Page 1
Register your product and get support at
www.philips.com/welcome
32PFL3205H/12
32PFL3405H/12
32PFL3605H/12
42PFL3405H/12
42PFL3605H/12
47PFL3605H/12
EN User Manual
Downloaded From TV-Manual.com Manuals
Page 2
Model
www.philips.com/support
Serial
Österreich 0800 180 016
België/Belgique 80080190
България 00800 11 544 24
Hrvatska 01 6403 776 Lokalni poziv
Česká republika 800142840 Bezplatný hovor
Danmark 3525 8759 Lokalt opkald
Estonia 6008600 kohalik kõne tariifi
Suomi 09 2311 3415 paikallispuhelu
France 0805 025 510 numéro sans frais
Deutschland 0800 000 7520 gebührenfreier Anruf
Ελλάδα 0 0800 3122 1280 Κλήση χωρίς χρέωση
Magyarország 0680018189 Ingyenes hívás
Hrvatska 0800 222778 free
Ireland 01 601 1777
Italia 800 088774 Numero Verde
Қазақстан +7 727 250 66 17 local
Latvia 52737691 local
Lithuania 67228896 local
Luxemburg/Luxembourg 40 6661 5644 Ortsgespräch/Appel local
Nederland 0800 0230076 Gratis nummer
Norge 22 70 81 11 Lokalsamtale
Polska 00800-311-13-18 Pozosta?e produkty RTV oraz AGD
Portugal 800 780 903 Chamada Grátis
România 0800-894910
0318107125
Apel gratuit
Apel local
Россия (495) 961-1111 0.15 USD/minute
Србија +381 114 440 841 Lokalni poziv
Slovensko 0800 004537 Bezplatný hovor
Slovenija 00386 12 80 95 00 lokalni klic
España 900 800 655 Teléfono local gratuito solamente para
clientes en España
Sverige 08 5792 9100 Lokalsamtal
Suisse/Schweiz/Svizzera 0800 002 050 Schweizer Festnetztarif/ Tarif réseau fixe
France
Türkiye 0800 261 3302 Şehiriçi arama
United Kingdom General No: 0800 331 6015
General National Rate No:
0870 911 0036
free
National rate
Україна 0-800-500-697
Downloaded From TV-Manual.com Manuals
This information is correct at the time of press. For updated information, see www.philips.com/support.
Page 3
Contents
1 Notice 2
2 Important 4
3 Your TV 7
Side controls and indicators 7
Remote control 7
4 Use your TV 9
Switch your TV on / off or to standby 9
Switch channels 9
Watch connected devices 10
Adjust TV volume 10
Use teletext 10
5 Use more of your TV 11
Access TV menus 11
Rename devices from the home menu 11
Remove devices from the home menu 11
Change picture and sound settings 12
Use the universal access menu 15
Use advanced teletext features 15
Create and use list of favourite channels 16
Use the Electronic Programme Guide 17
Use the TV clock 18
Use timers 19
Use TV locks 20
Use subtitles 21
View photos and play music from a
USB storage device 22
Listen to digital radio channels 24
Update the TV software 24
Change TV preferences 25
Access decoder channel 26
Start a TV demo 26
Reset the TV to factory settings 26
6 Install channels 27
Automatically install channels 27
Manually install channels 28
Rename channels 29
Rearrange channels 29
Test digital reception 29
7 Connect devices 30
Back connector 30
Side connector 32
Connect a computer 33
Use a Conditional Access Module 34
Use Philips EasyLink 34
Use a Kensington lock 35
8 Product information 36
Supported display resolutions 36
Multimedia 36
Tuner / Reception / Transmission 36
Remote control 36
Power 36
Suppor ted TV mounts 37
Product specification 37
9 Troubleshooting 38
General TV issues 3 8
TV channel issues 38
Picture issues 39
Sound issues 39
HDMI connection issues 39
Computer connection issues 40
Contact us 40
10 Index 41
English
Downloaded From TV-Manual.com Manuals
EN
1
Page 4
1 Notice
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Warranty
Risk of injury, damage to T V or void of •
warranty! Never attempt to repair the TV
yourself.
Use the T V and accessories only as •
intended by the manufacturer.
The caution sign printed on the back of •
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
Any operation expressly prohibited in •
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
2
Downloaded From TV-Manual.com Manuals
EN
Page 5
Mains fuse (UK only)
This TV is fitted with an approved moulded
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Copyright
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
Manufactured under licence from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
All other registered and unregistered
trademarks are the proper ty of their respective
owners.
English
Note
Available in selected models only •
Downloaded From TV-Manual.com Manuals
EN
3
Page 6
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
Never expose the T V to rain or water. •
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the T V
checked before use.
Never place the TV, remote control or •
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
Never insert objects into the ventilation •
slots or other openings on the T V.
When the TV is swivelled ensure that •
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fire!
Never expose the remote control or •
batteries to rain, water or excessive heat.
Avoid force coming onto power plugs. •
Loose power plugs can cause arcing or
fire.
Risk of injury or damage to the TV!
Two people are required to lif t and carry •
a TV that weighs more than 25 kg.
When stand mounting the T V, use only •
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat, level
surface that can suppor t the combined
weight of the TV and the stand.
When wall mounting the TV, use only a •
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
Never place the TV on a sur face covered •
by a cloth or other material that can be
pulled away.
Ensure that no part of the TV hangs over •
the edge of the sur face.
Never place the TV on tall furniture (such •
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
Educate children about the dangers of •
climbing on furniture to reach the TV.
Risk of overheating!
Never install the TV in a confined space. •
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
Before you connect the TV to the power •
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Risk of injury, fire or power cord damage!
Never place the TV or any objects on the •
power cord.
To disconnect the TV power cord easily •
from the power outlet, ensure that you
have full access to the power cord at all
times.
4
Downloaded From TV-Manual.com Manuals
EN
Page 7
When you disconnect the power cord, •
always pull the plug, never the cable.
Disconnect the TV from the power •
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
Avoid using earphones or headphones at •
high volumes or for prolonged periods of
time.
Low temperatures
If the TV is transported in temperatures •
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Screen care
Avoid stationary images as much as •
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.•
Clean the TV and frame with a soft, •
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never •
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading, •
wipe off water drops as soon as possible.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
English
Downloaded From TV-Manual.com Manuals
EN
5
Page 8
Environmental efforts
High energy efficiency•
Low standby power•
Designed to facilitate recycling•
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
substances, energy-efficient use, end-of-life
instructions and product recycling.
Thanks to our environmental effort, this TV
has been awarded the European Ecolabel –the
flower– www.ecolabel.eu
You can find detailed information on standby
energy consumption, warranty policy, spare
parts and recycling of this TV on the Philips
website for your country at www.philips.com.
This TV has features that contribute to
energy-efficient use. This TV was awarded
the European Ecolabel for its environmental
qualities.
Energy efficiency features
• Ambient light sensor (Available in
selected models only)
To save energy, the built-in Ambient
light sensor lowers the brightness of the
TV screen when the surrounding light
darkens.
