Philips 40PFK5709, 32PFS5709, 32PFK5709, 40PFS5709, 48PFK5709 User Manual

...
Register your product and get support at Smart LED TV
www.philips.com/welcome
32PFK5709 32PFS5709 40PFK5709 40PFS5709 48PFK5709 48PFS5709 55PFK5709 55PFS5709
User Manual

Contents

1 My new TV 4
1.1 Smart TV 4
1.2 App gallery 4
1.3 Rental videos 4
1.4 Social networks 4
1.5 Skype 4
1.6 Smartphones and tablets 4
1.7 Pause TV and recordings 5
1.8 EasyLink 5
2 Setting up 6
2.1 Read safety 6
2.2 TV stand and wall mounting 6
2.3 Tips on placement 6
2.4 Power cable 6
2.5 Antenna cable 6
2.6 Satellite dish 7
3 Network 8
3.1 Wireless network 8
3.2 Wired network 9
3.3 Network settings 9
4 Connections 11
4.1 Tips on connections 11
4.2 EasyLink HDMI CEC 12
4.3 Common interface - CAM 13
4.4 Set-top box - STB 14
4.5 Satellite receiver 14
4.6 Home Theatre System - HTS 14
4.7 Blu-ray Disc player 16
4.8 DVD player 16
4.9 Game console 16
4.10 USB Hard Drive 17
4.11 USB keyboard or mouse 18
4.12 USB flash drive 19
4.13 Photo camera 19
4.14 Camcorder 19
4.15 Computer 20
4.16 Headphones 20
5 Switch on 22
5.1 On or Standby 22
5.2 Keys on TV 22
6 Remote control 23
6.1 Key overview 23
6.2 IR sensor for non-RF remote control 24
6.3 Batteries 24
6.4 Cleaning 24
7 TV channels 25
7.1 Watching TV channels 25
7.2 Channel installation 30
8 Satellite channels 34
8.1 Watching satellite channels 34
8.2 Satellite channel list 34
8.3 Favourite satellite channels 34
8.4 Lock satellite channels 35
8.5 Satellite installation 36
8.6 Problems with satellites 40
9 Home menu 41 10 TV guide 42
10.1 What you need 42
10.2 Using the TV guide 42
10.3 Recordings 42
11 Sources 43
11.1 Sources list 43
11.2 From standby 43
11.3 EasyLink 43
12 Timers and clock 44
12.1 Sleeptimer 44
12.2 Clock 44
12.3 Switch off timer 44
13 Games 45
13.1 Play a game 45
13.2 Two-player games 45
14 Your photos, videos and music 46
14.1 From a USB connection or network computer 46
14.2 Wi-Fi Miracast 47
15 Pause TV 49 16 Recording 50
16.1 What you need 50
16.2 Record a programme 50
16.3 Watch a recording 50
17 Skype 52
17.1 About Skype 52
17.2 What you need 52
17.3 Start with Skype 52
17.4 Skype menu 53
17.5 My profile 53
17.6 People 54
17.7 Calling on Skype 55
17.8 Skype credit 56
17.9 Skype settings 56
17.10 Sign out 58
17.11 Quit Skype 58
17.12 Terms of use & Privacy Policy 58
18 Smart TV 59
18.1 About Smart TV 59
18.2 What you need 59
18.3 Setup Smart TV 59
18.4 Smart TV Apps 59
18.5 Multi view 61
18.6 Reset Smart TV 61
19 Multi room 62
19.1 About Multi room 62
19.2 What you need 62
19.3 Using Multi room 62
2
20 Settings 63
20.1 Setup menu 63
20.2 Picture 64
20.3 Sound 67
20.4 Universal access 70
21 Specifications 72
21.1 Environmental 72
21.2 Reception for non-satellite TVs 72
21.3 Reception for satellite TVs 73
21.4 Display 73
21.5 Power 73
21.6 Dimensions and weights (5709 series) 73
21.7 Connectivity 74
21.8 Multimedia 74
22 Software 75
22.1 Software update 75
22.2 Software version 75
22.3 Open source software 75
22.4 Open source license 75
23 Troubleshooting and support 81
23.1 Troubleshooting 81
23.2 Register 82
23.3 Help 82
23.4 Online help 82
23.5 Consumer Care / Repair 82
24 Safety and care 84
24.1 Safety 84
24.2 Screen care 85
25 Terms of use, copyrights and licenses 86
25.1 Terms of use 86
25.2 Copyrights and licenses 86
Index 89
3
1
Start Smart TV and add the video store App to the Smart TV start page.
My new TV
1.1
Smart TV
Connect this a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.
With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the TV with your tablet.
With your TV connected to the Internet, you can watch a rental video from an online video store, read the online TV guide or record your favourite TV show on a USB Hard Drive.
The Smart TV Apps add to the fun with all sorts of entertainment and convenient services.
In
Help
information.
