PHILIPS 40HFL5573D, 46HFL5573D, 55HFL5573D User Manual
32HFL5573D/10
40HFL5573D/10
46HFL5573D/10
55HFL5573D/10
Register your product and get support at
www.philips.com/welcome
EN User Manual
MediaSuite xxHFL5573D/10 Page 1
Contents
1. Notice 3
2. Important 5
Welcome Logo / Hotel
Information 44
RF Download 44
Start Download 45
3. Get started 8
TV tour 8
Connect devices 9
4. Use your TV 12
Controls 12
Watch TV 14
Browse Net TV 18
5. Use more of your TV 20
View Teletext 20
Set clocks and timers 21
View subtitles 22
View Hotel Information 22
Use EasyLink 23
6. Set up your TV 25
Introduction 25
Benefits of specific Hotel TVs 25
Professional Setup Remote
control (22AV8573 optional) 25
Professional mode options 26
Setup settings 28
PBS Setup 28
TV Setup 35
Change picture and sound
settings (with PBS setup RC) 35
More Channel Settings 40
Change channel settings 43
Source Selection 43
Store Settings 43
Smart Clone 43
7. Connect your TV 46
About cables 46
Connect devices 48
Connect more devices 55
Computers and the Internet 56
Wireless LAN ready 57
Common interface 59
8. Troubleshooting 60
Contact Philips 60
General TV 60
TV channel 61
Picture 61
Sound 62
HDMI 62
USB 63
Network 63
9. Product specifications 64
Power and reception 64
Display and sound 64
Display resolutions 65
Mulimedia 66
Connectivity 67
Dimensions 67
Use a Kensington lock 69
10. Index 70
MediaSuite xxHFL5573D/10 Page 2
English
1. Notice
2010 © Koninklijke Philips Electronics
N.V. All rights reserved.
Specifications are subject to change
without notice. Trademarks are the
property of Koninklijke Philips Electronics
N.V or their respective owners. Philips
reserves the right to change products at
any time without being obliged to adjust
earlier supplies accordingly. The material
in this manual is believed adequate for the
intended use of the system. If the product,
or its individual modules or procedures,
are used for purposes other than those
specified herein, confirmation of their
validity and suitability must be obtained.
Philips warrants that the material itself
does not infringe any United States
patents. No further warranty is expressed
or implied.
Warranty
• Risk of injury, damage to TV or void of
warranty! Never attempt to repair the
TV yourself.
• Use the TV and accessories only as
intended by the manufacturer.
• The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not
recommended or authorised in this
manual shall void the warranty.
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective
pixels of 99.999% or more, black dots or
bright points of light (red, green or blue)
may appear constantly on the screen. This
is a structural property of the display
(within common industry standards) and is
not a malfunction.
Open source software
This television contains open source
software. Philips hereby offers to deliver or
make available, upon request, for a charge
no more than the cost of physically
performing source distribution, a complete
machine-readable copy of the
corresponding source code on a medium
customarily used for software interchange.
This offer is valid for a period of 3 years
after the date of purchase of this product.
To obtain the source code, write to:
GBU Customer Care Manager
Customer Care department
Philips Lighting
GBU Hospitality
Hurksestraat 2c
5652 AJ Eindhoven
The Netherlands
MediaSuite xxHFL5573D/10 Page 3
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers which, like any
electronic apparatus, in general have the
ability to emit and receive electromagnetic
signals.
One of Philips’ leading Business Principles
is to take all necessary health and safety
measures for our products, to comply with
all applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing the
products.
Philips is committed to develop, produce
and market products that cause no
adverse health effects. Philips confirms
that if its products are handled properly for
their intended use, they are safe to use
according to scientific evidence available
today.
Philips plays an active role in the
development of international EMF and
safety standards, enabling Philips to
anticipate further developments in
standardisation for early integration in its
products.
Mains fuse (UK only)
This TV is fitted with an approved molded
plug. Should it become necessary to
replace the mains fuse, this must be
replaced with a fuse of the same value as
indicated on the plug (example 10A).
1 Remove fuse cover and fuse.
2. The replacement fuse must comply
with BS 1362 and have the ASTA
approval mark. If the fuse is lost,
contact your dealer in order to verify
the correct type.
3. Refit the fuse cover.
In order to maintain conformity to the
EMC directive, the mains plug on this
product must not be detached from
the mains cord cable.
Copyright
VESA, FDMI and the VESA Mounting
Compliant logo are trademarks of the
Video Electronics Standards Association.
