Philips 32PHA4509, 40PFA4509, 50PFA4509 User Manual
32PHA4509
40PFA4509
50PFA4509
Register your product and get support at
www.philips.com/welcome
EN
User manual
English
1
EN
Contents
1 Caution 2
2 Important 3
Safety 3
3 Your TV 5
Control Panel 5
Remote Control 5
Remote control usage 6
4 Use your TV 7
Switch TV on or off 7
Switch channels 7
Watch connected devices 8
Adjust TV volume 8
5 Other uses of the TV 9
Accessing the TV menu 9
Change the picture and sound setup 9
Adjusting setup 10
Use timer 12
Adjusting VGA Setup 12
Playing media from USB devices 13
Updating the TV software 15
Restoring the factory setup 15
6 Setting up channels 16
Setting up channels automatically 16
Updating channels 16
Setting channels manually 16
Renaming channels 17
7 TV connections 18
Rearconnections 18
Side connections 18
Connecting to a computer 20
Use Philips EasyLink 21
8 Product information 22
Display resolutions 22
Multimedia 22
Sound power 22
Inherent resolution 22
Tuner / Reception / Transmission 22
Remote Control 22
Power Supply 22
Supported TV mounts 23
9 Troubleshooting 24
General issues 24
Channel issues 24
Picture issues 24
Sound issues 25
HDMI connection issues 25
Computer connection issues 25
Contact us 25
2
EN
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
Pixel characteristics
This LCD/LED product has a high number of
color pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Mains fuse (/56)
This TV is fitted with an approved moulded
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
1
Remove fuse cover and fuse.
2
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your dealer
in order to verify the correct type.
3
Refit the fuse cover.
Copyright
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
All other registered and unregistered
trademarks are the property of their respective
owners.
1 Caution
2014© TP Vision Europe B.V. All rights
reserved. Specifcations are subject to change
without notice. Trademarks are the property
of Koninklijke Philips N.V or their respective
owners. TP Vision Europe B.V. reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. TP
Vision Europe B.V. warrants that the material
itself does not infringe any United States
patents. No further warranty is expressed or
implied.
TP Vision Europe B.V. cannot be held
responsible neither for any errors in the
content of this document nor for any problems
as a result of the content in this document.
Errors reported to Philips will be adapted and
published on the Philips support website as
soon as possible.
Terms of warranty
•
Risk of injury, damage to TV or void of
warranty! Do not attempt to repair the TV
yourself.
•
Use the TV and accessories only as
intended by the manufacturer.
•
The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
•
Any operation expressly prohibited in
this manual, or any adjustments and
English
3
EN
•
Avoid force coming onto power plugs.
Loose power plugs can cause arcing or fire.
Risk of injury or damage to the TV!
•
Two people are required to lift and carry a
TV that weighs more than 25 kg or 55 lbs.
•
When stand mounting the TV, use only the
supplied stand. Secure the stand to the TV
tightly. Place the TV on a flat, level surface
that can support the combined weight of
the TV and the stand.
•
When wall mounting the TV, use only a
wall mount that can support the weight
of the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. TP Vision Europe
B.V. bears no responsibility for improper
wall mounting that results in accident,
injury or damage.
•
If you need to store the TV, disassemble
the stand from the TV. Never lay the TV on
its back with the stand installed.
•
Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
•
Parts of this product may be made of
glass. Handle with care to avoid injury and
damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
•
Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
•
Ensure that no part of the TV hangs over
the edge of the surface.
•
Never place the TV on tall furniture (such
as a bookcase) without anchoring both the
furniture and TV to the wall or a suitable
support.
•
Educate children about the dangers of
climbing on furniture to reach the TV.
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
•
Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on or
into the TV, disconnect the TV from the
power outlet immediately. Contact Philips
Consumer Care to have the TV checked
before use.
•
Never place the TV, remote control or
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep candles
or other flames away from the TV, remote
control and batteries at all times.
•
Never insert objects into the ventilation
slots or other openings on the TV.
•
When the TV is swivelled ensure that no
strain is exerted on the power cord. Strain
on the power cord can loosen connections
and cause arcing.