1.2
Philips Smart LED TV
, press 
Keywords
to the Internet and discover
and look up
Smart TV
for more
Open the video store App, create your personal account, select the movie and press play. No fuss with downloading, you can watch the movie immediately*.
In
, press 
Help
more information. * Depending on the video streaming service of the selected
video store.
1.4
Keywords
and look up
Rental videos
for
Social networks
No need to get up to check your friend's messages on your computer. Open Smart TV, select your message back from your couch.
social network
page and send a
App gallery
Open the collection of tailored websites for TV.
Find the App for YouTube videos, a national newspaper, an online photo album, Facebook, Twitter, etc.
There are Apps to rent a video from an online video store and Apps for watching programmes you missed.
If the App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV.
In
Help
information.
1.3
App gallery
, press 
in Smart TV to browse the Apps, the
Keywords
and look up
App gallery
for more
Rental videos
To watch a Simply rent the latest movie from your regional online video store.
rental video
, you don't need to leave your home.
Smart TV supports the popular social networks Facebook and Twitter.
In information.
1.5
Help
, press 
Keywords
and look up
App gallery
for more
Skype
With
Skype™
you can make video calls on your TV for free.
You can call and see your friends from anywhere in the world. To make a video call, you need a camera with a built-in microphone and a good connection to the Internet. Some Philips TVs have a camera and microphone built in.
In
4
, press 
Help
information.
Keywords
and look up
Skype
for more
1.6
1.8
Smartphones and tablets
To use your smartphone or tablet as a TV remote control or as your media controller, download the from your smartphone or tablet app store.
Operate your TV from your smartphone or tablet, switch channels or change the volume. With the MyRemote app, you can use your phone or tablet to send photos, music or videos from your computer to your TV. And with MyRemote app on a tablet, you can call up the TV guide, read about the programmes and switch the TV to a channel with a simple tap of your finger. The MyRemote app is available for iOS and Android.
In
, press 
Help
more information.
Keywords
and look up
Philips MyRemote
MyRemote app
app
for
EasyLink
With
EasyLink
Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected
devices.
In
Help
information.
you can operate a connected device, like a Bluray
, press 
Keywords
and look up
EasyLink
for more
1.7
Pause TV and recordings
If you connect a broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or simply take a break during a sports match, while the TV stores the broadcast on the USB Hard Drive. You can start watching again later. With a USB Hard Drive connected, you can also record digital broadcasts. You can record while you are watching a programme or schedule a recording of an upcoming programme.
USB Hard Drive
, you can pause and record a
In
, press 
Help
Recording
Keywords
for more information.
and look up
Pause TV
or
5
2
Setting up
TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
2.1
Read safety
Read the safety instructions first before you use the TV. In Help, go to
2.2
Safety and care
>
Safety
.
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.
Use the product type number of the TV to look for the Quick Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
To fix the bracket securely, use screws with a length indicated in the drawing.
2.3
Tips on placement
• Position the TV where light does not shine directly on the screen.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.
2.4
Power cable
• Insert the power cable into the back of the TV.
• Make sure the power cable is securely inserted in the connector.
• Make sure that the power plug, in the wall socket, is accessible at all times.
• When you unplug the power cable, always pull the plug, never pull the cable.
POWER
connector on the
• For 5909 series 65-inch TV VESA MIS-F 400x400, M6
• For 5709 series 55-inch TV VESA MIS-F 400x400, M6
• For 5709 series 32-inch/40-inch/48-inch TV VESA MIS-F 400x200, M6
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV's weight. Also read the safety precautions before positioning the TV.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
In
, press 
Help
information on switching the TV on or off.
6
Keywords
and look up Switching on for more
2.5
Antenna cable
Insert the antenna plug firmly into the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C input signals.
2.6
ANTENNA
socket at the
Satellite dish
Attach the satellite F-type connector to the satellite connection
at the back of the TV.
SAT
7
3
Network
3.1
Wireless network
What you need
To connect the TV wirelessly to the Internet, you need a wireless router. Use a high-speed (broadband) connection to the Internet..
Network devices
The TV can connect to other devices in your wireless network, like your computer or smartphone. You can use a computer with Microsoft Windows or Apple OS X.
File sharing
On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*, Windows Media Player 11, Twonky™ or similar.
Install the media server software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV. * You can download the Philips MediaManager software from the Philips support site www.philips.com/support
Make the connection
Follow steps 1 to 5.
- Make sure that the router of your wireless network is
Step 1
switched on.
- Press  and select
Step 2
- Select
Step 3
- Select
Step 4
- Select
Step 5
- Select
Step 6
have a router with WPS (Wi-Fi Protected Setup), you can select
. Select your choice and press OK.
WPS
Connect to network
Connect
Wireless Scan
and press OK.
and press OK.
to scan for your wireless network. If you
and press OK.
Setup
and press OK.
Scan
Select router). The TV might find several wireless networks in your proximity.
WPS
If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press the connection. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS. If you must use the instead of WPS.
