![](/html/13/133f/133f0364d20a88b85acdfda6fbeadb159b9ed3b67a89194b4c50ecb0bf7d79bd/bg1.png)
Connecting Hi-fi System or External Speakers to TV
3
How t
o
SPDIF (Sony and Philips Digital Interconnect Format)
is highly recommended for high quality digital
surround sound output.
Connect red/while audio cables from the TV
A
monitor output jacks to the rear of hi-fi system
or external speakers.
AV1 in
Y
Pb
Pr
T VIDEO INPUT
AV2 in
TV Jack Panel
AUDIO
VIDEO
L/Mono
R
Monitor out
COMPONEN
A
TV
IN
Need more help?
User manual:
Check the user ma ual that came with
Online help
:
n
www.p4c.philips.com or
w.usasupport.philips.com
ww
S-VIDEO
Better
your
OR
TV.
Connect audio cable from the SPDIF jack on the
B
rear of the TV to the DIGITAL IN jack on the
rear of the hi-fi system or external speakers.
B
mak
e
Use this guide to achieve the optimal connection for each of
the best
connection
our components
y
.
TV can support these different types of cable connection. Please check your
device to see which one applies.
Connection Basics
Better Good
Component Video
Input (CVI)
Provides superior picture
quality by separating the
green, blue and red
luminance signals. Typically
used with red/white
1
audio cables.
Connecting Set-Top Box to TV
S-Video
Supplies a better picture
than RF and Composite
connections. Used with
red/white audio cables.
Composite Audio/Video
Separate video (yellow) and
audio (red/white) cables that
provide a basic connection from
the cable box and other devices.
Note
: The color of audio inputs
may differ, e.g. red/white or
red/black.
Basic
RF Cable
RF
Provides a basic
connection
Basic
RF
Provides a basic
connection
for antenna or cable.
Provides both audio
and video.
Connect RF cable
A
from wall to input at
the back of the cable
box.
for antenna or cable.
Provides both audio
and video.
Cable Signal IN
C
from Cable Company
A
Back of Cable Box
SPDIF
IN
Y Pb Pr
VIDEO
OUT
S-VIDEO
OPTICAL
SPDIF
TV
PASSCARD
AUDIO IN
R L
AUDIO OUT
-
TO
TV/VCR
CABLE
IN
IR
DVD-D OUT
USB
Use second RF cable to
B
connect the cable box
to the TV input (75 ).
Note: This connection gives
mono sound. For stereo
sound use also composite
audio/video connection
(Refer to panel 2).
Set output switch
C
on set-top box to
CH 3 or 4 and tune
TV to same channel.
Basic
2005 © Koninklijke Philips Electronics N.V.
All
rights reserved.
3139
125 35352
B
75
75 Input
TV
Other Possible
Connections
Monitor out
Component
Video
Refer to panel 2.