How it Works
PHILIPS
Loading...
36PW9308
BROCHURE
2 pgs295.86 Kb0
Brochure
2 pgs198.18 Kb0
Service manual & schematics
107 pgs6.54 Mb0
User Manual
18 pgs936.95 Kb0
User Manual
24 pgs1.32 Mb0
User Manual [cs]
18 pgs969.8 Kb0
User Manual [da]
18 pgs954.47 Kb0
User Manual [de]
2 pgs283.14 Kb0
User Manual [fi]
18 pgs956.39 Kb0
User Manual [nl]
18 pgs947.18 Kb0
User Manual [ru]
96 pgs3.69 Mb0

PHILIPS 36PW9308, 28PW9308 User Manual

Download
Contents
Installation
Help?
If this instruction manual does not give an answer or if ‘Tips’ do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline.
Model: 28/32/36PW9308
Product No: AG .....................................
R End of life directives
Philips is paying a lot of attention to producing environmentally-friendly in green focal areas.Your new TV contains materials which can be recycled and reused. At the end of its life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimise the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.
Preparation ........................................................................................ 2
Keys on top of the TV .................................................................... 2
Your remote control ................................................................... 3-4
To use the menus.............................................................................. 5
Select the menu language and country ....................................... 5
Store TV channels ............................................................................ 6
Automatic installation ..............................................................6
Give name .................................................................................. 6
Reshuffle the programme list.................................................. 7
Select favourite TV channels .................................................. 7
TV setup ............................................................................................. 7
General ....................................................................................... 7
Source .......................................................................................... 8
Decoder ...................................................................................... 8
Demo .................................................................................................. 8
Operation
TV menu
Sound menu ............................................................................. 10
Teletext guide ........................................................................... 11-12
Teletext ...................................................................................... 12-13
Connect peripheral equipment
Connecting and selecting equipment ..................................14-15
Audio- and video equipment keys ............................................. 16
Tips .................................................................................................. 17
English
EasyLink features are based on the “one touch operation” approach. This means that a sequence of actions are executed at the same time in both the television and the video cassette recorder, provided both are fitted with the EasyLink function and connected with the eurocable supplied with your video recorder.
1
Preparation
VOLUME
MENU
V
-+
PROGRAM
P
­+
MENU/OK
& Place the TV on a solid surface.
! 28PW9308: 41 kg; 32PW9308: 59 kg; 36PW9308: 79 kg !
min.
1m
For ventilation, leave at least 5 cm free all around the TV. Do not place the TV on a carpet.To prevent any unsafe situations, do not place any objects on top of the TV. Avoid heat, direct sunlight and exposure to rain or water.
é Insert the aerial plug firmly into the aerial
socket x at the back of the TV. For best picture quality use the suppressor-aerial cable supplied.
“ Insert the mains plug of the TV in the wall
socket having a mains voltage of 220V-240V.
Keys on top of the TV
‘ Remote control: Insert the 2 batteries supplied
(Type R6-1,5V).
The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations.
( Switch the TV on : Press the power switch A
on the front of your TV. A green indicator on the front of the TV lights up and the screen comes on. If the TV is in standby mode, press the
-P+ keys or the red B
key on the remote control.
TV
Setup
Demo
Install
Exit
2
2
Picture Sound Features
Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV.
Press:
• the V - or + key to adjust the volume;
• the
-P+ keys to select the TV channels or sources.
The
MENU key can be used to summon the main
menu without the remote control.
Use:
• the V - and + keys and the
P- and P+ keys to
select menu items in the directions as shown;
• the
MENU key to confirm your selection.
Note: When activated via the only
Exit lets you dismiss the menu.
Navigate to
Exit and press the MENU key.
MENU key on top of the TV,
213
546
879
0
B
v
®
Ò
‡π
†
æ b
Ï
i
VCR DVD AMP
¬V PP
0
PIXEL PLUS
OK
MENU
U
Q
Ì
hb
S
q
SAT
i
Use of the remote control
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it. When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after 4 seconds or press
OK to remove immediately.
vSelect peripherals (p. 15)
VCR DVD AMP SAT
Audio- and Video equipment keys (p. 16)
®Ò‡π†
Audio- and Video equipment keys (p. 16)
® Record
See Record with your recorder with EasyLink, p. 16
UTime display
The time is displayed on the screen.
