Philips 55PUN6102, 50PUN6102 User Manual

Register your product and get support at
www.philips.com/welcome
50PUN6102/61 55PUN6102/61
EN User Manual
Contents
1 Notice 2
Control Panel 5 Remote Control 5 Use of remote controller 6
Switch on, o, or standby 7 Switch channels 7 Switch to a device 8 Adjust the TV volume 8
5 Using More Feature of your TV 9
Access the TV menu 9 Access the Setup menu 9 Change languages 9 Install channels 9 Change the picture settings 9 Change the sound settings 10 Use sleep timer 11 Use TV lock 11 Use closed caption 12 Updating the TV software 12 Reset to factory settings 12
Bottom Connectors 17 Side Connectors 18 Connecting computers 18 Use Philips EasyLink 18
10 Product Information 20
Display resolutions 20 Multimedia 20 Sound power 20 Intrinsic Resolution 20 Tuner / Reception / Transmission 20 Remote Control 20 Power 20 Supported TV Mounts 21
General TV issues 22 TV channels have problems 22 Picture problem 22 Sound problem 23 HDMI connection problem 23 Computer connection problem 23 Contact Us 23
Software end user license agreement 24
English
Play from a USB connection 13 Remove the USB storage device 14 Picture formats supported by USB 14 Audio formats supported by USB 14 Video formats supported by USB 15
Automatic channel search 16 Manually set the channel list 16 Adjust picture aspect ratio automatically 16
1EN-GB
1 Notice
2018 © TP Vision Europe B.V. All Right Is Reserved. Specications may be subject to change without prior notice. All trademarks are the properties of Koninklijke Philips N.V or their respective owners. TP Vision Europe B.V. reserves the right to change products at any time without the need to give response to early inventory adjustment. The content in this manual is suitable for this system. If the intended use of the product or its individual components or programs is not within the specied scope in this manual, you will have to ensure its eectiveness and applicability. TP Vision Europe B.V. ensures that the manual itself does not infringe any patents of the United States. Disclaimer of Express or Implied Warranties TP Vision Europe B.V. is not responsible for any errors in the contents of this document, as well as any problems caused due to the content of this document. Errors reported to Philips will be applied and published on the Philips support website as soon as possible.
Pixel Characteristics
This LCD/LED product has a high color pixels. Although it has eective pixels of 99.999% or higher, the screen may appear black or have bright spots (red, green, or blue).This is the structural properties of the display (within the common industry standards), and is not a fault.
Copyright
All other registered and unregistered trademarks are the property of their respective owners.
® Kensington and Micro Saver are the trademarks registered by ACCO World Corporation in the United States and already registered and being applied for in other countries/regions of the world
Part of the copyright of this software belongs to © The FreeType Project (www.FreeType. org).
HDMI, HDMI logo and High-Denition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories. Dolby, Dolby audio and the double-D symbol are trademarks of Dolby Laboratories.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under licence from Koninklijke Philips N.V.
Change components
Users are not allowed to change any components. Do not open or remove the back cover of the television and expose its inside. It must be repaired by Philips service centers and ocial repair shops. Otherwise, all declared or implied warranties will be invalidated.
Any operations specically prohibited in this manual, any adjustments, or assembly procedures not recommended nor authorized in this manual are not within the scope of the warranty.
2
EN-GB
2 Important
Before you start using the TV, please read and understand all instructions. If it is damaged due to failure to operate in accordance with the instructions, it is not covered by the warranty.
Safety
Risk of electric shock or re!!
Do not expose the TV set to rain
or water. Do not place any liquid containers (such as vases) next to the TV. If liquid is spilled onto the surface or inside of the TV set, please power o the TV. Please contact Philips’ customer service center, do not use the TV set before check.
Do not put the TV, remote control or
batteries near ame or heat source that is not isolated, nor directly expose it to sunlight.
To avoid heat impact, keep the TV,
remote control and batteries away from candles or other sources of ignition.
