Philips 30MF200V-17B User Manual

Return your Product Registration Card today

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

to get the very most from your purchase.

Registering your model with MAGNAVOX makes you eligible for all of the valuable
benefits listed below, so don't miss out. Complete and return your Product Registration
Card at once to ensure:

* Proof of Purchase

Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain
warranty service.

* Product Safety
Notification

By registering your product
you’ll receive notification ­directly from the
manufacturer - in the rare
case of a product recall or
safety defect.

Congratulations on your purchase, and
welcome to the “family!”

Dear MAGNAVOX

Thank you for your confidence in MAGNAVOX.
You’ve selected one of the best-built, best-backed
products available today.We’ll do everything in
our power to keep you happy with your
purchase for many years to come.

As a member of the MAGNAVOX “family,”
you’re entitled to protection by one of the most
comprehensive warranties and outstanding
service networks in the industry.
What’s more, your purchase guarantees you’ll
receive all the information and special offers for
which you qualify, plus easy access to accessories
from our convenient home shopping
network.

Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.

All of this is our way of saying welcome - and
thanks for investing in a MAGNAVOX product.

product owner:

* Additional Benefits
of Product Ownership

Registering your product
guarantees that you’ll receive
all of the privileges to which
you’re entitled, including
special money-saving offers.

Know these

safety symbols

This “bolt of lightning” indicates

t

uninsulated material within your unit
may cause an electrical shock. For the safety
of everyone in your household, please do not
remove product covering.

The “exclamation point” calls attention

s

to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.

WARNING:To reduce the risk of fire or

electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.

CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.

ATTENTION :Pour éviter les choc
électriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.

P.S. To get the most from your

MAGNAVOX purchase, be sure to
complete and return your Product
Registration Card at once.

Enter below the Serial No., which is

For Customer Use

located on the rear of the cabinet. Retain
this information for future reference.

Model No. __________________________
Serial No. __________________________

Visit our World Wide Web Site at http://www.magnavox.com

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong.The wide blade or third prong are
provided for your safety.When the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.

10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories specified by the
manufacturer.

12. Use only with a cart, stand,tripod, bracket, or

13. Unplug this apparatus during lightning storms or when unused

14. Refer all servicing to qualified service personnel. Servicing is

15. This product may contain lead or mercury. Disposal of these

16. Damage Requiring Service - The appliance should be

A. The power supply cord or the plug has been damaged; or

EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE (NEC)

table specified by the manufacturer, or sold with

the apparatus.When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury
from tip-over.

for long periods of time.

required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally,
or has been dropped.

materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.

serviced by qualified service personnel when:

GROUND CLAMP

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with

recommended international global safety standards for tilt and
stability properties of its cabinets design.

• Do not compromise these design standards by applying
excessive pull force to the front,or top, of the cabinet
which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be

mounted to a wall or ceiling only as recommended by the
manufacturer.

19. Pow er Lines - An outdoor antenna should be located away

from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is

connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding of the mats and supporting structure grounding of
the lead-in wire to an antenna-discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes and requirements for the
grounding electrode. See Figure below.

21. Objects and Liquid Entry - Care should be taken so that

objects do not fall and liquids are not spilled into the
enclosure through openings.
a) Warning:To reduce the risk of fire or electric shock, this
apparatus should not be exposed to rain or moisture and
objects filled with liquids, such as vases should not be placed
on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage

that may result in bodily injury, property damage, or damage
to the unit:

• Install all batteries correctly, with + and - alignment as
marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline,
etc.)

• Remove batteries when the unit is not used for a long time.

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT
(

NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40
of the NEC that provides guidelines for proper grounding and,in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H )

Help?

If this instruction manual does not give an answer or if ‘Tips’ do not solve your TV problem, you can call your
Local Magnavox Customer or Service Centre. See the supplied World-wide guarantee booklet.
Please, have the Model and Product number which you can find at the back of your television set or on the
packaging, ready, before calling the Magnavox helpline.

Model: 30MF200V/17 Product No:

Care of the screen

Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the
screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare
hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the
screen.When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like
chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible.Their long
time contact with the screen causes deformations and colour fading.

Preparation

& Wall mounting instructions/Table stand

How to mount the supplied stand and/or wall
mount bracket, see the supplied separate
leaflet. Make sure that the wall mount is being
fixed securely enough so that it meets safety
standards.
The weight of the TV (excl. packaging) is about
40 Lbs.

Note: Other (not supplied) stands are optional
accessories. Consult your dealer.

é Make sure that air can circulate freely through

the ventilation slots.

‘ Insert the power plug supplied into the mains

at the bottom of the TV and in the wall socket
having a mains voltage of 96-140V.
To prevent damaging the power (AC) cord
which could cause a fire or electric shock, do
not place the TV on the cord.

( Remote control: Insert the 2 batteries

supplied (Type R6-1,5V).

English

To prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed on or in the vicinity.Avoid heat,
direct sunlight and exposure to rain or water.
The equipment shall not be exposed to
dripping or splashing.

“ Insert the aerial plug firmly into the aerial

socket x at the bottom of the TV. For best
picture quality use the suppressor-aerial cable
supplied.

The batteries supplied do not contain the heavy
metals mercury and cadmium. Nevertheless in
many areas batteries may not be disposed of with
your household waste. Please ensure you dispose of
batteries according to local regulations.

§ Turn the TV on :Press the power switch B

at the right side of the TV.
An indicator on the front of the TV lights up.
Press the

-P+ keys or the B key on the

remote control.

1

To use the menus

& Press the MENU button on the remote control

to summon the main menu.At any moment you
can exit the menu by pressing the
button again.

é Use the cursor up/down to select Picture,

Sound, Features, Install or Mode.

“ Use the cursor in the right direction to select

the menu item.