æTeletext guide on/off p. 11
OK Press this key
• to activate your choice, when in the menus.
• to display the programme list.
V To adjust the volume.
¬ Interrupt the sound or restore it.
iOn Screen information
Press to display information about the selected TV channel and programme.
Menu/Remote control info
When a menu is on screen, press
i to display info on the
selected menu item. For information on the remote control functions, while the menu info is displayed, press any key on the remote control. The normal function of the key is not executed.
B Standby
Press to switch the TV on or off. When switched off, a red indicator lights up.
QSurround mode Incredible surround
With stereo transmission, and when Incredible surround is selected, it seems as though the loudspeakers are spread further apart from one another.
Virtual Dolby surround
Optimal with Dolby surround signals. Enables you to experience the effect of Dolby surround Pro Logic, reproducing a rear sound effect. See Sound menu, 3D effect, p. 10.
Note:You can make the same selection in the Sound menu, surround mode, p. 10.
ÌCinema Go
See separate Cinema Link booklet supplied.
x Pixel Plus demo on/off
In the right part Pixel Plus and Digital Natural Motion are switched on.
bTeletext on/off p. 12
ÏMain menu see p. 5
P Programme selection
To browse through the TV channels and sources stored in the favourite list.
0/9 Digit keys
To select a TV channel. For a two digit programme number, enter the second digit within 2 seconds.To switch immediately to a selected one digit TV channel, keep the digit key pressed a bit longer.
33
213
546
879
0
B
v
®
Ò
‡π
†
æ b
Ï
i
VCR DVD AMP
¬V
P
P
0
PIXEL PLUS
OK
MENU
U
Q
Ì
hb
S
q
SAT
0Smart surf
With this key you can easily switch between 2 up to 9 different TV channels or sources. Press the
OK key or wait for the time out to dismiss the Smart surf
display.
bDual screen
& Press the b or æ key.
Press the
b key to show Teletext or Teletext Guide on the right of the
screen.
é • Picture/Teletext Guide:
- Press the cursor left/right to select a TV channel.
- Press the cursor down to move the puck to the blue ball in the left screen.
- Press
+P- to select another TV channel.
• Picture/Teletext: See Active screen selection, p. 12.
“ Press the b key to switch off dual screen.
hActive control see p. 9
qPicture format
Press this key repeatedly or press the cursor up/down to select another picture format:Auto format, Super zoom, 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle zoom or Wide screen.
Auto format Super zoom 4:3 Movie Expand 14:9
Movie Expand 16:9 Subtitle zoom Wide screen
Auto format makes the picture fill the screen as much as possible. In case of subtitles in the bottom black bar, Auto format makes the subtitles visible. If subtitles are only partly visible, press cursor up. In case of a broadcaster logo in the corner of the top black bar, the logo disappears from the screen.
Super zoom removes the black bars on the sides of 4:3 programs with minimal distortion.
When in Movie Expand 14:9, 16:9, Super zoom or Subtitle zoom picture format, you can make subtitles visible with the cursor up/down.
SFreeze
To freeze the picture.
4
To use the menus
B
v
®Ò‡π
†
æ b
Ï
VCR DVD AMP SAT
¬V
PIXEL PLUS
OK
MENU
UQÌ
PP
cursor to select adjustments
return or switch main menu on/off
OK key to
activate
Press the i key to get information about the selected menu item.
& Press the MENU Ï key on the remote control to summon
the main menu.At any moment you can exit the menu by pressing the
MENU Ï key again.
Note: If you have connected equipment with Cinema Link, more menu items are present.
Picture Sound Features
TV
Setup
Demo
Install
é Use the cursor in the up/down direction to select the TV,
Setup, Demo or Install menu.
Use the cursor left/right to select Picture, Sound or
Features.
Note: Sometimes not all the menu items are visible on the screen (indicated by a cluster of blue balls). Use the cursor down or right to reveal all items.
“ Use the cursor in the left/right direction to select the menu
item.
‘ Use the cursor up/down again to select the control you
want to select or to adjust.
Note: Items temporary not available or not relevant are displayed in a light grey colour and cannot be selected.
