PHILIPS 26HF5443, 26HF5443-28B User Manual

26HF5443/28 User’s Manual

Care of the screen

Do not touch the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not

Your television contains material that can be recycled and reused by specialized companies. Please find

water. The equipment should not be exposed to any dripping

ed with liquids, such

rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some
cosmet ics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes
dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone,
toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible. Their long
time contact with the screen causes deformations and color fading.

Warning concerning stationary images on the TV screen (Plasma displays)
A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a
permanent after-image to remain on the screen. This is called phosphor burn in. Normal use of the TV should
involve the showing of pictures that contain constantly moving and changing images that fill the screen.

Warning concerning VGA/HDMI display mode

As this product processes in VGA/HDMI mode, some diagonal lines may be seen under circumstances of
environmental interference. This will not affect the computer signal performance that displays in VGA/HDMI
mode.

Environmental

•

out about local regulations on the disposal of your old television set. Pay particular attention to the
disposal of exhausted batteries used in your TV Remote Control unit.

• Your television consumes energy in the stand -by mode. Energy consumption contributes to air and

water pollution. We advise you to switch off your television overnight instead of leaving it in stand -by
mode.

Wall mounting instructions/Table stand

According to the type of TV you’ve purchased a wall mount bracket and/or stand may be supplied. To mount
the supplied stand and/or wall mount bracket, refer to separate instructions. Make sure that the wall mount is
fixed securely so that it meets safety standards.

Make sure that air can circulate freely through the ventilation slots

To prevent any unsafe situations, no naked flame sources,
such as lighted candles, should be placed on or in the
vicinity. Avoid heat, direct sunlight and exposure to rain or

or splashing moisture, and no objects fill
as vases, should be placed on it. Insert the aerial plug firmly
into the aerial socket at the bottom of the TV.

Connecting the Mains

Insert the mains plug into the wall socket and switch on. Please refer to the label on the back of the television for
the correct operating voltage.

Installing the remote control

• Remove the cover at the back of the remote control.

• Insert the correct type and size batteries into the battery
compartment, making sure they are oriented correctly.

- 2 -

Switch the TV on :

Press the power switch on the TV. An indicator on the front of the TV lights up and the screen comes on.

If the TV is in standby mode (red indicator), press the - TV+ keys or the key on the remote control.

Accessing the Set-up Menu

When the set is in the High Security Mode, the Setup menu can be accessed only with an Institutional Set-up
Remote Control (RG4172BK or RC2573).

RG4172BK RC 2573
(Optional) (Optional)

Navigation

The current menu item can be selected by means of the cursor up and cursor down keys.
Submenus can be accessed from menu items with a “> ” symbol by pressing the cursor right key.

- 3 -

• To exit any menu press “Menu” button

• Select “YES” to activate/enable a setting,

“NO” to deactivate/disable.

adjusted.

GENERIC refers to a US supported

DCM. NO SOURCE SWITCH is not supported in

• Language: Select the language of the installation

menu. Options are “ENGLISH”, “FRANCAIS”,
and “ESPANOL”.

• Communication: The Communication menu is

required to enable interactive applications. For
more information consult the application notes.
For stand-alone applications select “OFF”.

• Channel Install: This sub menu allows setting the

number of television channels.

• Channel Table: Allows selection between Cable

and Antenna.

• Current Ring: This option allows selection of the

Channel Ring (from 1 to 4)

• Configuration: In the Configuration menu,

various settings and features of the TV can be

Communication: SP-SPI is SmartPort

•

communication, SP-I2C is I2C communication
from the RJ-12 connector, and HM-LINK is basic
Hotel Mode communication where the IR
commands are pa ssed directly out of the RJ-12
connector. “OFF” is used for stand-alone
applications.

• STORE : The right cursor button stores the

communication type set.

• DCM TYPE:

- 4 -

the US.

The "Input" menu item selects the desired

By pressing the left/right buttons you may enter or exit the label field; by pressing the up/down cursor

In the Channel Install sub-menu, program settings can be set . When this menu is displayed, all the protections
are inactive.

• Channel : The Channel number can be selected

with the CH+/- buttons.

• Input:

input source that will be assigned to the channel.
Possible values are TUNER, AV2, S-VIDEO,
SIDE AV, SIDE S-VIDEO, CVI-1, CVI-2 (HD­A), PC-D, PC-A, and HD-D. Some input sources
may not be available on certain sets.

• Ring 1: This menu item allows toggling between

Saved and Deleted for Channel Ring 1

• System: This menu item allows toggling between

different TV transmission systems. The options
are AUTO, NTSC, PAL-M, and PAL-N.

• Label: This menu item will be used to add a label/name for each channel.

o

you may insert alphanumeric characters.

o Pressing the Menu button lets you exit the “Label” menu item.

• Mute: This item enables/disables picture and sound for the particular channel.

o NONE: normal picture and sound enabled
o VIDEO: picture is blanked for this channel
o AUDIO: sound is muted for this channel (e.g. information channel)

• Auto Install TV: This menu item initiates the automatic frequency searching of TV channels. Inside the “Auto

Install TV” sub-menu, select Start to begin frequency searching. (*Note: In some LCD TV models, the TV screen

may go completely blank for a short period of time, or there may be some brief flashing of images on the screen, while the TV is
searching for channels to install. This is normal behaviour of the TV set. When all TV channels have been successfully stored, the
first stored channel will then be displayed).

• Ring 2/Ring3/Ring 4: This menu item allows toggling between Saved and Deleted for Channel Rings 2/3/4.

In the Configuration menu, various settings and features of the TV can be adjusted.

Switch On/OSD : In this sub -menu the behavior

•

of the TV after switching on and the behavior of
the On Screen Display can be selected.

• Picture/Sound: In this sub-menu, the Picture and

Sound settings of the TV can be selected.

• Security: In this sub-menu, the Security settings of

the TV can be configured.

• Control: In this sub -menu, the Control settings of

the TV can be configured.

• CC/V-Chip: In this sub-menu, the Close Caption

and V-Chip settings of the TV can be configured.

- 5 -