Philips 24BDL4151T-00 User Manual

PHILIPS 24BDL4151T

V1.02

www.philips.com/welcome

User Manual (English)

24BDL4151T

Safety Instructions

Safety precautions and maintenance

WARNING:Use of controls,adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your display:

Operation:

•Keep the display out of direct sunlight and away from stoves or any other heat sources.

•Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics.

•Do not block the ventilation holes on the cabinet.

•When positioning the display,make sure the power plug and outlet are easily accessible.

•When turning off the display by detaching the power cord,wait 6 seconds before re-attaching the power cord for normal operation.

•Ensure the use of an approved power cord provided by Philips at all times.If your power cord is missing,please contact your local service center.

•Do not subject the display to severe vibration or high impact conditions during operation.

•Do not knock or drop the display during operation or transportation.

•The eye bolt is for usage in short-time maintenance and installation.We suggest not to use the eye bolt for more than 1 hour. Prolong usage is prohibited.Please keep a clear safety area under the display while using the eye bolt.

Maintenance:

•To protect your display from possible damage, do not put excessive pressure on the LCD panel.When moving your display, grasp the frame to lift; do not lift the display by placing your hand or fingers on the LCD panel.

•Unplug the display if you are not going to use it for an extensive period of time.

•Unplug the display if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.

•To avoid the risk of shock or permanent damage to the set,do not expose the display to dust,rain,water or an excessively moist environment.

•If your display becomes wet, wipe it with dry cloth as soon as possible.

•If a foreign substance or water gets in your display, turn the power off immediately and disconnect the power cord.Then remove the foreign substance or water,and send the unit to the maintenance center.

•Do not store or use the display in locations exposed to heat,direct sunlight or extreme cold.

•In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the display in a location that falls within the following temperature and humidity ranges.

-- Temperature: 0-40°C 32-104°F -- Humidity: 20-80% RH

•LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.

IMPORTANT:Always activate a moving screen saver program when you leave your display unattended.Always activate a periodic screen refresh application if the unit will display unchanging static content.Uninterrupted display of still or static images over an extended period may cause“burn in”, also known as“after-imaging” or“ghost imaging”, on your screen.This is a well-known phenomenon in LCD panel technology.In most cases,the“burned in” or“after-imaging” or“ghost imaging” will disappear gradually over a period of time after the power has been switched off.

WARNING: Severe“burn-in” or“after-image” or“ghost image”symptoms will not disappear and cannot be repaired.This is also not covered under the terms of your warranty.

Service:

•The casing cover should be opened only by qualified service personnel.

•If there is any need for repair or integration, please contact your local service center.

•Do not leave your display under direct sunlight.

If your display does not operate normally,having followed the instructions set out in this document,please contact a technician or your local service center.

ii

24BDL4151T

Read and follow these instructions when connecting and using your display:

•Unplug the display if you are not going to use it for an extensive period of time.

•Unplug the display if you need to clean it with a slightly damp cloth.The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids.

•Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.

•The casing cover should be opened only by qualified service personnel.

•Keep the display out of direct sunlight and away from stoves or any other heat sources.

•Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.

•Do not block the ventilation holes on the cabinet.

•Keep the display dry.To avoid electric shock, do not expose it to rain or excessive moisture.

•When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds before re-attaching the power cable or DC power cord for normal operation..

•To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive moisture.

•When positioning the display,make sure the power plug and outlet are easily accessible.

•IMPORTANT:Always activate a screen saver program during your application.If a still image in high contrast remains on the screen for an extended period of time, it may leave an‘after-image’or‘ghost image’ on the front of the screen.This is a well-known phenomenon that is caused by the shortcomings inherent in LCD technology. In most cases the afterimage will disappear gradually over a period of time after the power has been switched off. Be aware that the after-image symptom cannot be repaired and is not covered under warranty.

EU Declaration of Conformity

This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU),Low-voltage Directive (2014/35/EU),RoHS directive (2011/65/EU),and Radio Equipment Directive (2014/53/ EU).

