Philips 42PFH5209-88, 47PFH5209-88, 509PFH4109-88, 50PFH4109-88, 55PFH5209-88 Instruction manual

Register your product and get support at
www.philips.com/welcome
User Manual
Contents
1 Your new TV 3
2 Setting up 4
2.1 Read safety 4
2.2 TV stand and wall mounting 4
2.3 Tips on placement 4
2.4 Power cable 4
2.5 Antenna cable 5
2.6 Satellite dish 5
3 Connections 6
3.1 Tips on connections 6
3.2 EasyLink HDMI CEC 7
3.3 Common interface - CAM 8
3.4 Set-top box - STB 8
3.5 Satellite receiver 8
3.6 Home Theatre System - HTS 9
3.7 Blu-ray Disc player 10
3.8 DVD player 10
3.9 Game console 11
3.10 USB flash drive 11
3.11 Photo camera 11
3.12 Camcorder 11
3.13 Computer 11
3.14 Headphones 12
4 Switch on 13
4.1 On or Standby 13
5 Remote control 14
5.1 Key overview 14
5.2 Batteries 14
5.3 Cleaning 15
6 TV channels 16
6.1 Watching TV channels 16
6.2 Channel installation 19
7 Satellite channels 23
7.1 Watching satellite channels 23
7.2 Satellite channel list 23
7.3 Favourite satellite channels 23
7.4 Lock satellite channels 24
7.5 Satellite installation 25
7.6 Problems with satellites 27
8 TV guide 29
8.1 Using the TV guide 29
11.1 From a USB connection 32
12 Settings 34
12.1 Tint 34
12.2 Custom tint 34
12.3 Brightness 34
12.4 Game or computer 34
12.5 Format and edges 34
12.6 Location 34
12.7 Sound 34
13 Specifications 37
13.1 Environmental 37
13.2 Reception for PxHxxx9/PxTxxx9 37
13.3 Reception for PxKxxx9 38
13.4 Display 38
13.5 Power 38
13.6 Dimensions and weights_4009/41x9/4209 39
13.7 Dimensions and weights_43x9 39
13.8 Dimensions and weights_5219 40
13.9 Dimensions and weights_5109 40
13.10 Connectivity_20"-28"_4009/4109/4209/5219 40
13.11 Connectivity_32"-39"_41x9 41
13.12 Connectivity_40"-50"_41x9 41
13.13 Connectivity_32"-55"_4309/5109/5209 41
13.14 Sound 42
13.15 Multimedia 42
14 Software 43
14.1 Software update 43
14.2 Software version 43
14.3 Open source software 43
14.4 Open source license 43
15 Troubleshooting and support 62
15.1 Troubleshooting 62
15.2 Register 63
15.3 Help 63
15.4 Online help 63
15.5 Consumer Care / Repair 63
16 Safety and care 65
16.1 Safety 65
16.2 Screen care 66
17 Terms of use, copyrights and licenses 67
17.1 Terms of use 67
17.2 Copyrights and licenses 67
Index 69
9 Sources 30
9.1 Sources list 30
9.2 From standby 30
9.3 EasyLink 30
10 Timers and clock 31
10.1 Sleep timer 31
10.2 Clock 31
10.3 Auto switch off 31
11 Your photos, videos and music 32
2
1
Your new TV
1.1
EasyLink
With
EasyLink
Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected
devices.
you can operate a connected device, like a Bluray
3
2
- 47Pxx5209 - VESA MIS-F 400x400, M6
- 55Pxx5209 - VESA MIS-F 400x400, M6
Setting up
2.1
Read safety
Read the safety instructions first before you use the TV. In Help, go to
2.2
Safety and care
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.
Use the product type number of the TV to look for the Quick Start Guide to download.
>
Safety
.
To fix the bracket securely, use screws with a length indicated in the drawing.
