Philips NE5533, 5533A, NE5534, SA5534, SE5534 User Guide

...
Philips Semiconductors Linear Products Product specification
NE5533/5533A/
NE/SA/SE5534/5534A
Dual and single low noise op amp
114
August 31, 1994 853-0222 13721
DESCRIPTION
This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) If very low noise is of prime importance, it is recommended that the 5533A/5534A version be used which has guaranteed noise specifications.
FEATURES
Small-signal bandwidth: 10MHz
Output drive capability: 600, 10V
RMS
at VS=±18V
Input noise voltage:
z
8 7
6
54
3
2
1
BALANCE/ COMPENSATION V+ OUTPUT
COMPENSATION
BALANCE
INVERTING INPUT
NON-INVERTING
V-
NE/SA/SE5534/5534A
D, FE, N Packages
1 2 3 4 5 6 7
8
9
10
11
12
14 13
NE5533/5533A
N Package
INV INPUT A
NON–INV INPUT A
BALANCE A
V–
BALANCE B
NON–INV B
INV B
BAL COMP A COMP A OUTPUT A V+ OUTPUT B
COMP B BAL COMP B
TOP VIEW
TOP VIEW
APPLICATIONS
Audio equipment
Instrumentation and control circuits
Telephone channel amplifiers
Medical equipment
ORDERING INFORMATION
DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG #
14-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5533N 0405B 14-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5533AN 0405B 8-Pin Plastic Small Outline (SO) package 0 to +70°C NE5534D 0174C 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 0 to +70°C NE5534FE 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5534N 0404B 8-Pin Plastic Small Outline (SO) package 0 to +70°C NE5534AD 0174C 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 0 to +70°C NE5534AF 8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C NE5534AN 0404B 8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA5534N 0404B 8-Pin Plastic Small Outline (SO) package -40°C to +85°C SA5534AD 0174C 8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C SE5534N 0404B 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) -55°C to +125°C SE5534AF 8-Pin Plastic Dual In-Line Package (DIP) -55°C to +125°C SE5534AN 0404B 8-Pin Plastic Dual In-Line Package (DIP) -40°C to +85°C SA5534AN 0404B
查询NE5533供应商
4
nVH
DC voltage gain: 100000
AC voltage gain: 6000 at 10kHz
Power bandwidth: 200kHz
Slew rate: 13V/µs
Large supply voltage range: ±3 to ±20V
PIN CONFIGURATIONS
Philips Semiconductors Linear Products Product specification
NE5533/5533A/
NE/SA/SE5534/5534A
Dual and single low noise op amp
August 31, 1994
115
ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER RATING UNIT
V
S
Supply voltage ±22 V
V
IN
Input voltage ±V supply V
V
DIFF
Differential input voltage
1
±0.5 V
T
A
Operating temperature range
SE -55 to +125 °C SA -40 to +85 °C NE 0 to +70 °C
T
STG
Storage temperature range -65 to +150 °C
T
J
Junction temperature 150 °C
P
D
Power dissipation at 25°C
2
16D Pkg 1350 mW 16N Pkg 1500 mW 8D Pkg 750 mW 8FE Pkg 800 mW 8N Pkg 1150 mW
Output short-circuit duration
3
Indefinite
T
SOLD
Lead soldering temperature (10sec max) 300 °C
NOTES:
1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6V. Maximum current should be limited to ±10mA.
2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance:
8-pin ceramic DIP 150°C/W 8-pin plastic DIP 105°C/W 8-pin plastic SO 160°C/W 16-pin plastic DIP 80°C/W 16-pin plastic SO 90°C/W
3. Output may be shorted to ground at V
S
=±15V, TA=25°C. Temperature and/or supply voltages must be limited to ensure dissipation rating is
not exceeded.
Philips Semiconductors Linear Products Product specification
NE5533/5533A/
NE/SA/SE5534/5534A
Dual and single low noise op amp
August 31, 1994
116
DC ELECTRICAL CHARACTERISTICS
TA=25°C, VS=±15V, unless otherwise specified.
1, 2, 3
SYMBOL
PARAMETER
TEST CONDITIONS
SE5534/5534A
NE5533/5533A
NE/SA5534/5534A
UNIT
SYMBOL
PARAMETER
TEST CONDITIONS
Min Typ Max Min Typ Max
UNIT
V
OS
0.5 2 0.5 4 mV
Offset voltage Over temperature 3 5 mV VOS/T 5 5 µV/°C I
OS
10 200 20 300 nA
Offset current Over temperature 500 400 nA IOS/T 200 200 pA/°C I
B
400 800 500 1500 nA
Input current Over temperature 1500 2000 nA IB/T 5 5 nA/°C
I
CC
Supply current
per op amp
Over temperature
4 6.5
9
4 8
10
mA mA
V
CM
Common mode input range ±12 ±13 ±12 ±13 V CMRR Common mode rejection ratio 80 100 70 100 dB PSRR Power supply rejection ratio 10 50 10 100 µV/V
A
VOL
Large-signal voltage gain
RL≥600, VO=±10V Over temperature
5025100 2515100 V/mV
V/mV
V
OUT
Output swing
RL≥600 Over temperature R
L
600, VS=±18V
R
L
2k
Over temperature
±12 ±10 ±15 ±13 ±12
±13 ±12
±16 ±13.5 ±12.5
±12 ±10 ±15 ±13 ±12
±13 ±12
±16 ±13.5 ±12.5
V V V V V
R
IN
Input resistance 50 100 30 100 k
I
SC
Output short circuit current 38 38 mA
NOTES:
1. For NE5533/5533A/5534/5534A, T
MIN
= 0°C, T
MAX
= 70°C
2. For SE5534/5534A, T
MIN
= -55°C, T
MAX
= +125°C
3. For SA5534/5534A, T
MIN
= -40°C, T
MAX
= +125°C
Loading...
+ 6 hidden pages