHF), an External Antenna (Digital or VHF / UHF) or an RF Coaxial Cable from your wall Cable / Satellite Set-top Box needs to be plugged into the Unit.

●

Check if the correct Input mode is selected by pressing S SOURCE. L p. 23

●

Check the Antenna, Cable or other Input Connection to the Unit.

●

When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the Unit.

●

Many Digital channels

have alternate channel numbers. The Unit changes the numbers Automatically to the ones signifying the Broadcasting Station's channel number. These basic numbers used for the previous Analog Broadcasts. (e.g., Input Digital ch# 30 Automatically changes to Digital ch# 8.1)

●

Closed Captions that are delayed a few seconds behind the actual dialog are common for Live broadcasts. Most captioning production companies can

display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective

editing is used to insure that the Closed Captions remain up-to date with the current TV screen dialog.

●

There is No clock function on this Unit.

●

Although the default PIN code (0000) is supplied with the Unit, the PIN code will be required once you set a PIN code in Child and ratings lock. L p.

34 When you forget your PIN code, enter 0711 in

Change PIN to reset the

PIN code.

L p. 36

●

p. 45

52 .English

Continued on next page.

Troubleshooting

If the Unit does not perform properly when operated as instructed in this User Manual,

check the following Troubleshooting tips and all connections once before calling for service.

Power

No Power

●

Make sure the AC Power Cord is plugged in.

●

Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into normally.

●

If a Power Failure occurs, Unplug the AC Power Cord for 1 minute to allow

the AC outlet to ensure that the AC outlet operates

the Unit to Reset Itself.

Remote

Control buttons do not work.

●

Do NOT press more than one button at the same time.

●

Ensure that no buttons on the Remote Control are depressed and move freely.

Universal Remote Control does not work properly.

●

Refer to the user manual of the universal remote control for the Philips code.

Picture

Power is ON but no screen image.

●

Check whether the Connection for the Antenna, Cable or Satellite Set-top Box is Connected Correctly.

●

Check whetherAll the Cables to the Unit are connected to the correct Output Jack on your device like Blu-ray / DVD recorder.

●

Make sure that the selected Input mode is connected to the working Input jack.

●

Check if your computer is NOT in Sleep Mode when the Input mode of this unit is in PC mode. Tap any key on the Computer Keyboard to Wake it up.

●

Check if the correct input mode is selected by pressing S SOURCE.

No Color

●

View other TV channels. The problem might be limited to the broadcasting station.

●

Adjust Color in Picture settings. L p. 30

Picture Poor

●

Adjust Contrast and Brightness in Picture settings. L p. 30

●

For the Best Picture Quality, watch “High Definition” wide screen Programs. If the HD content is Not available, watch “Standard Definition” Programs instead.

You see Pixelation on the Screen.

●

When the capabilities of the Unit exceed the capabilities of the Digital Broadcasting, the signal will be increased to match the capabilities of the Display on the Unit. This may cause Pixelation, Noise or Trash.

Unusual picture appears and the TV does Not operate.

●

Press the power button first. If it does not solve, follow the procedure below.

① Press the buttons on the remote control in the order shown below.

K L H L I L B

② Unplug the AC Power Cord once, and wait for 1 minute, and then plug it in again.

Sound

No sound, distorted sound or incorrect Audio Sound is heard when using the HDMI-DVI Connections.

●

Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio L/R Input jacks.

●

When using Component Analog Video, Composite Analog Video or PC VGA Video make sure that the Analog Audio (L/R) connectors are mounted into the Audio (L/R) Input jacks.

Sound Intermittent or No Sound.

●

Check if the Audio Cable is connected into the Unit correctly.

You Switch to a Different Input and the Volume Changes.

●

This Unit will Memorize the Volume Level from the last time you adjusted it.

●

If the Volume of the Sound from another Device is Higher or Lower, then the Loudness will Change.

●

Make sure Auto volume leveling is set to On. L p. 32

Picture & Sound

No Picture or Sound

●

Check if the Power is on.

●

whether All the cables to the Unit are connected to the correct Output

Check jack of your device like Blu-ray / DVD Recorder.

●

Check whether All the Cables to the Unit are connected to the correct Output Jack on your separate Device like Blu-ray Disc / DVD Recorder.

●

View other TV channels. The problem might be limited to the Broadcasting Station or Weak Signal Strength.

●

Unplug the AC Power Cord and wait for about 1 minute, then Plug the AC Power Cord and turn On the Unit again.

