All rights reserved. Specifications ar e subject to change without n otice. Tra demarks are the
property of Koninklijke Philips Elec tronics N .V. or their respective ow ners.
TP Vision Netherlands B.V. re serves the right to change pr oducts a t a ny time without being ob liged to a djust
earlier supplies accordingly.
PHILIPS and the PHILIPS’ Shield Emblem are used under lic ense f rom Koninklijke Philips Electronics N.V.
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
• Mains power : AC 100-240V 50/60Hz
• Standby Energy Consumption:≤0.5W
• Ambient temperature : 5°C to 40°C
5
Page 6
2.Connections Overview
6
Page 7
3. Mechanical Instructions
p
)
)
3.1 Cable Dressing
1
2
3
4
5
6
Serial no
1Backlight wireConnect to PJ2
2Power wireConnect to PCN1
3LVDS wireCn401 to T-CON board
4Speaker wireCN203 to speaker(yellow black wire
5Speaker wireCN201 to speaker(red black wire
6two-terminal wireCN104 to IR board and key board
Cable dressing (32” 4052S series)
art descriptionfunction
7
Page 8
3.2 Assembly/Panel Removal
1. Unplug the connector from the SSB.
2. Remove all the fixation screws(5) ,from the IR board control unit. then Remove the fixation screws(6), the IR board control unit.
1. Remove fixation screws [2] [3] and [4]that secure the back cover..
2. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
3. Remove fixation screws[2] [3]and[4] that secure the back cover.unplug connectors
3.2.1Stand removal
1. Remove the fixation screws [1] 4pcs ,that secure the stand
2. Take the stand bracket out from the set.
3.2.2 IR board &key board
Caution: be careful, as these are very fragile connectors!
When defective, replace the whole unit
5
6
6
3.2.3 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
8
Page 9
3.2.4 Power Supply Unit (PSU)
1. Gently unplug all connectors from the PSU.
1. Remove all fixation screws from the PSU.
3. The PSU can be taken out of the set now.
1. Gently release the tapes that secure the speaker cables.
2. Unplug the speaker connector from the SSB.
3. Take the speakers out.
3. Remove the SSB as described earlier.
3.
Remove the keyboard control panel as described earlier.
4. Remove the stand bracket as described earlier.
5. Remove the IR/LED as described earlier.
6. Remove the fixations screws that fix the metal clamps to the front bezel. Take out those clamps.
7. Remove all other metal parts not belonging to the panel.
8. Lift the LCD Panel from the bezel.
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in
damaging the PSU.
3.2.5 Speakers
When defective, replace the both units.
3.2.6 LCD Panel
2. Remove the PSU as described earlier.
When defective, replace the whole unit.
9
Page 10
4.Factory Mode
To perform extended alignments.
yadj
y
py
p
p
p
p
g
g
y
y
g
g
Press the following key sequence on a standard RC transmitter: “1999” directly followed by MENU,
Purpose
PrimarymenuSecondarymenuValue,remark
ADC ADJUST
PICTURE MODE
W/B ADJUST
SSC
Spectial set
QmapadjsutPQ settin
PEQPEQsettin
other
MDOE
R-GAIN
B-GAIN
R-OFFSET
B-OFFSET
AUTO ADCADC automaticall
MODE
PICTURE MODED
BRIGHTNESSBRIGHTNESS
CONTRASTCONTRAST
COLORCOLOR
SHARPNESSSHARPNESS
TINTTINT
CopyallNo function
htAdjust backlight
Overscan_resolutionReselution select
Overscan_hsizeAdjust overscan H size
OverScan
Overscan_hpositionAdjust overscan Hposition
Overscan_vsizeAdjust overscan V size
Overscan_vpositionAdjust overscal Vposition
HDCPKeyusb upgradeHDCPKeyusb upgrade
SW informationSW information
MODEFeature Selection
OSD 0
Non-linear
OSD 25
OSD 50
OSD 75
OSD 100
Channel table1KTC factoryFrequecytable set
Channel table2KTC factoryFrequecytable set
Channel dvbtKTC factory Frequecy table set
Curve adjustment
11
Page 12
5. Software Upgrading and Panel Code
5.1Software Upgrading
1). Changed the file name to "MERGE.bin", then stored software in the FAT32 format blank U disk.
