Philips 42HFL7007D, 47HFL7007D, 55HFL5007D User Manual

EN User Manual
www.philips.com/welcome
Contents
1 Get started 3
TV tour 3 TV controls 4 Important information 5 Sustainability 9 Help and support 10
2 Use your TV 11
Watch TV 11 View program guide 13 Watch 3D 14 View media 15 Browse Smart TV 16 Interactive TV 17 Ambilight 18
3 Use more of your TV 20
Play games 20 View Teletext 21 Set locks and timers 22 Use EasyLink 23
4 Professional mode 26
What you can do 26 Enter and enable professional mode 26 Change professional setup settings 26 More professional setup settings 28 Change non-professional TV settings 29 Change channel settings 29 Channel installation 30 Change Smart Clone settings 30
5 Set up your TV 31
Power and reception 47 Display and sound 47 Display resolutions 47 Multimedia 48 Connectivity 49 Supported TV mounts 50
8 Index 51
Note for professional installers 31 Picture and sound 31 Channel settings 32 Language settings 33 Universal access settings 33 Other settings 34 Restore default settings 34
6 Connect your TV 35
About cables 35 Connect devices 36 Connect more devices 42 Watch a connected device 45
7 Product specifications 47
EN 2
English
1 Get started
TV tour
High Definition TV
Your TV is equipped with a High Definition (HD) display so you can watch HD video in these ways and more:
a Blu-ray disc player, connected with an
HDMI cable, playing a Blu-ray disc
an upscaling DVD player, connected
with an HDMI cable, playing a DVD disc
an over-the-air HD broadcaster
(DVB-T or DVB-T2 MPEG4)
a digital HD receiver, connected with
an HDMI cable, playing HD content from a cable operator
an HD game console, connected with
an HDMI cable, playing HD games
3D TV
Supported on XXHFL7007D only.
This is a 3D TV. You can watch 3D movies and programs in full HD resolution on this TV. When you start a 3D movie on a connected 3D Blu-ray disc player or tune into a TV channel that broadcasts 3D programs, the TV switches to 3D.
Read more in Use your TV > Watch 3D.
Media playback
If you connect your TV to a USB storage device, you can enjoy your movies, music, and pictures on a wide screen TV with excellent sound.
You can also connect your PC to the TV with an HDMI or VGA cable.
Program guides
You can find out what's on and what's coming up, with the now and next EPG (Electronic Program Guide), or eight day EPG.
EasyLink
If you connect your TV to HDMI-CEC (Consumer Electronic Control) enabled devices, such as a Blu-ray player or home theater, you can control them at the same time with one remote control. Simply switch on EasyLink after connection.
Ambilight
*Available on certain models only. Ambilight gives a more relaxed viewing
experience. It automatically adjusts the color and brightness of the light to match the TV picture.
Read more in Use your TV > Ambilight (Page 18).
Smart TV
You can make your TV the center of your digital life with the Smart TV suite of applications:
If you connect your TV to the Internet,
you can enjoy a wealth of streaming movies, pictures, music, and much more with Youtube and other Smart TV applications.
EN 3
TV controls
Rear controls
1. : Switch the TV on or to standby.
2. CH +/-: Switch to the next or previous
channel.
3. : Select a connected device.
4. +/-: Increase or decrease volume.
Sensors
1. Remote control sensor
Point the remote control at the sensor. Make sure that the line-of-sight between the remote control and the TV is not blocked by furniture or other objects.
Remote control
1. (Standby): Switch the TV on or to
standby.
2. SMART TV: Access Smart TV features.
3. MyChoice: Access customized menu.
4. ThemeTV: Access ThemeTV options.
5. GUIDE: Access TV Guide.
6. TV: Switch source to watch TV.
7. CHANNEL GRID: Access the TV
channel list.
8. SOURCE: Access a connected device.
9. CLOCK: Access the TV clock. Available on certain models only.
10. FORMAT: Change picture format.
EN 4
English
11. (Home): Access the Home menu.
