Philips 47PFG4109/78, 50PFG4109/78, 40PFG4309/78, 32PHG4109/78, 40PFG4109/78 instructions for use

Register your product and get support at

www.philips.com/welcome

PFG4009
PHG4009
PFG4109
PHG41x9
PFG4309

EN User Manual

Contents

1 Important 3

Safety 3
Care 4
Legal 5
Sustainability 6
Help and support 7

2 Use your TV 9

TV controls 9
Watch TV 11
View program guide 14
Play multimedia files 14
Interactive TV 15

3 Use more of your TV 17

Play games 17
Set locks and timers 17

4 Change your TV settings 19

Picture and sound 19
Channels 20
Language settings 22
Universal access settings 23
Other settings 23
Update software 23
Reset all 24

5 Connect your TV 25

About cables 25
Connect antenna 26
Connect devices 27
Connect more devices 34
Watch connected devices 37
Set up EasyLink devices 37

6 Troubleshooting 40

7 Specifications 43

Power and reception 43
Display and sound 43
Display resolutions 43
Multimedia 43
Connectivity 45

8 Index 46

General issues 40
Channel issues 40
Picture issues 41
Sound issues 41
Connection issues 42
Contact Philips 42

EN 2

English

1 Important

Safety

Precautions

Read and understand all instructions before
you use your TV. If damage is caused by
failure to follow the instructions, the
warranty does not apply.

Risk of electric shock or fire!

• Never expose the TV to rain or water.

Never place liquid containers, such as
vases, near the TV. If liquids are spilled
on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to
have the TV checked before use.

• Never place the TV, remote control or

batteries near naked flames or other
heat sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.

• Never insert objects into the ventilation

slots or other openings on the TV.

• Never expose the remote control or

batteries to rain, water or excessive
heat.

• Avoid force coming onto power plugs.

Ensure that the power plug is fully
inserted into the power socket. Loose
power plugs can cause arcing or fire.

• When the TV is swiveled, ensure that

no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.

• To disconnect the TV from the mains

power, the power plug of the TV must
be disconnected. When disconnecting
the power, always pull the power plug,
never the cord. Ensure that you have
full access to the power plug, power
cord and outlet socket at all times.

Risk of damage to the TV!

• Two people are required to lift and

carry a TV that weighs more than 25kg
or 55lbs.

• When stand mounting the TV, use only

the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat,
level surface that can support the
combined weight of the TV and the
stand.

• When wall mounting the TV, use only a

wall mount that can support the weight
of the TV. Secure the wall mount to a
wall that can support the combined
weight of the TV and wall mount. TP
Vision Europe B.V. bears no
responsibility for improper wall
mounting that results in accident, injury
or damage.

• If you need to store the TV,

disassemble the stand from the TV.
Never lie the TV on its back with the
stand installed.

• Before you connect the TV to the

power outlet, ensure that the power
voltage matches the value printed on
the back of the TV. Never connect the
TV to the power outlet if the voltage is
different.

• Parts of this product can be made of

glass. Handle with care to avoid injury
and damage.

EN 3

Risk of injury to children!
Follow these precautions to prevent the TV
from toppling over and causing injury to
children:

• Never place the TV on a surface

covered by a cloth or other material
that can be pulled away.

• Ensure that no part of the TV hangs

over the edge of the surface.

• Never place the TV on tall furniture,

such as a bookcase, without anchoring
both the furniture and TV to the wall
or a suitable support.

• Educate children about the dangers of

climbing on furniture to reach the TV.

Risk of swallowing batteries!

• The product/remote control may

contain a coin type battery, which can
be swallowed. Keep the battery out of
reach of children at all times!

Risk of overheating!

• Never install the TV in a confined space.

Always leave a space of at least 4
inches or 10 cm around the TV for
ventilation. Ensure that curtains or
other objects never cover the
ventilation slots on the TV.

Risk of injury, fire or power cord damage!

• Never place the TV or any objects on

the power cord.

• Disconnect the TV from the power

outlet and aerial before lightning storms.
During lightning storms, never touch
any part of the TV, power cord or
aerial cable.

Risk of hearing damage!

• Avoid using earphones or headphones

at high volumes or for prolonged
periods of time.

Low temperatures

• If the TV is transported in temperatures

below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting
the TV to the power outlet.

Care

Screen

• Risk of damage to the TV screen!

Never touch, push, rub or strike the
screen with any object.

• Unplug the TV before cleaning.

• Clean the TV and frame with a soft

damp cloth and wipe gently. Never use
substances such as alcohol, chemicals or
household cleaners on the TV.

• To avoid deformations and color fading,

wipe off water drops as soon as
possible.

• Avoid stationary images as much as

possible. Stationary images are images
that remain onscreen for extended
periods of time. Stationary images
include onscreen menus, black bars,
time displays, etc. If you must use
stationary images, reduce screen
contrast and brightness to avoid screen
damage.

Placement tips

• Position the TV where light does not

shine directly on the screen.

• The ideal viewing distance of this TV is

three times its diagonal screen size. For
example, if the diagonal screen size of
the TV is 81cm / 32", the ideal viewing
distance is ~2.5m / ~92" from the front
of the screen.

• While seated, your eyes should be level

with the center of the screen.

TV placement
You can apply the best sound settings for
your TV by selecting the TV placement (wall
mount or stand mount).

1. Press

2. Select [Setup], then press OK.

3. Select [TV settings] > [General settings]
> [TV placement].

4. Select [On a TV stand] or [Wall
mounted], then press OK.

.

EN 4

English

Lock the TV

Your TV is equipped with a Kensington
security slot at the base of the TV. To secure
the TV, purchase a Kensington anti-theft lock
(sold separately).

Legal

Notice

2014 © TP Vision Europe B.V. All rights
reserved.

This product was brought to the market by
TP Vision Europe B.V. or one of its affiliated
companies, further referred to in this
document as TP Vision, which is the
manufacturer of the product. TP Vision is the
warrantor in relation to the TV with which
this booklet was packaged. Philips and the
Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.

Specifications are subject to change without
notice. TP Vision reserves the right to
change products at any time without being
obliged to adjust earlier supplies accordingly.

The written material packaged with the TV
and the manual stored in the memory of the
TV or downloaded from the Philips web site,
are believed adequate for the intended use
of the system. If the product is used for
purposes other than those specified herein,
TP Vision cannot guarantee the proper
functioning and the safety of the product.

TP Vision cannot be held responsible for any
errors in the content of this document nor
for any problems as a result of the content in
this document. Errors reported to TP Vision
will be adapted and published on the Philips
support website as soon as possible.

Terms of warranty

• The terms of warranty can be

downloaded from the Philips support
web site. Never attempt to repair the
TV yourself because it gives risk of
injury, damage to the TV or void of
warranty!

• Use the TV and accessories only as

intended by the manufacturer.

• The caution sign printed on the back of

the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips TV Customer Care for
service or repairs.

• Any operation expressly prohibited in

this manual, or any adjustments and
assembly procedures not
recommended or authorized in this
manual shall void the warranty.

Pixel characteristics
This LED product has a high number of
color pixels. Although it has effective pixels
of 99.999% or more, black dots or bright
points of light (red, green or blue) may
appear constantly on the screen. This is a
structural property of the display (within
common industry standards) and is not a
malfunction.

Open source software

TP Vision Europe B.V. hereby offers to
deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such offer is
requested by the respective licences. This
offer is valid up to three years after product
purchase to anyone in receipt of this
information. To obtain the source code,
please write in English to:

“Intellectual Property Dept., TP Vision
Europe B.V., Prins Bernhardplein 200, 1097
JB Amsterdam, The Netherlands”.

EN 5

Trademarks and copyrights

Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.

Manufactured under license from Dolby
Laboratories. Dolby and the double D
symbol are trademarks of Dolby
Laboratories.

The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.

Kensington and Micro Saver are registered
US trademarks of ACCO World
Corporation with issued registrations and
pending applications in other countries
throughout the world.

The DTVi brand and logo are registered
marks of Pontifical Catholic University of Rio
de Janeiro (PUC-Rio) and the Federal
University of Paraíba (UFPB).

Java and all Java based trademarks are
registered trademarks of Oracle and/or its
affiliates, in the United States and other
countries.

All other registered and unregistered
trademarks are the property of their
respective owners.

Sustainability

Energy efficiency

This TV is designed with energy-efficient
features. To access these features, press the
Green button on the remote control.

• Energy saving picture settings: You can

apply a combination of energy saving
picture settings. While you watch TV,
press the Green button and select

[Energy saving]. Then select the
[Energy saving] picture setting.

• Screen off: If you only want to listen to

audio from the TV, you can switch off
the TV display. Other functions
continue to operate normally. While
you watch TV, press the Green button
and select [Screen off].

• Low standby power: The advanced

power circuitry reduces the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.