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV's weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
Wall mounting
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
- 20Pxx4109 - VESA MIS-F 75x75, M4
- 22Pxx4109 - VESA MIS-F 75x75, M4
- 23Pxx4009 - VESA MIS-F 75x75, M4
- 24Pxx4109 - VESA MIS-F 75x75, M4
- 28Pxx4109 - VESA MIS-F 100x100, M4
- 32Pxx41x9 - VESA MIS-F 400x200, M6
- 39Pxx41x9 - VESA MIS-F 400x200, M6
- 40Pxx41x9 - VESA MIS-F 400x200, M6
- 42Pxx41x9 - VESA MIS-F 400x200, M6
- 47Pxx41x9 - VESA MIS-F 400x200, M6
- 50Pxx41x9 - VESA MIS-F 400x400, M6
- 22Pxx4209 - VESA MIS-F 75x75, M4
- 24Pxx5219 - VESA MIS-F 75x75, M4
- 32Pxx43x9 - VESA MIS-F 100x100, M4
- 40Pxx43x9 - VESA MIS-F 200x200, M4
- 50Pxx43x9 - VESA MIS-F 400x200, M6
- 32Pxx5109 - VESA MIS-F 400x200, M6
- 40Pxx5109 - VESA MIS-F 400x200, M6
- 48Pxx5109 - VESA MIS-F 400x200, M6
- 55Pxx5109 - VESA MIS-F 400x400, M6
- 42Pxx5209 - VESA MIS-F 200x200, M6
2.3
Tips on placement
- Position the TV where light does not shine directly on the screen.
- Position the TV up to 15 cm away from the wall.
- The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.
2.4
Power cable
- Insert the power cable into the back of the TV.
- Make sure the power cable is securely inserted in the connector.
- Make sure that the power plug, in the wall socket, is accessible at all times.
POWER
connector on the
4
- When you unplug the power cable, always pull the plug, never pull the cable.
For 22PFx4209
2.6
Satellite dish
Attach the satellite F-type connector to the satellite connection
at the back of the TV.
SAT
- Only for TVs with a built-in satellite tuner.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
2.5
Antenna cable
Insert the antenna plug firmly into the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C input signals.
ANTENNA
socket at the
5
3
Connections
3.1
EasyLink HDMI CEC
If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device.
Tips on connections
Connectivity guide
Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
Go to
www.connectivityguide.philips.com
Antenna
If you have a Set-top box (a digital receiver) or Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or Recorder first before it enters the TV. In this way, the antenna and the Set-top box can send possible additional channels to the Recorder to record.
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management).
HDMI ARC
HDMI 1 connection on the TV have HDMI ARC (Audio Return Channel). If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
HDMI
HDMI CEC
An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) or Full HD (FHD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.
In case you prefer to switch off ARC on the HDMI connections, press  and select
settings
>
Sound
>
and press OK. Select
Setup
Advanced
>
HDMI 1 - ARC
TV
.
Scart
SCART is a good quality connection. The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals.
Use the SCART adapter cable to connect your device.
6
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In ­Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
respective owners.
Operate devices
To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press an HDMI connection and press OK.
SOURCES
, select a device connected to
You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System.
If the sound does not match the video on screen, you can adjust the audio to video synchronization.
3.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink.
Example HDMI CEC branding names are property of their
Once the device is selected, the TV remote control can control the device. However  and  other TV keys are not forwarded to the device. If the key you need is not on the TV remote control, you can select the key in the Options menu. Press  the screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu.
Note: Only devices that support
Control
OPTIONS
function will respond to the TV remote control.
and select
OPTIONS
Controls
EasyLink Remote
keys and some
in the menu bar. On
EasyLink settings
The TV comes with all EasyLink settings switched on. You can switch off any EasyLink setting independently.
EasyLink
To switch off EasyLink completely . . .
1. Press  and select
2. Select
3. Select
4. Select
5. Press , repeatedly if necessary, to close the menu.
EasyLink Remote Control
If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately. You can control multiple HDMI-CEC compliant devices with your TV remote control.
In the EasyLink settings menu, select
Control
TV settings EasyLink
and press OK.
Off
and select
Setup
>
General settings
.
.
Off
and press OK.
>
EasyLink Remote
EasyLink
.
7
One-touch play
When you play an HDMI-CEC compliant device, the TV switches on from standby and switches to the correct source.
One-touch standby
When you press  on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode.
System audio control
If you connect an HDMI-CEC compliant device that includes speakers through the HDMI ARC connector, you can choose to hear the TV audio from those speakers instead of the TV speakers.