This product has been tested and found to comply with the harmonized standards for InformationTechnology Equipment,these harmonized standards published under Directives of Official Journal of the European Union.

ESD Warnings

When user close to the monitor may cause the equipment discharge and reboot to the display of main menu.

Warning:

This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this equipment may cause radio interference.

Federal Communications Commission (FCC) Notice (U.S. Only)

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device. To prevent damage which may result in fire or shock hazard,do not expose this appliance to rain or excessive moisture.

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

Envision Peripherals Inc.

490 N McCarthy Blvd,Suite #120 Milpitas,CA 95035

USA

iii

24BDL4151T

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU).The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU):

- EN60950-1/EN62311/EN300328/EN301893/EN301489

Europe Statement

IMPORTANT NOTE:

The device is restricted to indoor use only when operating in the 5150 to 5350MHz frequency range.

	AT	BE	BG	HR	CY	CZ	DK
	EE	FI	FR	DE	EL	HU	IE
	IT	LV	LT	LU	MT	NL	PL
	PT	RO	SK	SI	ES	SE	UK

Radiation Exposure Statement:

This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator & body.

The frequency, mode and the maximum transmitted power in EU are listed below: 2412-2472MHz(802.11g 6Mbps):19.98dBm

2402-2480MHz (EDR 3Mbps):9.65dBm

2402-2480MHz (LE 1Mbps): 9.80dBm

5180-5240/5260-5320/5500-5700MHz (802.11 acVHT40 MCS0/NSS1): 22.95dBm

Taiwan:

大功率或變更原設計之特性及功能。

並改善至無干擾時方得繼續使用。

Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Operations in the 5GHz products are restricted to indoor usage only.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

iv

24BDL4151T

Canada:

Industry Canada statement:

This device complies with RSS-247 of the Industry Canada Rules.Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu,y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

v

24BDL4151T

Polish Center forTesting and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket).All equipment that works together (computer, display, printer,and so on) should have the same power supply source.

The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.

A protection mark“B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/ E-06251.

Electric, Magnetic and Electromagnetic Fields (“EMF”)

1.We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.

2.One of our leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

3.We are committed to develop, produce and market products that cause no adverse health effects.

4.We confirm that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.

5.We play an active role in the development of international EMF and safety standards,enabling us to anticipate further developments in standardization for early integration in its products.

vi

24BDL4151T

Information for U.K. only

(B)

(A)

WARNING - THIS APPLIANCE MUST BE EARTHED. Important:

This apparatus is supplied with an approved moulded 13A plug.To change a fuse in this type of plug proceed as follows:+

1.Remove fuse cover and fuse.

2.Fit new fuse which should be a BS 1362 5A,A.S.T.A.or BSI approved type.

3.Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5A.If a plug without a fuse is used,the fuse at the distribution board should not be greater than 5A.

NOTE: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance with the following code: BLUE -“NEUTRAL” (“N”)

BROWN -“LIVE” (“L”)

GREEN &YELLOW -“EARTH” (“E”)

1. The GREEN &YELLOW wire must be connected to the terminal in the plug which is marked with the letter“E” or by the Earth symbol or coloured GREEN or GREEN &YELLOW.

2.The BLUE wire must be connected to the terminal which is marked with the letter“N”or coloured BLACK.

3.The BROWN wire must be connected to the terminal which marked with the letter“L” or coloured RED.

Before replacing the plug cover,make certain that the cord grip is clamped over the sheath of the lead - not simply over the three wires.