• Auto switch off: To conserve energy,

set the TV to switch off automatically
after a period of inactivity. While you
watch TV, press the Green button and
select [Auto switch off]. Then select
the period after which the TV switches
off.

• Switch off inactive devices: Switch off

connected EasyLink HDMI-CEC
(Consumer Electronic Control)
compliant devices that are inactive.
While you watch TV, press the Green
button and select [Inactive devices off].

• Power management: An advanced

power management helps save the
energy consumed by this TV. To view
how your personalized TV settings
affect the TV's relative power
consumption, press , then select

[Setup] > [Watch demos] > [Active
Control demo].

EN 6

English

Descarte do produto e de pilhas antigas

Seu produto foi projetado e fabricado com
materiais e componentes de alta qualidade,
que podem ser reciclados e reutilizados.

Baterias e Pilhas

ADVERTÊNCIA: Cuidados com a utilização
e descarte de pilhas e baterias.

Não descarte as pilhas e baterias no

•

lixo doméstico.
O descarte inadequado de pilhas e

•

baterias pode representar riscos ao
meio ambiente e à saúde humana.
Para contribuir com a qualidade

•

ambiental e com a saúde, a Envision
dispõe de pontos de coleta em suas
Assistências Técnicas.
Para evitar o vazamento de pilhas ou

•

baterias, o que pode resultar em danos à
saúde, ambientais e ao produto,
recomendamos que: (i) Remova as pilhas
do controle remoto se não for utilizá-lo
por um longo período de tempo. (ii)
Não misture pilhas (antigas com novas
ou pilhas comuns com alcalinas, etc.) (iii)
Não exponha o produto com
pilhas/baterias em seu interior a altas
temperaturas.
Pilhas e baterias descartadas recebidas

•

pelas Assistências Técnicas autorizadas
pela Envision serão encaminhadas à
destinação ambientalmente correta.
Em caso de dúvida ou consulta, favor

•

ligar para (11) 2938 0245 (Grande São
Paulo) e 0800 701 0245 (demais
regiões e estados) ou acessar o site

http://www.philips.com.br.

Linha Verde

Em caso de dúvidas relacionadas a
Sustentabilidade e Meio Ambiente, favor
ligar para a linha verde (92) 2126 8977. A
Envision e o Meio Ambiente agradecem sua
colaboração.

Energia em standby

Este modelo foi avaliado e recebeu a
classificação “A” do INMETRO, o selo Procel
da Eletrobrás para o consumo de energia em
modo de espera e a Etiqueta Nacional de
Conservação de Energia (ENCE).

EN 7

Help and support

Visit Philips website

For more information, visit the Philips
support website at
www.philips.com/support.

At the Philips support website, you can also:

• Find answers to Frequently Asked

Questions (FAQ)

• Download a printable PDF version of

this user manual

• Email us a specific question

• Chat online with Philips TV Consumer

Care (available in certain countries
only)

Use the Philips connectivity guide

An easy-to-use connectivity guide gives you
guidance on how to connect your TV to
other devices. Visit

http://www.connectivityguide.philips.com.

Search the TV forum

Your question may have already been
answered by the Philips TV community of
users. Visit

www.supportforum.philips.com.

Contact Philips

You can contact Philips TV Consumer Care
in your country for support. The number is
available in the leaflet accompanying this
product, or online at
www.philips.com/support.

Before you contact Philips, write down the
model and serial number of your TV. You
can find this information on the back of your
TV or on the TV packaging.

EN 8

English

2 Use your TV

TV controls

Sensors and indicators

 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:
 For PxG4109 - 32 to 50 inch TVs:

Remote control

1. (Standby): Switch the TV on or to

standby.

2. Play buttons: Control playback of
multimedia files.

TV GUIDE: Access TV guide.

3.

4.

USB: Access USB storage device.

5.

FORMAT: Change the picture

format to suit the video source.

SETUP: Access picture and sound

6.

menus.

 For PFG4309 - 40 inch TVs:

1. Standby indicator LED and remote
control sensor

The standby LED indicates when your TV is
in standby. Point the remote control at the
sensor. Make sure that the line of sight
between the remote control and the TV is
not blocked.

7.

SOURCES: Watch a connected

device.

(Home): Access the Home menu.

8.

9. OK: Confirm an entry or selection.

10.

EXIT: Exit from menus or TV

functions to watch TV.

11.

(Navigation buttons): Navigate

through menus and select items.

EN 9

12. Color buttons: Select tasks or options.
The buttons function according to the
services offered by the service provider

INFO: Display information about

13.

current activity.

(Back): Return to the previous

14.

menu page or exit from a TV function.

15. OPTIONS: Access currently
available options, picture and sound menus.

LIST: Access the TV channel list.

16.

17. +/- (Volume): Adjust volume.

18.

(Mute): Mute or restore audio.

19. +/-: Switch channels.

20. 0-9 (Numeric buttons): Select TV

channels or enter text.

21. CC (Closed captions): Switch on or off
closed captions. For programs that support
closed captions.

22. . (Dot): Enter digital sub-channels.

EasyLink controls

If you connect your TV to HDMI-CEC
enabled devices, such as a Blu-ray player or
home theater, you can control them at the
same time with one remote control. Simply
switch on EasyLink after connection.

Read more about Easylink in Connect your

TV > Set up Easylink devices > Control
devices (Page 38).

EN 10

English

Watch TV

Switch TV on or off

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

Switch off the TV
Press

on the TV.

The standby LED switches to off.
Note: Though your TV consumes very little

energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.

Automatic switch off
You can save energy with this TV's energy
efficiency settings, which are enabled by
default. If there is no user interaction (such
as pressing a remote control button or a
control on the TV) for four hours, the TV
will automatically switch to standby.

To disable automatic switch off

1. While you watch TV, press the Green
button on the remote control.

2. Select [Auto switch off], then press OK.

3. Use the Navigation buttons to make a
selection, then press OK.

Adjust TV volume

Switch the TV on

• Connect the TV to the mains outlet

and switch on the main power.

• If the standby LED is lit, press

the remote control.

Note: There is a short delay before the TV
responds.

Tip: If you cannot find your remote control
and want to switch on the TV from standby,

on the TV. The standby LED

press
switches off, then press

again.

Switch TV to standby
Press on the remote control.
The standby LED on the TV switches to red.

on

Increase or decrease the TV volume

• Press +/- on the remote control.

Mute or restore the TV volume

• Press

on the remote control to

mute the volume.

• Press

again to restore the volume.

Adjust headphone volume

1. Press

.

2. Select [Setup] > [TV settings] > [Sound]
> [Headphone volume], then press OK.

3. Select a level.

EN 11

Switch TV channels

• Press

+/- on the remote control.

• Press the Numeric buttons to enter a

channel number.

Manage favorite channels

You can view all channels or only a list of
your favorite channels.

Create a list of your favorite channels

1. Press

LIST.

The channel list is displayed.

2. Select the channel to mark as favorite,
then press

OPTIONS.

3. Select [Add/remove favorites], then press
OK.
The selected channel is marked with a star.

To remove a channel from the favorites list,
select [Add/remove favorites], and then
press OK.

Display your list of favorite channels

1. Press

LIST, then press OPTIONS.

2. Select [List] > [Favorites] to display
channels in the favorite list.

3. Press OK to confirm.

Manage channel lists

After the channels are installed, you can:

• Filter channels.

• Switch between antenna and cable

channels.

• Rename channels.

• Lock a channel.

Filter channels

1. While you watch TV, press

2. Press

OPTIONS, then select [Filter].

3. Select an option, then press OK.

• [Digital + Analog]: Display all channels

in the channels list.

• [Digital TV channels]: Display only

digital channels.

LIST.

• [Analog channels]: Display only analog

channels.

Note: The filtering options may vary
according to your broadcaster.

Switch between antenna and cable channels
You can switch between antenna and cable

channels.

1. While you watch TV, press

.

2. Select [Setup] > [Channel settings] >

[Channel installation] > [Antenna
connection].

3. Select [Antenna] to watch antenna
channels or [Cable] to watch cable channels,
then press OK.

Rename channels
When you select a channel, its name appears.
You can change this channel name.

1. While you watch TV, press

LIST.

The channel list is displayed.

2. Select the channel to rename, then press
OPTIONS.

3. Select [Rename], then press OK.

The onscreen keyboard is displayed.

4. Press the Navigation buttons to select

each character, then press OK.

5. Once complete, select [Done], then press

OK to confirm.
Lock a channel

You can prevent unauthorized access to
channels by locking them.

1. While you watch TV, press

LIST.

The channel list is displayed.

2. Select the channel to lock, then press
OPTIONS.

3. Select [Lock channel], then press OK.

4. If prompted, enter the pin code.

The channel is marked with a lock icon in
the channels list.

