Philips 42PFL7762D, 52PFL7762D, 32PFL7762D, 32PFL7962D, 52PFL7432 User Manual
...
Register your product and get support at
www.philips.com/welcome
USER MANUAL
Model
www.philips.com/support
Serial
Country Number Tariff
Austria 0810 000205 0.07/min
Belgium 078250145 0.06/min
Czech Rep 800142840 free
Denmark 3525 8759 local
Finland 09 2311 3415 local
France 0821 611655 0.09/min
Germany 01803 386 852 0.09/min
Greece 0 0800 3122 1280 free
Hungary 0680018189 free
Ireland 01 601 1777 local
Italy 840320086 0.08/min
Luxemburg 40 6661 5644 local
Netherlands 0900 8407 0.10/min
Norway 2270 8111 local
Poland 0223491504 local
Portugal 2 1359 1442 local
Slovakia 0800004537 free
Spain 902 888 784 0.10/min
Sweden 08 5792 9100 local
Switzerland 0844 800 544 local
UK 0870 900 9070 local
This information is correct at the time of press.
For updated information, see www.support.philips.com
Contents
Introduction .......................................... 3
Safety ..................................................... 4
Television keys and connectors .......... 5
Getting started ..................................... 6
Mounting the TV on a wall ........................... 6
Connecting the aerial and mains ................. 6
How to switch your TV on .......................... 6
Putting batteries in the remote control .... 6
Remote control functions ................... 7
Switching the TV on for the fi rst
time ....................................................... 9
Going back to the Installation menu .......... 9
Understanding the information
banner ................................................. 10
Viewing or listening to digital TV and
radio ..................................................... 11
Changing the order of stored channels .. 11
Checking for new TV channels or radio
stations ............................................................ 11
Setting up TV and radio channels .... 12
Adding new channels or stations to your
list ..................................................................... 12
Reinstalling all channels ............................... 12
Installing digital channels manually ............ 13
Testing your TV reception ......................... 13
Selecting your language and
location ................................................ 14
Setting your language and location ........... 14
Resetting the language to your preferred
language ........................................................... 14
Submenu options for language ................... 14
Submenu options for location ................... 15
Restricting access to digital
channels ............................................... 16
Opting to use a pin code ............................ 16
Changing your pin code .............................. 16
Options for restricting access to digital
channels .......................................................... 16
Using the Common Interface slot ............ 16
Setting up lists of favourite channels 17
Updating software automatically ..... 18
Obtaining the software version ................. 18
Information about software downloads .. 18
Downloading new software ....................... 18
Using the Options menu .................. 19
Getting programme listings .............. 20
Using digital teletext ......................... 21
Analogue teletext in digital mode ............. 21
Using conditional access .................... 22
Tuning analogue channels
automatically ...................................... 23
Tuning analogue channels manually 24
Renumbering channels ...................... 25
Naming channels ................................ 26
Selecting your favourite channels .... 27
Adding or removing channels from your
list of favourites ............................................. 27
Setting the timer ................................ 28
Blocking channels (Parental
Control) ............................................... 29
Creating a pin code for parental control 29
Blocking and unblocking selected channels
.......................................................................... 29
Changing your pin code for parental
control ............................................................. 30
Blocking or unblocking all channels .......... 30
1
Locking the side controls (Child
Lock) .................................................... 31
Enjoying Ambilight ............................. 32
Switching Ambilight on and off .................. 32
Confi guring Ambilight settings................... 32
Adjusting picture and sound settings 33
Picture settings ............................................. 33
Sound settings ............................................... 33
Using Smart Picture and Smart
Sound ................................................... 35
Using Smart Picture ..................................... 35
Using Smart Sound ....................................... 35
Picture Formats ................................. 36
Using teletext ..................................... 37
Using the TV in High Defi nition
mode .................................................... 39
Connecting HD equipment to your TV .. 39
Adjusting picture or sound settings in HD
mode .............................................................. 39
Picture settings in HD mode ..................... 39
Sound settings in HD mode ....................... 39
Confi guring the TV in HD mode .............. 40
Displaying in native 1080 mode ................. 40
Supported formats ....................................... 41
Using Auto HDMI ......................................... 41
HDMI 1.3a CEC ............................................ 41
Troubleshooting ................................. 43
Environmental Information .............. 45
Information for users in the UK ....... 46
Using the TV as a PC Monitor .......... 42
Connecting a PC to your TV ..................... 42
Adjusting picture or sound settings in PC
mode .............................................................. 42
Picture settings in PC mode ....................... 42
Sound settings in PC mode ........................ 42
Confi guring the TV in PC mode ............... 42
Supported PC resolutions .......................... 42
2
Introduction
Congratulations on your purchase and
welcome to Philips!