Please do not insert any articles into
TV vents or other openings.
When the TV set runs, make sure that
the power cord does not become too tight. If the power cable becomes too tight, the plug may become loose and experience arcing.
Risk of short circuit or re!
Do not expose remote control
or batteries to rain, water or hot environments.
Please avoid subject the power plug
to external forces. A loose power plug may cause arcing or re.
Risk of TV damage or destruction!
The TV with a weight greater than 25
kilograms or 55 pounds needs to be handled by two persons.
Upon mounting the straight stand on
TV, be sure to use the attached base. Make sure that the straight stand can rmly support the TV set. Please place your TV on the at surface that can support the total weight of the TV set and the straight stand.
Upon wall-mounting the TV set,
please be sure to use the bracket that can support the weight of the TV set. Fix the bracket rmly on the wall that can support the total weight of both the TV set and the bracket. TP Vision Europe B.V. does not bear any responsibility for accidents, damage or destruction due to incorrect wall mounting of the TV set.
Some parts of this product may
contain glass elements. Please exercise caution to avoid personal injury or mechanical damage.
Causing the risk of injury of children!
Please observe the following precautions to avoid TV fall and child injury:
Do not place the TV set on the
surface covered by the fabrics or other materials easy to pull.
Ensure that TV set does not have any
part of it protruded beyond the edge of the surface.
To place the TV set on the top of a
tall item of furniture (bookcases, for example), please be sure to x the furniture and the TV set onto the wall or the appropriate support point.
Tell your children that climbing onto
furniture to touch the TV set is prone to danger.
Risk of overheating!
Do not place the TV set in a narrow
space. The TV must be reserved a space of at least 4 inches or 10 cm around it to ventilate. Make sure not
English
3EN-GB
to allow curtains or other objects to cover the vents of the TV set.
If inadvertently, the TV set may be damaged!
Before connecting the TV set to a
power outlet, make sure the outlet voltage is consistent with the values printed on the back of the TV set. If both voltage values do not match, do not connect the TV to the power outlet.
If your TV needs to be moved into the
storage room for storage, rst remove its base from the TV set. Do not place the TV set at against its back when its base is not removed.
Risk of injury, re or power cord damage!
Do not put the TV or any objects
upon the power line.
For easy removal of the TV’s power
cord from the power outlet, a smooth and easy access to the power cord should always be kept.
When pulling out the power cord, be
sure to pull it from its plug part, and never pull the cable.
Before the thunderstorm comes,
please cut o the connection between the TV set, the power outlet and the antenna. During a thunderstorm, do not touch any part, power cord or antenna cable of the TV set!
Risk of hearing loss!
Do not set the headset volume too
high and don’t use the headset for a long time.
Low temperatures
If the TV set is transported at an
ambient temperature below 5 °C or 41 °F, please wait for some time after the TV is taken out of the box until the TV’s temperature returns to room temperature before it is connected to the power outlet.
Screen protection
Please try to avoid rendering xed
images on the screen. A so-called xed image means an image stays on the screen for a long time. For example, on-screen menus, black bars, and time display. If you must use xed images, please reduce screen contrast and brightness to avoid screen damage.
Remove the power cord before
cleaning the TV.
Use a slightly damp, soft cloth to
clean the TV set and its frame. Do not use such substances as alcohol, chemicals or household cleaners to clean the TV set.
If inadvertently, the TV screen may
be damaged! Do not use items to touch, push, rub or strike the screen.
To avoid warping and fading, please
wipe the water droplets as soon as possible.
Note
Static images may cause permanent damage to the TV screen
• Do not display static images on the LCD/
LED screen for more than two hours, as this can cause ghosting. To prevent ghosting, please reduce the brightness and contrast of the screen.
• Watching TV in 4:3 format for a long time
may leave dierent marks on the left and right edges of the screen and the border of the image. Avoid using this mode for a long time.