2). Insert USB flash disk into the USB upgrade port, upgrade the software according to the following the operating instructions:
Select AIR or DTV signal source, press Menu key to pop up the main menu, then choose.
Operations and procedure of software upgrading:
Select CHANNEL, press right key or OK key to enter.
12
Page 13
Select Software Update(USB), press right key or OK key to enter.
5.1.4 Notice:
①. When the machine Upgrading (U disk light flash), do not remove U disk or switch off the power, otherwise it will
②. The machine must be power off when inserted or pulled out U disk, to avoid U disk or damage the machine.
5.2Panel Code
Software update menu will pop up when press confirm key, then select “Yes” to confirm:
The process of software updating:
Method 2:Keep pressing VOL+ and CH+ keys on the machine panel, power on the machine, the standby light flashes quickly after
about 5 seconds, standby light extinguish and turn into lighting after about a minute, means that the upgrade is completed.
destroy the software and lead can not upgrade.
Press the following key sequence on a standard RC transmitter: “1999” directly followed by MENU, can see the panel type
information from factory menu, see the Panel PN from the configuration table
The 4052S is covered by MSD3463 platform. The major deltas versus its predecessor support DVB-T, with also multi-media, Video out
The 4052Schassis comes with the following stylings:
6.1.1 Implementation
Key components of this chassis are:
6.1.2 Block diagram
14
Page 15
6.2 Power Supply
(
)
Power architecture of this platform.
Speaker-R
CN201
6.2.1 Power Supply Unit
All power supplies are a black box for Service. When defective, a new board must be ordered and the defective one must be returned,
unless the main fuse of the board is broken. Always replace a defective fuse with one with the correct specifications! This part is available
in the regular market.
Consult the Philips Service web portal for the order codes of the boards.
Important delta’s with the platform are:
• New power architecture for LED backlight
• “Boost”-signal is now a PWM-signal + continuous variable
The control signals are:
• PS-ON
• Lamp “on/off”
• DIM (PWM) (not for PSDL)
In this manual, no detailed information is available because of design protection issues.
• +12 output (on-mode)
• +12V_audio (audio AMP power)
• Output to the display; in case of
- IPB: High voltage to the LCD panel
- PSL and PSLS (LED-driver outputs)
- PSDL (high frequent) AC-current.
6.2.2 Diversity
The diversity in power supply units is mainly determined by the diversity in displays.
The following displays can be distinguished:
• CCFL/EEFL backlight: power panel is conventional IPB
• LED backlight:
- side-view LED without scanning: PSL power panel
- side-view LED with scanning: PSLS power panel
- direct-view LED without 2D-dimming: PSL power panel
- direct-view LED with 2D-dimming: PSDL power panel.
PSL stands for Power Supply with integrated LED-drivers.
PSLS stands for a Power Supply with integrated LED-drivers with added Scanning functionality (added microcontroller).
PSDL stands for a Power Supply for Direct-view LED backlight with 2D-dimming.
15
Page 16
6.3 DC/DC Converters
The on-board DC/DC converters deliver the following voltages(depending on set execution):
• +5V-SB, permanent voltage for the Stand-by Power system
• +3V3-STANDBY,voltage for IR/Key board
• +12V, input from the power supply for the panel common(active mode)
• +3V3-EMMC, +V-EMMC-IO, voltage for EMMC when TV on
• +1V5-DDR, +VREF-A2-DQ,, +VREF-A2-CA, voltage for DDR
• TUNER_3V3, supply voltage for tuner
• +5V-SW, input intermediate supply voltage for USB Power
• +12V-AUDIO1 for the AUDIO AMP
• +3.3VA_T2, +1.2V_T2 voltage for Demodulator IC channel decoder
6.3.1 Power Tree
16
Page 17
6.3.2 Power layout SSB
,
L201,L204
12V for U202
PF1
3.15A/250V
U105 SY8009B
DC TODC 5V TO
1.15V,for CPU1
68UF/450V
U114
3.3V
PEC5
U201
MS3463GSA-Z
U1001
3.3V for
tuner
Q12 ME2325
12V for PANEL
U8 AS1117-AS
DC TO DC,5V TO
1.5VFor MSD3463
PU2
OB3350 12V
PD6-8
SR5100 12V
PU3 MP9495
DC TO DC,12V
TO5V
U503 SGM2554
DC TO DC, 5V TO
5V
for HDMI
Power SSB Top View
6.4 Front-End Analogue and DVB-T; reception
6.4.1 DVB-T part
The Front-End for analogue tuner consist of the following key components:
• TUNER POWER SUPPLY IC AMS1117-3.3V
• CPU MSD3463 Processor
• TUNER SI2151 Processor
Below find a block diagram of the front-end application for CN1 part.