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
This manual contains information about how
to install and operate your TV.
If you still have problems after reading
this manual, call your Local Philips Customer
or Service Centre. The telephone numbers
and addresses are given in the worldwide
guarantee booklet supplied with the TV.
Product information
The model and serial number can be found
at the rear of the TV, on left side of the TV,
and on the packaging.
Product features
Note: Available in selected models
Caring for the screen
1.
Do not remove the protective sheet
until you have completed the stand or
wall mounting and connections.
2.
Use the soft cloth that is provided to
clean the front of the TV.
3.
Do not use a cloth that is dripping with
water. Do not use acetone, toluene
or alcohol to clean the TV. As a safety
precaution, unplug the power cord from
the mains when you clean the set.
Do not touch, push or rub or strike
4.
the screen with anything hard as this
may scratch or damage the screen
permanently.
X
3
Safety
Two people are required to lift and
1.
carry a TV that weighs more than 25
kilogrammes. Improper handling of the
TV can cause serious injury.
If you place the TV set on a surface,
2.
ensure the surface is level and that it can
withstand the weight of the TV.
Mounting the TV on the wall requires
3.
special skill that should only be
performed by a qualified personnel.
You should not attempt to do the work
yourself. Philips bear no responsibility
for improper mounting or mounting that
results in accident or injury.
This TV is compatible with the VESA
4.
wall mounting standard. Please contact
your local electronics retailer for a VESA
compliant bracket to wall mount this TV.
Before you mount your TV on a wall,
ensure the wall is suitable to carry the
weight of the TV.
Wherever you place or mount the
5.
TV, ensure that air can circulate freely
through the ventilation slots. Do not
place the TV in a confined space.
Do not place naked flame sources such
6.
as lighted candles close to the TV.
Do not expose the TV or the batteries
7.
of the remote control to heat, direct
sunlight, rain, or water.
X
Do not place a vessels filled with water
8.
on top of or near to the TV. Spilling
water into the TV can result in electric
shock. If you spill water into the TV,
do not operate the TV. Immediately
X
4
disconnect the TV from the mains and
have the TV checked by a qualified
technician.
Do not touch any part of the TV, power
9.
lead, or aerial lead during lightning
storms.
Do not leave the TV in standby mode
10.
for an extended period of time. Instead,
disconnect the TV from the mains.
The TV set is always connected to the
11.
mains. You can disconnect the TV from
the mains by doing one of the following
tasks:
• unplugging the mains cord located at
the back of TV set
• unplugging the mains plug from the
mains socket outlet
Pull the power cord by the plug - do not
pull on the power cord.
Ensure that you always have easy access
12.
to the mains cord or the mains plug to
disconnect the TV from the mains.
Ensure the power cord is fully inserted
13.
into the TV mains socket and the wall
socket.
If the TV is mounted on a swivel base
14.
or swivel arm, ensure no strain is placed
on the power cord when the TV is
swivelled. Strain on the power cord can
loosen connections and cause arcing or
fire.
Verify that the mains supply voltage in
15.
your home corresponds to the voltage
printed on the sticker at the rear of the
TV.
Television keys and connectors
1.
. POWER
To switch the TV on and off. To
disconnect from the mains, remove the
mains cord from the mains socket at the
back of the TV or remove the mains plug
from the wall socket.
2.
- PROGRAM +
To select a channel.
3.
MENU
To display or close menus.
4.
- VOLUME +
To increase or decrease volume.
5.
Audio Video
To connect to a camera or camcorder.
6.
Headphones
To connect headphones. The mute
function does not work when
headphones are plugged in.
Side HDMI
7.
To connect to peripheral equipment,
including high-definition equipment.
8.
9.
10.
11.
12.
13.
Common Interface (CI) slot
To connect a Conditional Access card
such as a cable card or smartcard.
TV Aerial
To connect to the aerial plug.
HDMI
To connect to peripheral equipment,
including high-definition equipment.
Some models have three HDMI
connectors.
EXT 4 Y/C and EXT 4 YPbPr
To connect to peripheral equipment.
Only one video connection can be used
at a time.
EXT 1 (RGB) and EXT 2 (CVBS/SVIDEO)
To connect peripheral equipment.
For service use (do not insert the
headphones here).