• Energy saving
The energy saving setting of the TV
combines several TV settings that result
in saving energy. See the smart settings in
the setup menu.
• Low standby power consumption
The class-leading and highly advanced
power circuitry brings down the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.
Power management
(Available in selected models only)
The advanced power management of this TV
ensures the most efficient use of its energy.
You can check how your personal TV settings,
the level of brightness in current onscreen
pictures and the surrounding light conditions
determine the relative power consumption.
End of use
To inform yourself on the correct disposal
of the TV and batteries, refer to ‘Disposal of
your old product and batteries’ in the user
manual (see ‘Disposal of your old product and
batteries’ on page 5).
6
Downloaded From TV-Manual.com Manuals
EN
Page 9
3 Your TV
Remote control
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
This section gives you an overview of
commonly used TV controls and functions.
Side controls and indicators
1
2
3
4
5
22
21
20
19
18
17
16
15
10
11
12
13
14
1
2
3
4
5
6
7
8
9
English
a +/-: Increases or decreases volume.
b
(Home): Toggles the home menu on
or off.
c P/CH +/-: Switches to the next or
previous channel.
d
(Power): Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
e Standby indicator and remote control
sensor.
Downloaded From TV-Manual.com Manuals
EN
7
Page 10
a (Standby-On)
Switches the TV to standby if it is on.•
Switches on the TV if it is in standby.•
b
MENU
Toggles the main menu on or off.
c MHEG/TELETEXT
Toggles teletext on or off.
SOURCE
d
Selects connected devices.
e Colour buttons
Selects tasks or options.
f AD (Audio Descriptor)
(For RF Digital TV only)
UK only: Enables audio commentary for
the visually handicapped.
g
OPTIONS
Accesses options relating to the current
activity or selection.
h OK
Confirms an entry or selection and
displays the channel grid, when watching
TV.
i
j
k
l P +/- (Programme +/-)
m 0-9 (Numeric buttons)
n
(Navigation buttons)
Navigates menus.
INFO
Displays program information, when
available. If the information spans multiple
pages, press OPTIONS to go to the next
page.
(Mute)
Mutes or restores volume.
Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up / Down.
Selects a channel or setting.
PICTURE (Smart picture)
Launches the picture menu.
o SOUND (Smart Sound)
Launches the sound menu.
p
+/- (Volume +/-)
Increases or decreases volume.
q
BACK P/P (Previous channel)
Returns to a previous screen.•
Returns to the previously viewed •
channel.
r
GUIDE
Switches between channel grid and
programme list.
s SUBTITLE (For RF Digital TV only)
Enables or disables subtitles.
t DEMO (Used in selected models only)
Toggles the demonstration menu on or
off.
u
FORMAT
Selects a picture format.
v
INCR. SURR
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
Remote control usage
When using the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight
between the remote control and TV is not
blocked by furniture, walls or other objects.
~5m
~30˚
8
Downloaded From TV-Manual.com Manuals
EN
Page 11
4 Use your TV
Switch channels
This section helps you perform basic TV
operations.
Switch your TV on / off or to
standby
To switch on
If the standby indicator is off, press •
(Power) at the side of the TV.
If the standby indicator is red, press •
(Standby-On) on the remote control.
To switch to standby
Press •
(Standby-On) on the remote
control.
The standby indicator switches to red. »
To switch off
Press •
(Power) at the side of the TV.
The standby indicator switches off. »
Press • P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the •
Numeric buttons.
Press • OK to use the channel grid.
Press •
control to return to the previous channel.
When you use a favourite list, you can only •
selec t those channels in the list (see ‘Selec t a
favourite list’ on page 16).
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
BACK P/P on the remote
Note
1 Press OK.
The channel grid appears. »
2 Press to select and preview a
channel.
3 Press OK to watch the selected channel.
English
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
Downloaded From TV-Manual.com Manuals
EN
9
Page 12
Watch connected devices
Note
Switch on the device before selecting it as a •
source on the TV.
Use the source button
1 Press SOURCE.
The source list appears. »
2 Press to select a device.
3 Press OK to confirm your choice.
The TV switches to the selected »
device.
Adjust TV volume
Use teletext
1 Press MHEG/TELETEXT.
The main index page appears. »
2 Select a page as follows:
Press the • Numeric buttons to enter
a page number
Press • P +/- to view the next or
previous page
Press the • Colour buttons to select a
colour coded item
Press •
previously viewed page
3 Press MHEG/TELETEXT to exit teletext.
Note
For UK users only: Some digital TV channels •
offer dedicated digital text ser vices (for
example, BBC1).
BACK to return to a
To increase or decrease volume
Press •
To mute or unmute sound
Press •
Press •
10
Downloaded From TV-Manual.com Manuals
EN
+/-.
to mute the sound.
again to restore the sound.
Page 13
5 Use more of
your TV
Access TV menus
Menus help you to install channels, change
picture and sound settings and access other
features.
1 Press MENU.
The menu screen appears. »
Add new device
Watch TV
Setup
2 Press to select and navigate
through one of the following menus.
• [Watch TV]: Switches back to the
aerial source if another source is
selected.
• [Add new device]: Adds new devices
to the home menu.
• [Setup]: Accesses menus to change
picture, sound and other settings.
3 Press OK to confirm your choice.
4 Press MENU to exit.
Tip
After selecting • [Add new device], follow the
on-screen instruc tions to select the correct
device and connector.
Rename devices from the
home menu
After adding a new device to the home menu,
you can rename it to your preference.
1 Press MENU.
2 Press to select a device to rename.
3 Press OPTIONS.
The options menu appears. »
4 Press to select [Rename device], then
press OK.
A text input box appears. »
5 Press to select characters.
6 Press OK to confirm each character.
7 Select [Done], then press OK to finish
renaming devices.
Note
The device name can be up to 16 characters •
long.
Press • [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
Remove devices from the
home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1 Press MENU.
2 Press to select a device to remove.
3 Press OPTIONS.
4 Press to select [Remove device], then
press OK.
5 Select [Remove], then press OK.
The selected device is removed from »
the home menu.
English
Downloaded From TV-Manual.com Manuals
EN
11
Page 14
Change picture and sound
settings
Change picture and sound settings to suit your
preferences. You can apply pre-defined settings
or change settings manually.
Note
When watching TV or using external devices, •
press OPTIONS then select [Picture and
sound] for quick access to picture and sound
settings.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1 Press MENU.
2 Press to select [Setup] > [Picture]
> [Settings assistant].
3 Press OK.
The » [Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
Use smart picture
Use smart picture to apply pre-defined
picture settings.
1 Press PICTURE.
The » [Smart picture] menu appears.
2 Press to select one of the following
settings.
• [Personal]: Applies the settings set in
[Settings assistant] menu.
• [Vivid]: Applies rich and dynamic
settings.
• [Standard]: Adjusts picture settings
to suit most environments and types
of video.
• [Cinema]: Applies settings for movie
viewing.
• [Game]: Applies settings for games.