Tip: To watch a locked channel, enter the
pin code when prompted.

EN 12

English

Watch connected devices

Before you can watch a device, connect the
device to the TV. See Connect your TV >

Connect devices (Page 27).
Select a device with SOURCES

1. Press

SOURCES.

2. Select a device, then press OK.
Select a device from the Home menu

1. Press

.

2. Select [Source], then press OK.

3. Select the device, then press OK.
To add or manage your connected devices,

see Connect your TV > Watch connected

devices > Change device settings (Page 37).

Use picture and sound presets

Your TV comes with predefined picture and
sound settings. You can apply these settings
or customize them.

Select your preferred picture settings

1. While you watch TV, press

2. Select [Picture and sound] > [Picture
style], then press OK.

3. Select an option, then press OK:

• [Personal]: Apply your personalized

picture settings.

• [Vivid]: Rich and dynamic settings, ideal

for daytime viewing.

• [Football]: Ideal settings for football

matches.

• [Standard]: Default settings that suit

most environments and types of video.

• [Movie]: Ideal settings for movies.

• [Photo]: Ideal settings for photos.

• [Energy saving]: Settings that conserve

the most energy.

OPTIONS.

Select your preferred sound settings

1. While you watch TV, press

OPTIONS.

2. Select [Picture and sound] > [Sound

style], then press OK.

3. Select an option, then press OK:

• [Personal]: Apply your personalized

sound settings.

• [Original]: Settings that suit most

environments and types of audio.

• [Movie]: Ideal settings for movies.

• [Music]: Ideal settings for listening to

music.

• [Game]: Ideal settings for games.

• [News]: Ideal settings for spoken audio,

such as the news.

Change picture format

You can change the picture format to suit
the video source.

1. Press

2. Select a picture format, then press OK.

The available picture formats depend on the
video source:

• [Auto fill]: Adjust the picture to fill the

• [Auto zoom]: Enlarge the picture to fill

• [Super zoom]: Remove the black bars

• [Movie expand 16:9]: Scale 4:3 format

• [Wide screen]: Shows widescreen

• [Unscaled]: Provide maximum detail for

• [16:9 stretch]: Scale 4:3 format to 16:9.

• [4:3]: Display the classic 4:3 format.

FORMAT.

screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.

the screen. Recommended for minimal
screen distortion but not for HD or PC.

on the sides of 4:3 broadcasts. Not
recommended for HD or PC.

to 16:9. Not recommended for HD or
PC.

format content unstretched. Not
recommended for HD or PC.

PC. Only available when PC mode is
selected in the Picture menu.

EN 13

View program guide

What you can do

You can view channel schedules and
program synopses for digital TV channels
using program guides provided by the
broadcasters. The availability of program
guides is dependent on your broadcaster.

You cannot view a channel's program guide
information if:

• the age rating of the channel is equal or

higher than the age rating set on your
TV.

• the channel is locked.

From the broadcaster

Access broadcaster program guide

1. Press .

2. Select [TV guide], then press OK.

3. If you are viewing the program guide for
the first time, follow the onscreen
instructions to update the guide.

Customize broadcaster program guide
You can customize the displayed information
to:

• Remind you when programs start.

• Change day of display.

Note: Options may vary according to the
program information available from the
broadcaster.

1. In the program guide, press
OPTIONS.

2. Select an option, then press OK:

• [Update TV guide]: Update program

guide information.

• [Change day]: Select the day to display

program guide.

• [Search by genre]: Search programs by

genre.

Play multimedia files

What you can do

You can play videos, photos, and music on
your TV from a USB device connected to
the TV.

Play files from USB device

If you have photos, videos or music files on a
USB storage device, you can play the files on
TV.

Caution:

• Envision is not responsible if the USB

storage device is not supported, nor is
it responsible for damage or loss of
data in the device.

• Do not overload the USB port. If you

connect a USB storage device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.

Browse USB device

1. Connect the USB device to the USB
connector on the TV.

2. Press
then press OK.

3. Select a file from the content browser,
then press OK to start play.

4. Press the Play buttons to control play.
Tips:

• Select any of the options on the left of

Play options

Watch video

1. Select .

2. Press the Navigation buttons to select a
video file, then press OK to control play.

• Press

• To search forward or backward, press

• To stop the video, press

SOURCES, select [USB], and

the content browser to filter your files
by type.

to exit the content browser.

or . Press repeatedly to toggle

between different speeds.

.

EN 14

English

Video options

While you play video, press

OPTIONS,

then press OK to select an option:

• [Subtitles]: Switch on or off closed

captions. You can also select to display
the closed captions only when the TV is
muted.

• [Audio language]: Select an audio

language.

• [Repeat]: Select [Play once] to play all

of the video files once. Select [Repeat]
to play all of the video files repeatedly.

• [Show info]: Display the video

information.

• [Eco settings]: Adjust to save energy.

Note:

To view information about a video (for
example, played position, duration, title, or
date), select the video, then press

INFO.
To hide the information, press INFO
again.

Listen to music

1. Select

.

2. Press the Navigation buttons to select a
music track, then press OK to control play.

• Press

to exit the content browser.

• To search forward or backward, press

or . Press repeatedly to toggle

between different speeds.

• To stop the music, press .
Music options

While you play music, press OPTIONS,
then press OK to select an option:

• [Repeat]: Select [Play once] to play all

of the music files once. Select [Repeat]
to play all of the music files repeatedly.

• [Shuffle]: Enable or disable random play

of tracks.

• [Show info]: Display the music

information.

• [Eco settings]: Adjust to save energy.
Note:

To view information about a song (for
example, title, artist or duration), select the
song, then press
To hide the information, press

INFO.

INFO

again.

View photos

1. Select .

2. Press the Navigation buttons to select a
picture, then press OK to start the
slideshow.

Slideshow options
While you play a slideshow, press

OPTIONS, then press OK to select an

option:

• [Rotate image]: Select to rotate the

image.

• [Repeat]: Select [Play once] to watch

all of the slideshows once. Select
[Repeat] to watch all of the slideshows

repeatedly.

• [Shuffle]: Enable or disable random

display of pictures in the slideshow.

• [Slideshow frequency]: Select the

display time for each picture in the
slideshow.

• [Slideshow transitions]: Select the

transition from one photo to the next.

• [Show info]: Display the picture name,

date, size and next picture in the slide
show.

• [Eco settings]: Adjust to save energy.

Interactive TV

What you can do

For certain models only.

With interactive TV, you can view additional
information or entertainment pages provided
by digital TV broadcasters.

Note:

• You cannot download files to your TV

with this feature.

• Not all TV programs, commercials and

features include closed captioning
information.

• You cannot respond to the digital

content.

EN 15

Visit the broadcaster's website for more
information to see which interactive system
is available in your country.

Here are some examples of interactive
activities you can enjoy:

• View information about TV programs.

• Play games (for certain games only).

What you need

• To enjoy this service, you need digital

channels with interactive services.

Ginga option

While you watch digital TV, press

OPTIONS.

• [Ginga]: Select [On] to enable the

function.

• [Ginga autostart]: By selecting [On],

the TV will download video stream
and run its Ginga application
automatically if the video stream has
Ginga content.

• [DTVi applications]: User can run the

Ginga application manually from this
list when [Ginga autostart] is [Off].

•

Access interactive TV

You can identify channels that offer
interactive services by a message that invites
you to press the Red button or OK to
access an interactive program.

1. Switch to a digital channel with interactive
services.

2. Press the Red button or OK to launch
the interactive application.

3. Follow the onscreen instructions and use
your remote control to navigate the
interactive pages.

EN 16

English

3 Use more of

your TV

Play games

What you can do

On this TV, you can play regular games in
full-screen with optimized picture settings for
games.

What you need

• Connect your game console to this TV.

See Connect your TV > Connect

devices > Game console (Page 31).

Start gaming

1. Press SOURCES.

2. Select the game console, then press OK.

3. If needed, load a game disc on the game
console, then select a game to play.

4. Follow the onscreen instructions to start
gaming.

Set locks and timers

Clock

You can display a clock on the TV. The clock
displays the time that is broadcast by your
TV service operator.

Display the TV clock

1. While you watch TV, press OPTIONS.

2. Select [Clock], then press OK.
The clock is displayed on the top right-hand
corner of the TV screen.

Change the clock mode
You can change the clock mode to
automatic or manual. By default, it is set to
automatic mode, which automatically
synchronizes it to Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to

[Manual].

1. While you watch TV, press

2. Select [Setup] > [TV settings] > [General
settings].

3. Select [Clock] > [Auto clock mode].

4. Select [Automatic] or [Manual], then
press OK.

Change the time zone
In countries with clock transmission data, you

can change the time zone if [Auto clock
mode] > [Automatic] is selected.

