Philips 26HFL5561V-27, 26HFL5561L-27, 42HFL5581L-27, 52HFL5581V-27, 42HFL5581V-27 User Manual

...

Download

www.philips.com/welcome

26HFL5561L/27

26HFL5561V/27

32HFL5561D/27

32HFL5561L/27

32HFL5561V/27

37HFL5581D/27

37HFL5581L/27

37HFL5581V/27

42HFL5581L/27

42HFL5581V/27

52HFL5581L/27

EN Quick Start Guide

52HFL5581V/27

1 How to use this guide

The Quick Start Guide helps you install the Philips commercial television, as quickly as possible. It contains the necessary information to install the TV and congure the settings. Read and understand the instructions in the Quick Start Guide before you use your TV. For detailed information on additional features, download the user manual by selecting your TV model at www.philips.com/hospitality. The Quick Start Guide contains the following information:

• contents of the box

• standalone installation instructions

• conguration of channel, advanced and SmartFeatures settings

• cloning of data

• troubleshooting

OSS declaration

Open source software

This television contains open source software. Philips BU Hospitality hereby offers to deliver or make available, upon request, for a charge no more than the cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code on a medium customarily used for software interchange. To obtain the source code, write to: Philips Singapore Pte Ltd. Philips BU Hospitality Software Development Manager 620A Lorong 1, Toa Payoh Singapore 319762 This offer is valid for three years after the date of purchase of this product.

En glish

Energy savings mode

This TV is congured in Energy Savings mode.

• This mode will disable the side control keys of the T V and result in a

longer turn on time. To optimize the TV performance, adjust the LOW POWER STANDBY setting in TV SETUP menu.

• For more details, refer to the information on conguring the LOW

POWER STANDBY feature (see ‘Congure SmartPower settings’ on page

7).

2 The contents of the box

The box contains the following items:

• which secure the TV stand to the furniture of the hotel room to prevent unauthorized removal or theft

• desk-to-stand screws (2)*

• desk-to-stand washers (2)*

• desk-to-stand secure groove nuts (2)*

• which secure the TV stand to the T V to prevent unauthorized removal or theft

• stand-to-TV secure screws (4)*

• stand-to-TV cross-head screws (4)*

• which secure the TV stand to the furniture of the hotel room with non-drilling sur faces

• Industrial strength double sided tape (4)*

• the TV

• the TV stand

• Quick Start Guide

• 2-pin power cord

• Guest remote control*

Note

• * The items are available in selected models only.

Note

• The tools required to secure the screws are not included in the box.

Contact your Philips authorized agent or dealer in NAF TA to obtain the tools.

26”/32”/37”/42”/52” models

x 2

(Available in selected models only)

x 4

(Available in selected models only)

x 4

x 2

x 4

(Available in selected models only)

POWER

SLEEP

SMART

GUEST

DCM

SETUP

TEXT

RECALL

4 5 6

2 3

COMMUNICATION >

USE CHANNEL TABLE

YES

CURRENT RING DIGITAL SETUP

SETUP

CABLE TUNING YES

CHANNEL INSTALL

CONFIGURATION

SMARTCLONE

> >

RING2

LANGUAGE

ENGLISH

AUTO INSTALL TV

TV A NTENNA

Cabl e

POWER

SLEEP

GUIDE

SMART

GUEST

DCM

SETUP

TEXT

RECALL

RESET

4 5 6

2 3

A/CH

SETUP

3 Standalone installation

This section describes how to install the TV channels automatically.

1 Connect the RF signal from the wall socket to the T V. 2 Plug the 2-pin power cord into the power outlet.

• Press Power on the setup remote control.

En glish

3 Set the switch at the side of the setup remote control to SETUP.

Note

• The setup remote control is not included in the box. Contact your Philips

authorized agent or dealer to obtain the remote control.

4 Turn the TV on.

• Press POWER at the side of the TV.

5 Press M on the setup remote control to display the setup menu. 6 Press to select AUTO INSTALL TV.

7 Press to start the automatic installation of channels.

» After the channels are installed, you can change the settings of

the channels, picture, sound, and volume.

CHANNEL TV 2 INPUT TUNER

LABEL

( )

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

CHANNEL LOGO

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

DIGITAL

YES

RINGS

HIGH DEFINITION

RINGS

SPORTS NEWS

YES

KIDS

YES

MOVIES

YES

NETWORK

YES

ADULT

YES

LIFESTYLE

YES

OTHERS

YES

CHANNEL RINGS

(1X)(2 )(3 )(4 )

4 Change the channel

INPUT TUNER

DIGITAL

RINGS

LABEL

( )

MUTE NONE

CHANNEL INSTALL

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

CHANNEL LOGO

CHANNEL

TV 2

CHANNEL TV 2 INPUT TUNER

RINGS LABEL

( )

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

CHANNEL LOGO

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

> 2

DIGITAL

YES

settings

This section describes how to change the channel settings.

