Philips 47PFG7109/78, 55PFG7109/78 instructions for use

Register your product and get support at
www.philips.com/welcome
47PFG7109 55PFG7109
User Manual

Contents

1 My new TV 4
1.2 App gallery 4
1.3 Rental videos 4
1.4 Social networks 4
1.5 Ambilight+hue 4
1.6 Skype 4
1.7 Pause TV and recordings 5
1.8 Gaming 5
1.9 EasyLink 5
2 Setting up 6
2.1 Read safety 6
2.2 TV stand and wall mounting 6
2.3 Tips on placement 6
2.4 Power cable 6
2.5 Antenna cable 6
3 Network 8
3.1 Wireless network 8
3.2 Wired network 9
3.3 Network settings 9
4 Connections 11
4.1 Tips on connections 11
4.2 EasyLink HDMI CEC 12
4.3 Set-top box - STB 13
4.4 Home Theater System - HTS 13
4.5 Blu-ray Disc player 14
4.6 DVD player 15
4.7 Game console 15
4.8 USB Hard Drive 15
4.9 USB keyboard or mouse 16
4.10 USB flash drive 17
4.11 Photo camera 17
4.12 Camcorder 17
4.13 Computer 17
4.14 Headphones 18
5 Turn on 19
5.1 On or Standby 19
5.2 Keys on TV 19
5.3 Word mark brightness 19
6 Remote control 20
6.1 Key overview 20
6.2 Keyboard 21
6.3 IR sensor 21
6.4 Pairing with TV 22
6.5 Batteries 22
6.6 Cleaning 22
7 TV channels 23
7.1 Watching TV channels 23
7.2 Channel installation 26
8 Home menu 28 9 TV guide 29
9.1 What you need 29
9.2 Using the TV guide 29
9.3 Recordings 29
10 Sources 30
10.1 Sources list 30
10.2 From standby 30
10.3 EasyLink 30
11 Timers and clock 31
11.1 Sleeptimer 31
11.2 Clock 31
11.3 Switch off timer 31
12 3D 32
12.1 What you need 32
12.2 For Passive 3D sets 32
12.3 Care of the 3D glasses 32
12.4 Watch 3D 32
12.5 Optimal 3D viewing 32
12.6 Health warning 33
13 Games 34
13.1 Play a game 34
13.2 Two-player games 34
14 Your photos, videos and music 35
14.1 From a USB connection or network computer 35
14.2 Wi-Fi Miracast 36
15 Pause TV 38 16 Recording 39
16.1 What you need 39
16.2 Record a program 39
16.3 Watch a recording 39
17 Skype 41
17.1 About Skype 41
17.2 External camera 41
17.3 Start with Skype 41
17.4 Skype menu 42
17.5 My profile 42
17.6 Contacts 43
17.7 Calling on Skype 44
17.8 Skype credit 45
17.9 Skype settings 45
17.10 Sign out 47
17.11 Quit Skype 47
17.12 Terms of use & Privacy Policy 47
18 Smart TV 48
18.1 About Smart TV 48
18.2 What you need 48
18.3 Setup Smart TV 48
18.4 Smart TV Apps 48
18.5 Multi view 50
18.6 Reset Smart TV 50
19 Multi room 51
19.1 About Multi room 51
19.2 What you need 51
2
19.3 Using Multi room 51
20 Share this… 52 21 Settings 53
21.1 Setup menu 53
21.2 Picture 53
21.3 Sound 56
21.4 Ambilight 58
21.5 Universal access - Key beep 61
22 Specifications 62
22.1 Environmental 62
22.2 Reception 63
22.3 Display 63
22.4 Power 63
22.5 Dimensions and weights 63
22.6 Connectivity 63
22.7 Multimedia 64
23 Software 65
23.1 Software update 65
23.2 Software version 65
23.3 Open source software 65
23.4 Open-source license 65
24 Troubleshooting and support 71
24.1 Troubleshooting 71
24.2 Register 72
24.3 Help 72
24.4 Online help 72
24.5 Consumer Care / Repair 73
25 Safety and care 74
25.1 Safety 74
25.2 Screen care 75
26 Terms of use, copyrights and licenses 76
26.1 Terms of use 76
26.2 Copyrights and licenses 76
Index 79
3
1
Start Smart TV and add the video store App to the Smart TV start page.
My new TV
1.1
Smart TV
Connect this a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.
With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the TV with your tablet.
With your TV connected to the Internet, you can watch a rental video from an online video store, read the online TV guide or record your favorite TV show on a USB Hard Drive.
The Smart TV Apps add to the fun with all sorts of entertainment and convenient services.
In
Help
information.
1.2
Philips Smart LED TV
, press 
Keywords
to the Internet and discover
and look up
Smart TV
for more
Open the video store App, create your personal account, select the movie and press play. No fuss with downloading, you can watch the movie immediately.*
In
, press 
Help
more information. * Depending on the video streaming service of the selected
video store.