Step 7
network and press OK. If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select
Step 8
your encryption key (WEP, WPA or WPA2). If you entered the encryption key for this network before, you can select make the connection immediately. If your router supports WPS or WPS PIN, you select
WPS PIN
Standard
Select passphrase or security key) manually.You can use the keyboard on the RC to enter the encryption key. Once you have entered the key, press
WPS PIN
To make a secured WPS connection with a PIN code, select
WPS PIN
shown and enter it in the router software on your PC. Return to the TV and press to enter the PIN code in the router software.
Step 9
successful.
Network configuration
If the connection fails, you can check the DHCP setting of the router. DHCP should be set to On. Alternatively, if you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP. To set the TV to Static IP, press  and select
OK configuration
you can set the IP address and other necessary settings in
IP configuration
to scan for your wireless network (your wireless
Scan
Connect
WPS PIN code
- In the list of networks found, select your wireless
Manual entry
- Depending on the type of router, you can now enter
or
Standard
and press OK. Write down the 8-digit PIN code
- A message will be shown when the connection is
to enter the network name yourself.
Standard
Connect
. Select your choice and press OK.
to enter the encryption key (password,
.
Connect
. Consult the router manual on where
to connect, select
Scan
WPS
and press
Setup
. Select
Network settings
>
Static IP
in the same menu.
>
Network settings
. With Static IP selected in the menu,
>
Network
to make
to
Next
,
Static
8
Network problems
Connect the router
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network.
• Make sure that the firewalls in your network allow access to the TV's wireless connection.
• If the wireless network does not work properly in your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality.
• Use a high-speed (broadband) Internet connection for your router.
3.2
Wired network
What you need
To connect and setup the router follow steps 1 to 5. 1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on. 3 - Press  and select 4 - Select 5 - Select
The TV constantly searches for the network connection. A message will be shown when the connection is successful.
Network configuration
If the connection fails, you can check the DHCP setting of the router. DHCP should be set to On. Alternatively, if you are an advanced user and want to install your network with static IP addressing, set the TV to Static IP. To set the TV to Static IP, press  and select press OK. Select
configuration
you can set the IP address and other necessary settings in
IP configuration
**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.
Connect to network
and press OK.
Wired
Network settings
>
Static IP
in the same menu.
and press OK.
Setup
and press OK.
and
Setup
>
Network settings
. With Static IP selected in the menu,
>
Network
Static
You need a network Use a router with a high-speed (broadband) connection to the Internet.
File sharing
On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*, Windows Media Player 11, Twonky™ or similar. Install the media server software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV. * You can download the Philips MediaManager software from the Philips support site www.philips.com/support
In
Help
software, supported
software.
, press
Keywords
to connect the TV to the Internet.
router
and look up
for an overview of supported media server
Media server
3.3
Network settings
To open the Network settings . . .
1 - Press  and select 2 - Select
View network settings
All current network settings are shown here. The IP and MAC address, signal strength, speed, encryption method, etc.
Network settings
- Network type
Sets the network to Wired or Wireless.
- Network configuration
Sets the network configuration to DHCP or Static IP.
Wi-Fi media playback
To receive multimedia files from smartphones or tablets, set the DMR to On.
Static IP configuration
If Static IP is selected in Network Settings menu, you can set all necessary static IP settings here.
Wi-Fi Miracast
Network settings
and press OK.
Setup
and press OK.
9
For more information on Wi-Fi Miracast, press
Keywords
Reset Wi-Fi Miracast group
and look up
Wi-Fi Miracast™
.
Clear the list of connected and blocked devices that are used with Miracast.
Wi-Fi smart screen
For more information on Wi-Fi smart screen, press
Keywords
TV network name
and look up
Wi-Fi smart screen
.
If you have more than one TV in your network, you can rename the TVs here.
Netflix Settings
Adjust Netflix settings.
Clear Internet memory
With Clear Internet memory, you can clear all Internet files stored on your TV. You clear your Philips Smart TV registration and parental rating settings, your video store app logins, all Smart TV app favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
10
4
Connections
4.1
Tips on connections
If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. For more information on using EasyLink, press and look up
EasyLink CEC
.
Keywords
Connectivity guide
Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
Go to
www.connectivityguide.philips.com
Antenna
If you have a Set-top box (a digital receiver) or Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or Recorder first before it enters the TV. In this way, the antenna and the Set-top box can send possible additional channels to the Recorder to record.
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to AUDIO IN for sound, on the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management).
HDMI ARC
All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel). If the device, typically a Home Theatre Sysytem (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals. You can use any HDMI connection on this TV to connect the HTS but ARC is only available for 1 device/connection at a time.
HDMI
HDMI CEC
An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) or Ultra HD (UHD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.
EasyLink HDMI CEC
In case you prefer to switch off ARC on the HDMI connections, press  and select Select
TV settings
Setup
>
Sound
and press OK.
