Philips 328M6FE1T, 328M6, 328M6FJMB User Manual

328M6

www.philips.com/welcome

EN User manual 1

Customer care and warranty 18

Troubleshooting & FAQs 22

Table of Contents

1. Important ....................................... 1

1.1 Safety precautions and

maintenance .................................. 1

1.2 Notational Descriptions ............. 3

1.3 Disposal of product and packing

material ........................................... 3

2. Setting up the monitor ............... 5

2.1 Installation ..................................... 5

2.2 Operating the monitor ................6

2.3 Remove the Base Assembly for

VESA Mounting.............................8

3. Image Optimization .................... 9

3.1 SmartImage ...................................9

3.2 SmartContrast ..............................10

4. Ambiglow ...................................... 11

5. FreeSync .......................................12

6. Technical Specications ........... 13

6.1 Resolution & Preset Modes .....16

7. Power Management .................. 17

8. Customer care and warranty ... 18

8.1 Philips’ Flat Panel Monitors

Pixel Defect Policy ...................... 18

8.2 Customer Care & Warranty .......21

9. Troubleshooting & FAQs .......... 22

9.1 Troubleshooting .........................22

9.2 General FAQs .............................. 23

1. Important

1. Important

This electronic user’s guide is intended
for anyone who uses the Philips
monitor. Take time to read this user's
manual before you use your monitor.
It contains important information and
notes regarding the operation of your
monitor.

The Philips guarantee applies provided
the product is handled properly for
its intended use, in accordance with
its operating instructions and upon
presentation of the original invoice
or cash receipt, indicating the date of
purchase, dealer’s name and model and
production number of the product.

1.1 Safety precautions and maintenance

Warnings

Use of controls, adjustments or
procedures other than those specified
in this documentation may result in
exposure to shock, electrical hazards
and/or mechanical hazards.

Read and follow these instructions
when connecting and using your
computer monitor.

Operation

• Please keep the monitor out of

direct sunlight, very strong bright
lights and away from any other heat
source. Lengthy exposure to this
type of environment may result in
discoloration and damage to the
monitor.

• Remove any object that could fall

into ventilation holes or prevent
proper cooling of the monitor’s
electronics.

• Do not block the ventilation holes

on the cabinet.

• When positioning the monitor, make
sure the power plug and outlet are
easily accessible.

• If turning off the monitor by
detaching the power cable or DC
power cord, wait for 6 seconds
before attaching the power cable or
DC power cord for normal operation.

• Please use approved power cord
provided by Philips at all times. If
your power cord is missing, please
contact your local service center.
(Please refer to Customer Care
Consumer Information Center)

• Do not subject the monitor to severe
vibration or high impact conditions
during operation.

• Do not knock or drop the monitor
during operation or transportation.

Maintenance

• To protect your monitor from
possible damage, do not put
excessive pressure on the monitor
panel. When moving your monitor,
grasp the frame to lift; do not lift
the monitor by placing your hand or
fingers on the monitor panel.

• Unplug the monitor if you are not
going to use it for an extensive
period of time.

• Unplug the monitor if you need to
clean it with a slightly damp cloth.
The screen may be wiped with a
dry cloth when the power is off.
However, never use organic solvent,
such as, alcohol, or ammonia-based
liquids to clean your monitor.

• To avoid the risk of shock or
permanent damage to the set, do
not expose the monitor to dust,
rain, water, or excessive moisture
environment.

• If your monitor gets wet, wipe it with
dry cloth as soon as possible.

1

1. Important

• If foreign substance or water gets in
your monitor, please turn the power
off immediately and disconnect
the power cord. Then, remove the
foreign substance or water, and
send it to the maintenance center.

• Do not store or use the monitor in
locations exposed to heat, direct
sunlight or extreme cold.

• In order to maintain the best
performance of your monitor and
use it for a longer lifetime, please
use the monitor in a location
that falls within the following
temperature and humidity ranges.

• Temperature: 0-40°C 32-104°F

• Humidity: 20-80% RH

Important information for Burn-in/
Ghost image

• Always activate a moving screen
saver program when you leave
your monitor unattended. Always
activate a periodic screen refresh
application if your monitor will
display unchanging static content.
Uninterrupted display of still or
static images over an extended
period may cause “burn in”, also
known as “after-imaging” or “ghost
imaging”, on your screen.

• “Burn-in”, “after-imaging”, or
“ghost imaging” is a well-known
phenomenon in LCD panel
technology. In most cases, the
“burned in” or “after-imaging” or
“ghost imaging” will disappear
gradually over a period of time after
the power has been switched off.

Warning

Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after­image” or “ghost image” symptoms
that will not disappear and cannot be

repaired. The damage mentioned above
is not covered under your warranty.

Service

• The casing cover should be opened
only by qualified service personnel.

• If there is any need for any
document for repair or integration,
please contact with your local
service center. (please refer to the
chapter of “Consumer Information
Center”)

• For transportation information,
please refer to “Technical
Specifications”.

• Do not leave your monitor in a car/
trunk under direct sun light.

Note

Consult a service technician if the
monitor does not operate normally, or
you are not sure what procedure to take
when the operating instructions given in
this manual have been followed.

2

1. Important

1.2 Notational Descriptions

The following subsections describe
notational conventions used in this
document.

Notes, Cautions and Warnings

Throughout this guide, blocks of text
may be accompanied by an icon and
printed in bold or italic type. These
blocks contain notes, cautions or
warnings. They are used as follows:

1.3 Disposal of product and

packing material

Waste Electrical and Electronic
Equipment-WEEE

Note

This icon indicates important
information and tips that help you make
better use of your computer system.

Caution

This icon indicates information that
tells you how to avoid either potential
damage to hardware or loss of data.

Warning

This icon indicates the potential for
bodily harm and tells you how to avoid
the problem.

Some warnings may appear in alternate
formats and may not be accompanied
by an icon. In such cases, the specific
presentation of the warning is mandated
by the relevant regulatory authority.

This marking on the product or on
its packaging illustrates that, under
European Directive 2012/19/EU
governing used electrical and electronic
appliances, this product may not be
disposed of with normal household
waste. You are responsible for disposal
of this equipment through a designated
waste electrical and electronic
equipment collection. To determine the
locations for dropping off such waste
electrical and electronic, contact your
local government office, the waste
disposal organization that serves your
household or the store at which you
purchased the product.

Your new monitor contains materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the amount of
reusable materials and to minimize the
amount to be disposed of.

All redundant packing material has been
omitted. We have done our utmost to
make the packaging easily separable
into mono materials.

Please find out about the local
regulations on how to dispose of your
old monitor and packing from your sales
representative.

3

1. Important

Taking back/Recycling Information for
Customers

Philips establishes technically and
economically viable objectives
to optimize the environmental
performance of the organization's
product, service and activities.

From the planning, design and
production stages, Philips emphasizes
the important of making products that
can easily be recycled. At Philips,
end-of-life management primarily
entails participation in national take­back initiatives and recycling programs
whenever possible, preferably in
cooperation with competitors,
which recycle all materials (products
and related packaging material) in
accordance with all Environmental
Laws and taking back program with the
contractor company.

Your display is manufactured with high
quality materials and components
which can be recycled and reused.

To learn more about our recycling
program please visit:

http://www.philips.com/a-w/about/
sustainability.html

4

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents

Register your product and get support at

www.philips.com/welcome

©

2

保留备用

0

1

7

K

o

n

i

n

k

l

i

j

k

e

P

h

i

l

i

p

s

N

.

V

.

A

l

l

r

i

g

h

t

s

r

e

s

e

r

v

e

d

.

Monitor

User’s Manual

使用产品前请阅读使用说明

www.philips.com/welcome

Philips and the Philips’ Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
and are used under license from Koninklijke
Philips N.V.

U

n

a

u

t

h

o

r

i

z

e

d

d

u

p

l

i

c

a

t

i

* CD

Install base stand

1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.

328M6

2. Hold the stand with both hands.
Gently attach the stand to the VESA

Contents:

User’s Manual
Monitor drivers

n

o

i

s

r

e

V

.

a

n

i

h

C

n

i

d

e

t

n

i

r

p

d

n

a

e

d
a

M

.

s

w

a

l

e

l

b

a

o

c

i

n

l

p

i

s

p

a

a

f

v

i

o

o

l

n

a

t

o

i

mount area until the latch locks the
stand.

AC/DC Adapter

* VGA

Audio cable

* DP cable

* HDMI

* Different according to region

Note

Use only AC/DC adapter model: Philips
ADPC2090

Warning:

This product is curve design, when
attach / detach the base, place the
protective material under the monitor
and do not press down the monitor to
avoid the damage.

5

2. Setting up the monitor

Connecting to your computer

3

7 531

8

2

6 4

2.0

P2 P1

8

7

6

5

4

1

AC/DC power input

2

Earphone jack

3

Audio input

4

VGA input

5

Display port 1(Support 1.1&1.2) input

6

Display port 2(Support 1.1&1.2) input

7

HDMI 2.0 input

8

HDMI input

9

Kensington anti-theft lock

9

1

2

Connect to PC

1. Connect the power cord to the back
of the monitor firmly.

2. Turn off your computer and unplug
its power cable.

3. Connect the monitor signal cable to
the video connector on the back of
your computer.

4. Plug the power cord of your
computer and your monitor into a
nearby outlet.

5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.

2.2 Operating the monitor

Description of the control buttons

Press more than 3 seconds
to switch display power
OFF. Press to switch display
power ON.

Access the OSD menu
Confirm the OSD
adjustment.

SmartSize: Change display
format.

Adjust the OSD menu.

Change the signal input
source

Adjust the OSD menu.

SmartImage: There are
multiple selections: FPS,
Racing, RTS, Gamer 1,Gamer
2, LowBlue Mode,Off.

Return to previous OSD
level.

.

6

2. Setting up the monitor

Description of the On Screen Display

 













What is On-Screen Display (OSD)?

On-Screen Display (OSD) is a feature in
all Philips LCD monitors. It allows an end
user to adjust screen performance or
select functions of the monitors directly
through an on-screen instruction
window. A user friendly on screen
display interface is shown as below:





Basic and simple instruction on the
control keys

To access the OSD menu on this Philips
Display simply use the single toggle
button at the bottom of the Display
bezel. The single button operates like
a joystick. To move the cursor, simply
toggle the button in four directions.
Press the button to select desired
option.

The OSD Menu

Below is an overall view of the structure
of the On-Screen Display. You can use
this as a reference when you want to
work your way around the different
adjustments later on.

Main menu Sub menu

Ambiglow

LowBlue
Mode

Input

Picture

SmartSize

Audio

Color

Language

OSD Settings

Setup

O
Auto
SmartBiasLight

On

O

VGA
HDMI 1.4
HDMI 2.0
DisplayPort 1
DisplayPort 2
Brightness

Contrast

Sharpness

SmartResponse

SmartContrast

SmartFrame

Gamma

Pixel Orbiting

Over Scan

Panel Size

1:1

Aspect

Volume

Stand-Alone

Mute

Audio Source

Color Temperature

sRGB

User Dene

English, Deutsch, Español, Ελληνική, Français, Italiano, Maryar，
Nederlands, Português, Português do Brasil，Polski，Русский ,
Svenska，Suomi，Türkçe，Čeština，Українська, 简体中文,

繁體中文，日本語，한국어

Horizontal

Vertical

Transparency

OSD Time Out

Auto

H.Position

V.Position

Phase

Clock

Resolution
Notication

DisplayPort1

DisplayPort2

Reset

Information

Bright, Brighter, Brightest
Bright, Brighter, Brightest

1,2,3

0~100

0~100

0~100

O, Fast, Faster, Fastest

On, O

On, O

Size: 1, 2, 3, 4, 5, 6, 7

Brightness: 0~100

Contrast: 0~100

H. position

V. position

1.8, 2.0, 2.2, 2.4, 2.6

On, O

On, O
17'': (5:4)
19'': (5:4)
19''W: (16:10)
22''W: (16:10)

18.5W'': (16:9)

19.5''W: (16:9)
20''W: (16:9)

21.5''W: (16:9)
23''W: (16:9)
24''W: (16:9)
27''W: (16:9)

31.5"W(16:9)

0~100

On, O

On, O

Audio In, HDMI 1.4,HDMI 2.0,
DisplayPort 1, DisplayPort 2

5000K, 6500K, 7500K,
8200K, 9300K, 11500K

Red: 0~100

Green: 0~100

Blue: 0~100

0~100

0~100

O, 1, 2, 3, 4

5s, 10s, 20s, 30s, 60s

0~100

0~100

0~100

0~100

On, O

1.1, 1.2

1.1, 1.2

Yes, No

7