12. OK: Confirm an entry or selection.
13. Play buttons: Control playback of media
files.
14. (Navigation buttons): Navigate through menus and select items.
15. LIST: Access the TV channel list.
16. ADJUST: Access TV settings.
17. INFO: Display information about
current activity.
18. OPTIONS: Access currently available options.
23. Color buttons: Select tasks or options. The buttons function according to the services offered by the broadcaster.
24. SUBTITLE: Switch subtitles on or off.
25. 0-9 (Numeric buttons): Select TV
channels or enter text.
26. TEXT: Switch teletext on or off.
EasyLink controls
Note: EasyLink controls are available when
the connected device is HDMI-CEC compliant.
With EasyLink controls, you can control your TV and other HDMI-CEC devices with one remote control.
Access EasyLink controls
1. While you view content from a connected HDMI-CEC device, press OPTIONS.
2. Select [Show device keys], then press OK.
3. Select the EasyLink control button, then press OK.
Read more on EasyLink in Use more of
your TV > Use EasyLink (Page 23).
Important information
19. (Back): Return to the previous menu
page or exit from a TV function.
20. CH - / CH +: Switch channels.
21. +/- (Volume): Adjust volume.
22. (Mute): Mute or restore audio.
Safety
Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply.
Risk of electric shock or fire!
Never expose the TV to rain or water.
Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
EN 5
Never place the TV, remote control or
batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times.
Never insert objects into the ventilation
slots or other openings on the TV.
Never expose the remote control or
batteries to rain, water or excessive heat.
Avoid force coming onto power plugs.
Ensure that the power plug is fully inserted into the power socket. Loose power plugs can cause arcing or fire.
When the TV is swiveled, ensure that
no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing.
To disconnect the TV from the mains
power, the power plug of the TV must be disconnected. When disconnecting the power, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
Risk of damage to the TV!
Two people are required to lift and
carry a TV that weighs more than 25kg or 55lbs.
When stand mounting the TV, use only
the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the combined weight of the TV and the stand.
When wall mounting the TV, use only a
wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. TP Vision Netherlands B.V. bears no responsibility for improper wall mounting that results in accident, injury or damage.
If you need to store the TV,
disassemble the stand from the TV. Never lie the TV on its back with the stand installed.
Before you connect the TV to the
power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.
Parts of this product can be made of
glass. Handle with care to avoid injury and damage.
Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children:
Never place the TV on a surface
covered by a cloth or other material that can be pulled away.
Ensure that no part of the TV hangs
over the edge of the surface.
Never place the TV on tall furniture,
such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support.
Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
The product/remote control may
contain a coin type battery, which can be swallowed. Keep the battery out of reach of children at all times!
Risk of overheating!
EN 6
English
Never install the TV in a confined
space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure that curtains or other objects never cover the ventilation slots on the TV.
Risk of injury, fire or power cord damage!
Never place the TV or any objects on
the power cord.
Disconnect the TV from the power
outlet and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable.
Risk of hearing damage!
Avoid using earphones or headphones
at high volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.
3D Health warning
Available for certain models only.
If you or your family has a history of
epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing.
To avoid discomfort such as dizziness,
headache or disorientation, we recommend not watching 3D for extended periods of time. If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) until your symptoms have disappeared. If symptoms persist, do not resume watching 3D without consulting a medical professional first.
Parents should monitor their children
during 3D viewing and ensure they do not experience any discomfort as mentioned above. Watching 3D is not recommended for children under six years of age as their visual system is not fully developed yet.
Screen care
Risk of damage to the TV screen!
Never touch, push, rub or strike the screen with any object.
Unplug the TV before cleaning. Clean the TV and frame with a soft
damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
To avoid deformations and color fading,
wipe off water drops as soon as possible.
Avoid stationary images as much as
possible. Stationary images are images that remain onscreen for extended periods of time. Stationary images include onscreen menus, black bars, time displays, etc. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.
Notice
2012 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. TP Vision Netherlands B.V. warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.
