Philips 37PFL7403, 37PFL7403D/10, 47PFL7403D/10, 42PFL7403D/10, 37PFL7403D - annexe 1 User Manual

EN LCD television
________________________________

DE LCD-Fernsehgerät
________________________________

FR Téléviseur LCD
________________________________

NL LCD televisie
________________________________

IT Televisore LCD
________________________________

ES Televisor LCD
________________________________

PT Televisor LCD
________________________________

EL TËÏÂfiÚ·Û˘ LCD
________________________________

Register your product and get support at

www.philips.com/welcome

37PFL7403
42PFL7403
47PFL7403

Ta ble of contents

1 Important 3

1.1 Safety 3

1.2 Care of the screen 3

1.3 Recycling 3

2Your TV 4

2.1 Television overview 4

2.2 Product highlights 5

3 Getting started 5

3.1 Position the TV 5

3.2 Wall mounting - VESA 6

3.3 Remote control batteries 7

3.4 Antenna cable 7

3.5 Power cable 7

4 Use your TV 8

4.1 Switch on or off - Standby 8

4.2 Watch TV 8

4.3 Watch channels from a digital receiver 9

4.4 Watch connected devices 9

4.5 Watch a DVD 9

4.6 Select a Teletext page 9

5 Use more of your TV 10

5.1 Remote Control 10

5.2 TV menus 11

5.3 Picture and sound settings 12

5.4 Teletext 15

5.5 Create favourite channel lists 17

5.6 Electronic Programme Guide 18

5.7 Timers and locks 19

5.8 Subtitles 20

5.9 Watch and play photos and music 20

5.10 Listen to digital radio channels 22

5.11 Software update 22

6 Channel installation 25

6.1 Automatic channel installation 25

6.2 Manual channel installation 27

6.3 Rearrange stored channels 27

6.4 Channel management 28

6.5 Digital reception test 28

6.6 Factory settings 28

7 Connections (DVD, receiver,...) 29

7.1 Connections overview 29

7.2 About connections 30

7.3 Connect your devices with the
Connection assistant 31

7.4 Connect your devices without the
Connection assistant 31

7.5 Connection setup 37

7.6 Preparing for digital services 38

8Technical data 39

9Troubleshooting 40

10 Index 42

UK Digital TV switchover info 44

Register your product and get support at
www.philips.com/welcome.

Ta b le of contents 1

ENGLISH

2008 © Koninklijke Philips Electronics
N.V. All rights reserved. Specifications
are subject to change without notice.
Tr ademarks are the property of
Koninklijke Philips Electronics N.V. or
their respective owners.

Philips reserves the right to change
products at any time without being
obliged to adjust earlier supplies
accordingly.
The material in this manual is believed
adequate for the intended use of the
system. If the product, or its individual
modules or procedures, are used for
purposes other than those specified
herein, confirmation of their validity
and suitability must be obtained. Philips
warrants that the material itself does
not infringe any United States patents.
No further warranty is expressed or
implied.

Warranty

No components are user-serviceable.
Do not open or remove covers and
do not insert objects in the ventilation
slots or insert objects not suitable for
the specific connectors. Repairs may
only be done by Philips Service
Centres and official repairshops. Failure
to do so shall void any warranty, stated
or implied.
Any operation expressly prohibited in
this manual, any adjustments, or
assembly procedures not
recommended or authorised in this
manual shall void the warranty.

Pixel characteristics

This LCD product has a high number
of colour pixels. Although it has
effective pixels of 99,999% or more,
black dots or bright points of light
(red, green or blue) may appear
constantly on the screen.This is a
structural proper ty of the display
(within common industry standards)
and is not a malfunction.

Open source software

This television contains open source
software. Philips hereby offers to
deliver or make available, upon
request, for a charge no more than the
cost of physically performing source
distribution, a complete machine­readable copy of the corresponding
source code on a medium customarily
used for software interchange.
This offer is valid for a period of 3

years after the date of purchase of this
product.
To obtain the source code, write to
Philips Innovative Applications N.V.
Ass. to the Development Manager
Pathoekeweg 11
B-8000 Brugge
Belgium

Compliance with EMF

Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers, which, like any
electronic apparatus, in general have
the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business
Principles is to take all necessary
health and safety measures for our
products, to comply with all applicable
legal requirements and to stay well
within the EMF standards applicable at
the time of producing the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects.
Philips confirms that if its products are
handled properly for their intended
use, they are safe to use according to
scientific evidence available today.
Philips plays an active role in the
development of international EMF and
safety standards, enabling Philips to
anticipate further developments in
standardisation for early integration in
its products.

Mains fuse (UK only)

This TV is fitted with an approved
moulded plug. Should it become
necessary to replace the mains fuse,
this must be replaced with a fuse of
the same value as indicated on the
plug (example 10A).

1. Remove fuse cover and fuse.

2. The replacement fuse must comply
with BS 1362 and have the ASTA
approval mark. If the fuse is lost,
contact your dealer in order to
verify the correct type.

3. Refit the fuse cover.

In order to maintain conformity to the
EMC directive, the mains plug on this
product must not be detached from
the mains cord.

Copyrights

VESA, FDMI and the VESA
Mounting Compliant logo are
trademarks of the Video Electronics
Standards Association.

Manufactured under license
from Dolby Laboratories. ‘Dolby’,‘Pro
Logic’ and the double D symbol

G,

are trademarks of Dolby Laboratories.

Manufactured under
license from BBE Sound, Inc. Licensed
by BBE, Inc under one or more of the
following US patents: 5510752,

5736897. BBE and BBE symbol are
registered trademarks of BBE Sound
Inc.

Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States
and/or other countries

® Kensington and MicroSaver are
registered US trademarks of ACCO
Wor ld Corporation with issued
registrations and pending applications
in other countries throughout the
world.

All other registered and unregistered
trademarks are the proper ty of their
respective owners.

2

ENGLISH

Important 3

1 Important

Read this user manual before you start to use this
product.

Pay attention to this section and closely follow the
instructions. The warranty does not apply to
damage caused by not taking into account the
instructions.

1.1 Safety

•To avoid short circuit, do not expose the product
to rain or water.

•To avoid a risk of fire or electric shock do not
place naked flame sources (e.g. lighted candles)
close to the TV.

• Leave a space of at least 10cm (4 inches) all
around the TV for ventilation.

• Keep away from radiators or other heat sources.

• Do not install the TV in a confined space such as
a book case. Make sure that curtains, cupboards
and so on cannot obstruct the air flow through
the ventilation slots.

•To prevent damage, do not insert any object into
the ventilation slots.

• Make sure the TV cannot fall down. Place the TV
on a solid and flat surface and only use the stand
provided with the TV.

•To prevent damaging the mains cord, do not
place the TV, or anything else, on the cord.
Damage the cord may cause a fire or electric
shock.

• When mounted on a swivel stand or VESA wall
bracket avoid force coming on the mains plugs.
Mains plugs that are partly loosened can cause
arcing or fire.

1.2 Care of the screen

• Unplug the TV before cleaning.

• Clean the surface with a soft damp cloth. Do not
apply any other substance (chemical or
household cleaning agent).This may damage the
screen.

• Do not touch, push or rub or strike the screen
with anything hard as this may scratch, mar or
damage the screen permanently.

•To avoid deformations and colour fading, wipe off
water drops as soon as possible.

• Stationary images
Avoid stationary images as much as possible. If
you cannot, reduce screen contrast and
brightness to prevent damage to the screen.
Stationary images are images that remain on the
screen for a long time. Examples of stationary
images are: on screen menus, teletext pages, black
bars, stock market information,TV channel logos,
time displays, and so on.

1.3 Recycling

•Take the packaging to your local recycling centre.

• Dispose old batteries safely according local
regulations.

• This product is designed and manufactured for
material recycling and re-use.

• Do not dispose this product with other
household waste. Inform yourself or ask your
dealer about local environmentally safe recycling
and local regulations. Uncontrolled waste disposal
harms the environment and human health.
(EEC 2002/96/EC)

2Your TV

This section gives you an overview of the controls
and functions of this TV.

2.1 Television overview

Controls

1 Indicator light
2 Remote control sensor
3Volume up and down
4 Menu
5 Program/Channel up and down
6Power switch

Connectors

1 Back connectors
2 Side connectors
For more info see section 7 Connections.

Remote control

1 Switch On or switch to Standby
2 Programme guide
3Volume up + or down ­4 Program/Channel up + and down ­5 Menu On or Off
6Navigation key
7 Colour keys

For more info see section 5.1 Remote control
overview.

4 Your TV

POWER

PROGRAM

MENU

VOLUME

-

ENGLISH

2.2 Product highlights

Your new TV is equipped with some of the most
modern audio or video innovations.
Your TV offers the following advantages ...

Full High Definition LCD display

A full HD resolution of 1920x1080p, the highest
resolution of HD sources. It offers a brilliant flicker­free progressive scan picture with optimum
brightness and superb colours.

Pixel Plus

Offers perfect picture quality from any source.

100Hz Clear LCD

100Hz Clear LCD gives a superior motion
sharpness, better black level,high contrast with a
flicker-free, quiet image and a larger viewing angle.

DVB-T and DVB-C integrated tuner

Next to normal analogue TV broadcast your TV
receives digital terrestrial and in certain countries
also digital cable TV and radio broadcasts.

Electronic Programme Guide - EPG

The EPG shows the scheduled digital TV
programmes on screen.The guide can remind you
when programmes start, switch the TV on, etc.

HDMI connectors

HDMI connectors for highest quality high definition
connectivity.

USB connection

Multimedia connection for instantly view or play
your photos or music.

MPEG4 broadcast (if available)
A higher quality videostandard offered by HD
transmitted broadcasts.

3 Get started

This section helps you with the positioning and the
first time installation of the TV.

3.1 Position the TV

Carefully read the safety precautions in section 1.1
Safety before you position the TV.

• Large screen TVs are heavy. Carry and handle the
TV with at least two persons.

• The ideal distance from which to watch TV is
three times its diagonal screen size.

•Position the TV where light does not fall directly
on the screen.

•Your TV is equipped with a Kensington Security
Slot at the back of the TV for an anti-theft lock
(not supplied).

Your TV 5

6 Your TV

3.2 Wall mounting - VESA

) Caution

Consider the TV’s weight when you wall mount it.
Improper mounting can result in severe injury or
damage. Koninklijke Philips Electronics N.V. bears

no responsibility for improper mounting or
mounting that results in accident or injury.