1.4
Keywords
and look up
Rental videos
for
Social networks
No need to get up to check your friend's messages on your computer. Open Smart TV, select your message back from your couch.
Smart TV supports the popular social networks Twitter. In
information.
Help
, press 
Keywords
social network
and look up
page and send a
App gallery
for more
App gallery
Open the collection of tailored websites for TV.
Find the App for YouTube videos, a national newspaper, an online photo album, Twitter, etc.
There are Apps for renting videos from an online video store and Apps for watching programs you missed.
If the App gallery does not have what you are looking for, try the World Wide Web and surf the Internet on TV.
In
Help
information.
1.3
App gallery
, press 
in Smart TV to browse the Apps, the
Keywords
and look up
App gallery
for more
Rental videos
To watch a Simply rent the latest movie from your regional online video store.
rental video
, you don't need to leave your home.
1.5
Ambilight+hue
With
Ambilight+hue
follow the Ambilight colors of the TV. The Philips hue lamps will expand the Ambilight effect across the
room. If you don’t have any Philips hue lamps yet, buy the
Philips hue Starter Kit
and install the bulbs and bridge. You can buy extra Philips hue bulbs separately.
, you can set up your
(includes a hue bridge and 3 hue bulbs)
Philips hue
lamps to
4
1.6
Skype
TV to show each screen as a full screen simultaneously. Each player can focus on his own game to play.
With
Skype™
You can call and see your friends from anywhere in the world. To make a video call, you need a camera with a built-in microphone and a good connection to the Internet. Some Philips TVs have a camera and microphone built in.
In
Help
information.
1.7
you can make video calls on your TV for free.
, press 
Keywords
and look up
Skype
for more
Pause TV and recordings
The TV uses 3D technology to show both screens. To play a two-player game with two different full screen pictures, you need a pair of 3D glasses for each player.
In
, press 
Help
Two player games
1.9
Keywords
for more information.
and look up
Game console or
EasyLink
With
EasyLink
ray Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected
devices.
you can operate a connected device, like a Blu-
If you connect a broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or simply take a break during a sports game, while the TV stores the broadcast on the USB Hard Drive. You can start watching again later. With a USB Hard Drive connected, you can also record digital broadcasts. You can record while you are watching a program or schedule a recording of an upcoming program.
In
, press 
Help
Recording
1.8
USB Hard Drive
Keywords
for more information.
, you can pause and record a
and look up
Pause TV
or
In
, press 
Help
information.
Keywords
and look up
EasyLink
for more
Gaming
If you select your game console in the Home menu, the TV switches to the settings ideal for gaming automatically.
If you play a multi-player game with split screens, you can set the
5
2
2.3
Setting up
2.1
Read safety
Read the safety instructions first before you use the TV. In Help, go to
2.2
Safety and care
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.
Use the product type number of the TV to look for the Quick Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
• For 55-inch TV: VESA MIS-F 400x400, M6
• For 47-inch TV: VESA MIS-F 300x300, M6
>
Safety
.
Tips on placement
• Position the TV where light does not shine directly on the screen.
• Dim lighting conditions in the room for best Ambilight effect.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the center of the screen.
2.4
Power cable
• Insert the power cable into the back of the TV.
• Make sure the power cable is securely inserted in the connector.
• Make sure that the power plug, in the wall socket, is accessible at all times.
• When you unplug the power cable, always pull the plug, never pull the cable.
POWER
connector on the
To attach the bracket securely, use screws of the length indicated in the drawing.
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV's weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
In
, press 
Help
information about turning the TV on or off.
Keywords
and look up Turning on for more
6
2.5
Antenna cable
Insert the antenna plug firmly into the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
ANTENNA
socket at the
7
3
Network
3.1
Wireless network
What you need
To connect the TV wirelessly to the Internet, you need a wireless router. Use a high-speed (broadband) connection to the Internet.
Network devices
The TV can connect to other devices in your wireless network, like your computer or smartphone. You can use a computer with Microsoft Windows or Apple OS X.
File sharing
On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*, Windows Media Player 11, Twonky™ or similar.
Install the media server software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV. * You can download the Philips MediaManager software from the Philips support site www.philips.com/support
Make the connection
Follow steps 1 to 9.
- Make sure that the router of your wireless network is
Step 1
turned on.
- Press  and select
Step 2
- Select
Step 3
- Select
Step 4
- Select
Step 5
- Select
Step 6
have a router with WPS (Wi-Fi Protected Setup), you can select
. Select your choice and press OK.
WPS
Connect to network
Connect
Wireless Scan
and press OK.
and press OK.
to scan for your wireless network. If you
and press OK.
Setup
and press OK.
Scan
Select router). The TV might find several wireless networks in your proximity.
WPS
If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press the connection. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS. If you must use the instead of WPS.