Manual installation of analog channels

1 Press M on the setup remote control to display the setup menu. 2 Press to select CHANNEL INSTALL > CHANNEL.

4 Press 0-9 (Numeric buttons) to enter the physical channel

number.

5 Press to set the MPEG PROGRAM NUMBER to a particular

program in the physical channel.

6 Press 0-9 (Numeric buttons) to enter the program number.

Note

• You can also select DIGITAL CH SCROLL and press to select the

digital channel numbers.

Select a ring

1 Press M on the setup remote control to display the setup menu. 2 Select the channel that you want to save in a ring and the input

source (see ‘Manual installation of analog channels’ on page 4).

3 Press to select CHANNEL INSTALL > RINGS.

3 Press 0-9 (Numeric buttons) to select a channel.

• For cable mode, select a number between 01 - 250.

• For antenna mode, select a number between 02 - 250.

4 Press to select INPUT, and then press to select the source

of input.

Manual installation of digital channels

1 Press M on the setup remote control to display the setup menu. 2 Press to select CHANNEL INSTALL > DIGITAL > YES.

4 Press to select a ring number.

» A ashing red dash appears next to the selected ring.

3 Press to set the RF CHANNEL NUMBER to the physical

channel number.

5 Press to save or remove a channel from the ring.

» The ring is marked by an ‘X’ when the channel is saved in it.

6 Press to select a category option (HIGH DEFINITION,

SPORTS, NEWS, etc) to save the channel.

7 Press to select YES to save the channel to this category or

NO to remove the channel.

SWITCH ON CHANNEL TV 2

SWITCH ON PIC FMT

WIDESCREEN POWER ON VOLUME INDICATOR

SWITCH ON VOLUME

WELCOME MESSAGE

LAST STATUS

YES

SWITCH ON SMARTGUIDE

YES

SWITCH ON / OSD

CHANNEL DISPLAY

ALL

COLOR 38

SHARPNESS

50 TINT ACTIVE CONTROL

PICTURE / SOUND

CONTRAST

BRIGHTNESS

YES

TREBLE

BASS

BALANCE

AVL

5 Configure advanced

PICTURE / SOUND >

CONTROL

> SMARTFEATURES AUDIO FEATURES

CONFIGURATION

SECURITY

SWITCH ON / OSD

> CC / V-CHIP

HOTEL INFORMATION

settings

This section describes how to congure the advanced settings for the TV such as volume, channel, picture format, power mode, picture, sound, security, control, ratings, and hotel information.

Access the conguration menu

1 Press M on the setup remote control to display the setup menu. 2 Press to select CONFIGURATION.

3 Press to select one of the following to congure the

settings:

• SWITCH ON/OSD: Sets the default value for settings such as volume, channel, picture format, and power mode. These values are used when the TV is switched on.

• PICTURE/SOUND: Sets the picture and sound settings for the TV.

• SECURITY: Sets the level of security by conguring the settings such as, TV lock, RC lock, decryption control and V-track.

• CONTROL: Sets the control settings such as ESP, Smart Guide, and SmartWindow.

• SMARTFEATURES: Sets the SmartPower, USB breakin, SmartGuide Category, Smar tUpdate, and software download settings.

• AUDIO FEATURES: Sets the correct audio source.

• CC/V-CHIP: Sets the closed caption settings and ratings.

• HOTEL INFORMATION: Set the hotel information including hotel name and room number.

3 Press to set the following values:

• WELCOME MESSAGE: Sets or clears a welcome message.

• SWITCH ON CHANNEL: Sets a channel that is displayed when the TV is turned on.

• SWITCH ON SMARTGUIDE: Sets the display of Smar tGuide categories screen when the TV is turned on.

• SWITCH ON VOLUME: Species the volume at which the TV is turned on.

• SWITCH ON PIC FMT: Sets the picture format that is used to display.

• POWER ON: Sets the power mode that is used when the TV is turned on.

• VOLUME INDICATOR: Sets the display of volume indicator.

• CHANNEL DISPLAY: Sets the display of channel number and channel name on the screen.

Congure the picture and sound settings

1 Press M on the setup remote control to display the setup menu. 2 Press to select CONFIGURATION > PICTURE/

SOUND.

En glish

Congure the switch-on settings

1 Press M on the setup remote control to display the setup menu. 2 Press to select CONFIGURATION > SWITCH ON/

OSD.