® Kensington and Micro Saver are
registered US trademarks of ACCO World
Corporation with issued registrations and
pending applications in other countries
throughout the world.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
All other registered and unregistered
trademarks are the property of their
respective owners
MediaSuite xxHFL5573D/10 Page 4
English
2. Important
Read and understand all instructions
before you use your TV. If damage is
caused by failure to follow instructions, the
warranty does not apply.
• Risk of short circuit or fire!
• Never expose the remote control
or batteries to rain, water or
excessive heat.
• Avoid force coming onto power
plugs. Loose power plugs can
cause arcing or fire.
Safety
• Risk of electric shock or fire!
• Never expose the TV to rain or
water. Never place liquid
containers, such as vases, near
the TV. If liquids are spilt on or into
the TV, disconnect the TV from the
power outlet immediately. Contact
Philips Consumer Care to have the
TV checked before use.
• Never place the TV, remote control
or batteries near naked flames or
other heat sources, including direct
sunlight.
To prevent the spread of fire, keep
candles or other flames away from
the TV, remote control and
batteries at all times.
• Risk of injury or damage to the TV!
• Two people are required to lift and
carry a TV that weighs more than
25 kg.
• When stand mounting the TV, use
only the supplied stand. Secure the
stand to the TV tightly. Place the
TV on a flat, level surface that can
support the combined weight of the
TV and the stand.
• When wall mounting the TV, use
only a wall mount that can support
the weight of the TV. Secure the
wall mount to a wall that can
support the combined weight of the
TV and wall mount. Koninklijke
Philips Electronics N.V. bears no
responsibility for improper wall
mounting that result in accident,
injury or damage.
• Never insert objects into the
ventilation slots or other openings
on the TV.
• When the TV is swiveled ensure
that no strain is exerted on the
power cord. Strain on the power
cord can loosen connections and
cause arcing.
MediaSuite xxHFL5573D/10 Page 5
• Risk of injury to children!Follow
these precautions to prevent the TV
from toppling over and causing injury to
children:
• Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.
• Ensure that no part of the TV
hangs over the edge of the surface.
• Never place the TV on tall furniture
(such as a bookcase) without
anchoring both the furniture and TV
to the wall or a suitable support.
• Educate children about the
dangers of climbing on furniture to
reach the TV.
• Risk of overheating! Never install
the TV in a confined space. Always
leave a space of at least 4 inches or 10
cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
• Risk of damage to the TV! Before
you connect the TV to the power outlet,
ensure that the power voltage matches
the value printed on the back of the TV.
Never connect the TV to the power
outlet if the voltage is different
• Risk of injury, fire or power cord
damage! Never place the TV or any
objects on the power cord.
• To easily disconnect the TV power
cord from the power outlet, ensure
that you have full access to the power
cord at all times.
• When you disconnect the power
cord, always pull the plug, never the
cable.
• Disconnect the TV from the power
outlet and aerial before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
aerial cable.
• Risk of hearing damage! Avoid
using earphones or headphones at
high volumes or for prolonged periods
of time.
• If the TV is transported in
temperatures below 5°C, unpack the
TV and wait until the TV temperature
matches room temperature before
connecting the TV to the power outlet.
Screen care
• Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include: onscreen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft,
damp cloth. Never use substances
such as alcohol, chemicals or
household cleaners on the TV.
• Risk of damage to the TV screen!
Never touch, push, rub or strike the
screen with any object.
• To avoid deformations and colour
fading, wipe off water drops as soon as
possible
MediaSuite xxHFL5573D/10 Page 6
English
Disposal of your old product and
batteries
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused.
Ecolabel
Philips continuously focuses on lowering
the environmental impact of our innovative
products. We aim our efforts towards
environmental improvements during
manufacturing, reduction of harmful
substances, efficient use of energy, endof-life instructions and product packaging.
This TV has been awarded the European
Union Ecolabel for its environmentally
friendly qualities.
When this crossed-out wheeled bin
symbol is attached to a product it means
that the product is covered by the
European Directive 2002/96/EC. Please
inform yourself about the local separate
collection system for electrical and
electronic products.
Please act according to your local rules
and do not dispose of your old products
with your normal household waste.
Correct disposal of your old product helps
to prevent potential negative
consequences for the environment and
human health.
Your product contains batteries covered
by the European Directive 2006/66/EC,
which cannot be disposed with normal
household waste.
Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the
environmental and human health.
