Philips 29PT8641/12, 29PT8521/12, 32PW8751/12, 28PW8651/12, 29PT8521 User Manual

...

MODEL :

PROD. NO :

Please note the reference numbers for your TV set located on the packaging or on the back of the set.

FR Veuillez noter les références de

votre téléviseur situées sur l’emballage ou au dos de l’appareil.

NL Let op de referenties van uw

televisietoestel die op de verpakking of op de achterkant van het toestel staan.

Notieren Sie die Referenznummern Ihres Fernsehgeräts, die sich auf der Verpackung bzw. auf der Rückseite des Geräts befinden.

IT Notare i riferimenti del vostro

televisore situati sull’imballaggio o sul retro dell’apparecchio.

DK Bemærk de oplysninger om dit

TV, der findes på kassen eller bagsiden af TV-apparatet.

NO Noter deg referansen for TV-

apparatet, som du finner på emballasjen eller på baksiden av apparatet.

SU Notera de uppgifter om er TV

som återfinns på kartongen eller baksidan av TV-apparaten.

SF Lue myös television

myyntipakkauksessa tai television takana olevat merkinnät.

Anote las referencias de su televisor que se encuentran en el embalaje o en la parte trasera del aparato.

Anote as referências do seu televisor localizadas na embalagem ou na parte de trás do aparelho.

GR ™ЛМВИТЫЩВ ЩИ˜ Ф‰ЛБ›В˜ ¯Ъ‹ЫЛ˜

ЩЛ˜ ЩЛПВﬁЪ·Ы‹˜ Ы·˜ Ф˘ ‚Ъ›ЫОФУЩ·И ЫЩЛ Ы˘ЫОВ˘·Ы›· ‹ ЫЩФ ›Ыˆ М¤ЪФ˜ ЩЛ˜ Ы˘ЫОВ˘‹˜

TR Ambalaj›n üzerinde ya da aletin

arkas›nda bulunan referanslar› baﬂka bir yere not edin.

HU Kérjük vegye figyelembe az Ön

televíziójának a hátoldalán és a csomagoláson feltüntetett katalógusszámokat.

á‡ÔË¯ËÚÂ ÌÓÏÂ ÏÓ‰ÂÎË ‚‡¯Â„Ó ÚÂÎÂ‚ËÁÓ‡, ÍÓÚÓ˚È ÛÍ‡Á‡Ì Ì‡ ÛÔ‡ÍÓ‚Ó˜ÌÓÈ ÍÓÓ·ÍÂ ËÎË Ì‡ Á‡‰ÌÂÈ ÒÚÓÓÌÂ ‡ÔÔ‡‡Ú‡.

PL Prosimy o zanotowanie oznaczeń

telewizora umieszczonych na opakowaniu lub tylnej części urządzenia.

Poznamenejte si typové údaje Vašeho televizoru umístěné na obalu nebo na zadní straně přístroje.

Poznačte si typové údaje Vášho televízora nachádzajúce sa na obale alebo na zadnej strane prístroja.

min 1m

Introduction

Table of Contents

Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly.

Note: Specification and information subject to change without notice.

Installation

Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

The keys on the TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Program sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Program name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Favourite Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Other settings in the Install menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Operation

Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Sound adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Feature settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

TV lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Screen Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Peripherals

Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Sides connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Practical information

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Safety Information: Electric, Magnetic and Electromagnetic Fields (“EMF”) . . . .12

Recycling

This packaging of this set can be recovered or recycled.Apply to the local authorities in order to minimise environmental waste.

Disposal of your old product.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.

The television set has 4 or 5 keys which are located on the front or the top of the set depending on the model.

The VOLUME - + (- ” +) keys are used to adjust sound levels.The PROGRAM - + (-

P +)

keys are used to select the required programmes. To access the menus, simultaneously hold down the

” - and ” + keys (or MENU key).

The PROGRAM - + keys may then be used to select an adjustment and the -

” + keys to

make that adjustment. To exit from the menus, hold down the 2

” -

and

” + keys (or MENU key).

Note : when the Child Lock function is activated, these keys are unavailable (refer to Features menu on page 7).

Positioning the television set

Place your TV on a solid, stable surface, leaving a space of at least 5 cm around the appliance. To avoid accidents,do not put anything on the set such as a cloth or cover, a container full of liquid (vase) or a heat source (lamp). The set must not be exposed to water.