>
Advanced
>
HDMI ARC
.
Y Pb Pr - Audio L R
Y Pb Pr - Component Video is a high quality connection. The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
11
• Only for TVs with component connectors.
CVBS - Audio L R
CVBS - Composite Video is a high quality connection. Next to the CVBS signal adds the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In ­Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System. For more information, press
Out settings
.
Keywords
and look up
Audio
• Only for TVs with component/composite connectors.
Scart
SCART is a good quality connection. The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals.
Use the SCART adapter cable to connect your device.
If the sound does not match the video on screen, you can adjust the audio to video synchronisation. For more information, press
to video sync
4.2
.
Keywords
and look up
Audio
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
12
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink.
Example HDMI CEC branding names are property of their respective owners.
caused by interference with the TV processing, the picture processing of these devices should be disabled. The TV comes with Pixel Plus Link switched on and disables the picture quality processing of recent Philips devices connected to the TV. To switch off Pixel Plus Link, in the EasyLink settings menu, select
Pixel Plus Link
and select
Off
.
Operate devices
To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press an HDMI connection and press OK.
Once the device is selected, the TV remote control can control the device. However  and  other TV keys are not forwarded to the device. If the key you need is not on the TV remote control, you can select the key in the Options menu. Press  the screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu.
Note: Only devices that support function will respond to the TV remote control.
OPTIONS
SOURCES
and select
, select a device connected to
OPTIONS
Controls
EasyLink remote control
keys and some
in the menu bar. On
EasyLink settings
The TV comes with all EasyLink settings switched on. You can switch off any EasyLink setting independently.
EasyLink
To switch off EasyLink completely . . .
1 - Press  and select 2 - Select
OK.
3 - Select 4 - Press , repeatedly if necessary, to close the menu.
EasyLink Remote Control
TV settings
and press OK.
Off
and press OK.
Setup
>
General settings
>
EasyLink, and press
Auto subtitle shift
If you play a DVD or Blu-ray Disc on a Philips disc player that supports subtitles, the TV can move the subtitles upwards. Subtitles will be visible whatever Picture format you select. The TV comes with Auto subtitle shift switched on. To switch off Auto subtitle shift, in the EasyLink settings menu, select
Auto subtitle shift
Auto switch off devices
You can set the TV to switch off the connecting HDMI-CEC compliant devices if they are not the active source. The TV switches the connected device to standby after 10 minutes of inactivity.
4.3
and select
Off
.
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes, like movies
and sports, offered by digital TV broadcasters in your region. These programmes are scrambled by the TV broadcaster and descrambled with a prepaid CI+ module. Digital TV broadcasters provide this CI+ module (Conditional Access Module - CAM) when you subscribe to their premium programmes. These programmes have a high level of copy protection.
Contact a digital TV broadcaster for more information on terms & conditions.
For more information on connecting a CAM module, press
Keywords
and look up
Common Interface CAM
.
If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately. In the EasyLink settings menu, select and select
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might have their own picture quality processing. To avoid bad picture quality
Off
.
EasyLink remote control
CAM
Insert a CAM module
Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.
13
Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.
Use the Common Interface slot on the TV to insert the CAM card. With the front of the card facing towards you, gently insert the CAM as far as it will go. Leave the card in the slot permanently.
It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV. If a CAM is inserted and subscription fees are paid, (connection methods can differ), you can watch the TV broadcast. The inserted CAM is exclusively for your TV.
CAM settings
To set passwords or PIN codes for the CAM TV broadcast, press  and select Select Select the CAM TV broadcaster and press OK.
4.4
Setup
Channel settings
and press OK.
>
Common Interface
.
Set-top box - STB
To switch off the Switch off timer, press  and select press OK. Select
TV settings
set the slider bar to
4.5
>
General settings
.
Off
>
Switch off timer
Setup
and
and
Satellite receiver
Connect the dish antenna cable to
the Satellite receiver.
Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV. Alternatively, you can use a SCART cable if the Set-top box has no HDMI connection.
Next to the antenna connection, add an HDMI cable to connect the device to the TV. Alternatively, you can use a SCART cable if the device has no HDMI connection.
Switch off timer
Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.
To switch off the Switch off timer, press  and select press OK. Select
TV settings
set the slider bar to
>
General settings
.
Off
>
Switch off timer
Setup
and
and
Switch off timer
14
4.6
Home Theatre System - HTS
Audio Out settings
Audio Out delay
Connect HTS
Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable if the device has no HDMI connection.
HDMI ARC
If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you have connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection.
With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio to video sync is done automatically synchronised and always correct.
Audio sync delay
For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to the video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to switch off Audio out delay on the TV.
To switch off the Audio Out delay . . .
1 - Press  and select 2 - Select 3 - Select 4 - Press , repeatedly if necessary, to close the menu.
TV settings
and press OK.
Off
Setup
>
and press OK.
>
Sound
Advanced
>
Audio out delay
.