3.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes, like movies
and sports, offered by digital TV broadcasters in your region. These programmes are scrambled by the TV broadcaster and descrambled with a prepaid CI+ module. Digital TV broadcasters provide this CI+ module (Conditional Access Module - CAM) when you subscribe to their premium programmes. These programmes have a high level of copy protection.
Contact a digital TV broadcaster for more information on terms and conditions.
It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV. If a CAM is inserted and subscription fees are paid, (connection methods can differ), you can watch the TV broadcast. The inserted CAM is exclusively for your TV.
3.4
Set-top box - STB
Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV. Alternatively, you can use a SCART cable if the Set-top box has no HDMI connection.
Auto switch off Switch off this automatic timer, if you only use the remote
control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.
Use the Common Interface slot on the TV to insert the CAM card. With the front of the card facing to you, gently insert the CAM as far as it will go. Leave the card in the slot permanently.
To switch off the Switch off timer, press  and select press OK. Select
TV settings
set the slider bar to
3.5
>
General settings
.
Off
>
Auto switch off
Satellite receiver
- Only for TVs with a built-in satellite tuner. Connect the dish antenna cable to the Satellite receiver.
Setup
and
and
8
Next to the antenna connection, add an HDMI cable to connect the device to the TV. Alternatively, you can use a SCART cable if the device has no HDMI connection.
If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System.
Auto switch off
Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.
To switch off the Switch off timer, press  and select press OK. Select
TV settings
set the slider bar to
3.6
>
General settings
.
Off
>
Auto switch off
Setup
and
and
Home Theatre System - HTS
Connect HTS
Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable if the device has no HDMI connection.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you can set a delay on most Home Theatre Systems with a disc player to match the sound with the video.
Audio Out settings
Audio Out delay
With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised.
HDMI ARC
If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio to video sync is automatically synchronised and always correct.
Audio sync delay
For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to switch off Audio Out delay on the TV.
To switch off the Audio Out delay . . .
1. Press  and select
2. Select
3. Select
4. Press , repeatedly if necessary, to close the menu.
9
TV settings Off
Setup
>
Sound
and press OK.
and press OK.
>
Advanced
>
Audio out delay
.
Audio Out offset
If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 1ms. Maximum setting is 12ms. The Audio out delay setting should be switched on.
To synchronise the sound on the TV . . .
1. Press  and select
2. Select
3. Use the slider bar to set the sound offset and press OK.
4. Press , repeatedly if necessary, to close the menu.
TV settings
Setup
>
Sound
and press OK.
>
Advanced
>
Audio out offset
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.
1. Press  and select
2. Select
format.
.
No sound
If you cannot hear the sound from the TV on your Home Theatre System, check the following . . .
TV settings
Setup
>
and press
Sound
>
Advanced
OK.
>
Audio out
Audio Out format
If you have a Home Theatre System (HTS) with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System. If you have a Home Theatre System without multichannel sound processing, select Stereo.
To set the Audio Out format . . .
1. Press  and select
2. Select
format
3. Select
4. Press , repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out leveling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing.
To level the difference in volume . . .
1. Press  and select
2. Select
leveling
3. If the volume difference is large, select difference is small, select Press , repeatedly if necessary, to close the menu.
TV settings
.
Multichannel
TV settings
.
Setup
>
or
Setup
>
Sound
Stereo
Sound
Less
and press OK.
>
Advanced
.
and press OK.
>
Advanced
.
>
Audio out
>
Audio out
. If the volume
More
- Check if you connected the HDMI cable to a connection on the Home Theatre System. All HDMI
ARC
connections on the TV are HDMI ARC connections.
- Check if the
Go to  >
1 -ARC
3.7
Setup
.
HDMI ARC
>
setting on the TV is switched On.
TV settings
>
Sound
>
Advanced
HDMI
>
Blu-ray Disc player
Use a
High speed HDMI
player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.
3.8
cable to connect the Blu-ray Disc
DVD player
HDMI
Audio Out leveling affects both the Audio Out - Optical and HDMI ARC sound signals.
Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable, if the device has no HDMI connection.
10
content. If the contents list does not appear automatically, press
SOURCE
, select
and press OK.