• Long-term display of static images in
videos and games or computers can cause some blurring and ghosting due to screen burn. Please correspondingly reduce the screen brightness and contrast when using the TV set in this way.
The ghosting, partial ghosting and other traces displayed on the TV screen for the above reasons are not within the scope of this warranty.
4
EN-GB
3 TV Overview
Congratulations for purchasing and using Philips product! In order to enjoy all the supports provided by Philips, please register your TV at www.philips.com/welcome.
Control Panel
When the cursor is displayed in the
signal source, press this button to switch the signal sources.
Upon operating the common
interface, you can move the cursor up and down.
Remote Control
English
5
2 3
4
(Product shape may vary according to the dierent models, please refer to the actual models!)
a Open/close control menu:
On the control menu, when the
cursor is displayed in the volume, channel, signal sources, press this button to close the control menu.
When the cursor is displayed as
being shut down, press this button to shut down the TV set
Upon operating the common
interface, it can be used as an OK button.
b / c
Press to switch channels.
When operating the common
interface, you can move the cursor around.
d / e
When the cursor appears in the
volume, press this button to adjust the volume.
When the cursor is displayed in the
channel, press this button to switch channels.
1
1
2
3
6
8
10
14
16
a (Standby-Power On)
Start the display or enter the standby status.
4
5
7
9
11
12
13
15
17
18
19
2120
5EN-GB
30
5m
b Playback and Record
Control playback of multimedia les.
c Sleep timer
Quickly start and set the sleep timer.
d FORMAT
Change the picture format to suit the video source.
e SETUP
Open the Settings menu.
f SOURCES
Open or close the signal source menu, and select the connected device.
g TV
Switch back to the TV screen directly.
h
Open the Home menu.
i
Select corresponding tasks or options.
j INFO
Display the related information about the signals of the currently played screen.
k OPTIONS
Open or close the Options menu.
l OK button
Conrm an entry or selection. To press 0-9 number keys and then press OK (conrm) when selecting channels.
m navigation button
Navigate through menus and select items.
n BACK
Return to the previous level/page.
o LIST
Open or close the channel list.
p Volume +/-
Adjust volume.
q Channel +/-
Switch the next or previous channel.
r Mute
Mute or restore audio.
6
EN-GB
s 0-9 number keys
Select channels or enter text.
t EXIT
Close the menu.
u (Dot)
Enter digital sub-channels.
Use of remote controller
When using the remote control, press and hold it near the TV set, and point it to the remote control sensor.
Ensure furniture, walls or other objects have not blocked the sight between the remote control and the TV set.
(Product shape may vary according to the dierent models, please refer to the actual models!)
4 Using TV
This section introduces the basic operations of the TV.
Keys on TV
If you lost the remote control or its batteries are empty, you can still do some basic TV operations by using the joystick on the back of the TV.
English
Switch on, o, or standby
On or standby
Before you switch on the TV, make sure you plugged the power cord into the AC power outlet and on the back of the TV.
Turn on the TV
With the TV in Standby, press
(Standby-Power on) on the remote control to switch the TV on. You can also press the small joystick key on the back of the TV to switch the TV on in case you can’t nd the remote control or its batteries are empty
Switch to standby
Press the (Standby-Power on)
on the remote control. You can also press the small joystick key on the back of the TV.
Tip
• In standby mode, the TV is still connected
to the mains power but consumes very little energy.
• To switch o the TV completely, disconnect
the power plug.
• When disconnecting the power plug,
always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
Switch channels
Press Channel +/- on the remote
control.
Enter the channel number using the
number keys on the remote control.
Press BACK button on the remote
control to switch back to the previous channel.
Switch channels from a channel list
You can use the channel list to watch all the channels that can be received.
1 Press LIST.
» To display the channel list.
2 Use navigation button to select channels. 3 Press OK to watch the selected channel.
To close the channel list without switching channels, press
LIST again.
7EN-GB
Loading...
+ 21 hidden pages