Connections

• Insert the aerial plug into the : socket at the rear of the set.

If you are using an indoor aerial, reception may be difficult in certain conditions.You can improve reception by rotating the aerial. If the reception remains poor, you will need to use an external aerial.

• Insert the mains plug into a wall socket (220-240 V / 50 Hz).

“

Remote control

Insert the two R6-type batteries (supplied) making sure that they are the right way round. Check that the mode selector is set to TV. The batteries supplied with this appliance do not contain mercury or nickel cadmium. If you have access to a recycling facility, please do not discard your used batteries (if in doubt, consult your dealer).When the batteries are replaced, use the same type.

‘

Switching on

To switch on the set, press the on/off key. A red indicator comes on and the screen lights up. Go straight to the chapter Quick installation on page 4. If the television remains in standby mode, press

P # on the remote control.

The indicator will flash when you use the remote control.

5 cm

Installing your television set

The keys on the TV set

Remote control keys

& Standby

To set the TV to standby mode. To switch the TV set on again, press

b,P @#or 09.

é Sleeptimer

To select the length of time before the set automatically switches to standby (from 0 to 240 minutes).

“

Select peripherals (p.10)

Press several times to select the required EXT connector.

‘ Teletext keys (p. 8) ( Dual screen

(according to the version)

To activate/disable the display on 2 screens. The second screen displays teletext.

§ Menu

To call up or exit the menus.

è Cursor / Format

These 4 keys are used to navigate through the menus. (p. 9)

! Volume

To adjust the sound level.

ç Mute

To mute or restore the sound.

0 Screen information

To display / remove the programme number, the name (if it exists), the time, the sound mode and the time remaining on the timer. Hold down for 5 seconds to permanently display the programme number on the screen.

1 Sound mode

Used to force programmes in

Stereo and Nicam

Stereo

to Mono or,for bilingual programmes, to

choose between

Dual I or Dual II.

The

Mono indication is red when in forced position.

2 Surround Sound

To activate / deactivate the surround sound effect. In stereo,this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround*, you can experience Dolby Surround Pro Logic sound effects.

3 Smart picture and sound

Used to access a series of predefined

picture and sound

settings.

The

personal position relates to settings selected from the

menus.

4 Teletext call (p.8) 5 Programme selection

To access the next or previous TV channel from the list of Favourite Programmes (see p. 5).

6 Digit keys

Direct access to the programmes.For a 2 digit programme, enter the 2nd digit before the dash disappears.

7 Active Control

(according to the version)

Optimizes the quality of the picture according to the quality of reception.

• Plug the TV into a 220V – 240V AC, 50 Hz supply.

• Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the screen. – there is a lightning storm. – the set is left unattended for a prolonged period of time.

• Cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth.

• No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vicinity.

• Do not place your TV set under direct sunlight or heat.

• Do not cover or block the TV as it could lead to overheating.

• Leave at least 5 cm around each side of TV set to allow for proper ventilation.

• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water.

• Battery Usage CAUTION – To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

– Install all batteries correctly, with + and – aligned as marked on the unit. – Do not mix batteries (old and new or carbon and alkaline, etc.). – Remove batteries when the unit is not used for a long time.

Useful Tips

• Do not leave your set on standby mode for a prolonged period of time. Switch off set to allow it to be demagnetised. A demagnetised set supports good picture quality.

• Do not shift or move the set around when it is switched on. Uneveness in colour in some parts of the screen may occur.

• Never attempt to repair a defective TV yourself. Always consult a skilled service personnel.

Safety Information

Quick installation

Program sort

Program name

The first time you switch on the television,a menu appears on the screen and the tuning starts automatically.

If the menu is not displayed, press and hold down the

”- and ”+ keys on the TV set for 5

seconds to start the tuning

(or MENU key

depending on versions)

All the available TV programs will be stored.

This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of the search, the menu disappears.

To exit or interrupt the search, press H. If no program is found, consult the possible solutions p. 12.

& If the transmitter or cable network sends the

automatic sort signal, the programs will be numbered correctly.In this case, the installation is complete.

é If this is not the case, you need to use the

Sort menu to number the programs correctly.

Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the

îÏ

keys and validate with ¬.

& Press key H.The Main menu is displayed on

the screen.

é With the cursor, select the

Install menu

followed by the

Sort menu.

“ Select the programme you want to move using

the

îÏ keys and press ¬.

‘ Then use the

îÏ keys to select the new

number and validate with

È.

( Repeat steps “ and ‘ for each program you

wish to renumber.

§ To quit the menus, press

If required, you can give a name to the programmes and external connectors.

Note

: on installation, the programs are named

automatically when an identification signal is sent.

& Press the

H key.

é With the cursor, select the

Install menu, then

Name.

“ Use the @ P # keys to select the

programme to name or rename.

‘ Use the

È¬ keys to move around the

name display area (5 characters) and the

îÏ keys to select the characters.

( When the name has been entered, use the

key to exit.The name is stored.

§ Repeat steps “ to ( for each programme you wish to name.

è To quit the menus, press

Main •

Install •

Language •

Country •

Auto Store •

Manuel Store •

Sort •

Program •

Name

•

00 01 BBC1 02 BBC2

03ÆANGLI

04 CH4 05 CH5

Main •

Install •

Auto Store •

Searching Please Wait

Prog. found 3 525,25 MHz

Manual store

Favourite programmes

This menu is used to store the programmes one at a time.

& Press the

H key.

é With the cursor, select the

Install menu then

Manual store :

“

System: select Europe (automatic detection*)

Western Europe (BG standard), Eastern

Europe (DK standard), United Kingdom

(I standard) or France (LL’ standard).

* Except for France (LL’ standard), you must select

choice

France.

‘

Search : press ¬.The search starts. Once a

programme is found, the scanning stops and its name is displayed (when available). Go to the next step. If you know the frequency of the required programme, this can be entered directly using the

0 to 9 keys.

If no picture is found, consult the possible solutions (p. 12).

( Program No. : enter the required number with

the

È¬ or 0 to 9 keys.Example :

program 1, enter

01.

Fine Tune : if the reception is not satisfactory,

adjust using the

È¬ keys.

Store : press ¬.The program is stored.

! Repeat steps ‘ to è for each programme to

store.

ç To quit the menus, press d.

This menu allows you to select the programmes to be accessed with the

@ P # key.

& Press the

H key.

é With the cursor, select the

Install menu then

Favourite Progr. and press ¬.

The list of favourite programmes is displayed. The programmes that were stored at installation will automatically appear on this list.

“ Use the up/downcursor to select the required

programme.

‘ Use the left/right cursor to add or remove a

programme from the list.

( Run through steps “ and ‘ for each

programme to be added or removed from the list.

§ To exit, press

d several times.

Other settings in the Install menu

& Press the H key and select the Install menu: é

Language : to change the display language for

the menus.

“

Country : to select your country (GB for

Great Britain).

This setting is used for the search, automatic programme sort and teletext display. If your country does not appear in the list, select “. . .”

‘

Auto Store : to start automatic search for all

programmes available in your region. If the transmitter or cable network sends the

automatic sort signal, the programmes will be numbered correctly.If this is not the case, you need to use the Sort menu to renumber the programmes (see p.4).

Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the

îÏ

keys and validate with ¬.To quit or interrupt the search, press

H. If no picture is found, consult the

possible solutions (p. 12).

( To quit the menus, press

Main •

Install •

Language •

Country •

Auto Store •

Manuel Store

Sort •

Program •

Name

•

System •

Search •

Program No. •

Fine Tune •

Store •

Main •

Install •

Language •

Country •

Auto Store •

Manuel Store •

Sort •

Favourite Progr.

Name

•

2 •

Picture settings

Sound adjustments

& Press H then ¬.The Picture menu is

displayed :

é Use the

îÏ keys to select a setting and

the

È¬ keys to adjust.

Note : during the picture adjustment, only the selected line remains displayed. Press îÏ to display the menu again.

Description of the adjustments :

• Brightness : this changes picture brilliance.

• Colour : this changes the intensity of the colour.

• Contrast : this changes the difference

between the light and dark tones.

•

Sharpness : this changes the picture definition.

• Colour Temp.: this changes the colour

rendering:

Cold (bluer), Normal (balanced)

Warm (redder).

•

Digital Options :

- 100 Hz : 100 Hz processing.

Digital Scan (according to the version) : reduces

line flicker which is visible on some pictures.

- Double lines:doubling of vertical resolution

which removes visible picture lines.

Advised for NTSC (60Hz) pictures.

“ Once the adjustments have been made, select

Store and press ¬ to store them.

Press

d to exit.

& Press H, select Sound (Ï) and press ¬.

The

Sound menu is displayed :

é Use the

îÏ keys to select a setting and

the

È¬ keys to adjust.

Description of the settings :

•

Treble : this alters the high frequency sounds.

•

Bass : this alters the low frequency sounds.

•

Balance : this balances the sound on the left

and right speakers.

•

Delta Volume : this is used to compensate

any volume discrepancies between the different programs or EXT sockets. This setting is available for programs 0 to 40 and the EXT sockets.

•

AVL (Automatic Volume Leveller) : this is

used to limit increases in sound, especially on program change or advertising slots.

•

HP Volume : allows you to adjust the

headphones volume independently from the loud-speakers on the TV set.

“ Once the adjustments have been made, select

Store and press

¬ to store these changes.

‘ To quit the menus, press

Feature settings

& Press H,select Features (Ï) and press ¬.

You can adjust :

Timer, Child Lock and Parental Cont.:

see next page

“

Dynamic NR: Min, Med (optimum position), Max or Off : attenuates picture noise (snow)

in difficult reception conditions.

‘

Rotation (only available on very large screen

sets) : large screen sets are sensitive to terrestrial magnetic field variations. This setting is used to compensate for this by adjusting the picture rotation.

(

Dynamic Contrast (according to the version) : Min, Med (optimum position), Max or Off.

Enhances the contrast of details in lighter, average and darker areas.

Decoder : select the programme(s) that use the

external decoder then select the connector where the decoder is connected :

EXT1 or

EXT2.

If the decoder is connected to the video recorder, select the video recorder’s connector (

EXT2).

è To quit the menus, press

Brightness •

Colour •

Contrast •

Sharpness •

Colour Temp. •

Digital Options •

Store •

Main

•

Picture

Sound

•

Features

•

Install

•

Treble •

Bass •

Balance •

Delta Volume •

AVL •

HP Volume •

Store •

Main •

Picture •

Sound

Features •

Install

•

Timer function

TV lock

This menu lets you use the TV set as an alarm.

& Press the

H key.

é With the cursor, select the

Features menu

then

Timer :

“ Time : enter the current time.

Note : the time is updated automatically each time the TV set is switched on via the teletext information on programme 1. If this program does not have teletext, the update will not take place.

‘

Start Time : enter the start time.

(

Stop Time : enter the standby time.

Program No. : enter the number of the

programme for the wake-up alarm.

Activate : the settings include:

•

Once for a single alarm,

•

Daily for each day,

•

Stop to cancel.

! Press b to put the TV set in standby.

It will automatically come on at the time programmed. If you leave the TV set on, it will just change programmes at the time entered (and will go to standby mode at the

Stop Time).

By combining the TV lock and Timer functions, you can restrict the period during which the TV set is used, for example by your children.

You can block certain programs or inhibit use of the TV set completely by locking the keys.

Child lock

& Press H. é With the cursor, select the

Features menu

and position

Child Lock to On.

“ Turn off the TV set and hide the remote

control.The TV set cannot be used (except via the remote control).

‘ To cancel : position

Child Lock to Off.

Parental control

& Press the H key, select the Features menu

then

Parental Cont.:

é You must enter your secret access code.

The first time you enter this, enter code 0711

twice and then enter your new code choice. The menu is displayed.

“

Parental Cont. : Use the îÏ keys to

select the TV programme required and validate with

¬.The + symbol will be

displayed opposite the programmes or sockets that are locked.From now on, to view a locked programme, you must enter your secret code, otherwise the screen will stay blank.

All : this is used to lock all the TV programmes and

EXT connectors. The access to the Install menu is also locked. Caution, for encrypted programs using an external decoder, you must lock the corresponding EXT socket.

‘

Change code : this allows you to enter a new

4 digit code. Confirm your new code by entering it a second time.

If you have forgotten your secret code, enter the universal code 0711 twice.

(

Unlock all : this is used to unlock all locked

programmes.

§ Press the

d key to quit.

Timer •

Child Lock •

Parental control •

Dynamic NR •

Time

Start Time Stop Time Program No. Activate

Main •

Picture •

Sound •

Features

Install

•

Timer •

Child Lock •

Parental control •

Dynamic NR •

Main •

Picture •

Sound •

Features

Install

•

On • Off •

Teletext

Press :

You will obtain :

Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.).

Teletext call

Selecting a

page

This is used to call teletext, change to transparent mode and then exit.The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number.

If the channel selected does not broadcast teletext, the indication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel).

Enter the number of the page required using the

0 to 9

or @ P # keys, îÏ. Example:page 120, enter 12

.The number is displayed top left, the counter turns and then the page is displayed.Repeat this operation to view another page.

If the counter continues to search, this means that the page is not transmitted. Select another number.

Direct access

to the items

Coloured areas are displayed at the bottom of the screen. The 4 coloured keys are used to access the items or corresponding pages.

The coloured areas flash when the item or the page is not yet available.

Contents This returns you to the contents page (usually page 100).

Direct

selection of

sub-pages

Enlarge

a page

Double page

teletext

(only available on

certain versions)

Certain pages contain sub-pages (for example, page 120 contains sub-pages

1/3, 2/3 and 3/3). If this is the case, the

page number is displayed in green, preceded by the symbol

Æ, Í or ÍÆ. Use the keys È¬ to directly access

the sub-pages of your choice.

This allows you to display the top or bottom part of the page and then return to normal size.

To activate or deactivate the double page teletext display mode.The active pa

ge is di

splayed on the left and the

following page is displayed on the right.

Hidden

information

Favourite

pages

To display or hide the concealed information (games solutions).

Instead of the standard coloured areas displayed at the bottom of the screen, you can store 4 favourite pages on the first 40 channels which can then be accessed using the coloured keys (red,green, yellow, blue). Once set, these favourite pages will become the default every time tetetext is selected.

& Press the H key to change to favourite pages mode. é Display the teletext page that you want to store. “ Press the coloured key of your choice for 3 seconds.

The page is now stored.

‘ Repeat the operation with the other coloured keys. ( Now when you consult teletext, your favourite pages

will appear in colour at the bottom of the screen. To temporaly retrieve the standard items,press

To clear everything, and return the standard items as the default, press

d for 5 seconds.

SMART

+ +

”

[

- -

564

879

SMART

0 9

Screen Formats

The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen).4:3 pictures sometimes have a black band at the top and bottom of the screen (letterbox format).This function allows you to optimise the picture display on screen.

If your television is equipped with a 4:3 screen.

If your television is equipped with a 16:9 screen.

Press the ¬ key (or È) to select the different modes:

This TV set is also equipped with automatic switching which will select the correct-screen format, provided the specific signals are transmitted with the programmes.

4:3

The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture.The picture may be progressively enlarged using the

îÏ keys.

Zoom 14:9

The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture.The

îÏ keys allow you to compress and move the image vertically to view the

top or bottom of the picture (subtitles).

Zoom 16:9

The picture is enlarged to 16:9 format.This mode is recommended when displaying pictures which have black bands at the top and bottom (letterbox format). Use the

îÏ keys if you

wish to compress and move the image vertically to view the top or bottom of the picture.

Subtitle Zoom

This mode is used to display 4:3 pictures using the full surface of the screen leaving the sub-titles visible. Use the

îÏ keys to increase or decrease the compression at the bottom of the screen.

Super Wide

This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture.The

îÏ keys allow you to scroll the image up or down the screen.

Widescreen

This mode restores the correct proportions of pictures transmitted in 16:9 using full screen display.

Auto Format

The format of the picture is automatically adjusted to fill as much of the screen as possible.

Press the

î key (or Ï) to select the different modes:

4:3

The picture is reproduced in 4:3 format.

Expand 4:3

The picture is enlarged vertically.This mode is used to cancell the black bands when watching a programme in letterbox format.

Compress 16:9

The picture is compressed vertically into 16:9 format.

+ 29 hidden pages

Philips 29PT8641/12, 29PT8521/12, 32PW8751/12, 28PW8651/12, 29PT8521 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual