Philips 32PHD5813, 43PFD5813 User Manual

Register your product and get support at

www.philips.com/TVsupport

5813 series

User Manual

32PHD5813

43PFD5813

Contents

1 Get Support 3

1.1 Identify and Register your TV 3

1.2 TV Help and User Manual 3

1.3 On-line Help and User Manual 3

1.4 Consumer Care / Repair 3

2 Software 4

2.1 Update Software 4

2.2 Software Version 4

3 Quick Guide 5

3.1 Remote Control 5

3.2 IR sensor 6

3.3 Joysticker - Local Control 6

4 Setting Up 7

4.1 Read Safety 7

4.2 TV Placement 7

4.3 Turn on TV 7

5 Connections 9

5.1 Connectivity guide 9

5.2 Antenna 9

5.3 Video Device 9

5.4 Audio Device 10

5.5 Mobile Device 10

5.6 Other Device 12

6 Switch Source 14

6.1 Source List 14

6.2 Rename Device 14

7 Channels 15

7.1 About Channels and Switch Channels 15

7.2 Install Channel 15

7.3 Channel List 17

7.4 Favorite Channels 18

7.5 Closed Caption (CC) and Language 18

8 TV guide 20

8.1 What You Need 20

8.2 Using the TV Guide 20

9 Recording and Pause TV 22

9.1 Recording 22

9.2 Pause TV 22

10 Videos, Photos and Music 24

10.1 From a USB Connection 24

10.2 Photos 24

10.3 Videos 24

10.4 Music 25

11 Open TV Setting Menus 26

11.1 Home Menu Overview 26

11.2 Frequent settings and All settings 26

11.3 All Settings 26

12 Network 33

12.1 Home Network 33

12.2 Connect to Network 33

12.3 Network settings 34

12.4 Interactive TV settings 35

13 Smart TV 36

13.1 Setup Smart TV 36

13.2 Smart TV Start Page 36

13.3 App Gallery 36

14 Netflix 37
15 Environmental 38

15.1 Energy Label 38

15.2 End of Use 38

16 Specifications 39

16.1 Power 39

16.2 Reception 39

16.3 Display Resolution 39

16.4 Supported Input Resolution - Video 39

16.5 Supported Input Resolution - Computer 39

16.6 Sound 39

16.7 Multimedia 39

16.8 Connectivity 40

17 Troubleshooting 41

17.1 Tips 41

17.2 Switch On 41

17.3 Remote Control 41

17.4 Channels 41

17.5 Picture 42

17.6 Sound 43

17.7 HDMI 43

17.8 USB 43

17.9 Wi-Fi and Internet 43

17.10 Wrong Menu Language 43

18 Safety and Care 45

18.1 Safety 45

18.2 Screen Care 46

19 Terms of Use 47
20 Copyrights 48

20.1 MHL 48

20.2 HDMI 48

20.3 Dolby Audio 48

20.4 DTS HD 48

20.5 Wi-Fi Alliance 48

20.6 Other Trademarks 48

21 Open Source 49

21.1 Open Source Software 49

21.2 Open Source License 49

22 Disclaimer regarding services and/or
software offered by third parties 53

Index 54

2

1

1.3

Get Support

1.1

Identify and Register your TV

Identify your TV - TV model number and serial
number

You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.

Register your TV

Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.

Go to www.philips.com/TVsupport

On-line Help and User
Manual

To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.

Go to www.philips.com/TVsupport.
On the support site you can find your country's

telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our collaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.

For more TV troubleshooting and frequently asked
questions (FAQs)...

Go
to http://philips-tvconsumercare.kxondemand.com/

portal/en/ModelSelect

1.2

TV Help and User Manual

 Settings > Help
You can use the Help function to diagnose and get

more information about your TV.

• How to - You can see instructions on how to

install channels, sort channels, update TV software,
connect external devices and use Smart functions on
your TV.

• Check the TV - You can check if the picture and
sound are working fine while playing a short video
clip.

• Check the Network - Check the Network
Connection.

• Update software - Check available software
updates.