●

Check whether the connection of the Antenna or Cable / Satellite set-top box is connected correctly.

●

Make sure that the selected Input mode is connected to the working Input jack.

●

Check if your computer is NOT in sleep mode when the Input mode of this Unit is in PC mode. Tap any key on the keyboard to wake up your computer.

●

Make sure that the sound is not muted. Press V so that the volume bar and current volume level will appear on the TV screen.

●

Make sure that the volume is NOT set to 0 or C. If so, use VOL + / – to adjust to the desired volume.

●

Make sure that the headphone is NOT connected to the Headphone Audio Output jack.

●

Make sure that the TV speakers is NOT set to Off.

Adjusted Picture or Sound settings are not effective every time the Unit is turned On.

●

You must set Home in Location. L p. 38 (Otherwise, the settings you adjusted will not be memorized after the Unit goes into Standby Mode.)

You see a Distorted Picture or Hear an Unusual Sound. (Analog TV - NTSC signal)

●

You may be getting NTSC (Analog) TV signal (not HDTV signal) interference from electrical appliances, automobiles, motorcycles or fluorescent lights.

●

Try moving the Unit to another Location to see if this is the Cause of the Problem.

Ghosts, lines or streaks in picture.

●

Electrical Interference from nearby appliances may affect Picture Quality.

●

View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.

Picture Poor, Sound Intermittent or No Sound

●

View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.

Child and Rating Lock

Forgotten PIN code.

●

Enter “0711” to clear your password.

Screen

You Switch to a different Input and the Screen Size changes.

●

This unit will memorize the viewing mode from the last time you used the particular input modes.

The display image does not cover the entire screen.

●

If you are using the Unit as a PC Monitor, make sure that Horizontal position and Vertical position in Picture are set correctly. L p. 30

●

If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input, press R FORMAT Repeatedly to Switch to various Screen Modes.

Different color marks on the TV screen

●

View other TV channels. The problem might be limited to the broadcasting station, missing data or pixelation due to weak signal strength.

53 .English

Continued on next page.

54 .English

Closed Captions

Closed Captions are displayed as a white box. No Closed Captions are displayed in the Closed Captions-Supported Program.

●

Interference from buildings to be incomplete if watching Analog TV signals.

●

Broadcasting Station may shorten the program to insert advertisements.

or weather conditions may cause Closed Captions

The Closed Caption Decoder cannot read the information of the shortened program.

Black Box is displayed on the TV Screen.

●

The text mode is selected for caption. Select CC-1, CC-2, CC-3 or CC-4.

Software update

A message appears on the screen prompting for software update again.

●

p. 45

Network

Cannot connect to the network.

●

Check if the Ethernet cable connection is properly made. Turn On the modem or broadband router.

●

Check the network settings.

●

Check if the broadband router and/or modem is correctly connected.

Sometimes video quality is poor when using the wireless LAN.

●

The wireless network connection quality varies depending on the distance or obstacles (e.g. wall, basement, 2nd floor) between the TV Wireless LAN Adapter and the wireless router (access point), from other wireless networks, and brand and type of the wireless router (access point). When using the Wireless LAN of the TV, it is suggested to place the wireless router as close as possible to the Television.

Wireless LAN connection fails or wireless connection is poor.

●

Check the installation location of the TV and wireless router (access point). Signal quality may be affected for the following reasons.

–

Interference of other wireless devices, microwaves, fluorescent lights, etc., are placed nearby.

–

There are floors or walls between the wireless router and TV.

–

If the problems continue even after checking the above, try making a wired LAN connection.

Cannot use the wireless connection.

●

Check if the Wireless LAN Access Point (AP) (e.g. wireless router) is oriented properly or not placed too close between them.

●

Once you have activated the wireless connection please wait 30 seconds for the connection to be established after Turning On the Unit, before trying to access network features such as Net TV.

Cannot use Netflix feature.

●

Check if the network connection is properly made.

●

Visit http://www.netflix.com on your PC and become a Netflix member.

●

Some network services may not be available in your country.

Cannot add movies or TV episodes to the Instant Queue.

●

Visit www.netflix.com on your PC.

Even though the speed of the Internet connection improves during playback, the picture quality of Netflix streaming movie does not improve.

●

The picture quality does not change during playback. It differs depending on the speed of Internet connection at the time of loading.

Cannot use VUDU feature.

●

VUDU is available only in the United States.

