Positioning the TV6
Regulatory notices6
Environmental care6
3 Get started7
Features7
Supplied accessories7
Installing the remote control batteries7
Stand assembly8
Attaching the base8
Remote control9
Control panel10
Terminals10
Connecting the antenna or the cable11
Connecting a set-top box, Blu-ray disc / DVD recorder via
composite connectors and Analog Audio11
Plugging in the AC power cord11
Selecting your connection quality12
HDMI Digital connection12
HDMI-DVI connection12
Component Analog Video Connection13
Composite Analog Video Connection13
Digital Audio Output Connection13
PC connection14
USB Memory Stick14
First time setup15
Language selection15
Auto Tuning15
5 Use more of your TV19
Displaying the Main Menu19
CHANNEL20
Tune Type20
Auto Tuning20
ATV Manual Tuning20
Program Edit20
Preparing for the software upgrade26
Downloading the software26
Starting the software upgrade26
8 Useful tips27
FAQ27
Troubleshooting28
4 Use your TV16
Switching on your TV and putting it in Standby mode16
Adjusting volume16
Switching channels16
Watching channels from an external device17
Sleep timer17
Switching audio mode17
Using favorite mode17
Changing picture format18
9 Information29
Glossary29
Maintenance29
10 Specifications30
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY
CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions –
new and old- must be supported on proper stands or installed
according to the manufacturer’s recommendations. Televisions
that are inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests, carts, etc., may fall over,
resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the
safe installation of your television.
• ALWAYS read and follow all instructions for proper use of
your television.
• NEVER allow children to climb on or play on the television or
the furniture on which the television is placed.
• NEVER place the television on furniture that can easily be used
as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be pushed,
pulled over or knocked down.
• ALWAYS route cords and cables connected to the television
so that they cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional installation if
you have any doubts about your ability to safely mount your
television.
• ALWAYS use a mount that has been recommended by the
television manufacturer and has a safety certification by an
independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and
mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are
mounting the television is appropriate. Some mounts are not
designed to be mounted to walls and ceilings with steel studs
or cinder block construction. If you are unsure, contact a
professional installer.
• Televisions can be heavy. A minimum of two people is
required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW
PLACE IN YOUR HOME
• Many new television buyers move their older CRT televisions
into a secondary room after the purchase of a flat-panel
television. Special care should be made in the placement of
older CRT televisions.
• ALWAYS place your older CRT television on furniture that is
sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser where
children may be tempted to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang
over the edge of your furniture.
CE.org/safety
Visit our World Wide Web Site at www.philips.com/support
English
3
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart / apparatus combination to avoid injury
from tip-over.
•The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall.
•For detailed information on installing the wall mount, refer to the
Wall Mount Instruction Book.
•P&F Mexicana is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV Wall
Mount Bracket or mount the TV onto the Bracket on your own.
• The Wall Mount Bracket must be installed by experts.
P&F Mexicana is not liable for these types of accidents or injury
noted below.
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall Mount
Bracket may fall which could result in a severe injury.
•Do not use screws that are longer or shorter than their specified
length. If screws too long are used this may cause mechanical or
electrical damage inside the TV set. If screws too short are used
this may cause the TV set to fall.
•Do not fasten the screws by excessive force. This may damage
the product or cause the product to fall, leading to an injur y.
•For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
•Do not mount the TV onto the Wall Mounting Bracket while
your TV is plugged in or Turned On. It may result in an electrical
shock injury.
When installing the unit on the wall, allow this much space.
Top: 11.8 inches (30cm)
Left and right side: 5.9 inches (15cm)
Bottom: 3.9 inches (10cm)
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in par ticular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC − National
Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
GROUND CLAMPS
ANTENNA DISCHARGE
UNIT (NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Wall Mount Bracket Kit
PHILIPS
SANUS
SANUS
Screw dimension
50PFL3708
39PFL3708/
39PFL4408
SQM6485
M6 x 1.614” (41mm)
with spacer
PHILIPS
SQM6435/17
M6 x 1.614” (41mm)
with spacer
SAN18BM4 x 0.472” (12mm)
32PFL3508 /
32PFL4208 /
29PFL4508
24PFL4508
MST15M4 x 0.472” (12mm)
Model #Brand
Important Safety Instructions
English
4
Trademarks are the property of Koninklijke Philips Electronics N.V. or
their respective owners.
P&F Mexicana reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use of
the system. If the product or its individual modules or procedures are
used for purposes other than those specified herein, confirmation of
their validity and suitability must be obtained. P&F Mexicana warrants
that the material itself does not infringe any United States patents. No
further warranty is expressed or implied.