A TV that is awarded the Ecolabel
contains energy-efficient features. To
access energysaving settings while you
watch TV, press the Green button on the
remote control.
You can find detailed information on
standby energy consumption, warranty
policy, spare parts and recycling of this TV
on the Philips website for your country at
www.philips.com.
MediaSuite xxHFL5573D/10 Page 7
3. Get started
TV tour
Remote control
To adjust the volume.
To switch TV channels.
To open or close the Find menu
In the Find menu, access the channel list.
To open or close the Text menu
In the Text menu, access teletext for news
and information.
To open or close the Options menu
To open or close the Home menu
Options menus offer convenient settings
In the Home menu, access connected
devices, picture and sound settings, and
other useful features.
To open or close the Source menu
In the Source menu, access connected
devices.
MediaSuite xxHFL5573D/10 Page 8
for TV channel or program.
To return to the previous menu page or to
exit from a TV function.
Press and hold to return to watching TV.
English
To select a red menu option, access
digital Interactive TV services*, or watch
TV demonstration clips.
*Available on certain models only.
Connect devices
To select a green menu option or to access
energy efficient settings.
Read more about the remote control in
Use your TV > Controls > Remote control
(Page 10).
Press ▲ to select the next TV tour.
For the best picture and sound quality,
connect a DVD, Blu-ray disc player, or
game console through HDMI (TM).
To watch a non EasyLink compliant
device, add it to the Home menu.
1. Press > [Add your devices]
2. Follow the onscreen instructions.
Note: If you are prompted to select the TV
connection, select the connector that this
device uses. See Connect your TV >
Connect devices (Page 37) for
information on connection.
If an EasyLink or HDMI-Consumer
Electronic Control (HDMI-CEC) compliant
device is connected to the TV, it is
automatically added to the Home menu
when both devices are switched on.
To watch a connected device
1. Press
2. Select the newly added device icon.
MediaSuite xxHFL5573D/10 Page 9
You can learn more on device connections in Connect your TV > Connect devices
High Definition TV
For high-definition (HD) picture quality,
watch HD programs
On standard-definition (SD) programs, the
picture quality is standard.
You can watch HD video content in these
ways and more:
a Blu-ray disc player, connected
with a HDMI cable, playing a Bluray disc
an upscaling DVD player,
connected with a HDMI cable,
playing a DVD disc
an over-the-air HD broadcaster
(DVB-MPEG4)
a digital HD receiver, connected
with an HDMI cable, playing HD
content from a cable or satellite
operator
a HD channel on your DVB-C
network
a HD game console (for example
X-Box 360 or PlayStation 3),
connected with an HDMI cable,
playing a HD game
HD video clip
To experience the stunning sharpness and
picture quality of HD TV, watch the HD
video clip from the Home menu.
Press >[Setup] > [Watch demos].
Watch Demo is on the second page of the
setup menu
For more information about the availability
of HD channels in your country, contact
your Philips dealer or visit
www.philips.com/support
MediaSuite xxHFL5573D/10 Page 10
English
Network
Connect your TV to your home network to
play music, photos, and videos from a
computer or other media server on the
same network.
Read more in Connect your TV >
Computers and the Internet (Page 44).
Net TV
If your home network is connected to the
Internet, you can connect your TV to Net
TV. Net TV offers movies, pictures, music,
and much more.
Read more in Use your TV > Browse Net
TV (Page 15).
MediaSuite xxHFL5573D/10 Page 11
4. Use your TV
Controls
TV controls
Remote control
1. : Increase or decrease
volume.
2. N.A.
3. (Home): Access the Home menu.
Press again to launch an activity in the
Home menu.
4. CH +/-: Switch to the next or previous
channel.
Indicators
1. (Standby): Switch the TV on or to
standby.
2. Play buttons: Control video or music play.
3. Color buttons: Select tasks or
options.
Not supported in MHEG mode.
4. (Home): Access the Home menu.
5. (Navigation buttons): Navigate
through menus and select items.
6. CH - / CH + (Previous/Next): Switch
channels, navigate through menu
pages, tracks, albums, or folders.
7. OK: Confirm an entry or selection.
8. (Back): Return to the previous menu
page or to exit from a TV function.
9. FIND: Access the menu to select TV
channel list.
1. Ambient sensor / remote control
sensor
Ambient sensor is available on certain
models only.
MediaSuite xxHFL5573D/10 Page 12
10. NetTV: Access the NetTV page.
11. SOURCE: Select connected devices.
12. OPTIONS: Access options for the
current activity or selection.