17
Page 18
SI2151
6.5 HDMI
Refer to below for the application.
MSD3463
The following HDMI connector can be used:
• HDMI 1: HDMI input ( TV digital interface support
HDMI1.4a) with digital audio/PC DVI input/MHL/CEC
• HDMI 2: HDMI input ( TV digital interface support HDCP)
with digital audio/PC DVI input/CEC
• HDMI 3: HDMI input ( TV digital interface support
HDMI1.4a) with digital audio/PC DVI input/CEC/ARC
• +5V detection mechanism
• Stable clock detection mechanism
• HPD control
• Sync detection
• TMDS output control
• CEC control
• ARC control
• MHL control
18
Page 19
6.6 Video and Audio Processing - MSD3463
The MSD3463 is the main audio and video processor (or System-on-Chip) for this platform. It has the following features:
1. Worldwide multi-standard analog TV demodulator
2.PAL/SECAM/DVB-T/DVB-T2 /DVB-C demodulators
3.1920*1080@60Hz direct drive
4. Powerful CPU core
5. A transport de-multiplexer
7. A muti-standard video decoder
8. Rich format audio codec
10. HDMI1.4 receiver
11. MHL input
12. 2D converter
14. PWM dimming (LED backlight)
15. Two-link LVDS,
1 OVERVIEW
The MediaTek MSD3463family consists of a DTV front-end demodulator, a backend decoder and a TV controller and offers high
integration for advanced applications. It integrates a transport de-multiplexer, a high definition video decoder, an audio decoder, a -link
LVDS transmitter, and a NTSC/PAL/SECAM TV decoder .The MSD3463 enables consumer electronics manufacturers to build high
quality,
low cost and feature-rich DTV.
World-Leading Audio/Video Technology: The MSD3463 supports Full MPEG2/4/H.264 video decoder standards, and JPEG. The
MSD3463 also supports MediaTek MDDiTM de-interlace solution which can reach very smooth picture quality for motions.
The special color processing technology provides a natural, deep colors and true studio quality video. Moreover, theMSD3463 family has
built-in high resolution and high-quality audio codec.
Rich Features for High Value Products: The MSD3463 family enables true single-chip experience. It integrates high-quality HDMI1.4,
high speed VGA ADC, a-link LVDS, USB2.0 receiver , and ATSC/DVB-T/DVBC/DTMB/ISDB-T demodulators.
All New FHD@60Hz Experience: The MSD346 family provides consumers with FHD 60Hz direct drive.
WW Common Platform Capability: The MSD3463 family supports ATSC, DVB-T, DVB-C, and ISDB-T demodulation functions. It
reserves transport stream inputs for external demodulators for other countries or areas. TV maker can easily port the same UI to worldwide
TV models. First-class adjacent and co-channel rejection capability grants excellent reception.Professional error-concealment provides
stable, smooth and mosaic-free video quality.
19
Page 20
7. IC Data Sheets
MSD3463
20
Page 21
5
8. Circuit Diagrams
4
3
21
MSD3463-T4C1(
PAGE
DD
CC
BB
1Index&History Rev
2
3
4
5
6
7
8
History Rev
Block Diagram
Power & LED Driver
System Power
MSD3463
Video&VGA&USB&Amplify &LVDSpage
HDMI page
Tuner page
Rev
Ver:A1.07/2/2015
Content
DescriptionDATE
Author
ZHQINGFirst Version Release
A
本文档仅限中国深圳市康冠技术有限公司和被呈送方内部使用,未经书面许可请勿扩散到第三方。
This document for ShenZhen KTC Technology CO., Ltd and presented party internal use only,
Do not spread to third party without the written permission.