P&F Mexicana cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of the
content in this document. Errors repor ted to P&F Mexicana will be
adapted and published on the P&F Mexicana support website as soon
as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural proper ty of the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this manual, any adjustments or
assembly procedures not recommended or authorized in this manual
shall void the warranty.
Copyright
All other registered and unregistered trademarks are the proper ty of
their respective owners.
The American Academy of Pediatrics discourages television viewing
for children younger than two years of age.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
LED backlighting technology uses less energy
when compared with a standard CCFL
backlighting LCD television of the same
screen size. Actual energy savings will vary
depending on the screen size.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
TruSurround XT® creates a truly immersive
surround sound experience with rich bass and
clear dialog from only two speakers.
1Notice
English
5
•Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
•Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
•Install the unit in a horizontal and stable
position.
•Do not install the unit in direct sunlight
or in a place subject to dust or strong
vibration.
•Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
• Avoid a place with drastic temperature changes.
• Do not place anything directly on top or bottom of the unit.
• Depending on your external devices, noise or disturbance of the
picture and / or sound may be generated if the unit is placed too
close to them. In this case, please ensure enough space between
the external devices and the unit.
•Do not insert the AC power cord into the power socket outlet
before all the connections are made.
•Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
•Before you move the TV, disconnect attached cables to prevent
damage to connectors.
•Be sure to unplug the AC power cord from the AC outlet before
moving or carrying the unit.
Do not place the unit on the furniture that is capable of being tilted
by a child and an adult leaning, pulling, standing or climbing on it.
A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to turn the unit on and go into standby mode.
To completely turn Off the unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the unit off when trouble is found or
not in use. The AC plug shall remain readily available.
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING: Batteries (batter y pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
WARNING: To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with the
instructions. Tipping, shaking, or rocking the unit may
cause injury / death.
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit -
www.recycle.philips.com
Philips pays a lot of attention to produce environment-friendly products
in green focal areas. Your new TV contains materials which can be
recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
End of life directives
AC plug
English
6
2Important
Positioning the TV
Environmental care
Regulatory notices
English
Note
Note
ModelQuantitySize
50PFL37088M4 x 0.472”(12mm)
39PFL4408
3M4 x 0.393”(10mm)
4M4 x 0.787”(20mm)
1*5.1 x 20mm
39PFL3708
3M4 x 0.787”(20mm)
1*5.1 x 20mm
32PFL3508 /
32PFL4208 /
29PFL4508 /
24PFL4508
3M4 x 0.984”(25mm)
AAA
AAA
7
3Get started
Features
•Analog TV / CATV
You can use your remote control to select channels which are broadcast in
conventional Analog format. Also, cable subscribers can access their cable TV channels.
•Auto tuning
This unit automatically scans and memorizes channels available in your area, eliminating
difficult setup procedures.
•MTS / SAP tuner
Audio can be selected from the remote control.
•Auto Standby
If there is no Input signal and no operation for 15 minutes, the unit will go into Standby
mode automatically.
•Sleep timer
You can set the unit to go into Standby mode after a specific amount of time.
•Choices for on-screen language
Select your on-screen language: English or Spanish.
•Stereo sound function
•Various adjustment for picture and sound
Customizes image quality suitable for your room and sets your sound preference.
•HDMI Input
•HDMI-DVI Input
If your video device has DVI Output jack, use an HDMI-DVI conversion cable to
connect the unit.
•Component Video Input
•PC Input
•AV Input
•USB terminal
The picture (JPEG) files stored on a USB Memory Stick can be played back on this unit.
•Digital Audio Output
•Headphone Audio Output
Supplied accessories
User ManualTV base and screws
50PFL3708 / 39PFL4408
Quick Start guide
Remote Control and
batteries
(AAA, 1.5V x 2)
Screws packed with this unit.
*This screw is for mounting the unit on your furniture.
39PFL3708 / 32PFL3508
32PFL4208 / 29PFL4508 / 24PFL4508
• If you lose the screws, please purchase the above-mentioned Phillips head screws at
your local store.
• If you need to replace these accessories, please refer to the part name or No. with the
illustrations and call our toll free customer support line found on the cover of this User
Manual.
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control is set to our brand.
Refer to the instruction book accompanying your remote control for more details.
• We do not guarantee 100% interoperability with all universal remote controls.
Installing the remote control batteries
Slide the battery cover off the back of the remote control.
1
2Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3Slide the cover back into position.
• Remove the batteries if not using the remote control for an extended period of time.