Your TV is prepared for VESA compliant wall
mounting.This bracket is not included.
You need one of the VESA codes hereunder to
purchase the bracket that fits your TV.

37” / 94cm VESA MIS-F 200,200,8
42” / 107cm VESA MIS-F 400,400,8
47” / 119cm VESA MIS-F 400,400,8

Ask your dealer for more info on stands and
wallmount brackets.

The VESA fixation points

Locate the four fixation points at the back of the
TV.

Unmount the TV stand

‡ Locate the four screws of the TV stand.

® Unscrew the screws.

ÒLift the TV off the stand.

3.3 Remote control batteries

‡ Open the battery cover on the back of the

remote control.

® Insert the 2 batteries supplied (Type AA-R6-

1,5V). Make sure the + and - ends of the
batteries line up correctly (inside of case is
marked.)

ÒClose the cover.

rNote

Remove the batteries if not using the remote
control for an extended period of time.

3.4 Antenna cable

‡ Locate the antenna connection at the back of

the TV.

® Insert the antenna cable tightly into the

Antenna x socket.

3.5 Power cable

Keep the mains plug at the wall socket accessible at
all time.
The TV is never powered off completely and
consumes energy unless the mains cord is physically
unplugged.
Although this TV has a very low standby power
consumption, unplug the mains cord if you do not
use the TV for a long time to save energy.
‡ Ver ify that your mains voltage corresponds with

the voltage printed on the sticker at the back of
the TV. Do not insert the mains cord if the
voltage is different.

® Insert the mains cord tightly.

Your TV 7

ENGLISH

4 Use your TV

Learn how to operate your TV for daily use.

4.1 Turn on or off - Standby

rNote

The TV may take up to 15 seconds to turn on.

To turn on the TV:

• Press B Power at the right of the TV if the

standby indicator is off.

• Press B on the remote control if the standby
indicator is on.

To switch to standby:

• Press B on the remote control.

To turn off:

• Press B Power at the side of the TV.

4.2 Watch TV

4.2.1 Switch channels

‡ To switch TV channels:

• Press a number (1 to 999) or press P+ or P-

on your remote control.

• Press

Program/Channel - or + on the side

controls of the TV.

® Press R to return to the previously viewed TV

channel or connected device.

4.2.2 Adjust volume

‡ To adjust the volume:

• Press V + or - on the remote control

• Press Volume + or - on the side controls

of your TV.

® To m ute the sound:

• Press ¬on the remote control.

• Press ¬ again to restore the sound.

8 Use your TV

9

ENGLISH

4.3 Watch channels from a

digital receiver

‡ Switch on the digital receiver.

The picture from your receiver automatically
appears on the screen.

® Use the remote control of your digital receiver

to select TV channels.

If the picture does not appear:

‡ Press the Source v key.
® Press o or œ to select where you connected

your digital receiver.

ÒPress

OK.

rNote

When you did not connect your devices yet, go to
section 7 Connections.

4.4 Watch connected devices

‡ Switch on the device.

The picture from your device automatically
appears on the screen.

If the picture does not appear:

® Press the Source v key.
ÒPress o or œ to select where you connected

your device.

† Press

OK.

rNote

When you did not connect your devices yet, go to
section 7 Connections.

4.5 Watch a DVD

‡ Switch on your DVD player.
® Insert a DVD disc in your player.

The DVD picture automatically appears on the
screen.

ÒPress Play πon the DVD player.

If the picture does not appear:

‡ Press the Source v key.
® Press o or œ to select where you connected

your DVD player.

ÒPress

OK.

Wait a few seconds until the picture appears.

† Press Play π.

4.6 Select a Teletext page

Most TV channels broadcast information through
Teletext.
To watch Teletext:
‡ Press Teletext.

The main index page appears.

® To select a page of your choice:

• Enter the page number with the number keys.

• Press P- or P+ or o or œ or the g key to

view the next or the previous page.

•Press a colour key to select one of the colour
coded items at the bottom of the screen.

•Press R to return to the previously viewed
page.

ÒPress Teletext again to switch Teletext off.

r

Note

Only for UK: some digital TV channels offer
dedicated digital text services (for example BBC1).

For more information on teletext, see section 5.4
Teletext.

Use your TV

5.1 Remote control

5.1.1 Remote control overview

1 Standby B

To switch the TV on or back to standby.

2 Source v

•To switch the Source menu on or off.

•To select a connected device or to return to

TV.

3 Teletext

To switch teletext on or off.

4 Colour keys

• Easy selection of teletext pages.

• Easy selection of tasks.

5 Demo

To switch the Demo menu on and to get a
demonstration of the features of the TV.

6 Guide a

To switch on or off the Electronic Programme
Guide.

7 Navigation key

To navigate (o, œ, p, π) or turn left or right
to go through lists or settings.

8

OK

•To display the channel list.

•To activate a setting.

9 Back key g

To select the previous programme or the
previous TXT page.
To remove the channel list.

10 Volume V

To adjust the volume.

11 Mute ¬

To m ute the sound or restore it.

12 Number keys

To select a TV channel.

13 MHEG Cancel (only for UK)

To cancel only Digital text or Interactive
services.

14 Previous channel R

To return to the previously viewed channel

Use more of your TV10

5 Use more of your TV

This section helps you perform advanced TV
operations including how to:

• use the menus

• adjust picture and sound settings

• make use of Teletext

• create favourite channel lists

• make advantage of Electronic Programme Guide

• set locks and timers

• set subtitles and select a subtitle language

• view your photos or play your favourite music
from a USB memory device or from your PC.

Use more of your TV

15 +P- Channel up or down

To switch to the next or previous channel in
the channel list.

16 Menu

To switch the menu on or off

17 On screen information

INFO

To show channel or programme information if
available.

18 Dual screen b

To show teletext on the right and the picture
on the left of the screen.

19 Subtitle

To activate or deactivate the subtitle mode.

20 Widescreen Picture format q

To select a picture format.

See section 10 Index to find the section in the
manual about a specific remote control key.

5.2 TV menus

With the on screen menus you install your TV,
adjust picture and sound settings and access
features.This section gives an overview of the
menus and describes how to navigate.

5.2.1 The menu

‡ Press Menu to show the TV menu.
® Press Menu to quit the TV menu.

The TV menu offers the following items:

• Smart settings
Select this item to set the TV to one of the
predefined settings. Each setting combines picture
and sound.

• Picture
Select this menu item to adjust all picture
settings.

• Sound
Select this menu item to adjust all sound settings.

• Settings assistant
Use the Settings assistant to guide you through
basic picture and sound settings in an easy way.

• Features
Select this item for other feature settings.

• Setup
Select this item

-for installation and to update the TV software;

- to use the connection assistant which will help

you to connect your devices to the TV.

u

d

t

es

p

e

11

ENGLISH

TV men

Smart settings

Pictur

Soun

Settings assistan

Featur

Setu

Use more of your TV

5.2.2 Use of the menu

Learn to use the menus with this example.
‡ Press Menu.
The TV menu appears on the screen.

® Press o or œ to select Picture.
ÒPress π to enter the picture settings.

† Press œ to select Brightness.

º Press π to enter the brightness setting.

◊Press o or œ to adjust the setting.
‹Press p to return to the Picture settings or

press Menu to quit the TV menu.

rNote:
More choices come available when digital channels
are installed and broadcasted.

5.3 Picture and Sound settings

The first time you switched on the TV you have
selected your preferred settings for picture and
sound.The following sections describe how to
modify or read just those settings.

5.3.1 Smart settings

Sets the TV to one of the predefined settings. Each
setting combines picture and sound.

‡ Press Menu and select Smart settings.
® Press π to enter the list.
ÒPress o or œ to select a setting.
† Press OK.
º Press Menu to quit the TV menu.

Smart settings: Personal,Vivid, Standard, Movie,
Energy saving, Game.

5.3.2 Settings assistant

Use the Settings assistant to guide you through
basic picture and sound settings in an easy way.
Follow the instructions on screen.

‡ Press Menu.
® Select Settings assistant and press π to enter.
ÒPress the green key to start the assistant.
† Press p or π to select the left or right side to

make your choice.

º Press the green key to go to the next setting.

Go through several settings.

◊When finished, press the green key to store all

your settings.

5.3.3 Picture settings

This section describes how to adjust all picture
settings individually.

‡ Press Menu.
® Select Picture and press π to enter the list.
ÒPress o or œ to select a setting.

• Contrast

Changes the level of bright parts in the picture
but keeps the dark parts unchanged.

• Brightness

Changes the level of light of the total picture.

• Colour

Changes the level of saturation.

• Hue

If NTSC is broadcasted, this level compensates
the colour variations.

e

C

t

C

r

ue

t

98

52

0

eduction

e

C

t

C

r

ue

t

90

52

0

eduction

C

t

u

d

t

es

p

e

12

TV men

Smart settings

Pictur

Soun

Settings assistan

Featur

Setu

Pictur

ontras

Brightness

olou

H

Sharpness

Noise r

Tin

ontras

Pictur

ontras

Brightness

olou

H

Sharpness

Noise r

Tin

Brightness

Brightness

Use more of your TV

• Sharpness

Changes the level of sharpness of fine details.

• Noise reduction

Filters out and reduces the noise in the picture.
Set the level to Minimum, Medium, Maximum or
Off.

• Tint

Sets the colours to Normal,Warm (reddish) or
Cool (bluish). Select Custom to make a setting of
your own in the Custom menu.

•Custom

Press the green key to select each bar to
change the value of:

- R-WP red whitepoint

- G-WP green whitepoint

- B-WP blue whitepoint

- R-BL red blacklevel

- G-BL green blacklevel

• Pixel Plus

Controls the advanced settings of the Pixel Plus
Engine, resulting in best sharpness, contrast,
colour and motion.

- HD Natural Motion

Removes motion judder and reproduces
smooth movement especially in movies.

- 100 Hz Clear LCD

Gives a superior motion sharpness, better black
level, high contrast with a flicker-free, quiet
image and a larger viewing angle.

- Advanced sharpness

Enables superior sharpness, especially on lines
and contours in the picture.

- Dynamic contrast

Sets the level at which the TV automatically
enhances the details in dark, middle and light
areas of the picture.

- Dynamic backlight

Sets the level at which power consumption can
be reduced by dimming the brightness intensity
of the screen.
Choose for the best power consumption or for
the picture with the best brightness intensity.

- MPEG artefact reduction

Smooths the digital transitions in the picture.

