• Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– cleaning the TV screen. Never use abrasive cleaning agents.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
• No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
• Do not place your TV set under direct sunlight or heat.
• Leave at least 5 cm around each side of TV set to allow for proper ventilation.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or
water.
• No objects (such as vases) filled with liquids should be placed on top the TV so as to avoid
dripping or splashing of liquids on the set.
PRECAUTION
• Do not shift or move the set around when it is switched on.
• Do not connect AC/DC adaptor to your set that does not originally comes with the set.
Only use recommended part that is approved by Philips manufacturer.
• Caution : Do not use cover or enclose the AC/DC adaptor with any objects like a cloth or
box which might shorten the life time of the equipment.
• Do not touch, push or rub the surface with hard object.
• When the surface becomes dusty, wipe gently with absorbent cotton or other soft materials
like chamois, soak with petroleum benzene. Do not use acetone, toluene and acohol as it
causes chemical damage to the polarizer.
• Wipe off saliva or water droplets as soon as possible. Long time contact with polarizar
causes deformations and colour fading.
• Be careful of condensation at sudden temperature change. Condensation does damage to
polarizar or electrical contact parts. After condensation fades, smear or spot will occur.
Recycling Directive – To minimise harm to the environment, the batteries
supplied with the TV set do not contain mercury or nickel cadmium. If possible,
when disposing of batteries, use recycling means available to you. Your TV set
uses materials which are reusable or which can be recycled. To minimise the
amount of waste in the environment, specialist companies recover used sets
for dismantling and collection of reusable materials (contact your dealer).
17/23PF9945/69 p2-6 3/13/03, 4:50 PM3
3
HOOKING UP YOUR TV (BASIC CONNECTION)
ÉÑ
Positioning of the TV set
• Place your TV set on a solid base, strong enough to
withstand the weight of the set.
• Leave a space of at least 5 cm around each side of the
ÉÑ
TV set to allow for proper ventilation.
ª Do not place TV set near a radiator or other sources
of heat.
• Do not place TV set where it can be exposed to rain
or excessive moisture.
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
Mains Connection
• Insert the mains plug into the wall socket. For correct
mains voltage, refer to type sticker at the rear of the
adaptor.
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the actual
plug and socket.
5 cm
5 cm
5cm
ÉÑ
USE/CAREOF REMOTE CONTROL
17/23PF9945/69 p2-6 3/13/03, 4:50 PM4
Switching on the Set
• Press the main power button on the top controls
to switch on/off the TV.
• If the set is on standby (indicator is red), press the
Power button on the remote control to switch on
set.
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
4
CHECKINGTHE SUPPLIED ACCESSORIES
The following accessories are supplied together with the LCD set.
V
C
R
D
V
D
MODE
æ
v
S
MAR
o
T
X
ACTIVE
M
ENU
g
C
ONTR
b
SM
OL
ART
V
k
OK
M
U
P
T
CTV
E
¬
1
4
q
P
R
2
ADIO
7
5
i
3
8
6
0
9
Remote Control2 AA BatteriesAntenna CableMains Plug
Note : This plug is not
representative of the actual
plug.
DRESSINGTHE CABLES
For better cable management, it is advisable to insert all cables through the hole of the
stand as shown in the diagram after connecting to the respective connectors. For connection
description, refer to sections on :
– Connecting the Audio/Video Sockets (Playback)
– Connecting the Audio/Video Sockets (Recording)
– Connecting to the Audio Equipment, Amplifier and Subwoofer
– Connecting to the Headphone
– Connecting to the FM Radio Mains
– Connecting the PC Equipment
– Connecting the HD (High Definition) Equipment
5
17/23PF9945/69 p2-6 3/13/03, 4:50 PM5
MOUNTING PROCEDURESFOR LCD TV
If you want to mount the LCD TV on any device, this set has four mounting interfaces fulfilling
VESA specifications.
Rear of LCD TV
Screws
Stand
1) Lay the LCD TV face-down on a flat surface with a cushion or other soft material to
protect the screen.