USB
If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control.
3.9
Game console
HDMI
For best quality, connect the game console with an High speed HDMI cable to the TV
To stop watching the USB flash drive content, press select another activity. To disconnect the USB flash drive, you can pull out the flash drive anytime.
3.11
EXIT
Photo camera
To view photos stored on your digital photo camera, you can connect the camera directly to the TV.
Use one of the on the camera after you made the connection.
connections on the TV to connect. Switch
USB
or
3.10
USB flash drive
You can view photos or play your music and videos from a connected USB flash drive.
Insert a USB flash drive in one of the TV while the TV is switched on.
connections on the
USB
If the contents list does not appear automatically, press
SOURCE
Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.
3.12
, select
and press OK.
USB
Camcorder
HDMI
For best quality, use an HDMI cable to connect the camcorder to the TV.
The TV detects the flash drive and opens a list showing its
11
3.13
3.14
Computer
Connect
You can connect your computer to the TV and use the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the TV.
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV.
Headphones
You can connect a set of headphones to  connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.
To adjust the volume . . .
1. Press  and select
2. Select
press OK.
3. Press  (up) or  (down) to adjust the volume.
4. Press , repeatedly if necessay, to close the menu.
TV settings > Sound
Setup
and press
>
OK.
Headphone volume
and
Settings
Ideal monitor setting
If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically.
If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.
To set the TV to the ideal setting manually . . .
1. Press  and select
2. Select
compter
3. Select movie) and press OK.
4. Press , repeatedly if necessary, to close the menu. Remember to set the Game or computer setting back
to
TV settings
and press OK.
Game
Computer
when you stop playing the game.
and press
Setup
>
(for gaming) or select
Picture
>
Advanced
OK.
>
Computer
Game or
(for watching a
12
4
Switch on
4.1
On or Standby
Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the power button on the side of the TV to put the TV in standby - the red indicator will light up.
With the TV in standby, press  on the remote control to switch the TV On.
Switch to standby
To switch the TV to standby, press  on the remote control.
Switch Off
To switch the TV Off, press the power button on the side of the TV. The red indicator light is off. The TV is still connected to the mains power but consumes a minimum of energy. To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
13
5
Remote control
5.1
Key overview
Top
To switch back to the previous channel you selected. To close a menu without changing a setting.
5.
HOME
To open or close the home menu.
6.
EXIT
To switch back to watching TV.
7.
OPTIONS
To open or close the Options menu.
8. OK key
To confirm a selection or setting.
1.
Standby
To switch the TV On or back to Standby.
2. Playback
- Play , to playback.
- Pause , to pause playback
- Stop , to stop playback
- Rewind , to rewind
- Fast forward , to go fast forward
3.
To open or close the TV guide.
4.
SETUP
To open the Settings menu.
5.
To open or close the Picture format menu.
/
On
keys
TV GUIDE
FORMAT
Middle
9.
Arrow / navigation
To navigate up, down, left or right.
10.
LIST
To open or close the channel list.
keys
Bottom
1.
Volume
To adjust the volume level.
2.
Number keys
To select a TV channel directly or to enter text.
3.
SUBTITLE
To switch subtitles on, off or Automatic.
and
text keypad
1.
SOURCES
To open or close the Sources menu - the list of connected devices.
2.
Colour keys
The buttons function follow the on-screen instructions.
3.
INFO
To open or close programme info.
4.
BACK
4.
Channel
To switch to the next or previous channel in the channel list, to open the next or previous page in Text or start the next or previous chapter on a disc.
5.
Mute
To mute the sound or to restore it.
6.
TEXT
To open or close Text / Teletext.
14
5.2
Batteries
1. Slide the battery door in the direction shown by the arrow.
2. Replace the old batteries with 2 type
AAA-LR03-1.5V
of the batteries line up correctly.
3. Reposition the battery door.
4. Slide it back until it clicks.
Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.
batteries. Make sure the + and the - ends
5.3
Cleaning
Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on the remote control.
15
6
Channel list
TV channels
6.1
Watching TV channels
Switch channels
To watch TV channels, press . The TV tunes to the TV channel you last watched.