5
m
Getting started
Mounting the TV on a wall
This TV is compatible with the VESA wall
mounting standard. Please contact your local
electronics retailer for a VESA compliant
bracket to wall mount this TV.
Insert the cables into the TV before you
mount it on the wall.
Ensure that there is a distance of at least 30
mm between the wall and the back of the
TV. For sets with subwoofer, an additional
10mm is required for optimal sound effect.
40m
How to switch your TV on
To switch the TV on, press the POWER
key on the side controls. A blue indicator
light comes on and after a few seconds the
screen lights up.
If the TV set remains in standby mode,
the indicator light remains red. Press the
PROGRAM +/- key on the side controls or
press the P +/- key on the remote control.
Connecting the aerial and mains
Insert the aerial plug and the mains cord
firmly into their respective socket at the
bottom of the TV before connecting them
into the wall socket.
6
Putting batteries in the remote
control
Insert the batteries into the remote control,
ensuring that the + and - ends of the
batteries are aligned correctly. The correct
alignment is indicated inside the casing of the
remote control.
Remote control functions
1
2
3
4
5
6
7
8
9
10
11
12
13
1.
2.
3.
Standby
To put the TV in standby mode or to
switch the TV on. Alternatively, press
to , P +/-, or .
Teletext
For information about using teletext, see
Using teletext on page 37.
Sound mode
To change programmes to Mono from
Stereo and Nicam Stereo.
- For bilingual programmes, select Dual
å or Dual » as indicated during the
broadcast.
- In digital mode, ù displays the list
audio languages.
of
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Subtitles
To activate or deactivate subtitles in
digital mode.
Teletext (Dual Window)
For information about using teletext, see
Using teletext on page 37.
Analogue menu
To enter or exit the TV menus in
analogue mode.
Î, ï, Í, Æ
To select and adjust menu options.
u OK
To confirm selections and access the
program list in digital mode.
Analogue/Digital
To switch between analogue and digital
mode.
+ VOL –
To increase or decrease volume.
Mute
To turn the speaker sound on or off.
to Numerical keys
To access programme numbers directly.
For a two digit programme number,
enter the 2nd digit soon after the first
digit, before the dash disappears.
Screen information
- In digital mode, to display or exit the
information banner. For information see
Understanding the information banner on
page 10.
- In analogue mode, to display or
remove the programme number, the
sound mode, the clock and the remaining
time of the sleep timer.
7
Remote control functions (cont.)
14
15
16
17
18
19
20
21
22
23
24
14.
Picture format
To change the picture format. For more
information about see Picture Formats on
page 36.
15.
Source List
To display the list of sources on which
you can view your TV or your peripheral
equipment.
16.
Teletext colours
For information about using teletext, see
Using teletext on page 37.
18.
Cancel
To exit teletext in digital mode. Use this
key if there are no colour key to exit
teletext.
19.
Digital menu
To display or exit from the digital menu
in digital mode.
20.
Programme listings
To obtain programme listings. For
information, see Getting programme
listings on page 20.
21.
+ P – Programme
To select the previous or next TV
channel.
22.
BACK
To toggle between the previously viewed
channel and the current channel. This
key can also be used to edit or move
back when you are naming channels.
23.
Smart picture and
sound
To toggle between predefined picture
settings and sound settings. For
information, see Using Smart Picture and
Smart Sound on page 35.
24.
Ambilight
Applies only to TVs equipped with the
Ambilight feature.
- ON/OFF: To switch ambilight on or off.
- MODE: To select the ambilight mode.
17.
Options
For information about using options, see
Using the Options menu on page 19.
8
Switching the TV on for the first time
When you turn the TV on for the first time,
the TV is in digital mode and the following
menu appears on screen.
Setup
Language
Country
Time Zone
Service Scan
Select your preferred language
Selecting your language, country and
time zone
Press the Æ key to enter Language,
1.
and press the Î or ï key to select your
preferred language.
Press the
2.
selection.
Press the Î or ï key to highlight
3.
Country or Time Zone, and press
the Æ key to enter Country or Time
Zone.
Note: If you select the wrong country,
the channel numbering will not conform
to the standard for your country. You
might receive fewer or no services.
Press the Î or ï key to select your
4.
preferred Country or Time Zone.
Press the
5.
selection.
Press the ï key to select Service Scan.
6.
Press the
7.
The TV searches for the available
analogue and digital channels.
If no digital channels are detected, press
8.
u key to confirm your
u key to confirm your
u key to start the installation.
key to switch to analogue mode.