Installation
The installation menu contains the following items:
Language Country Automatic Manual Give name Reshuffle Favourite
Install
EasyLink
If your video recorder has an EasyLink function, during installation, the language, country and available channels are automatically transmitted to the video recorder.
Select the menu language and country
Language
English
Deutsch
Français
Country
Austria
Belgium
Croatia
Install
Install
install install programmes
& Press the MENU Ï key on the remote control.
é Use the cursor down to select Install. “ Use the cursor right to select Language.
Follow the instructions on screen.
‘ Use the cursor up/down to select your preferred language
and press the
( Use the cursor right to select Country.
§ Select the country where you are now located and press the
OK key.
Select
è Proceed with the Install menu.
OK key to confirm your selection.
Other when none of the countries applies.
5
Store TV channels
After language and country are set correctly, you can now search for and store the TV channels in two different ways:using Automatic Installation or Manual Installation (tuning-in channel by channel). Select your choice with the cursor right.
Automatic installation
Install
& Select Automatic install in the Install menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter your code to unlock all channels. (See TV, Features menu, Childlock, p. 10.)
é Press the cursor down.
The autoprogramming option label appears.
“ Press the cursor right.
Manual installation
Install
Automatic install
Install Start
Manual install
Selection mode System Programme Search Fine tune Store
Start
Searching for and storing TV channels is done channel by channel. You must go through every step of the Manual Installation menu.
& Select Manual install in the Install menu. é Press the cursor down.
Follow the instructions on screen.
Note: Search or direct selection of a TV channel. If you know the frequency, the C- or S-channel number, enter the 3 or 2 digits of the frequency or the channel number directly with the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed.
Repeat to search for another TV channel.
‘ The message Searching appears and the
progress of autoprogramming is displayed.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel Installation) is detected, a programme list appears.Without ACI broadcast, the channels are numbered according your language and country selection.You can use Reshuffle to renumber them. See p. 7.
It is possible that the cable company or the TV channel displays a broadcast selection menu. Layout and items are defined by the cable company or the TV channel. Make your choice with the cursor and press the
OK key.
Give name
Install
It is possible to change the name stored in the memory or to assign a name to a TV channel for which a name has not yet been entered.A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99.
6
Give name
VCR1 BBC1 BBC2
CNN
TVE
.....
® Space ® Delete
pπ
ABCDEFG 123 HIJKLMN 456 OPQRSTU 789 VWXYZ 0
® Shift ® Special
& Select Give Name in the Install menu and
press the cursor down.
é Select the programme number.
Note: keep the cursor up/down pressed to scroll through the programme list quickly.
“ Press the cursor right.
A keyboard appears on the screen. Press the cursor right to enter the keyboard. Press the cursor up/down, left/right to select the first character and press
OK. Repeat for
every character you want to enter. Select
Space to enter a space; Delete to erase
the highlighted character in the name entered;
Shift to display upper- or lowercase characters
on the keyboard; characters on the keyboard. Press
Special to display special
OK to
confirm.
‘ Press the cursor left repeatedly when you have
finished the name giving.
( Select another programme number and repeat
steps
“ to ‘.
Reshuffle the programme list
You can change the order of the stored TV channels.
& Select Reshuffle in the Installation menu. é Follow the instructions on screen.
Select Favourite TV channels
& Select Favourite programmes in the Install
menu.
é Select your programme number with the cursor
up/down.
“ Select Ye s or No with the cursor right. ‘ Repeat é and “ for every TV channel or
external you want to make a favourite or a non­favourite TV channel or external.
TV Setup
Setup
Menu background
Factory settings
Programme title
Teletext level 2.5
Set/Change code
General
Smart surf
& Select Smart surf. é With the cursor left/right, select
•
2 programmes if you want the 0 key to
toggle between the current and the previously selected channel,
•
9 programmes if you want the 0 key to
summon a list of up to 9 channels which can be selected,
To add/remove a channel or source:
Tune to the channel or source you wish to add or remove. Press the 0 key and press the cursor right to add or remove.
Note: If there are already 9 channels/sources in the list, the one at the bottom of the list will be removed.
Factory settings
This resets the picture and sound settings to their predefined factory values, but maintains the channel installation settings.