3 Press to adjust a setting for your TV.

Congure the control settings

DIGIT TIMEOUT 3.0

SOURCE MENU ITEM PIC FMT MENU ITEM SMARTWINDOW MENU ITEM

CONTROL

3 DIGIT ENTRY

ESP

OFF

NO NO NO

SMART GUIDE

MIN VOLUME

MAX VOLUME

 PressMonthesetupremotecontroltodisplaythesetupmenu.

1 2 Press toselectCONFIGURATION > CONTROL >

MAX VOLUME.

3 Press toadjustthemaximumvolumefortheTV. 4 Press toadjustothercontrolsettingsfromthismenu.

Note

• SMARTWINDOWisavailableonselectedmodelsonly.

LOW POWER STANDBY

SMARTFEATURES

SMARTPOWER

OFF

AUTOSENSE

USB BREAK-IN

SW DOWNLOAD

SMARTUPDATE

SMARTGUIDE CATEGORIES

6 Configure SmartFeatures

LOW POWER STANDBY

SMARTFEATURES

SMARTPOWER

OFF

AUTOSENSE

USB BREAK-IN

SW DOWNLOAD

SMARTUPDATE

SMARTGUIDE CATEGORIES

Congure SmartGuide Categories

settings

Congure SmartPower settings

Philips continuously focuses on lowering the environmental impact of its consumer products by adopting energy efcient ways of power management. This section describes how to select a setting for maximum power savings.

1 Press M on the setup remote control to display the setup menu. 2 Press to select CONFIGURATION > SMARTFEATURES.

This section provides information to congure SmartGuide Categories icons. Guests can access these icons by pressing the CHANNEL GUIDE button on the guest remote control to display the SmartGuide Categories screen. Refer to the previous chapter for information to assign TV channels to categories (see ‘Select a ring’ on page 4).

1 Press M on the setup remote control to display the setup menu. 2 Press to select CONFIGURATION > SMARTFEATURES

> SMARTGUIDE CATEGORIES.

En glish

3 Press to select one of the following to congure the

settings:

• SMARTPOWER: Sets a power saving mode. Select one of the following :

• OFF: Rich and dynamic settings, ideal for daylight use.

Disables power savings.

• LOW: A natural picture setting. Achieves low power savings.

• MEDIUM: Ideal settings for watching movies. Achieves

medium power savings.

• HIGH: Applies low-energy settings. Achieves highest

possible power savings.

• AUTOSENSE: Reduces the TV’s power consumption according to the room’s ambient light. Select YES to enable the TV ’s builtin ambient light sensor.

• LOW POWER STANDBY: Uses minimum power when the TV is in standby mode.

Note

• If LOW POWER STANDBY is set to YES,

• the TV can only be switched on with a remote control. Please ensure the

remote control is always available. The control buttons at the side of the TV will not be able to switch on the T V.

• If LOW POWER STANDBY is set to YES, the TV will be congured to

the optimal energy saving mode whenever the TV is switched to standby mode. As a result, the T V will take a little longer to switch on again. If you need a fast switch on time, select NO.

3 Press to select one of the following to congure the

settings:

• CHANNEL GUIDE KEY: Sets the default screen that will be shown when you press the CHANNEL GUIDE button on the remote control. Select between SMARTGUIDE categories or CHANNEL LIST screen.

• HIGH DEFINITION: Enables or disables the high denition icon in the SmartGuide Categories screen.

• SPORTS: Enables or disables the sports icon in the SmartGuide Categories screen.

• NEWS: Enables or disables the news icon in the Smar tGuide Categories screen.

• KIDS: Enables or disables the kids icon in the Smar tGuide Categories screen.

• MOVIES: Enables or disables the movies icon in the Smar tGuide Categories screen.

• NETWORK: Enables or disables the network icon in the Smar tGuide Categories screen.

• ADULT: Enables or disables the adult icon in the SmartGuide Categories screen.

• LIFESTYLE: Enables or disables the lifestyle icon in the Smar tGuide Categories screen.

• OTHERS: Enables or disables the others icon in the SmartGuide Categories screen.

Congure SmartSecure settings

1 Press M on the setup remote control to display the setup menu. 2 Press to select CONFIGURATION > SECURITY >

SMARTSECURE.

3 Press toenableordisableSmartSecure.

REMOTE CONTROL LOCK

SECURITY

STANDARD

KEYBOARD LOCK

SMARTSECURE

DECRYPTION CONTROL

4 Press toselecttheSmar tSecurechannel.

» TheTVchecksfortheSmartSecureIDwhenturnedon.

5 Press toadjustothersecuritysettingsonthismenu.

Note

• SMARTSECUREisavailableonselectedmodelsonly. • SMARTSECUREmustbeusedwithaPhilipsSmartGateway(PSG)

device.DonotenableSMARTSECUREunlessthePSGhasbeen conguredatyourlocation.FormoreinformationonthePSG,contact yourPhilipsauthor izedagentordealer.