• [Energy saving]: Applies low-energy
settings.
• [Natural]: Applies the best picture
quality.
• [Custom]: Lists customised picture
settings.
3 Press OK to confirm your choice.
The selected smart picture setting is »
applied.
Manually adjust picture settings
1 Press MENU.
2 Press to select [Setup] >
[Picture].
3 Press to select the following
settings.
• [Smart picture]: Accesses pre-defined
smar t picture settings.
• [Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
• [Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
• [Brightness]: Adjusts the intensity and
details of dark areas.
• [Colour]: Adjusts colour saturation.
• [Hue]: Compensates for colour variations.
• [Sharpness]: Adjusts sharpness in the
image.
• [Noise reduction]: Filters and reduces
noise in an image.
• [Tint]: Adjusts the colour balance in an
image.
• [Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)
• [Crystal Clear]: Fine-tunes each pixel to
match surrounding pixels. This produces a
brilliant, high-definition image.
• [Dynamic contrast]: Enhances
contrast. A [Medium] setting is
recommended.
12
Downloaded From TV-Manual.com Manuals
EN
Page 15
• [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]:
Smoothes out transitions on digital
pictures. You can switch this feature
on or off.
• [Colour enhancement]: Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
• [PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
• [Picture format]: Changes the picture
format.
• [Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
• [Horizontal shift]: Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
• [Vertical shift]: Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.
Change picture format
1 Press FORMAT.
A picture format bar appears. »
2 Press to select a picture format.
The selected picture format is »
activated.
3 Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be
configured.
Note
[Auto format]:
(Not for PC mode.)
Automatically displays the
suitable picture format. If
not, widescreen is applied.
[Super zoom]:
(Not for HD and PC
mode.) Removes the
black bars on the side of
4:3 broadcasts. There is
minimal distortion.
[4:3]: Shows the classic 4:3
format.
[Subtitle zoom]: Displays
4:3 pictures over the full
area of the screen, with
sub-titles visible. Part of
the top of the picture is
clipped off.
[Movie expand 14:9]: (Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
[Movie expand 16:9]:
(Not for HD and PC
mode.) Scales 4:3 format
to 16:9.
[Wide screen]: Scales 4:3
format to 16:9.
[Unscaled]: For HD
and PC mode only,
and in selected models
only. Allows maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.
English
Depending on the format of the picture •
source, some picture settings are not available.
Downloaded From TV-Manual.com Manuals
EN
13
Page 16
Use smart sound
Use smart sound to apply pre-defined sound
settings.
1 Press SOUND.
The » [Smart sound] menu appears.
2 Press to select the following settings.
• [Custom]: Applies the settings that
were customised in the sound menu.
• [Standard]: Adjusts sound settings
to suit most environments and types
of audio.
• [News]: Applies settings for spoken
audio, such as news.
• [Movie]: Applies settings for movies.
3 Press OK to confirm your choice.
The selected smart sound setting is »
applied.
Manually adjust sound settings
1 Press MENU.
2 Press to select [Setup] > [Sound].
The » [Sound] menu appears.
3 Press to select the following
settings.
• [Smart sound]: Accesses pre-defined
smar t sound settings.
• [Bass]: Adjusts the bass level.
• [Treble]: Adjusts the treble level.
• [Digital audio lipsync]: Enables or disables
lipsync audio output. When this is
enabled, the TV synchronises the audio
and video per formance. When disabled,
you need to adjust the lipsync audio
feature on the external device that is
connected to the TV.
(Only available with SPDIF connection)
• [Volume]: Adjusts the volume.
• [Vol.vis.impaired]: Sets the mix of visually
impaired audio with regular audio. When
available, visually impaired audio includes
audio descriptions of on-screen action.
You can also enable this by pressing
AD (Audio Descriptor). (Only applicable
for the UK region.)
• [Balance]: Adjusts the balance of the right
and left speakers.
• [Audio language]: Available for digital
channels, when multiple languages are
broadcast. Lists available audio languages.
• [Dual I-II]: Selects audio languages if dual
sound broadcast is available.
• [Mono/Stereo]: Selects mono or stereo if
stereo broadcast is available.
• [TV speakers]: Turns TV speakers on or
off. (Only available if EasyLink is switched
on.)
• [Surround]: Enables spatial sound.
• [Headphone volume]: Adjusts headphone
volume.
• [Auto volume levelling]: Automatically
reduces sudden volume changes, for
example, when switching channels.
• [Delta volume]: Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change the
delta volume.
• [SPDIF OUT]: Selects the type of digital
audio output through SPDIF connector.
• [PCM]: Conver ts non-PCM audio
type to PCM format.
• [Multichannel]: Outputs audio to the
home theater.
14
Downloaded From TV-Manual.com Manuals
EN
Page 17
Use the universal access
menu
Use advanced teletext
features
You can activate the universal access menu
during the first installation. Once enabled, you
can quickly access the visually impaired and
hearing impaired menus when watching TV or
external devices.
Tip
You can also enable the universal access •
menu by selecting [Setup] > [Installation] >
[Preferences] > [Universal access] > [On].
1 When watching T V, press OPTIONS.
The TV options menu appears. »
2 Select [Universal access], then press OK
or
to enter.
3 Press to select one of the following
options and press OK to enter.
• [Hearing impaired]: Enables or
disables hearing impaired subtitles.
• [Visually impaired]: Selects speaker,
headphone or both for
[Vol.vis.impaired] audio. Select [Off]
to disable audio descriptor. (Only
applicable to the UK region).
• [Vol.vis.impaired]: Adjusts the
volume of visually impaired audio.
Tip
Press the colour buttons on the remote •
control to enter the options.
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1 Press MHEG/TELETEXT.
The teletext screen appears. »
2 Press OPTIONS.
The teletext options menu appears. »
3 Press to select one of the following
options.
• [Reveal]: Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
• [Cycle subpage]: Cycles through
subpages automatically if subpages
are available.
• [Language]: Switches to a different
language group to display a language
correctly when it uses a different
character set.
• [Freeze page]: Freezes the current
page.
• [Dual screen] / [Full Screen]: Enables
and disables dual screen teletext.
4 Press to make a selection, then
press OK to confirm.
5 Press BACK to exit the teletext
options menu.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1 Press MHEG/TELETEXT.
The teletext screen appears. »
2 Press P +/- to select a teletext page.
3 Press to enter a subpage.
English
Downloaded From TV-Manual.com Manuals
EN
15
Page 18
Select T.O.P. teletext broadcasts
Table Of Pages ( T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
1 Press MHEG/TELETEXT.
The teletext screen appears. »
2 Press INFO.
The T.O.P. overview appears. »
3 Press to select a subject.
4 Press OK to view the page.
Use Teletext 2.5
Teletext 2.5 offers more colours and better
graphics than normal teletex t. If Teletext 2.5
is broadcast by a channel, it is switched on by
default.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Preferences] >
[Teletext 2.5].
3 Press to select [On] or [Off].
4 Press OK to confirm your choice.
Create and use list of
favourite channels
You can create a list of your preferred TV
channels so that you can find those channels
easily.
Select a favourite list
1 When watching T V, press OK to display
the channel grid.
2 Press OPTIONS.
The channel options menu appears. »
3 Press to select [Select list], then
press OK to enter.
The channel list options appear. »
4 Select [Favourite], then press OK.
Only channels in the favourite list »
appear in the channel grid.
Note
The favourite channel grid is empty until you •
add channels into the favourite lists.
View all channels
You can exit a favourite list, and view all
installed channels.
1 When watching T V, press OK.
The channel grid appears. »
2 Press OPTIONS.
The channel options menu appears. »
3 Press to select [Select list], then
press OK or
to enter.
4 Select [All], then press OK.
All channels are displayed in the »
channel grid.
16
Downloaded From TV-Manual.com Manuals
EN
Note
All favourite channels are marked by an •
asterisk when you view the channel grid.
Page 19
Add a channel to a favourite list
Tip
View all channels before adding a channel to a •
favourite list.
1 When watching T V, press OK.
The channel grid appears. »
2 Press to select a channel to add to
a favourite list.
3 Press OPTIONS.
The channel options menu appears. »
4 Select [Mark as favourite], then press
OK.
The channel is added to the favourite »
list.
Note
All favourite channels are marked by an •
asterisk in the channel grid.
Use the Electronic
Programme Guide
EPG is an on-screen guide available for digital
channels. EPG allows you to:
View a list of digital programmes being •
broadcast
View upcoming programmes•
Group programmes by genre•
Set reminders when programmes start•
Set up preferred EPG channels•
Switch on EPG
1 When watching T V, press GUIDE.
The EPG planner screen appears »
displaying information about the
scheduled programmes.
Note
EPG data is available only in selected countries •
and can take some time to load.
English
Remove a channel from a favourite
list
1 When watching T V, press OK.
The channel grid appears. »
2 Press to select a channel to
remove.
3 Press OPTIONS.
4 Select [Unmark as fav.], then press OK.
The channel is removed. »
Downloaded From TV-Manual.com Manuals
Use EPG
1 When watching T V, press GUIDE.
The EPG planner screen appears. »
2 Press MENU.
The program guide menu appears. »
3 Press to select an option, and then
press OK to confirm.
4 Press MENU to exit the EPG menu.
Note
Only the channels in the • [Preferred EPG
channels] list appear in the EPG menu.
17
EN
Page 20
Use the EPG options menu
Use the EPG options menu to set or clear
reminders, change day and access other useful
EPG options.
1 Press GUIDE.
2 Press OPTIONS.
The EPG menu appears. »
3 Press to select one of the following
options.
• [Set remind] / [Clear remind]: Sets
or clears programme reminders.
• [Change day]: Sets the EPG day.
• [Show info]: Displays programme
information.
• [Search by genre]: Searches TV
programmes by genre.
• [Scheduled reminders]: Lists
programme reminders. Only
available for upcoming programmes.
• [Preferred EPG channels]: Sets
preferred EPG channels.
4 Press OK to enter or activate the option.
5 Press BACK to exit the EPG menu.
Tip
Press • GUIDE to switch between EPG and
channel grid.
Use the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Set the TV clock manually
In some countries, you need to set TV clock
manually.
1 Press MENU.
2 Select [Setup] > [Features] > [Clock].
The » [Clock] menu appears.
3 Press to enter time.
4 Select [Done] to confirm.
5 Press MENU to exit.
Note
If your selected country supports digital •
broadcast, the clock displays the time data
from your TV service operator as priority.
Display the TV clock
1 When watching T V, press OPTIONS.
The TV option menu appears. »
2 Select [Clock].
3 Press OK.
18
Downloaded From TV-Manual.com Manuals
EN
Note
To disable the clock, repeat the above •
procedure.
Page 21
Change the clock mode
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Auto clock
mode].
3 Press to select [Automatic] or
[Manual].
4 Press OK to confirm.
Use timers
You can set timers to switch the TV to standby
at a specified time.
Tip
Set the TV clock before you use timers. •
English
Change the time zone
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Time zone].
3 Press to select your time zone.
4 Press OK to confirm.
Note
This option is only available if you select • [Auto
clock mode] > [Manual] (in countries with
clock transmission data).
Use daylight saving
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Clock] > [Daylight
saving].
3 Press OK or to enter [Daylight saving].
4 Press to select [Standard time] or
[Daylight saving time].
5 Press OK to confirm.
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the T V to standby after a
pre-defined period of time.
Tip
You can switch off your TV earlier or reset the •
sleep timer during the countdown.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Sleep timer].
The » [Sleep timer] menu appears.
3 Press to select a value between zero
and 180 minutes.
The sleep timer can be set in steps of »
five minutes. If set to zero, the sleep
timer is switched off.
4 Press OK to switch on the sleep timer.
The TV switches to standby after the »
specified time.
Note
This option is only available if you select •
[Auto clock mode] > [Manual].
Downloaded From TV-Manual.com Manuals
EN
19
Page 22
Automatically switch the TV on (on
timer)
You can switch on the TV from standby to a
specific channel at a specified time.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [On timer].
3 Press to enter the [On timer] menu.
• [Activate]: Selects how often the T V
is switched on.
• [Time]: Sets the time to switch on
the TV.
• [Programme no.]: Selects the
channel or the connected device.
4 Press MENU to exit.
Tip
Select • [On timer] > [Activate] > [Off] to
disable this feature.
Use TV locks
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Set or change your PIN code
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Set code] / [Change code].
The » [Set code] / [Change code] menu
appears.
3 Enter your code using the Numeric
buttons.
Follow the on-screen instructions to »
create or change your PIN code.
Tip
If you forget your code, enter ‘8888’ to •
override any existing codes.
Lock or unlock the TV
Lock the T V to prevent access to all channels
and connected devices.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [TV lock].
You are prompted to enter your PIN »
code.
3 Enter your code using Numeric buttons.
The » [TV lock] menu appears.
4 Press to select [Lock] or [Unlock].
5 Press OK to confirm.
All channels and connected devices are »
locked or unlocked.
6 Press MENU to exit.
Note
Switch the TV off and on again for the change •
to take effec t.
If you select • [Lock], you have to enter your
code every time you turn on your TV.
Lock the TV for a specific time
1 Press .
2 Press to select
[Setup] > [Features] > [Lock after].
You are prompted to enter your PIN »
code.
3 Enter your code using Numeric buttons.
4 Select [On].
The feature menu appears. »
5 Select [Time], then press OK.
6 Enter the time with the Numeric buttons
or the Navigation buttons.
7 Select [Done].
The TV automatically switches off at »
the specific time.
20
Downloaded From TV-Manual.com Manuals
EN
Page 23
Note
You have to enter your code every time you •
turn on your TV.
Switch the TV off and on again for the change •
to take effec t.
Lock or unlock one or more channels
1
When watching TV, press OK to display the
channel grid.
2
Press to select a channel to lock or
unlock.
3
Press OPTIONS.