English
13. +/- (Volume): Adjust volume.
14. (Mute): Mute or restore audio.
15. 0 – 9 (Numeric buttons): Select
channels.
16. TEXT/INFO: Enable or disable
teletext.
Press and hold to view more
information on the current activity.
The INFO button is available on
certain models only.
17. SUBTITLE: Enable or disable
subtitles.
Batteries
Warning: Risk of swallowing batteries!
The product/remote control may contain a
coin type battery, which can be swallowed.
Keep the battery out of reach of children at
all times!
Caution: The battery contains perchlorate
material, handle it with care. For
information, see
www.dtsc.ca.gov/hazardouswaste
/perchlorate
If your remote control signal is weak,
replace the batteries:
1. Open the battery cover.
2. Remove the old batteries from the
battery compartment, and replace
them with fresh batteries.
Make sure that the ends of the batteries
line up correctly with the +/- markings in
the battery compartment.
Notes:
Dispose of batteries according to
environmental directives.
Remove batteries from the remote control
if you will not use it for an extended period
of time.
Remote control with coin cell batteries:
MediaSuite xxHFL5573D/10 Page 13
EasyLink controls
Note: EasyLink controls are available
when the connected device is HDMI-CEC
compliant.
EasyLink allows you to control your TV
and other HDMI-CEC devices with one
remote control.
Access EasyLink controls
1. While you view content from a
connected
HDMI-CEC device, press OPTIONS.
2. Select [Show device keys], then
press OK.
3. Select the EasyLink control button,
then press OK.
Read more on EasyLink in Use more of
your TV > Use EasyLink (Page 18).
Watch TV
Switch TV on or off
Switch the TV on
Press the power switch at the
base of the TV to the ON
position.
If the TV is in standby, press
on the remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from
standby, press CH +/- on the front of the
TV.
Switch TV to standby
Press on the remote control. The
remote control sensor on the TV
switches to red.
Automatic switch off
This TV is designed with energy efficiency
settings. If there is no user interaction
(such as pressing a remote control button
or a control on the front panel) for four
hours, the TV will automatically switch to
standby.
MediaSuite xxHFL5573D/10 Page 14
English
To disable automatic switch off,
While you watch TV, press the green
button on the remote control. Select [Auto
switch off] and press OK. An on screen
message confirms that automatic switch
off is disabled.
Adjust TV volume
Increase or decrease the TV volume
Press +/- on the remote control.
Press on the front of the
TV.
Mute or unmute the TV volume
Press to mute the TV, or
Press again to restore the
volume.
Switch TV channels
Press CH+ / CH- on the remote control.
Press CH +/- on the TV.
Press the Numeric buttons to enter a
channel number.
View program guide
The program guide displays information
about digital TV channels, for example:
Channel schedules
Synopsis of programs
Note: TV program guides are available in
certain countries only.
Use smart picture settings
Select your preferred picture
setting.
1. While you watch TV, press
OPTIONS
2. Select [Smart picture].
3. Select one of the following settings,
then press OK:
[Personal]: Apply your
personalized picture settings.
[Vivid]: Rich and dynamic
settings, ideal for daytime
viewing.
[Natural]: Natural picture
settings.
[Cinema]: Ideal settings for
movies.
[Game]: Ideal settings for games.
[Energy saving]: Settings that
conserve the most energy.
[Standard]: Default settings that
suit most environments and types
of video.
[Photo]: Ideal settings for
photos.
[Custom]: Customize and store
your own picture settings.
MediaSuite xxHFL5573D/10 Page 15
Use smart sound settings
Select your preferred sound setting.
1. While you watch TV, press
OPTIONS
2. Select [Smart sound]
3. Select one of the following settings,
then press OK:
[Personal]: Apply your preferred
setting in the
Sound menu.
[Standard]: Settings that suit
most environments and types of
audio.
[News]: Ideal settings for spoken
audio, such as the news.
[Movie]: Ideal settings for
movies.
[Game]: Ideal settings for games.
[Drama]: Ideal settings for drama
programs.
[Sports]: Ideal settings for
sports.
Watch a connected device
Add new device
Notes:
Before you watch a connected
device, you must add its icon to
the Home menu. See Connect
your TV > Connect device
(Page 37).
If you connect an HDMI-CEC
compliant device to the TV
through HDMI connector and
switch it on, the device is
automatically added to the Home
menu.