●

Check if the network connection is properly made.

Cannot rent or buy movies / TV episodes on VUDU.

●

You need to activate the VUDU account. For detailed information, please visit the service providers website at http://www.vudu.com

●

Log into your account at http://my.vudu.com and check your payment information.

The picture quality of a streaming movie (Netflix or VUDU) is poor.

●

Check the speed of your Internet connection. You need speeds of at least 8 Mbps to this player for high quality uninterrupted playback.

Streaming movie (Netflix or VUDU) often stops or starts buffering during playback.

●

Contact your Internet service provider to troubleshoot your Internet connection for speed and line quality. Consistent line quality and speed are very important for Internet video playback.

Cannot connect to the network while my PC is connected to the network.

●

Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting at the same time.

Cannot use Easy Connect (WPS) to connect to the Access Point.

●

Connect the Unit to the Access Point using Scan or Manual entry mode. If the Access Point’s security mode is set to WEP*, change the setting to WPA or WPA2 (recommended), then try Easy connect (WPS) again. (For Access Point configuration, please consult its user manual or manufacturer.)

* WEP is not recommended to be used due to its Major security flaws. Change the

Security protocol on the wireless router to WPA or WPA2 (recommended) mode.

Folder or files stored on DLNA home media server are not displayed in the file list or cannot be played back.

●

Check the setting on your home media server. (Refer to the user manual of the home media server.)

●

Check the network connection and settings.

Cannot use Pandora feature.

●

Check if the network connection is properly made.

●

Pandora is available only in the United States.

●

You must create a Pandora account and activate this Unit. Activating

Pandora L p. 51

Cannot get into the PC's screen even the Philips Wirelessconnect is launched.

●

Make sure if the network connection is connected properly.

●

Check if your PC runs Philips Wirelessconnect.

●

Make sure your TV and PC are connected on the same network.

I have a 1.8GHz CPU but Wirelessconnect does not work on my PC.

●

For smooth operation of your PC while Philips Wirelessconnect is running you need a mainstream dual core processor from IntelN or AMD.

IntelN : Core™ 2 Duo or Core™ i3/5/7 @ 1.8GHz or higher. AMD : Athlon™ II X2, Turion™ II Dual-Core or Phenom™ X2 @ 2GHz

or higher.

Note(s)

●

The LCD screen is manufactured to provide many years of useful life. Occasionally a few or red. This is not to be considered a defect in the LCD screen.

●

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this User Manual for more details on correct operations.

non active pixels may appear as a fixed point of blue, green

7 Information

55 .English

Glossary

Analog TV (NTSC)

Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards. Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA.

ARC (Audio Return Channel) (HDMI 1 only)

Aspect ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, 16:9 (the TV screen is almost twice as wide as its height).

CEC (Consumer Electronics Control)

This allows you to operate the linked functions between our brand devices with CEC feature and this Unit. We Do Not guarantee 100% interoperability with other brands of CEC compliant devices.

Component Video

This is a Video signal format that conveys each of 3 principal colors of light (red, blue and to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress Digital sound. It offers Stereo Sound (2ch) or multi-channel Audio.

DTS TruSurround™

Enable DTS TruSurround™ to enhance your audio experience.

DTV (ATSC)

Abbreviation that stands for Advanced Television Systems Committee and the name of the Digital broadcasting standards.

E-sticker

E-sticker is showing set features, technical information, etc on this TV set that is displayed the information was on a printed sticker that was put on the display.

HDMI (High-Definition Multimedia Interface)

Interface that supports All uncompressed, Digital Audio / Video formats including Set-top Box, Blu-ray / DVD Recorder or Digital television, over a single cable.

HDTV (High Definition TV)

Ultimate Digital format that produces high resolution and high picture quality.

PIN code

A stored 4-digit number that allows access to Parental control features.

SAP (Secondary Audio Program)

Second-Audio channel delivered separately from the Main-Audio channel. This Audio channel is used as an alternate in bilingual broadcasting.

SDTV (Standard Definition TV)

Standard Digital format that is similar to the Analog TV picture quality.

TV is connected to the device using an HDMI cable attached

the TV screen is almost square); widescreen models are

green) through different signal lines. This allows the viewers

on the TV screen mainly used by TV retailers. Previously

Maintenance

Cabinet Cleaning

●

Wipe the front cloth.

●

Never use a solvent or alcohol. Do Not spray insecticide liquid near the Unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the Unit with a soft cloth. Before cleaning the panel, disconnect the AC Power Cord.