TV menu

MENU

‘ Use the cursor up/down again to select the

control you want to select or to adjust.

( Press the OK button to activate.

Note: Items temporary not available or not relevant are
displayed in a light grey color and cannot be selected.

TV Menu

Picture π Brightness

Sound Color

Features Picture

Install Sharpness
Mode Tint

Color Tem

Picture

Brightness π

pπ

Color

Picture

Sharpness

Tint

Color Temp

Sound

Equalizer π 120 Hz

Balance 500 Hz

AVL 1500 Hz

Dolby Virtual

....

SAP

Sound

Picture menu:

Brightness: this changes picture brilliance.

•

•

Color: this changes the intensity of the color.

•

Picture: this improves the detail of the lightest parts of the

picture.

•

Sharpness: this changes the picture definition.
Tint

•

: this adjusts the picture to obtain natural skintones.

•

Color Temp: this changes the color rendering: Cool (bluer),

Normal (balanced) or Warm (redder).

Sound menu:

•

Equalizer: to adjust the sound tone (from bass 120 Hz to

treble 10 kHz).

•

Balance: this balances the sound on the left and right

speakers.

•

AVL (Automatic Volume Leveller): this is used to limit

increases in sound, especially on program change or
advertising slots.

Dolby Virtual

•

: simulates the surround sound experience from
2 speakers using Dolby Pro Logic* providing the listener with
the sensation of being surrounded by additional speakers.

SAP

•

: is an additional part of the stereo broadcast system;
Sent as a third audio channel, an SAP can be heard apart from
the current TV program sound.TV channels are free to use
SAP for any number of purposes. (Not available if not present
with a selected program).

Sound

•

: this allows you to toggle between

Stereo

or

Mono

sound (if stereo is present on a selected TV program).

Features

Timer π Time

AutoLock Start Time

Contrast+ Stop Time

DNR Channel No

PIP Activate

Features menu:

Timer,AutoLock

•

•

Contrast+

: automatic adjustment of the picture contrast

and PIP: see p. 10-13.

which permanently sets the darkest part of the picture to
black.

•

DNR: attenuates picture noise (snow) in difficult reception

conditions.

Display

2

How to search for TV channels

TV Menu

Picture Language

Sound Tuner Mode

Features Auto Program

Install π Channel edit

Mode

If you want to re-install your TV proceed as
follows:

& Press the MENU button on the remote

control.

é Use the cursor up/down to select Install.
“ Press the cursor right to enter the Install

menu.

Select the menu language

& Use the cursor left/right.
é Press the cursor up/down to select your

language.

Store TV channels

Auto Program

Select the Tuner mode

Allows you to change the TV’s signal input to cable,
antenna or auto mode.The auto mode setting
helps the TV determine the type of signal or
channels being received when auto program is
activated.

& Select Tuner Mode in the Install menu.
é Press the cursor right.

Note: It is recommended to keep the predefined

Automatic way of autoprogramming. In case of

difficulties in autoprogramming with the automatic
method, choose for Antenna or Cable whether
antenna or cable signals are present.

When

Auto is selected, the TV will

automatically detect whether or not cable
signal input is present.
When

Antenna is selected, the TV will detect

antenna signals and will search for all antenna
TV channels available in your local area.
When

Cable is selected, the TV will detect

cable signals and will search for all cable TV
channels available in your local area.

Editing of channels

Auto Program

Channel ..........

o

p π

œ

& Select Auto Program in the Install menu.

Note: All channels must be unlocked in order to
autoprogram. If requested, enter your code to unlock
all channels. (See TV, Features, AutoLock, p. 11.)

é Press the cursor right.

The autostore option label

“ Press the cursor right.
‘ The progress of autoprogramming is displayed.

Start ? appears.

Channel Edit

Channel π
Skipped On/Off

This feature allows you to edit or skip channels
from the channel list which have bad of weak
signals or channels which you do not watch often.

Note: Once a channel is skipped, you cannot select it
with the

-P+ button; you can only access the channel

with the digit buttons.

& Select Channel Edit in the Install menu.
é Press the cursor right to enter the channel list.
“ Select the channel you want to skip with the

cursor left/right.

‘ Press the cursor down.

Select

On or Off.

( Press the cursor up/down to select another

channel and repeat steps

§ Press the MENU button to return to the Install

“ - ‘.

menu.

Note:To add back channels to the list, repeat steps

& to ‘.

3

Use of the remote control RC4334

¬

+

-

V

+

-

P

VCR DVD TV SAT AMP

CCMENU

123

456

789

0

ACTIVE SLEEP

B

POWER

OK

®

®

®

®

AUTO AUTO

aM

Ò®‡π

º

†

INFO

TV PC

SURF

FORMAT

HD

SURR

SELECT

CONTROL

PIP

TIMER

SAP

-

AV+

Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.

Remark: in VGA mode only some buttons are valid.

VCR DVD TV SAT AMP

Press the SELECT button
repeatedly to select one of the
system modes in which the remote
control can be used. If no action is
being undertaken within 2 seconds,
the remote control returns to TV
mode.After an action in the
selected system mode the remote
control will remain in this mode for
60 seconds and will then return to
TV mode.

INFO Display information

To display the channel number, the
name (if it exists), the time, the sound
mode and the time remaining on the
timer.
Press again to display the ratings
selected.The volume level and the
smart control adjustments are then
displayed each time they are used.

®ºÒ‡π†

Audio and Video equipment buttons.

TV / PC

Press one of these buttons to switch
the television between TV or PC
mode.

SURR Sound mode

Incredible surround

With stereo transmission, and when
Incredible surround is selected, it
seems as though the loudspeakers
are spread further apart from one
another.