5
4
3
版权所有@深圳市康冠技术有限公司
Copyright@ ShenZhen KTC Technology Co., LTD
21
Page 22
5
4
3
21
unipath output 900mA
DD
Rectification
RE/CE Filter circuit
CC
AC INPUT
DC/DC convert
PWM control
BOOST switching circuit
12V
Output filtering circuit
12V OUTPUT
RESET
12V
12V to 5V
DC-DC
5V_STANDBY
PWR_ON/OFF
Triode control
GPIO
1.15V
DC-DC
TUNER_3.3V
TUNER PWR
AS1117
DDR PWR
DC-DC
3.3V_STANDBY
AS1117
64Mbit
SPI FLASH
HDMI2
(ARC)
HDMI1
(MHL)
VDDC PWR
DDR PWR 1.5V
3.3V_Standby
HDMI2
HDMI1
12V_NORMAL
BL-ADJUST
Panel Voltage
MOS tube control
MSD3463
Y/Pb/Pr
Y/Pb/Pr
12V_NORMAL
40P LVDS
Audio AMP
TPA3020D2
IF
SILICON TUNER
SI2151
TUNER_3.3V
IR&KEY
VGA
AV-IN
AV-INUSB
VGA
USB
AUDIO-OUT
AUDIO-OUT
IR&KEY
TUNER CONN
SPK-L
SPK-R
RF
BB
A
This document for ShenZhen KTC Technology CO., Ltd and presented party internal use only,
Do not spread to third party without the written permission.
5
4
3
Copyright@ ShenZhen KTC Technology Co., LTD
22
Page 23
5
4
3
21
SR5100
SR5100
PD6
PR5
PR5
33K
33K
10uF/16V
10uF/16V
4
BP
PD1S
PC29
PC29
10uF/16V
10uF/16V
BP
DC/DC
+12V
PC17
PC17
靠近
PD6
PD7
PD7
SR5100
SR5100
SR5100
SR5100
PD8
PD8
PR6 47ΩPR6 47Ω
PR7 47ΩPR7 47Ω
FB
2
FB
CP
3
PR26 390KPR26 390K
PC3
PC3
100PF/50V
100PF/50V
12V TO 5V Power
PR57 100KPR57 100K
PC19
PC19
PC18
PC18
0.1uF
0.1uF
0.1uF
0.1uF
DC-DC
PC4
PC4
1nF/200V
1nF/200V
PC2
PC2
10NF/50V
10NF/50V
PC20
PC20
0.1uF
0.1uF
PR25 3.3KPR25 3.3K
PC1
PC1
0.47UF/16V
0.47UF/16V
DCDC_EN
PR58
PR58
90.9K
90.9K
PR59
PR59
10K
10K
AGND
PR8NCPR8
PEC1
PEC1
47uF/50V
47uF/50V
NC
PEC2
PEC2
1000uF/16V
1000uF/16V
1
PD3
PD3
D4KB8 4A800V
整流桥
D4KB8 4A800V
!!
!!
471/400Vac
471/400Vac
!!
331
PCN1PCN1
2
PCY1
PCY1
PL1
PL1
20mH
20mH
PRXD
PRXD
1MΩ
1MΩ
PRXB
PRXB
1MΩ
1MΩ
PCY3
PCY3
221/400Vac
221/400Vac
整流桥
AGND
AGND
0.33UF/250V
0.33UF/250V
1
-+
-+
4
PGND
PCY2
PCY2
471/400Vac
471/400Vac
21
34
PCX1
PCX1
!!
!!
PF1
PF1
T2AH/250Vac
T2AH/250Vac
T2AL/250Vac
!!
DD
CC
5V
TO MASTER CHIP
PWR_ON/OFF5
BB
+
+
PEC5
PEC5
68uF/450V
68uF/450V
3
PGND
PCY4
PCY4
!!
!!