EN 7
TP Vision Netherlands B.V. cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
Terms of warranty
Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV yourself.
Use the TV and accessories only as
intended by the manufacturer.
The caution sign printed on the back of
the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips Customer Care for service or repairs.
Any operation expressly prohibited in
this manual, or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty.
Pixel characteristics
This LCD/LED product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.
CE compliance
This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/EC (EMC).
\\
Compliance with EMF
TP Vision Netherlands B.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
One of Philips’ leading Business Principles is
to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products.
Philips is committed to develop, produce and market products that cause no adverse health effects. TP Vision confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
Trademarks and copyrights
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
All other registered and unregistered trademarks are the property of their respective owners.
EN 8
English
Sustainability
Energy efficiency
This TV is designed with energy-efficient features. To access these features, press the Green button on the remote control.
Energy saving picture settings: You can
apply a combination of energy saving picture settings. While you watch TV, press the Green button and select [Energy saving].
Screen off: If you only want to listen to
audio from the TV, you can switch off the TV display. Other functions continue to operate normally.
End of use
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Ecolabel
Philips continuously focuses on lowering the environmental impact of our innovative products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, efficient use of energy, end-of-life instructions and product packaging.
This TV has been awarded the European Union Ecolabel for its environment-friendly qualities.
A TV that is awarded the Ecolabel, contains energy-efficient features. To access energy saving settings while you watch TV, press the Green button on the remote control.
EN 9
You can find detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at
www.philips.com.
EU energy label
The European Energy Label informs you on the energy efficiency class of the product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
On the label, you can find the energy efficiency class, the average power consumption of the product in use and the average energy consumption for 1 year. You can also find the power consumption values for the product on the Philips website for your country at www.philips.com/TV.
Chat online with our support personnel
(available in certain countries only)
Contact Philips
You can contact Philips Consumer Care in your country for support. The number is available in the leaflet accompanying this product, or online at
www.philips.com/support.
Before you contact Philips, write down the model and serial number of your TV. You can find this information on the back of your TV or on the TV packaging.
Help and support
Visit Philips website
Visit the Philips support website at
www.philips.com/support.
At the Philips support website, you can also:
Find answers to Frequently Asked
Questions (FAQ)
Download a printable PDF version of
this user manual
Email us a specific question
EN 10
English
2 Use your TV
Watch TV
Switch TV on or off
Switch the TV on
Connect the TV to the mains outlet
and press the mains power switch.
If the TV is in standby, press on the
remote control or on the rear panel of the TV.
Note: There is a short delay before the TV responds.
Tip: If you cannot find your remote control and want to switch on the TV from standby,
press CH - / CH + or on the rear panel of the TV.
Switch TV to standby Press on the remote control or on the rear panel of the TV. The remote control sensor on the TV switches to red.
Switch off the TV Turn off the mains power switch. The TV switches off.
Note: Though your TV consumes very little energy when it is in standby or switched off, it does use some energy. If you are not going to use the TV for an extended period of time, disconnect the TV from the mains plug.
Automatic switch off You can save energy with this TV's energy efficiency settings. The settings are enabled by default, so that if there is no user interaction (such as pressing a remote control button or a control on the rear panel) for four hours, the TV will automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green button on the remote control.
2. Select [Auto switch off], then press OK. A confirmation message is displayed.
Adjust TV volume
Increase or decrease the TV volume
Press +/- on the remote control. Press +/- on the side of the TV.
Mute or unmute the TV volume
Press to mute the TV. Press again to restore the volume.
Adjust headphone volume
EN 11
1. Press > [Setup] > [TV settings] > [Sound].
2. Select [Headphones volume], then press OK.
3. Press the Navigation buttons to adjust the volume.
Switch TV channels
Press CH +/- on the remote control or
TV.
Press the Numeric buttons to enter a
channel number.
Manage channel lists
After the channels are installed, you can manage them:
Rename channels Reorder channels Listen to digital radio
Rename channels You can rename the channels. The name appears when the channels are selected.