Step 7
network and press OK. If your network is not in the list because the network name is hidden (you turned off the SSID broadcast of the router), select
Manual entry Step 8
your encryption key (WEP, WPA or WPA2). If you have entered the encryption key for this network before, you can select If your router supports WPS or WPS PIN, you select
WPS PIN
Standard
Select passphrase or security key) manually. You can use the keyboard on the RC to enter the encryption key. Once you have entered the key, press
WPS PIN
To make a secured WPS connection with a PIN code, select
WPS PIN
shown and enter it in the router software on your PC. Return to the TV and press to enter the PIN code in the router software.
Step 9
successful.
Network configuration
If the connection fails, you can check the DHCP setting of the router. DHCP should be set to On. Alternatively, if you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP. To set the TV to Static IP, press  and select
OK configuration
you can set the IP address and other necessary settings in
IP configuration
to scan for your wireless network (your wireless
Scan
Connect
WPS PIN code
- From the list of networks found, select your wireless
to enter the network name yourself.
- Depending on the type of router, you can now enter
to make the connection immediately.
Next
or
Standard
Standard
Connect
and press OK. Write down the 8-digit PIN code
- A message will be shown when the connection is
. Select your choice and press OK.
to enter the encryption key (password,
.
Connect
. Consult the router manual on where
to connect, select
and press
Setup
. Select
Network settings
>
Static IP
in the same menu.
>
Network settings
. With Static IP selected in the menu,
>
to make
Scan
,
WPS
Network
Static
8
Network problems
Connect the router
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network.
• Make sure that the firewalls in your network allow access to the TV's wireless connection.
• If the wireless network does not work properly in your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality.
• Use a high-speed (broadband) Internet connection for your router.
3.2
Wired network
What you need
To connect and setup the router follow steps 1 to 5. 1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is turned on. 3 - Press  and select 4 - Select 5 - Select
The TV constantly searches for the network connection. A message will be shown when the connection is successful.
Network configuration
If the connection fails, you can check the DHCP setting of the router. DHCP should be set to On. Alternatively, if you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP. To set the TV to Static IP, press  and select press OK. Select
configuration
you can set the IP address and other necessary settings in
IP configuration
**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.
Connect to network
and press OK.
Wired
Network settings
>
Static IP
in the same menu.
and press OK.
Setup
and press OK.
and
Setup
>
Network settings
. With Static IP selected in the menu,
>
Network
Static
You need a network Use a router with a high-speed (broadband) connection to the Internet.
File sharing
On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*, Windows Media Player 11, Twonky™ or similar. Install the media server software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV. * You can download the Philips MediaManager software from the Philips support site www.philips.com/support
In
Help
software, supported
software.
, press
Keywords
to connect the TV to the Internet.
router
and look up
for an overview of supported media server
Media server
3.3
Network settings
To open the Network settings . . .
1 - Press  and select 2 - Select
View network settings
All current network settings are shown here. The IP and MAC address, signal strength, speed, encryption method, etc.
Network settings
- Network type
Sets the network to Wired or Wireless.
- Network configuration
Sets the network configuration to DHCP or Static IP.
Wi-Fi media playback
To receive multimedia files from smartphones or tablets, set the DMR to On.
Static IP configuration
If Static IP is selected, you can set all necessary static IP settings here.
Network settings
and press OK.
Setup
and press OK.
9
Wi-Fi Miracast
For more information on Wi-Fi Miracast, press
Keywords
Reset Wi-Fi Miracast group
and look up
Wi-Fi Miracast™
.
Clear the list of connected and blocked devices that are used with Miracast.
Wi-Fi smart screen
For more information on Wi-Fi smart screen, press
Keywords
TV network name
and look up
Wi-Fi smart screen
.
If you have more than one TV in your network, you can rename the TVs here.
Netflix settings
Adjust Netflix settings.
Clear Internet memory
With Clear Internet Memory, you clear all Internet files stored on your TV. You clear your Philips Smart TV registration and parental control settings, video store app logins, Smart TV app favorites, and Internet bookmarks and history. Interactive MHEG applications save cookies to your TV. These files are also cleared.
10
4
Connections
4.1
Tips on connections
Connectivity guide
Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
Go to
www.connectivityguide.philips.com
If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be turned On on the TV and the connected device. For more information on using EasyLink, press and look up
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management).
EasyLink CEC
.
Keywords
Antenna
If you have a Set-top box (a digital receiver) or Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or Recorder first before it enters the TV. In this way, the antenna and the Set-top box can send possible additional channels to the Recorder to record.
HDMI
HDMI CEC
HDMI ARC
All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel). If the device, typically a Home Theater System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals. You can use any HDMI connection on this TV to connect the HTS but ARC is only available for 1 device/connection at a time.
In case you prefer to turn off ARC on the HDMI connections, press  and select Select
TV settings
Setup
>
Sound
and press OK.
>
Advanced
>
HDMI ARC
.
Video-Audio LR
CVBS - Component Video is a high quality connection. Next to the CVBS signals add the Audio Left and Right signals for sound.
HDMI connections provide the best picture and sound quality. HDMI cables combine video and audio signals. Use an HDMI cable for high-definition (HD) and TV signals. For best signal quality, use a high-speed HDMI cable, and do not use HDMI cables longer than 5 m.