- Colour enhancement

Makes the colours more vivid and improves the
resolution of details in bright colours

• Active control
Corrects all incoming signals in order to provide
the best picture possible.
Switches Active control on or off.

• Light sensor
Adjusts the picture settings on the lighting
conditions of the room.
Switches Light sensor on or off.

• Picture format / Auto format mode
See section 5.3.4 Widescreen picture format.

5.3.4 Widescreen picture format

Avoid black bars on the sides or on top and
bottom of the picture. Change the picture format
to a format that fills the screen.
‡ Press q to switch on the Picture format

menu.

® Press o or œ to select an available picture

format.

ÒPress OK.
† Press o to shift the picture upwards if subtitles

are hidden.

à Tip

For minimal distortion, select the Auto format
setting.

ePerfec

D

on

CD

.

t

eduction

t

at

ode

ol

G

artefac

.

C

.

r

D

e

C

t

C

r

ue

t

eduction

ode

at

r

TV men

u

d

es

p

e

13

ENGLISH

Smart settings

Pictur

Soun

Featur

Setu

Pictur

ontras

Brightness

olou

H

Sharpness

Noise r

Tin

Light senso

Picture form

Auto format m

Pictur

Noise r

Tin

Perfect Pixel H

Active contr

Light senso

Picture form

Auto format m

t Pixel H

HD Natural Moti

100 Hz Clear L
Advanced sharpn..

Dynamic contras

MPE

olour enhance..

t red..

Use more of your TV

• Auto format (Not for PC.)

Enlarges the picture automatically to fill the
screen. Subtitles remain visible. You can set Auto
format in two different modes.

‡ In the TV menu, select Picture > Auto format

mode.

® Select Auto-fill to fill the

screen as much as
possible. Select Auto-
zoom to keep the original
picture format but black
bars may be visible.

• Super zoom (Not for HD.)

Removes the black bars on
the side of 4:3 broadcasts.
There is a minimal
distortion.

• 4:3 (Not for HD.)

Shows the classical 4:3
format.

•Movie expand 14:9

(Not for HD.)
Scales the format to 14:9.

•Movie expand 16:9

(Not for HD.)
Scales the format to 16:9.

• Wide screen

Stretches the format to
16:9.

• Unscaled

(Only for HD and PC.)
Maximum sharpness.
Distortion may appear on
borders. Black bars may
appear with pictures from
your PC.

rNote

Do not forget to name the connection in the
Connection menu. See section 7.5.1 Naming your
devices.

5.3.5 Sound settings

This section describes how to adjust all sound
settings.

‡ Press Menu and select Sound.
® Press π to enter the list.
ÒPress o or œ to select a setting.

• Equalizer

Changes the bass and treble of the sound. Select
each bar to change the setting.

•Volume

Changes the volume. When adjusting the volume
with V a volume bar appears. If you do not
want it to appear go to Menu > Setup >
Installation > Preferences and press π to enter
the list and select Volume bar off.

• Volume – Visually impaired (UK only)
Changes the volume of the selected Visually
impaired audio language in the Setup, Installation
menu. See section 6.1 Automatic installation.

• Balance

Sets the balance of the left and right
loudspeakers to fit best your listening position.

• Audio language

A list of audio languages for the current
programme may be available when digital
channels are installed and broadcasted.
To permanently change the audio language, see
section 6 Channel installation.

• Dual I/II
If broadcasted, you can choose between two
different languages.

• Mono/stereo
If stereo broadcasting is available, you can select
Mono or Stereo per TV channel.

u

d

r

e

.

ce

ge

t

es

p

I

o

e

.

e

d

d

e

14

TV men

Smart settings

Pictur

Soun

Settings assistan

Featur

Setu

Soun

Equalize

Volum

Volume - Visually..

Balan

Audio langua

Dual I/I

Mono/Stere

Headphone volum

Auto volume level..

Delta volum

Auto surroun

• TV speakers

If you have connected an audio system to your
TV, you can switch off the TV speakers.
This option is only available if EasyLink is set to
On. See Menu > Setup > Installation >
Preferences > EasyLink.
Select Automatic (EasyLink) to have the sound
from your TV automatically reproduced by your
audio system.

• Surround mode

To select a more spatial sound if broadcasted or
if available from a connected device.

• Headphone volume

Changes the volume of the headphone.
You can mute the TV speakers with ¬ on the
remote control.

• Auto volume levelling

Reduces sudden volume differences like at the
beginning of commercials or when switching from
one channel to another.
Select on or off.

• Delta volume

Levels out volume differences between channels
or connected devices.

‡ Switch to the channel or device you want to

level out the volume difference.

® Select Delta volume in the Sound menu and

change the volume level.

• Auto surround

Switches the TV automatically to the best
surround sound mode dependant on the
broadcast.
Select on or off.

5.4 Teletext

Your TV has a 1200 pages memory that stores
broadcasted teletext pages and subpages to reduce
waiting time.

To select a teletext page see section 4.6 Select a
Teletext page.

5.4.1 Select a teletext language

Some digital TV broadcasters offer the possibility to
select your preferred teletext language. See section

6.1 Automatic installation.

5.4.2 Select pagenumber subpages

A teletext page number can hold several subpages.
The pages are shown on a bar next to the main
pagenumber.

‡ Press Teletext

.

® Select a teletext page.
ÒPress p or π to select a subpage.

5.4.3 Select T.O.P. teletext broadcasts

T. O.P. teletext (Table of Pages) is not broadcast by
all TV channels. You can easily jump from one
subject to another without using pagenumbers.

‡ Press Teletext.
® Press Info.

The T.O.P. overview appears.

ÒUse p or π, o or œ to select a subject.
† Press

OK to view the page.

Use more of your TV 15

ENGLISH

Use more of your TV

5.4.4 Dual screen teletext (not available for

channels with Digital Text services)
View the TV channel and teletext next to each
other.

‡ Press b for Dual screen teletext.
® Press Teletext again to show normal teletext.
ÒPress Teletext to switch off teletext.

5.4.5 Search teletext pages

Quickly jump to a subject linked to a series of
pagenumbers or search for specific words in
teletext pages.

‡ Press Teletext.
® Press

OK to highlight the first word or number.

ÒPress p or π, o or œ to jump to the next

word or number on the page.

† Press

OK to search a page which holds the

highlighted word or number.

º Press o until no word or number is highlighted

to quit Search.

5.4.6 Enlarge teletext pages

For a more comfortable reading, you can enlarge
the teletext page.

‡ Press Teletext and select a teletext page.
® Press q to enlarge the top part of the page.
ÒPress q again to view the enlarged lower

part of the page.

† Press o or œ to scroll through the enlarged

page.

º Press q again to return to the normal page

size.

5.4.7 Teletext menu

With the options in the teletext menu you can
reveal hidden info, let cycle subpages automatically
and change the character setting.

•Reveal

Hide or unhide hidden information on a page,
such as solutions to riddles or puzzles.

• Cycle subpages

If subpages are available for the selected page,
you can make subpages cycle automatically.

• Language

Some languages use a different set of characters.
Switch to the other group to show the text
correctly.

‡ Press Teletext.
® Press Menu.
ÒPress o or œ to select an option.
† Press

OK to change a setting.

º Press Menu to quit the teletext menu.
◊Press Teletext to switch off teletext.

5.4.8 Digital text services (UK only)

Some digital TV broadcasters offer dedicated digital
text or interactive services (for example BBC1) on
their digital TV channels. These services work as
normal Teletext with the number, colour and
navigation keys to select and navigate.

‡ Press Teletext.
® Press p or π, o or œ to select or highlight

items.

ÒPress one of the colour keys to select an

option.

† Press

OK to confirm or activate.

º Press MHEG Cancel to cancel Digital text or

interactive services.

ç Caution

Digital text services are blocked when subtitles are
broadcasted and Subtitle On is set in the Features
menu. See section 5.8 Subtitles.

5.4.9 Teletext 2.5

If broadcasted by the TV channel this teletext offers
more colours and better graphics.
Teletext 2.5 is switched on as a factory setting.
‡ Press Menu on the remote control and select

Setup > Installation > Preferences > Teletext

2.5 and press π to enter the list.

® Select on or off.

Teletext menu

Reveal

Language

Gr. II

Off

Cycle subpages

Off

16

5.5 Create favourite channel

lists

View the All channels list or set up a Favourite list
of your own with your preferred TV channels and
radio stations.

5.5.1 Select a favourite list

You can select one of the favourite channel lists.
‡ Press

OK.

The first time after you have finished the
installation, the All channels list is shown. In
other situations, it brings up the last selected
favourite list.

® Press the red key to show all favourite lists.
ÒPress o or œ to select a list.
† Press

OK.

The selected favourite list appears.

º Press

OK again to quit.

5.5.2 To set up a favourite list

Create or modify your own favourite list.
‡ Press

OK.

The last selected list appears.

® Press the red key to show all favourite lists.
ÒPress o or œ to select a list.
† Press

OK.

º Press the green key to enter the Edit mode.

The selected list brings up a full channel list.

◊Press o or œ to highlight a channel.
‹Press

OK to mark (or unmark) the highlighted

channel.The channel is added to (or removed
from) the selected list.

≈Press the green key again to leave the Edit

mode.
The modified channel list appears again.

5.5.3 Select a channel from a favourite list

‡ Press

OK.

The last selected channel list appears.

® Use o or to highlight a channel.
ÒPress

OK.

The TV tunes to that channel.

à Tip

• Use

-P+ to go through the TV channels of the

selected favourite list.

• With the number keys you can still select
channels which are not marked as favourite.

s

3

2

1

1

1

t

Use more of your TV 17

ENGLISH

-

All channel

EXT

1 Analogue channel

2 Digital channel

3 Digital channel

4 Radio channel

Select lis

Use more of your TV

5.6 Electronic Programme
Guide - EPG -

The Electronic Programme guide is an on screen
guide to scheduled digital TV programmes.
You can navigate, select and view programmes by
time, title or genre.There are two types of EPG,
‘Now and Next’ and ‘7 or 8 day’ EPG.

When digital channels are installed and
broadcasted, EPG is available. ‘Now and Next’ is
always available but the ‘7 or 8 day’ EPG is only
available in some countries.

With the EPG menu you can...

• see a list of current broadcasted programmes

• see the next programme

• group programmes by genre

• set reminders when programmes will start

• set up preferred EPG channels

• etc.

5.6.1 Switch on EPG

‡ Press a.

The following type of EPG appears:

‘Now and Next’ EPG

Detailed information about the current programme
is shown.