Stand assembly
50PFL3708 / 39PFL4408
× 4 [50PFL3708]
×
3 [39PFL4408: M4 x 0.393”(10mm)]
32PFL4208 / 29PFL4508 / 24PFL4508
× 2
50PFL3708 / 39PFL4408
× 4 [50PFL3708]
×
4 [39PFL4408: M4 x 0.787”(20mm)]
Note
39PFL3708 / 32PFL3508
2
1
× 3
32PFL4208 / 29PFL4508 / 24PFL4508
× 1
English
8
1
2
Attaching the base
You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction.
For large screen TVs, at least 2 people are required for these steps.
1
2
1
2
1
2
3
• Make sure to use a table which can suppor t the weight of this unit and is larger than
this unit.
• Make sure the table is in a stable location.
• When attaching the base, ensure that “FRONT” with “arrow” written on the bottom
of the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.
• When attaching the base, ensure that all screws are tightly fastened. If the base is not
properly attached, it could cause the unit to fall, resulting in injuries as well as damage
to the unit.
• To remove the base from this unit, unscrew the Phillips head screws in step 2.
Be careful not to drop the base when you remove it.
English
b
a
o
d
f
e
g
k
l
m
n
i
j
h
c
p
q
9
Remote control
a (POWER)
Turns the TV On from Standby or Off to Standby.
bButtons for Playback Mode
Use these Buttons for Playback Mode.
Begins, Restarts or Pauses the Media playback.
CStops the Media playback.
E / D Searches Backward or Forward through the disc.
/ Skips the file Backward or Forward.
cP. M O D E
Switches the Picture mode.
d (MENU)
Displays the main menu.
eINFO
Displays Information about the TV or the external device channel.
f▲▼◄► (NAVIGATION buttons) / OK
Moves the cursor. / Selects the On-screen Menu items.
gSLEEP
Sets Sleep Timer.
h SOURCE
Selects Connected devices.
iCH + / −
Selects a Channel.
jCOLOR(RED/GREEN/YELLOW/BLUE) buttons
Use these Buttons according to the directions On-screen.
k0 − 9 (NUMBER buttons)
Used to enter a Channel / Program number.
PREV.CH Returns to the previously viewed Channel.
lFAV
Displays the Favorite list.
m (MUTE)
Turns the Sound On and Off.
nVOL + / −
Adjusts the Volume.
oBACK
Returns to the previous Menu operation.
pFORMAT
Adjusts the Picture size on the TV screen.
qSAP
Selects Audio mode (MONO/STEREO/SAP).
10
50PFL3708
39PFL3708 / 39PFL4408 / 32PFL3508
* No function
edcba
fg
32PFL4208 / 29PFL4508 / 24PFL4508
edc
ba
g
f
*
No function
i
k
l
m
n
j
h
English
Control panel
*
Keys on Rear.
Control Keys are located
on the Rear side of the TV
fg
* No function
aVOL ◄/►
Adjusts the Volume. In the Menu screen, moves the Cursor Left
(◄) / Right (►).
VOL ◄ : Volume Down
VOL ► : Volume Up
bCH ▲/▼
Selects a Channel. In the Menu screen, moves the Cursor Up (▲)
/Down (▼).
cMENU
Opens the Main On-screen Menu.
dSOURCE
Selects Connected devices.
e (POWER)
Turns the TV On and Off.
fRemote Control Sensor
Receives IR signal from Remote control.
gPower On / Standby Indicator
(On : lights in white, Standby : no light)
* When seen from the front.
Te r m i n a l s
edcba
hComponent (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks
for VIDEO / Analog Audio (L/R) Input jacks
– Component Video / Analog Audio (L/R) jacks signal
– Composite Video / Analog Audio (L/R) jacks signal
iPC Input jack / VGA Audio cable connection for PC
– VGA cable connection for PC / Analog Audio (L/R) jacks signal
with Stereo mini 3.5mm plug Audio cable on PC
– HDMI-DVI / Analog Audio (L/R) jacks signal with Stereo mini
3.5mm plug Audio cable
jHDMI Input jack(s)
Digital audio and video Input from high definition Digital devices
such as DVD / Blu-ray disc players, cable / satellite set-top boxes
PC’s.
kUSB terminal
Data Input from USB Memory Stick only.
Do not connect any device to this terminal such as; Digital
camera, keyboard, mouse, etc.
l75 ohm Cable / Antenna connection
Signal Input from an antenna or cable / satellite set-top boxes.
mDigital Audio Output jack
Digital Audio (S/PDIF) Output to home theaters and other Digital
Audio systems.
nHeadphone Audio Output jack
Headphone 3.5mm stereo jack for personal listening.
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.