Philips 42HFL3007D, 22HFL3017W, 22HFL3017D, 26HFL3017W, 22HFL3007D User manual
...
Register your product and get support at
www.philips.com/welcome
EN User Manual
Contents
1 |
Get started |
3 |
|
TV tour |
3 |
|
TV controls |
3 |
|
Important information |
5 |
|
Sustainability |
8 |
|
Help and support |
9 |
2 |
Use your TV |
10 |
|
Watch TV |
10 |
|
View programme guide |
13 |
|
View media |
13 |
3 Use more of your TV |
15 |
|
|
Professional mode |
15 |
|
Play games |
19 |
|
View Text |
19 |
|
Set locks and timers |
20 |
|
Use EasyLink |
21 |
|
View Scenea |
24 |
4 Set up your TV |
25 |
|
|
Picture and sound |
25 |
|
Channel settings |
26 |
|
Language settings |
28 |
|
Universal access settings |
29 |
|
Other settings |
30 |
|
Update software |
30 |
|
Restore default settings |
31 |
5 |
Connect your TV |
32 |
|
About cables |
32 |
|
Connect devices |
34 |
|
Connect more devices |
41 |
|
Watch a connected device |
43 |
|
Common interface |
44 |
6 |
Troubleshooting |
45 |
|
General issues |
45 |
|
Channel issues |
45 |
|
Picture issues |
46 |
|
Sound issues |
46 |
|
Connection issues |
47 |
|
Contact Philips |
47 |
EN 2
7 |
Product specifications |
48 |
|
Power and reception |
48 |
|
Display and sound |
48 |
|
Display resolutions |
48 |
|
Multimedia |
49 |
|
Connectivity |
50 |
|
Supported TV mounts |
50 |
|
Help version |
51 |
8 |
Index |
52 |
1 Get started
TV tour
High Definition TV
If your TV is equipped with a High Definition (HD) display, you can watch HD video in the following ways and more:
a Blu-ray disc player, connected with an HDMI cable, playing a Blu-ray disc
an upscaling DVD player, connected with an HDMI cable, playing a DVD disc
an over-the-air HD broadcaster (DVB- T MPEG4)
a digital HD receiver, connected with an HDMI cable, playing HD content from a cable or satellite operator
an HD game console, connected with an HDMI cable, playing an HD game
Media playback
If you connect your TV to a USB storage device, you can enjoy your movies, music and pictures on a wide screen TV with excellent sound.
Programme guides
You can find out what's on and what's coming up with the now and next EPG (Electronic Programme guide) or eight day EPG.
Intuitive menus
With the TV's intuitive menus, you can easily access the channel or media file that you want or tweak the TV settings to suit your needs.
TV controls |
English |
Rear controls |
1
2
3
4
1.
(Standby): Switch the TV on or off.
2.CH +/- (Channel +/-): Switch to the next
or previous channel.
3.
(Source): Access a connected device.
4. 
+/- (Volume +/-): Increase or decrease volume.
Side controls (For 22HFL3007D and 26HFL3007D only)
1
2
3
4 
5
EN 3
1.
+/- (Volume +/-): Increase or decrease volume.
2.CH 
(Channel 
): Switch to the
next or previous channel.
3.No function.
4.
(Source): Access a connected device.
5.
(Standby): Switch the TV on or off.
Sensors
1. Remote control sensor
Point the remote control at the sensor. Make sure that the line-of-sight between the remote control and the TV is not blocked by furniture or other objects.
Remote control
1
2
4 3
5
1.
(Standby): Switch the TV on or to standby.
2.
MyChoice: Access customised menu.
3.
GUIDE: Access TV Guide.
4.
ThemeTV: Access ThemeTV options.
5. 
TV: Switch source to watch TV.
1
For HFL3017 - 32to 42-inch TVs only
1
EN 4
6
8 7
9
6.
CHANNEL GRID: Access the TV channel list.
7.
SOURCE: Access a connected device.
8.
CLOCK: Access the TV clock.
9. 
FORMAT: Change picture format.
10
11
12
10.
(Home): Access the Home menu.
11.OK: Confirm an entry or selection.
12.
(Navigation buttons): Navigate
through menus and select items.
13
15
14
16
13.
LIST: Access the TV channel list.
14.
ADJUST: Adjust TV settings.
15.
INFO: Display information about
current activity.
16. 
OPTIONS: Access currently available options.
17
18
19
20
17.