•
To disconnect the TV from the mains
power, the power plug of the TV must be
disconnected. When disconnecting the
power, always pull the power plug, never
the cord. Ensure that you have full access
to the power plug, power cord and outlet
socket at all times.
Risk of short circuit or fire!
•
Never expose the remote control or
batteries to rain, water or excessive heat.
4
EN
•
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
•
To avoid deformations and color fading,
wipe off water drops as soon as possible.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environment and human
health.
Risk of swallowing batteries!
•
The product/remote control may contain a
coin-type battery, which can be swallowed.
Keep the battery out of reach of children
at all times!
Risk of overheating!
•
Never install the TV in a confined space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of injury, fire or power cord damage!
•
Never place the TV or any objects on the
power cord.
•
Disconnect the TV from the power outlet
and antenna before lightning storms.
During lightning storms, never touch any
part of the TV, power cord or antenna
cable.
Risk of hearing damage!
•
Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
•
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting the
TV to the power outlet.
Screen care
•
Avoid stationary images as much as
possible. Stationary images are images that
remain on-screen for extended periods
of time. Example: on-screen menus, black
bars and time displays. If you must use
stationary images, reduce screen contrast
and brightness to avoid screen damage.
•
Unplug the TV before cleaning.
•
Clean the TV and frame with a soft, damp
cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
English
5
EN
Remote Control
a
(Standby)
Switch the TV on or to standby.
b
Play buttons
Control video or music.
c
FORMAT
Change picture format.
d
TV
Switch source to watch TV.
3 Your TV
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
Control Panel
1
2
3
4
5
a
Volume-: When there is no keyboard
menu, lower the volume function;When
the keyboard menu appears, move the
appropriate options to the left / right.
b
Volume+: When there is no keyboard
menu, improve the volume function; when
the keyboard menu appears, move the
appropriate options to the left / right.
c
Channel+: When there is no keyboard
menu, switch to the next channel function;
when the keyboard menu appears, move
up and down the appropriate options.
d
Channel-: When there is no keyboard
menu, switch to the prior channel function;
when the keyboard menu appears, move
up and down the appropriate options.
e
Signal source/OK: In standby status,the
signal source / OK key is used as a power
key, press this key to boot.
After booting, the menu signal source /
OK is used to open the keyboard menu
functions.When the keyboard menu is
open, the signal source / OK is used as a
confirm key.
Note: The control panel on the smart TV
and the web browser has no effect,the
source / OK key under USBhas no effect.
6
EN
Remote control usage
When you use the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight between
the remote control and TV is not blocked by
furniture, walls or other objects.
e
(Home)
Access the home menu.
f
INFO
Display information about current activity.
g
(Navigation buttons)
Navigate through menus and select items.
h
OK
Confirm an entry or selection.
i
OPTIONS
Access options for the current activity or
selection.
j
(Back)
Return to the previous menu or exit a
function.
k
CH +/- (Channel +/-)
Switch channels.
l
(Mute)
Mute or restore audio.
m
+/- (Volume)
Adjust volume.
n
Color buttons
Select tasks or options.
o
0-9 (Numeric buttons)
Select channel.
p
TEXT
Enable or disable teletext.
q
SUBTITLE
Enable or disable subtitles.
r
ADJUST
Access the setup menu.
s
LIST
Access the TV channel list.
t
SOURCE
Select connected devices.
English
7
EN
Switch channels
1
2
3
4
5
•
Press CH +/- on the remote control or
the lower right part of the TV.
•
Enter a channel number using the numeric
buttons on the remote control.
•
Press on the remote control to switch
and return to the previous channel.
View installed channel
You can view all available channels on the
channel list.
1
Press OK or LIST.
» The channel list appears.
2
Press to select a channel and browse
the channel list.
3
Press OK to watch the selected channel.
4
Press to switch to and resume the last
watched channel.
4 Use your TV
This section helps you perform basic TV
operations.
Switch TV on or off
Standby indicator
To switch on
•
Plug in the power plug.
»If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
•
Press (Standby-On) on the remote
control.
»The standby indicator switches to red.
Tip
•
Though your TV consumes very little power when in
standby mode, energy continues to be consumed. When
not in use for an extended period of time, disconnect the
TV power cable from the power outlet.
Loading...