EasyLink HDMI CEC
11
Audio Out - Optical
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink.
Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theater System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In ­Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the audio capabilities of your Home Theater System. For more information, press
Out settings
If the sound does not match the video on screen, you can adjust the audio to video synchronization. For more information, press
to video sync
.
.
Keywords
Keywords
and look up
and look up
Audio
Audio
Example HDMI CEC branding names are property of their respective owners.
Operate devices
To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press an HDMI connection and press OK.
Once the device is selected, the TV remote control can control the device. However  and  other TV keys are not forwarded to the device. If the key you need is not on the TV remote control, you can select the key in the Options menu. Press  the screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu.
OPTIONS
SOURCES
and select
, select a device connected to
OPTIONS
Controls
keys and some
in the menu bar. On
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.
EasyLink setup
The TV comes with EasyLink turned on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
Note: Only devices that support function will respond to the TV remote control.
EasyLink remote control
EasyLink settings
The TV comes with all EasyLink settings turned on. You can turn off any EasyLink setting independently.
EasyLink
To turn off EasyLink completely . . .
1 - Press  and select 2 - Select 3 - Select 4 - Press , repeatedly if necessary, to close the menu.
EasyLink Remote Control
If you want devices to communicate but you don't want to operate them with the TV remote control, you can turn off EasyLink remote control separately. In the EasyLink settings menu, select and select
Pixel Plus link
Some devices, a DVD or Blu-ray Disc player, might have their own picture quality processing. To avoid bad picture quality caused by interference with the TV processing, the picture
TV settings
and press OK.
Off
.
Off
and press OK.
Setup
>
General settings
>
EasyLink
EasyLink Remote Control
.
12
processing of these devices should be disabled. The TV comes with Pixel Plus link turned on and disables the picture quality processing of recent Philips devices connected to the TV. To turn off Pixel Plus link, in the EasyLink settings menu, select
Pixel Plus link Auto turn off devices
You can set the TV to turn off the connecting HDMI-CEC compliant devices if they are not the active source. The TV switches the connected device to standby after 10 minutes of inactivity.
and select
Off
.
4.4
Home Theater System - HTS
Connect HTS
Use an HDMI cable to connect a Home Theater System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable, if the device has no HDMI connection.
4.3
Set-top box - STB
Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV.
HDMI ARC
If your Home Theater System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal, but once you have connected the Home Theater System, the TV can only send the ARC signal to this HDMI connection.
If the Home Theater System has no HDMI ARC connection, add an optical audio cable to send the sound of the TV picture to the Home Theater System.
Switch off timer Switch off this automatic timer if you only use the remote
control of the set-top box. This prevents the TV from turning off automatically after 4 hours without a key press on the TV remote control.
To turn off the Switch off timer, press  and select press OK. Select
TV settings
set the slider bar to
>
General settings
.
Off
>
Switch off timer
Setup
and
and
Audio to video synchronization (sync)
If the sound does not match the video on screen, you can set a delay on most Home Theater Systems with a disc player to match the sound with the video.
For more information, press
to video sync
13
.
Keywords
and look up
Audio
Audio Out settings
Audio Out delay
With a Home Theater System (HTS) connected to the TV, the picture on the TV and the sound from the HTS should be synchronized.
Automatic audio to video sync
With recent Philips Home Theater Systems, the audio to video sync is done automatically.
Audio sync delay
For some Home Theater Systems you may need to adjust the audio sync delay to synchronize the audio to the video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to turn off Audio Out delay on the TV.
To turn off the Audio Out delay . . .
1 - Press  and select 2 - Select
.
delay
3 - Select 4 - Press , repeatedly if necessary, to close the menu.
TV settings
and press OK.
Off
Setup
>
and press OK.
>
Sound
Advanced
>
Audio Out
1 - Press  and select 2 - Select
format
3 - Select 4 - Press , repeatedly if necessary, to close the menu.
Audio Out leveling
Use the Audio Out leveling setting to level the volume (loudness) of the TV and the Home Theater System when you switch over from one to another. Volume differences can be caused by differences in sound processing.
To level the difference in volume . . .
1 - Press  and select 2 - Select
leveling
3 - If the volume difference is large, select difference is small, select 4 - Press , repeatedly if necessary, to close the menu.
Audio Out leveling affects both the Audio Out - Optical and HDMI ARC sound signals.
TV settings
.
Multichannel
TV settings
.
Setup
>
or
Setup
>
Sound
Stereo
Sound
Less
and press OK.
>
Advanced
.
and press OK.
>
Advanced
.
>
Audio Out
>
Audio Out
. If the volume
More
Problems with HTS sound
Audio Out offset
If you cannot set a delay on the Home Theater System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theater System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms. The Audio Out delay setting should be turned on.
To synchronize the sound on the TV . . .
1 - Press  and select 2 - Select
offset
3 - Use the slider bar to set the sound offset and press OK. 4 - Press , repeatedly if necessary, to close the menu.
Audio Out format
If you have a Home Theater System (HTS) with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theater System. If you have a Home Theater System without multichannel sound processing, select Stereo.
TV settings
.
Setup
>
Sound
and press OK.
>
Advanced
>
Audio Out
Setup
>
Setup
.
Stereo
>
TV
Advanced
>
>
Audio out format
setting on the TV is turned On.
TV settings
>
Sound
.
HDMI ARC
>
Advanced
Audio
>
Sound with loud noise
If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theater System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theater System has no DTS sound processing. You can fix this by setting the
Out format
Press  and select
settings
No sound
If you cannot hear the sound from the TV on your Home Theater System, check the following . . .
• Check if you connected the HDMI cable to an connection on the Home Theater System. All HDMI connections on the TV are HDMI ARC connections.
• Check if the Go to
HDMI ARC
4.5
of the TV to
>
Sound
>
Home
.
HDMI ARC
Blu-ray Disc player
Use a
High speed HDMI
player to the TV.
cable to connect the Blu-ray Disc
To set the Audio Out format . . .
14
If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.
Video-Audio LR
Connect the game console with a composite cable (CVBS) and an audio L/R cable to the TV.
For more information on EasyLink, press up
EasyLink HDMI CEC
4.6
.
Keywords
and look
DVD player
Use an HDMI cable to connect the DVD player to the TV.
If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control.
For more information on EasyLink, press look up
EasyLink HDMI CEC
.
Keywords
and
4.8
USB Hard Drive
What you need
If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar).
To pause
To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 32GB of disk space.
To record
To pause and record a broadcast, you need a minimum of 250GB of disk space.
4.7
Game console
HDMI
For best quality, connect the game console with a high-speed HDMI cable to the TV.
TV guide
Before you decide to buy a USB Hard Drive to record, you should check if it is possible to record digital TV channels in your country. Press button on the TV guide page, you can record.
For more information on how to install a USB Hard Drive, press
15
TV GUIDE
Keywords
on the remote control. If there is a Record
and look up
USB Hard Drive, installation
.
Installation
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. Formatting removes all files from the USB Hard Drive.
1 - Connect the USB Hard Drive to one of the connections on the TV. Do not connect another USB device to the other USB ports when formatting.
2 - Turn on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel, press
(Pause). Trying to pause will start the formatting. Follow the instructions on screen. When the USB Hard Drive is formatted, leave it connected
permanently.
or
Recording
Keywords
.
Warning
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
For more information, press
TV
USB
and look up
Pause
Install the keyboard
To install the USB keyboard, turn on the TV and connect the USB keyboard to one of the the TV detects the keyboard for the first time, you can select your keyboard layout and test your selection. If you select a Cyrillic or Greek keyboard layout first, you can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout was selected…
1 - Press  and select 2 - Select
settings Keys for channel renaming
• Enter key = OK
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard layouts, if a secondary layout is set, press the
Keys for Smart TV Apps and Internet pages
• Shift+Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
• * = fit the web page to the screen width
TV settings
and press OK.
Setup
>
Ctrl + Shift
connections on the TV. When
USB
and press OK.
General settings
>
keys simultaneously.
USB keyboard
USB mouse
Connect USB mouse
You can connect a USB mouse (USB-HID type) to navigate pages on the Internet.
4.9
USB keyboard or mouse
USB keyboard
Connect a USB keyboard (USB-HID type) to enter text on your TV.
You can connect a keyboard and a mouse to the TV. Use one of the
connections to connect.
USB
On an Internet page, you can select and click on links more easily.
OK
Back
Connect the mouse
Turn the TV on and connect the USB mouse to one of the connections on the TV. You can also connect the USB mouse to a connected USB keyboard.
Mouse clicks
• Left click =
• Right click =
16
USB
You can use the scroll wheel to scroll pages up and down. For more information on how to connect a keyboard,
press
Keywords
Mouse speed
You can adjust the speed of the mouse moving on screen.
and look up
USB keyboard
.
To adjust the speed . . .
1 - Press  and select 2 - Select 3 - Select 4 - Press the arrows  (up) or  (down) to increase or
decrease the speed.
5 - Press OK to store and close the setting. 6 - Press , repeatedly if necessary, to close the menu.
4.10
TV settings General settings
and press OK.
Setup
and press OK.
>
Mouse settings
and press OK.
USB flash drive
You can view photos or play your music and videos from a connected USB flash drive.
Insert a USB flash drive in one of the TV while the TV is turned on.
connections on the
USB
If the contents list does not appear automatically, press
SOURCE
Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.
For more information on viewing photos, press
Keywords
4.12
, select
and look up
and press OK.
USB
Your photos, videos and music
.
Camcorder
HDMI
For best quality, use an HDMI cable to connect the camcorder to the TV.
The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press
SOURCE
To stop watching the USB flash drive content, press  or select another activity. To disconnect the USB flash drive, you can pull out the flash drive anytime.