General Source Decoder
Smart surf
Tilt adjust
OSD
Auto surround
The Setup menu contains items that control the settings of the TV’s functions, features, services and peripherals you may have connected.
The
General menu allows you to change various settings that
are presumably adjusted less frequently than most other settings. The
Source menu allows you to select a source.
The
Decoder menu allows you to define one or more
programme numbers as decoder programme numbers.
Press the i key on the remote control to get information about the selected menu item.
OSD (On Screen Display)
See Use of the remote control, p. 3, i On screen information.
& Select OSD. é Select Normal to activate the continuous
display of the programme number. Also TV channel and programme information are extended. Minimum will display reduced channel information.
Note:When subtitles is switched on, see Features, p.10, continuous display of the programme number is not possible.
Teletext level 2.5
Some broadcasters offer the opportunity to see more colours, other background colours and nicer pictures in the teletext pages.
& Select Teletext level 2.5. é Press the cursor right to select Teletext level
2.5 On
“ Press the cursor right again to select Teletext
level 2.5 Off
to take advantage of this feature.
if you like the more neutral teletext layout. The selection made is valid for all channels which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext broadcast switches over to Teletext level 2.5.
7
Set/Change code
The Child lock feature (see TV, Features, p. 10) allows you to lock channels to prevent others from watching certain programmes.To watch locked channels, a 4-digit code must be entered. The Set/Change code menu item allows you to create or change a Personal Identification Number (PIN).
& Select Set/Change code. é If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu item is set to
Change code. Follow the
instructions on screen.
Important:You have forgotten your code !
& Select Change code in the General menu and
press
OK.
é Press the cursor right and enter the overriding
code 8-8-8-8.
“ Press the cursor again and enter a new
personal 4-digit code.The previous code is erased and the new code is stored.
Auto Surround
Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes. The TV automatically switches to the best surround sound mode when switched
On.
Auto Surround is
Source
Setup
This menu allows you to indicate the peripheral you connected to one of the external inputs.
Source
EXT1 EXT2 SIDE
Decoder
Setup
If a decoder or a descrambler is connected, see p. 14, you can define one or more programme numbers as decoder programme numbers.
& Select Decoder with the cursor right. é Select Programme.
Decoder
Programme Status
Demo
TV
Setup
Demo
Install
Auto demo
......
Dealer demo - Digital options
- Light sensor
- Comb filter
& Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 3, and when you press the v key on the remote control.
“ Select the programme number under which you
have stored the programme coming from your decoder.
‘ Select Status.
• Select the input used to connect your decoder:
None, EXT1 or EXT2.
• Select
None if you do not want the selected
programme number being activated as a decoder programme number.
Note: Select
EXT2 when the decoder is connected to
your EasyLink video recorder.
The Demo menu allows to demonstrate the TV features separately or in a continuous loop.
If
Auto demo has been selected the demo will
automatically present the features sequentially in a loop. Press one of the cursor keys to stop the Auto demo. If one of the features has been selected, this particular feature demo will run only once, and the Demo menu will reappear.
Note:The Dealer demo is not part of the automatic sequence and can only be activated separately.
8
TV menu
Press the MENU Ï key on the remote control to summon the main menu.
Press the i key on the remote control to get information about the selected menu item.
Picture menu
Picture Sound Features
TV
Smart picture
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Picture format
& Press the cursor right to select Picture. é Select the menu items in the Picture menu with the cursor
up/down.
“ Adjust the settings with the cursor left/right or enter the list of
submenu items with the cursor right. Select a submenu item with the cursor up/down.
Note:To remove the menu background before adjusting the picture settings, see Select TV setup, General, p. 7.
Smart picture
Select
Smart picture to display a list of predefined picture
settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in
the picture menu.
Digital options
Pixel Plus is the most ideal setting, doubles the horizontal resolution and increases the number of lines with 33%.You may consider to select Movie Plus in case a halo effect should disturb you. Dependent on your own preference, select Double lines, or 100 Hz Digital Scan.
Note:When 60 Hz NTSC material is used, the options are changed to Pixel Plus, Movie Plus or Progressive, progressive scan without motion compensation.
Active Control
The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.