English
Español
Français
Italiano
Magyar
11:28
Going back to the Installation
menu
This procedure resets both the digital and
analogue modes to the factory default
settings.
On the side controls of the TV set, press
1.
and hold down the MENU key for 5
seconds. A menu appears on the screen.
Select your language, country and time
2.
zone as if this is the fi rst time you have
turned on the TV.
9
Understanding the information banner
When you select a digital programme, an
information banner is displayed at the top
of the screen. The banner disappears after a
few seconds.
preset
number
channel name programme title remaining time
programme
start and
end time
2 11:00-11:45 10:38
BBC 2 Snooker Minutes left : 22
symbols
TXT
of programme
clock
The information banner contains the preset
number, channel name, programme title,
programme start time, programme end time,
clock, and the remaining time for the current
programme.
Description of the symbols on the
information banner
i More information about this
•
programme is available.
To display more information, press the
key once. Press the key a
second time to remove the information.
Subtitling is available
•
To access subtitles, press the key.
Alternatively, press the
key to
access the options menu and then select
subtitles.
TXT
•
Analogue teletext is available in
digital mode.
ù Other languages are available
•
To select other languages press the
key. Press the key to access the
options menu.
u The colour of the symbol (red, green,
•
yellow or blue) indicates the selected list
of favourite channels.
Note: A white symbol u appears if
the channel is stored in one or more of
the list of favourites channels which are
currently not activated.
10
Viewing or listening to digital TV and radio
Press the green key to confirm your
Changing the order of stored
channels
You can change the order of the digital
channels and radio stations that you have
stored.
If you are in analogue mode, switch to
1.
digital mode by pressing the
the remote control.
2.
Press the key to display the setup
menu.
3.
Press the ï key to select Installation,
and press the Æ key twice to select the
Service lists menu.
Setup
Installation
Service lists
Service setup
Test reception
Rearrange services
View new TV channels
Listen to new Radio stations
key on
11:28
8.
choice. The exchange is complete.
9.
Repeat the previous steps until all of the
channels are in the required order.
10.
Press the Í key to return to the
previous menu.
11.
Press the
key to exit the menu.
Checking for new TV channels or
radio stations
You can check for the availability of TV
channels or radio stations that have been
launched by the broadcaster after you have
installed the TV.
If you are in analogue mode, switch to
1.
digital mode by pressing the
the remote control.
key on
Manage service lists
Close
4.
Press the Î or ï key to select
Rearrange services, and press the Æ
key.
Set up
Installation>Service lists
Rearrange services
View new TV channels
Listen to new Radio stations
Change preset location of services
Press the Î or ï key to highlight the
5.
1 _
2 _
3 _
4 _
5 _
6 _
7 _
8 _
9 _
10 _
Close
channel you want to select.
Press u key to activate the channel. To
6.
uninstall the selected channel, press the
red key.
Press the Î or ï key to select the new
7.
channel number.
11:28
2.
Press the
key to display the setup
menu.
Press the ï key to select Installation,
3.
and press the Æ key twice to select the
Service lists menu.
Press the Î or ï key to select View
4.
new TV channels or Listen to new
Radio stations.
If new services are available, press the
5.
Æ key to enter into the list of services,
and press the Î or ï key to move
through the list. For information about
how to add the new services to your
list of favourite channels, see Adding new
channels or stations to your list, on page 12.
Press the Í key to return to the
6.
previous menu.
Press the key to exit the menu.
7.
11
Setting up TV and radio channels
Press the Í key to return to the
Adding new channels or stations to
your list
You can search for new TV channels or
radio stations that have been launched by
the broadcaster after the initial installation.
If you are in analogue mode, switch to
1.
digital mode by pressing the
key on
the remote control.
2.
Press the key to display the setup
menu.
3.
Press the ï key to select Installation,
and press the Æ key.
Setup
Installation
Service lists
Service setup
Test reception
Install and manage services
Select Service setup, and press the Æ
4.
Add new services
Reinstall all services
Manual install services
Close
11:28
key.
Press Æ to add new services, and press
5.
u key to activate the installation.
the
Setup
Installation Service setup
Add new services
Reinstall all services
Manual Install services
Scan for new services
Search
TV channels found
Radio stations found
Other services found
Store
Discard
Close
11:28
A search begins. Any new channels are
added to the channel list menu. The
percentage of the installation that has
been completed and the number of
channels found is displayed.
When the search is complete, press the
6.
u key to accept the new services.
7.
previous menu.
Press the
8.