For more information on watching or playing content from a USB flash drive, press
videos and music
4.11
, select
and press OK.
USB
Keywords
.
and look up
Your photos,
Photo camera
To view photos stored on your digital photo camera, you can connect the camera directly to the TV.
Use one of the the camera after you have made the connection.
connections on the TV to connect. Turn on
USB
Video-Audio LR
Use a Video Audio L/R cable to connect the camcorder to the TV.
17
4.13
Computer
Connect
You can connect your computer to the TV and use the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the TV.
a movie) and press OK. 4 - Press , repeatedly if necessary, to close the menu.
Remember to set the Game or computer setting back to
Computer
4.14
when you stop playing the game.
Headphones
You can connect a set of headphones to the  connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.
To adjust the volume . . .
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV.
1 - Press  and select 2 - Select
press OK.
3 - Press  (up) or  (down) to adjust the volume. 4 - Press , repeatedly if necessary, to close the menu.
TV settings > Sound
Setup
and press
>
OK.
Headphones volume
and
Settings
Ideal monitor setting
If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically.
If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.
To set the TV to the ideal setting manually . . .
1 - Press  and select 2 - Select
style
3 - Select
TV settings
and press OK.
Game
and press
Setup
>
(for gaming) or select
Picture
>
Advanced
OK.
>
Computer
Activity
(for watching
18
5
Turn on
5.1
On or Standby
Make sure you have plugged in the main power on the back of the TV before you turn on the TV. If the red indicator light is off, press the Joystick on the right side on the back of the TV to put the TV in standby - the red indicator will light up.
With the TV in standby, press  on the remote control to turn the TV on.
Switch to standby
5.3
Word mark brightness
You can turn off or adjust the word mark lighting. To adjust or turn off…
1 - Press  and select 2 - Select
brightness
3 - Select the lighting of the word mark. 4 - Press , repeatedly if necessary, to close the menu.
TV settings
and press OK.
Maximum, Medium, Minimum
and press OK.
Setup
>
General settings
>
Word mark
or select
to turn off
Off
To switch the TV to standby, press  on the remote control.
Turn Off
To turn the TV Off, press the Joystick on the right of the TV on the back. The red indicator light is off. The TV is still connected to the main power but consumes a minimum of energy. To turn off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
5.2
Keys on TV
While the on-screen display is on, press the Joystick to display the menu.
• Use the arrow/navigation keys to navigate up, down, left or right.
• Press the Joystick to confirm a selection or setting.
19
6
Remote control
6.1
Key overview
Top
- 
1
Standby
To turn the TV On or back to Standby.
-
2
Playback and record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to fast forward
• Record , to record now
/
On
keys
-
1
SMART TV
To open the Smart TV start page.
-
2
Color keys
Follow the on-screen instructions.
-
3
INFO
To open or close program info.
-
4
BACK
To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous Smart TV page.
-
5
HOME
To open or close the home menu.
-
6
EXIT
To switch back to watching TV.
-
7
OPTIONS
To open or close the Options menu.
- OK key
8
To confirm a selection or setting.
-
9
Arrow / navigation
To navigate up, down, left or right.
-
10
To open an extra small screen.
MULTIVIEW
keys
-
3
To select an Ambilight setting.
4
To open or close the TV guide.
5
To open the Settings menu.
6
To open or close the Picture format menu.
7
To open or close the Sources menu - the list of connected devices.
8
To open the Popular searches page.
Ambilight
-
TV GUIDE
-
Settings
-
Picture format
-
SOURCES
-
SEARCH
Middle
Bottom
-
1
Volume
To adjust the volume level.
-
2
Number keys
To select a TV channel directly or to enter text.
-
3
CC
To turn subtitles on, off, or on during mute.
-
4
LIST
To open or close the channel list.
-
5
Channel
To switch to the next or previous channel in the channel list. To open the next or previous page in Text or start the next or previous chapter on a disk.
and
text keypad
-
6
Mute
To mute the sound or to restore it.
20
-
7
(Dot)
To enter digital sub-channels.
6.2
Enter text
• To enter text into a text field, select the text field and start typing. Press OK to confirm the text.
Keyboard
Overview
Overview of a keyboard.
-
1
Character
Character position.
-
2
Shift
To type uppercase characters.
-
3
Ω Special characters
To open the onscreen keyboard to select accented characters or symbols.
Uppercase and lowercase
• To type an uppercase character, press the  (Shift) key just before you type the character.
• To type several uppercase characters consecutively, press and hold the  key while typing.
• To type uppercase constantly, press the  key for 2 seconds to switch the keyboard in uppercase mode.
• To switch out of uppercase mode, press the  key again. If no keys are pressed for 20 seconds, uppercase mode turns off automatically. Also, if you press another modifier key, like Fn or
, you switch out of uppercase mode.
Numbers and punctuation characters
• To type a number or punctuation character, press the Fn key just before you type the number or punctuation character you need. You can turn the Fn mode on or off as you would for the uppercase mode.