471/400Vac
471/400Vac
AGND
PD4 NCPD4 NC
PRXC
PRXC
1MΩ
1MΩ
PRXA
PRXA
1MΩ
1MΩ
+5V_Standby
PC9NCPC9
NC
t
t
PNTC1
PNTC1
2.5Ω/6A
2.5Ω/6A
!!
+5V_Standby+5V_Normal
PR228
PR228
10K
10K
PR45
PR45
4.7K
4.7K
PR198
PR198
4.7K
4.7K
PQ103
PQ103
MMBT3904
MMBT3904
+12V+12V_NORMAL
PR3
PR3
51K
51K
PR2
PR2
51K
51K
PR14
PR14
PR28
PR28
560R
560R
560R
560R
PD2
PD2
ES1J 1A600V
ES1J 1A600V
PR12NCPR12
PD5 NCPD5 NC
NC
PR10NCPR10
1
NC
1
3 2
PR9
PR9
1K/NC
1K/NC
PQ112
PQ112
ME2325
ME2325
1
SOT23
PC165
PC165
0.22uf
0.22uf
PR227
PR227
100K
100K
PR16
PR16
560R
560R
PQ1NCPQ1
NC
32
470uF/16V
470uF/16V
!!
PT1A
PT1A
4
10
PC27
PC27
470PF/1KV
470PF/1KV
6 8
EQ2514
EQ2514
PR17
PR17
560R
560R
6
PU1
PU1
D
LNK6777
LNK6777
BP
PR4
PR4
10R
10R
PQ4NCPQ4
NC
3 2
CA9
CA9
7
PC7
PC7
22PF/1KV
22PF/1KV
+
+
C144
C144
C140
C140
10uF
10uF
0.1uF
0.1uF
+12V
+
+
+
+
+
+
PEC3
PEC3
PEC4
PEC4
1000uF/16V
1000uF/16V
1000uF/16V
1000uF/16V
PR13 22RPR13 22R
PC8 1nF/200VPC8 1nF/200V
PD1 ES1JPD1 ES1J
PR32 0RPR32 0R
+
+
PR24
PR24
56K
56K
FB
PR18
PR18
10K
10K
PGND
PGND
PU3
PU3
IN
EN/SYNC
VCC
AAM
GND
4
MP9495DJ
MP9495DJ
PR60 10RPR60 10R
5
BST
3
SW
8
FB
2
6
7
1
Vout=0.8V*(1+R1/R2)
PC21
PC21
DCDC_FB
S1
1
4
3
0.1uF
0.1uF
PC5
PC5
1UF/25V
1UF/25V
PR10RPR1
0R
2
3
散热片S1散热片
反馈电阻靠近
PT1B
PT1B
EQ2514
EQ2514
PC6
PC6
100nF/25V
100nF/25V
5V MAX 3A
PL6
PL6
4.7uH/3A
4.7uH/3A
12
PR61 36.5K 1%PR61 36.5K 1%
R1
PR62
PR62
6.8K 1%
6.8K 1%
R2
靠近
DCDC,
敏感线,远离干扰源
+5V_Standby
PCA6
PCA6
+
+
470uF/16V
470uF/16V
DC-DC
+12V
PR15 10KPR15 10K
BL-ADJUST4
PD16 1N4148PD16 1N4148
BL-ON/OFF4
PJ2
PJ2
LED+
1
LED+
2
LED+
3
LED+
4
5
6
LED-
7
LED-
8
LED-
9
10
10Pin_2.0mm
10Pin_2.0mm
LED-
M7
LED-
PWM#
PC13
PC13
PR29
PR29
OVP
51K
51K
100PF/50V
100PF/50V
AGNDAGND
PR191KPR19
1K
PC11NCPC11
NC
PR20
PR20
PR22
PR22
PD17M7PD17
PR27
PR27
PR21
PR21
1R2
1R2
1R5
1R5
1R5
1R5
1R2
1R2
PR23
PR23
20K
20K
PC10
PC10
47nF/16V
47nF/16V
8
7
5
6
PU2
PU2
PWM
OVP
FB
COMP
OB3350CP
OB3350CP
PC12
PC12
1nF/50V
1nF/50V
1
VIN
GND3CS
GATE
4
PC14
PC14
100PF/50V
100PF/50V
1UF/25V
1UF/25V
AGND
2
PR30 470RPR30 470R
PC22
PC22
PR40 47RPR40 47R
PR52 470RPR52 470R
12
PR31
PR31
0R33
0R33
PL4
PL4
47uH/15x15mm
47uH/15x15mm
1
PR33
PR33
0R33
0R33
3 2
PR53 10KPR53 10K