2) Remove all cables connected on the TV.
3) Remove the four screws and then remove the stand from the LCD TV.
4) Screw in mounting plate. Reconnect all cables to the LCD TV.
You are now ready to mount the device. Below is an example of adjusted ranges and
mounting options (VESA compatible).
Screws
17/23PF9945/69 p2-6 3/13/03, 4:50 PM6
6
CONNECTINGTHE AUDIO/VIDEO SOCKETS (PLAYBACK)
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the
AUDIO and VIDEO INPUT sockets on the rear of the TV.
Pb
FM ANT
in
Camcorder
PrY
COMP
VIDEO
INPUT
AV1
L
R
in
Audio in
VCR
Back of S-VHS VCR
Video in
– Connect the VIDEO and AUDIO IN
sockets on the rear of the LCD TV to the
AUDIO and VIDEO OUT sockets on
the VCR.
The S-Video connection on the Side of
the LCD TV is used for the playback of
S-VHS VCR tapes, Video Discs, Video
Games or Compact Disc-Interactive (cd-i)
discs. Better picture detail and clarity is
possible with the S-Video playback as
compared to the picture from a normal
antenna (RF) connection.
– Connect the S-VIDEO socket on the
side of the LCD TV to the S-VHS OUT
socket on a S-VHS VCR.
– Connect the AUDIO IN sockets from
the rear of the TV to the AUDIO OUT
sockets on the VCR. Note : You need
not connect the VIDEO IN socket of the
LCD TV if S-VIDEO IN socket is
connected.
For more convenient direct playback
connections, the Side Audio/Video Input
sockets allow for quick and easy
connections, particularly Camcorder tape
recordings.
–Connect the S-VIDEO socket (if
available) from the Camcorder to the
Side S-VIDEOsocket of the TV. You
need not connect the Side VIDEO IN
socket of the TV if the S-VIDEO socket
is connected.
–Connect the AUDIO OUT sockets
(Right and Left) from the Camcorder to
the Side AUDIO IN sockets.
DC in PC input (VGA)
Rear of TV
Rear of VCR
OUT
ANTENNA
IN
Side Controls
OUT
R
AUDIO
IN
Audio in (PC / HD)
L
HD input
R
YPbPr
Audio
out
OUT
VIDEO
IN
VCR (Equipped
with Video and
Audio sockets)
L
75
AV1
Monitor
out
OUT
L
R
AUDIO
IN
OUT
OUT
OUT
S-VIDEO
VIDEO
ANTENNA
IN
IN
17/23PF9945/69 p7-133/13/03, 4:51 PM7
7
CONNECTINGTHE AUDIO/VIDEO SOCKETS (PLAYBACK)
DVD (Equipped
with "Y", "Pb" and "Pr"
and Output sockets)
Pb
PrY
COMP
FM ANT
VIDEO
INPUT
AV1
L
R
in
Audio in
Video in
in
Pb
Y
Pr
LR
AUDIO
DC in PC input (VGA)
L
R
Audio in (PC / HD)
HD input
YPbPr
Audio
out
Monitor
75
AV1
out
You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT
sockets at the rear of the LCD TV.
– Connect the “Y”, “Pb” and the “Pr” sockets at the rear of the LCD TV to the “Y”, “Pb”
and “Pr” OUTPUT sockets of the DVD player to view playback of DVD discs.
CONNECTINGTHE A UDIO/VIDEO SOCKETS (RECORDING)
ANTENNA
OUT
ANTENNA
IN
VCR (Equipped
with Video and
Audio sockets)
OUT
IN
OUT
VIDEO
Side Sockets
VCR (Equipped
with Video and
Audio sockets)
OUT
OUT
VIDEO
R
AUDIO
IN
IN
Side Sockets
OUT
L
R
AUDIO
IN
IN
L
ANTENNA
Connection for recording from
the TV channel
–Connect the corresponding INPUT
sockets of the VCR to the MONITOROUTPUT sockets at the rear of the
LCD TV.
VCR
Connection for recording from
one VCR to another VCR
–Connect the sockets of the VCR which
OUT
OUT
OUT
L
VIDEO
R
AUDIO
IN
IN
IN
VCR 2
you want to record from, to the
corresponding sockets at AV2.
–Connect the sockets of the receiving VCR
to the MONITOR OUTPUT sockets
at the side of the LCD TV.
17/23PF9945/69 p7-133/13/03, 4:51 PM8
VCR 1
8
CONNECTINGTO THE A UDIOEQUIPMENT, A MPLIFIERAND SUBWOOFER
SUBWOOFER
SPEAKERS
L R
Side Controls
Connect the audio cable to the audio input
of your audio equipment and to AUDIO L
and R at the rear of the TV
If you have a subwoofer, connect the cable
from Subwoofer Out socket to an external
amplifier.
You can listen to your TV sound via your
audio equipment.
Note : If you want to connect more
equipment to your TV, consult your dealer.
CONNECTINGTO THE HEADPHONE
SIDE CONTROLS
(EXTERNAL 2)
Insert the plug into the headphone soket
; at the Side sockets of the LCD TV.
CONNECTINGTOTHE FM RADIO MAINS
DC in PC input (VGA)
To FM
Radio
Mains
17/23PF9945/69 p7-133/13/03, 4:51 PM9
Audio in (PC / HD)
L
HD input
R
Rear of TV
Y
Pb
Audio
out
Pr
Monitor
out
75
AV1
VIDEO
INPUT
AV1
L
R
in
Audio in
Video in
in
Pb
PrY
COMP
FM ANT
To enable you to access FM radio mode in
the TV, you must connect from FM Antenna
socket to the
FM Radio mains.
9
CONNECTINGTHE PC EQUIPMENT
To Mains
Adaptor
Rear of TV
Pb
Pr
Y
COMP
VIDEO
INPUT
AV1
L
R
in
Audio in
Video in
DC in PC input (VGA)
Audio in (PC / HD)
L
HD input
R
YPbPr
Monitor
Audio
out
FM ANT
75
AV1
in
out
To enable you to access PC mode in the TV, you must connect the following :
–Connect adaptor from DC in to the mains.
–Connect the PC input (VGA) to the Monitor Output of your PC
–Connect Audio L and R output of your PC to the Audio IN L and R of your LCD TV.
CONNECTINGTHE HD (HIGH DEFINITION) EQUIPMENT
Rear of TV
Pb
Pr
Y
L
R
in
Audio in
Video in
DC in PC input (VGA)
Audio in (PC / HD)
L
HD input
R
YPbPr
Monitor
Audio
out
75
out
VIDEO
INPUT
AV1
AV1
in
COMP
FM ANT
AUDIO VIDEO
OUTPUT
Back of DVD player
▲
OR
▼
OUTPUT
HDTV Set-Top Box
17/23PF9945/69 p7-133/13/03, 4:51 PM10
DVD (Equipped
with "Y", "Pb" and "Pr"
and Output sockets)
–Connect the “Y”, “Pb and the “Pr” sockets of the
HD INPUT at the rear of the LCD TV to the
“Y”, “Pb” and “Pr”OUTPUT sockets of the
DVD player.
–Connect Audio L and R OUTPUT of your
Set-top box to the Audio IN L and R of HD
INPUT of the LCD TV.
10
FUNCTIONSOFREMOTECONTROL
& POWER button
–Switch set off to standby mode. To switch on set from
standby mode, press Channel +/– , Digit (0 -9) or Power
button.
é MODE button/VCR and DVD indicators
Press the Mode button repeatedly to choose between VCR
or DVD mode. The VCR or DVD indicator will light up if
selected. Once VCR or DVD mode is selected, it allows you
access to the Record, Play, Stop, Pause, Forward and Rewind
functions for your VCR or DVD player. Note : The set will
switch to TV mode if there is no activity on any of the
VCR/DVD buttons after 20 seconds.