1. While you watch TV, press LIST. The channel list is displayed.
2. Select the channel to rename, then press OPTIONS.
3. Select [Rename], then press OK.
4. Press the Navigation buttons to select
each character, then press OK.
Tips:
You can press OK in the entry screen
to enable the Onscreen Keyboard.
Press [ABC] or [abc] to switch
between uppercase letter and lowercase letters.
5. Once complete, select [Done], then press OK to confirm.
6. Press to exit.
Reorder channels After the channels are installed, you can reorder the channel list.
1. While you watch TV, press LIST. The channel list is displayed.
2. Select the channel to reorder, then press OPTIONS.
3. Select [Reorder], then press OK.
4. Press the Navigation buttons to move the
highlighted channel to another location, then press OK.
5. Select one of the following options, then
press OK.
[Insert]: Insert the channel into the
desired location.
[Swap]: Swap location with another
channel.
6. Once complete, press OPTIONS, and
then select [Exit].
Listen to digital radio If digital radio channels are available, you can listen to them. They are installed automatically when you install TV channels.
1. While you watch TV, press LIST. The
channel list is displayed.
2. Press OPTIONS.
3. Select [Select list] > [Radio] , then press
OK.
4. Select a radio channel, then press OK.
Select a source
View from Home menu
After you add the new device to the Home menu, you can select its icon to start using it.
1. Press .
2. Select the device icon from the Home
menu.
3. Press OK to confirm.
EN 12
English
View from Source menu
You can also press SOURCE to display a list of connector names. Select the connector that connects the device to the TV.
1. Press SOURCE.
2. Press the Navigation buttons to select a connector in the list.
3. Press OK to confirm.
Use smart settings
Your TV comes with smart picture and sound settings. You can apply these settings or customize them.
Select your preferred picture setting
1. While you watch TV, press ADJUST.
2. Select [Smart picture].
3. Select one of the following settings, then press OK:
[Personal]: Apply your personalized
picture settings.
[Vivid]: Rich and dynamic settings, ideal
for daytime viewing.
[Natural]: Natural picture settings. [Cinema]: Ideal settings for movies. [Game]: Ideal settings for games. [Energy saving]: Settings that conserve
the most energy.
[Standard]: Default settings that suit
most environments and types of video.
[Photo]: Ideal settings for photos. [Custom]: Customize and store your
own picture settings.
Select your preferred sound setting
1. While you watch TV, press ADJUST.
2. Select [Smart sound].
3. Select one of the following settings, then press OK:
[Personal]: Apply your personalized
sound setting.
[Standard]: Settings that suit most
environments and types of audio.
[News]: Ideal settings for spoken audio,
such as the news.
[Movie]/[3D movie]*: Ideal settings for
movies.
[Game]: Ideal settings for games. [Drama]: Ideal settings for drama
programs.
[Sports]: Ideal settings for sports.
* For certain models only.
Change picture format
You can change the picture format to suit the video source.
1. Press ADJUST.
2. Select [Picture format], then press OK.
3. Select a picture format, then press OK to
confirm. The available picture formats depend on the
video source:
[Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible). Recommended for minimal screen distortion but not for HD or PC.
[Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal screen distortion but not for HD or PC.
[Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not recommended for HD or PC.
[Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or PC.
[Wide screen]: Stretch 4:3 format to
16:9.
[Unscaled]: Provide maximum detail for
PC. Only available when PC mode is selected in the picture menu.
View program guide
From broadcaster
You can view information about digital TV channels using program guides provided by broadcasters. This information can include:
Channel schedules for the day ('Now
and next') or up to 8 days, if supported by your broadcaster
Synopsis of programs
EN 13
Note: Program guides are available in certain countries only.
Set program guide Before you use the program guide, check these settings:
1. Press .
2. Select [Setup] > [TV settings] > [Preferences] > [Programme guide].
3. Select [From the broadcaster], then press
OK. Access the TV program guide
1. Press .
2. Select [Programme guide], then press
OK.