Internet
• You can use the Fn key to enter
www.
or
.com
.
- Fn key
4
To type a number or punctuation character.
-
5
Spacebar
Enter a space.
-
6
Navigation
Navigate through the menus, and confirm a selection.
-
7
Delete the character in front of the text cursor.
- 
8
Share this
To share online what you are now watching.
and
OK
Writing text
With the keyboard on the back of the remote control, you can write text in any text field on screen. Turn the keyboard facing upwards to activate the keyboard keys. Hold the remote control with two hands and type with both thumbs.
Accented letters and symbols
Accented characters and symbols are not directly available on the remote control keyboard. To type such a character, you can open the onscreen keyboard.
To open the onscreen keyboard, press Ω. In the onscreen keyboard, you can navigate to the character you need. Switch the keyboard layout with the color keys. Press OK to enter a character. The onscreen keyboard disappears when you press a character on the remote control keyboard.
Alternatively, you can enter special characters with the remote control SMS/text keypad on the front of the remote control.
6.3
IR sensor
The remote control of the TV uses RF (radio frequency) to send its commands to the TV. With RF, you do not need to point the remote control at the TV.
However, the TV can also receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
21
6.4
Pairing with TV
This remote control uses radio frequency (RF) to send its commands to the TV. Unlike remote controls using infrared signals, with this remote control you can send commands without pointing at the TV.
The TV will notify you when the battery power of the remote control is low.
6.5
Batteries
If the TV does not react on a key press on the remote control, the batteries might be empty.
To replace the batteries, open the battery compartment on the keyboard side of the remote control.
1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type
alkaline batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.
AAA-LR03-1.5V
Pairing the remote control
For the remote control to communicate with the TV, both TV and remote control should be paired with each other. Once paired, you cannot use the remote control to control another TV. When you started the initial TV installation, the TV asked you to press the OK key, and by doing so, the pairing was done. When you turn off the TV, the pairing is stored. You can pair up to 5 remote controls with this TV.
Pairing again
You can pair another remote control with this TV. The method to pair a remote control is different for a remote control already paired with another TV compared with a remote control that is not paired yet.
The remote control is paired with another TV
To pair, hold the remote control close to the Philips logo (about 4 in) and press the  Red and  Blue key at the same time. A message will appear if pairing is successful.
The remote control is not paired yet
To pair, hold the remote control close to the Philips logo (about 4 in) and press OK. A message will appear if pairing is successful.
For retail
Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.
For more information, press
.
use
6.6
Keywords
and look up
End of
Cleaning
Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on the remote control.
To pair a new — not yet paired — TV with a remote control which is already paired with another TV, hold the remote control close to the Philips logo (about 4 in) and press the Red and  Blue key at the same time. A message will appear if pairing is successful.
Note:
If the remote control is still fail to pair the TV, press  >
, then repeat pairing step again.
TV
Setup
>
TV settings
>
General settings
>
Reinstall
22
7
Channel list
TV channels
7.1
Watching TV channels
Switch channels
To watch TV channels, press . The TV tunes to the TV channel you last watched.
Alternatively, press  to open the Home menu and select
Watch TV
To switch channels, press channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.
To switch back to the previously tuned channel, press .
and press OK.
 
or
. If you know the
 
Favorite channels
You can create a favorite channel list that only holds the channels you want to watch. With the Favorite channel list selected, you will only see your favorite channels when you switch through channels.
Create your favorite channel list
1 - While watching a TV channel, press channel list. 2 - Select the channel and press selected channel is marked with a . 3 - To finish, press . The channels are added to the Favorites list
To remove a channel from the Favorites list, select the channel and press 
Channel list views
In the channel lists, you can find all installed TV and radio channels.
Channel list options
According to the channel list on screen, press select one of the options.
Remove
.
LIST
as favorites. The
Mark
to open the
OPTIONS
to
LIST
or
 
to open the
.
To switch to a channel from a channel list
While watching a TV channel, press channel lists.
In a channel list, navigate to a TV channel or radio station. With its icon highlighted, press OK to change the TV channel or listen to the radio station. The channel list can have several pages with channels. To view the next or previous page, press To close the channel lists without switching channels, press
Radio channels
If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel. A cable channel installation usually places radio stations from channel number 1001 onwards.
LIST
again.
 
Channel logos
In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can turn them off. To turn off Channel logos . . .
1 - Press  and select 2 - Select
press OK.
3 - Select 4 - Press , repeatedly if necessary, to close the menu.
Rename channels
You can rename channels in the channel list. 1 - Select the channel you want to rename in one of the channel
lists.
TV settings
and press OK.
Off
and press OK.
Setup
>
General settings
>
Channel logos
and
23
2 - Press  3 - You can enter text with the remote control keyboard or
open the on-screen keyboard.
With the remote control keyboard
• To delete a character, position the cursor behind the character and press .
• To enter a character, press the character on the keyboard.