“ VCR/DVD buttons
VCR/DVD buttons allows you access to the Record, Play,
Stop, Forward and Rewind functions for your VCR or DVD
player (Applicable to only certain models of PHILIPS). For
these functions to be enabled, you must select VCR or DVD
mode by the MODE button.
‘ SLEEPTIMER button
It allows you to select a time period after which the set will
switch to standby mode automatically. (Refer to section on
“Activating the Sleeptimer”
44
(
4 / TELETEXT button
44
– When in TV mode, it allows you to switch from Stereo to Mono
sound during stereo transmission or to choose between
language5or language6during dual sound transmission.
– When in teletext mode, allows you to display dual page text.
§ SMART SOUND button
Press the Smart Sound button repeatedly to access 4 different
types of sound settings and choose your desired setting.
è MENU button
Displays the main menu. Also exits menu from screen.
! CURSOR LEFT/UP button
– Cursor Left button allows you to select the sub-menus and adjust the settings.
– Cursor Up button allows you to select the next item on the menu.
ç VOLUME + / – button
Increases or decreases volume.
0 TV button
When you are in PC, HD or FM Radio mode, press this button to enter into TV mode.
1 PC button
When you are in TV, HD or FM Radio mode, press this button to enter into PC mode.
2 INDEX/OSD button
– When in teletext mode, it functions as an Main Index button (Refer to section on
“Using the Teletext).
– When in TV mode, press to exit on-screen menu. Also displays information like
current channel number, sound mode, etc..
3 FORMAT / TIMER (VCR) button
In TV mode, it allows to select your desired screen format. Refer to section on (“Using
the Screen Format”). Also allows you timer function in VCR mode.
&
é
“
‘
(
§
è
!
ç
0
1
2
3
VCR
DVD
SMART
MENU
V
OK
PC TVHD
123
4
MODEA/CH
æ
X
ACTIVE
CONTROL
MUTE
7
i
2
v
o
g
b
SMART
k
¬
CH
RADIO
6
5
8
9
q
0
17/23PF9945/69 p7-138/15/03, 1:32 PM11
11
FUNCTIONSOFREMOTECONTROL
4 AV / TELETEXT button
–In TV mode, it allows you to select the AV channels.
–In Teletext mode, it allows to access teletext information.
(Refer to section on “Using the Teletext”)
5 PICTURE-IN-PICTURE ON/OFF button
–When in PC mode, it allows you to call up a sub-screen
within your main screen enabling you to watch a TV channel.
4
5
6
SMART
VCR
DVD
6 PICTURE-IN-PICTURE POSITION button
– When in PC mode, it allows you to position the sub-screen
MENU
to be on the top left, top right, bottom right or the bottom
left corner of your screen.
7 ALTERNATE CHANNEL button
Allows to alternate between the current channel and the
previous channel.
8 TELETEXT / HOLD button
– In teletext mode, it allows you to access teletext
information (Refer to section on “Using the Teletext”) .
– In VCR or DVD mode, it serves as a pause function for
your VCR or DVD player.
91TELETEXT button
V
25
OK
PC TVHD
123
4
7
i
Allows to access teletext mode.
20
1SMART PICTURE button
Press the Smart Picture button repeatedly to access 5
different types of picture settings and choose your desired
setting.
ACTIVE CONTROL button
21
Adjusts settings automatically for optimal picture quality under any
signal conditions (Refer to section on “Using the Active Control”)
SURROUND SOUND button
22
– Allows you to select Incredible Surround, Dolby Virtual Surround and Stereo sound when
transmission is in stereo mode.
– Allows you to select Spatial Sound or Mono sound when transmission is in mono mode.
CURSOR RIGHT / DOWN buttons
23
– Cursor Right button allows you to access the sub-menus adjust the settings.
– Cursor Down button allows you to select the next item on the menu.
CHANNEL + / – buttons
24
Allows you to select channels in ascending or descending order.
MUTE button
25
Mutes sound. To restore sound, press button again.