North Europe (Nordic Countries) Information

Placering/Ventilation

VARNING:

FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL:

SØRGVED PLACERINGEN FOR,AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMTTILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS:

SIJOITA LAITE SITEN, ETTÄVERKKOJOHTOVOIDAANTARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL:

NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.

vii

24BDL4151T

China RoHS

	(Pb)	(Hg)	(Cd)		(Cr (VI))	(PBB)	(PBDE)
	○	○	○		○	○	○
	×	○	○		○	○	○
*	×	○	○		○	○	○
	×	○	○		○	○	○
/	×	○	○		○	○	○

SJ/T 11364

*: O: GB/T 26572 X: GB/T 26572

“×” GB/T 26572 RoHS

10

( )

$

viii

							24BDL4151T
		(Pb)	(Hg)	(Cd)	(Cr+6)	(PBB)	(PBDE)
		○	○	○	○	○	○
		○	○	○	○	○	○
			○	○	○	○	○
			○	○	○	○	○
		○	○	○	○	○	○
			○	○	○	○	○
			○	○	○	○	○
			○	○	○	○	○
			○	○	○	○	○
			○	○	○	○	○
	1. ○
	2.

: :

(1)30 10

(2)2 2 1

:

, , , ,

Turkey RoHS:

Türkiye Cumhuriyeti: EEEYönetmeliğine Uygundur

Ukraine RoHS:

Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні,затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057

ix

24BDL4151T

End-of-Life Disposal

Your new Public Information Display contains materials that can be recycled and reused.Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.

Please find out about the local regulations on how to dispose of your old display from your local Philips dealer.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury.Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative)

Waste Electrical and Electronic Equipment-WEEE

Attention users in European Union private households

This marking on the product or on its packaging illustrates that,under European Directive 2012/19/EU governing used electrical and electronic appliances,this product may not be disposed of with normal household waste.You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection.To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product.

Attention users in United States:

Please dispose of according to all Local,State and Federal Laws. For the disposal or recycling information,contact:www.mygreenelectronics.com or www. eiae.org.

End of Life Directives-Recycling

Your new Public Information Display contains several materials that can be recycled for new users.

Please dispose of according to all Local,State, and Federal laws.

Restriction on Hazardous Substances statement (India)

This product complies with the“E-Waste (Management) Rules,2016” CHAPTERV, rule 16, sub-rule (1) .Whereas New Electrical and Electronic Equipment and their components or consumables or parts or spares do not contain Lead,Mercury, Cadmium,Hexavalent Chromium, polybrominated biphenyls and polybrominated diphenyl ethers beyond a maximum concentration value of 0.1% by weight in homogenous materials for lead,mercury, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers and of 0.01% by weight in homogenous materials for cadmium. except of exemptions set in Schedule 2 of the Rule.

E-Waste Declaration for India

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment .The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.

Helpline number:1800-425-6396 (Monday to Saturday, 9 a.m.to 5:30 pm)

E-mail: [e-mail]

x

24BDL4151T

	Information for EAC
	Month and year of manufacturing	please refer information in Rating label.
	Name and location of manufacturer	ООО“Профтехника”
		Адрес:3-й Проезд Марьиной рощи,40/1 офис 1.Москва,127018,Россия
		Наименование организации:ООО“Профтехника”
		Адрес:3-й Проезд Марьиной рощи,40/1 офис 1.Москва,127018,Россия
	Importer and information	Контактное лицо:Наталья Астафьева,
		[phone]
		[e-mail]

Information for FAC:

“Подтверждение соответствия Мининформсвязи России: Декларация соответствия № Д-PD-4342 от 01.09.2016 года, действительна до 01.09.2024 года,зарегистрирована в Федеральном агенстве связи 14.09.2016 года”

xi

24BDL4151T

NOTICE

SOFTWARE END USER LICENSEAGREEMENT

THIS SOFTWARE END USER LICENSEAGREEMENT (THIS“AGREEMENT”) ISA LEGALAND BINDINGAGREEMENT BETWEENYOU (EITHERAN INDIVIDUAL OR ENTITY)AND MMD MONITORS & DISPLAYS NEDERLAND B.V.,A DUTCH LIMITED LIABILITY COMPANY,WITH ITS PRINCIPAL OFFICEAT PRINS BERNHARDPLEIN 200,1097 JBAMSTERDAM,THE NETHERLANDSAND ITS SUBSIDIARY COMPANIES (INDIVIDUALLYAND COLLECTIVELY“MMD”).THISAGREEMENT GIVES YOUTHE RIGHTTO USE CERTAIN SOFTWARE (THE“SOFTWARE”) INCLUDING USER DOCUMENTATION IN ELECTRONIC FORMWHICH MAY HAVE BEEN PROVIDED SEPARATELY ORTOGETHERWITHA MMD PRODUCT (THE DEVICE”).BY DOWNLOADING,INSTALLING OR OTHERWISE USINGTHE SOFTWARE,YOUACCEPTANDAGREETO BE BOUND BYALL OFTHETERMSAND CONDITIONS OFTHISAGREEMENT. IFYOU DO NOTAGREETOTHESETERMSAND CONDITIONS,DO NOT DOWNLOAD,INSTALL OR OTHERWISE USETHE SOFTWARE.IFYOUACQUIREDTHE SOFTWARE INTANGIBLE MEDIA E.G.CDWITHOUTTHE OPPORTUNITYTO REVIEWTHIS LICENSEAND DO NOTACCEPTTHESETERMS,YOU MAY RECEIVE A FULL REFUND OFTHEAMOUNT,IFANY,THATYOU PAID FORTHE SOFTWARE IFYOU RETURNTHE SOFTWARE UNUSED WITH PROOF OF PAYMENTWITHIN 30 DAYS FROMTHE DATE OF PURCHASE.

1.Grant of License.This Agreement grants you a non-exclusive,nontransferable, non-sub licensable license to install and use, on the Device, one (1) copy of the specified version of the Software in object code format as set out in the user documentation solely for your personal use.The Software is“in use” when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk,etc.) of the Device.

2.Ownership.The Software is licensed and not sold to you.This Agreement grants you only the right to use the Software,but you do not acquire any rights, express or implied,in the Software other than those specified in this Agreement. MMD and its licensors retain all right, title, and interest in and to the Software, including all patents,copyrights, trade secrets,and other intellectual property rights incorporated therein.The Software is protected by copyright laws, international treaty provisions, and other intellectual property laws. Therefore, other than as expressly set forth herein, you may not copy the Software without prior written authorization of MMD, except that you may make one (1) copy of the Software for your back-up purposes only.You may not copy any printed materials accompanying the Software, nor print more than one (1) copy of any user documentation provided in electronic form, except that you may make one (1) copy of such printed materials for your back-up purposes only.

3.License Restrictions. Except as provided otherwise herein,you shall not rent,lease,sublicense,sell,assign,loan,or otherwise transfer the Software.You shall not, and you shall not permit any third party, to reverse engineer, decompile, or disassemble the Software, except to the extent that applicable law expressly prohibits the foregoing restriction.You may not remove or destroy any product identification,copyright notices, or other proprietary markings or restrictions from the Software. All titles,trademarks, and copyright and restricted rights notices shall be reproduced on your back up copy of the Software. You may not modify or adapt the Software, merge the Software into another program or create derivative works based upon the Software.

4.Disclaimer.THE SOFTWARE IS DESIGNEDTO ASSISTYOU INTRANSFERRING MATERIAL INWHICHYOU OWNTHE COPYRIGHT OR HAVE OBTAINED PERMISSIONTO GRAB ANDTRANSFER FROMTHE COPYRIGHT OWNER. UNLESSYOU

OWNTHE COPYRIGHT OR HAVE PERMISSIONTO GRAB ANDTRANSFER FROMTHE COPYRIGHT OWNER,YOU MAY BE VIOLATING COPYRIGHT LAW AND BE SUBJECTTO PAYMENT OF DAMAGES AND OTHER REMEDIES. IFYOU ARE UNCERTAIN ABOUTYOUR RIGHTS,YOU SHOULD CONTACTYOUR LEGAL ADVISOR.YOU ASSUME FULL RESPONSIBILITY FORTHE LEGAL AND RESPONSIBLE USE OFTHE SOFTWARE

5.Open Source Software. (a) This software may contain components that are subject to open-source terms,as stated in the documentation accompanying the Device.This Agreement does not apply to this software as such.(b) Your license rights under this Agreement do not include any right or license to use, distribute or create derivative works of the Software in any manner that would subject the Software to Open SourceTerms. “Open SourceTerms” means the terms of any license that directly or indirectly (1) create, or purport to create, obligations for MMD with respect to the Software and/or derivative works thereof; or (2) grant, or purport to grant, to any third party any rights or immunities under intellectual property or proprietary rights in the Software or derivative works thereof.

6.Termination.This Agreement shall be effective upon installation or first use of the Software and shall terminate (i) at the discretion of MMD, due to your failure to comply with any term of this Agreement;or (ii) upon destruction of all copies of the Software and related materials provided to you by MMD hereunder. MMD’s rights and your obligations shall survive the termination of this Agreement.

7.Upgrades.MMD may, at its sole option,make upgrades to the Software available by general posting on a website or by any other means or methods.Such upgrades may be made available pursuant to the terms of this Agreement or the release of such upgrades to you may be subject to your acceptance of another agreement.

xii

24BDL4151T

8.Support Services.MMD is not obligated to provide technical or other support (“Support Services”) for the Software. If MMD does provide you with Support Services, these will be governed by separate terms to be agreed between you and MMD.

9.Limited SoftwareWarranty.MMD provides the Software‘as is’and without any warranty except that the Software will perform substantially in accordance with the documentation accompanying the Software for a period of one year after your first download, installation or use of the Software, whichever occurs first. MMD’s entire liability and your exclusive remedy for breach of this warranty shall be, at MMD’s option, either (i) return of the price paid by you for the Software (if any); or (ii) repair or replacement of the Software that does not meet the warranty set forth herein and that is returned to MMD with a copy of your receipt.This limited warranty shall be void if failure of the Software has resulted from any accident,abuse, misuse or wrongful application. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer.This limited warranty shall not apply to you if the Software was provided to you free of charge on an evaluation only basis.

10.NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, MMD AND ITS LICENSORS DO NOTWARRANTTHATTHE SOFTWAREWILL OPERATE ERROR FREE OR UNINTERRUPTED, ORWILL MEETYOUR REQUIREMENTS.YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OFTHE SOFTWARETO ACHIEVEYOUR INTENDED RESULTS,AND FORTHE INSTALLATION OF, USE OF,AND RESULTS OBTAINED FROMTHE SOFTWARE. TOTHE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, MMD AND ITS LICENSORS DISCLAIM ALLWARRANTIES AND CONDITIONS,WHETHER EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITEDTOTHE IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,AND ACCURACY OR COMPLETENESS OF RESULTSWITH RESPECTTOTHE SOFTWARE ANDTHE ACCOMPANYING MATERIALS. THERE IS NO WARRANTY AGAINST INFRINGEMENT. MMD DOES NOTWARRANTTHATYOUWILL BE ABLETO DOWNLOAD, COPY, STORE, DISPLAY,TRANSFER,AND/OR PLAY SECURE CONTENT.

11.LIMITATION OF LIABILITY.UNDER NO CIRCUMSTANCESWILL MMD OR ITS LICENSORS BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGESWHATSOEVER, INCLUDING,WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER PECUNIARY LOSS, EVEN IF MMD OR ITS LICENSORS HAVE BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL MMD’S OR ITS LICENSORS’AGGREGATE LIABILITY FOR DAMAGES ARISING OUT OFTHIS AGREEMENT EXCEEDTHE GREATER OFTHE PRICE ACTUALLY PAID BYYOU FORTHE SOFTWARE OR FIVE POUNDS STERLING (5.00).

12.Trademarks.Certain of the product and MMD names used in this Agreement,the Software, and the printed user documentation may constitute trademarks of the MMD, its licensors or other third parties. You are not authorized to use any such trademarks.

13.ExportAdministration.You agree that you will not directly or indirectly,export or re-export the Software to any country for which the United States Export Administration Act,or any similar United States law or regulation requires an export license or other U.S. Government approval,unless the appropriate export license or approval has first been obtained.By downloading or installing the Software you agree to abide by this Export provision.

14.Governing law.This Agreement is governed by the laws of the Netherlands ,without reference to its conflict of laws principles. This Agreement shall not be governed by the United Nations Convention on Contracts for the International Sale of Goods,the application of which is expressly excluded.Any dispute between you and MMD regarding this Agreement shall be subject to the non-exclusive jurisdiction of the courts of the Netherlands. If for any reason a court of competent jurisdiction finds any provision, or portion thereof, to be unenforceable, the remainder of this Agreement shall continue in full force and effect.

15.General.This Agreement contains the entire agreement between you and MMD and supersedes any prior representation, undertaking or other communication or advertising with respect to the Software and user documentation. If any part of this Agreement is held invalid, the remainder of this Agreement will continue in full force and effect.This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.

xiii

24BDL4151T

Open source licenses statement

Disclaimer regarding services and/or software offered by third parties

Services and/or software offered by third parties may be changed,suspended,or terminated without prior notice. MMD does not bear any responsibility in these sorts of situations.

Third Party (Open) Source Software

This product may make use of third party (open) source software and the use of this third party (open) source software may be subject to terms and conditions of such third party. In case open source software is used,MMD provides source attribution, where applicable.When required by the terms of the open source license, MMD published the relevant parts of the source code for the product on http://licenses.cmnd.io. MMD hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source packages used in this product for which such offer is requested by the respective license.This offer is valid up to three years after product purchase to anyone in receipt of this information.To obtain the source code, please write in English to [e-mail]

You can find the detailed information in Android OSD.

Settings -> About -> Legal information -> Open source licenses

xiv

24BDL4151T

Table Of Contents

1.	Unpacking and Installation........................................................		1
	1.1.	Unpacking.........................................................................................	1
	1.2.	Package Contents........................................................................	1
	1.3.	Installation.........................................................................................	2
2.	Physical view and features........................................................		4
	2.1.	FrontView........................................................................................	4
	2.2.	RearView..........................................................................................	4
	2.3.	Input/OutputTerminals.............................................................	4
3.	Operation....................................................................................		5
	3.1.	Watch the ConnectedVideo Source...............................	5
	3.2.	Overview..........................................................................................	5
	3.3.	Media Player....................................................................................	7
	3.4.	Browser...........................................................................................	10
	3.5.	PDF Player.....................................................................................	12
	3.6.	CMND & Play.............................................................................	14
	3.7.	Custom App.................................................................................	14
4.	OSD (On-Screen Display).....................................................		15
	4.1.	Wi-Fi................................................................................................	15
	4.2.	Ethernet..........................................................................................	15
	4.3.	Bluetooth.......................................................................................	16
	4.4.	Signage Display...........................................................................	16
	4.5.	Display.............................................................................................	22
	4.6.	Apps..................................................................................................	22
	4.7.	Storage............................................................................................	23
	4.8.	Security...........................................................................................	23
	4.9.	Languages & input.....................................................................	23
	4.10.	Date & time..................................................................................	23
	4.11.	Developer options...................................................................	23
	4.12.	About...............................................................................................	23
	4.13.	Supplementary............................................................................	23
5.	Supported Media Formats.....................................................		26
6.	Input Mode...............................................................................		27
7.	Pixel Defect Policy..................................................................		28
	7.1.	Pixels and Sub-Pixels...............................................................	28
	7.2.	Types of Pixel Defects + Dot Definition.....................	28
	7.3.	Bright Dot Defects...................................................................	28
	7.4.	Dark Dot Defects.....................................................................	29
	7.5.	Proximity of Pixel Defects....................................................	29
	7.6.	Pixel DefectTolerances..........................................................	29
	7.7.	MURA..............................................................................................	29

8.	Cleaning andTroubleshooting..............................................		30
	8.1.	Cleaning..........................................................................................	30
	8.2.	Troubleshooting.........................................................................	30
9.	Technical Data..........................................................................		31
	9.1.	Specifications...............................................................................	31
	9.2.	Disclaimer......................................................................................	32

xv