Philips 52PFL9632D/10 Firmware Upgrade Instruction
Software update
Philips continuously tries to improve its products. It
may be recommended for you to update the TV’s
software.To update your TV software you need a
USB Memory device (not supplied).
rNote
The device must have at least 48Mb free space.
Make sure the write protection is turned off.
Some USB devices do not work with our TV.
Contact your dealer.
1 Update assistant
The Update assistant helps you to update the TV’s
software.
1.1 TV identification
The TV will identify itself to your USB memory
device.
‡ Switch the TV on.
® Press Menu.
ÒPress navigation key right /π.
† Press navigation key up or down /o or œto
select Software update.
º Press navigation key right / π.
◊Press navigation key up or down /o or œ to
select Update assistant.
‹Press navigation key right /π.
≈Press
OK to activate.
Ú Insert a USB memory device to the USB
connector at the side of the TV.
The main menu appears.
œ Press the green key to proceed.
A message appears the TV has successfully
written the identification file to the USB
memory device.
πPress the green key again to finish.
Y Remove the USB memory device from the TV.
1.2 Software download from the PC to the
USB device
‡ Insert the USB memory device into a PC linked
to the internet.
® Locate and open the file “update.htm” on your
USB device.
ÒRead the instructions on screen and click on
the Send
ID button.
The software update is downloaded on the
USB memory device.
† Remove the USB memory device from your
PC.
1.3 Transfer of the downloaded software
update to the TV
The downloaded software on the USB memory
device must now be uploaded to your TV.
ç Caution
• Do not remove the USB memory device during
the software update.
• If a power drop occurs during the update, do not
remove the USB memory device from the TV.
The TV will continue the update as soon as the
power comes back.
‡ Insert the USB memory device to the USB
connector at the side of the TV.
® The TV switches off. The screen stays black for
about 10 seconds.Wait and do not use the
B
POWER switch on the TV.
1
u
e
C
.
t
t
es
on
e
BSU
BSU
men
settings
Featur
Installati
Software updat
Software updat
Update assistan
urrent software..
Local updates
Announcemen
Ò The update process star ts automatically. Please
wait.
The update is finished when the message
‘Operation successful’ appears on the screen.
† Remove the USB memory device from the TV.
º Press B
/ POWER on the remote control.
rNote
Do not press more than once and do not use the
B
POWER switch on the TV.
◊The TV switches off. The screen stays black for
about 10 seconds. Please, wait.
‹The TV switches back on again. The update is
done.
2Verify the current software version
Updating software is only possible if the version of
the new available software is different from the
current one.You can verify your current software
version.
‡ Select Software update in the TV menu.
® Press navigation key right /π.
ÒPress navigation key up or down /o or œ to
select Current software info.
The version and the description of the current
software appears.
2
S
U
Operation Successful! Re
g
S
U
BSU
B
POWER
Loading...