Servicing

Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Call our toll free customer support line found on the cover of this User Manual to locate an authorized service center.

IR Signal Check

If the Remote Control is not working properly, you can use a Digital or Cell Phone Camera to see if it is sending out an infrared signal.

Note: Some Cameras have an IR Filter and will not Display the IR signal.

panel and other exterior surfaces of the Unit with a soft

e.g.) With a Digital Camera: Point the Digital Camera towards the Remote Control infrared diode at the front of the Remote Remote Control and look at the Camera Display. If an infrared pulsating light appears on the Display, the Remote Control is sending out an IR signal.

Control. Press any key on the

8 Specifications

Model

5PFL4909

5PFL4609

0PFL4909

49PFL4909

49PFL4609

43PFL4909

43PFL4609

40PFL4909

40PFL4609

32PFL4909

32PFL4609

28PFL4909

28PFL4609

Pictur

ype

(1920 x 1080 pixels 120Hz)

HD (1920 x 1080 pixels 60Hz)

WXGA (1366 x 768 pixels 60Hz)

Diagonal screen size /

spect ratio

64.5”/ 16:

54.6”/ 16:

49.5”/ 16:

48.5”/ 16:

43.0”/ 16 :

9.5”/ 16:

1.5”/ 16:

27.5”/ 16:

Viewing angles

176° (V) by 176° (H)

178° (V) by 178° (H)

76° (V) by

76° (H)

78° (V) by 178° (H)

176° (V) by 176° (H)

178° (V) by 178° (H)

Built-in Digital / Analog tuner

ATSC (Digital) / NTSC (Analog)

Soun

Mono / Stereo Mono, Stereo, DTS TruSurround

™

Power Output

(

RMS watts)

10W x 2 8W x 2

Equalizer

5 band

Ease of us

Picture

orma

(

4:3 Source)

Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen

(

16:9 Source)

Automatic / 4:3 / Wide screen / Unscale

utomatic / 4:3 /

Wide screen / Full

HDMI AV

(

4:3 Source)

Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen

HDMI AV

(

16:9 Source)

Automatic / 4:3 / Wide screen / Unscale

utomatic / 4:3 /

Wide screen / Full

C Source 4:3 / Wide screen / Unscaled (Refer to HDMI AV (16:9 Source) above if PC has HDMI Output.)

Photo Slide sho

JPEG files only

MP3 playback MP3 files only Video playback MPEG1 (.mpg / .mpeg), MPEG2 (.mpg / .mpeg / .vob), H.264 (.mp4), MPEG4 SP/ASP (.avi), MPEG4 (.mp4)

hannel

Channel coverage

Terrestrial DTV (ATSC)

HF: 2~1

HF: 14~69 (each channel has e.g. 2.1~2.9, 3.1~3.9, etc)

Terrestrial Analog (NTSC)

HF: 2~1

HF: 14~6

CATV (Analog NTSC)

2~13

A~W

W+1~W+94 (analog W+1~W+84), A-5~A-1, 5A

uning system

hannel frequency synthesized tuning system

hannel acces

Direct access number keyboard, Programmable Scan, Channel +(up) / -(down) and PREV. CH (Previous Channel)

onnectivit

omponent Video Input

(

Y/Pb/Pr)

Supporting video signals : 480i/p, 720p, 1080i/p @60Hz

omposite Video Input

(

shared Y green terminal

with Component Video)

HDMI I

nput

Supporting video signals : 480i/p, 720p, 1080i/p, @24Hz-60Hz HDMI ARC (HDMI 1 only)

PC-Input signal up to FHD (1920 x 1080)

PC-Input signal up to WXGA (1360 x 768)

Audio L/R Inpu

PC Input via VGA, HDMI and HDMI-DVI + Analog Audio L/R USB

Wireless LAN Supporting wireless standards : IEEE 802.11 b/g/n (2.4GHz)

Eth

ernet port

Digital Audio Output

1 Supporting Dolby Digital

Headphone Output

/8 inch (3.5mm)

ower

ower requirements

20V~ +/− 10%, 60Hz +/− 0.5

emperatur

perating temperature 41 °F (5 °C) to 104 °F (40 °C)

56 .English

●

Specifications are Subject to Change without Prior Notice.

9 Warranty

PHILIPS LIMITED WARRANTY

ONE (1) YEAR

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth below.