PQ2
PQ2
2907
2907
PR39
PR39
10R
10R
PR38
PR38
0R33
0R33
1 2
PQ3
PQ3
AOD4286
AOD4286
PL5
PL5
8UH
8UH
PC28
PC28
1NF/200V
1NF/200V
100PF/50V
100PF/50V
OVP
PC15
PC15
PD10
PD10
SR560L
SR560L
PR11
PR11
47R
47R
VO=21V~~30.4V
IO=900MA
+
+
PEC6
PEC6
220uF/50V
220uF/50V
PR55
PR55
36K
36K
PR562KPR56
2K
PC16
PC16
0.1UF/50V
0.1UF/50V
LED+
AGND
C89
C89
C88
C88
10uF
10uF
10uF
10uF
A
This document for ShenZhen KTC Technology CO., Ltd and presented party internal use only,
Do not spread to third party without the written permission.
This document for ShenZhen KTC Technology CO., Ltd and presented party internal use only,
Do not spread to third party without the written permission.
Copyright@ ShenZhen KTC Technology Co., LTD
2
27
Page 28
5
L1
L2
R2 0RR2 0R
R3 0RR3 0R
270nHL2270nH
L5
270nHL5270nH
L6
270nHL6270nH
TUNER_CONNECTOR
TUNER_CONNECTOR
CON1
CON1
DD
1
2
3
4
TUNER
屏蔽罩
RF
L3
270nHL3270nH
C6 47pFC647pF
3
D1
BAV99D1BAV99
1
L4
2
180nHL4180nHY1
C13
C13
180pF
180pF
C5 39pFC539pF
R1 0RR1 0RC70.1uFC70.1uF
C8 39pFC839pF
SCL-T
SDA-T
Si2151
CC
270nHL1270nH
C72 8pF/ncC72 8pF/nc
C73
C73
C19
C19
33pF
33pF
8pF/nc
8pF/nc
3
12
24MHZ/8pFY124MHZ/8pF
C20
C20
33pF
33pF
4
C1
1nFC11nF
I2CAddr:0xC0
3
+3.3V_TU
9
15
17
U2
18
NC
19
RF_REF
20
RF_IP
22
RF_IN
13
XTAL_I
14
XTAL_O
24
GPIO1
1
GPIO2
3
SCL
2
SDA
23
ADDR
6
GND
3.3V
GND8GND
3.3V
3.3V
Si2151U2Si2151
GND21GND_EPAD
16
C2
C3
1nFC21nF
1uFC31uF
7
1.8V
11
IF_P
10
IF_N
5
AGC1
4
AGC2
12
XOUT
25
C1030
C1030
10uF/6.3V
10uF/6.3V
IF-
C40.1uFC40.1uF
IF+
IF_AGC_T
+3.3V_TU
C1031
C1031
10uF/6.3V
10uF/6.3V
IF-IN+
IF-IN-
J3
J3
1
2
3
4
22*16MM
22*16MM
屏蔽罩
屏蔽罩
DVB-C/T/T2 DIF
IF-IN-DIF-
AGC RC Filter &I2C
2
L80RL80R
C39
C39
NC/33pF
NC/33pF
L90RL90R
C41
C41
NC/33pF
NC/33pF
TUNER_SDA5
TUNER_SCL5
IFAGC_T5
R13 100RR13 100R
Close Tuner
C58
C58
0.1uF
0.1uF
DIF+IF-IN+
SDA-T
SCL-T
IF_AGC_T
DIF-5
DIF+5
1
BB
A
This document for ShenZhen KTC Technology CO., Ltd and presented party internal use only,
Do not spread to third party without the written permission.
Copyright@ ShenZhen KTC Technology Co., LTD
5
4
28
3
2
A
Page 29
9. Styling Sheet
32" 4052S series
29
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.