Or

‘7 or 8 day’ EPG

It may take some time to receive the EPG data.
The list of TV programmes will show.

® Use the colour keys to activate the available

actions at the bottom of the screen.

• Next: to show information about the next

programme.

• Remind: to mark or unmark a programme as a

reminder.

• Watch: to watch or listen to a current

programme.

• Jump to...: to jump to the next or previous day.

• Info: to display information on a selected

programme (if available).

ÒPress a to quit the EPG.

5.6.2 More on ‘7 or 8 day’ EPG

Search by genre, scheduled reminders, etc. are
managed in the Programme guide menu.

‡ Press a on the remote control.
® Press Menu.

The Programme guide menu appears.

ÒPress o or œ to select a menu option.
† Press π to enter.
º Press o or œ to make a selection.
◊Press

OK to activate or press the green key to

watch

‹Press a to quit the EPG.

rNote

Only channels marked as Preferred EPG channels
appear in the Programme guide menu.

on

y

d

h

e

.

a

on

e

.

Programme guide Tue., 12 Sep

09:55

BBC ONE

BBC TWO

five

BBC THREE

OUR

09:50 Tweenies

09:00 The Wright Stuff

05:32 This is BBC THREE

OUR

g

12:30 Commonwealth

10:15 Something Special

10:30 Trisha Goddard

12:00 This is BBC THREE

OUR

addio

Around Next

07:50 Commonwealth

dWatch

o

.

26 BBC1 Tue., 12 Sep 09:17

Title : Commonwealth Games

Info: 7:50 - 12:30 : 280 min

..........

t

.

t

18

BBC F

:32 This is BBC F

:20 Moonlightin

Remin

13:50 Anastasia 0010 - EEN

12:00 This is BBC F

10:15 D

Jump to ..

Inf

Exi

Press -P+ to change channel

Nex

Programme guideWhat's

What's

Search by genr

Scheduled remind..

Preferred EPG ch..

Acquire EPG dat

12:30 South Toda

11:50 Working Lunc

11:55 Melrose Plac

13:00 In aller Freun

5.7 Timers and locks

This section describes how to switch the TV on or
off at a specified time and to lock or unlock the TV.

5.7.1 Automatically switch to standby

Sleeptimer switches the TV to standby after a time.

‡ Press Menu .
® Select Features > Sleeptimer and press π to

enter the sleeptimer bar.

ÒPress o or œ to set the time up to 180

minutes in steps of 5 minutes. If set to 0
minutes, the Sleeptimer is switched off.

You can always switch off your TV earlier or reset
the time during countdown.

5.7.2 Automatically switch the TV on

On timer switches the TV on automatically to a
specified channel at a specified time, from standby.

‡ Press Menu.
® Select Features > On timer and press π to

enter the On timer menu.

ÒUse p or π, o or œ to select and enter the

menu items one by one to set a channel, a day
of the week or daily, and a starting time.

† Press

OK to confirm.

º Press Menu to quit the menu.

à Tip

To switch off the On timer, select Off in the On
timer menu.

5.7.3 Lock TV channels and programmes

Lock TV channels and/or programmes from
connected devices to prevent children from
watching them. Lock and unlock with a four number
code.

Set or change your code

‡ Press Menu.
® Select Features > Set or Change code and

press π to enter your code.

ÒEnter your code with the number keys.

The Features menu reappears with a message
confirming that your code has been created or
changed.

Did you forget your code ?

‡ Select Change code.
® Press π.

ÒEnter the overriding code 8-8-8-8.
† Enter a new personal code.
º Confirm your new entered code.

The previous code is erased and the new code
is stored.

5.7.4 Activate or deactivate Child lock

Set your code and you can:

• Lock all channels and devices,

• Lock specific channels and devices,

• Set a time after which all channels and devices
are locked,

• Set the maximum allowed parental rating for
digital channels that are installed and broadcast.

‡ Press Menu.
® Select Features > Child lock and press π.
ÒEnter your code with the number keys.
† Select one of the options.
º Press π.

Lock or unlock all channels and connected devices
‡ Select Lock or Unlock.

Lock a certain programme or all channels from a
certain time

‡ Select Custom lock.
® Press π to enter the Custom lock menu.
ÒPress π again to enter the Lock after menu.
† Select On to switch on the Timer lock.
º Press p.
◊Select Time.
‹Press π.
≈Enter the time with o or œ and π.
ÚPress

OK.

Lock one or more channels and connected devices

‡ Select Custom lock.
® Press π to enter.
ÒPress o or œ to select Channel lock.
† Press π.
º Press o or œ to select the channel(s) you

want to lock or unlock.

◊Each time press

OK to lock or unlock the

channel.

k

k

er

k

g

ock

k

k

Use more of your TV 19

ENGLISH

hild loc

L

ustom loc

nloc

ustom loc

Lock aft

hannel loc

Parental ratin

Set an age rating to a digital programme

Some digital broadcasters have their programmes
rated (depending on your country). When the
rating is higher than your child’s age, the
programme will be locked.

‡ Select Custom lock.
® Press π to enter.
ÒPress o or œ to select Parental rating.
† Press π.
º Press o or œ to select an age rating.
◊Press Menu to quit the Child lock menu.

5.8 Subtitles

For each TV channel, subtitles can be set, coming
from Teletext or digital broadcasts.
If digital channels are installed and broadcasted, you
can select your preferred subtitle language.

5.8.1 Subtitling from analogue TV channels

‡ Select an analogue TV channel.
® Press Teletext to switch on Teletext.
ÒEnter the three number pagenumber of the

subtitle page.

† Press Teletext to switch off Teletext.

rNote

The Teletext subtitle page of analogue channels
must be stored for each TV channel separately.

5.8.2 Activate or deactivate subtitling

‡ Press Menu.
® Select Features > Subtitle and press π to enter

the list.

ÒPress o or œ to select On to show the

subtitles always or On during mute to show the
subtitles only when the sound is muted with the
¬ key on the remote control.

† Press p to return to the Features menu.

5.8.3 Select a digital subtitle language

If subtitle broadcasting is available with digital
channels, you can select a preferred subtitle
language out of a list of broadcasted languages.The
preferred subtitle languages set in the Installation
menu are overruled temporarily.

‡ Press Menu.
® Select Features > Subtitle language and press

π to enter the list of available languages.

ÒPress o or œ to select a subtitle language.
† Press

OK.

5.9 Watch and play your

photos and music

Watch pictures or listen to music stored on a USB
device (not supplied with the TV) or a camcorder
(only for photos).Watch your pictures as a
slideshow or listen to a self made music playlist.

rNote

Philips is not responsible if your USB device is not
supported nor shall Philips accept any liability for
damage or loss of stored data. See section 8
Technical data for the playback formats supported.

5.9.1 Insert the USB device

‡ Insert a device at the side of the TV while the

TV is switched on.
A message appears that a USB device has been
detected.

rNote

In case the USB device does not automatically
break in, press Source v > USB/Memory devices
and press OK.
Select Side and press OK to display your
camcorder content.

5.9.2 Remove the USB device

‡ Press Source v.
® Remove the USB device.
ÒSelect TV or another connected device to

watch a programme.

u

es

e

ge

r

k

e

r

o

es

e

d

p

20 Use more of your TV

TV men

Smart settings

Pictur

Soun

Featur

Setu

Featur

ommon interfac

Subtitle

Subtitle langua

Sleeptime

hild loc

Set/Change cod

n time

Dem

5.9.3 Watch your pictures, start a
slideshow and play music

Look up your pictures in the Picture album of your
USB device.
‡ Select the Picture folder for the picture files you

have stored on your USB device.

® Press π to enter the Picture folder.
ÒPress o or œ to select a picture or a picture

album.

† Press

OK to watch the picture or to start a

slideshow of the pictures in the album.

º Press

OK to pause the slideshow. Press again to

restart.

◊Press one of the colour keys on the remote

control to perform the corresponding function
shown at the bottom of the screen.
If the function bar at the bottom disappeared,
press any colour key to let it reappear.

‹Press p and select another picture or another

album.

Slideshow settings

• Details / More details

Shows the picture name, date, size and next
picture in the slideshow.

• Transitions

Shows the list of available transition styles of the
pictures.
Press o or œ to select and press

OK to

activate.

• Slide time

Sets the time lag for the picture transitions:
Short, Medium or Long.

• Rotate

To rotate a picture.

• Start/Show/Pause

To stop, pause and restart the slideshow.

Thumbnails

Watch the pictures of a selected album in an
overview.

‡ Select a picture album.
® Press π to enter the picture list.
ÒPress the blue key.
† Press o or œ, p or π to highlight a picture.
º Press

OK to watch the picture.

◊Press p to return to the thumbnail overview.
‹Press the blue key again to go back to the

picture list.

Listen to music

Look up your songs in the Music album of your
USB device.
‡ Select the Music folder for the music files you

have stored on your USB device.

® Press π to enter the Music folder.
ÒPress o or œ to select a song or a music

album.

† Press

OK to play the selected song or to play a

song followed by the next song in the same
album.

º Press one of the colour keys on the remote

control to perform the corresponding function
shown at the bottom of the screen.
If the function bar at the bottom disappeared,
press any colour key to let it reappear.

Music settings

• Details

Shows the file name.

• Repeat one/all

Repeat all songs in the album until you stop a
song or only repeat the one song selected until
you stop the song.

• Shuffle

Play songs in a random sequence.

jpg

jpg

jpg

jpg

e

1

jpg

jpg

jpg

jpg

5

jpg

1

1

1

jpg

jpg

jpg

jpg

jpg

jpg

B

e

1

6

jpg

jpg

jpg

c

e

Use more of your TV 21

ENGLISH

US

Pictur

Musi

Pictur

Afrika_200

Paris_200

My_car.

Jean.

Mary.

Pictur

Afrika_200

Paris_200

My_car.

Jean.

Mary.

Afrika_200

Kenya.

Congo.

Victoria.

Cairo.

USBAfrika_2001Kenya.

Kenya.

Afrika_200

Kenya.

Congo.

Victoria.

Dakar.

Cairo.

Afrika_200

Kenya.

Watch a slideshow with background music

Watch a slideshow of your stored pictures
accompanied with your stored background music.
‡ Select an album of songs first and press

OK.

® Highlight the Picture folder and select an album

of pictures and press

OK.

5.10 Listen to digital radio

channels

If digital broadcasting is available, digital radio
channels are installed during installation.
To listen to a digital radio channel:
‡ Press

OK on the remote control.