1. Connect and switch on the device.
2. Press .
3. Select [Add your devices], then
press OK
4. Follow the onscreen instructions.
Select your device.
Select the connector.
Note: If you are prompted to select the TV
connection, select the connector that this
device uses.
Select a source
From Home menu
After you have added the new device to
the Home menu, select the new device
icon to view its contents.
1. Press .
2. Select the device icon from the Home
menu.
3. Press OK to confirm.
From Source menu
You can also press SOURCE to
display a list of connector names. Select
the connector that connects the device to
the TV.
1. Press SOURCE.
2. Press the Navigation buttons to
select a connector in the list.
3. Press OK to confirm.
MediaSuite xxHFL5573D/10 Page 16
English
Play from USB
If you have photos, videos or music files
on a USB storage device, you can play the
files on TV.
Caution: Philips is not responsible if the
USB storage device is not supported, nor
is it responsible for damage or loss of data
in the device.
Do not overload the USB port. If you
connect a HDD device that consumes
more than 500mA power, make sure that it
is connected to its own external power
supply.
Access the USB content browser as
follows:
While you watch TV, connect the USB
device to the USB connector on the TV.
Press , select [Browse USB], then
press OK.
Watch video
Press the Navigation buttons to select a
video file, then press OK.
Press ◄ or ► to search forward
or backward within a video.
Press and hold to exit the
content browser.
While you play video, press OPTIONS
to access the following video options:
[Stop]: Stop playback.
[Repeat]: Repeat a video.
[Shuffle on] / [Shuffle off]:
Enable or disable random play of
videos.
Listen to music
Press the Navigation buttons to select
a music track, then press OK.
Press ◄◄ / ►► to search forward or
backward within a track.
Press and hold to exit content
browser.
Press OPTIONS to access or exit the
following music options:
[Stop]: Stop audio play.
[Repeat]: Repeat a track or an
album.
[Play once]: Play the track once.
[Shuffle on] / [Shuffle off]:
Enable or disable random play of
tracks.
MediaSuite xxHFL5573D/10 Page 17
View picture
Press the Navigation buttons to select a
picture, then press OK.
To pause or stop play, press OK.
To skip to the previous or next
file, press |◄ or ►|
Press and hold to exit content
browser.
Press OPTIONS to access or exit the
following picture options:
[Show info]: Display the file
information.
[Stop]: Stop slideshow.
[Rotate]: Rotate the file.
[Repeat]: Repeat the slideshow.
[Play once]: Play the file once.
[Shuffle off] / [Shuffle on]:
Enable or disable random display
of pictures in the slideshow.
[Slideshow speed]: Set the
display time for each picture in
the slideshow.
[Slideshow transition]: Set the
transition from one picture to the
next.
[Set as Scenea]: Set the
selected picture as wallpaper on
TV.
Browse Net TV
What you can do
Enjoy Internet Applications (Apps),
specially adapted internet websites for
your TV. You can control the Apps with
the TV remote control. For example, you
can:
Read newspaper headlines
Watch videos
Check weather forecasts
Use the catch-up TV feature to watch TV
programs that you missed. Availability of
catch-up TV Apps differ for each country.
To find out which TV programs are
available, access the Net TV program
guide.
Notes:
Each country has different Net
TV services.
Certain websites may not display
completely. Some functions are
not available, for example file
download, or functions that
require plug-ins.
Net TV services are updated
automatically.
Net TV displays one page at a
time, in full screen.
Koninklijke Philips Electronics
N.V. bears no responsibility
regarding the content and the
quality of the content provided by
the content service providers.
MediaSuite xxHFL5573D/10 Page 18
English
What you need
To enjoy Net TV, complete these tasks:
1. On your home network, connect the
TV to the Internet
2. On your TV, configure Net TV.
Connect the TV to the Internet
On your home network, connect the
following:
1. Connect a router with a high-speed
connection to the Internet.
2. Switch on the router.
3. Install the network. See Connect the TV
> Computers and the Internet
(Page 44).
Access Net TV Applications (Apps)
The first page shown is the Net TV home
page. The icons on this page represent
the different countries and the watch TV
application. Within the different country
flags there are country dependent
applications:
Browse internet websites with the
Internet Apps.
Press the Navigation buttons to
select an App, then press OK to
confirm.
Read the Net TV quick guide for
more information.
Access website
1. Select an Internet App, then press
OK.
2. Use the Numeric buttons on the TV
remote control to enter a web
address.
Onscreen keyboard
Select the area to enter the web address,
then press OK.
