Philips 241B7QPJKEB User Manual

241B7
www.philips.com/welcome
EN User manual
Customer care and warranty 26
Troubleshooting & FAQs
1
Table of Contents
1. Important �����������������������������������������������1
1.1 Safety precautions and maintenance .1
1.2 Notational Descriptions ............................3
1.3 Disposal of product and packing
material ...............................................................3
2� Setting up the monitor �����������������������5
2.1 Installation .........................................................5
2.2 Operating the monitor ..............................7
2.3 Remove the Base Assembly for VESA
Mounting .........................................................11
3� Image Optimization ���������������������������12
3.1 SmartImage ...................................................12
3.2 SmartContrast .............................................13
4� PowerSensor™ ����������������������������������14
5� Built-in Webcam with Microphone 16
5.1 PC system requirements ......................16
5.2 Using the device .......................................16
6� Daisy-chain function ��������������������������18
7. TechnicalSpecications ���������������������20
7.1 Resolution & Preset Modes .................24
8� Power Management ���������������������������25
9� Customer care and warranty ����������26
9.1 Philips’ Flat Panel Monitors Pixel
Defect Policy .................................................26
9.2 Customer Care & Warranty ...............28
10� Troubleshooting & FAQs ������������������33
10.1 Troubleshooting ..........................................33
10.2 General FAQs .............................................. 34
1. Important
1. Important
This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.
1.1 Safety precautions and maintenance
Warnings Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor.
Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the
equalizer to maximum increases the earphones and headphones output voltage and therefore the sound
pressure level.Operation
• Please Keep the monitor out of
direct sunlight, very strong bright lights and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the monitor, make sure the power plug and outlet are easily accessible.
• If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.
• Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)
• Do not subject the monitor to severe vibration or high impact conditions during operation.
• Do not knock or drop the monitor during operation or transportation.
Maintenance
• To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.
• Unplug the monitor if you are not going to use it for an extensive period of time.
• Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.
1
1. Important
• To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.
• If your monitor gets wet, wipe it with dry cloth as soon as possible.
• If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center.
• Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.
• In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
• Temperature: 0-40°C 32-95°F
• Humidity: 20-80% RH
Important information for Burn-in/ Ghost image
• Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen.
• “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application may result in severe “burn-in” or “after­image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.
Service
• The casing cover should be opened only by qualified service personnel.
• If there is any need for any document for repair or integration, please contact with your local service center. (please refer to the chapter of “Consumer Information Center”)
• For transportation information, please refer to “Technical Specifications”.
• Do not leave your monitor in a car/ trunk under direct sun light.
Note
Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed.
2
1. Important
1.2 Notational Descriptions
The following subsections describe notational conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows:
Note This icon indicates important information and tips that help you make better use of your computer system.
Caution This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem.
Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.
1.3 Disposal of product and packing material
Waste Electrical and Electronic Equipment-WEEE
This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product.
Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.
All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials.
Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative.
Taking back/Recycling Information for
3
1. Important
Customers
Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end­of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company.
Your display is manufactured with high quality materials and components which can be recycled and reused.
To learn more about our recycling program please visit
http://www.philips.com/a-w/about/ sustainability.html
4
2. Setting up the monitor
2. Setting up the monitor
241B7
*VGA
*DP
Power *Audio
*
USB
*
CD
241B7
©
2
0
1
6
K
o
n
i
n
k
l
i
j
k
e
P
h
i
l
i
p
s
N
.
V
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
U
n
a
u
t
h
o
r
i
z
e
d
d
u
p
l
i
c
a
t
i
o
n
i
s
a
v
i
o
l
a
t
i
o
n
o
f
a p
p
l
i
c
a
b
l
e
l
a
w
s
.
M
a
d
e
a
n
d
p
r
i
n
t
e
d
i
n
C
h
i
n
a
.
V
e
r
s
i
o
n
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
Monitor drivers
User’s Manual
使用
前请阅读使用说明
保留备用
2.1 Installation
Package contents
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the stand to the
VESA mount area until the latch locks the stand.
(2) Gently attach the base to the
stand.
(3) Use your fingers to tighten the
screw located at the bottom of the base, and secure the base to the stand tightly.
*Different according to region
1
2
3
Warnings
5
2. Setting up the monitor
Connecting to your PC
241B7QPJEB:
Fast Charger
10
9
6
2
3 4
7 8
1
Kensington anti-theft lock
2
Audio input
3
Earphone jack
4
Display port input
5
HDMI input
6
VGA input
7
AC power input
8
Power Switch
9
USB upstream
10
USB fast charger/USB downstream
241B7QPJKEB
7 8
1
Kensington anti-theft lock
2
Audio input
3
Earphone jack
4
Display port input
5
1
11
6
2
3 4
5
Fast Charger
10
9
1
5
HDMI input
6
VGA input
7
AC power input
8
Power Switch
9
USB upstream
USB fast charger/USB downstream
10
11
Webcam
241B7QPTEB:
Fast Charger
12
11
10
8 9
2 374 5
6
1
1
Kensington anti-theft lock
2
HDMI input
3
Display port input
4
mini Display port input
5
VGA input
6
DisplayPort output
7
Audio input, Earphone jack
8
AC power input
9
Power Switch
10
USB upstream
11
USB downstream
12
USB fast charger/USB downstream
6
2. Setting up the monitor
Connect to PC
1. Connect the power cord to the back of the monitor firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the monitor signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your monitor into a nearby outlet.
5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2.2 Operating the monitor
Description of the control buttons
241B7QPJEB,241B7QPTEB:
Change the signal input source.
Return to previous OSD level.
SmartImage
hot key
. There are 7 modes to select: Office, Photo, Movie,
Game, Economy, LowBlue Mode,Off.
241B7
6
7
Switch monitor’s power ON and OFF.
Access the OSD menu Confirm the OSD adjustment.
Adjust the OSD menu.
PowerSensor
3
1
25
4
.
7
2. Setting up the monitor
241B7QPJKEB:




 
Description of the On Screen Display
10
8
9
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below:

241B7
3
6
7
4
Switch monitor’s power ON and OFF.
Access the OSD menu Confirm the OSD
1
25
.
Basic and simple instruction on the control keys
In the OSD shown above, you can press
buttons at the front bezel of the
monitor to move the cursor, and press
OK
button to confirm the choice or
change.

adjustment.
Adjust the OSD menu.
PowerSensor
Change the signal input source.
Return to previous OSD level.
SmartImage
hot key
. There are 7 modes to select: Office, Photo, Movie,
Game, Economy, LowBlue Mode,Off.
8
Webcam activity light
9
2.0 Megapixel Webcam
10
Microphone
8
2. Setting up the monitor
The OSD Menu
Main menu Sub menu
Picture
Input
OSD Settings
Setup
Language
Color
Audio
Audio In, HDMI, DisplayPort, Mini DP (available for selective models)
PowerSensor
Picture Format
Brightness
Contrast
Horizontal
Vertical
Transparency
OSD Time Out
Auto
V.Position
Phase
Clock
Resolution Notification
Reset
Information
English, Deutsch, Español, Ελληνική, Français, Italiano, Maryar, Nederlands, Português, Português do Brazil, Polski , Русский, Svenska, Suomi, Türkçe, Čeština,
Українська, 简体中文, 繁中文,日本語,한국어
Color Temperature
sRGB
User Define
VGA
HDMI
Mini DP
SmartResponse
SmartContrast
Gamma
Over Scan
Pixel Orbiting
H.Position
DisplayPort
On
Off
Stand-Alone
Wide Screen, 4:3
0~100
0~100
0~100
0~100
Off, 1, 2, 3, 4
5s, 10s, 20s, 30s, 60s
On, Off
Yes, No
0~100
0~100
0~100
5000K, 6500K, 7500K, 8200K, 9300K, 11500K
Red: 0~100
Green: 0~100
Blue: 0~100
Off, Fast, Faster, Fastest
Off, On
1.8, 2.0, 2.2, 2.4, 2.6
0, 1, 2, 3, 4
Off, On
0~100
0~100
On, Off
On, Off
Volume
Audio Source
Mute
Off, On
(available for selective models)
DP Out Multi-Stream
Clone, Extend
Displayport
1.1, 1.2
(available for selective models)
(available for selective models)
Sharpness
0~100
LowBlue Mode
On
Off
1, 2, 3
Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
Resolution notification
This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1080 @ 60 Hz for best results.
Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
Physical Function
Tilt
241B7QPJEB,241B7QPJKEB
20
-5
241B7QPTEB
30
-5
9
2. Setting up the monitor
Swivel
241B7QPTEB
-175
Height adjustment
241B7QPJEB,241B7QPJKEB
130mm
+175
150mm
Pivot
0
90
10
Loading...
+ 28 hidden pages