WHO IS COVERED:

Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period. At its option, Philips will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory, or (3) refund the original purchase price of the product. Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the

original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Philips’ property. When a refund is given, your product becomes Philips’ property.

Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:

This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.

Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than Philips or Philips Authorized Service Location, (c) to a product

a part that has been modified without the written permission of

Philips, or (d) if any Philips serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product to Philips.

• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of Philips.

• Damage or claims for products not being available for use, or for lost data or lost software.

• Damage from mishandled shipments or transit accidents when returning product to Philips.

• A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of

products damaged by these modifications.

• A product used for commercial or institutional purposes (including but not limited to rental purposes).

• Product lost in shipment and no signature verification receipt can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA, PUERTO RICO, OR U.S. VIRGIN ISLANDS…

Contact Philips Customer Care Center at:

1-866-226-1568

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Funai Service Corporation, 2425 Spiegel Drive, Groveport, OH 43125, USA

57 .English

License

Funai Corporation, Inc. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source code such offer is requested by the respective licenses. This offer is valid up to three years after the product purchase to anyone in receipt of this information. To obtain source code, please contact Funai Corporation, Inc. You should write to “Funai Service Corporation OSS Request, 2425 Spiegel Drive, Groveport, OH 43125, USA. Funai Corporation, Inc. disclaims any and all warranties and representations with respect to such software and related source code including quality, reliability, usability, and accuracy, and further disclaim all express, implied, statutory or otherwise, including without limitation, any implied warranties of title, noninfringement, merchantability, or fitness for a particular purpose. Funai Corporation, Inc. shall not be liable to make any corrections to the open source software or source code or to provide any support or assistance with respect to it. Funai Corporation, Inc. disclaims any and all liability arising out of or in connection with the use of this software and/or source code.

packages, on an “AS IS” basis, used in this product for which

58 .English

Funai Corporation, Inc.

12489 Lakeland Road, Santa Fe Springs, CA 90670, USA

Philips and Philips Shield are used under license of Koninklijke Philips N.V.

A4D8AUH/A4DR2UH/A4DRBUH/A4DREUH/A4DU2UH/A4DUEUH/

A4D17UH/A4D1EUH/A4D1BUH/A4D1FUH/A4DV2UH/A4DVAUH/

A4DP2UT/A4DPCUT/A4DPFUT/A4DPAUT/A4DPDUT/A4DPGUT/

A4D2BUT/A4DF2UT/A4DFAUT/A4DS2UT

☆

Philips 32PFL4609/F7, 55PFL4609/F7 user manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Important Safety Instructions

Positioning the TV

Environmental Care

Regulatory Notices

Preparing to Move / Ship the Unit

Features

Supplied Accessories

Symbols used in this User Manual

Stand Assembly

Attaching the Base

Managing Cables

Installing the Remote Control Batteries

Remote Control

Control Panel

Terminals

Connecting Antenna or Cable / Satellite / IPTV Box

Connecting a Cable / Satellite / IPTV Box, Blu-ray Disc / DVD Recorder via Composite Connectors and Analog Audio

Plugging in the AC Power Cord

Selecting your Connection quality

HDMI - Highest quality

Connecting your Devices

HDMI Digital Connection

HDMI-DVI Connection

Component (Y Pb Pr) - High quality

Composite - Basic quality

HDMI-ARC Connection

Component Analog Video Connection

Composite Analog Video Connection

Connecting the TV to the Internet using an Ethernet cable

Connecting the TV to the Internet using a Wireless LAN

PC Connection

Digital Audio Output Connection

USB Memory Stick

Initial Setup

Switching on your TV and putting it in Standby mode

Switching Channels

Adjusting Volume

Watching Channels from an External Device

Lock or unlock your device from the Home menu

Enable or disable RC key forwarding from the Home menu

Guide to Home menu

Create and use lists of favorite channels

Select a list of favorite channels

Create or edit a list of favorite channels

Switch to one of the channels on a list

Changing Picture Format

TV Screen information

Picture (JPEG)

Music (MP3)

Video

Picture

Settings assistant

Sound

Caption settings

Features

Sleep timer

Child and Ratings Lock

Change PIN

Installation

Language

Channel installation

Preferences

Use Philips EasyLink

Network

Software

Return your settings to default values

Checking your current software version

Preparing for the software upgrade

Upgrading the software

Netflix ESN

VUDU deactivation

YouTube deactivation

Automatically check for latest software

Netflix deactivation

License

Philips Wirelessconnect