Use TV program guide options
You can customize the displayed information to:
Remind you when programs start Display only preferred channels
1. In the program guide, press OPTIONS.
2. Select an option, then press OK:
[Change day]: Select the day to display. [More info]: Display program
information.
[Search by genre]: Search TV programs
by genre.
Do not use the 3D glasses for any
purpose other than watching 3D TV.
To experience the best 3D effect while you watch 3D programs:
Watch the TV away from direct
sunlight.
Sit at a height where the center of the
TV screen is at your eye level.
Sit at a distance that is at least three
times the width (w) of the TV screen. Do not sit more than 6m away.
Watch 3D
What you need
Supported on XXHFL7007D only.
Your TV is a 3D TV. Before you watch 3D, read the health warning information in Get
started > Important information > 3D Health warning (Page 7).
To watch 3D on this TV, you need the Philips Easy 3D passive glasses that are included with this TV. You can purchase additional Philips 3D glasses PTA416 (sold separately) from your local dealer.
Note:
Passive 3D glasses from other
manufacturers may not work or may offer less than optimal 3D viewing.
EN 14
Watch content
Select a source with 3D
For 3D discs:
1. Play the disc on a 3D Blu-ray disc player
that is connected to the TV HDMI connector.
2. Press , then select the 3D Blu-ray disc
player. For 3D TV programs:
Select [Watch TV] and switch to a TV channel that broadcasts 3D content.
Switch on 3D The first time the TV detects a broadcast 3D signal, an onscreen message prompts you to choose your preference.
If you want the TV to switch to 3D
automatically, select [Automatic].
If you want to be notified first, select
[Notify].
English
If you don't want to be notified, select
[No 3D].
Start 3D
The TV detects when 3D is available and prompts you to put on your 3D glasses to start watching. If the TV cannot detect the 3D signal due to a missing 3D signal tag, it displays images that overlap.
To switch the overlapping images to 3D, change the 3D format.
1. Press ADJUST.
2. Select [3D].
If the TV displays pictures that overlap
vertically, select [3D - Side by side].
If the TV displays pictures that overlap
horizontally, select [3D - Top /
bottom].
Switch off 3D
If you switch to another channel or a connected device, the TV switches back to 2D.
While you watch a 3D program, you can switch off 3D.
1. Press ADJUST.
2. Select [3D depth on/off] > [Off], then press OK. The program is displayed in 2D, showing only the left side of the 3D picture.
View media
What you can do
You can play videos, photos, and music on your TV from a USB device connected to the TV.
Play files from USB
If you have photos, videos or music files on a USB storage device, you can play the files on TV.
Caution:
TP Vision is not responsible if the USB
storage device is not supported, nor is it responsible for damage or loss of data in the device.
Do not overload the USB port. If you
connect a USB storage device that consumes more than 500mA power, make sure that it is connected to its own external power supply.
View USB contents
1. Connect the USB device to the USB
connector on the TV.
2. Press , select [Browse USB], then press
OK.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons on the remote
control to control play.
Play options
Watch video
Press the Navigation buttons to select a video file, then press OK.
Press to pause video. Press / to search backward or
forward within a video.
Press CH - / CH + to skip to the
previous or next video.
Press and hold to exit the content
browser.
Video playback options While you play video, press OPTIONS to access the following video options:
[Stop]: Stop playback. [Repeat]: Repeat a video. [Shuffle on] / [Shuffle off]: Enable or
disable random play of videos.
[Show info]: Display the file
information.
Listen to music Press the Navigation buttons to select a music track, then press OK.
Press to pause. Press / to search backward or
forward within a music track.
Press CH - / CH + to skip to the
previous or next track.
Press and hold to exit content
browser.
EN 15
Music playback options Press OPTIONS to access or exit the following music options:
[Stop]: Stop audio play. [Repeat]: Repeat a track or an album. [Play once]: Play the track once. [Shuffle on] / [Shuffle off]: Enable or
disable random play of tracks.