• User manual - Read the user manual for TV
information.

• Troubleshooting - Find a solution for frequently
asked questions.

• Factory settings - Reset all settings to factory
settings.

• Reinstall TV - Reinstall and redo the complete TV
installation.

• Contact info - Shows the telephone number or web
address for your country or region.

TV Help on your tablet, smartphone or computer

To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer.
To download the Help (user manual) go
to www.philips.com/TVsupport

1.4

Consumer Care / Repair

For support and repair, call the Consumer Care
hotline in your country. Our service engineers will take
care of a repair, if necessary.

Find the telephone number in the printed
documentation that came with the TV.
Or consult our
website www.philips.com/TVsupport and select
your country if needed.

TV model number and serial number

You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.

 Warning

Do not attempt to repair the TV yourself. This may
cause severe injury, irreparable damage to your TV or
void your warranty.

3

2

Software

2.1

Update Software

Search for Updates

Update from Internet

 (Home) > Settings > Update software > Search
for updates > Internet

Look for a software update yourself.

back on again. Please wait.

Do not . . .

• use the remote control

• remove the USB memory device from the TV

• press  twice

• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.

The TV software has been updated. You can use the
TV again.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB memory
device.

• If the TV is connected to the Internet, you may
receive a message to update the TV software. You
need a high-speed (broadband) Internet
connection. If you receive this message, we
recommend you to carry out the update.

• During the software update, there is no picture and
the TV will switch off and on again. This might happen
several times. The update can take a few minutes.

• Wait until the TV picture comes back up. Do not
press the power switch  on the TV or on the
remote control during the software update.

Update from USB

 (Home) > Settings > Update
software > Search for updates > USB

• You need a computer with a high-speed Internet
connection and a USB memory device to upload the
software on the TV.

• Use a USB memory device with 512MB free space.
Make sure that write protection is switched off.

1 - Start the update on TV

Select Update software > Search for updates >
USB, then press OK.
2 - Identify the TV

Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.

3 - Download the TV software

- Insert the USB memory into your computer.

- On the USB memory device, locate the
file update.html and double click it.

- Click on Send ID.

- If new software is available, download the .zip file.

- After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.

- Do not place this file in a folder.

4 - Update the TV software

Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then

Local Updates

 (Home) > Settings > Update
software > Search for updates > USB > Local
updates.

For dealers and expert users.

2.2

Software Version

 (Home) > Settings > Update
software > Current software Info

To view the current TV software version.

4

3

Quick Guide

3.1

Remote Control

Batteries and Cleaning

Replace batteries

If the TV does not react on a key press on the remote
control, the batteries might be empty.

To replace the batteries, open the battery
compartment on the back of the remote control.

1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2 Alkaline,
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.

• Remove the batteries if you are not using the remote
control for a long time.

• Safely dispose of your old batteries according to the
end of use directions.

Cleaning

• Fast forward , to go fast forward

• Record , to start recording
3 -  Media browser

To open or close the Media browser menu.
4 -  TV GUIDE

To open or close the TV Guide.
5 -  Search

To open the Smart TV searches page.
6 -  Settings

To open the Quick settings menu.
7 - SOURCES

To open the Sources menu.
8 -  LIST

To open or close the channel list.

Middle

Your remote control is treated with a scratch-resistant
coating.

To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.

Key Overview

Top

1 -  Standby / On

To switch the TV on or back to Standby.
2 - Playback and Record

• Play , to playback.

• Pause , to pause playback

• Stop , to stop playback

• Rewind , to rewind

1 -  Home
To open the Home menu.

2 -  SMART TV
To open the Smart TV start page.

3 -     Color keys
Direct selection of options. Blue key , opens Help.

4 -  INFO
To open or close programme info.

5 -  BACK
To close a menu without changing a setting.

6 -  EXIT
To switch back to watch TV.

7 -  OPTIONS
To open or close the Options Menu.

8 - OK key
To confirm a selection or setting. To open the channel
list while watching TV.

9 - Arrow / navigation keys
To navigate up, down, left or right.

10 -  FORMAT
To open or close the Picture Format menu.

5

Bottom

1 - 

To open the Netflix App directly. With the TV switched
on or from standby.

2 -  Volume
To adjust the volume level.

3 - Number keys
To select a channel directly.

4 - CC (Closed captions)
To switch Closed captions on, off or to show
automatically.

5 -  Channel
To switch to the next or previous channel in the
channel list. To start the next or previous chapter on a
disc.

3.3

Joysticker - Local Control

Keys on TV
If you lost the remote control or its batteries are

empty, you can still do some basic TV operations.
To open the basic menu…

1 - With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2 - Press left or right to
select  Volume,  Channel, or  Sources.
Select  Demo to start a demo movie.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection.

The menu will disappear automatically.

6 -  Mute
To mute the sound or to restore it.

7 - (Dot)
To enter digital sub-channels.

3.2

IR sensor

The TV can receive commands from a remote control
that uses infrared (IR) to send commands. If you use
this kind of remote control, always point it at the
infrared sensor on the front of the TV.

 Warning

Do not put any objects in front of IR sensor of the TV
as it may block the IR signal.

6

4

Setting Up

4.1

Read Safety

Read the safety instructions first before you use the
TV.

To read the instructions, in Help > User manual,
press the color key  Keywords and look
up Safety and Care.

4.2

TV Placement

Tips on Placement

• Position the TV where light does not shine directly
on the screen.

• Position the TV up to 6 inches away from the wall.

• The ideal distance to watch TV is 3 times its diagonal
screen size. When seated, your eyes should be level
with the center of the screen.

• 32PHx5813

VESA MIS-F 100, M6 (Minimum 12 mm,
Maximum 16 mm)

• 43PFx5813

VESA MIS-F 200x200, M6 (Minimum 12 mm,
Maximum 16 mm)

Caution

Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TVs weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.

4.3

Turn on TV

Connect Power Cable

TV Stand

You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it
from www.philips.com/TVsupport.

Use the model number of the TV to look for
the Quick Start Guide to download.

Wall Mounting

Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .

• Insert the power cable into the POWER connector
on the back of the TV.

• Make sure the power cable is securely inserted in
the connector.

• Make sure that the power plug, in the wall socket, is
accessible at all times.

• When you unplug the power cable, always pull the
plug, never pull the cable.

Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.

7

On or Standby

Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.

Switch On

• Press the small joystick key on the back of the TV.

Switch to standby

To switch the TV to standby, press  on the remote
control. You can also press the small joystick key on
the back of the TV.

In standby mode, the TV is still connected to the
mains power but consumes very little energy.

To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.

8

5

Connections

5.1

Connectivity guide

Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.

When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.

5.2

Antenna

Insert the antenna plug firmly into
the Antenna socket at the back of the TV.

You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.

Copy protection

HDMI ports support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu­ray Disc. Also referred to as DRM (Digital Rights
Management).

Component

Y Pb Pr - Component Video is a high quality

connection.
The YPbPr connection can be used for High Definition

(HD) TV signals. Next to the Y, Pb and Pr signals, add
the Audio Left and Right signals for sound.

5.3

Video Device

HDMI

An HDMI connection has the best picture and sound
quality.

Match the YPbPr (green, blue, red) connector colors
with the cable plugs when you connect.
Use an Audio L/R cinch cable if your device also has
sound.

For best signal quality transfer, use a High speed
HDMI cable and do not use an HDMI cable longer
than 5 m.

9

Composite

Digital Audio Out - Optical

CVBS - Composite Video is a standard time quality

connection. Next to the CVBS signal adds the Audio
Left and Right signals for sound.

• Y shares the same jack with CVBS.

• Component and Composite share audio jacks.

5.4

Audio Out - Optical is a high quality sound
connection.

This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theater System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.

Audio Device

HDMI ARC

Only HDMI 2 on the TV has HDMI ARC (Audio
Return Channel).

If the device, typically a Home Theater System (HTS),
also has the HDMI ARC connection, connect it
to HDMI 2 connection on this TV. With the HDMI
ARC connection, you do not need to connect the
extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.

Headphones

You can connect a set of headphones to
the  connection on the side of the TV. The
connection is a mini-jack 3.5mm.

5.5

Mobile Device

Wi-Fi Direct / Miracast

About Wi-Fi Miracast

You can view your photos or play your music and
videos from a mobile device on your TV with Wi-Fi
Miracast™. The mobile device and the TV should be
within range, which usually means being in the same
room.

Check if your mobile device is ready for Miracast.

10

Your TV is a Wi-Fi CERTIFIED Miracast™ device.
With Miracast™, you can watch and share the screen
of your smartphone, tablet or computer on your TV
screen wirelessly. You can stream videos (audio and
video), and share photos or anything else that's on
the device screen. No need to connect the device to
your home network. Both the TV and the device must
be Wi-Fi CERTIFIED Miracast™ devices and have
Miracast switched on.

Miracast on this TV is subject to the HDCP protocol
and cannot display copy-protected premium content
sent by a device. The maximum video resolution
supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz
Wi-Fi.

For more information on Wi-Fi CERTIFIED Miracast™
go to www.wi-fi.org

Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi
CERTIFIED Miracast™, Miracast™ are trademarks of
the Wi-Fi Alliance.

Using Miracast
Switch on Miracast

Press  SOURCES > Miracast
Share a Screen on TV

1 - Activate Miracast (Screen mirroring) on your
mobile device.
2 - On your mobile device, select the TV. (This TV will
be displayed as TV model name)
3 - Select the TV name on your mobile device, after
connection, you can enjoy using Miracast.

Stop Sharing

You can stop sharing a screen from the TV or the
mobile device.

Reset Wi-Fi Miracast connection

All previously connected devices are stored in the Wi­Fi Miracast list of connections.

To clear all connected Miracast devices…

 (Home) > Settings > All
settings > Network > Reset Wi-Fi Miracast
connection.

Screen Delay

The normal delay when sharing a screen with
Miracast is about 1 second. The delay might be longer
if you are using older devices with less processing
power.

MHL

This TV is MHL™ compliant.
If your mobile device is also MHL compliant, you can

connect your mobile device with a MHL cable to the
TV. With the MHL cable connected you can share
what's on your mobile device on the TV screen. Your
mobile device charges its battery at the same time.
The MHL connection is ideal for watching movies or
playing games from your mobile device on TV for a
longer time.

Charging

With the MHL cable connected, your device will
charge while the TV is switched on (not in standby).

MHL Cable

You need a passive MHL cable (HDMI to Micro USB)
to connect your mobile device to the TV. You might
need an extra adapter to connect to your mobile
device. To connect the MHL cable to the TV use
the HDMI 1 MHL connection.

From the device

With the application you use to start Miracast, you
can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected programme.

From the TV

To stop watching the screen of the device on TV, you
can . . .

• press  EXIT to watch a TV broadcast

• press  (Home) to start another activity on TV

• press  SOURCES to open the Sources menu
and select a connected device.

MHL, Mobile High-Definition Link and the MHL Logo
are trademarks or registered trademarks of the MHL,
LLC.

11

Apps - Philips TV Remote App

With the TV Remote App, you master your media
around you. Send photos, music or videos to your big
TV screen or watch any of your TV channels live on
your tablet or phone. Look up what you want to
watch on the TV Guide and watch it on your phone or
TV. With the TV Remote App you can use your phone
as a remote control*.

Download the Philips TV Remote App from your
favorite app store today.

The Philips TV Remote App is available for iOS and
Android and is free of charge.

* When use your phone as a remote control, TV
cannot be switched on or off via your phone.

Hard Drive with a minimum of 4GB of disk space.

To Record

To pause and record a broadcast, you need a
minimum of 250GB disk space. If you want to record
a broadcast with TV guide data from the Internet, you
need to have the Internet connection installed on
your TV before you install the USB Hard Drive.

1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect
another USB device to the other USB ports when
formatting.

2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,

press  (Pause). Trying to pause will start the
formatting.

Follow the instructions on screen.

5.6

Other Device

USB Flash Drive

You can view photos or play your music and videos
from a connected USB flash drive. Insert a USB flash
drive in one of the USB connections on the TV while
the TV is switched on.

The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press  SOURCES and select USB.

For more information on watching or playing content
from a USB flash drive, in Help, press the color
key  Keywords and look up Photos, Videos and
Music.

When the USB Hard Drive is formatted, leave it
connected permanently.

Warning

The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.

To read the instructions, in Help, press the color
key  Keywords and look up USB Hard Drive.

Formatting

Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard
Drive. If you want to record broadcasts with TV Guide
data from the Internet, you must setup the Internet
connection first before you install the USB Hard Drive.

USB Hard Drive

Installation

If you connect a USB Hard Drive, you can pause or
record a TV broadcast. The TV broadcast must be a
digital broadcast (ISDB broadcast or similar).

Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.

To Pause

To pause a broadcast, you need a USB-compatible

Warning

The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.

To format a USB Hard Drive…
1 - Connect the USB Hard Drive to one of

the USB connections on the TV. Do not connect
another USB device to the other USB ports when

12

formatting.

2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,

press  (Pause). Trying to pause will start the
formatting. Follow the instructions on screen.
4 - When the USB Hard Drive is formatted, leave it
connected permanently.

13

6

Switch Source

6.1

Source List

• To open the sources menu, press  SOURCES .

• To switch to a connected device, select the device
with the arrows  (left) or  (right) and press OK.

• To close the source menu without switching to a
device, press  SOURCES again.

6.2

Rename Device

 (Home) > Settings > All settings > General
settings > Input sources

• To edit the input sources names from the source list.

1 - Select one of the device and press OK.
2 - Select Edit and press OK.
3 - Follow the on screen instructions to rename the

device name.

14

7

Channels

7.1

About Channels and Switch
Channels

To watch TV channels

• Press . The TV tunes to the TV channel you last
watched.

• Press  (Home) > Watch TV > Channels and
press OK.

• Press  + or  - to switch channels.

• If you know the channel number, type in the number
with the number keys. Press OK after you entered
the number to switch channels.

• To switch back to the previously tuned channel,
press  BACK .

To switch to a channel from a channel list

• While watching a TV channel, press  LIST to
open the channel lists.

• The channel list can have several pages with
channels. To view the next or previous page,
press  + or  -.

• To close the channel lists without switching
channels, press  LIST again.

Channel icons

After an Automatic channel update of the channel list,
newly found channels are marked with a  (star).
If you lock a channel, it will be marked with
a  (lock).

Radio channels

If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.

1 - Select Start now and press OK.
2 - Select Update channels to only add new digital

channels.
3 - Select Start and press OK to update channels.
This can take a few minutes.

Quick reinstall
 (Home) > Settings > Install

Channels > Antenna/Cable Installation > Search
for channels

1 - Select Start now and press OK.
2 - Select Quick reinstall to install all channels again

with default settings.
3 - Select Start and press OK to update channels.
This can take a few minutes.

Advanced reinstall
 (Home) > Settings > Install

Channels > Antenna/Cable Installation > Search
for channels

1 - Select Start now and press OK.
2 - Select Advanced reinstall to do a full re-

installation which takes you through each step.
3 - Select Start and press OK to update channels.
This can take a few minutes.

Service Navigation

 (Home) > Settings > Install
Channels > Antenna/Cable Installation > Service
navigation

• If the Service navigation is set to On, You can
browse the primary and secondary channels by
pressing channel   and  .

• If the Service navigation is set to Off, you can only
browse the primary channels using
channel   and  .

This TV can receive digital television standard time
DVB. TV may not work properly with some operators
of digital television , non-compliance with
requirements of the standard in full.

7.2

Install Channel

Antenna/Cable Installation

Search for Channels
Update channels

 (Home) > Settings > Install
Channels > Antenna/Cable Installation > Search
for channels

Digital: Reception Test

 (Home) > Settings > Install
Channels > Antenna/Cable Installation > Digital:
reception test

The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with  and  and change the number
with  and . To check the frequency,
select Search and press OK.

15

Antenna Connection

Upload a Channel List

 (Home) > Settings > Install
Channels > Antenna/Cable Installation > Antenna
Connection

1 - Select Antenna or Cable, and press OK.
2 - Select Start and press OK. This can take a few

minutes.

Channel Logos

 (Home) > Settings > All settings > Channels
> Channel logos

In some countries, the TV can show the channel
logos. If you do not want these logos to appear, you
can switch them off.

Channel List copy

Introduction

Channel list copy is intended for dealers and expert

users.
With Channel list copy, you can copy the channels

installed on one TV onto another Philips TV of the
same range. With Channel list copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.

Conditions

• Both TVs must be from the same year range.

• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA

• Both TVs have compatible software versions.

Copy a Channel List, Check Channel List Version

Copy a channel list to USB flash drive

 (Home) > Settings > All settings
> Channels > Expert mode settings > Channel list

copy > Copy to USB

To not Installed TVs

Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.

To a TV that is not yet installed

1 - Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload,
press  (Home) > Settings > All settings
> Channels > Expert mode settings > Channel List
Copy > Copy to TV and press OK. Enter your PIN
code if necessary.
4 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.

To Installed TVs

Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.

To an already installed TV

1 - Verify the country setting of the TV. (To verify this
setting, see chapter Re-install channels. Start this
procedure until you reach the country setting.
Press  BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter Re-install channels and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload,
press  (Home) > Settings > All

settings > Channels > Expert mode
settings > Channel List Copy > Copy to TV and

press OK. Enter your PIN code if necessary.
4 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.

Check channel list version
 (Home) > Settings > All

settings > Channels > Expert mode
settings > Channel list copy > Current version

Channel Options

Open Options

While watching a channel, you can set some options.
Depending on the type of channel you are watching

or depending on the TV settings you made, some
options are available.

16

To open the options menu…

1 - While watching a channel, press  OPTIONS.
2 - Press  OPTIONS again to close.

7.3

Channel List

Open Channel List

Audio Language

If none of the preferred audio languages are
available, you can select another audio language if
available. If no audio languages are available, you
cannot select this option.

To read more information, in Help, press the color
key  Keywords and look up Audio Language.

Closed Caption

Switch Closed Caption On or Off with this options.
Select On During Mute to show closed captions
only when the sound is muted with .

Caption Service

Select the correct type of closed caption services.
For more information, in Help,
press  Keywords and look up Closed Caption.

To open the current channel list…

1 - Press , to switch to TV.
2 - Press  LIST to open the current channel list.
3 - Press  OPTIONS > Select channel list, and

select one channel list you want to watch.

4 - Press  LIST again to close the channel list.

Channel List Options

Open Option Menu

To open the channel list option menu...

• Press , to switch to TV.

• Press  LIST to open the current channel list.

• Press  OPTIONS , and select one of options.

• Press  LIST again to close the channel list.

Select Channel Filter

 LIST >  OPTIONS > Digital

Dual I-II

This option is available if an audio signal contains two
audio languages, but one or both languages has no
language indication.

Status

Select Status to view technical information on the
channel or a connected device you are watching.

Universal Access

Only available when Universal access is set to On.
 (Home) > Settings > All settings > Universal

access > Universal access > On.

To read more information, in Help, press the color
key  Keywords and look up Universal Access.

Select one of channel combinations showing in the
channel list.

Create or Edit Favorites Channel List

 LIST >  OPTIONS > Create favorites list
Select a channel then press OK to add in a favorites

channel list, once completed, press  Done.
 LIST >  OPTIONS > Edit favorites
Select a channel then press OK to add in or remove

from a favorites channel list, once completed, press

 Done.

Select Channel Range

 LIST >  OPTIONS > Select channel range
Select a range of channels in a favorites channel list,

once completed, press OK.

Select Channel List

 LIST >  OPTIONS > Select channel list
Select a range of channels in a favorites channel list,

once completed, press OK.

17