(Back): Return to the previous menu page or exit from a TV function.
18.CH - / CH +: Change channels.
19.+/- (Volume): Adjust volume.
20.
(Mute): Mute or restore audio.
21
23
22
24
21.Colour buttons: Select tasks or options.
The buttons function according to the services offered by the service provider.
22.SUBTITLE: Switch subtitles on or off.
23.0-9 (Numeric buttons): Select TV
channels or enter text.
24. TEXT: Enable or disable text.
EasyLink controls
Note: EasyLink controls are available when
the connected device is HDMI-CEC compliant.
With EasyLink controls, you can control your TV and other HDMI-CEC devices with one remote control.
Access EasyLink controls
1.While you view content from a connected HDMI-CEC device, press 
OPTIONS.
2.Select [Show remote control], then press OK.
3.Select the EasyLink control button, then press OK.
Read more about EasyLink in Use more of your TV > Use EasyLink (Page 21).
Important information
Safety
Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply.
Risk of electric shock or fire!
Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times.
EN 5
English
Never insert objects into the ventilation slots or other openings on the TV.
Never expose the remote control or batteries to rain, water or excessive heat.
Avoid force coming onto power plugs. Ensure that the power plug is fully inserted into the power socket. Loose power plugs can cause arcing or fire.
When the TV is swivelled, ensure that no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing.
To disconnect the TV from the mains power, the power plug of the TV must be disconnected. When disconnecting the power, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
Risk of damage to the TV!
Two people are required to lift and carry a TV that weighs more than 25kg or 55lbs.
When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the combined weight of the TV and the stand.
When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. TP Vision Netherlands B.V. bears no responsibility for improper wall mounting that result in accident, injury or damage.
If you need to store the TV, disassemble the stand from the TV. Never lay the TV on its back with the stand installed.
Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.
EN 6
Parts of this product may be made of glass. Handle with care to avoid injury and damage.
Risk of injury to children!
Follow these precautions to prevent the TV from toppling over and causing injury to children:
Never place the TV on a surface covered by a cloth or other material that can be pulled away.
Ensure that no part of the TV hangs over the edge of the surface.
Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support.
Educate children about the dangers of climbing on furniture to reach the TV.
Risk of swallowing batteries!
The product/remote control may contain a coin-type battery, which can be swallowed. Keep the battery out of reach of children at all times!
Risk of overheating!
Never install the TV in a confined space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure that curtains or other objects never cover the ventilation slots on the TV.
Risk of injury, fire or power cord damage!
Never place the TV or any objects on the power cord.
Disconnect the TV from the socket and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable.
Risk of hearing damage!
Avoid using earphones or headphones at high volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.
Screen care
Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.
Unplug the TV before cleaning.
Clean the TV and frame with a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
To avoid deformations and colour fading, wipe off water drops as soon as possible.
Avoid stationary images as much as possible. Stationary images are images that remain onscreen for extended periods of time. Stationary images include onscreen menus, black bars, time displays, etc. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.
Notice
2012 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. TP Vision Netherlands B.V. warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.
TP Vision Netherlands B.V. cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.
Terms of warranty
Risk of injury, damage to TV or void of warranty! Never attempt to repair the TV yourself.
Use the TV and accessories only as intended by the manufacturer.
The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips Customer Care for service or repairs.
Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty.
Pixel characteristics
This LCD/LED product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.
CE compliance
This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage) and 2004/108/EC (EMC).
\\
Compliance with EMF
TP Vision Netherlands B.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
EN 7
English
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products.
Philips is committed to develop, produce and market products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
Trademarks and copyrights
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world.
All other registered and unregistered trademarks are the property of their respective owners.
EN 8
Sustainability
Energy efficiency
This TV is designed with energy-efficient features. To access these features, press the green button on the remote control.
Energy saving picture settings: You can
apply a combination of energy-saving
picture settings. While you watch TV, press the Green button, then select
[Energy saving].
Screen off: If you only want to listen to
audio from the TV, you can switch off the TV display. Other functions continue to operate normally.
Low standby power: The advanced
power circuitry reduces the power consumption of the TV to an extremely low level, without losing out on the constant standby functionality.
End of use
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.
EU energy label |
|
|
|
The European Energy Label informs you on |
English |
||
the energy efficiency class of the product. |
|||
|
|||
The greener the energy efficiency class of |
|
||
this product is, the lower the energy it |
|
||
consumes. |
|
||
|
|||
On the label, you can find the energy |
|
||
efficiency class, the average power |
|
||
consumption of the product in use and the |
|
||
average energy consumption for 1 year. You |
|
||
can also find the power consumption values |
|
||
for the product on the Philips website for |
|
||
your country at www.philips.com/TV. |
|
||
Help and support
Visit the Philips website
If you can't find what you need in the onscreen [Help], visit the Philips support
website at www.philips.com/support.
On the Philips support website, you can also:
Find answers to Frequently Asked Questions (FAQ)
Download a printable PDF version of this user manual
Email us a specific question
Chat online with Philips Consumer Care (available in certain countries only)
Search the TV forum
Your question may have already been
answered by the Philips TV community of users. Visit www.supportforum.philips.com.
Contact Philips
You can contact Philips Consumer Care in your country for support. The number is available in the leaflet accompanying this
product or online at www.philips.com/support.
Before you contact Philips, write down the model and serial number of your TV. You can find this information on the back of your TV or on the TV packaging.
EN 9
2 Use your TV
Watch TV
Switch TV on or off
Switch the TV on
Press the power switch on the TV.
If the TV is in standby, press 
on the remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch the TV on from standby, press CH +/- or CH
on the TV.
Switch TV to standby
Press 
on the remote control.
The remote control sensor on the TV switches to red.
Switch off the TV
Press 
on the TV. The TV switches off.
Note: Though your TV consumes very little
energy when it is in standby or switched off, it does use some energy. If you are not going to use the TV for an extended period of time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy efficiency settings. The settings are enabled by default, so that if there is no user interaction (such as pressing a remote control button or a control on the rear panel) for four hours, the TV will automatically switch to standby.
EN 10
To disable automatic switch off
1.While you watch TV, press the Green button on the remote control.
2.Select [Auto switch off], then press OK.
3.Use the Navigation buttons to make a selection, then press OK.
Adjust TV volume
Increase or decrease the TV volume
Press +/- on the remote control, or
Press 
+/- on the side or back of the TV.
Mute or unmute the TV volume
Press 
on the remote control to mute the volume.
Press 
again to restore the volume.
Adjust headphone volume
1.Press 
> [Setup] > [TV settings] > [Sound].
2.Select [Headphone volume], then press OK.
Switch TV channels
Press CH +/- on the remote control, or
Press CH +/- or CH 
on the side or back of the TV.
Press the Numeric buttons to enter a channel number.
Manage favourites
You can view all channels or only a list of your favourite channels so that you can find them easily.
Press 
LIST to access the channel list.
Create a list of your favourite channels
1.Press 
LIST.
2.Select the channel to mark as a favourite, then press 
OPTIONS.
3.Select [Mark as favourite], then press OK.
The selected channel is marked.
To deselect a channel, select [Unmark as favourite], and then press OK.
Select a channel list
1.Press 
LIST, then press 
OPTIONS.
2.Select [Select list] > [Favourite] to display channels in the favourite list or [All]
to display all channels. 3. Press OK to confirm.
Manage channel lists
After the channels have been installed, you can manage them:
Rename channels
Reorder channels
Listen to digital radio
Rename channels
You can rename channels. The name appears when the channels are selected.
1.While you watch TV, press 
LIST. The channel list is displayed.
2.Select the channel to rename, then press
OPTIONS.
3.Select [Rename], then press OK.
4.Press the Navigation buttons to select each character, then press OK.
Press OK in the entry screen to enable the Onscreen Keyboard, or
Press [ABC] or [abc] to select an uppercase or lowercase letter.
5.Once complete, select [Done], then press OK to confirm when prompted.
6.Press 
to exit.
Reorder channels
After the channels have been installed, you can reorder the channel list.
1.While you watch TV, press 
LIST. The channel list is displayed.
2.Press 
OPTIONS.
3.Select [Reorder], then press OK.
4.Select the channel to reorder, then press
OK.
5.Press the Navigation buttons to move the
highlighted channel to another location, then press OK.
6.Press 
OPTIONS.
7.Select [Done reordering], then press OK.
Listen to digital radio
If digital radio channels are available, you can listen to them. They are installed automatically when you install the TV channels.
1.While you watch TV, press 
LIST. The channel list is displayed.
2.Press 
OPTIONS.
3.Select [Select list] > [Radio], then press OK.
4.Select a radio channel, then press OK.
Select a source
You can watch a connected device in one of the following ways:
Add its icon to the Home menu for easy access, then select it from the Home menu.
Select from the Source menu.
Note: If you connect an HDMI-CEC
compliant device to the TV, it is automatically added to the Home menu.
Add new device
1.Connect and switch on the device.
2.Press 
.
3.Select [Add new device], then press OK.
4.Follow the onscreen instructions.
If you are prompted to select the TV connection, select the connector that this device uses.
EN 11
English
View from Home menu
After you have added the new device to the Home menu, you can select its icon to start using it.
1.Press 
.
2.Select the device icon from the Home menu.
3.Press OK to confirm.
View from Source menu
You can also press 
SOURCE to display a
list of connector names. Select the connector that connects the device to the TV.
1.Press 
SOURCE.
2.Press the Navigation buttons to select a
connector in the list.
3. Press OK to confirm.
Use smart settings
Your TV comes with smart picture and sound settings. You can apply these settings or customise them.
Select your preferred picture setting
1.While you watch TV, press 
ADJUST.
2.Select [Smart picture].
3.Select an option, then press OK:
[Personal]: Apply your personalised picture settings.
[Vivid]: Rich and dynamic settings, ideal for daytime viewing.
[Natural]: Natural picture settings.
[Cinema]: Ideal settings for movies.
[Game]: Ideal settings for games.
[Energy saving]: Settings that conserve the most energy.
[Standard]: Default settings that suit most environments and types of video.
[Photo]: Ideal settings for photos.
[Custom]: Customise and store your own picture settings.
EN 12
Select your preferred sound setting
1.While you watch TV, press 
ADJUST.
2.Select [Smart sound].
3.Select an option, then press OK:
[Personal]: Apply your personalised sound setting.
[Standard]: Settings that suit most environments and types of audio.
[NEWS]: Ideal settings for spoken audio, such as the news.
[Cinema]: Ideal settings for movies.
[Game]: Ideal settings for games.
[DRAMA]: Ideal settings for drama programmes.
[SPORTS]: Ideal settings for sports.
Change picture format
You can change the picture format to suit the video source.
1.Press 
FORMAT.
2.Select a picture format, then press OK to
confirm.
The available picture formats depend on the video source:
[Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible). Recommended for minimal screen distortion but not for HD or PC.
[Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal screen distortion but not for HD or PC.
[Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not recommended for HD or PC.
[4:3]: Display the classic 4:3 format.
[Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or PC.
[Wide screen]: Stretch 4:3 format to 16:9.
[Unscaled]: Provide maximum detail for
PC. Only available when PC mode is selected in the Picture menu.
View programme guide
You can view information about digital TV channels using programme guides provided by broadcasters. This information can include:
Channel schedules for the day ('Now and next') or up to 8 days, if supported by your broadcaster
Synopsis of programmes
Note: Programme guides are available in certain countries only.
Set programme guide
Before you use the programme guide, check the following settings:
1.Press 
.
2.Select [Programme guide].
Access the TV programme guide
1.Press 
.
2.Select [Programme guide], then press
OK.
Use TV programme guide options
You can customise the displayed information to:
Remind you when programmes start
Display only preferred channels
1. In the programme guide, press
OPTIONS.
2. Select an option, then press OK:
[Set reminder]: Set programme reminders.
[Clear reminders]: Clear programme reminders.
[Change day]: Select the day to display.
[Show info]: Display programme information.
[Search by genre]: Search TV programmes by genre.
[Scheduled reminders]: List programme reminders.
[Acquire EPG data]: Update the latest programme information.
View media
What you can do
You can play videos, photos and music on your TV from a USB device connected to the TV.
Play files from USB
If you have photos, videos or music files on a USB storage device, you can play the files on TV.
Caution:
TP Vision is not responsible if the USB hard drive is not supported, nor is it responsible for damage to or loss of data in the device.
Do not overload the USB port. If you connect a USB storage device that consumes more than 500mA power, make sure that it is connected to its own external power supply.
View USB contents
1.Connect the USB device to the USB connector on the TV.
2.Press 
, select [Browse USB], then press
OK.
3.Select a file from the content browser, then press OK to start play.
4.Press the OK or 
on the remote control to control play. See Use your TV > View Media > Play options (Page 13).
Play options
Watch video
Press the Navigation buttons to select a video file, then press OKto control play.
Press 
/ 
to search backward or forward.
Press 
to exit the content browser.
Video playback options
While you play video, press 
OPTIONS to access the following video options:
[Subtitles]: Select the available subtitles settings.
[Audio language]: Select the available audio language.
EN 13
English
[Repeat]: Repeat a video, track or album.
[Show info]: Display the file name.
[Eco settings]: Select energy-saving modes.
Listen to music
Press the Navigation buttons to select a video file, then press OK to control play.
Press 
/ 
to search backward or forward within a music track.
Press 
to exit content browser.
Music playback options
Press 
OPTIONS to access or exit the following music options:
[Repeat]: Repeat a track or an album.
[Play once]: Play the track once.
[Shuffle on] / [Shuffle off]: Enable or disable random play of tracks.
[Show info]: Display the file name.
[Eco settings]: Select energy-saving modes.
View pictures
Press the Navigation buttons to select a picture, then press OK to start the slideshow.
Press Navigation buttons to search for a picture.
Press 
to exit content browser.
EN 14
Picture slideshow options
Press 
OPTIONS to access or exit the following picture options:
[Slideshow transitions]: Select the transition from one picture to the next.
[Slideshow frequency]: Select the
display time for each picture in the slideshow.
[Repeat] / [Play once]: View slideshow once or repeatedly.
[Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in the slideshow.
[Rotate image]: Rotate the picture.
[Show info]: Display the picture information.
[Set as Scenea]: Load the selected picture as the TV wallpaper. See Use more of your TV > View Scenea (Page 24).
3Use more of your TV
Professional mode
What you can do
With professional mode, you can configure this TV for commercial use. This includes:
Blocking guests from modifying the TV channels or settings
Programming the TV to switch on to a specific channel and volume
Limiting the maximum volume
Blocking specific channels
Locking buttons on the remote control
Controlling on-screen information
Note: In professional mode, most of the
mainstream features are replaced by similar features for commercial use.
Enter Professional mode
1.Press 
on the remote control.
2.Press 3, 1, 9, 7, 5, 3, 
.
The professional setup menu appears.
Switch on
1. In the professional setup menu, select
[Professional setting] > [Professional mode].
2. Use the Navigation buttons to select a setting to change, then press OK:
[On]: Switch on professional mode Hospitality features are enabled.
[Off]: Switch off professional mode The TV operates as a normal consumer TV.
3.Press 
to store all professional mode settings and exit.
4.Restart the TV
Display hotel information
To enhance hotel services, you can store and display information about your hotel on TV sets, including a:
Welcome logo
Welcome message
Hotel information page
Display a welcome screen
You can create a welcome screen with, for example, your hotel's logo.
1.Create a welcome screen in .jpeg format and save the file to a USB storage device.
2.Connect the USB storage device to the TV, then switch on the TV.
3.In the professional setup menu, select
[Welcome logo] > [USB to TV].
4.Select the file, then press OK to load the
logo.
5. Select [Welcome logo] > [Display logo]
> [On] to display the logo.
Display a welcome message
Create and display a welcome message for your guests - a welcome message can consist of up to two lines of text, each containing a maximum of 20 alphanumeric characters.
1.In the professional setup menu, select
[Welcome msg] > [Display Msg] > [On].
2.Select a setting to change:
[Line 1] / [Line 2]: Enter the content for the welcome message.
[Clear]: Clear [Line 1] and/or [Line 2].
[Message Time-out]: Set how long to display the message.
3. Press OK to display the on-screen keyboard and use the Navigation buttons to compose the welcome message.
Display a hotel information screen
Create and display a static information screen about your hotel. The information page appears as an icon in the home menu
and can also be accessed by pressing
INFO.
EN 15
English
1.Create a welcome screen in .jpeg format and save the file to a USB storage device.
2.Connect the USB storage device to the TV, then switch on the TV.
3.In the professional setup menu, select
[Hotel information] > [USB to TV].
4.Select the file to display, then press OK.
5.Select [Hotel information] > [Display information] > [On]to display the hotel
information.
To view the hotel information screen by pressing 
INFO, in the professional setup
menu, select [Hotel information] > [Info key enable] > [On].
Change professional mode settings
Professional mode settings
Use professional mode settings to speed up installation of Philips TVs for commercial use.
1.In professional setup menu, select
[Professional mode], then press OK.
2.Select a setting to change, then press OK:
[Room ID]: Set a Room ID for the TV.
[Channel setup]: Shortcut to the
channel list where you can change the order of, rename and hide channels.
[Consumer setup]: Shortcut to the full
TV menu, for example, to install all the TV settings.
[USB to TV]: Clone settings stored on
a USB storage device from another Philips TV.
[TV to USB]: Copy the current TV's
settings to a USB storage device. These settings can be cloned onto another Philips TV.
[RF to TV]: Copy settings from a Philips TV using RF signal.
[Reset]: Reset all professional mode settings to the factory default.
Channel settings
Change TV channel settings
1.In the professional setup menu, select
[Installation].
2.Select a setting to change, then press OK:
[Blank channel]: Select a channel to play audio only.
EN 16
[Auto channel update]: Automatically update channels.
[Auto software update]: Automatically update your TV software.
[Skip scrambled signals]: Enable or
disable scrambled channels in the channel list.
Pairing TVs to a remote control
Pair a maximum of four TVs to one remote control.
1. In professional setup menu, select
[Installation] > [Multi remote control], then press OK.
2 Press 
.
3. Press and hold a coloured button for more than four seconds. The coloured button is used to access the paired TV.
Note: If the batteries in the remote control
are replaced after pairing, you will need to re-perform pairing to assign a particular colour button to a TV - otherwise, use the blue coloured button to access any of the TVs.
Power settings
Customise the way the TV behaves when it is switched on.
1.In the professional setup menu, select
[Switch on setting].
2.Select a setting to change, then press OK:
[Switch on channel]: When switched
on, the TV switches to a pre-defined channel.
[Switch on vol]: When switched on,
the TV switches to a pre-defined volume.
[Max volume]: Limit the maximum volume of the TV.
[Switch on picture format]: When
switched on, the TV switches to a predefined picture format. If the source
does not support the pre-defined format, [Auto format] is enabled.
[Power On]: When switched on, the
TV switches to a customised mode:
-[On]: If the mains power is switched on, the TV automatically switches on.
-[Standby]: If the mains power is
switched on, the TV automatically
switches to standby.
- [Last status]: If the mains power is
switched on, the TV automatically switches to the last status (i.e. on or to standby).
[Smart power]: When switched on,
energy saving mode is enabled or disabled.
Control user access
You can control user access to the TV with the following features:
Lock remote control buttons
Limit access through USB, HDMI-CEC or SCART
Customise guest view
Enable Auto SCART
Use this feature to control the TV through a connected SCART device. When the SCART device is switched on, the TV automatically switches on.
1.Switch on the TV and the connected SCART device.
2.Enter the professional setup menu, select
[Control settings] > [Auto SCART] > [On]
> [Power on scart], then press OK.
Enable HDMI-CEC
If connected HDMI devices are HDMI-CEC compliant, control these devices with the
TV's remote control. For more details on how to use HDMI-CEC, see Use more of
your TV > Use EasyLink (Page 21).
1.Switch on the TV and all connected HDMI-CEC devices.
2.Press 
, select [Setup] > [TV settings] >
[EasyLink] > [On], then press OK.
3. Enter the professional setup menu, select
[Control settings] > [HDMI-CEC IN] >
[On], then press OK.
Enable or disable access to a USB storage device
1. In the professional setup menu, select
[Control settings] > [Enable USB] > [On] or [Off], then press OK.
Direct USB access
Automatically display the content of a USB storage device when the device is connected.
1. In the professional setup menu, select
[Control settings] > [USB break-in] >
[On], then press OK.
Change other control settings
1.In the professional setup menu, select
[Control settings].
2.Select a setting to change, then press OK:
[Lock KB lock]: Select [On] to lock all TV buttons except 
. Select [Off] or [All] to unlock or lock all buttons respectively.
[RC lock]: Select [On] to disable all
buttons on the remote control. Note
that you can still enter the professional setup menu by pressing 3, 1, 9, 7, 5, 3,
.
[OSD display]: Enable or disable onscreen information.
[High security]: Select [On] to restrict access to the professional setup menu.
[Enable teletext]: Select [On] to enable text.
[Enable MHEG]: Select [On] to enable MHEG channels. Applicable to UK only.
[Enable EPG]: Select [On] to enable the programme guide.
[Enable subtitles]: Select [On] to enable subtitles.
[Blue mute]: Select [On] to change the
background colour to blue when no signal is received. The default colour is black.
[Digital timeout]: Set the maximum
interval time between selection of each numeric button on the remote control.
[Selectable AV]: Select which external
sources are available when 
SOURCE is pressed.
EN 17
English
Loading...