4
Press to select [Lock channel] or
[Unlock channel].
5
For each selection, press OK to lock or
unlock the channel.
The first time you lock or unlock a »
channel, you are prompted to enter your
PIN code.
6 Enter your code and press OK.
If the channel is locked, a lock icon is »
displayed.
7 Repeat the process to lock or unlock
more channels.
Note
Switch the TV off and on again for the change •
to take effec t.
If you use
• P +/- on your remote control to
switch between channels, the locked channels
are skipped.
If you access the locked channels from the
•
channel grid, you are prompted to enter your
PIN code.
Set parental ratings
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings higher than your child’s age.
1
Press MENU.
2
Press to select [Setup] > [Features]
> [Parental rating].
A code setup screen appears. »
3
Enter your code using Numeric buttons.
The parental rating menu appears. »
4
Press to select an age rating.
5
Press OK to confirm.
6
Press MENU to exit.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-T
digital broadcasts. With digital broadcasts, you
can select a subtitle language.
Enable subtitles on analogue TV
channels
1 Select an analogue TV channel.
2 Press MHEG/TELETEXT.
3 Enter the three-digit page number of the
subtitle page with the Numeric buttons.
4 Press MHEG/TELETEXT to switch off
teletext.
5 Press SUBTITLE.
The » [Subtitle mode] menu appears.
6 Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
7 Press OK to enable subtitles.
8 Repeat this procedure to enable subtitles
on each analogue channel.
English
Downloaded From TV-Manual.com Manuals
EN
21
Page 24
Tip
Select • [Subtitle mode] > [Off] to disable
subtitles.
Enable subtitles on digital TV channels
1 When watching digital channels, press
SUBTITLE.
The » [Subtitle mode] menu appears.
2 Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
3 Press OK to enable subtitles.
Select a subtitle language on digital TV
channels
View photos and play music
from a USB storage device
Caution
Philips is not responsible if the USB storage •
device is not supported, nor is it responsible
for damage or loss of data from the device.
Use the USB connector to view photos or
listen to music stored on a USB storage device.
1 Turn on the TV.
2 Connect the USB storage device to the
TV.
The home menu appears. »
3 Press to select [Browse USB].
4 Press OK to confirm.
The USB thumbnail browser appears. »
Note
When you select a subtitle language on •
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Subtitle language].
3 Press OK or to enter the list of
available languages.
4 Press to select a subtitle language.
5 Press OK to confirm.
Tip
You can also access the • [Subtitle language]
menu while watching T V by pressing
OPTIONS > [Subtitle language].
Tip
Press • GUIDE to switch between thumbnail
and file browsing views.
View photos
1 In the USB browser, press to enter the
[Picture] folder.
2 Press to select a photo or a photo
album.
3 Press OK to view a full screen image of
the photo.
Tip
When in full screen mode, press • to move
between photos.
22
Downloaded From TV-Manual.com Manuals
EN
Page 25
View a slide show of your photos
1
When a full screen image of a photo is
displayed, press OK.
A slide show begins from the selected »
photo.
2
Press the following buttons to control the
slide show:
• OK to pause the slide show.
•
to go back or move forward to the
next image.
•
BACK to stop the slide show.
Change slide show settings
1
When viewing a slide show, press
OPTIONS.
The slide show options menu appears. »
2 Press to select one of the following.
• [Start Slideshow] / [Stop Slideshow]:
Star ts or stops a slide show.
• [Slideshow transitions]: Sets the
transition from one picture to the
next.
• [Slideshow frequency]: Sets the
amount of time that a picture is
shown.
• [Rotate image]: Rotates a picture.
• [Show info]: Displays the picture
name, date, size and next picture in
the slide show.
3 Press OK to confirm your setting.
Note
Listen to music
1
In the USB thumbnail browser view,
select [Music] and press
Press •
GUIDE to switch between
thumbnail and file browsing views.
to enter.
2 Press to select a music track or
album.
3 Press OK to play the selected music.
Button Function
OK Pause, resume play or stop
/
Music settings
When listening to music, press OPTIONS
to access one of the following music settings.
• [Start playback] / [Stop playback]: Starts
or stops the music.
• [Repeat] / [Play once]: Repeats a song. /
Disables repeat play and plays a song or
album once.
• [Shuffle on] / [Shuffle off]: Enables or
disables random play of songs.
• [Show info]: Displays the file name.
• [TV speakers]: Sets the TV speakers
on or off. (Only available if EasyLink is
switched on.)
• [Sound]: Adjusts the sound setting.
playback.
Go to the previous or next
music.
English
• [Rotate image] and [Show info] appear only
when you press OK to pause the slideshow.
Downloaded From TV-Manual.com Manuals
View a slideshow with music
You can view a picture slide show with
background music.
1 Select an album of songs.
2 Press OK.
3 Press BACK to return to the USB
content browser.
4 Select an album of pictures.
5 Press OK.
EN
23
Page 26
Disconnect a USB storage device
Update the TV software
Caution
Follow this procedure to avoid damage to your •
USB storage device.
1 Press BACK to exit the USB browser.
2 Wait for five seconds then disconnect the
USB storage device.
Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed automatically during
installation.
1 When watching T V, press OK to display
the channel grid.
2 Press OPTIONS.
3 Press to select [Select list] > [Radio].
The radio channel grid appears. »
4 Press to select a radio channel and
press OK to listen.
Note
Select • [Select list] > [All] to exit radio
channels and view all channels.
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1 Press MENU.
2 Press to select [Setup] >
[Software update] >
[Current software info].
The TV displays the current software »
information.
Download the software
1 On your PC, open a web browser and go
to www.philips.com/support.
2 Download the latest software upgrade
file to your PC.
3 Decompress the ZIP-file.
4 Copy the autorun.upg file to the root
director y of the USB device.
Update software
You can update the TV software via a USB
storage device or OAD
(Over the Air software Download).
24
Downloaded From TV-Manual.com Manuals
EN
Update using a USB device
Connect your USB storage device to the TV.
1 If the software update screen does not
appear automatically, select
[Setup] > [Software update] >
[Local updates] > [USB].
2 Press OK to update the T V software
manually.
3 Follow the on-screen instructions to
complete the update.
Note
The TV restarts after the software update is •
complete.
Page 27
Update using OAD
1
If using (DVB-T) digital broadcast, your
TV automatically receives software
updates. If you receive a message on
your screen asking you to update your
software:
Select • [Update now] to update the
software immediately.
Select • [Remind me later] to exit the
update screen at that time and be
reminded later.
Select • [Cancel] to skip the update.
2 If you select [Cancel], you can manually
access the OAD update by selecting
[Setup] > [Software update] > [Local
updates] > [OAD].
3 Select the available version of OAD and
press OK.
4 Follow the on-screen instructions to start
the update.
Note
The TV restarts after the software update is •
complete.
Change TV preferences
Use the preferences menu to customise your
TV settings.
1 Press
2 Select [Setup] > [Installation] >
MENU.
[Preferences].
• [Location]: Optimises TV settings for
your location - home or shop.
• [Volume bar]: Displays the volume
bar when you adjust the volume.
• [Channel info.]: Displays information
about the TV channel every time you
switch channels. Select [Full] to view
channel information or [Off] to turn
off the channel information.
• [Universal access]: Enables or
disables the universal access menu.
• [EasyLink]: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [Pixel Plus Link]: Overrides the
settings of connected devices and
uses the settings of the TV.
(Only available if EasyLink is switched
on.)
• [Teletext 2.5]: Enables or disables
Teletext 2.5. (For digital TV)
• [E-sticker]: For shop mode only. Sets
the location of the e-sticker.
3 Press to select your preference.
4 Press OK.
5 Press MENU to exit.
English
Downloaded From TV-Manual.com Manuals
EN
25
Page 28
Access decoder channel
Start a TV demo
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
Set decoder channel
Map channels from a decoder or descrambler.
1 Press MENU.
2 Select [Setup] > [Installation] >
[Decoder].
3 Press to enter [Decoder] menu.
4 Press to select [Channel], then press
to enter.
5 Select one channel to map to the
decoder / descrambler channel and press
OK to confirm.
6 Select [Status], then press to enter.
7 Select [EXT 1] (SCART) the connector
used by the decoder / descrambler.
8 Press OK.
9 Press MENU to exit.
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1 Press DEMO on the remote control.
2 Press to select a demo and press
OK to view it.
3 Press DEMO to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1 Press MENU.
2 Select [Setup] > [Installation] >
[Factory settings].
3 Press to enter [Factory settings].
4 Select [Reset] to star t resetting.
5 Press OK.
6 Press MENU to exit.
Note
Select • [None] if you do not want to map to
the decoder / descrambler channel.
26
Downloaded From TV-Manual.com Manuals
EN
Page 29
6 Install channels
The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
Step 1 Select your menu language
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Language] > [Menu
language].
3 Press OK or to enter [Menu language].
4 Press to select a language.
5 Press OK to confirm.
6 Press to return to [Installation] menu.
Step 3 Install channels
Automatically installs the available analogue
and digital T V channels and digital radio
channels.
1 From the channel installation guide
screen, select [Full installation].
2 Press OK to confirm.
The TV starts to search and store all »
the available channels.
3 When installation is complete, press OK
to exit the installation menu.
Update the channel list
You can enable automatic update of channels
when your TV is in standby mode. The
channels stored in your TV are updated every
morning according to the channel information
in the broadcast.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Standby update].
3 Select [On] to enable the automatic
update or select [Off ] to disable it.
English
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the countr y are
installed on the TV.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Automatic channel search].
3 Press OK or to enter the menu.
The country menu appears. »
4 Press to select your country.
5 Press OK to confirm your choice.
The channel installation guide appears »
on the screen.
Downloaded From TV-Manual.com Manuals
EN
27
Page 30
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your sys tem settings are •
correct.
1 Press MENU.
2 Press to select [Setup] >
[Installation] >[Channel installation]
>[Analogue: manual install].
The » [Analogue: manual install] menu
appears.
3 Press to select [System], then press
to enter.
4 Press to select your country or
region.
5 Press OK to confirm.
6 Press to return to [Channel
installation] menu.
Step 2 Search and store new TV channels
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: manual install].
The » [Analogue: manual install] menu
appears.
3 Press to select [Search], then press
to enter.
4 Press to manually enter the three-
digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the »
selected frequency, press OK to search
for the next available channel.
6 Press BACK when the new channel is
found.
7 Press to select [Store as new
channel] to store the new channel under
a new channel number.
8 Press OK to enter [Store as new
channel], then press OK.
9 Press to return to the [Channel
installation] menu.
Step 3 Fine-tune analogue channels
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: manual install].
The » [Analogue: manual install] menu
appears.
3 Press to select [Fine-tune], then press
to enter.
4 Press to adjust frequency.
5 Press OK to confirm.
6 Press to select [Store current
channel] to store the channel number.
7 Press to enter [Store current channel],
then press OK.
8 Press to return to the [Channel
installation] menu.
28
Downloaded From TV-Manual.com Manuals
EN
Page 31
Rename channels
Test digital reception
You can rename channels. The name appears
when you select the channel.
1 When watching T V, press OK to display
the channel grid.
2 Select the channel to rename.
3 Press OPTIONS.
The channel options menu appears. »
4 Press to select [Rename channel],
then press OK.
A text input box appears. »
5 Press to select characters.
6 Press OK to confirm each character.
7 Select [Done], then press OK to finish
renaming channels.
Tip
Press • [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
Rearrange channels
After you install channels, you can rearrange the
order in which they appear.
1
When watching TV, press OK to display the
channel grid.
2
Press OPTIONS.
The channel options menu appears. »
3
Press to select [Reorder], then press OK.
4
Select the channel to rearrange, then press
OK.
The selected channel is highlighted. »
5
Press to move the highlighted channel
to the desired location, then press OK.
6
Press OPTIONS.
» [Done reordering] appears on the screen.
7
Press OK to confirm.
8
Press BACK to exit the channel grid.
You can check the quality and signal strength of digital
channels. This allows you to reposition and test your
antenna or satellite dish.
1 Press MENU.
2 Press
[Installation] > [Channel installation] >
[Manual channel search].
3 Press
4 Press
the channel you want to test.
5 Press OK to confirm the frequency, then
press OK again to confirm [Search].
6 When complete, select [Store] to store
the frequency.
Note
If the signal quality and strength is poor, •
reposition the aerial or satellite dish and retest.
If you still have problems with the reception •
of your digital broadcast, contact a specialised
installer.
to select [Setup] >
to enter the menu.
to enter the frequency of
English
Downloaded From TV-Manual.com Manuals
EN
29
Page 32
7 Connect devices
This section describes how to connect devices
with different connectors. Examples are
provided in the Quick Start.
Note
You can use different types of connectors to •
connect a device to your TV.
a TV ANTENNA
Signal input from an antenna, cable or
satellite.
TV ANTENNA
Back connector
b EXT 1 and EXT 2 (CVBS and RGB)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
c SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
SPDIF OUT
30
Downloaded From TV-Manual.com Manuals
EN
Page 33
d SERV. U
For use by service personnel only.
e PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
VGA
g EXT 3 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
English
VGA
f HDMI 1
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
AUDIO IN
LEFT/RIGHT
VGA/DVI
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 33).
Downloaded From TV-Manual.com Manuals
EN
31
Page 34
Side connector
b VIDEO
Composite video input from analogue
devices such as VCRs.
c USB
Data input from USB storage devices.
a AUDIO L/R
Audio input from analogue devices
connected to VIDEO.
32
Downloaded From TV-Manual.com Manuals
EN
d HDMI
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
Page 35
e (Headphone)
Stereo audio output to headphones or
earphones.
f COMMON INTERFACE
Slot for a Conditional Access Module
(CAM).
• DVI-HDMI cable
AUDIO IN
LEFT/RIGHT
VGA/DVI
English
DVI
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your •
computer to 60Hz.
Select a supported screen resolution on •
your computer.
Connect a computer with one of the
following connectors:
Note
Connections via DVI or VGA require an •
additional audio cable.
• HDMI cable
• HDMI cable and HDMI-DVI adaptor
AUDIO IN
LEFT/RIGHT
VGA/DVI
• VGA cable
AUDIO IN
LEFT/RIGHT
VGA/DVI
VGA
DVI
VGA
Downloaded From TV-Manual.com Manuals
EN
33
Page 36
Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
Refer to the documentation from your service •
operator on how to insert a smart card into
the Conditional Access Module.
Insert and activate a CAM
Access CAM services
1 After inser ting and activating the CAM,
press
MENU.
2 Press to select [Setup] >
[Features] > [Common interface].
Applications provided by the digital TV »
service operator appear on the screen.
Note
This menu option is available only if the CAM •
is inserted and activated correctly.
Caution
Be sure to follow the instructions described •
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1 Switch off the TV and disconnect it from
the power outlet.
2 Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3 Push the CAM in as far as it will go.
4 Reconnect the TV to the power outlet.
5 Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
CAM will deactivate digital services.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
The EasyLink-compliant device must be •
switched on and selected as the source.
Philips does not guarantee 100% •
interoperability with all HDMI CEC devices.
34
Downloaded From TV-Manual.com Manuals
EN
Page 37
EasyLink features
One-touch play
When you connect your TV to devices that
support one-touch play, you can control your
TV and the devices with one remote control.
One-touch standby
When you connect your TV to devices that
suppor t standby, you can use your TV remote
control to put your TV and all connected
HDMI devices in standby mode.
System audio control
When you connect your TV to HDMI
CEC compliant devices, your TV can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your TV.
You can use the remote control from the
connected device to adjust the volume.
Set TV speakers to EasyLink mode
When you play content from an EasyLink compliant
home theater, the TV speakers are automatically
muted.
1 Enable one-touch play and one-touch
standby between your Easylink compliant
devices by following the instructions
in the previous section (see ‘Enable or
disable EasyLink’ on page 35).
2 Press MENU.
3 Press to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
The TV speakers are turned off »
automatically when content from an
Easylink compliant system is detected.
4 Press to select [Setup] > [Sound]
> [TV speakers] > [On] to disable
system audio control and enable the TV
speakers.
English
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not •
intend to use it.
1 Press MENU.
2 Press to select
[Setup] > [Installation] > [Preferences]
> [EasyLink].
3 Select [On] or [Off].
Use one-touch play
1 After enabling EasyLink, press play on
your device.
The TV automatically switches to the »
correct source.
Use one-touch standby
1 Press (Standby-On) on the TV’s or
device’s remote control.
The TV and all connected HDMI »
devices switch to standby.
Downloaded From TV-Manual.com Manuals
Note
To mute the TV speakers, select • [TV
speakers] > [Off].
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
35
EN
Page 38
8 Product
Multimedia
information
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
Supported display resolutions
Computer formats
Resolution - refresh rate:•
640 x 480 - 60Hz•
800 x 600 - 60Hz•
1024 x 768 - 60Hz•
1280 x 720 -60Hz•
1280 x 768 -60Hz•
1280 x 1024 - 60 Hz•
1360 x 768 - 60Hz•
1440 x 900 - 60Hz •
(For Full HD only)
1680 x 1050 - 60Hz •
(For Full HD only)
Video formats
Resolution - refresh rate:•
480i - 60Hz•
480p - 60Hz•
576i - 50Hz•
576p - 50Hz•
720p - 50Hz, 60Hz•
1080i - 50Hz, 60Hz•
1080p - 24Hz, 25Hz, 30Hz, 50Hz, •
60Hz.
Supported storage device: USB (Only •
FAT or FAT 32 USB storage devices are
supported)
Supported multimedia file formats:•
Images: JPEG•
Audio: MP3•
Note
Multimedia file names mus t not exceed 128 •
characters.
Tuner / Reception /
Transmission
Aerial input: 75 ohm coaxial (IEC75)•
DVB: DVB Terrestrial, DVB-T MPEG4•
TV system: DVB COFDM 2K/8K; PAL I, •
B/G, D/K; SECAM B/G, D/K, L/L’
Video playback: NTSC, SECAM, PAL•
Tuner Bands: Hyperband, S-channel, UHF, •
VHF
Remote control
Type: PF01E 09B•
Batteries: 2 x AAA (LR03 type)•
Power
36
Downloaded From TV-Manual.com Manuals
EN
Mains power: 220 -240V, 50Hz•
Standby power: < 0.3 W•
Ambient temperature: 5 to 40 degrees •
Celsius
Page 39
Supported TV mounts
Product specification
To mount the TV, purchase a Philips TV mount
or a VESA-compatible TV mount. To prevent
damage to cables and connectors, be sure to
leave a clearance of at least 2.2 inches or 5.5cm
from the back of the TV.
Warning
Follow all instructions provided with the TV •
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
TV screen
size
Required
pitch (mm)
Required
mounting bolts
(inches)
32 200 x 200 4 x M6 (≤ 10 mm)
42 300 x 200 4 x M6 (≤ 10 mm)
47 400 x 300 4 x M8 (≤ 12 mm)
Design and specifications are subject to change
without notice.
32PFL3605H/32PFL3205H/32PFL3405H
Without TV stand•
Dimension (WxHxD): 795.6 •
x 508.3 x 93 (mm)
Weight: 8.3 kg•
With TV stand•
Dimension (WxHxD): 795.6 •
x 556.6 x 220.8 (mm)
Weight: 9.4 kg•
42PFL3605H/42PFL3405H
Without TV stand•
Dimension (WxHxD): 1018.5 •
x 635.7 x 83 (mm)
Weight: 11.5 kg•
With TV stand•
Dimension (WxHxD): 1018.5 •
x 683 x 235.8 (mm)
Weight: 12.8 kg•
47PFL3605H
Without TV stand•
Dimension (WxHxD): 1129.8 •
x 700.7 x 83 (mm)
Weight: 16.8 kg•
With TV stand•
Dimension (WxHxD): 1129.8 •
x 746.4 x 270.1 (mm)
Weight: 19.8 kg•
English
Downloaded From TV-Manual.com Manuals
EN
37
Page 40
9 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
General TV issues
Cannot remove ‘e-sticker’ banner displayed on
the TV.
To remove the logos and images, set the •
location of your TV to home.
1. Press
2. Select [Setup] > [Installation] >
[Preferences] > [Location].
3. Select [Home] and press OK.
MENU.
The TV does not switch on:
Disconnect the power cable from the •
power outlet. Wait for one minute then
reconnect it.
Check that the power cable is securely •
connected.
The remote control is not working properly:
Check that the remote control batteries •
are correctly inser ted according to the
+/- orientation.
Replace the remote control batteries if •
they are flat or weak.
Clean the remote control and TV sensor •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the •
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock the TV lock
feature
Enter ‘8888’. •
The TV menu is in the wrong language.
Change the TV menu to your preferred •
language.
When turning the TV on / off / to standby, you
hear a creaking sound from the TV chassis:
No action is required. The creaking sound •
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
TV channel issues
Previously installed channels do not appear in
the channel list:
Check that the correct channel list is •
selected.
No digital channels were found during the
installation:
Check that the TV supports DVB-T, •
DVB-T Lite or DVB-C in your country.
Some channels are not automatically installed
on my TV:
During installation, make sure that •
you select the countr y where you are
installing the TV (see ‘Step 2 Select your
country’ on page 27).
38
Downloaded From TV-Manual.com Manuals
EN
Page 41
Picture issues
Sound issues
The TV is on, but there is no picture:
Check that the antenna is properly •
connected to the TV.
Check that the correct device is selected •
as the T V source.
There is sound but no picture:
Check that the picture settings are •
correctly set.
There is poor TV reception from an antenna
connection:
Check that the antenna is properly •
connected to the TV.
Loudspeakers, unearthed audio devices, •
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor, •
fine tune this channel.
There is poor picture quality from connected
devices:
Check that the devices are connected •
properly.
Check that the picture settings are •
correctly set.
The TV did not save your picture settings:
Check that the TV location is set to the •
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
Try using a different picture format. •
The picture position is incorrect:
Picture signals from some devices may •
not fit the screen correctly. Check the
signal output of the device.
There is a picture but sound quality is poor:
English
Note
If no audio signal is detected, the TV •
automatically switches the audio output off
— this does not indicate malfunction.
Check that all cables are properly •
connected.
Check that the volume is not set to 0. •
Check that the sound is not muted. •
There is a picture but the sound quality is
poor:
Check that the sound settings are •
correctly set.
There is a picture but sound comes from one
speaker only:
Verify that sound balance is set to the •
centre.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP •
(High-bandwidth Digital Content
Protection) support can delay the time
taken for a TV to display content from a
HDMI device.
If the TV does not recognise the HDMI •
device and no picture is displayed, try
switching the source from one device to
another and back again.
If there are intermittent sound •
disruptions, check that output settings
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter •
or HDMI-to-DVI cable, check that an
additional audio cable is connected to
AUDIO IN
(mini-jack only).
Downloaded From TV-Manual.com Manuals
EN
39
Page 42
Computer connection issues
The computer display on the TV is not stable:
Check that your PC uses the supported •
resolution and refresh rate.
Set the TV picture format to unscaled. •
Contact us
If you cannot resolve your problem, refer to
the FAQs for this product at
www.philips.com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your countr y as
listed in the Addendum.
Warning
Do not attempt to repair the product yourself. •
This may cause severe injur y, irreparable
damage to your product or void your
warranty.
Note
Make a note of your TV model and serial •
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
40
Downloaded From TV-Manual.com Manuals
EN
Page 43
10 Index
A
analogue
fine-tune 28
antenna 30
B
back connectors 30
batteries 36, 5
bracket for wall mount 37
C
CAM 34
care 5
channel decoder 26
channel grid 9
channels
favourites list 16
fine-tune 28
grid 9
install
automatic 27
manual 28
list 16
lock 20
rename 29
reorder / rearrange 29
switch 9
test reception (digital channels) 29
troubleshooting 38
tune 28
update 17
child lock
lock channels 20
lock connected devices 20
PIN code 20
ratings lock 21
clock
display 18
set 18
common interface 34
computer
connect 40, 33
display resolution 36
Conditional Access Module 34
connect
antenna 30
PC 40, 33
connectors
back connectors 30
HDMI 39, 30
overview 30
side connectors 32
USB 22
content ratings 21
country 27
D
daylight saving 19
decoder 26
default settings 26
demo 26
devices 10
devices
add to home menu 11
connect 30
remove 11
rename 11
watch 10
digital channel
subtitles 22
test reception 29
digital radio 24, 27
English
Downloaded From TV-Manual.com Manuals
EN
41
Page 44
digital services
CAM 34
teletext 16, 10, 15
disconnect USB 24
display
resolution 36
dispose 5
E
EasyLink
disable 35
enable 35
one-touch play 35
one-touch standby 35
system audio control 35
eco-green 6
end of life 5
energy efficiency 6
environmental care 5
e-sticker 24
F
factory settings 25
favourites list
add to list 17
create list 16
view list 16
fine-tune channels 27
G
green 6
L
language
menu 26
subtitle 21
troubleshoot 38
list
favourites list 16
location
country 26
home or shop 24
lock
Kensington lock 35
lock channels 20
lock connected devices 20
PIN code 20
ratings lock 20
M
menu
language 26
main menu 11
teletext 15
universal access 15
MHEG teletext 10
MPEG artifact reduction 12
multimedia 36
music
digital radio 23
USB 23
with slideshow 23
mute TV speakers 34
H
HDMI 39, 31, 29
hearing impaired 15
home mode 24
I
install channels
automatic 26
manual 27
K
Kensington lock 35
42
Downloaded From TV-Manual.com Manuals
EN
O
OAD 24
on timer 19, 19
one-touch play 34
one-touch standby 34
P
parental rating 20
Page 45
PC
connect 32, 39
resolution 36
picture format
change 13
troubleshooting 38
picture settings 12
PIN code 20
pixel plus link 24
power 36
power consumption 36, 6
preferences 24
product specifications 36
over the air download 24
update 24
version 24
sound settings 14
specifications 36
standby 9
subpages in teletext 15
subtitles
language 21
on analogue channel 21
on digital channel 21
switch
channels 9
on and off 9
source 10
R
radio 23
rearrange channels 28
reception 28, 38
recycle 5
register product 7
remote control
batteries 36, 5
overview 7
technical specifications 36
rename channels 28
reorder channels 28
resolution 36
restore default 25
S
safety 4
screen care 5
settings
picture 12
sound 14, 12
settings assistant 12
shop mode 24
side connectors 31
slideshow
view 22
with music 23
smart card 33
smart picture 12
smart settings 12 , 14
smart sound 14
software
Downloaded From TV-Manual.com Manuals
T
Table of Pages 16
technical specifications 36
teletext
features 15
menu 15
subpages 15
Table of Pages 16
Teletext 2.5 16
use 10
time zone 18
timer
on timer 19, 19
sleep timer 19
standby 19
transmission 36, 38
transporting 4
troubleshooting 38
TV lock
lock channels 20
lock connected devices 20
PIN code 20
ratings lock 20
TV overview 7
U
universal access menu 15
USB
disconnect USB 23
listen to music 23
update software 24
EN
English
43
Page 46
view photos 22
V
video format
technical specifications 36
volume
adjust 10
automatic levelling 14
delta 14
mute 10, 34
W
wall mount 4, 37
44
Downloaded From TV-Manual.com Manuals
EN
Page 47
45 EN
Downloaded From TV-Manual.com Manuals
Page 48
Downloaded From TV-Manual.com Manuals
46EN
Page 49
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Downloaded From TV-Manual.com Manuals
Loading...