If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you can set a delay on most Home Theatre Systems with a disc player to match the sound with the video.
For more information, press
to video sync
.
Keywords
and look up
Audio
Audio Out offset
If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms. The Audio Out delay setting should be switched on.
To synchronise the sound on the TV . . .
1 - Press  and select 2 - Select 3 - Use the slider bar to set the sound offset and press OK. 4 - Press , repeatedly if necessary, to close the menu.
Audio Out format
If you have a Home Theatre System (HTS) with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System. If you have a Home Theatre System without multichannel sound processing, select Stereo.
To set the Audio out format . . .
TV settings
Setup
>
Sound
and press OK.
>
Advanced
>
Audio out offset
.
1 - Press  and select 2 - Select
15
TV settings
Setup
>
Sound
and press OK.
>
Advanced
>
Audio out
.
format
3 - Select 4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out levelling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing.
To level the difference in volume . . .
1 - Press  and select 2 - Select
levelling
3 - If the volume difference is large, select difference is small, select 4 - Press , repeatedly if necessary, to close the menu.
Audio Out levelling affects both the Audio Out - Optical and HDMI ARC sound signals.
Multichannel
TV settings
.
or
Setup
>
Stereo
Sound
Less
.
and press OK.
>
Advanced
.
>
Audio out
. If the volume
More
Problems with HTS sound
If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.
For more information on EasyLink, press up
EasyLink HDMI CEC
4.8
.
Keywords
and look
DVD player
Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable, if the device has no HDMI connection.
Setup
.
Setup
.
Stereo
>
TV settings
setting on the TV is switched On.
>
TV settings
>
>
Sound
Sound
>
HDMI ARC
>
Audio
Advanced
Advanced
Sound with loud noise
If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing. You can fix this by setting the
out format
Press  and select
Audio out format
No sound
If you cannot hear the sound from the TV on your Home Theatre System, check the following . . .
• Check if you connected the HDMI cable to an connection on the Home Theatre System. All HDMI connections on the TV are HDMI ARC connections.
• Check if the Press  and select
HDMI ARC
4.7
of the TV to
HDMI ARC
.
Blu-ray Disc player
>
>
If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control.
For more information on EasyLink, press look up
4.9
EasyLink HDMI CEC
.
Keywords
and
Game console
HDMI
For best quality, connect the game console with an High speed HDMI cable to the TV
Use a
High speed HDMI
player to the TV.
cable to connect the Blu-ray Disc
16
Y Pb Pr - Audio L R
CVBS - Audio L R
Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV.
Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
CVBS - Audio L R / Scart
Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV.
If your game console only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.10
USB Hard Drive
What you need
If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar).
To pause
To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 32GB disk space.
To record
To pause and record a broadcast, you need a minimum of 250GB disk space.
Note: the CVBS to SCART Adapter is not provided in the TV set.
TV guide
Before you decide to buy a USB Hard Drive to record, you can check if it is possible to record digital TV channels in your country. Press button on the TV guide page, you can record.
For more information on how to install a USB Hard Drive, press
17
TV GUIDE
Keywords
on the remote control. If there is a Record
and look up
USB Hard Drive, installation
.
Installation
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. Formatting removes all files from the USB Hard Drive.
1 - Connect the USB Hard Drive to one of the connections on the TV. Do not connect another USB device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel, press
(Pause). Trying to pause will start the formatting. Follow the instructions on screen. When the USB Hard Drive is formatted, leave it connected
permanently.
or
Recording
Keywords
.
Warning
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
For more information, press
TV
USB
and look up
Pause
Install the keyboard
To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. If you select a Cyrillic or Greek keyboard lay-out first, you can select a secondary Latin keyboard lay-out.
To change the keyboard lay-out setting when a lay-out was selected…
1 - Press  and select 2 - Select
settings Keys for channel renaming
• Enter key = OK
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard lay-outs, if a secondary lay-out is set, press the
Keys for Smart TV Apps and Internet pages
• Shift + Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
• * = fit the web page to the screen width.
TV settings
and press OK.
Setup
>
Ctrl + Shift
connections on the TV. When
USB
and press OK.
General settings
>
keys simultaneously.
USB keyboard
USB mouse
Connect USB mouse
You can connect a USB mouse (USB-HID type) to navigate pages on the Internet.
4.11
USB keyboard or mouse
USB keyboard
Connect a USB keyboard (USB-HID type) to enter text on your TV.
You can connect a keyboard and a mouse to the TV. Use one of the
connections to connect.
USB
On an Internet page, you can select and click on links more easily.
OK
Back
Connect the mouse
Switch the TV on and connect the USB mouse to one of the
connections on the TV. You can also connect the USB
USB
mouse to a connected USB keyboard.
Mouse clicks
• Left click =
• Right click =
18
You can use the scroll wheel to scroll pages up and down. For more information on how to connect a keyboard,
press
Keywords
Mouse speed
You can adjust the speed of the mouse moving on screen.
and look up
USB keyboard
.