Reinstalling all channels
This menu allows you to reinstall all the
digital TV channels and radio stations.
If you are in analogue mode, switch to
1.
digital mode by pressing the
the remote control.
2.
Press the key to display the setup
menu.
3.
Use the ï key to select Installation,
and press the Æ key.
4.
Select Service setup, and press the Æ
key.
5.
Select Reinstall all services, and press
the Æ key.
Setup
Installation Service setup
Reinstall all services
Manual Install services
Reinstall will remove all service settings
Press the u key to start the installation.
6.
A search is for digital services is started.
The services are stored automatically.
When the search is complete, the menu
indicates the number of digital services
found.
Press the
7.
Press the Í key to return to the
8.
previous menu.
Press the key to exit the menu.
9.
key to exit the menu.
Add new services
Search
TV channels found
Radio stations found
Other services found
Store
Discard
Close
u key to store the services.
key on
11:28
12
Setting up TV and radio channels (cont.)
Press the ï key to select Installation,
Installing digital channels manually
You can manually scan services by keying in
the frequency of your target channel.
1.
If you are in analogue mode, switch to
digital mode by pressing the
key on
the remote control.
2.
Press the key to display the setup
menu.
3.
Select Service setup, and press the Æ
key.
4.
Select Manual install services, and
press the Æ key.
Setup
Installation > Service setup
Add new services
Reinstall all services
Manual install services
Manual install services
5.
Press the to keys to key in
Frequency
Network name
Signal quality
Signal strength
Services found
Store
Discard
Close
11:28
the frequency of your target channel, and
press
u key to start the search.
6.
When the search is complete, press the
u key to accept the new service.
7.
Press the Í key to return to the
previous menu.
8.
Press the
key to exit the menu.
2.
and press the Æ key.
Setup
Installation
Service lists
Service setup
Test reception
Test signal quality
.
Press the ï key to select Test
3.
reception, and press the Æ key. The
programme frequency, the network
name, the signal quality, and the signal
strength are displayed.
Press the Æ key to enter the
4.
Frequency, and press the
keys to enter the frequency of the digital
channel that you want to test.
- Press the Æ key to move to the next
character space.
- If the test reception indicates that the
signal strength is poor, adjust or update
your aerial. Contact a professional aerial
installer for best results.
5.
After keying in the frequency, press the
u key to exit Frequency.
Press the Í key to return to the
6.
previous menu.
Press the key to exit the menu.
7.
11:28
Frequency
Network name
Signal quality
Signal strength
Close
to
Testing your TV reception
This menu allows you to check the strength
of the signal that you are receiving through
your aerial.
From the digital mode, press the
1.
key to display the setup menu.
13
Selecting your language and location
You can select your preferred language,
country and time zone.
Setting your language and location
If you are in analogue mode, switch to
1.
digital mode by pressing the
key on
the remote control.
Press the key to display the setup
2.
menu.
Press the ï key to select Preferences
3.
and press the Æ key.
Setup
Preferences
Language
Location
Select your preferred language
Select Language or Location, and
4.
Audio
Subtitle / Teletext
Subtitling Mode
Subtitling for hearing impaired
System
Close
11:28
press the Æ key.
Press the Î or ï key to select an
5.
option, and press the Æ key to enter
into its sub-menu.
Select your values, and press the
6.
u or
Í key to exit.
Press the Í key to return to the
7.
previous menu.
8.
Press the
key to exit the menu.
Resetting the language to your
preferred language
If you have selected the wrong language and
do not understand the selected language,
perform the following steps to bring you
back to your preferred language.
Press the key again to display
2.
menu.
Press the ï key to select the second
3.
item in the menu.
Press the Æ key to enter into the next
4.
level of the menu.
Press the Æ key followed by the ï key
5.
to select the fifth item on the menu.
6.
Press the Æ key to enter into the next
level of the menu.
7.
Press the Î or ï key to select your
preferred language.
8.
Press the u key to confirm your
selection.
9.
Press the key to exit the menu.
Submenu options for language
This list describes the submenu options for
choosing your languages.
Audio: To select the audio sound
•
language.
Subtitle/Teletext: To select the
•
subtitle and teletext language.
Subtitling Mode: To set subtitles to
•
off, on, or auto. In auto mode, subtitles
are displayed when they are supplied
with the original audio transmission.
Subtitles for hearing impaired: To
•
activate or deactivate the subtitling for
hearing impaired. This feature is available
only if it is supplied in the broadcast.
System: To select the menu language.
•
Press the key to exit the menu.
1.
14
Loading...