1. In the [Clock] menu, select [Time zone].

2. Select your time zone, then press OK.
Set the clock manually

You can set the date and time manually.
Before you start, set the clock mode to
[Manual].

1. In the [Clock] menu, select [Date] or
[Time], then press OK.

2. Set the time or date with the Navigation
buttons.

3. Select [Done], then press OK.

.

EN 17

Sleep timer

You can switch the TV to standby after a
specified time. During the countdown to the
specified time, you can switch off your TV
earlier or reset the sleep timer.

1. Press

.

2. Select [Setup] > [TV settings] > [General
settings] > [Sleep timer].

3. Select the sleep timer duration.
The sleep timer can be set up for to 180
minutes. To switch off the sleep timer, set it
to zero minutes.

4. Press OK to activate the sleep timer.
After the specified time, the TV switches to
standby.

Child lock

To protect children from unsuitable TV
programs, you can lock the TV or block age
rated programs.

Set or change the child lock code

1. Press

2. Select [Setup] > [Channel settings] >
[Child lock].

3. Select [Set code] or [Change code].

4. Enter the code with the Numeric

buttons.
Tip: If you access the channels from the

channel list, you are prompted to enter your
lock code. If you forget your code, enter
‘8888’ to override any existing codes.

Lock or unlock channels

1. In the child lock menu, select [Channel
lock].

2. Enter the child lock code with the
Numeric buttons.

3. Select the channels to lock or unlock.
Restart the TV to activate the lock.

Note:
If you access the channels from the channel
list, you are prompted to enter your lock
code.

.

Age rating

You can set your TV to display only
programs with age ratings lower than your
child’s age. This restriction only applies to
digital channels from broadcasters that rate
their programs according to age.

1. Press

.

2. Select [Setup] > [Channel settings].

3. Select [Child lock] > [Age ratings lock].
You are prompted to enter the child lock
code.

4. Enter the child lock code with the
Numeric buttons.

5. Select an age rating, then press OK.
All programs above the selected age rating
are blocked.

For information on child lock codes, see Use

more of your TV > Set locks and timers >
Child lock (Page 18).

Content rating

You can block programs with objectionable
content.

1. Press

2. Select [Setup] > [Channel settings].

3. Select [Child lock] > [Content ratings
lock].
You are prompted to enter the child lock
code.

4. Enter your code with the Numeric
buttons.

5. Select the content to block, then press
OK.

The selected content is blocked.

.

EN 18

English

4 Change your TV

settings

Picture and sound

Settings assistant

You can select picture and sound settings
with the help of the settings assistant, which
demonstrates the effect of your chosen
setting immediately.

1. While you watch TV, press

2. Select [Setup] > [Quick picture and
sound settings], then press OK.

3. Select [Continue], then press OK.

4. Follow the onscreen instructions to
choose your preferred settings.

More picture settings

You can change the settings in the Picture
menu.

1. Press

2. Select [Setup] > [TV settings] > [Picture],
then press OK.

3. Select a setting to change, then press OK.

• [Picture style]: Select a predefined

• [Restore style]: Restore the

• [Backlight]: Adjust the brightness of the

• [Color]: Adjust the color saturation of

• [Sharpness]: Adjust the sharpness of

• [Noise reduction]: Select the amount

• [MPEG artifact reduction]: Smoothen

.

picture setting.

last-selected predefined picture setting.

display backlight.

the picture.

the picture.

of noise reduction for the picture.

transitions and haziness in the digital
picture.

.

• [Digital Crystal Clear]: Fine-tune each

pixel to match surrounding pixels and
produce a brilliant, high-definition image.

- [Advance sharpness]: Enable superior
sharpness, especially on lines and
contours in the picture.

- [Dynamic contrast]: Dynamically
enhance the details in the dark, medium,
and light areas of the picture.

- [Dynamic backlight]: Select a
backlight level to optimize dynamic
power consumption and picture
contrast.

- [Color enhancement]: Dynamically
enhance the vividness and details of
colors.

• [Advanced]: Access advanced settings

such as gamma, tint settings and video
contrast settings.

- [Gamma]: Adjust the non-linear
setting for picture luminance and
contrast.

- [Color temp.]: Select a predefined
color temperature.

- [Custom color temperature]:
Customize color temperature setting.

Only available if [Color temp.] >
[Custom] is selected.

- [Video contrast]: Adjust video
contrast.

- [Brightness]: Adjust screen brightness.

- [Tint]: Change the color balance. (For
ATV and in NTSC system only.)

• [Game or computer]: When viewing

content from a connected game
console, select [Game] to apply game

settings. When a computer is
connected through HDMI, select
[Computer].

• [Format and edges]: Access advanced

settings to control the display format of
the picture.

- [Picture format]: Change the picture
format.

- [Screen edges]: Change the picture
size.

- [Picture shift]: If available, move the
position of the picture.

EN 19

More sound settings

You can change the settings in the Sound
menu.

1. Press

2. Select [Setup] > [TV settings] > [Sound],
then press OK.

3. Select a setting to change, then press OK.

• [Sound style]: Access predefined sound

• [Restore style]: Restore the

• [Bass]: Adjust the bass level of the

• [Treble]: Adjust the treble level of the

• [Surround mode]: Select a surround

• [Headphone volume]: Adjust

• [Advanced]: Access advanced settings

.

settings.

last-selected predefined sound setting.

speaker and headphones.

speaker and headphones.

sound mode to enhance your audio
experience.

headphone volume.

to enhance your audio experience.

- [Auto volume leveling]: Enable the
reduction of sudden volume changes,
for example, when switching channels.

- [TV speakers]: Select the preferred
speakers to stream audio from the TV.

See Connect your TV > Set up

EasyLink devices > Select speaker
output (Page 38).

- [Clear sound]: Enhance sound quality.

- [Audio Out format]: Select the type
of audio output through the digital
audio output connector. Choose

between [Multichannel] and [Stereo].

- [HDMI side - ARC]: Enable audio
output from the ARC-compliant device
connected to the HDMI side
connector.

- [Audio out delay]: Automatically sync
the image on the TV to the audio from
a connected home theater. You do not
need to use this setting when
connecting the TV to a Philips home
theater.

- [Audio out offset]: Adjust the setting
for audio output delay. Available if

[Audio out delay] is switched on.

Audio format

If an analog TV channel broadcaster streams
stereo audio in multiple formats, you can
select an audio format.

1. Press

.

2. Select [Setup] > [Channel settings] >
[Mono/Stereo].

3. Select a setting, then press OK.

Reset picture and sound

You can restore the default picture and
sound settings, while the channel installation
settings remain the same.

1. While you watch TV, press

.

2. Select [Setup] > [TV settings] > [General

settings] > [Factory settings], then press
OK.

3. Select [OK], then press OK.
All TV settings (except for channel settings)

are reset to the default factory settings.

Channels

Automatic installation

When the TV was switched on for the first
time, a full installation of channels was
performed.

To change your language, country, and
reinstall all available TV channels, you can run
this full installation again.

Start installation
Note: If you are prompted to enter a code,

enter '8888'.

1. Press

2. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.

3. Select your country, then press OK.

4. Select your network, then press OK:

• [Antenna]: Access free-to-air antenna

• [Cable]: Access cable transmissions.

5. Follow the onscreen instructions to select
other options, if any.
The start menu for channel search is
displayed.

.

transmissions.

EN 20

English

6. Select [Start], then press OK.

7. Once the channel search is complete,
select [Finish], then press OK.

Tip: Press LIST to see the channel list.
Note: When digital TV channels are found,

the list of installed channels may display
empty channel numbers. You can rename
these channels.

Install digital channels

If you know the channel frequency of the
channels you want to install, you can search
and store digital channels one by one. For
best results, contact the service provider.

1. Press

.

2. Select [Setup] > [Channel settings] >
[Channel installation].

3. Select [Digital: Reception test] > [Search
channel], then press OK.

4. Press the Numeric buttons to enter the
channel frequency.

5. Select [Search], then press OK.

6. When the channel is found, select [Store],
then press OK.

Update channel list

1. Press .

2. Select [Setup] > [Search for channels] >
[Update channels], then press OK.

3. Follow the onscreen instructions to
update the channels.

Copy channels

ATTENTION: This feature is intended for

dealers and service personnel.
You can copy channel lists from one Philips

TV to another through a USB storage device.
You do not need to search for channels or
install them again on the second TV. The
channel list file is small enough to fit on any
USB storage device.

What you need
Two Philips TVs that have these properties:

• The same country setting

• The same year range

• The same hardware type, as indicated

by the sticker on the back of the TV
(for example TPM10.1L.LA)

• Compatible software versions
Note: If you are prompted to enter a code,

enter '8888'.
Step 1: Check the country setting

1. Switch on the first TV (with the channels
that you want to copy to the second TV).

2. Press .

3. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The country menu is displayed.