• When you are ready, press OK to select again to finish renaming.
For more information on using the keyboard, press
Keywords
With the on-screen keyboard
• To open the on-screen keyboard, place the cursor in the name text field and press OK.
• To delete the character in front of the cursor, press
Backspace
• To enter a character, select the character with the arrow keys and press OK.
• To select uppercase characters, press .
• To select numbers or special characters, press .
• When you are ready, press  to close the on-screen keyboard.
• To finish renaming, select
Rename
and look up
.
.
Remote control, keyboard
and press OK.
Done
Done
. Press
.
OK
Some digital broadcasters have age rated their programs. When the age rating of a program is equal to or higher than the age you have set as age rating for your child, the program will be locked. To watch a locked program you must enter the child lock code. The parental age rating is set for all channels.
To set an age rating . . .
1 - Press  and select 2 - Select
press OK. 3 - Enter a 4-digit select and confirm. Now you can set an age rating.
4 - Set the age and press OK. 5 - Press , repeatedly if necessary, to close the menu.
The TV will ask for the code to unlock the program. For some broadcasters / operators, the TV only locks programs with a higher rating.
Content rating
You can block programs with objectionable content.
1 - Press  and select 2 - Select
lock
3 - If no child lock code is set, you must enter one now. Enter a 4-digit code. 4 - Set the content and press OK. The selected content is blocked. 5 - Press , repeatedly if necessary, to close the menu.
Set or change the lock code
Channel settings
Set code
Channel settings
.
Child lock code
and press OK. Enter a 4-digit
and press OK.
Setup
>
Child lock
and press OK.
Setup
>
Child lock
>
Age ratings lock
. If you did not set a code yet,
Child lock code
>
Content ratings
and
Lock a channel
To prevent children from watching a channel or a program, you can lock channels or lock age rated programs.
Lock a channel
You can lock a channel to prevent children from watching it. To watch a locked channel you need to enter the Child lock code. You cannot lock programs from connected devices.
To lock a channel . . . 1 - While watching a TV channel, press
Channel list
2 - In any list, select the channel you want to lock. 3 - Press
list, a locked channel is marked with a lock . To unlock a channel, select the locked channel in the channel list.
Press  to enter the
Age ratings lock
To prevent children from watching a program not suitable for their age, you can use an age rating.
.
OPTIONS
OPTIONS
Child lock
and select
and select
code.
LIST
Lock channel
Unlock channel
to open the
. In a channel
. You will need
To set the lock code or to change the current code . . .
1 - Press  and select 2 - Select
code
3 - If a code is set already, enter the current and then enter the new code twice.
The new code is set.
Forgotten your code?
To override and enter a new child lock code in case you forget it, enter 8888.
Channel settings
and press OK.
and press OK.
Setup
>
Child lock
>
Set code
Child lock code
or
Change
Options for channels
While watching a channel, depending on the type of channel (analog or digital) you are watching or depending on the TV settings you made, some options are available.
Open the options menu
While watching a channel, press
OPTIONS
.
24
Picture format
If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen.
To change the picture format . . .
Universal access - Key beep
When you press a button on the remote control or TV, you can set the TV to play a beep. For more information, press up
Universal access - Key beep
Closed captions
Turn
Closed captions on
options. Select when the sound is muted with .
Caption service
Select the correct type of closed-caption services. For more information, press
captions
Alternate audio
For analog channels, select Main or SAP for audio language.
Audio languages
For digital broadcast, you can select an available audio language temporarily if none of your preferred languages are available. For more information, press
languages
Dual I-II
.
On during mute
.
Keywords
.
or
Closed captions off
to show closed captions only
Keywords
Keywords
and look
and look up
and look up
with this
Closed
Audio
1 - While watching a TV channel, press  to open the
menu.
format
2 - Select a format from the list and press OK. The following formats can be available according the picture on
screen . . .
Basic
- Fill screen
- Fit to screen
Advanced
- Last setting
- Move
- Zoom
- Stretch
- Native
- Undo
Picture
Closed captioning (CC) and language
Closed captions
You can display closed captions at all times or only when the TV is muted.
To open
Closed captions
, press CC.
If an audio signal contains two audio languages but one language — or both — has no language indication, this option is available.
DTVi Applications
Display the list of Digital TV interactive applications. For more information, press
Status
Select
Status
analog or digital) or a connected device you are watching.
Share
Enables the user to communicate his activity with his social networks (such as Twitter or email). iTV not shown
Keywords
to view technical information on the channel (if it is
and look up
DTVi
.
Note:
• Digital TV interactive applications are not accessible when closed caption text is turned on.
• Not all TV programs, commercials and features include closed captioning information. See your local TV program listings for channels with closed captions. Captioned programs are typically listed with service marks, such as 'CC,' in the TV listings.
Turn on closed captions
1 - While you watch TV, press  2 - Select
Select type of closed captions
Closed captions
OPTIONS
> On and press OK.
.
25
Loading...
+ 56 hidden pages