A keyboard appears on the screen.
Use this to enter a web address.
MediaSuite xxHFL5573D/10 Page 19
5. Use more of your TV
View Teletext
Select a page
1. Select a channel that has teletext
feature, then press TEXT.
2. Select a page in one of the following
ways:
Enter the page number with the
Numeric buttons
Press ▲▼ or ▐◄►▌ to view the
next or previous page.
Press the Color buttons to select a
color coded item.
3. Press to exit.
Teletext options
1. When you view teletext, press
OPTIONS.
2. Select one of the following options:
[Freeze page] / [Unfreeze page]:
Freeze or unfreeze the current page.
[Dual screen] / [Full screen]: Enable
or disable dual screen teletext. Dual
screen splits the current channel or
source to the left of the screen, with
teletext on the right.
[T.O.P. overview]: Table Of Pages
(T.O.P.) teletext broadcasts allow you
to jump from one subject to another
without using page numbers.
[Enlarge] / [Normal view]: Zoom in the
page. Press the Navigation buttons to
move around the enlarged view.
[Reveal]: Hide or reveal hidden
information on a page, such as
solutions to riddles or puzzles.
[Cycle subpages]: If subpages are
available, each is shown
automatically.
[Language]: Switch to a different
language group to display different
character sets correctly.
3. Press OPTIONS to exit.
Teletext language
Some digital TV broadcasters provide
several teletext languages. You can set
your primary and secondary language.
1. Press .
2. Select [Setup] > [Channel settings]
3. Select [Languages] > [Primary Text]
or [Secondary Text].
4. Select your preferred teletext
languages, then press OK.
Subpages
A teletext page can contain several
subpages. These subpages are shown on
a bar next to the main page number.
If subpages are available on a teletext
page, press ◄or ► to select them.
Search
1. When you view teletext, press OK to
highlight the first word or number.
2. Press the Navigation buttons to skip
to the word or number to search.
3. Press OK to begin the search.
4. Press ▲ until no word or number is
highlighted to exit the search.
MediaSuite xxHFL5573D/10 Page 20
English
Digital teletext
Some digital TV broadcasters offer
dedicated digital text or interactive
services on their digital TV channels, for
example BBC1.
When in digital teletext:
Press the Navigation buttons to
select or highlight items.
Press the Color buttons to
select an option, then press OK
to confirm or activate.
Note:
Digital text services are blocked when
subtitles are broadcast and enabled on the
TV. Read Use more of your TV > View
subtitles (Page 17).
Teletext 2.5
Teletext 2.5 offers more colors and better
graphics than normal teletext. If Teletext
2.5 is broadcast by a channel, it is
switched on by default.
To switch Teletext 2.5 on or off
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Text 2.5] > [On] or [Off], then
press OK.
Set clocks and timers
Clock
You can display a clock on the TV
screen. The clock displays the time that
is broadcast by your TV service
operator.
Display the TV clock
1. While you watch TV, press
OPTIONS.
2. Select [Status], then press OK.
The clock is displayed on the lower
right hand corner of the TV screen.
Change the clock mode
The clock mode is automatically
synchronized to the Coordinated Universal
Time (UTC). If your TV cannot receive
UTC transmissions, change the clock
mode to [Manual]
MediaSuite xxHFL5573D/10 Page 21
View subtitles
Analog channels
1. Switch the TV to an analog TV
channel.
2. Press TEXT.
3. Enter the three-digit page number of
the subtitles page (usually '888').
4. Press to exit Teletext.
Subtitles display if available.
Digital channels
1. Press OPTIONS.
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on]
or [On during mute], then press OK.
Note:
If MHEG application is activated,
subtitles are not displayed.
If you select [On during mute],
subtitles are displayed only when
you press to mute the sound.
Subtitle language
You can change the subtitle language on
some digital channels.
1. Press .
2. Select [Setup] > [Channel settings]
> [Subtitle language]
3. Select [Primary subtitles] or
[Secondary subtitles] for the
preferred language.
4. Press OK to confirm.
Tip:
You can also press OPTIONS >
[Subtitle language]
View Hotel Information
What you can do
You can display a default picture as the
wallpaper on your TV. You can also load
another picture as the wallpaper.
What you need
To use another picture as the wallpaper,
you need a USB storage device that
contains a picture that is less than 1 MB in
size.
Switch on
1. Press .
2. Select [Hotel Information], then
press OK.
The default picture is displayed.
MediaSuite xxHFL5573D/10 Page 22
Loading...