To adjust the speed . . .
1 - Press  and select 2 - Select 3 - Select
press OK. 4 - Press the arrows  (up) or  (down) to increase or lower the speed.
5 - Press OK to store and close the setting. 6 - Press , repeatedly if necessary, to close the menu.
4.12
TV settings General settings
and press OK.
Setup
and press OK.
>
Pointer / Mouse settings
and
USB flash drive
You can view photos or play your music and videos from a connected USB flash drive.
Insert a USB flash drive in one of the TV while the TV is switched on.
connections on the
USB
If the contents list does not appear automatically, press
SOURCE
Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.
For more information on viewing photos, press
Keywords
Ultra HD on USB
You can view photos in Ultra HD resolution from a connected USB device or flash drive. The TV will downscale the resolution to Ultra HD if the resolution of the photo is higher. You cannot play a native Ultra HD video on any of the USB connections.
4.14
, select
and look up
and press OK.
USB
Your photos, videos and music
.
Camcorder
HDMI
The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press
SOURCE
To stop watching the USB flash drive content, press select another activity. To disconnect the USB flash drive, you can pull out the flash drive anytime.
For more information on watching or playing content from a USB flash drive, press
videos and music
4.13
, select
and press OK.
USB
Keywords
.
and look up
EXIT
Your photos,
Photo camera
To view photos stored on your digital photo camera, you can connect the camera directly to the TV.
Use one of the on the camera after you made the connection.
connections on the TV to connect. Switch
USB
For best quality, use an HDMI cable to connect the camcorder to the TV.
or
CVBS - Audio L R / Scart
You can use an HDMI, YPbPr or SCART connection to connect your camcorder. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection.
Note: the CVBS to Scart Adaptor is not provided in the TV set.
19
CVBS - Audio L R
Use a Video Audio L/R cable to connect the camcorder to the TV.
the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV.
Settings
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.15
Computer
Connect
You can connect your computer to the TV and use the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the TV.
Ideal monitor setting
If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically.
If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.
To set the TV to the ideal setting manually . . .
1 - Press  and select 2 - Select
style
3 - Select a movie) and press OK. 4 - Press , repeatedly if necessary, to close the menu.
Remember to set the Game or computer setting back to
4.16
TV settings
and press OK.
Game
Computer
when you stop playing the game.
and press
Setup
>
(for gaming) or select
Picture
>
Advanced
OK.
>
Computer
Activity
(for watching
Headphones
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to connect
You can connect a set of headphones to the  connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.
To adjust the volume . . .
1 - Press  and select 2 - Select
press OK.
3 - Press  (up) or  (down) to adjust the volume. 4 - Press , repeatedly if necessay, to close the menu.
20
TV settings > Sound
Setup
and press
>
OK.
Headphones volume
and
21
5
Switch on
5.1
On or Standby
Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up.
• Press the Joystick to confirm a selection or setting.
With the TV in standby, press  onon the remote control to switch the TV on.
Switch to standby
To switch the TV to standby, press  on the remote control.
Switch Off
To switch the TV Off, press the Joystick on the right or on the back. The red indicator light is off. The TV is still connected to the mains power but consumes a minimum of energy. To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
5.2
Keys on TV
While the on-screen display is on, press the Joystick to display the menu.
• Use the arrow/nevigation keys to nevigate up, down, left or right.
22
6
Remote control
6.1
Key overview
Top
- 
1
Standby
To switch the TV On or back to Standby.
-
2
Playback and record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to record now
-
3
Settings
To open the Settings menu.
-
4
TV GUIDE
To open or close the TV guide.
-
5
SEARCH
To open the Popular searches page.
-
6
Picture format
To open or close the Picture format menu.
/
On
keys
-
1
SMART TV
To open the Smart TV start page.
-
2
Colour keys
Follow on screen instructions. Blue key , opens Help.
-
3
INFO
To open or close programme info.
-
4
BACK
To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous Smart TV page.
-
5
HOME
To open or close the home menu.
-
6
EXIT
To switch back to watching TV.
-
7
OPTIONS
To open or close the Options menu.
- OK key
8
To confirm a selection or setting.
-
9
Arrow / navigation
To navigate up, down, left or right.
-
10
To open an extra small screen.
MULTIVIEW
keys
-
7
SOURCES
To open or close the Sources menu - the list of connected devices.
-
8
LIST
To open or close the channel list
Middle
Bottom
-
1
Volume
To adjust the volume level.
-
2
Number keys
To select a TV channel directly or to enter text.
-
3
SUBTITLE
To switch subtitles on, off or Automatic.
23
and
text keypad
-
4
Mute
To mute the sound or to restore it. 5 -
Channel
To switch to the next or previous channel in the channel list. To open the next or previous page in Text or start the next or previous chapter on a disc.
-
6
TEXT
To open or close Text / Teletext.