Alternatively, press  to open the Home menu and select
and press OK.
TV
To switch channels, press   or  . If you know the channel number, type in the number with the number keys.
Press OK after you entered the number to switch channel.
To switch back to the previously tuned channel, press .
to open the
LIST
To switch to a channel from a channel list
While watching a TV channel, press channel lists.
View all channel list
1. While watching a TV channel, press
channel list.
2. Press
3. Select
New channels
Favourite channels
You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list selected, you will only see your favourite channels when you switch through channels.
Create your favourite channel list
1. While watching a TV channel, press
channel list.
2. Select the channel to mark as favourite and
press
3. Select
marked with a .
4. To finish, press . The channels are added to the Favourites
list.
5. To remove a channel from the favourites list, select the
channel with a , then press
favourites
Reorder
You can reorder — reposition — channels in the Favourite channel list.
OPTIONS
, then you can select
List
.
OPTIONS Add favourites
and press OK.
to open Option menu.
.
and press OK. The selected channel is
All, Favourites, Radio
OPTIONS
to open the
LIST
to open the
LIST
, select
, and
Remove
The channel list can have several pages with channels. To view the next or previous page, press To close the channel lists without switching channel, press
again.
LIST
Radio channels
If digital broadcasting is available, digital radio station are installed during installation. Switch to a radio channel just like you switch to a TV channel.
+
or
 
.
1. In the channel list
to reposition.
2. Press
3. Select
4. Select the channel to reorder and press OK.
5. Press the
to another location and press OK.
6. Once complete, press
7. Select
You can highlight another channel and do the same.
Add or remove favourites in other channel lists
You can mark channels and radio stations as favourites from the
All, Radio
In these lists, highlight a channel you want to add to the favourite list and press
OK
The selected channel is marked with a . To remove a channel from the favourites list, select
favourites
Reorder
Exit reorder
and
.
and press OK.
OPTIONS
Navigation buttons
Favourites
and press OK.
and press OK.
channel list.
New
OPTIONS
.
, highlight the channel you want
to move the highlighted channel
OPTIONS
.
. Select
Add favourites
and press
Remove
16
Rename channels
You can rename channels in the channel list.
1. Select the channel you want to rename in one of the channel lists.
2. Press 
3. Select
Lock a channel
To prevent children from watching a channel or a programme, you can lock channels or lock age rated programmes.
Lock a channel
You can lock a channel to prevent children from watching it. To watch a locked channel you need to enter the Child lock code. You cannot lock programmes from connected devices.
To lock a channel . . .
1. While watching a TV channel, press
Channel list
2. In any list, select the channel you want to lock.
3. Press a locked channel is marked with a lock .
To unlock a channel, select the locked channel in the channel list, press to enter the Child lock code.
Parental rating
To prevent children from watching a programme not suitable for their age, you can use an age rating.
Some digital broadcasters have age rated their programmes. When the age rating of a programme is equal to or higher than the age you have set as age rating for your child, the programme will be locked. To watch a locked programme you must enter the child lock code. The parental age rating is set for all channels.
Rename
OPTIONS
OPTIONS
OPTIONS
.
.
and press OK.
and select
, then select
Lock channel
Unlock channel
to open the
LIST
. In a channel list,
. You will need
1. Press  and select
2. Select
press OK.
3. If a code is set already, enter the current Child lock code and
then enter the new code twice. The new code is set.
Forgotten your code?
To override and enter a new child lock code in case you forget it, enter
Channel settings
.
8888
and press OK.
Setup
>
Child lock
>
Change code
and
Picture format
If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen.
To change the picture format . . .
1. While watching a TV channel, press  to open the
menu.
format
2. Select a format from the list and press OK.
The following format can be available according the picture on screen . . .
- Auto
Adjust the picture format according to the input source.
-
Super zoom
Removes the black bars on the side of 4:3 broadcasts. The picture is adjusted to fit the screen.
- Movie expand 16:9
Scale 4:3 format to 16:9. Not recommended for HD or PC.
- Wide screen
Stretches the picture to a 16:9 format.
-
Unscaled
Expert mode for HD or PC input. Pixel for pixel display. Black bars may appear with pictures from a computer.
Picture
To set an age rating . . .
1. Press  and select
2. Select press
3. Enter a 4-digit Child lock code. Enter a 4-digit Child lock code and confirm. Now you can set an age rating.
4. Set the age and press OK.
5. Press , repeatedly if necessary, to close the menu.
6. To switch off the parental age rating, select setting.
The TV will ask for the code to unlock the programme. For some broadcasters / operators, the TV only locks programmes with a higher rating.
Set or change the lock code
To set the lock code or to change the current code . . .
Channel settings
OK.
and press OK.
Setup
>
Child lock
>
Parental rating
None
and
as age
- 4:3
Display the classic 4:3 format.
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV channels, press To close Text, press TEXT again.
17
TEXT
.
Select a Text page
To select a page . . .
1. Enter the page number with the number keys.
2. Use the arrow keys to navigate.
3. Press a colour key to select a colour-coded subject at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press  or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press and select
Favourite pages
The TV makes a list of the last 10 Text pages you opened. You can easily reopen them again in the Favourite Text pages column.
1. In Text, select the star in the top left corner of the screen to show the column of favourite pages.
2. Press  (down) or  (up) to select a page number and press
OK
T.O.P. overview
to open the page.
OPTIONS
.
Text options
In Text, press
- Freeze page / Unfreeze page
To stop the automatic rotation of subpages.
- Dual screen / Full screen
To show the TV channel and Text alongside each other.
- T.O.P. overview
To open T.O.P. Text.
- Enlarge / Normal view
To enlarge the Text page for comfortable reading.
- Reveal
To unhide hidden information on a page.
- Cycle subpages
To cycle subpages when these are available
- Language
To switch the group of characters that Text uses to display correctly.
- Text 2.5
To activate the Text 2.5 for more colours and better graphics.
Text setup
OPTIONS
to select the following . . .
.
You can clear the list with the option
Search Text
You can select a word and scan Text for all occurences of this word.
1. Open a Text page and press OK.
2. Select a word or number with the arrow keys.
3. Press OK again to jump immediately to the next occurence of this word or number.
4. Press OK again to jump to the subsequent occurence.
5. To stop searching, press  (up) until nothing is selected.
Text from a connected device
Some devices that receive TV channels can also offer Text. To open Text from a connected device . . .
1. Press , select the device and press OK.
2. While watching a channel on the device, press select
3. Press  to hide the device keys.
4. To close Text, press  again.
Digital Text (UK only)
Some digital broadcasters offer dedicated Digital Text or interactive TV on their digital TV channels. This includes normal Text using the number, colour and arrow keys to select and navigate.
To close Digital Text, press .
Show device keys
and select the  key and press OK.
Clear favourite pages
.
OPTIONS
Text language
Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language . . .
1. Press  and select
2. Select
3. Select
4. Select your preferred Text languages.
5. Press , repeatedly if necessary, to close the menu.
Text 2.5
If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch off Text 2.5 . . .
1. Press
,
2. While watching the teletext, press 
3. Select
4.Press , repeatedly if necessary, to close the menu.
Setup Channel settings Primary Teletext
.
TEXT
Text 2.5
>
Off
and press OK.
>
Languages
or
Secondary Teletext
.
.
OPTIONS
.
.
Subtitles and languages
Subtitles
Switch subtitles on
To open the Subtitle menu, press You can set subtitles to
SUBTITLE
Subtitles off, Subtitles on,
.
or
Automatic
.
18
To show subtitles when the broadcasted programme is not in your language — the language you set for the TV, select
Automatic
mute the sound with . For analogue channels, subtitles must be made available in
. Also, this setting will show subtitles when you
Text
To set the primary and secondary audio language . . .
1. Press  and select
2. Select
.
3. Select
audio language
4. Select a language and press OK.
5. Press , repeatedly if necessary, to close the menu. To select an audio language when none of your preferred audio
language is available . . .
Channel settings Primary audio language
and press OK.
and press OK.
Setup
and select
Languages.
or
Secondary
Subtitles for digital channels
There is no need to set subtitles in Text for digital channels. Digital channels can offer several subtitle languages for a programme. You can set a preferred primary and secondary subtitle language. If subtitles in one of these languages are available, the TV will show them. If none of the preferred subtitle languages are available, you can select another subtitle language which is available.
To set the primary and secondary subtitle language . . .
1. Press  and select
2. Select
3. Select
subtitle language
4. Select a language and press OK.
5. Press , repeatedly if necessary, to close the menu. To select a subtitle language when none of your preferred
languages are available . . .
1. Press
2. Select temporarily and press OK.
Channel settings
Primary subtitle language
and press OK.
OPTIONS
Subtitle language
and press OK.
Setup
and select
.
and select a language you want
Languages.
or
Secondary
1. Press
2. Select temporarily and press OK.
Audio languages for the hearing and visually impaired
Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired.
Menu language
To change the language or the TV menus and messages . . .
1. Press  and select
2. Select press OK.
3. Select the language you want and press OK.
4. Press , repeatedly if necessary, to close the menu.
6.2
OPTIONS
Audio language
TV settings
.
and select an audio language you want
and press OK.
Setup
>
General settings
>
Menu language
and
Channel installation
Update channels
Subtitles for analogue channels
For analogue channels, you need to make the subtitles available for each channel manually.
1. Switch to a channel and press
2. Enter the page number for subtitles, usually
3. Press If you select On in the Subtitle menu when watching this
analogue channel, subtitles will be shown if available. To know if a channel is analogue or digital, switch to the channel and open
Audio languages
Digital TV channels can broadcast audio with several spoken languages for a programme. You can set a preferred primary and secondary audio language. If audio in one of these languages is available, the TV will switch to this audio. If none of the preferred audio languages is available, you can select another audio language which is available.
again, to close Text.
TEXT
in the
Status
Options
TEXT
menu.
to open Text.
.
888
Automatic update
If you receive digital channels, you can set the TV to automatically update the list with new channels. Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels.
To switch off the message at start up . . .
1. Press  and select
2. Select
3. Select To switch off the Automatic channel update . . .
1. Press  and select
2. Select
Channel settings Channel installation
Channel settings
and press OK.
Setup
and press OK.
>
and press OK.
Setup
and press OK.
Channel update message
>
Off
.
19
3. Select .
Off
Channel installation
>
Automatic channel update
>
3. Press OK to confirm.
4. Press , repeatedly if necessary, to close the menu.
Start an update
To start an update yourself . . .
1. Press  and select
2. Select
3. Select
The update may take a few minutes. In certain countries, the Automatic channel update is done while
watching TV or any moment when the TV is in standby.
New channels
New channels added with the automatic channel update are easy to find in the channel list also stored in the
New channels are kept in the channel list don't mark them as a favourite or tune to them.
Setup Search for channels Update channels
All
and follow the instructions on screen.
or
Radio
and press OK.
and press OK.
. The same new channels are
New
channel list.
as long as you
New
Reinstall channels
You can search for and reinstall channels and leave all other TV settings untouched. Alternatively, you can do a full new TV installation.
Channel list copy
Introduction
Channel list copy is intended for dealers and expert users. In some countries, Channel list copy is only availble for copying satellite channels.
With
Channel list copy
one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV. Use a USB flash drive of minimum 1 GB.
Conditions
- Both TVs are from the same year range.
- Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA
- Both TVs have compatible software versions.
Current version
You can check the current version of the TV software with
Current software info
, you can copy the channels installed on
in
 > Setup > Software settings
.
If a child lock code is set, you will need to enter this code before you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1. Press  and select
2. Select
OK
3. Select the country where you install the TV.
4. Select search may take a few minutes. Follow the instructions on screen.
Full installation
To redo a full TV installation . . .
1. Press  and select
2. Select press OK. The installation may take a few minutes. Follow the instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV settings for picture and sound. To switch back to the original Factory settings . . .
1. Press  and select
2. Select press OK.
Search for channels
.
Antenna (DVB-T)
TV settings
TV settings
and press OK.
Setup
>
Re-install Channels
or
Cable (DVB-C)
and press
. The channel
and press OK.
Setup
>
General settings
>
Reinstall TV
and
and press OK.
Setup
>
General settings
>
Factory settings
and
Copy channel list
To copy a channel list . . .
1. Switch on the TV which has its channels installed. Plug in a USB memory device.
2. Press  and select
3. Select
list
from this TV, you might be asked to enter the Child lock code you entered during the installation.
4. When copying is done, unplug the USB memory device. Now you can upload the copied channel list onto another
Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or not, you must use a different way to upload a channel list.
To a TV that is not yet installed
1. Plug in the power plug to start the installation and select language and country. You can skip Search for channels. Finish the installation.
2. Plug in the USB memory device that holds the channel list of
TV settings
>
Copy to USB
and press OK. To copy the channel list
and press OK.
Setup
>
General settings
>
Copy channel
20
the other TV.
3. To start the channel list upload, press  and select press OK.
4. Select
Copy to TV
Child lock code of this TV.
5. The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB memory device.
TV settings
and press OK. You might be asked to enter the
>
General settings
>
Copy channel list
Setup
and
>
.
Manual
Channel number conflicts
In some countries, different TV channels (broadcasters) might have the same channel number. While installing, the TV shows the list with channel number conflicts. You need to select which TV channel you want to install on a channel number with multiple TV channels.
To an already installed TV
1. Verify the country setting of the TV. (To verify this setting, press  and select
channels Cancel
If the country is correct continue with step 2. If the country is not correct, you need to start a reinstallation. To start the reinstallation, press  and select Select Select the correct country and skip the Search for channels. Finish the installation. When done, continue with step 2.
2. Plug in the USB memory device that holds the channel list of the other TV.
3. To start the channel list upload, press  and select press OK.
4. Select
Copy to TV
Child lock code of this TV.
5. The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB memory device.
>
Reinstall channels
to leave the Search for channels.)
TV settings
TV settings
>
and press OK. You might be asked to enter the
and press OK. Select
Setup
and press OK. Press  and later
General settings
>
General settings
Search for
and press OK.
Setup
>
Re-install TV
>
Copy channel list
> OK.
Setup
and
>
DVB-T or DVB-C
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-C input, you can set up your TV for both DVB-T and DVB-C. Install one system followed by the other with the necessary settings. Once each system is installed, you need to switch the antenna input signal on the and set the TV in the appropriate system to view the installed channels on TV. To select the DVB-T or DVB-C setting, see above.
DVB settings
Access DVB settings
1. Press  and select
2. Select
3. Select
4. Select the country where you install this TV.
5. Select
6. Select
settings
7. Press , repeatedly if necessary, to close the menu.
Search for channels Re-install Channels
Cable (DVB-C) Start to search channels
.
Antenna
Setup
connection on the back of the TV
and press OK.
and press OK.
.
.
, or select
Settings for DVB-C
DVB-T or DVB-C reception
If both DVB-T and DVB-C reception is available in your country and if this TV is ready to receive DVB-T and DVB-C for your country, you have selected one or the other during the channel installation.
If you want to change the DVB setting to start a new channel installation . . .
1. Press  and select
2. Select
3. Select
Antenna (DVB-T)
4. Select the DVB setting you want.
5. Press , repeatedly if necessary, to close the menu.
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic. If your DVB-C provider gave you specific DVB-C values, the network ID or network frequency, enter these values when the TV asks for them during installation. It might be necessary to adjust the scanning (full or quick scan) or enter a specific symbol rate in the installing. To set a
Channel settings Channel installation
or
Symbol rate
and press OK.
Setup
and press OK.
>
Antenna connection
Cable (DVB-C)
, first set the Symbol rate to
and press OK.
Settings
menu while
>
Symbol rate mode
If your cable provider did not give you a specific value to install the TV channels, leave the setting on
If you received a specific symbol rate value, select However, the value you received could be in the predefined list of symbol rates already. Select check if your value is available automatically.
Symbol rate
With the symbol rate value you received from your cable provider. To enter the value, use the number keys.
Network frequency
With here the network frequency value received from your cable provider. To enter the value, use the number keys.
Automatic
Symbol rate mode
Frequency scan
.
set to
Predefined symbol rates
set to
Manual
or
Quick
Advanced
symbol rate
Symbol rate mode
.
Manual
to
, you can enter the
, you can enter
21
Loading...
+ 48 hidden pages