Virtual Dolby Surround

Optimal with Dolby surround *
signals. Enables you to experience the
effect of Dolby Surround Pro Logic,
reproducing a rear sound effect. See
Sound menu, Dolby Virtual p. 2.

Note:You can make the same selection in
the Sound menu, Dolby Virtual, p. 2.

HD Press this button to use the

remote control directly in the HD
mode for HD devices (eg. Set Top
box).
Press 1x for
press 2x for

* Manufactured under license from Dolby Laboratories.
‘Dolby’‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories.

HD-A mode,
HD-D mode.

POWER B

Press to turn the TV on or off.

The TV is never powered off completely
unless it is physically unplugged.

OK Press this button to display the

program list or to activate your
choice or to confirm when in the
menus.

MENU Main menu on/off. See p. 2.

CC Closed Caption

On/Off/On during mute

V To adjust the volume.

¬ Interrupt the sound or restore it.

P Channel selection

To browse through the TV channels
or sources stored.

0/9 Digit buttons

To select a TV channel.
For a two digit program number,
enter the second digit before the
dash disappears.To switch
immediately to a selected one digit
TV channel, keep the digit button
pressed a bit longer.

AV+ Keep this button pressed and

then press repeatedly to select
(CVBS), CVI (YPbPr 1Fh), AV 2,

REAR or TV channels when in TV

mode, according to where you
connected the accessory devices
(p. 9).

-To type the digital separator for
digital channels.

SLEEP TIMER

To select the length of time before
the set automatically turns off (from
15 to 240 minutes).

PIP When in VGA or HDMI Mode,

pressing the

PIP button will bring

up a smaller second window within
your main screen enabling you to
watch a TV channel and a picture
from a device connected to
the same time.

AV1

AV3 ,at

4

POWER

B

VCR DVD TV SAT AMP

INFO

SELECT

Ò®‡π

TV PC

SURF

SURR

®

®

OK

®

º

†

HD

FORMAT

®

CCMENU

SURF

With this feature you can easily switch between different TV channels/
sources that currently interest you.
Press this button to select the previously viewed TV channel or source in
case of a Two channel surf, or to select the surf ring in case of a Nine
channel surf.
In case of a Nine channel surf, a list appears at the right side of the screen.
On top, the most recently channel is displayed. The puck is on the channel
number or source currently viewed.
Press the

SURF button to turn to the next channel or source in the list or

press cursor up/down to immediately select the desired TV channel or
source of the list.
To add a new channel or source to the 9 channels list: tune to the channel
or source you wish to add.
Press the

SURF button. Press the cursor right to add.

If there are already nine channels/sources in the list, the one at the bottom
of the list will be removed.
To r emove a channel or source: select the channel number you want to
remove.
Press the
Press the

SURF button. Press the cursor right to remove.
OK button or wait for the time out to dismiss the Surf display.

¬

+

P

-

+

V

-

123

456

789

AV+

ACTIVE SLEEP

CONTROL

SAP

AUTO AUTO

-

0

PIP

TIMER

aM

FORMAT

Press this button to summon a list of available display formats for showing
video images in the traditional 4:3 proportions.
Press this button repeatedly or press the cursor left/right to select another
picture format: Super Zoom, 4:3, Zoom 14:9, Zoom 16:9, Subtitle Zoom,
Fullscreen or Widescreen.

Super Zoom 4:3

Subtitle Zoom

Fullscreen Widescreen

Zoom 14:9 Zoom 16:9

Super Zoom removes the black bars on the sides of 4:3 programs with
minimal distortion.

Note: in HDMI mode press the FORMAT button to switch between a 16:9 or
a Wide screen picture format.

SAP When you tune a channel where SAP (Second Audio Program) is

available, you can toggle between Main and

SAP. If not available only Main

can be selected.

ACTIVE CONTROL On/Off/On with Sensor

Optimizes the quality of the picture according to the quality of reception.

Ma Auto Sound/Picture

To select predefined picture and sound settings.
Personal refers to the personal preference settings selected in the sound
and picture menu.

Note:This Magnavox TV has been set at the factory to look best in bright store
environments which use fluorescent lighting.As your home will likely not be as well
lit as a store, we recommend you that you cycle through the various Smart picture
modes to find the one that best suits your own viewing conditions.

5

Buttons on top of the TV

MENU/OK - V + - P/CH +

S-VIDEOS-VIDEO

VIDEO INVIDEO IN

S•VHS

VHS

AUDIO AU DIO

VIDEO INVIDEO IN

S•VHS

AUDIO

VIDEO IN

L

L

R

AV1 (1Fh)

AV2

MON.OUT

AV3

L

R

VIDEO/AUDIO VIDEO/AUDIO

S-VIDEO

HDMI

VGA

Y/Pb/Pr (2Fh)

Pr

AUDIO

Pb Y

RLCVBS

x ANTENNA

AUDIO

Should your remote be lost or broken you can still
change some of the basic settings with the buttons
on top of your TV.

Press:

• the - V + button to adjust the volume;

• the

- P/CH + button to select the TV channels or

sources.

Press the

MENU/OK button to summon the main

menu without the remote control.
Use:

• the V

+ button and the - P/CH + button to

select menu items in the directions as shown;

• the

MENU/OK button to confirm your selection.

Press the
menu.

Camcorder, video games, headphone

Camera, Game or Camcorder

& Connect your camera, game or camcorder as shown.
é Connect to VIDEO 2 and AUDIO L 3 for mono

equipment. For stereo equipment also connect

AUDIO R 3.

S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the
1 and

Do not connect cable 1 and 2 at the same time. This
may cause picture distortion !

Headphone

& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to turn off the internal

loudspeakers of the TV.

The headphone impedance must be between 8 and 4000
Ohm.The headphone socket has a 3.5 mm jack.

MENU/OK button again to turn off the

S-VIDEO input

AUDIO inputs 3.

Rear connections

There is a wide range of audio and video devices that can be connected to your TV.The following
connection diagrams show you how to connect them to the TV.

AV1 can handle YPbPr and CVBS; AV2 CVBS and Y/C; AV3 HDMI and VGA - VGA can handle VGA, SVGA, XGA and

480p, 576p, 720p and 1080i.

6

Recorder (VCR-DVD+RW)

AV2 MON.OUT

VIDEO/AUDIO VIDEO/AUDIO

S-VIDEO

R

x ANTENNA

CABLE

RECORDER

IN OUT

4

3

AV2 MON.OUT

VIDEO/AUDIO VIDEO/AUDIO

x ANTENNA

S-VIDEO

R

RECORDER

CABLE

3

4

OUT IN

x

TV

AV1 (1Fh)

Pr

AUDIO

Pb Y

RLCVBS

VIDEO

L/Mono

AUDIO

1

VIDEO

L/Mono

AUDIO

DVD

2

Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display. Keep a minimum distance of 20” from the screen.

& Connect the RF Antenna or Cable TV cable 1

(eventually via an optional two-way signal splitter and/or
Cable TV convertor box) to the
recorder.

é Connect another RF cable 2 from the output OUT of

your recorder to the TV’s input x

“ Connect the supplied adapter cable mini-jack to cinch

3 to the

VIDEO/AUDIO input jack of AV 2.

If your recorder has an S-VHS video jack:

For improved picture quality, connect an S-video cable
4 with the

S-VIDEO input.

S-VHS does not provide audio, so the mini-jack to cinch
cable must still be connected to provide sound.

RF IN socket of your

ANTENNA jack.

Recorder and other A/V devices

& Connect the RF Antenna or Cable TV cable 1 to the

RF IN socket of your other A/V device.

é Connect the supplied adapter cable mini-jack to cinch

2 to the

VIDEO/AUDIO input jack of AV 2.

“ Connect the RF output of the A/V device to the RF

input on the recorder 3.

‘ Connect another RF cable 4 from the output OUT of

your recorder to the TV’s input x

If your recorder has an S-VHS video jack: see above.

The

MON. OUT

connector can be used for a daisy
chaining or to record programs from your TV. Only when
a recorder is connected to
record a program from other devices connected to the
TV.
See Record with your recorder, p. 15.

Devices with Component Video Output Connectors (YPbPr)

& Connect the three separate component video cables 1 to the

device having component video outputs (YPbPr), such as DVD­players, laser-disc players, videogame players, satellite receivers, or
other equipment and to the

é Connect the audio cable 2 to the device’sAUDIO L and R jacks

and to the

“ For reproduction of CVI (Component Video Input) also connect to

the

L and R audio YPbPr jacks of AV1.

CVBS jack of AV 1. See the handbook of your DVD player.

Y, Pb and Pr jacks of AV 1 on the TV.

Note: the labels for the component video sockets may differ depending on
the DVD player or the device connected.Although the abbreviations may
vary the letters B and R stand for blue and red component signals,
respectively, and Y indicates the luminance signal. Refer to the DVD
player’s or device’s instructions for use for definitions and connection
details.

MON. OUT

ANTENNA jack.

it is possible to

7

Devices with Progressive scan output

AV3

L

AUDIO

RHDMI

VGA

Y/Pb/Pr (2Fh)

1

DVD

2

1

2

HDMI

AV3

L

UADIO

R

VGA

Y/Pb/Pr (2Fh)

(e.g. a digital Set Top box, a video game console or

Progressive scan DVD player (480p, 576p, 720p or 1080i)

Connect the device with 2Fh YPbPr output to the VG A
connector 1 (with the supplied adapter cable VGA to
cinch) and to the
See also the manual of your High Definition device.

Note:This television is designed to accept high definition signal
standards 480p, 576p, 720p and 1080i as specified by the
Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of
differing output standards which may cause difficulties for the
television to properly display.

Warning: In case you notice scrolling images, wrong colors or no
colour, no picture, or even combinations of these on your screen,
check if the connections are done in the correct way or move
your digital device further away from your TV.

L and R AUDIO jacks 2 of AV3.

Connect your computer

You may connect your computer to the VGA connector of

AV3 or to the HDMI connector (see further).

& Connect one end of a VGA cable 1 to the video card

of the computer and the other end to the

1 connector at the bottom of the TV.

2Fh

VGA

Y/Pb/Pr

Fix the connectors firmly with the screws on the plug.

é In case of a Multimedia computer, connect the audio

cable 2 to the audio outputs of your Multimedia
computer and to the

AUDIO R (right) and L (left)

inputs.

The

VGA connector allows the following TV and

monitor display modes:

VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz

Note:

If possible, use the XGA1024x768@60Hz video mode to
obtain the best image quality for your LCD monitor.

8

AV3

L

AUDIO

R

HDMI

HDMI (High Definition Multimedia Interface) connector

789

0

ACTIVE SLEEP

AUTO AUTO

aM

CONTROL

PIP

TIMER

SAP

AV+

-

AV+

HDMI is the leading new standard for Digital High
Definition video and audio interconnection. Eg. with a Digital
Set top box, with HDMI-equipped devices like a DVD-R,AV
receiver...

Note:The HDMI connector does
analogue audio.

HDMI connector allows

The

- the following TV and monitor display modes:
EDTV 640/720 x 480p

720 x 576p
HDTV 1920 x1080i
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz

- uncompressed HD content

- encrypted or non encrypted signals.

Connect the digital HDMI output of your HD device (e.g. DVD player, Set Top Box..) to the HDMI
connector of your TV.

Notes:

-Proper working is only guaranteed with HDMI compliant consumer products.

-Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display;

- If the set is cold, there may be a small “flicker” when the set is turned on.This is normal, there is nothing wrong
with the set.

NOT support DVI devices with

To select connected devices

According to where you connected the accessory devices, press

•

AV+ followed by digit ‘1’ to select AV1

• AV+ followed by digit ‘2’ to select AV2

• AV+ followed by digit ‘3’ to select REAR for a device connected
to the rear or to the side (according to the type of TV you've
purchased), see p. 6

•

AV+ followed by digit ‘4’ to select HD-A for a HD-A device

connected to

•

AV+ followed by digit ‘4’ again to select HD-D for a HD-D device

connected to

•

AV+ followed by digit ‘5’ to select PC-A for a PC connected to
AV3 , see p. 8

Note:When in HD or PC mode, first press the

mode or to select

AV3 , see p. 8

AV3 , see p. 9

TV button to return to TV

AV1, AV2 or REAR again.

9

Features menu

Features

Timer Sleep

AutoLock π Time

Contrast+ Start Time

DNR

PIP

AutoLock

Block Channel Unrated

Change Code Blocking

Movie Rating

Block Options π

Lock HD No rating

Clear All
Block All

TV Rating

Timer

This menu lets you use the TV set as an alarm.

& Press the MENU button.
é With the cursor, select Features, then Timer.
“ Time: enter the current time with the digit

buttons.
Use the cursor left/right to select and to toggle
AM or PM.

‘ Start Time: enter the start time.
( Stop Time: enter the standby time.

§ Channel No: enter the number of the channel

for the wake-up alarm.

è Activate: the settings include:

•

Once for a single alarm;

•

Daily for each day,

•

Off to cancel.

!

Display:press the cursor right to select On or

Off, according to if you want to display the
current time on the TV screen or not.

ç Press the B button on the remote control to

put the TV set in standby. It will automatically
come on at the time programmed. If you leave
the TV set on, it will just change programs at
the time entered (and will go to standby mode
at the Stop Time).

Note: by combining the AutoLock and Timer
functions, you can restrict the period during which
the TV set is used, for example by your children.

AutoLock

The AutoLock feature receives and processes data
sent by broadcasters or other program providers
that contain program content advisories.When
programmed by the viewer, the TV can respond to
the content advisories and block program content
that may be found objectionable.
AutoLock allows parents to block out or “censor”
any channels they think children should not watch.
A channel blocked cannot be viewed until a correct
access code is used to unlock the channel for
viewing.

& Press the MENU button.
é With the cursor, select Features, then

AutoLock.

“ Press the cursor right to enter the AutoLock

menu.

‘ You are asked to enter your Access Code.

•Press 0,7,1,1 on the remote control.

Incorrect will appear on the screen.

•Press 0,7,1,1 on the remote control again.

New Code will appear on the screen.

• Enter a new 4-digit code using the number
buttons.
screen.

• Enter your new 4-digit code again.

Confirmed will flash on the screen briefly

and the highlight bar goes back to Block
Channel.

Confirm Code will appear on the

10

Important: you have forgotten your
Access code

Remember that 0,7,1,1 is the default
AutoLock™code. If your access code has
been changed by someone other than you (a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.

AutoLock features

Block channel

Select the TV channel you want to block. Press the cursor right to block the channel.
Repeat for any channels you want to block from viewing.

Lock HD

To block the devices connected to

Change Code

To change your block Access Code. Enter your current access code or the overriding code 0,7,11 and
enter a new personal access code.The previous code is erased and the new code is stored.

Clear all

To unblock all blocked channels and programming until the TV is shut off.When powered back on, all
previously blocked channels will be blocked again.

Block all

To block all channels and programming at once. In the
blocked channels.

Movie rating

Allows you to control access to individual movies bases on their MPAA ratings (Motion Picture
association of America).
Select a movie rating and press the cursor right to turn the rating

Note:When a rating is turned
be turned on or off.

AV3 .

OFF mode, you go back to the individual

ON or OFF.

ON, all higher ratings also will be turned on automatically. All Movie ratings can

G movies with a mild content, suitable for all ages
PG movies for which parental guidance is

recommended.
They may contain a few racy or violent scenes or
maybe some bad language

PG-13 movies for which parental guidance may be

recommended if under age 13

R restricted.The movies usually contain offensive

sex or bad language and may be unsuitable for
children under the age of 17.
Parental guidance or permission needed.

NC-17 even with parental permission, forbidden under

age 17.
More offensive sex, violence or bad language.

X movies which generally focus on sex, violence

and/or bad language.Also known as pornography.

11

TV rating

Allows you to toggle individual TV Ratings.
Select an age-based TV rating with the cursor up/down, and enter, if present, the list with content­based ratings with the cursor right, and select one content-based rating.
When Block all has been selected, all items in the contents-based list are blocked.
Press the cursor right again to turn the block on the rating

ON or OFF.

Note:When a rating is turned on, all higher ratings also will be turned on automatically.

Age-based Rating Content-based Rating
No rating on/off
TV-Y on/off

TV-Y7 Block all

(FV) Fantasy Violence
TV-G on/off
TV-PG Block all

(D) Dialog

(L) Language

(S) Sex

(V) Violence
TV-14 Block all

(D) Dialog

(L) Language

(S) Sex

(V) Violence
TV-MA Block all

(L) Language

(S) Sex

(V) Violence

TV-Y appropriate for children of all ages with themes

TV-Y7 programs designed for children age 7 and older
TV-Y7-FV programs include fantasy violence more intense

TV-G programs suitable for all ages.These programs

TV-PG programs contain elements that some parents

TV-14 programs contain elements that may not be

TV-MA programs are designed to be viewed by adults

and elements suitable for children aged 2-6

than other programs in the TV-Y7 category

contain little or no violence, no strong language
and little or no sexual dialogue or situations

may find unsuitable for younger children and
which may need parental guidance.
The program may contain moderate violence,
sexual dialogue and/or situations and some strong
language.

suitable for children under 14 years of age.These
programs include one or more of the following:
intense violence, intense sexual
situations,suggestive dialogue and strong language.

and may be unsuitable for children under the age
of 17.These programs may contain graphic
violence, explicit sexual activity and/or crude or
indecent language.

Block options

There are 3 block options:

Unrated:

•
When Block Options Unrated is set to ON,movie and TV programs with a rating of None are
blocked. Sports, News and Weather forecast programs are categorized as None rating programs.

•

No Rating:

All programming with no content advisory data can be blocked if No Rating is set to ON.Any
programming could fall into this category.

•

Blocking

The blocking control is what can be thought of as the “master switch” for AutoLock™. This control
affects the settings you have chosen for blocking programs according to movie ratings or TV ratings,
or for blocking programs that have no rating or are unrated.
When the blocking control is
blocking control is

ON, blocking will occur according to the settings you have chosen.

OFF, the blocking or censoring of programs is disabled.When the

12

Closed Captions

OK

®

®

®

®

VCR DVD TV SAT AMP

CCMENU

B

Ò®‡π

º

†

INFO

TV PC

SURF

FORMAT

HD

SURR

SELECT

CC

Closed Captioning allows you to read the voice content of
television programs on the TV screen assuming that the service is
available in the broadcast. Designed to help the hearing impaired,
this feature uses on-screen ‘text boxes’ to show dialogue and
conversations while the TV program is in progress. Captions will
appear on the screen during captioned broadcasts.

& Press the CC button repeatedly to select Off, CC-1, CC-2 or

CC-MUTE.

When

Off is selected, the TV will not display Closed Captions

information;
When

CC-MUTE is selected the TV will automatically display

CC-1 when the mute function is active.When the mute function

is not active, the TV will not display Closed Captions
information.
Usually

CC-1 is the most used, CC-2 may be used for alternated

languages if they are being transmitted, Dialogue (and
descriptions) for the action on the captioned TV programs
shown on screen.

Note:The captions do not always use correct spelling and grammar.
Not all TV programs and product commercials are made for
broadcast with Closed Caption information included. Refer to your
area’s TV program listings for the TV channels and times of Closed
Caption shows.The captioned programs are usually noted in the TV
listings with service marks such as ‘CC’.

This television provides display of television closed captioning
conforming with the EIA-608 standard and in accordance with
Sections 15.119 of the FCC rules.

PIP (Picture in Picture )

The Picture In Picture feature allows you to call
up a smaller second window within your main
screen enabling you to watch a TV channel and
a picture from a digital device connected to

HDMI (AV3) (Digital High Definition device), at

the same time.

& Press the MENU button.
é With the cursor, select Features, then PIP.
“ Press the cursor right to select the available

PIP sizes:

by-side

PIP Combinations:

Off, Small, Medium, Large or Side-

.

Mode:

Main screen

PIP screen

TV

TV

HDMI

‘ Select Horizontal or Ve r tical to move the PIP

HD

HDMI

TV/A-HD/VGA

When having selected a size, and a device is
connected to HDMI (AV3) and switched on,
the PIP window automatically appears. Press
the

P- or P+ button or the digit buttons to

select other TV channels or to display the

HDMI (AV3) device window in the main

screen.

window to another corner of the main screen.

PC

VGA

HDMI

13

Using in PC monitor mode

Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p. 8).

Choosing PC mode

Press the PC button on the remote control to switch the TV to PC mode.
Press the
If there is no PC signal for more than five seconds, the TV automatically goes into standby mode.

Using the PC menus

Reset to Factory Vertical

TV button to return to TV mode.

TV Menu

Picture TV

Sound PC

Features HD

Install

Mode π

PC mode

Picture π Brightness

Audio selection Picture

Features Horizontal

Mode Color Temp.

Features

Phase

Clock

Format

PIP

Auto Adjust

Press the MENU button to access the specific settings of
the PC monitor mode. Use the cursor buttons to adjust
them (the settings are automatically saved).

Picture

•

Brightness/Picture: to adjust the brightness and

contrast.

•

Horizontal/Vertical: to adjust the horizontal and

vertical placing of the image.

•

Color Temperature: to adjust the colors (cool, normal

or warm).

Audio selection

To choose the sound reproduced on the TV
(

PC/HD or TV).

Note:

- You must choose TV mode before going to TV/HD mode.

- To listen to the sound from a HD device in PC mode, take
care you also connected the audio cables to the HD device.

Features

•

Phase/Clock: eliminates the horizontal (Phase) and

vertical (

•

Format: to choose between large screen (Fullscreen)

or the original (

•

PIP: change the Size and Position of the PIP window on

the screen when the

•

Auto adjust:Position is set automatically.

Clock) interfering lines.

Native) format of the PC screens.

PIP button is used.

14

Reset to Factory

To r eturn to the factory settings

Mode

To come back to TV mode.

Record with your recorder

To r ecord S-VHS quality, connect an S-VHS
peripheral directly to the recorder.

Record a TV program

You can record a TV program using your recorders
tuner without affecting your TV.

& Select the channel number on your recorder.
é Set your recorder to record.

See the handbook for your recorder.

Switching channel numbers on your TV does not
disturb recording !

Record a recorder from

You can record a program on your recorder from
the TV tuner via

& Switch on the device.
é Select the correct channel on your TV and the

correct input on your recorder.

“ Set your recorder to record.

You record the tuner channel of the TV, even
when you switch to an AV input using the
button on the remote control.

Do not switch channels or turn off your TV when
you are recording through

Note:When a TV channel or AV source is blocked
because of a rating set via the Channels menu (see
p. 12), also the record output picture and sound are
muted.

Regulatory Notices - Federal Communications Commission Notice

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio or
television technician for help.

Modifications ­The FCC requires the user to be notified that any
changes or modifications made to this device that are
not expressly approved by Magnavox Consumer
Electronics may void the user’s authority to operate
the equipment.

Cables ­Connections to this device must be made with
shielded cables with metallic RFI/EMI connector hoods
to maintain compliance with FCC Rules and
Regulations.

Canadian notice ­This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations.

Avis Canadien ­Cet appareil numérique de la classe B respecte toutes
les exigences du Règlement sur le matériel brouilleur
du Canada.

MONITOR OUT

MONITOR OUT.

AV+

MONITOR OUT.

15

Tips

Before Calling Service

Symptoms Items to Check and Actions to follow

“Ghost” or • This may be caused by obstruction to the antenna due to high rise buildings or hills.
double images Using a highly directional antenna may improve the picture.

No power • Check that the TV’s AC power cord is plugged into the mains socket.

No picture • Check antenna connections at the bottom of the TV to see if it properly connected

No picture and •Your TV has a protective mode in case there is too much heat build-up.
power switched on Check the clearance around the vents of the device to be certain there are no

No sound • Increase the VOLUME.

Good sound but • Adjust the contrast, color, tint and brightness setting.
poor color or Tr y another auto picture setting.
no picture

Poor picture • Check the HDMI connection.

Snowish picture • Check the antenna connection.
and noise

Television not • Check whether the batteries are working. Replace if necessary.
responding to • Clean the remote control sensor lens on the TV.
remote control • Operating range between TV and the remote control should not be > 240”.

• Unplug the television, wait for 60 seconds.
The re-insert plug into the mains socket and turn on the television again.

to the TV.

•Possible broadcast station trouble.Try another channel.

• Adjust the contrast and brightness settings.Try another auto picture setting.

• Check the Closed Captions control. Some TEXT modes could block the screen.

• Switch your HDMI-source to a correct display mode.

blocking walls or cabinets which would limit the air flow.

• Check that the TV is not muted, press the

• When no signal is detected, the TV automatically switches off the sound.
This is proper operation and does not indicate a malfunction.

•You can still use the buttons on the top side of your TV.

• Check if the remote control is in the correct mode.

button on the remote control.

¬

Control of • The infrared signals of the screen may influence the reception sensibility of
accessory devices other peripherals.

No stable or not
synchronized VGA
picture

Solution: replace the batteries of the remote control of other devices.
E.g. keep away a wireless headphone from within a radius of 50”.

Check if you have selected the correct VGA mode in your PC.

16

Power Your TV consumes energy in the standby mode. Energy consumption contributes

to air and water pollution. Power consumption: 2 W.

Miscellaneous • Ambient temperature: +5~ +40°C

• Mains: 50/60 Hz - Auto voltage ranging from 96 to 140V.

•Power consumption: around 160W

• Standby consumption: < 2 W

•Weight (excl. packaging): 40 Lbs

• Dimensions (wxhxd): 895 x 490 x 110

If your problem is not solved ?

Turn your TV off and then on again once.

Never attempt to repair a defective TV
yourself.

Telephone number Magnavox Customer
Care Centre:
1-800-705-2000

Check with your dealer or call a TV
technician.

17

MAGNAVOX LIMITED WARRANTY

One (1) Year Labor & One (1) Year Parts & One (1) Year Display Repair

MAGNAVOX warrants this product against defect

in material or workmanship, subject to any
conditions set forth as follows:

PROOF OF PURCHASE

You must have proof of the date of purchase to
receive repair on the product.A sales receipt
or other document showing the product and
the date that you purchased the product as
well as the authorized retailer included, is
considered such proof.

COVERAGE

(If this product is determined to be defective)

• LABOR: For a period of one (1) year from the
date of purchase, Magnavox will repair or
replace the product, as its option, at no charge,
or pay the labor charges to any Magnavox
authorized service center.After period of one
(1) year, Magnavox will no longer be
responsible for charges incurred.

•PARTS: For a period of one (1) year from the
date or purchase, Magnavox will supply, at no
charge, new or rebuilt replacement parts in
exchange for defective parts. Magnavox
authorized service centers will provide removal
and installation of the parts for one (1) year.

• DISPLAY: For a period of one (1) year from the
date or purchase, Magnavox will supply, at no
charge, a new or rebuilt active display device in
exchange for the defective display.
Magnavox authorized service centers will
provide removal and installation of the parts
under the specified labor warranty.

EXCLUDED FROM WARRANTY COVERAGE

Your warranty does not cover:

• Labor charges for installation or setup of the
product, adjustment of customer controls on
the product, and installation or repair of
antenna systems outside of the product.

•Product repair and/or part replacement
because of improper installation, connections to
improper voltage supply, abuse, neglect, misuse,
accident, unauthorized repair or other cause
not within the control of Magnavox.

•A product that requires modification or
adaptation to enable it to operate in any
country other than the country for which it
was designed, manufactured, approved and/or
authorized, or repair of products damaged by
these modifications.

• Damage occurring to product during shipping
when improperly packaged or costs associated
with packaging.

•Product lost in shipment and no signature
verification of receipt can be provided.

•A product used for commercial or institutional
purposes (including but not limited to rental
purposes).

•Products sold AS IS or RENEWED.

TO OBTAIN WARRANTY SERVICE IN THE USA,
PUERTO RICO, OR US VIRGIN ISLANDS...

Contact Magnavox Customer Care Center at
1-800-705-2000.

TO OBTAIN WARRANTY SERVICE IN CANADA

1-800-661-6162 (French speaking)
1-800-705-2000 (English or Spanish speaking)

REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY FOR THE CONSUMER. MAGNAVOX
SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR BREACH
OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT, EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS M-LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.

Some stated do not allow the exclusions or
limitation of incidental or consequential damages,
or allow limitations on how long an implied
warranty lasts, so the above limitations or
exclusions may not apply to you. In addition, if you
enter into a service contract agreement with the
Magnavox partnership within ninety (90) days of
the date of sale, the limitation on how long an
implied warranty lasts does not apply.

This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.

Magnavox, P.O. Box 520890, Miami, FL 33152 [phone]

18

FACTORY SERVICE LOCATIONS

★

•

Tampa/W Florida

★

•

San Francisco/Metro Area

•

¥

•

Philadelphia/S New Jersey

•

Atlanta/N Georgia

•

Houston

Knoxville/E Tennessee

Charlotte

Los Angeles★

★

★

Indicates In-Home Service Only

Milwaukee: call Chicago
Cincinnati and Columbus: call Cleveland
Nashville and Chattanooga: call Knoxville
Washington/Baltimore: call Philadelphia
Charlotte: call Atlanta
All Florida locations: call Tampa
Los Angeles: call San Francisco

Toll-free numbers provided on the next page

• Indicates In-Home/Carry-In Service

Toll-free numbers provided on the next page

★

Milwaukee

Nashville

★

Chattanooga

★

★

Cincinnati

Orlando

Ft. Myers/SW Florida

Miami/SE Florida

•

Dallas-Fort Worth

★

Washington/Baltimore

★

Cleveland/N Ohio

★

Columbus

•

Chicago

•

Detroit/Toledo

•

Note: If you reside in one of our Factory Service Branch areas (see directory on back), you can contact

the nearest Service Branch to obtain efficient and expedient repair for your product. If your product is In­Warranty, you should have proof-of-purchase to ensure No Charge Service. For Out-of-Warranty service,
call the location nearest you.

Nota: Si vous résidez dans une des régions desservies par une succursale de service après vente du

fabricant (voir liste ci-dessous), vous pourrez contacter la branche de service après vente la plus près de
chez vous pour obtenir un service après vente rapide et efficace. Si le produit est sous garantie, il suffira
de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts
par la garantie, contactez le center le plus près de chez vous.

Nota: Si Ud. reside en una de nuestras zonas para sucursales de servicio al de fábrica (ver directorio más

abajo), Ud. puede comunicarse con la sucursal de servicio más cercana para obtener una reparación
oportuna y eficaz de su producto. Si su producto está todavía bajo garantía, Ud. debe presentar
comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del
vencimiento de la garantía, llame al lugar más cercano de los abajo indicados.

In Canada

How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact at 1-800-661-6162 (French speaking)

1-800-531-0039 (English or Spanish speaking)

Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre
center de service ou le service à domicile
Veuillez contacter à: 1-800-661-6162 (Francophone)

Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse al: 1-800-661-6162 (Francés)

Au Canada

1-800-531-0039 (Anglais ou Espagnol)

1-800-531-0039 (Inglés o Español)

En el Canadá

19

FACTORY SERVICE LOCATIONS

Qualiy service is as close as your telephone! Simply look over the list below for the number of a Factory
Service Center near you.
Your product will receive efficient and expedient carry-in, mail-in, or in-home service, and you will receive
peace of mind, knowing your product is being given the expert attention of Magnavox’ Factory Service.

Comment obtenir notre service après vente rapide et efficace soit par courrier, à domicile, ou en se
présentant à un centre de service Magnavox. Plus de 600 centres de réception de produits à réparer à
travers le pays: contacter le centre de service aux consommateurs le plus proche pour savoir
l’emplacement de ces dépôts dans un rayon de 50 à 75 miles (80 km à 120 km) du centre de service local.

Cómo obtener un servicio oportuno y eficiente por correo, en casa o en persona para su producto a
través de un centro Magnavox de servicio. Mas de 600 sitios por todo el país para la recepción de
productos necesitados de reparaciones: comunicarse con el centro de servicio de fabrica mas cercano
para estos lugares dentro de un radio de 80 a 120 km (50 a 75 millas) del centro de servicio local.

ATLANTA

Philips Factory Service
550 Franklin Road., Suite F
Marietta, GA 30067
800-273-1501

TAMPA

Philips Factory Service
1911 US Highway 301 North
Tampa, FL 33619
800-442-2027

SAN FRANCISCO

Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9103

HOUSTON

Philips Factory Service
1110 N. Post Oak Rd., Suite
100
Houston,TX 77055
800-952-3254

CLEVELAND

Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037

DETROIT

Philips Factory
25173 Dequindre
Madison Heights, MI 48071
800-438-1398

DALLAS-FORT WORTH

Philips Factory Service
415 N. Main Street, #107
Euless,TX 76040
800-952-3254

CHICAGO

Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922

KNOXVILLE

Philips Factory Service
6700 D Papermill Rd.
Knoxville,TN 37919
800-821-1767

PHILADELPHIA

Philips Factory Service
352 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320

20

ERRATUM

EN

* Attention:For optimal performance, please perform an automatic channel

installation. See Auto program, p.3

* p. 5 SURF

With this feature you can easily switch between different TV channels/ sources
that currently interest you.
Press the
most recently channel is displayed.
Press cursor up/down to immediately select the desired TV channel or source of
the list.
To add a new channel or source to the 8 channels list: tune to the channel or
source you wish to add.
Press the
If there are already eight channels/sources in the list, the one at the bottom of the
list will be removed.
To r emove a channel or source: select the channel number you want to remove.
Press the
Press the

* p. 9 To select connected devices

According to where you connected the accessory devices, press:

AV+ followed by digit ‘1’ and followed by P+ to select CVI.

SURF button. A list appears at the left side of the screen. On top, the

SURF button. Press the cursor right to add.

SURF button. Press the cursor right to remove.
SURF button or wait for the time out to dismiss the Surf display.

3104 315 2358.1