The All channels menu is displayed.

® Use the number keys to select a radio channel

available from channel number 400 onwards.
To reorder see section 6.3.3 Reorder the
channels.

ÒPress

OK.

5.11 Software update

Philips continually tries to improve its products.To
benefit, update the TV software regularly.To update
your TV software you need a USB Memory device
(not supplied).

Verify that your USB memory device has at least
128Mb free space. Make sure the write protection
is switched off. Some USB devices do not work
with our TV.
See section 8 Technical data for the USB formats
supported.

5.11.1 Update assistant

The Update assistant helps you to update the TV’s
software.

Step 1:TV identification

The TV has to identify with your USB memory
device.

‡ Press Menu > Setup.
® Press π.
ÒPress o or œ to select Software update.
† Press π.

º Press o or œ to select Update assistant.
◊Press π.
‹Press

OK to activate.

≈Insert a USB memory device into the USB

connector at the side of the TV.

Ú Press the green key to proceed.

A message appears that the TV has successfully
written its identification file to the USB memory
device.

œ Press the green key again to finish.
πRemove the USB memory device from the TV.

p

e

t

.

t

allation

e

22 Use more of your TV

Setu

nst

Software updat

Software updat

Update assistan

urrent software ..

Local updates

Announcemen

Step 2: Software download from the PC to

the USB device

‡ Insert the USB memory device into a PC linked

to the internet.

® Locate and open the file update.htm on your

USB device.

ÒRead the instructions on screen and click on

the Send

ID button.

If new software is available, the update is
downloaded on the USB memory device.

† Remove the USB memory device from your

PC.

Step 3: Software update transfer to the TV

The downloaded software on the USB memory
device must now be uploaded to your TV.

ç Caution

• Never remove the USB memory device from the

TV during the software update.

• If a power drop occurs during the update, do not

remove the USB memory device from the TV.
When the power retuirns, the TV continues to
update.

‡ Switch on the TV.
® Insert the USB memory device to the USB

connector at the side of the TV.

ÒThe TV switches off.The screen stays black for

about 10 seconds. Wait and do not use the
power switch B on the TV.

† The update process starts automatically. Please

wait.

The update is finished when the message
‘Operation successful’ appears on the screen.

º Remove the USB memory device from the TV.

◊Press B on the remote control.

Do not press more than once and do not use
the Power B switch on the TV.

‹The TV switches off.The screen stays black for

about 10 seconds. Please, wait.

Use more of your TV 23

ENGLISH

BSU

BSU

g

BSU

≈The TV switches back on again.The update is

done.

5.11.2 Software update by digital broadcast

Your TV might receive new software from the
digital broadcast system automatically.
If you receive an update message on screen it is
strongly advised to update the software
immediately - select Now.
If you want to be reminded later on, select Later.
Select Cancel to quit the update (not
recommended). If you cancelled the update you can
still update yourself from the TV menu > Setup >
Software update > Local updates.

24 Use more of your TV

6 Channel installation

The first time you turned on your TV

•you have selected the language of the TV menus

and the country where you are located

• all the available TV Channels have been installed.

This chapter provides instructions on how to
reinstall channels as well as other useful channel
installation features.

rNote:
Re-installation updates the All channels list and new
added channels will not be added to any favourite
list.

6.1 Automatic installation

This section describes how to search for and store
all available channels automatically.

Step 1: Menu language

Sets the language of the TV menus. Go to a next
step if your language settings are correct.

‡ Press Menu.
® Select Setup > Installation > Languages and

press π to enter Menu language.

ÒPress o or œ to select your language.
† Press

OK to confirm.

º Press p to return to the Installation menu.

The Languages menu also offers the following
language settings when digital channels are installed
and broadcasted.

• Preferred audio language

Select one of the available audio languages as
primary preferred and secondary preferred
language.

• Preferred subtitle languages

Select one of the available subtitle languages as
primary preferred and secondary preferred
language. See section 5.8 Subtitles.

• Preferred teletext languages

Select one of the available teletext languages as
primary referred and secondary preferred
language.

• Hearing impaired
Select On to display the hearing impaired subtitle
version of your preferred audio or subtitle
language when available.

• Visually impaired (UK only)
Select to hear the additional commentary audio
(if available) in your selected audio language
through the loudspeakers of your TV or through
the headphones or through both.

rNote:
If both Visually impaired and Hearing impaired are
enabled, the Visually impaired language will have
priority for audio, the Hearing impaired for subtitles.

• Preferred audio format
Select your preferred and available audio format
to achieve the best sound reproduction.
Select Advanced for the best sound reproduction
if a Home theatre system is connected to your
TV. Select Standard in all other cases.

Step 2: Select your country

Select the country where you are located.
The TV will install and arrange the TV channels
according to the country selected.
Go to a next step if your country selection is
correct.

‡ Press œ to select Channel installation.
® Press π to enter the Channel installation menu.

Automatic installation is highlighted.

ÒPress π to enter.
† Press OK.

The Country list appears.

º Press o or œ to select your country.
◊Press Next.

.

w

.

e

ge

e

.

.

ge

on

ge

o

.

t

t

Visually impaired

audio format

ces

.

ces

ecoder

p

Channel installation 25

ENGLISH

Installati

Languages

hannel install..

Preferen

Rename devi

Audio setu

D

Languages

Menu langua

Primary audi

Primary subtitles

Secondary subtitl.

Primary teletex

Secondary teletex

Pref.

hannel install...Automatic install..

Automatic install..

Installation updat

Start-up messa
Antenna/Cabl

Digital: Test recept..

Analogue: Manual..

Rearran

Start no

Step 3: Select Antenna or Cable

This selection is only available when this TV is
prepared to receive DVB-C channels in your
country.
Select Antenna to install all digital terrestrial (DVB­T) and analogue channels available.
Select Cable to install all digital cable (DVB-C) and
analogue channels available.

‡ Press o or œ to select Antenna or Cable.
® Press Next.
ÒIf the TV asks for it, enter the Network ID you

received from your provider.

rNote

You can do a Channel installation if you are both
connected to a digital antenna and a cable network.
Therefore do the installation twice.To watch the
stored Antenna channels or the stored Cable
channels, you will have to switch between Antenna
or Cable in the Channel installation > Antenna or
Cable menu.

Step 4: Install TV and radio channels

Your TV will search for and store all available digital
and analogue TV channels and all available digital
radio channels.

If you selected Cable in Step 3, a Settings menu is
available. Leave these settings unchanged unless
your provider supplied specific values to use for
Network frequency, Network ID or Symbol rate.
Follow the text on screen to change the settings.
Use the digit keys to enter the numbers.You can
also select to install analogue channels or not.

‡ Select Start.

The installation may take a few minutes.
In case of Cable selection, the TV can ask to
enter the Network ID supplied by the cable
provider. Enter this ID with the digit keys.

® When the installation is done, press Finish to

return to the Channel installation menu.

ÒPress Menu to quit the menu.

à Tip

When digital channels are found, the list of installed
channels may show some empty channel numbers.
If you want to rename, reorder or uninstall stored
channels, see section 6.3 Rearrange channels.

Step 5 Clock, time zone and daylight saving

selection

Only available when the country selected supports
digital broadcasts.
Go to a next step if this step is not applicable.

‡ Press œ to select Clock.
® Press π to enter.
ÒPress o or œ to select Auto clock mode.
† Press π to enter.

Auto clock mode

Select Automatic to instruct your TV to always get
the time correctly.Time zone and Daylight saving
correction are automatically set.
Select Manual when Universal Time Coordinated
(UTC) is not available in your area.

Time zone/Daylight saving

When you selected Auto clock mode manually,
select your local time zone and choose between
Standard (winter) and Daylight saving time
(summer).

on

k

ode

e

g

ces

.

p

ces

ecoder

k

26 Channel installation

Installati

Preferen

onnections assist
Rename devi

Audio setu

D

loc

Factory settings

loc

Auto clock m

Time zon

Daylight savin

6.2 Analogue: Manual installation

You can tune-in analogue TV channels channel by
channel manually with Manual installation.

6.2.1 Select the system

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Analogue: Manual installation.

ÒPress π to enter the Manual installation menu.

System is highlighted.

† Press π to enter the System list.
º Press o or œ to select your country or part

of the world where you are now located.

◊Press p to return to the Manual installation

menu.

6.2.2 Search for and store a new channel

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Analogue: manual installation >
Search.

ÒPress π to enter the Search menu.
† Press the red key to enter the frequency

yourself or press the green key to search for a
next channel.

à Tip

If you know the frequency, enter the three numbers
of the frequency with the number keys of the
remote control.

º Press p when the new channel has been

found.

◊Select Store as new channel to store the new

channel under a new channel number.

‹Press π to enter.
≈Press

OK.

Done appears.

ÚPress Menu to quit the channel installation

menu.

6.2.3 Fine tune a channel

Fine tune a found channel when the reception is
poor.

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Analogue: manual installation >
Fine tune.

ÒPress π to enter the Fine tune menu.
† Press o or œ to adjust the frequency
º Press p when you finished fine tuning.
◊Select Store current channel to store the fine

tuned channel under the current channel
number.

‹Press π to enter.
≈Press

OK. Done appears.

ÚPress Menu to quit the Channel installation

menu.

6.3 Rearrange stored channels

To rename, reorder, uninstall or reinstall stored
channels.

6.3.1 Rename a channel

Assign or change a channel name to a channel for
which a name has not yet been entered.

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Rearrange.

ÒPress π to enter the channel list.
† Press o or œ in the channel list to select the

channel you want to rename.

º Press the red key.
◊Press p or π to select a character or o or œ to

change the characters. Space, numbers and other
special characters are located between z and A.

‹Press the green key or

OK to finish.

à Tip

To delete all characters, press the yellow key.
To delete the highlighted characters, press the blue
key.

6.3.2 Uninstall or reinstall a channel

To uninstall a stored channel so that it is no longer
possible to tune to.
Reinstall an earlier uninstalled channel.

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Rearrange.

.

m

h

e

.

.

e

ge

ge

Channel installation 27

ENGLISH

hannel install...Analogue: Manual..

Automatic install..

Installation updat

Start-up messa

Rearran

Syste

Searc

Fine tun

Store as new ch..

ÒPress π to enter the channel list.
† Press o or œ in the channel list to select the

channel you want to uninstall or reinstall.

º Press the green key to uninstall or reinstall the

channel.

◊Press Menu to quit the menu.

6.3.3 Reorder the channels

Change the order of the stored channels.

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Rearrange.

ÒPress π to enter the channel list.
† Press o or œ in the channel list to select the

channel you want to reorder.

º Press the yellow key to move up the highlighted

channel in your channel list.

◊Press the blue key to move down the

highlighted channel in your channel list.

‹Press Menu to quit the menu.

6.4 Channel management

6.4.1 Automatic search

Once a day, early in the morning, the TV searches
for all available TV channels automatically. Leave
your TV in standby.
Earlier found channels are updated and new
channels are stored. Channels not found by the
search anymore are removed from the channel list.
When Channel management has found or removed
channels, a message at TV start up is shown.You
can activate or deactivate this message.

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Startup message.

ÒSelect On or Off.

6.4.2 Manual search

You can install the updates at any time.

‡ Press Menu.
® Select Setup > Installation > Channel

installation > Installation update.

ÒPress π to enter the Installation update menu.
† Press

OK.

º Press the green key to start.

The update starts and may take a few minutes.

◊When the update is completed, press the red

key to return to the Channel installation menu.

‹Press Menu to quit the menu.

6.5 Digital reception test

If you receive Digital TV broadcasting you can verify
the quality and signal strength of a specific channel.

‡ Select a channel.
® Press Menu.
ÒSelect Setup > Installation > Channel

installation > Digital:Test reception.

† Press π to enter
º Press

OK.

◊Press the green key to start the test.

Information on the quality and the signal
strength of this channel is shown.

‹Use the cursor keys to change the frequency to

improve the signal or enter a new frequency
directly with the digit keys.

≈Press the green key to store the frequency if

the signal quality and strength are good.

ÚPress the red key to return to the Channel

installation menu.

œ Press Menu to quit the menu.

à Tip

To achieve the best results, contact a specialised
antenna installer.

6.6 Factory settings

You can want to return to the original factory
settings. Only picture and sound settings are reset.

‡ Press Menu.
® Select Setup > Installation > Factory settings.
ÒPress π to enter the Factory settings menu.
† Press

OK.

º Press Menu to quit the menu.

28 Channel installation

Side connectors

1 Headphones

Stereo Mini jack

2 Audio L/R

Audio L/R input to be used together with Video
or S-Video on the side of the TV.

3 Video

Video input to be used together with the
Audio L/R on the side of the TV.

4 S-Video

S-Video input to be used together with the
Audio L/R on the side of the TV.

5 USB

USB connector.

6 HDMI Side

HDMI input

7 Common interface

Slot for Conditional Access Modules (CAM)

Back connectors

8

EXT1, EXT2

Scart connectors for DVD,VCR, Digital receiver,
Game console, etc.

9

EXT3

Component Video Y Pb Pr and Audio L/R
connectors for DVD, Digital receiver or Game
console, etc.
VGA and Audio L/R connectors for a PC.

10 Service UART

For service only.

11

Digital Audio Out

Sound output cinch connector for a Home
Theatre System, etc.

12

Audio Out L/R

Sound output cinch connectors for a Home
Theatre System, etc.

13 Antenna input
14 HDMI 1, HDMI 2, HDMI 3

HDMI input connectors for Blu-ray Disc player,
HD Digital receiver or HD Game console, etc.

15 Audio L/R In [DVI to HDMI]

Audio In L/R connectors to be used together
with a DVI to HDMI connection.

Connections 29

ENGLISH

7 Connections

7.1 Connection overview

7.2 About connections

7.2.1 What you need to know

Connect your device with the highest possible
quality connection.
Look for the highest quality connection on your
device. Use that connection to your TV.

HDMI - Highest quality ★★★★★
An HDMI connection has the best picture and
sound quality. One cable combines video and audio
signals. Use HDMI for HD ( High Definition) TV
signals. HDMI with EasyLink offers easy operating
of your connected devices when these have the
HDMI CEC standard. See section 7.2.2 EasyLink
A device connected with HDMI to the TV can only
send out audio and video signals to your TV.The
device cannot receive or record audio and video
from your TV.

HDMI cable (max. 5m)

à Tip

DVI to HDMI – Higher quality ★★★★

Use a DVI to HDMI adaptor if your device has only
a DVI connection.
Connect an Audio L/R cable to Audio In L/R (DVI
to HDMI) for sound.
You need to assign this Audio In (DVI to HDMI)
connector to the HDMI 1, 2 or 3 connector you
are using for this device. See section 7.5.2 Audio
setup.

r Note

HDMI supports HDCP (High-bandwidth Digital
Contents Protection). HDCP is a copy protection
signal that comes with HD content (DVD disc or
Blu-ray Disc).

YPbPr – Higher quality ★★★★

Use the Component Video YPbPr connections
together with Audio Left and Right. Match the cable
colours when you connect.
YPbPr can handle HD TV signals.

Component Video Audio L/R cable
YPbPr cable - Red, White

- Red, Green, Blue

Scart - Good quality ★★★
One cable combines video and audio signals.
Scart connectors can handle RGB video but no HD
TV signals.

Scart cable

S-Video - Good quality ★★
Use an S-Video cable together with an Audio L/R
(cinch) cable. Match the cable colours when you
connect.

An S-Video cable Audio L/R cable

- Red, White

30 Connections

Video - Basic quality ★
Use a Video (cinch) cable together with an Audio
L/R (cinch) cable. Match the cable colours when
you connect.

Combined Video - yellow and Audio L/R cable

- red and white

7.2.2 HDMI with EasyLink

Connected devices that are compliant with the
HDMI CEC standard can work together.

‡ Press Menu > Setup > Installation >

Preferences and press π to enter the list.

® Press o or œ to select EasyLink.
ÒPress π to enter.
† Press o or œ to select On or Off.
º Select On to activate EasyLink.

EasyLink might not work with devices from other
brands.

One touch play

Insert a DVD disc and press Play.The TV switches
on from standby and shows the DVD programme
automatically.

System standby

Press the B key on the remote control for more
than 2 seconds to switch the connected devices in
standby.

System audio control

When you connect an audio system you can listen
to the sound from your TV through your audio
system while the TV speakers are muted. See
section 5.4.5 Sound settings,TV speakers.

rNote

Ensure that all HDMI-CEC features in the HDMI­CEC devices (for ex. Home Theatre System) are
properly set up.

7.2.3 Display synchronised audio out

For the best match of image and sound in speech
on screen, connect a Home Theatre System to
Audio Out L/R or Digital Audio outputs. See
diagrams 7.4.4 and 7.4.8.
Do not connect the audio signal of a DVD player,
digital receiver or other audio/video device directly
to the Home Theatre System.

7.3 Connect with the
Connection assistant

(if available)

Use the Connection assistant to show you how to
connect your devices to your TV. It sets all
necessary settings automatically.

You can also connect your devices without the use
of the Connection assistant. See section 7.4
Connect without the Connection assistant.

‡ Press Menu.
® Select Setup > Installation > Connection

assistant.

ÒPress π to start the Connection assistant.
† Press OK.

7.4 Connect without the
Connection assistant

The connections shown in this section are
recommendations for the most used cases. Other
solutions are possible.
When a device is connected the TV needs to know
what connection you made. See section 7.5
Connection setup.

Connections 31

ENGLISH

7.4.1 DVD player

Use a scart cable to connect the device to the

EXT1 input at the back of the TV.

7.4.2 DVD Recorder or Digital Receiver

Use a scart cable and 2 antenna cables.

7.4.3 DVD Recorder and Digital Receiver

Use 3 scart cables and 3 antenna cables.

32 Connections

SERVICE

UART

DIGITAL

AUDIO

EXT 3

VGA +
YPbPr

L

OUT

AUDIO

OUT

R

VGA

YPb

EXT 2 EXT 1

Pr

L

R

VGA/YPbPr AUDIO

SERVICE

UART

DIGITAL

AUDIO

EXT 3

VGA +
YPbPr

L

OUT

AUDIO

OUT

R

VGA

YPb

EXT 2 EXT 1

Pr

L

R

VGA/YPbPr AUDIO

DVD Player

OUT

IN

SERVICE

UART

DIGITAL

AUDIO

EXT 3

VGA +
YPbPr

L

OUT

AUDIO

OUT

R

VGA

YPb

EXT 2 EXT 1

Pr

L

R

VGA/Y PbPr AUDIO

DVD Recorder / Digital receiver

OUT

N

I

Receiver / Cable boxDVD Recorder

OU

T

IN

7.4.4 DVD Recorder and Home Theatre
System

Use a scart cable, 2 antenna cables and 1 digital
audio (cinch) cable.

7.4.5 DVD Recorder and DVD Home
Theatre System

Use 2 scart cables, 2 antenna cables and 1 digital
audio (cinch) cable.

7.4.6 Satellite receiver

Use a scart cable and 2 antenna cables.

Connections 33

ENGLISH

EXT 3

VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/YPbPr AUDIO

VGA +
YPbPr

Home Theatre SystemDVD Recorder

DIGITAL
AUDIO
IN

OUTIN

DIGITAL

AUDIO

OUT

EXT 3

VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/Y PbPr AUDIO

VGA +
YPbPr

Satellite receiver

EXT 3

VGA

SERVICE

UART

OUT

YPb

Pr

L

R

L

R

EXT 2 EXT 1

AUDIO

OUT

AUDIO

DIGITAL

VGA/Y PbPr AUDIO

VGA +
YPbPr

DVD Home Theatre SystemDVD Recorder

DIGITAL
AUDIO
IN

OUTIN

DIGITAL

AUDIO

OUT

7.4.7 HD Digital receiver / HD satellite

receiver

Use an HDMI cable and 2 antenna cables.

7.4.8 DVD-R, Home Theatre System and

Digital receiver

Use 3 scart cables, 3 antenna cables and 1 audio
(cinch) cable.

7.4.9 Blu-ray Disc player

Use an HDMI cable.

34 Connections

LR

AUDIO

IN

HDMI

DVI

HDMI 1 HDMI 2 HDMI 3

[]

SERVICE

UART

DIGITAL

DIGITAL

AUDIO

AUDIO

OUT

EXT 3

VGA +
YPbPr

L

OUT

AUDIO

OUT

R

VGA

YPb

EXT 2 EXT 1

Pr

L

R

VGA/YPbPr AUDIO

HDMI

OUT

OUT

IN

HD Digital receiver / HD Satellite receiver

OUT

IN

OUT

IN

DIGITAL
AUDIO
IN

Home Theatre SystemDigital ReceiverDVD Recorder

LR

AUDIO

IN

HDMI

DVI

HDMI 1 HDMI 2 HDMI 3

[]

HDMI

OUT

Blu-ray Disc player

7.4.10 Game console

The most practical connections for a game console
are at the side of the TV.

rNote

To prevent picture delay, set the TV in game mode.
Press Menu > TV menu > Smart settings > Game.

Connected at the side of the TV

Use the HDMI connection or the S-Video and
Audio L/R connections or the Video and Audio L/R
connections.

Connected at the back of the TV

Use an HDMI connection or the EXT3-YPbPr and
Audio L/R connections for HD quality.

7.4.11 Camcorder

The most practical connection for a camcorder is at
the side of the TV.

Connected at the side of the TV

Use the HDMI connection or the Video and Audio
L/R connections or use the S-Video and Audio L/R
connections.

Connected at the back of the TV

Use an HDMI connection or the EXT3-YPbPr and
Audio L/R connections for HD quality.

Connections 35

ENGLISH

EXT 3

VGA

YPb

Pr

L

R

VGA/Y PbPr AUDIO

VGA +
YPbPr

HDMI 1 HDMI 2 HDMI 3

EXT 3

VGA

YPb

Pr

L

R

VGA/YPbPr AUDIO

VGA +
YPbPr

HDMI 1 HDMI 2 HDMI 3

7.4.12 Personal Computer

You can connect your PC directly to the TV.
The TV works as a monitor of your PC.
As a monitor the PC can be connected at the side
with a DVI to HDMI adaptor or with a PC to TV
cable. Alternatively you can connect the PC at the
back with the VGA connection.

ç Caution

Before connecting the PC, set the PC monitor
refresh rate to 60Hz.

à Tip

Set the TV picture format to Unscaled in the
Picture format menu for maximal PC picture
sharpness. See section 5.3.4 Widescreen picture

format.

DVI to HDMI connection

Use a DVI to HDMI adaptor to connect to the
HDMI side connection.
Connect the Audio L/R at the side for sound.

PC to TV connection

Use a PC-TV out cable to S-Video and Audio L/R
cable to connect to the side of the TV.

VGA connection

Use a VGA cable to connect the PC to the EXT3
connection at the back of the TV.
Connect the Audio L/R to the EXT3 Audio L/R.

For supported PC monitor resolutions, see section
8 Technical data.

36 Connections

EXT 3

VGA

VGA +
YPbPr

AUDIO L/R

VGA

b

Pr

L

R

VGA/YPbPr AUDIO

VGA

AUDIO L/R

AUDIO L/R

DVI-HDMI

HDMI

AUDIO L/R

AUDIO L/R

S-VIDEO

AUDIO L/R

S-VIDEO

7.5 Connection setup

The TV needs to know what connections you have
made and which device is connected to which
connector.
If you have used the Connection assistant the
connection setup is already done.

7.5.1 Naming your devices

Name the connected devices for easy selection and
best signal handling.
Assign the type of device (DVD,VCR, Game, ...) to
the connector you use for that device.

‡ Press Menu.
® Select Setup > Installation> Rename devices.
ÒPress π to enter the list.
† Press o or œ to select the connector you

used for the device you connected.

º Press π.
◊Press o or œ to select the type of device.
‹Press Menu to quit the menu.

7.5.2 Audio setup

If you use the Audio In L/R (DVI to HDMI)
connector for a device connected to HDMI at the
back of the TV, assign this Audio In to the HMDI 1,
2 or 3 where the device is connected.

‡ Press Menu.
® Select Setup > Installation > Audio setup.
ÒPress π twice.
† Press o or œ to select the HDMI connection

to link with this Audio In.

7.5.3 Decoder channels

Decoders that decode an antenna channel are
connected to EXT1 or EXT2 (scart).
You have to assign the TV channel as a channel to
be decoded.Then assign the connection where the
decoder is connected

‡ Press Menu.
® Select Setup > Installation > Decoder >

Channel.

ÒPress π to enter the list.
† Press o or œ to select the channel to decode.
º Press p and go back to select Status.
◊Press o or œ to select the connector used by

the decoder.

‹Press Menu to quit the menu.

on

ecoder

l

ces

.

p

ces

ecoder

k

p

/R

e

3

/R

Connections 37

ENGLISH

Installati

Preferen

onnections assist
Rename devi

Audio setu

D

loc

Factory settings

D

hanne

Status

Audio setu

Audio in L

Audio in L

Non

HDMI

7.6 Preparing for digital
services

Scrambled digital TV channels can be decoded with
a Conditional Access Module (CAM) and a Smart
card provided by a digital TV service operator.The
CAM may enable several services depending on the
operator you choose (e.g. Pay TV).
Contact your digital TV service operator for more
information and terms.

7.6.1 Insert a Conditional Access Module ­CAM

) Warning

Switch off the TV before inserting the CAM.
Look on the CAM for the correct inserting
direction. Incorrect inser tion can damage the CAM
and the TV.

‡ Gently insert the CAM into the Common

Interface slot at the side of your TV as far as it

will go.

® Leave the CAM in the Common Interface slot

permanently.

It can take a few minutes before a CAM is
activated. Removing the CAM will deactivate the
digital TV service.

7.6.2 Common interface menu

From this menu you access the CAM service you
have installed.The applications and their function,
the content and the messages on screen come
from the CAM service provider.

‡ Press Menu.
® Select Features > Common interface.

This menu option is available when a CAM is
inserted and has made contact with the provider.

38 Connections

COMMON INTERFACE

Technical data

8Technical data

Picture / Display

• Display type: LCD Full HD W-UXGA

•Panel resolution: 1920x1080p

• Pixel Plus picture enhancement

• 1080p 24/25/30/50/60Hz processing

• 100 Hz Clear LCD (if present)

Supported display resolutions

• Computer formats

Resolution Refresh rate
640 x 480p 60 Hz (VGA/HDMI)
600 x 800p 60Hz (VGA/HDMI)
1024 x 768p 60 Hz (VGA/HDMI)
1280 x 768p 60 Hz (VGA/HDMI)
1360 x 765p 60 Hz (VGA/HDMI)
1360 x 768p 60 Hz (VGA/HDMI)
1280 x 1024p 60 Hz(HDMI)
1920 x 1080i 60 Hz (HDMI)
1920 x1080p 60 Hz (HDMI)

• Video formats

Resolution Refresh rate
480i 60Hz
480p 60Hz
576i 50Hz
576p 50Hz
720p 50Hz, 60Hz
1080i 50Hz, 60Hz
1080p 24Hz, 25Hz, 30Hz
1080p 50Hz, 60Hz

Tuner / Reception / Transmission

• Antenna input: 75ohm coaxial (IEC75)

• TV system: DVD COFDM 2K/8K,

(MPEG2, MPEG4 if available)

• Video playback: NTSC, SECAM, PAL

•DVB: DVB Terrestrial/DVB cable

(see selected countries on the TV typeplate)

Sound

• Sound system:

- Virtual Dolby Digital

- BBE

Multimedia

• Connections: USB

• Playback formats: MP3, Slideshow (.alb)

JPEG, MPEG1, MPEG2.

Supported USB/Memory device formats

•FAT 16, FAT 32, NTFS.

Remote control

•Type: RC2143605/01

• Batteries: 2 Size AA-R6-1,5V type

Connectivity

Back

• EXT1 (scart): Audio L/R, CVBS in, RGB

• EXT2 (scart): Audio L/R, CVBS in, RGB,

• EXT3:Y Pb Pr or VGA, Audio L/R

• HDMI 1 in (HDMI 1.3a for all HDMI
connections)

• HDMI 2 in

• HDMI 3 in

• Audio In L/R (DVI to HDMI)

• Audio Out L/R - display synchronised

• Digital Audio out (coaxial-cinch-S/PDIF) ­display synchronised

Side

• HDMI side in

• S-Video in (Y/C)

• Video in (CVBS)

• Audio L/R in

• Headphone (stereo mini jack)

• USB

• Common interface slot

Power

• Mains power: AC 220-240V (±10%)

•Power and standby power consumption:
See technical specification on www.philips.com

• Ambient temperature: 5°C - 35°C

Specifications are subject to change without notice.
For more specification details of this product see
www.philips.com/support.

39

ENGLISH

Dimensions and weights (approx.)

TV model 37PFL7403 42PFL7403 47PFL7403

- width 940 mm 1046 mm 1163 mm

- height 585 mm 645 mm 712 mm

- depth 99 mm 88 mm 104 mm

- weight ± 20 kg ± 21 kg ± 26 kg
TV + stand

- width 940 mm 1046 mm 1163 mm

- height 677 mm 716 mm 786 mm

- depth 262 mm 262 mm 325 mm

- weight ± 22,5 kg ± 25,5 kg ± 33,5 kg

9Troubleshooting

Television and remote control

The TV does not switch on

•Verify the mains cord connection.

•Verify if the batteries of the remote control are not
empty or weak.Verify their + / - orientation.
You can use the keys on the TV to switch the TV on.

• Unplug the mains cord, wait a minute and plug it
back in.Try again to switch on.

The TV does not react on the remote control

•Verify if the batteries of the remote control are not
empty or weak.Verify their + / - orientation.

• Clean the remote control and TV sensor lens.

The TV switches off and the red light blinks

• Unplug the mains cord, wait a minute and plug it
back in.Verify if there is enough space for ventilation.
Wait until the TV has cooled down.When the TV
does not restart to standby and the blinking occurs
again, call our Customer Care.

You forgot your code to unlock Child lock

• See section 5.7.3 Set code / Change code.

Wrong language in the TV menu ?

Follow these steps to change the language.

‡ Press Menu on the remote control.
® Use œ to select the last menu line.
ÒPress πthree times.
† Press o or œ to select your language.
º Press OK.
◊Press Menu to quit the menus.

TV channels

Some TV channels are gone

•Verify if the correct channel list is chosen.

•A channel could be uninstalled in the Rearrange

menu.

No digital channels found during installation

•Verify if the TV supports DVB-T or DVB-C in your
country. See the label “Digital TV Country
Compatibility” on the back of the TV.

Picture

The sound is on, but there is no picture

•Verify the contrast or brightness setting in the menu.

The TV picture is poor

•Verify if the antenna is connected properly.

• Non-earthed audio devices, neon lights, high
buildings or mountains can influence the picture
quality.Try to improve the picture by changing the
antenna direction or place devices away from the
TV.

•Verify if the correct TV system is chosen in the
Manual installation menu.

• If only a certain channel is poor, try to fine tune this
channel in the Fine tune menu. See section 6.2.3.

The picture has poor colour

•Verify the colour settings in the Picture menu.
Select any of the Reset to standard settings in the
Smart settings menu. See section 5.3.1.

•Verify the connections and cables of the connected
devices.

Picture delay when a game console is connected

•To prevent picture delay, set the TV in game mode.
Press Menu > TV menu > Smart settings > Game.

The TV does not remember my settings when I
switch back on

•Verify if the TV is set to Home in the TV menu >
Setup > Installation > Preferences > Location
menu.

The picture does not fit the screen, it is too big or
too small

• Select a more fitting picture format in the Picture
format menu.
See section 5.3.4 Widescreen picture format.

• Name your connected device in the Connections
menu to obtain the best signal handling.
See section 7.4.1 Naming your devices.

The picture position on screen is not correct

• Some picture signals from some devices do not fit
the screen correctly.You can shift the picture with
the navigation key on the remote control.Verify the
signal output of the device.

40 Troubleshooting

Sound

There is a picture but no sound

•Verify the volume is not set to 0.

•Verify the sound has not been muted with the ¬
key.

•Verify if all cables are connected properly.

• If no sound signal is detected, the TV automatically
switches off the sound.
This is proper operation and is not a malfunction.

The sound is poor

•Verify if the sound is set to Stereo.

•Verify the Equalizer in the Sound menu.

• Select any of the Smart settings in the menu.

The sound comes from one speaker only

•Verify if the Balance is not set to extreme left or
right.

Sound delay when A HTS-DVD device is connected

• See the user manual of the HTS-DVD device to
adjust the audio sync delay.
If you cannot set A delay, switch off HD Natural
Motion in the Picture > Pixel Plus menu. See section

5.4.3 Picture settings.

HDMI connections

Tr ouble with devices connected with HDMI

• The HDMI - HDCP procedure might take a few
seconds before the TV shows the picture from a
device.

• If the TV does not recognise the device and the
screen shows no picture, try switching from one
device to another and back again to restart the
HDCP procedure.

• If sound interruptions occur persistently, see the user
manual of the device to verify the output settings. If
that does not help, connect an additional audio
cable.

• If a DVI to HDMI adaptor is used, verify if an
additional audio connection is in place to complete
the DVI connection.

• HDMI with EasyLink does not work

-Verify if the connected device supports the HDMI

CEC standard. See the user manual that comes
with the device.

-Verify if the HDMI cable is properly connected.

-Verify if Easylink is activated in the Setup,

Installation, Preferences menu.

- Ensure that the System audio control in your

HDMI CEC audio devices is properly set up. See
the user manual that comes with your audio
device.

USB connection

The TV does not show the USB device content

• Set your device (camera) to ‘Mass Storage Class’
compliant.

• The USB device may need specific driver software.
Unfortunately this software cannot be downloaded
to your TV.

I cannot see my files in the Multimedia menu.

• Not all audio and picture files are supported. See
section 8 Technical data.

Photo and music files do not playback smoothly

• The transfer performance of the USB device limits
the transfer rate.

Personal computer

The PC display on my TV is not stable or is not
synchronised

•Verify if the correct resolution mode is selected on
your PC. See section 8 Technical data.

PC files do not play

• See section 8 Technical data for supported file
formats.

If your problem is not solved

Switch your TV off and on again, that may help. If not,
call our Consumer Care or consult our website
www.philips.com/support.

Find the Consumer Care telephone numbers on the
back cover of this manual.

Please, have the TV Model and Product Number
ready before you call.

You can find these numbers on the packaging label or
on the typelabel on the back and bottom of the TV.

) Warning

Never try to repair the TV yourself.

Troubleshooting 41

ENGLISH

10 Index

100 Hz Clear LCD 5,13

Active control 13
Advanced sharpness 13
Analogue

manual installation 27
TV channels 27

Antenna

cable 7
connect 7

with devices 29
Audio setup 37
Auto clock mode 26
Auto format 14
Automatic installation 25
Auto surround 15
Auto Volume levelling 15

Balance

sound 14
Batteries 3,7
Blacklevel 13
Blu-ray Disc 34
Brightness 12

CA module 38
Cable

HDMI 30

Scart 30

S-Video 30

Video 31

YPbPr 30
Camcorder 35
Camera (photo) 35
Care of the screen 3
Change code 19
Channel

all channels list 17

favourite list 17

installation 25

lock 19
Channel

management 28

up/down 11

previous 12

rearrange 28

store / install 27

Child lock 19
Clock 26
Code 19
Colour

enhancement 13
menu 12
keys 4,10

Common interface (CAM)

menu 38
slot 29,38

Connection

best 30
overview 29

set up 37
Contrast 12
Country selection 25
Custom lock 19
Custom tint 13

Daylight saving 26
Decoder channel 37
Delta volume 15
Device

connecting 31

naming 37

watch 9
Digital

audio out 29

subtitle language 20

receiver 32

text services 16

test reception 28
Dual I/II 14
Dual screen 11
DVB-T 5
DVD

connect 32

playback 9

player 32

recorder 32,33
Dynamic

backlight 13

contrast 13

EasyLink 31
Electronic Programme Guide 18
Energy saving 12
Equalizer 14

External 1,2,3 (EXT) 29

Factory settings 28
Favourite channel lists 17
Fine tune 27

Game console 35

HDMI connection 30
HD digital receiver 34
HD natural motion 13
Headphone

connect 4,29

volume 15
Hearing impaired 25
Home theatre system 33
Hue 12

Installation

automatic 25

manual 27

menu 25

update 28

Kensington Security Slot 5
Key(s)

colour 10

on TV 4

on remote control 4,10

Language

menu 25

audio 14
Language

subtitle 20
Light sensor 13
Location 40
Locks 19

Menu key 11
Mono 14
Movie expand 14
MPEG artefact reduction 13

M

L

K

I

H

G

F

E

D

C

B

A

42 Index

Music 21
Mute key 10

Naming devices 37
Noise reduction 13

OK key 10
On timer 19

Personal Computer

connect 36

display resolutions 39
Photo viewer 21
Picture

album 21

format 14

menu 13
Pixel Plus 13
Position the TV 5
Power cable 7
Preferred audio format 25

Radio channel 22
Rearrange channels 27
Recorder 32
Recycling 3
Remote control

batteries 7

overview 10
Rename 27
Reorder 27

Safety 3
Satellite receiver 34
Scart connection 30
Screen cleaning 3
Search

channels 27

teletext pages 16
Set code 19
Settings assistant 11
Sharpness 13
Sleeptimer 19
Smart settings 11
Software update 22

Sound

menu 14

surround mode 15
Standby 10,19
Super zoom 14
Stationary images 3
Stereo 14
Subtitle 20

language 20

shift 14
Switch on 8

Ta ble of Pages T.O.P 15
Technical data 39
Teletext 15

digital 16

dual screen 16

language 15

menu 16

page 15

teletext 2.5 16
Time zone 26
Timers 19
Tint 13
Troubleshooting 40
TV speakers 14

Unmount the TV stand 6
Unscaled 14
USB

connector 29

device 20

photo viewer 21

VCR

connect 32
VGA 36
Video cable 31
Video formats 39
Visual impaired 25
Volume

bar 14

key 10

visual impaired 14

Whitepoint 13
Widescreen picture format 14

YPbPr 30

Y

W

V

U

T

S

R

P

O

N

Index 43

ENGLISH

Information about how to
re-tune your TV during the

digital TV switchover.

this use

e

Television in the UK is going digital, bringing us all
more choice and new services. Starting in late 2007
and ending in 2012, television services in the UK
will go completely digital, TV region by TV region.

Please see the next page to find out when your area
switches to digital.

Digital UK is the independent, non-profit organisa­tion leading the process of digital TV switchover in
the UK. Digital UK provides impartial information on
what people need to do to prepare for the move to
digital, and when they need to do it.

How the switchover affects your
TV equipment:

Your new TV has a digital tuner built in, which
means it is ready to receive the Freeview signal by
simply plugging it into your aerial socket (check if
you can get digital TV through your aerial now, or
whether you'll have to wait until switchover, at
www.digitaluk.co.uk).

When the TV switchover happens in your area, there
are at least two occasions when you will need to
re-tuner your TV in order to continue receiving your
existing TV channels, and also to pick up new ones.

44

r manual saf

- you'll need it.

pp

?

d

y

es.

Visit us at digitaluk.co.uk

50

7

depends on the transmitter
you are served by. To check
when you switch, go to
Digital UK's postcode
checker on
www.digitaluk.co.uk.
Check your ITV news service
or look at Teletext page 106
to see what TV region you're
in.

How to re-tune:

Digital UK, the body leading the digital TV switch­over, will advise you when you need to re-tuner
during the switchover.
If you choose to connect your TV to satellite or
cable with a digital box then it will no be affected
by switchover, and you won't need to re-tune.

If you have any questions, please contact your
equipment supplier or call Digital UK on ...
0845 6 50 50 50 or visit www.digitaluk.co.uk

To find out how to re-tune your TV, check this user
manual for details.
Go to section 6.1 Automatic installation and go to
Step 4 Install TV and radio channels.

If you do not re-tune your channels when advised to
do so by Digital UK, you may lose some or all of`
your channels until you do re-tune. You should
re-tune your TV every few months to check for any
new channels.

If you are missing any channels, it may be that they
are not available in your area, or that your aerial
needs upgrading.

45

ENGLISH

When does switchover ha

* Copeland switches on October 17, 200

The exact date you switch

en

ll us on

Calls charged at BT rate of 3p pr minute daytime an
1p per minute evenings and weekends. Rates may var
for calls from non-BT lin

45 6 50 50

Printed in Belgium

Contact information

Type no.

Product no.

België / Belgique
078 250 145 €0.06/min

Danmark
3525 8759 Local

Deutschland
01803 386 852 €0.09/min

France
0821 611 655 €0.09/min

E§§A™

0 0800 3122 1280 ¢ˆÚ¿Ó

España
902 888 784 €0.10/min

Ireland
01 601 1777 Local

Italia
8403 20086 €0.08/min

Luxembourg
40 6661 5644 Locale

Nederland
0900 8407 €0.10/min

Norge
2270 8111 Local

Österreich
0810 000205 €0.07/min

Portugal
2 1359 1442 Local

Schweiz / Suisse / Svizzera
0844 800 544 Local

Svenska
08 5792 9100 Local

Suomi
09 2311 3415 Local

United Kingdom
0870 900 9070 Local