SMARTCLONE

SOURCE

RF TO TV

CABLE TUNING RF CHANNEL NUMBER

YES

7 Clone TV configuration

USB TO TV

SMARTCLONE

SOURCE

USB

TV TO USB

data

You can copy the conguration data from a TV to a USB storage device or vice versa. This enables you to bypass the setup menu and congure multiple TVs by simply using the USB storage device. This section describes how to clone the conguration data from a TV to a USB storage device or from a USB storage device to a TV.

Clone data using a USB storage device

1 Press M on the setup remote control to display the setup menu. 2 Press to select SMARTCLONE > SOURCE. 3 Press to select one of the following:

• USB TO TV: To clone the data from a USB storage device to a TV.

• TV TO USB: To clone the data from a TV to a USB storage device.

En glish

Clone data from an RF channel

1 Press M on the setup remote control to display the setup menu. 2 Press to select SMARTCLONE > SOURCE > RF. 3 Press to set the following:

• CABLE TUNING: Select YES to access channel numbers 1-135. Select NO to access channel numbers 2-69.

• RF CHANNEL NUMBER: Select an RF channel to retrieve the conguration data from.

• RF TO TV: To star t the download of data from an RF channel.

01 32HFL5561D/27 02 SV1A0707100003 03 IC7U1 - 0 .11/M3.22

04 LC72HUL1 - 0.13 05 OPT (30) 22 20 1C 23 06 OPT - MODEL 32HFL5561D/27 07

08 COMMUNICATION SP - SPI ONLINE

01 TV2 NOT TUNED

01 32HFL5561D/27 02 SV1A0707100003 03 IC7U1 - 0 .11/M3.22

04 LC72HUL1 - 0.13 05 OPT (30) 22 20 1C 23 06 OPT - MODEL 32HFL5561D/27 07

08 COMMUNICATION SP - SPI ONLINE

01 TV2 NOT TUNED

8 Installation of Pay-Per-

STORE >

COMMUNICATION

SP-SPI

DCM TYPE

NO SOURCE SWITCH

View box

This section describes how to install an external pay-per-view box.

Step1: Set the communication mode

You must setup the correct communication protocol before you connect the Pay-Per-View box to the TV. This section describes how to select the communication mode.

1 Press M on the setup remote control. 2 Press to select COMMUNICATION.

3 Press to enter the COMMUNICATION menu. 4 Press to select SP-SPI. 5 Press to select STORE. 6 Press to store your setting.

Step2: Connect the pay-per-view box

Note

• Turn off your TV before you connect the pay-per-view box.

1 Insert the RJ12 cable of the Pay-Per-View box into the DATA 1

(RJ12) connector of the T V.

2 Connect the other cables as directed by the Pay-Per-View

provider.

3 After completing the connections of the cables, turn on the TV. 4 Press RECALL on the setup remote control and check that the

status of SP-SPI is ONLINE. If the status is OFFLINE, check that the RJ12 cable and the connections between the terminal and the TV are correct.

9 Troubleshoot basic

problems

This section describes commonly encountered issues and accompanying solutions.

The TV does not communicate with the external interactive terminal:

Press RECALL on the setup remote control. Check that the status of communication is: “COMMUNICATION SP-SPI ONLINE”.

• If the communication protocol in the status is not SP-SPI, set the communication protocol by following the instructions in the previous chapter.

• If the communication status is OFFLINE, check that the RJ12 cable and the other cables are connected properly.

The letter ‘F’ appears on the screen:

• If the letter ‘F’ appears on the screen, it indicates that the TV is in factory mode. To restore the TV to normal settings, press VOLUME (-) and P/CH (-) buttons on the side of the TV, simultaneously for a few seconds.

•

En glish

Appendix A

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. This product may contain lead or mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance:www.eiae.org.

16. Damage Requiring Service - The appliance should be serviced by qualiﬁed service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design.

• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also,do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure below.

21. Objects and Liquid Entry - Care should be taken so that objects do

not fall and liquids are not spilled into the enclosure through openings. a) Warning: To reduce the risk of ﬁre or electric shock, this apparatus should not be exposed to rain or moisture and objects ﬁlled with liquids, such as vases should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - alignment as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.)

• Remove batteries when the unit is not used for a long time.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

ELECTRIC SERVICE EQUIPMENT

Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

NEC SECTION

(

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

NEC ART 250, PART H)

(

810-20)

GROUNDING CONDUCTORS (

NEC SECTION 810-21)

Philips 26HFL5561V-27, 26HFL5561L-27, 42HFL5581L-27, 52HFL5581V-27, 42HFL5581V-27 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual