Register your product and get support at
www.philips.com/welcome
26HFL5561L/27
26HFL5561V/27
32HFL5561D/27
32HFL5561L/27
32HFL5561V/27
37HFL5581D/27
37HFL5581L/27
37HFL5581V/27
42HFL5581L/27
42HFL5581V/27
52HFL5581L/27
EN Quick Start Guide
52HFL5581V/27
1 How to use this guide
The Quick Start Guide helps you install the Philips commercial
television, as quickly as possible. It contains the necessary information
to install the TV and congure the settings. Read and understand the
instructions in the Quick Start Guide before you use your TV.
For detailed information on additional features, download the user
manual by selecting your TV model at www.philips.com/hospitality.
The Quick Start Guide contains the following information:
• contents of the box
• standalone installation instructions
• conguration of channel, advanced and SmartFeatures
settings
• cloning of data
• troubleshooting
OSS declaration
Open source software
This television contains open source software. Philips BU Hospitality
hereby offers to deliver or make available, upon request, for a charge
no more than the cost of physically performing source distribution, a
complete machine-readable copy of the corresponding source code on
a medium customarily used for software interchange.
To obtain the source code, write to:
Philips Singapore Pte Ltd.
Philips BU Hospitality
Software Development Manager
620A Lorong 1, Toa Payoh
Singapore 319762
This offer is valid for three years after the date of purchase of this
product.
En glish
Energy savings mode
This TV is congured in Energy Savings mode.
• This mode will disable the side control keys of the T V and result in a
longer turn on time. To optimize the TV performance, adjust the LOW
POWER STANDBY setting in TV SETUP menu.
• For more details, refer to the information on conguring the LOW
POWER STANDBY feature (see ‘Congure SmartPower settings’ on page
7).
EN
1
2 The contents of the box
The box contains the following items:
• which secure the TV stand to the furniture of the hotel room to
prevent unauthorized removal or theft
• desk-to-stand screws (2)*
• desk-to-stand washers (2)*
• desk-to-stand secure groove nuts (2)*
• which secure the TV stand to the T V to prevent unauthorized
removal or theft
• stand-to-TV secure screws (4)*
• stand-to-TV cross-head screws (4)*
• which secure the TV stand to the furniture of the hotel room
with non-drilling sur faces
• Industrial strength double sided tape (4)*
• the TV
• the TV stand
• Quick Start Guide
• 2-pin power cord
• Guest remote control*
Note
• * The items are available in selected models only.
Note
• The tools required to secure the screws are not included in the box.
Contact your Philips authorized agent or dealer in NAF TA to obtain the
tools.
26”/32”/37”/42”/52” models
x 2
(Available in selected models only)
x 4
(Available in selected models only)
x 4
x 2
x 2
x 4
(Available in selected models only)
2
EN
POWER
SLEEP
SMART
GUEST
DCM
SETUP
TEXT
RECALL
CC
8
1
4 5 6
7
9
2 3
COMMUNICATION >
USE CHANNEL TABLE
YES
CURRENT RING
DIGITAL SETUP
SETUP
CABLE TUNING YES
CHANNEL INSTALL
>
CONFIGURATION
SMARTCLONE
>
>
>
RING2
LANGUAGE
ENGLISH
AUTO INSTALL TV
>
M
POWER
SLEEP
GUIDE
SMART
GUEST
DCM
SETUP
TEXT
RECALL
CC
RESET
CH
8
0
1
4 5 6
7
9
2 3
M
A/CH
++
+
_
SETUP
3 Standalone installation
This section describes how to install the TV channels automatically.
1 Connect the RF signal from the wall socket to the T V.
2 Plug the 2-pin power cord into the power outlet.
• Press Power on the setup remote control.
En glish
3 Set the switch at the side of the setup remote control to SETUP.
Note
• The setup remote control is not included in the box. Contact your Philips
authorized agent or dealer to obtain the remote control.
4 Turn the TV on.
• Press POWER at the side of the TV.
5 Press M on the setup remote control to display the setup menu.
6 Press to select AUTO INSTALL TV.
7 Press to start the automatic installation of channels.
» After the channels are installed, you can change the settings of
the channels, picture, sound, and volume.
EN
3