& Press the h key on the remote control. é The Active Control menu appears. “ Press the cursor up/down to select the Active Control values
Off, Minimum, Medium (recommended) or Maximum.
The picture settings are being optimised continuously and automatically which is displayed by bars. The menu items can not be selected.
‘ Press the cursor right to select Smart Picture. ( Press the cursor up/down to select one of the predefined
picture settings.
§ Press the cursor right to select Active Display. è Press the cursor up/down to select Show bars, one of the
Dual screen demos or
Off.
When you select Dynamic contrast, Pixel Plus, Digital Noise Reduction or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on.
! Press the h key again to switch off the Active Control menu.
9
Sound menu
Sound
TV
Smart sound
Equalizer
Volume
Balance
Loudness
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(3D effect)
AVL
Delta volume
Features menu
& Press the cursor right to select Sound. é Select the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor left/right.Remember, control settings are at normal mid-range levels when the bar scale is centred.
Smart sound
Select
Smart sound to display a list of predefined sound
settings, each corresponding with specific factory settings of Treble and Bass.
Personal refers to the personal preference settings of sound in
the sound menu.
Notes:
- Some menu items are only available in case of a Cinema Link configuration and when the Cinema Link is activated. Others are steered by the audio receiver instead of by the TV. See the separate Cinema Link booklet supplied.
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo transmission.
- Nicam/Analogue is only selectable in case of Nicam transmission.
TV
Programme list
Subtitle
Sleeptimer
Child lock
On timer
Zoom
Features
Off On On during mute
& Press the cursor right to select Features. é Select the menu items with the cursor up/down and adjust the
settings with the cursor left/right.
Programme list
Press the external.
Select subtitles
The subtitle page must be stored for each TV channel: Switch on teletext and select the proper subtitle page from the index. Switch off teletext.
Subtitle On will automatically display them on
the selected TV channels if subtitles are in the transmission.A symbol will indicate that the mode is on. Select
On during mute when you want to
have the subtitles automatically displayed only when the sound has been muted with the ¬ key on the remote control.
Child lock
& Select Child lock.
Child lock
é Press the cursor right to enter the Child lock
Lock Custom lock Unlock
Lock after
Programme lock
menu.You’re summoned to enter your code.
Note:You have to re-enter your code each time you enter the child lock menu.
OK key to switch over to the selected TV channel or
Important:You have forgotten your code ! See p. 8.
“ Select one of the menu items of the child lock
menu:
•
Lock if you want to lock all channels and
externals.
•
Custom lock and press the cursor right.
Select:
-
Lock after if you want to lock all channels
and externals from a certain time onwards. Press the cursor right and enter the time with the cursor up/down and right. Press the
OK
key to validate.
-
Programme lock if you want to lock a
certain TV channel or external;
• Select
Unlock to disable all locks you have set.
10
On timer
& Select On timer with the cursor down.
VCR1 BBC2
Off
On timer
é Select On with the cursor right. “ Press the cursor right again to enter the
On
CNN TVE
π.....
Sunday Monday
.......
Daily
15:45
programme list.
‘ Select the TV channel or external you want
your TV to switch to on a selected time and day.
( Press the cursor right again to select a day of
the week or to select
Daily.
§ Press the cursor right once again to enter the
time with the digit keys or with the cursor up/down and press the
è Press the MENU Ï key to turn off the menu.
OK key to activate.
Note:To check your timer settings, press the i key.
Zoom
& Select Zoom with the cursor down and press
the
OK key.
é Press the OK key to select one of the zoom
magnifications (x1, x4, x9, x16).
“ Additionally you can shift the selected zoom
window over the screen with the cursor keys up/down, left/right.
‘ Press the MENU Ï key to turn off the zoom
function.
Teletext guide
TV channels which broadcast teletext also transmit a page with the programme guide of the day. If the displayed teletext programme guide page satisfies the Video Programming via Teletext (VPT) requirements, it will be possible to record, remind, watch or lock programmes.
& Press the æ key. é Select a TV channel with the cursor up/down and press OK. “ Move the cursor up to the top of the channel list where the name of the selected TV channel
reappears.
‘ Press the cursor right to move the puck over the selection ball. ( In the teletext index page, look for the programme guide page of the day or the following day.
§ Enter with the digit keys, the programme guide page number.
Press the cursor right twice to move the puck to the right to choose one of the subpages if available.
page ball
selection ball
channel list
Mon 05 Feb 16.35
BBC1
BBC2
ITV
CH4
CH5
Review Record Remind Watch Lock
100 1
BBC CEEFAX
LIONS RECORD ANOTHER WIN 430 Index 100 News 300 BBC Info 110 Headlines 305 Children 120 Weather 400 Cookery 150 Sports 415 Education 200 Radio 500
subpages
scroll ball
If the selected programme satisfies the VPT requirements, the TV will remember the last selected teletext page number of that channel that contains programme guide information and indicates which programme starts at what time. Every time you press the æ key, the teletext programme guide page of the selected TV channel will be available.
Note:The broadcaster is responsible for the content of the information.
11
Basic functions
Press one of the grey, red, green, yellow or blue keys to activate a Teletext Guide function. The keys appear in grey if the function is not available.
Review: this menu provides a list of programmes that are marked as reminders,those that have to be
recorded and those that are locked. This menu can be used to change or remove marked programmes.
Record: to programme the recording of the video recorder (if it has a
NEXTVIEWLink function and is
connected to EXT. 2).
Remind: to automatically switch on the TV if it is in standby or to display a message if the TV is on. Lock: to lock certain programmes to prevent recording or watching.
For the functions Record, Remind or Lock, a small menu pops up in which you can choose the interval: once, daily or weekly, or clear an earlier made record,remind or lock setting.The default interval is set to Once.To confirm the frequency, press the
Watch: to watch the selected and currently broadcast programme.
OK key.
Teletext
Most TV channels broadcast information via teletext.This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time. After each programme change, the memory is refreshed.
Switch Teletext on and off
Press b to switch the teletext on.
102 «03 04 05 06 07 08 09 10 11 12»
BBC CEEFAX 102 Mon 05 Feb 16.35.22
BBC CEEFAX
LIONS RECORD ANOTHER WIN 430 Index 100 News 300
BBC Info 110 Headlines 305 Children 120 Weather 400 Cookery 150 Sports 415 Education 200 Radio 500 Lottery 230 Travel 550 Finance 240 Subtitling 888 Music 280 TV Listings 600
Red Green Yellow Blue
Select a Teletext page
- Enter the desired page number with the digit keys, the cursor keys up/down or with the -P+ key.
- Select the options at the bottom of the screen with the colour keys.
Previously selected teletext page
(Only possible in case there is no list of favourite teletext pages available. See p. 13.)
Press the 0 key.
Select the index teletext page
Press the grey colour key † to display the main index (usually p.100).
Only for T.O.P teletext broadcasts:
Press i. A T.O.P. overview of the teletext subjects available is displayed. Select with the cursor up/down, left/right the desired subject and press the
OK key.
Not all TV channels broadcast T.O.P. teletext.
Select subpages
When a selected teletext page consists of different subpages, a list of available subpages appears on the screen. Press the cursor left or right to select the next or previous subpage.
Enlarge a Teletext page
Press q repeatedly to display the upper teletext part, the lower teletext part and then to return to the normal teletext page size. When the teletext page is enlarged, you can scroll the text, line by line using the cursor up/down.
Active screen selection
When in dual screen picture/teletext, enter the desired page number with the press the
MENU key,then select the left screen
(with the blue ball at the top). You can now select a compressed or full screen view of picture/teletext with the q key.
-P+ key,then
12
Hypertext
With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page.
& Press the OK key to highlight the first word or
a number on the page.
é Use the cursor up/down, left/right to select any
other word or number you want to search for.
“ Press the OK key to confirm.The search starts.
A message appears at the bottom of the screen to indicate the searching, or that the word or page is not found.
‘ Use the cursor up to exit hypertext.
Teletext menu
(only available in full screen teletext mode)
& Press the MENU Ï key to activate the menu. é Press the cursor up/down to select the menu
items.
“ Press the cursor right to activate.
Reveal
Reveals/conceals hidden information on a page, such as solutions to riddles and puzzles. Press the cursor right to activate.