[Show info]: Display the file
information.
View pictures Press the Navigation buttons to select a picture, then press OK to start the slideshow.
Press Navigation buttons to search for a picture.
Press and hold to exit the content
browser.
Picture slideshow options Press OPTIONS to access or exit the following picture options:
[Show info]: Display the file
information.
[Stop]: Stop slideshow. [Rotate]: Rotate the file. [Repeat]: Repeat the slideshow. [Play once]: Play the file once. [Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in the slideshow.
[Slideshow speed]: Set the display time
for each picture in the slideshow.
[Slideshow transition]: Set the
transition from one picture to the next.
[Set as Scenea]: Set the selected
picture as wallpaper on TV. See Use
more of your TV > View Scenea > Load TV wallpaper.
Read newspaper headlines Watch and rent videos Check weather forecasts Catch up with TV programs that you
missed
Find out more on Smart TV services from the Smart TV forum website,
www.supportforum.philips.com.
Note:
Smart TV services and apps vary from
country to country.
Availability of catch-up TV apps and
their TV programs is subject to the country setting of your TV. To find out which TV programs are available, access the TV program guide within the app.
Smart TV displays one page at a time, in
full screen.
Certain websites may not display
completely. Functions that require plug-ins may be unavailable.
TP Vision Netherlands B.V. bears no
responsibility regarding the content and the quality of the content provided by the content service providers.
What you need
1. On your home network, connect the TV
to the Internet.
2. On your TV, configure Smart TV.
3. (Optional) On your PC, register with
Philips to enjoy exclusive benefits and receive updates on product information. You can register at any time.
Connect the TV to the Internet
1. On your home network, connect a router
with a high-speed connection to the Internet.
2. Switch on the router.
3. Install the network.
Browse Smart TV
What you can do
With Internet Applications (apps), which are specially adapted Internet websites for your TV, you can enjoy these features and more:
EN 16
English
Start Smart TV
1. Press , select [Smart TV], and then press OK.
2. Follow the onscreen instructions to complete registration.
You can also press SMART TV on the remote control to access Smart TV.
Reload page If a page does not load correctly, press
OPTIONS, then select [Reload page]. View security info
To view security information about a page, press OPTIONS, then select [Security
info].
Access Smart TV Applications (Apps)
You can access apps through the Smart TV home page. The icons on this page represent the apps installed on your TV.
Press the Navigation buttons to select
an app for access, then press OK to confirm.
Browse Internet websites with Internet
apps.
Read the Smart TV quick guide on the
Smart TV home page for more information.
Access websites
1. Select an Internet app, then press OK.
2. Select the web address field, then press OK.
A keyboard appears on the screen.
3. Press the Navigation buttons and OK to enter each character of the web address.
Tip: You can also use the Numeric buttons on the TV remote control to enter a web address.
Zoom page To zoom in and out on an Internet page, do the following:
1. Press OPTIONS, then select [Zoom page].
2. Use the slider bar to set the enlargement.
3. Use the Navigation buttons to jump between highlighted items and scroll through an Internet page.
Scroll pages Press P+ and P- to scroll up and down on a web page.
Interactive TV
What you can do
With interactive TV, you can view additional information or entertainment pages provided by digital TV broadcasters. You can experience true interactivity by responding directly to the digital content.
Note: You cannot download files to your TV with this feature.
Broadcasters use various interactive TV systems such as:
iTV (Interactive TV - MHEG) MHP (Multimedia Home Platform) DTVi (Digital TV interactive)
Visit the broadcaster's website for more information to see which interactive system is available in your country.
Here are some examples of interactive activities you can enjoy:
View information about TV programs Join a quiz or contest Play games Shop online Pay for a video-on-demand (VOD)
program
Vote Chat
What you need
To enjoy this service, you need the following:
digital channels with interactive services a wired or wireless home network,
connected through a Universal Plug and Play router (uPnP).
For network connection, see Connect your TV > Network and the Internet.
EN 17
Loading...
+ 37 hidden pages