6.2
IR sensor for non-RF remote control
The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
6.4
Cleaning
Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on the remote control.
6.3
Batteries
1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type
batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.
For more information, press
.
use
Keywords
AAA-R03-1.5V
and look up
End of
24
7
Channel list
TV channels
7.1
Watching TV channels
Switch channels
To watch TV channels, press . The TV tunes to the TV channel you last watched.
Alternatively, press  to open the Home menu and select
Watch TV
To switch channels, press  + or  -. If you know the channel number, type in the number with the number keys. Press after you entered the number to switch channels.
To switch back to the previously tuned channel, press .
To switch to a channel from a channel list
While watching a TV channel, press channel lists.
and press OK.
to open the
LIST
OK
Favourite channels
You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list selected, you will only see your favourite channels when you switch through channels.
Create your favourite channel list
1 - While watching a TV channel, press channel list.
2 - Select All to view all channels. 3 - Select the channel, and press  to mark as favourite. 4 - The selected channel is marked with a . 5 - To finish, press . The channels are added to the Favourites
list. To remove a channel from the favourites list, select the channel
with , then press  again to unmark as favourite.
Reorder
You can reorder — reposition — channels in the Favourite channel list.
1 - In the channel list to reposition.
2 - Press . 3 - Select the channel to reorder and press OK. 4 - Press the
channel to another location and press OK. 5 - Once complete, press channel list.
You can highlight another channel and do the same.
Favourites
Navigation buttons
, highlight the channel you want
to move the highlighted
to exit from the Favourite
EXIT
to open the
LIST
The channel list can have several pages with channels. To view the next or previous page, press To close the channel lists without switching channels, press
LIST
again.
Radio channels
If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.
+
or
.
-
Channel list views
In the channel lists, you can find all installed TV and radio channels.
Next to the channel list you can set up a list of installed channels in
Channel logos
In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off. To switch off Channel logos . . .
1 - Press  and select 2 - Select
press OK.
3 - Select 4 - Press , repeatedly if necessary, to close the menu.
stations separately or discover the newly added
Radio
.
New
TV settings
and press OK.
Off
, which holds all installed channels,
All
Favourites
Setup
>
General settings
, view the
and press OK.
>
Channel logos
and
25
Rename channels
You can rename channels in the channel list. 1 - Select the channel you want to rename in one of the channel
lists.
2 - Select the channel to rename. 3 - Press .
You can enter text with the remote control keyboard or open the on-screen keyboard.
With the on-screen keyboard
• To open the on-screen keyboard, place the cursor in the name text field and press OK.
• To delete the character in front of the cursor, press
Backspace
• To enter a character, select the character with the arrow keys and press OK.
• To select uppercase characters, press .
• To select numbers or special characters, press .
• When you are ready, press  to close the on-screen keyboard.
• To finish renaming, select
With the remote control keyboard*
• To delete a character, position the cursor behind the character and press .
• To enter a character, press the character on the keyboard.
• When you are ready, press OK to select Press OK again to finish renaming.
For more information on using the keyboard, press * Only for the remote control with keyboard
.
Keywords
Done
and look up
and press OK.
Done
Remote control, keyboard
.
.
Some digital broadcasters have age rated their programmes. When the age rating of a programme is equal to or higher than the age you have set as age rating for your child, the programme will be locked. To watch a locked programme you must enter the child lock code. The parental age rating is set for all channels.
To set an age rating . . .
1 - Press  and select 2 - Select
press 3 - Enter a 4-digit Child lock code and confirm. Now you can set an age rating.
4 - Set the age and press OK. 5 - Press , repeatedly if necessary, to close the menu.
To switch off the parental age rating, select The TV will ask for the code to unlock the programme. For
some broadcasters / operators, the TV only locks programmes with a higher rating.
Set or change the lock code
To set the lock code or to change the current code . . .
1 - Press  and select 2 - Select
press OK. 3 - If a code is set already, enter the current Child lock code and then enter the new code twice.
The new code is set.
Forgotten your Child lock code?
If you forgot your code, you can override the current code and enter a new code.
Channel settings
OK.
Channel settings
and press OK.
Setup
>
Child lock
and press OK.
Setup
>
Child lock
>
Parental rating
as age setting.
None
>
Change code
and
and
Lock a channel
To prevent children from watching a channel or a programme, you can lock channels or lock age rated programmes.
Lock a channel
You can lock a channel to prevent children from watching it. To watch a locked channel you need to enter the Child lock code. You cannot lock programmes from connected devices.
To lock a channel . . . 1 - While watching a TV channel, press
Channel list
2 - In any list, select the channel you want to lock. 3 - Press
list, a locked channel is marked with a lock . To unlock a channel, select the locked channel in the channel list.
Press
to enter the Child lock code.
Parental rating
To prevent children from watching a programme not suitable for their age, you can use an age rating.
.