Favourite
This list contains up to eight favourite teletext pages. Only the pages of the current channel can be selected.
& Press the cursor right to enter the list. é Press the cursor right again to add the current
page or to select one of the favourite pages to the list.
“ Press the MENU Ï key to watch the page. ‘ Use the 0 key to browse through the list of
favourite pages.
Search
Selecting a word
On the keyboard on screen you can type in a random word you want to search for in the teletext pages.Whether upper- or lowercase is used has no influence.
102 03 04 05 06 07 08 09 10 11 12
BBC1
WORD NAME FOOTBALL
puck
& Press the cursor right to enter the keyboard. é Press the cursor left/right, up/down to select
Cancel Accept
Space Delete
ABCDEFG 1 2 3
HIJKLMN 4 5 6
OP QRSTU 7 8 9
V W X Y Z 0
Shift Special
Red Green Yellow Blue
TELETEXT
the characters, words or functions.
“ Press the OK key to confirm each character
selected.
‘ Select Cancel to cancel the word; Space to
enter a space; character selected; lowercase or capital characters;
Delete to delete the last
Shift to switch between
Special to
display special characters on the keyboard and press the
( Press the cursor left repeatedly to return to
OK key.
the Teletext menu again.
Searching a word
& Type in the word on screen or select a word
from the history list on the right and press
é Select Accept and press OK again. The message
OK.
Searching appears.
“ To cancel the searching or to search for a new
word, select
‘ When a word is not found, a message appears.
Keyboard and press OK.
When the word is found, it is highlighted in the teletext page.To continue the search, press the ok key.
Cycle subpages (if available)
Makes the subpages cycle automatically. Press the cursor right to activate and to de­activate again.
Timed page
To display a specific page from a selected TV channel at a certain time.
& Press the cursor right and select Ye s or No. é Enter the time and pagenumber with the cursor
keys or the digit keys.
Note:Teletext does not have to remain switched on, but you should watch the TV channel you have selected the specific page from.
“ Press the cursor left to return to the TV menu
again.
Language
If the displayed characters on screen do not correspond with the characters used by the teletext broadcaster, you can change the language group here. Select
Group 1 or 2 with the cursor right.
Press the
MENU Ï key to leave the Teletext
menu.
13
CABLE
1
4
2
EXT.
2
3
CABLE
1
2
1
EXT.
2
4
5
3
1
3
2
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you how to connect them.
EXT. 1 can handle CVBS and RGB, EXT. 2 CVBS and Y/C. It is preferred to connect peripherals with RGB
Note: output to If your recorder is provided with the Easylink function, it should be connected to functionality.
Recorder (VCR-DVD+RW)
Other equipment (satellite receiver, decoder,DVD, games, etc.)
EXT. 1 as RGB provides a better picture quality.
Connect the aerial cables 1, 2 and, to obtain the optimum picture quality, eurocable 3 as shown. If your recorder does not have a euroconnector, the only possible connection is via the aerial cable.You will therefore need to tune in your recorder’s test signal and assign it programme number 0 or store the test signal under a programme number between 90 and 99, see Manual installation, p. 6. See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. See also the recorder handbook. See Decoder, p. 8. You can also connect your decoder directly to
EXT. 1 or 2 with a eurocable.
& Connect the aerial cables 1, 2 and 3 as shown (only if
your peripheral has TV aerial in-/output). Connect your equipment with a eurocable 4 or 5 to one of the euroconnectors quality.
é Look for the test signal of your peripheral in the same way as
you do for a recorder.
“ Make a selection in the Setup, Source menu, p. 8.
EXT. 2 to benefit from the EasyLink
EXT.1 or 2 to obtain a better picture
Side connections Camera or Camcorder
& Connect your camera or camcorder as shown. é Connect to VIDEO 2 and AUDIO L 3 for mono equipment.
For stereo equipment also connect S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-video input 1 and audio inputs 3.
Do not connect cable 1 and 2 at the same time.This may cause picture distortion !
Headphone
& Insert the plug into the headphone socket L as shown.
14
é Press ¬ on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm.The headphone socket has a 3.5 mm jack.
In the Sound menu select headphone volume.
AUDIO R 3.
