Philips 30PW9100D, 26PW9100D, 26PW9100D-37B, 30PW9100D-37B, 30PW9110D Connecting Manual

Component Video
Input

Provides superior picture
quality by separating the
green, blue and red
luminance signals. Typically
used with red/white
audio cables.

HDMI

High-Definition
Interface
uncompressed,
audio/video
HDMI

provides the
connection. Please use a
certified HDMI cable

Best Better Good

Basic Basic

RF

Provides a basic
connection
for antenna or cable.
Provides both audio
and video.

Connection Basics

Composite Audio/Video

Separate video (yellow) and
audio (red/white) cables that
provide a basic connection from
the cable box and other devices.
Note : The color of audio inputs
may differ, e.g. red/white or
red/black.

S-Video

Supplies a better picture
than RF and Composite
connections. Used with
red/white audio cables.

1

Set-Top Box to TV

Back of Cable Box

Cable Signal IN
from Cable Company

TO

TV/VCR

CABLE

IN

IR

USB

DVD-D OUT

AUDIO IN

SPDIF

VIDEO

IN

OUT

S-VIDEO

R L

AUDIO OUT

TV

PASSCARD

Y Pb Pr

OPTICAL

SPDIF

TV

HDMI Input

75 ? Input

75 ?

ABA

B

Other Possible
Connections

HDMI

Note: In some cases,

cable box will automati-

cally tune to channel 3

or 4. Just change

channels until picture

appears.

Component
Video

Refer to panel 2.

4

Video Camera/Games Console to TV

Composite Audio/Video

Other Possible Connections

Note: for mono devices,

connect only white audio
cable from device’s audio
output to white audio input
on the side of TV.

Connect audio cables
(red/white) from audio
outputs on device to
audio inputs (red/white)
on the side of TV.

BA

Connect the video
cable (yellow) from
the video output on
camera (or other
device) to the video
input (yellow)
located on the side
of TV.

Press PLAY on the
device to verify
connection.

DC

Turn on TV and the
device. Press CH+ or
CH- on the remote
control until FRONT/
SIDE appears on TV
screen.

S-Video

Refer to panel 3.

VIDEO

S-VIDEO

AUDIO

L

R

S-VIDEO

VIDEO

AUDIO

LEFT RIGHT

CH+ and CH- Buttons

Remote
Cont

rol

Video Camera

TV

TV Side Jack Panel

Video Camera Jack Panel

How to

make the best connection

Use this guide to achieve the optimal connection for each of your components.
Alte

rnative connections are also provided.

RF Cable

Use second RF cable to
connect the cable box
to the TV input (75 ?).

BA

Connect RF cable
from wall to input at
the back of the cable
box.

C

Set output switch
on set-top box to
CH 3 or 4 and tune
TV to same channel.

B

Connect cable box
to TV using HDMI
cable.

A

Connect RF cable

fro

m wall to input at
back of the cable
box.

C

Set output switch
on set-top box to
CH 3 or 4 and
tune TV to same
channel.

A

B

C

2005 © Koninklijke Philips Electronics N.V.
All

rights reserved.

3139

125 34972

Need more help?

User manual:

Check the user ma

nual that came with your TV.

Online help

: www.p4c.philips.com or

www.usasupport.philips.com

Note: This connection gives
mono sound. For stereo
sound use also composite
audio/video connection
(Refer to panel 3).

OR

Multimedia

provides an

all-digital

connection.

ultimate

HUG_30PW9110D.pdf 2005-06-30 11:00:00 AMHUG_30PW9110D.pdf 2005-06-30 11:00:00 AM

2

DVD Player or DVD Recorder to TV

HDMI Input

TV

Back of DVD Player/Recorder

HDMI

Other Possible Connections

Component Video Input

Turn on TV and DVD
player/DVD recorder.
Press CH+ or CH- on
remote control to tune
to the video supplied
by HDMI.

B

A

Insert Component
Video connectors into
their corresponding
jacks on both DVD
player/DVD recorder
and TV (sometimes
labeled Y, Pb and Pr).

Connect red/white
audio cables into the
audio output jacks
on DVD player/DVD
recorder and audio
AV inputs on TV.

B

Turn on TV and DVD
player/DVD recorder.
Press CH+ or CH­on remote control
until CVI appears on
TV screen.

C

Insert a pre-recorded
DVD into DVD player/
DVD recorder and
press PLAY to verify
correct connection.

D

A

Connect DVD player/
DVD recorder to the
TV using HDMI cable.

C

Insert a pre­recorded DVD into
DVD player/ DVD
recorder and press
PLAY to verify
correct connection.

S-Video

Refer to panel 3.

Composite
Audio/Video

Refer to panel 3.

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

L/Mono

VIDEO

COMPONEN

T VIDEO INPUT

TV

Back of DVD Player/Recorder

CH+ and CH- Buttons

Remote
Control

TV Jack Panel

S-VIDEO

OUT

OUT

OUT

L

R

AUDIO

VIDEO

COM

P VIDEO

Y

Pb

Pr

A

B

C

3

VCR to TV

S-Video

Composite Audio/Video

Connect audio cables
(red/white) to audio AV
inputs on back of TV and
Audio outputs on back
of VCR.

B

Connect the video
cable (yellow) to the
VIDEO AV input on
back of TV and the
corresponding video
output on back
of VCR.

A

Connect audio cables
(red/white) to audio
AV inputs on back of
TV and the corre

­sponding audio
outputs (L & R) on
back of VCR.

B

Turn on the TV and
VCR. Press CH+ or
CH- on remote
control until AV1 or
AV2 appears on TV
screen.

C

Insert pre-recorded
videotape into VCR
and press PLAY to
verify correct con

-

nection.

D

Insert pre-recorded
videotape into VCR and
press PLAY to verify
correct connection.

DC

Turn on TV and VCR.
Press CH+ or CH- on
remote control until
AV1 or AV2 appears
on TV screen.

TV Jack Panel

Back of VCR

CH+ and CH- Buttons

B

TV

TV

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

L/Mono

VIDEO

COMPONEN

T VIDEO INPUT

AUDIO OUT

L R

S-VIDEO

OUT

ANT/CABLE

OUT

VIDEO
OUT

A

CH+ and CH- Buttons

Remote
Control

C

TV Jack Panel

Back of VCR

B

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

L/Mono

VIDEO

COMPONEN

T VIDEO INPUT

AUDIO OUT

R L

S-VIDEO

OUT

ANT/CABLE

OUT

VIDEO
OUT

CH+ and CH- Buttons

Remote
Control

C

CH+ and CH- Buttons

Remote
Control

B

A

Connect S-Video
cable to S-Video input
on back of TV and
S-Video output on
back of VCR.

Note: When using CVI, it is best
not to connect a video signal to
the other AV input on the TV.

A

A

S-VIDEO

OUT

OUT

OUT

L

R

AUDIO

VIDEO

COM

P VIDEO

Y

Pb

Pr

Note: When you connect S-Video and AV2 at the same time,
you can only hear sound coming from S-Video .

OR

OR