OPTIONS
OPTIONS
and select
and select Unlock channel. You will need
Lock channel
to open the
LIST
. In a channel
1 - Press  and select 2 - Select Channel settings >
press OK.
3 - Enter the overriding code 4 - Now enter a new Child lock code and enter it again to
confirm.
and press OK.
Setup
Child lock
8888
>
Change code
.
and
Options for channels
While watching a channel, depending on the type of channel (analogue or digital) you are watching or depending on the TV settings you made, some options are available.
Open the options menu
While watching a channel, press
OPTIONS
.
26
Universal access
With Universal access switched on, you can set some options for hearing impaired and visually impaired people. For more information, press
Universal access
Video selection
Digital TV channels can offer multi video signals (multi-feed broadcast), different camera viewpoints or angles of the same event or different programmes on one TV channel. The TV shows a message if any such TV channels are available.
Subtitles
Switch
Automatic
Subtitle language
For digital broadcast, you can select an available subtitle language temporarily if none of your preferred languages are available. For more information, press
Subtitles
Audio languages
Subtitles on
.
.
Keywords
.
and look up
or
Subtitles off
to show subtitles only when the sound is muted with
with this options. Select
Keywords
and look up
Select analogue or digital) or a connected device you are watching.
Share
Enables the user to communicate his activity with his social networks (such as Twitter, facebook or email).
to view technical information on the channel (if it is
Status
Picture format
If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen.
To change the picture format . . . 1 - While watching a TV channel, press  to open the
menu.
format
2 - Select a format from the list and press OK. The following format can be available according the picture on
screen . . .
Basic
- Fill screen
- Fit to screen
Advanced
- Last setting
- Shift
- Zoom
- Stretch
- Native
- Undo
Picture
For digital broadcast, you can select an available audio language temporarily if none of your preferred languages are available. For more information, press
languages
Dual I-II
If an audio signal contains two audio languages but one language — or both — has no language indication, this option is available.
Common interface
If prepaid premium content is available from a CAM, you can set the provider settings with this option.
HbbTV on this channel
You can block the HbbTV pages from a channel that offers HbbTV. For more information, press
MHP applications
Enable or disable the MHP applications. For more information, press
Status
.
Keywords
Keywords
Keywords
and look up
and look up
and look up
Audio
HbbTV
.
MHP
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV channels, press To close Text, press TEXT again.
.
Select a Text page
To select a page . . .
1 - Enter the page number with the number keys. 2 - Use the arrow keys to navigate.
TEXT
.
27
3 - Press a colour key to select a colour-coded subject at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press  or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press
Text options
In Text, press
Freeze page
To stop the automatic rotation of subpages.
Dual screen / Full screen
To show the TV channel and Text alongside each other.
T.O.P. overview
To open T.O.P. Text.
Enlarge
To enlarge the Text page for comfortable reading.
Reveal
To unhide hidden information on a page.
Cycle subpages
To cycle subpages when these are available
Language
To switch the group of characters that Text uses to display correctly.
Text 2.5
To activate the Text 2.5 for more colours and better graphics.
Text setup
Text language
Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language . . .
OPTIONS
OPTIONS
and select
T.O.P. overview
to select the following . . .
.
.
Menu language
To change the language or the TV menus and messages . . .
1 - Press  and select 2 - Select
press OK.
3 - Select the language you want and press OK. 4 - Press , repeatedly if necessary, to close the menu.
Audio languages
If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language.
1 - While you watch TV, press 2 - For digital channels, select
channels, select selection. 3 - Select from the available languages, then press OK.
Note:
If you have selected select between:
Main
SAP
TV settings
Alternate audio
Alternate audio
: Primary audio language or
: Secondary audio language
and press OK.
Setup
>
General settings
Audio language
. Press OK to confirm your
>
Menu language
OPTIONS
for analogue channels,
.
. For analogue
Subtitles and languages
Subtitles
Switch subtitles on
To open the Subtitle menu, press You can set subtitles to On, To show subtitles when the broadcasted programme is not in your language — the language you set for the TV, select
Automatic
the sound with . For analogue channels, subtitles must be made available in
. Also, this setting will show subtitles when you mute
.
.
Text
Off
SUBTITLE
or
Automatic
and
.
1 - Press  and select 2 - Select 3 - Select 4 - Select your preferred Text languages. 5 - Press , repeatedly if necessary, to close the menu.
Text 2.5
If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch off Text 2.5 . . .
1 - Press 2 - While watching the teletext, press  3 - Select 4 - Press , repeatedly if necessary, to close the menu.
Channel settings Primary Teletext
.
TEXT
Text 2.5
>
Setup
Off
>
or
.
and press OK.
Language
Secondary Teletext
.
OPTIONS
.
.
Subtitles for digital channels
There is no need to set subtitles in Text for digital channels. Digital channels can offer several subtitle languages for a programme. You can set a preferred primary and secondary subtitle language. If subtitles in one of these languages are available, the TV will show them.
28
Loading...
+ 64 hidden pages