Headphone volume to adjust the
Stereo amplifier and two extra FRONT speakers
& Connect the audio cables to the audio input of
your amplifier and to
AUDIO L and R at the
back of your TV.
é The output level is controlled by the volume
AUDIO
control of the amplifier.
Note: Switch off the TV and your audio amplifier before connecting them. Set the audio amplifier’s volume to minimum.
To select connected equipment
Press the v key on the remote control repeatedly to select EXT1, EXT2 or SIDE according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Cinema Link surround receiver
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the
Recorder or DV D menu on screen.
Recorder
Ò p ‡ π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
DVD
Ò p ‡ π † Ï
Prev. Play Stop Play Next Eject
& Press the MENU Ï key on the remote
control.
é Select the Recorder or DVD menu with the
cursor up/down.
“ Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
The key ® for recording can be operated in the TV mode. If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.
15
Audio- and video equipment keys
213
546
879
0
B
v
®
Ò
‡π
†
æ b
Ï
i
VCR DVD AMP SAT
¬V PP
0
PIXEL PLUS
OK
MENU
UQÌ
hb
S
q
Most of the audio and video equipment from our range of products can be operated with the remote control of your TV.
Press one of the keys after you pressed the
VCR, DVD, AMP or SAT key
repeatedly according to the equipment you want to operate with this remote control. See Use of the remote control, p. 3.
B to switch to standby S for pause (
DVD , CD,VCR)
® for record Ò for rewind (
search down (
VCR, CD);
DVD , AMP)
‡ for stop π for play † for fast forward (
CD);
search up (
VCR,
DVD/AMP)
æ to select your choice of
subtitle language ( RDS news/TA ( to shuffle play (
b to select a
RDS display ( info on screen (
DVD ); AMP); CD)
DVD title;
AMP);
CD)
i display information
Ï to switch the menu on or
off
- P + for chapter, channel, track
selection 0 to 9 digit entry 0 tape index (
VCR),
select a DVD chapter,
select a frequency (
AMP)
U VCR timer
Q surround on/off (
CD)
AMP,
cursor up/down to select the
next or the previous disc
(
CD)
cursor left/right to select the
previous or following track
(
CD);
to search up/down (
AMP)
Note: When no action is undertaken within 60 seconds, the remote control returns
to TV mode.
Submodes
The
SAT mode can be customised according to the satellite receiver
you want to operate: with
Within TV mode, press the digit key 3 to select the digit key 4 to select the
RC6 or RC5 signalling standard.
OK key together with: SAT RC-5 system SAT RC-6 system.
Record with your recorder with EasyLink
In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen. Continue to press the ® record key on the remote control for more than 2 seconds.
Note: Switching programme numbers on your TV does not disturb recording ! When recording a programme from a peripheral connected to select another TV programme on the screen.
16
EXT. 1, you can not
Tips
Care of the screen Clean the TV with a slightly damp soft cloth.Do not use abrasive solvent as it can
damage the TV screen.
Poor Picture • Have you selected the correct TV system in the manual installation menu ?
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc.?
• Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.
• Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. See Installation, p. 6.
• Are brightness, sharpness and contrast out of adjustment? Select Factory settings in the Setup, General menu, p. 7.
• Sometimes poor picture quality is possible when having activated an S-VHS camera or camcorder connected to the right side of your TV and another peripheral is connected to
EXT 1 or 2 at the same time. In this case switch
off one of the other peripherals.
No picture • Is the aerial connected properly?
• Are the plugs tightly connected in the aerial socket?
• Is the aerial cable in good condition and does it have suitable plugs?
No sound • No sound on any channel? Check the volume isn’t at minimum.
• Is the sound interrupted with the mute key ¬?
No solution found Switch your TV off and then on again once. Never attempt to repair a defective for your picture or TV yourself. Check with your dealer or call a TV technician. sound problem ?
Remote control
• If your TV no longer responds to the remote control, the batteries may be dead
or the wrong mode (TV or other peripheral, see p. 3) is selected.
• You can still use the
MENU key and the -/+ keys at the top of your TV.
Menu Have you selected the wrong menu? Press the MENU Ï key again to exit from
the menu.
Standby Your TV consumes energy in the standby mode. Energy consumption contributes
to air and water pollution. Power consumption: 1 W.
17
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use