4. Make a note of the current setting.

5. Press

6. Press [Cancel] to exit.

.

Step 2: Copy channel list to USB

1. Connect a USB storage device to the first
TV (with the channels installed on it).

2. Press .

3. Select [Setup] > [Channel settings].

4. Select [Channel installation] > [Copy

channel list] > [Copy to USB], then press
OK.

The channel list is copied to the USB storage
device.

5. Disconnect the USB storage device.

Step 3: Copy channels to a TV with no
channels installed

1. Switch on the second TV, on which you
want to copy the channel list.
Initial installation starts.

2. Follow the onscreen instructions and
select the same country as the TV whose
channel list you want to copy.

3. Skip the search for channels.

4. Connect the USB storage device.

5. Press

.

6. Select [Setup] > [Channel settings].

7. Select [Channel installation] > [Copy

channel list] > [Copy to TV], then press
OK.

The channel list is copied to the TV.

8. Disconnect the USB storage device.

EN 21

Step 3: Copy channels to a TV with
pre-installed channels

1. Switch on the second TV, on which you
want to copy the channel list.

2. Press .

3. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The country menu is displayed.

4. Make sure that the country setting is the
same as the first TV.

5. Press

.

6. Press [Cancel] to exit.

7. If the country setting is different, reinstall
the second TV to match the country setting
of the first TV. See Change your TV settings
> Reset all (Page 24).

8. Connect the USB storage device to the
second TV.

9. Press

.

10. Select [Setup] > [Channel settings].

11. Select [Channel installation] > [Copy

channel list] > [Copy to TV], then press
OK.

The channel list is copied to the second TV.

12. Disconnect the USB storage device.

Language settings

Menu language

1. While you watch TV, press .

2. Select [Setup] > [TV settings] > [General
settings] > [Menu language].

3. Select a menu language from the list, then
press OK.

Note:
If you have selected [Alternate audio] for
analog channels, select between:

• [Main]: Primary audio language or

• [SAP]: Secondary audio language

Closed captions

You can display closed captions at all times
or only when the TV is muted.

Note: Digital TV interactive applications are
not accessible when closed caption text is
switched on.

• Not all TV programs, commercials and

features include closed captioning
information. See your local TV program
listings about channels with closed
captions. The captioned programs are
typically listed with service marks, such
as 'CC', in the TV listings.

Switch on closed captions

1. While you watch TV, press

2. Select [Closed captions].

3. Select [On], then press OK.
Select type of closed captions

1. While you watch TV, press

2. Select [Caption service].

3. Select the correct type of closed captions,
then press OK.

OPTIONS.

OPTIONS.

Audio language

If the TV channel broadcasts multiple or dual
audio languages, you can select your
preferred audio language.

1. While you watch TV, press OPTIONS.

2. For digital channels, select [Audio

language]. For analog channels, select
[Alternate audio]. Press OK to confirm your

selection.

3. Select from the available languages, then
press OK.

EN 22

English

Universal access settings

Switch on

Some digital TV broadcasters provide special
audio and subtitle features for people who
are hearing or visually impaired. You can
switch these features on or off.

1. Press

.

2. Select [Setup] > [TV settings] > [General
settings].

3. Select [Universal access] > [On] or [Off],
then press OK.

Set audio feedback

When you press a button on the remote
control or TV, you can set the TV to play a
beep.

1. While you watch TV, press

2. Select [Universal access] > [Key beep] >

[On], then press OK.

OPTIONS.

Other settings

TV demo

You can watch a demo to find out more
about the features on this TV.

1. While you watch TV, press

2. Select [Setup] > [Watch demos], then
press OK.

3. Select a demo, then press OK.

Home mode

Some TV settings may not be available in
Shop mode. To make sure that the correct
TV settings are applied, set the TV to Home

mode.

1. While you watch TV, press .

2. Select [Setup], then press OK.

3. Select [TV settings] > [General settings]
> [Location].

4. Select [Home] or [Shop], then press OK.

5. Restart the TV.

.

Update software

Check version

1. Press .

2. Select [Setup] > [Software settings] >
[Current software info], then press OK.

The current software version is displayed.
Caution: Do not install a lower version of

software than the current version installed
on your product. Envision cannot be held
liable or be made responsible for problems
caused by a software downgrade.

You can update the software using a USB
storage device.

Update with USB

What you need

• A USB storage device that has at least

256 megabytes of storage space, is FAT
or DOS formatted, and has its write
protection disabled.

• Access to a computer with a USB

connector and Internet access.

• A file archiver program that supports

the ZIP file format: for example,
WinZip® for Microsoft® Windows®,
or StuffIt® for Macintosh®.

Note: Do not use a USB hard drive.
Download the latest software

1. Connect the USB flash drive to your
computer.

2. On your computer, launch a browser such
as Internet Explorer® or Safari®, and see
www.philips.com/support.

3. Find your TV and locate the software and
drivers available for your TV set. The
software upgrade is available as a
compressed file (*.zip).

4. If the software version is higher than the
version on your TV, click the software
upgrade link.

5. Accept the license agreement and
download the ZIP file to the USB flash drive.

EN 23

Note: Some Internet browsers, such as
Mozilla® Firefox® or Google® Chrome®,
may download the ZIP file directly to your
computer. If this happens, copy the file to
your USB flash drive.

6. For Internet Explorer: Using a file
archiver, extract autorun.upg from the
downloaded ZIP file. Do not copy or place
the extracted file into a folder.

6. For Safari: When the download is
complete, autorun.upg is automatically
extracted from the ZIP file to your computer.
Copy the file to the USB flash drive. Do not
copy or place the file into a folder.

7. Eject and disconnect the USB flash drive
from the computer.

Upgrade the TV software
Caution:

• Do not switch off the TV or remove

the USB flash drive during the software
upgrade.

• If a power failure occurs during the

upgrade, do not remove the USB flash
drive from the TV. The TV continues
the upgrade as soon as power is
restored.

• If an error occurs during the upgrade,

retry the upgrade from the beginning. If
the error reoccurs, contact Philips TV
Consumer Care.

1. Remove all USB devices such as a Wi-Fi
adapter from the TV, then switch on the TV.

2. Connect the USB flash drive to the TV.
The software upgrade starts automatically.
The upgrade is complete when a notification
message appears on screen.

3. Before you restart the TV, disconnect the
USB flash drive from the TV.

4. Press
not press

on the remote control — do

more than once.
The TV switches off, then back on again. The
upgrade is complete.

5. To prevent accidental updates to the TV
software, reconnect the USB flash drive to
your computer and delete autorun.upg.

Reset all

You can reset all picture and sound settings
and reinstall all TV channels on your TV.

1. Press

2. Select [Setup] > [TV settings] > [General
settings] > [Reinstall TV], then press OK.

3. Follow the onscreen instructions.

.

EN 24

English

5 Connect your

TV

About cables

Cable quality

Before you connect devices to the TV, check
the available connectors on the device.
Connect the device to the TV with the
highest quality connection available. Good
quality connectors transfer picture and
sound better.

The connections shown in this user manual
are recommendations only. Other solutions
are possible. For more examples, visit

http://www.connectivityguide.philips.com.
Tip: If your device has only composite or

RCA connectors, use a composite (CVBS)
cable to connect the device to the CVBS/Y
connector on the TV.

HDMI

An HDMI connection has the best picture
and sound quality.

• An HDMI cable combines video and

audio signals. Connect HDMI for
high-definition (HD) TV signals, and to
switch on EasyLink.

• An HDMI Audio Return Channel (ARC)

connector allows output of TV audio to
an HDMI ARC compliant device.

• Connect HDMI cables shorter than 5

meters/16.4 feet.

CVBS

CVBS only transmits video. For sound, also
connect to Audio Left/Right.

CVBS connections provides standard picture
quality.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

VGA

You can connect VGA to display PC content
on the TV.

VGA only transmits video. For sound, also
connect to AUDIO IN.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:

EN 25

Connect antenna

Connect the antenna to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

EN 26

English

Connect devices

Blu-ray or DVD disc player

Connect the disc player with an HDMI cable to the TV.

Connect the disc player with a composite cable (CVBS) and an audio L/R cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

EN 27

TV receiver

Connect the digital TV receiver with an antenna cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

Connect the satellite or digital TV receiver with an HDMI cable to the TV.

EN 28

English

Connect the digital TV receiver with a composite cable (CVBS) and an audio L/R cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

Video recorder

Connect the recorder with an antenna cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

EN 29

 For PxG4109 - 32 to 50 inch TVs:

Connect the recorder with a composite cable (CVBS) and an audio L/R cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

EN 30

English

Game console

Connect the game console with an HDMI cable to the TV.

Connect the game console with a composite cable (CVBS) and an audio L/R cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

EN 31

Home theater

Connect an HDMI-ARC compliant home theater with an HDMI cable to the TV.

Connect the home theater with an HDMI cable and a coaxial audio cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

EN 32

English

Connect the home theater with a composite cable (CVBS) and an audio L/R cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

Digital camera

Connect the digital camera with a USB cable to the TV.

EN 33

Digital camcorder

Connect the digital camcorder with an HDMI cable to the TV.

Connect the digital camcorder with a composite cable (CVBS) and an audio L/R cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:
 For PxG4009 - 32 to 50 inch TVs:

 For PxG4109 - 32 to 50 inch TVs:

EN 34

English

Connect more devices

USB storage device

Connect the USB hard drive with a USB cable to the TV.

Connect the USB flash drive with a USB cable to the TV.

Computer

Connect the computer with an HDMI cable to the TV.

EN 35

Connect the computer with a DVI-HDMI cable and an audio cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:

Connect the computer with a VGA cable and an audio cable to the TV.

 For PFG4309 - 40 inch TVs:
 For PHG41x9 - 23 to 28 inch TVs:

EN 36

English

Watch connected devices

Select a device

Before you can watch a device, connect the
device to the TV. See Connect your TV >

Connect devices (Page 27).
Select a device with SOURCES

1. Press

2. Select a device, then press OK.
Select a device from Home menu

1. Press

2. Select [Source], then press OK.

3. Select a device, then press OK.

Change device settings

Change the device type

You can change the device type to easily
access it from the Source menu.

1. Press

2. Select the device, then press [Device
type].

3. Select a suitable device type, then press

OK.
Rename a device

You can rename a device after it is
connected to the TV.

1. Press SOURCES.

2. Select the connector, then press
[Rename].

3. Use the onscreen keypad to enter a new
name.

4. When complete, select [Done], then
press OK.

Reset device settings
You can reset the type and name of the
device to default settings.

1. In the [Source] menu, select the device
and press

2. Select [Reset], then press OK.

SOURCES.

.

SOURCES.

OPTIONS.

Set up EasyLink devices

What you can do

You can get the most out of your
HDMI-CEC-compliant devices with Philips
EasyLink enhanced control features. Connect
your HDMI-CEC compliant devices through
HDMI to your TV and control them at the
same time with your TV remote control.

Note: Other brands describe HDMI-CEC
functionality differently. Some examples are
Anynet (Samsung), Aquos Link (Sharp) or
BRAVIA Sync (Sony). Not all brands are fully
compatible with Philips EasyLink.

After you switch on Philips EasyLink, the
following features are available:

One-touch play
When you play an HDMI-CEC compliant
device, the TV switches on from standby and
switches to the correct source.

One-touch standby
When you press
control, the TV and all HDMI-CEC
compliant devices switch to standby mode.

Auto switch off inactive devices
If a HDMI-CEC compliant device has been
inactive for some time, it switches to standby
mode.

EasyLink remote control
You can control multiple HDMI-CEC
compliant devices with your TV remote
control.

System audio control
If you connect an HDMI-CEC compliant
device that includes speakers through the
HDMI ARC connector, you can choose to
hear the TV audio from those speakers
instead of the TV speakers.

Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link to retain
picture quality.

on the TV remote

EN 37

Maximize display for subtitled video
Some video subtitles can create a separate
subtitle bar under the video, which limits the
video display area. To maximize the video
display area, you can switch on auto subtitle
shift and display the subtitles on the video
image.

What you need

• Connect a HDMI-CEC compliant

device to the TV. You can connect
more than one HDMI-CEC device. See
Connect your TV > Connect devices
(Page 27).

• Configure each HDMI-CEC compliant

device properly.

• Switch on EasyLink.
Switch on EasyLink

1. Press .

2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].

3. Select [EasyLink] > [On], then press OK.

Control devices

If you connect multiple HDMI-CEC devices
that support this setting, you can control all
such devices through the TV remote control.

Note: This is an advanced setting. Devices
that do not support this setting cannot
respond to the TV remote control.

1. Press

2. Select [Setup] > [TV settings] > [General

settings] > [EasyLink] > [EasyLink remote
control].

3. Select [On] or [Off], then press OK.
Tips:

• To switch back to TV control, press

• To control another device, press ,

.

then select [Watch TV].

then select the device from the Home
menu.

EasyLink buttons
You can control HDMI-CEC compliant
devices with these buttons on the TV
remote control:

•

: Switch the TV and the connected

device on or to standby.

• Play buttons: Control video or music

play.

• Numeric buttons: Select a title, chapter

or track.

• OK: Start, pause or resume play on the

connected device, activate a selection,
or access the device menu.

: Display the TV Home menu.

•

Switch off connecting devices
You can also set the TV to switch off the
connecting HDMI-CEC compliant devices if
they are not the active source. The TV
switches the connecting device to standby
after 10 minutes of inactivity.

1. Press

.

2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].

3. Select [Auto switch off devices] > [On],
then press OK.

Select speaker output

If a connected device is HDMI Audio Return
Channel (HDMI ARC) compliant, you can
output TV audio through an HDMI cable.
Additional audio cables are not required.
Make sure you connect the device to the
HDMI ARC connector on the TV. See
Connect your TV > About cables > HDMI
(Page 25).

Switch on HDMI ARC

,

1. Press

2. Select [Setup] > [TV settings] > [Sound]
> [Advanced] > [HDMI side - ARC].

3. Select one of the following, then press
OK.

• [On]: Hear the TV audio through the

• [Off]: Hear the TV audio through the

.

connected HDMI-ARC compliant
device.

TV speakers, or through a device
connected through the digital audio out
connector.

EN 38

English

Note: Make sure that all HDMI-CEC settings

are properly set up on the connected device.
Set up TV speakers

1. Press

.

2. Select [Setup] > [TV settings] > [Sound]
> [Advanced] > [TV speakers].

3. Select an option, then press OK:

• [Off]: Switch off TV speakers.

• [On]: Switch on TV speakers.

• [EasyLink]: Switch off TV speakers, and

stream TV audio to a connected
HDMI-CEC audio device.

• [EasyLink autostart]: When a

HDMI-CEC audio device is connected,
automatically switch off TV speakers
and stream TV audio to the device.

Change TV audio streaming
You can switch audio between TV speakers
and a connected amplifier at any time.

1. Press

OPTIONS.

2. Select [Picture and sound] > [Speakers].

3. Select one of the following, then press
OK.

• [TV]: On by default.

Stream TV audio through TV and the
connected HDMI-CEC audio device
until the connected device switches to
system audio control. TV audio is then
streamed through the connected
device.

• [Amplifier]: Stream audio through the

connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continues to stream from
the TV speakers. If [EasyLink autostart]
was selected, the TV prompts the
connected device to switch to system
audio mode.

Retain picture quality

If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link.

Switch on Pixel Plus Link

1. Press

.

2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].

3. Select [Pixel Plus Link] > [On], then press

OK.

Maximize video display

Some subtitles create a separate subtitle bar
under the video that limits the video display
area. To maximize the video display area,
you can switch on auto subtitle shift. The
subtitles then display over the video image.

Switch on auto subtitle shift

1. Press .

2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].

3. Select [Auto subtitle shift] > [On], then
press OK.

EN 39

6 Troubleshooting

General issues

The TV does not switch on:

• Disconnect the power cable from the

power outlet. Wait for one minute
then reconnect it.

• Make sure that the power cable is

securely connected.

When you are turning the TV on, off or to
standby, you hear a creaking sound from
the TV chassis:

No action is required. The creaking sound is
due to the normal expansion and
contraction of the TV as it cools and warms
up. This does not affect performance.

The TV does not respond to remote
control or TV controls when switched on:

The TV requires some time to start up.
During this time, the TV does not respond
to the remote control or TV controls. This is
normal behavior.

If the TV continues to be unresponsive to
the remote control, view the remote control
sensor through a digital camera -- if you
press any button on the remote control and
notice red flickering at the sensor, the
remote control is working but the TV may
need to be checked by Philips TV Consumer
Care. This troubleshooting procedure is not
applicable to remote controls that are paired
wirelessly with the TV.

When the TV is in standby, a startup splash
screen is displayed, then TV returns to
standby mode:

This is normal behavior. When the TV is
disconnected and reconnected to the power
supply, the startup screen is displayed at the
next startup.
To switch on the TV from standby, press
on the remote control or press any key on
the TV.

The standby light on the TV blinks red:
Disconnect the power cable from the power
outlet. Wait until the TV cools down before
you reconnect the power cable. If the
blinking reoccurs, contact Philips TV
Consumer Care.

The TV audio is in the wrong language:
Change your audio language by pressing

OPTIONS, then select [Audio language]

or [Alternate audio].
The TV menu is in the wrong language:

Change the menu to your preferred
language.
For more information, see Change your TV

settings > Language settings > Menu
language (Page 22).

You forgot the 4-digit code to unlock the
channel blocking feature (child lock):

Enter ‘8888’.
You want to upgrade your TV software:

Visit www.philips.com/support and
download the latest software package for
your TV. Software installation instructions
and release notes indicating what's been
updated are also available at the site. Full
instructions on how to upgrade your TV

software are also available at Change your

TV settings > Update software (Page 23).

Channel issues

You want to install TV channels:
See Change your TV settings > Automatic
installation (Page 20) for instructions on

installing analog or digital channels.

Previously installed channels do not appear
in the channel list:

Make sure that the correct channel list is
selected.

No digital channels were found during the
installation:

• See the technical specifications to make

sure that your TV supports SATVD-T
or SBTVD-T in your country.

• Make sure that all cables are properly

connected and that the correct
network is selected.

EN 40

English

Picture issues

The TV is on, but there is no picture or the
picture is distorted:

• Make sure that the antenna is properly

connected to the TV.

• Make sure that the correct device is

selected as the display source.

• Make sure that the external device or

source is properly connected.

There is sound but no picture:
Make sure that the picture settings are set
correctly.

There is poor TV reception from an
antenna connection:

• Make sure that the antenna is properly

connected to the TV.

• Loud speakers, unearthed audio devices,

neon lights, high buildings, and other
large objects can influence reception
quality. If possible, try to improve the
reception quality by changing the
antenna direction or moving devices
away from the TV.

There is poor picture quality from
connected devices:

• Make sure that the devices are

connected properly.

• Make sure that the picture settings are

set correctly.

The TV did not save your picture settings:
Make sure that the TV location is set to

Home. You can change and save settings in
this mode.

The picture does not fit the screen - it is
too big or too small:

Change to a different picture format.

The picture format keeps changing with
different channels:

Instead of the picture format [Auto zoom],
select a different picture format.

The picture position is incorrect:
Picture signals from some devices may not fit
the screen correctly. Check the signal output
of the device.

An "e-sticker" banner displaying
information appears on the TV display:

The TV is in [Shop] mode. To remove the
e-sticker, set the TV to [Home] mode, then
restart the TV. See Change your TV settings

> Other settings > Home mode (Page 23).
The computer display on the TV is not

stable:

• Make sure that your PC uses the

supported resolution and refresh rate.
See Specifications > Display
resolutions (Page 43).

• Change the TV picture format to

[Unscaled].

Sound issues

There is picture but no sound from the TV:

If no audio signal is detected, the TV
automatically switches the audio output
off — this does not indicate malfunction.

• Make sure that all cables are properly

connected.

• Make sure that the volume is not

muted or set to zero.

• Make sure that the TV speakers setting

is selected. Press
[Picture and sound] > [Speakers], and
then select [TV].

• Make sure that the TV audio output is

connected to the audio input on the
HDMI-CEC enabled or EasyLink
compliant home theater device. Sound
should be heard from the home theater
speakers.

• Some devices may require you to

manually enable HDMI audio output. If
HDMI audio is already enabled, but you
still do not hear audio, try changing the
digital audio format of the device to
PCM (Pulse Code Modulation). Refer
to the documentation accompanying
your device for instructions.

There is picture but sound quality is poor:
Make sure that the sound settings are
correctly set.

OPTIONS, select

EN 41

Connection issues

There are problems with HDMI devices:

• Note that HDCP (High-bandwidth

Digital Content Protection) support can
delay the time taken for a TV to display
content from an HDMI device.

• If the TV does not recognize the HDMI

device and no picture is displayed,
switch the source from one device to
another and back again.

• If there are intermittent sound

disruptions, make sure that output
settings from the HDMI device are
correct.

• If you use an HDMI-to-DVI adapter or

HDMI to DVI cable, make sure that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).

You cannot use EasyLink features:
Make sure that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMI-CEC
compatible.

If an HDMI-CEC compliant audio device is
connected to the TV and the TV does not
display any mute or volume icon when the
volume is muted, increased or decreased:

When a HDMI-CEC audio device is
connected this behavior is normal.

USB device content is not displayed:

• Make sure that the USB storage device

is set to Mass Storage Class compliant,
as described in the storage device's
documentation.

• Make sure that the USB storage device

is compatible with the TV.

• Make sure that the audio and picture

file formats are supported by the TV.

Audio and picture files on your USB
storage device do not play or display
smoothly:

The transfer performance of the USB
storage device may limit the data transfer
rate to the TV which causes poor playback.

Contact Philips

Warning: Do not attempt to repair the TV
yourself. This may cause severe injury,
irreparable damage to your TV or void
your warranty.

If are not able to resolve your problem, refer
to the frequently asked questions (FAQs) for
this TV at
can also consult and contribute to the Philips
TV community at
www.supportforum.philips.com.

If you wish to speak with or email a Philips
representative, contact the Philips TV
Consumer Care in your country. You can
find the contact details in the leaflet
accompanying this TV or at
www.philips.com/support.

Take note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.

www.philips.com/support. You

EN 42

English

7 Specifications

Power and reception

Product specifications are subject to change
without notice.

Power

• Mains power: AC 110-240 V~, 50-60

Hz

• Standby power consumption: < 0.5 W

• Ambient temperature: 5 to 40degree

Celsius

• For power consumption, see the

product specifications at

www.philips.com/support

Reception

• Antenna input: 75 ohm coaxial (F-type)

• TV system: PAL M, PAL N, NTSC M,

SATVD-T, SBTVD-T

• Video playback: NTSC, PAL

Display and sound

Picture / Display

• Display type: LED backlight Full HD

• Diagonal size:

- 58.4 cm / 23 inches

- 61 cm / 24 inches

- 71 cm / 28 inches

- 81 cm / 32 inches

- 99 cm / 39 inches

- 102 cm / 40 inches

- 119 cm / 47 inches

- 122 cm / 48 inches

- 127 cm / 50 inches

• Aspect ratio: 16:9 (widescreen)

• Panel resolution:

- For HD sets: 1360x768p @60Hz

- For FHD sets: 1920x1080p @60Hz

• Picture enhancement: Digital Crystal

Clear

• Perfect Motion Rate (PMR): 120 Hz
Sound

• Incredible Surround

• Clear Sound

• Mono / Stereo

.

• Output power (RMS) @ 10% THD:

- PFG4309 – 40 inch TVs: 10 W

- PFG4109 – 47 to 50 inch TVs: 20 W

- PxG41x9 – 23 to 40 inch TVs: 10 W

- PFG4009 – 48 inch TV: 16 W

- PxG4009 – 32 to 40 inch TVs: 10 W

Display resolutions

Computer formats - HDMI
(Resolution - refresh rate)

640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 X 720 - 60 Hz
1280 X 768 - 60 Hz
1360 x 768 - 60 Hz

For Full HD TV only:
1280 x 1024 - 60 Hz
1680 x 1050 - 60 Hz
1920 x 1080 - 60 Hz

Video formats
(Resolution - refresh rate)

480i - 60 Hz
480p - 60 Hz
576i - 50 Hz
576p - 50 Hz
720p - 50Hz, 60 Hz
1080i - 50Hz, 60 Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz

Multimedia

Supported multimedia connections
Note: Multimedia file names must not

exceed 128 characters.

• USB: Connect only those USB devices

that consume 500mA of power or less.

- NTFS, FAT 16 (Read only)

- FAT 32

Supported image files

• JPEG: *.jpg, *.jpeg, *.mpo, *.jps

• GIF (87a, 89a): *.gif

• PNG: *.png, * .pns

• BMP: *.bmp, *.dib

• JPS: *.jps

• PNS: *.pns

EN 43

Extensions

resolution

Rate (Mbps)

MPEG-1

1920x1080

25p, 30p, 50i, 60i

30

MPEG-2

1920x1080

25p, 30p, 50i, 60i

30

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

30

25p, 30p, 50p, 60p,

60i

MPEG-2

1920x1080

25p, 30p, 50i, 60i

30

MPEG-1 (L1&L2),

Dolby Pulse

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

30

MPEG-2

1920x1080

25p, 30p, 50i, 60i

30

MPEG-1 (L1&L2),

Digital Plus, Dolby Pulse

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

30

MPEG-2

1920x1080

25p, 30p, 50i, 60i

30

MPEG-1 (L1&L2),

Digital Plus, Dolby Pulse

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

30

25p, 30p, 50p, 60p,

60i

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

30

AAC/HE-AAC (v1%v2),

WMA, WMA-PRO

H.264

1920x1080 30

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

30

MPEG-1 (L1&L2),

WMA, WMA-PRO

MPEG-2

1920x1080

25p, 30p, 50i, 60i

20

MPEG-1 (L1&L2),

WMA, WMA-PRO

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

20

MPEG-1 (L1&L2),

WMA, WMA-PRO

MPEG-4 ASP

1920x1080

25p, 30p, 50i, 60i

30

25p, 30p, 50p, 60p,

60i

Extensions

resolution

(kHz)

Rate (Mbps)

.mp3

MP3

- - 48

384

MPEG-1,2,2.5 L3

.wma

.asf

WMA (V2 up to

V9.2)

.wma

WMA Pro

- - 96

768

WMA, WMA Pro

.wav (PC)

LPCM

- - 192

768

LPCM

.alf (mac)
.alff (mac)

.aac

.m4a

.m4a

M4A

- - 48

1024

AAC, HE-AAC (v1&v2)

Supported audio/video formats

File

Container Video codec

Maximum

Max. Frame Rate (fps)

Max. Bit

Audio codec

.mpg

.mpeg

.vob

PS

H.264 1920x1080

.ts TS

H.264 1920x1080

.ts

.m2ts

.mts
.mt2

.ts

.m2ts

.mts

M2TS

TTS

AVCHD

H.264 1920x1080

H.264 1920x1080

.m4v M4V H.264 1920x1080

.mp4 MP4

WMV9/VC1 1920x1080 30p, 60i 30

.mkv

.mk3d

.asf

.wmv

MKV

ASF

H.264 1920x1080 30

WMV9/VC1 1920x1080 30p, 60i 20

25p, 30p, 50p, 60p,

60i

25p, 30p, 50p, 60p,

60i

25p, 30p, 50p, 60p,

60i

30

30

30

30

30

MPEG-1 (L1&L2),
MPEG-1,2,2.5 L3,

AAC/HE-AAC (v1&v2),

MPEG-1,2,2.5 L3,

AAC/HE-AAC (v1&v2),

Dolby Digital,

Dolby Digital Plus,

MPEG-1,2,2.5 L3,

AAC/HE-AAC (v1&v2),

Dolby Digital, Dolby

MPEG-1,2,2.5 L3,

AAC/HE-AAC (v1&v2),

Dolby Digital, Dolby

AAC

Dolby Digital,

Dolby Digital Plus,

MPEG-1,2,2.5 L3,

AAC/HE-AAC (v1&v2),

Dolby Digital,

Dolby Digital Plus,

MPEG-1,2,2.5 L3,

AAC/HE-AAC (v1&v2),

Dolby Digital,

Dolby Digital Plus,

.avi

,xvid

.3gp
.3g2

Supported audio formats

File

.mp4

EN 44

AVI MPEG-4 ASP 1920x1080 25p, 30p, 50i, 60i 4

3GP

Container Video codec

H.264 1920x1080

Maximum

Frequency

Max. Bit

- - 48 192

LPCM - - 192 768

AAC - - 48 1024

30

MPEG-1,2,2.5 L3,

AAC/HE-AAC (v1&v2),

Dolby Digital,

Dolby Digital Plus,

AAC/HE-AAC (v1&v2),

AMR

Audio codec

WMA

LPCM

AAC, HE-AAC (v1&v2)

English

Connectivity

For PFG4309 - 40 inch TVs:
For PHG41x9 - 23 to 28 inch TVs:

Rear

• TV ANTENNA: 75 ohm coaxial

• Composite and Audio (AV IN) :

CVBS/Y, Audio L/R

• HDMI 1

• AUDIO IN: DVI/VGA (stereo 3.5mm

mini-jack)

• VGA: PC input

• SPDIF OUT: Cinch (Digital Audio Out)

• SERV. U: Service port

Side

• USB

• HDMI 2 ARC (Audio Return Channel)

• Headphones: stereo 3.5mm mini-jack

For PxG4009 - 32 to 50 inch TVs:
Rear

• TV ANTENNA: 75 ohm coaxial

• Composite and Audio (AV IN) :

CVBS/Y, Audio L/R

• HDMI 1

• SPDIF OUT: Cinch (Digital Audio Out)

• SERV. U: Service port

Side

• USB

• HDMI 2 ARC (Audio Return Channel)

• Headphones: stereo 3.5mm mini-jack

For PxG4109 - 32 to 50 inch TVs:
Rear

• HDMI 1

• Headphones: stereo 3.5mm mini-jack

Side

• SERV. U: Service port

• Composite and Audio (AV IN) :

CVBS/Y, Audio L/R

• TV ANTENNA: 75 ohm coaxial

• SPDIF OUT: Cinch (Digital Audio Out)

• HDMI 2 ARC (Audio Return Channel)

• USB

EN 45

8 Index

A

age rating • 18
amplifier, select output • 38
audio language • 22
auto subtitle shift • 39
Auto switch off, devices • 38

C

cables • 25
channel list • 12
channel list, copy • 21
channels • 12
channels, favorites • 12
channels, hide or unhide • 12
channels, install (automatic) • 20
channels, install (digital) • 21
channels, logo • 12
channels, reinstall • 24
channels, rename • 12
channels, sort • 12
channels, switch • 12
channels, update • 21
child lock • 18
clock • 17
closed captions • 22
codecs, supported • 43
connect, computer • 35
connect, digital camcorder • 34
connect, digital camera • 33
connect, disc player • 27
connect, external hard disk • 35
connect, game console • 31
connect, home theater • 32
connect, recorder • 29
connect, TV receiver • 28

connect, USB device • 35
connected device, rename • 37
connectivity • 45
connectivity guide • 8
connectors • 25
contact Philips • 8
content rating • 18
CVBS, composite video • 25

D

demo • 23
devices, watch • 37

digital camcorder • 34
digital camera • 33
digital channels, install • 21
digital radio • 12
disc player, connect • 27
display resolutions • 43
display specifications • 43
DTVi • 15

E

EasyLink • 37
EasyLink, controls • 38
EasyLink, enable • 38
EasyLink, features • 37
EasyLink, onscreen control • 10
EasyLink, remote control • 38
EasyLink, TV speakers • 38
energy efficient settings • 6
EPG, broadcaster • 14
external hard disk • 35

F

favorite channels, list • 12

G

game console, connect • 31

EN 46

English

H

HDMI • 25
HDMI ARC • 25
home mode • 23
home theater, connect • 32

I

install channels, automatic • 20
Interactive TV • 15

K

Kensington lock • 5
key beep • 23

L

language, menu • 22
lock TV • 5

M

mode, home or shop • 23
Multimedia Home Platform (MHP) • 15
multimedia, play files • 14
multimedia, play options • 14
multimedia, supported formats • 43

O

online forum • 8

P

PC, display resolutions • 43
picture format • 13
picture settings • 19
picture settings, reset • 20
Pixel Plus link • 39
placement, stand or wall • 4
placement, tips • 4
play, USB files • 14
power specifications • 43

presets, picture and sound • 13
product support • 8
program guide, broadcaster • 14

R

recorder, connect • 29
reinstall • 24
remote control • 9
rename channels • 12
rename, connected device • 37

S

safety • 3
screen care • 4
sensors • 9
settings assistant • 19
settings, audio format • 20
settings, picture • 19
settings, sound • 20
shop mode • 23
sleep timer • 18
software, check version • 23
software, USB update • 23
sound settings • 20
sound settings, reset • 20
sound specifications • 43
source, select • 13
standby • 11
standby LED • 9
sustainability • 6
switch TV on, off • 11

T

trademarks and copyrights • 6
TV guide, broadcaster • 14
TV receiver, connect • 28
TV speakers, mute • 11

EN 47

U

universal access, enable • 23
USB, play files • 14

V

VGA • 25
volume • 11

EN 48

CERTIFICADO DE GARANTIA NO BRASIL

produto.

A Envision Indústria de Produtos Eletrônicos LTDA assegura ao proprietário
consumidor deste aparelho a garantia de 365 dias (90 dias obrigatórios mais
275 adicionais) contados a partir da data de entrega do produto, conforme

Esta garantia perderá sua validade se:

manual de instruções

diferentes das recomendadas no manual de instruções e/ou no produto.

rasurado.
Estão excluídos desta garantia defeitos decorrentes do descumprimento do manual de
instruções do produto, de casos fortuitos ou de força maior bem como aqueles causados por

do uso dos produtos em serviços não domésticos/residendais regulares ou em desacordo
com o uso recomendado.

ESTÃO EXCLUÍDAS DA GARANTIA ADICIONAL AS PILHAS OU

Envision

No Brasil, para informações adicionais sobre o produto, entre em contato com o CIC

ao consumidor www.philips.com.br/suporte, onde está disponível a lista completa e mais

Para atendimento fora do Brasil, contate a TP Vision local ou: TP Vision Europe B.V.
Prins Bernardplein 200, 1070 AE Amsterdam, The Netherlands

All registered and unregistered trademarks are the property of their respective owners.

Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V. and are used
under license from Koninklijke Philips N.V.
2014 © TP Vision Europe B.V. All rights reserved.
www.philips.com