RADIO button
26
Allows to access radio mode. (Refer to section on “Accessing the FM Radio Installation
Menu ”)
HD (High Definition) button
27
Allows you to select the High definition mode when the “Y”, “Pb and the “Pr” sockets
at the HD INPUT at the rear of the LCDTV are connected to the to the “Y”, “Pb” and
“Pr” OUTPUT sockets of the DVD player.
DIGIT (0 -9) buttons
28
Allows you select a channel. Note : For a 2-digit number, the second digit must be
entered before the “–” sign disappears.
2
MODEA/CH
v
æ
o
g
X
SMART
ACTIVE
CONTROL
MUTE
¬
5
8
q
0
b
k
CH
RADIO
6
9
7
8
9
20
21
22
23
24
26
27
28
17/23PF9945/69 p7-135/6/03, 2:26 PM12
12
FUNCTIONSOFTVTOP CONTROLS
&é“
➩
&Mains Power buttonSwitch mains power on or off.
éVolume
“Channel
‘Remote SensorActs as a sensor for activating the controls of the
Note
• You can enter the main menu by pressing both the Volume- and+buttons at the
same time.
• Press the Channel
• Press Volume
17/23PF9945/69 p7-133/13/03, 4:51 PM13
– / + buttonsAdjust sound volume softer/louder.
– / + buttonsSelect channel in descending/ascending order.
+ or– button to select the next item on the menu.
+ or – button to access sub-menu and adjust the settings.
‘
TV when remote control handset is aimed at it.
13
ACCESSINGTHE TV MAIN MENUAND SUB-MENUS
The TV main menu allows you to access to the Picture, Sound, Features and Install menus
How to call up the main menu
Press the
The 4 buttons , , and (CursorUp, Down, Left and Right) on the remote control allow
you to select the desired menu item, make adjustments
and access the sub-menus. Use the
MENU
(MENU) button to enter the main menu.
i
(OSD) button to
• PICTURELANGUAGE
• SOUNDAUTO STORE
• FEATURESMANUAL STORE
▲
É
• INSTALLSORT
CHANNEL EDIT
exit menu from screen.
OVERVIEWOF TV MAIN MENUAND SUB-MENUS
First LevelSecond LevelThird LevelFourth Level
PICTUREBrightness
SOUNDEqualizer120Hz
Colour
Contrast
Sharpness
Colour TemperatureCool
Normal
Warm
Incredible Picture
500Hz
....... etc.
Balance
AVL
Incredible Surround
FEATURESTimerTime
Mode SelectFM Radio
Child Lock
Widescreen
17/23PF9945/69 p14-188/15/03, 1:34 PM14
Start Time
Stop Time
Channel
Activate
Display
HD
PC
14
......... OVERVIEWOF TV MAIN MENUAND SUB-MENUS
First LevelSecond LevelThird LevelFourth Level
INSTALLLanguageEnglish
B. Melayu
Auto StoreSearch
Manual StoreColour SystemAuto
Sound SystemAuto
Search
Channel
Store
Fine Tune
SortFrom
To
Exchange
Channel EditSkipped
NamePersonal
PAL
.... etc
B/G
.... etc
17/23PF9945/69 p14-188/15/03, 1:34 PM15
15
OVERVIEWOF FM RADIO MAIN MENUAND SUB-MENUS
This TV also provides you with the FM RADIO for your listening pleasure. To enable you to
access the FM RADIO mode, you must connect the cable from FM Rntenna socket to the
FM Radio mains. Press
Here is an overview of the FM RADIO Main menu and Sub-menus
First LevelSecond LevelThird LevelFourth Level
RADIO
(FM RADIO) button to enter into FM Radio mode.
SOUNDEqualizer120HZ
Balance
AVL
Incredible Surround
FEATURESTimerTime
Mode SelectTV
Screensaver
INSTALLLanguageEnglish
Auto StoreSearch
Manual StoreSearch
500HZ
....... etc.
Start Time
Stop Time
Channel
Activate
Display
HD
PC
B. Melayu
Channel
Store
SortFrom
NamePersonal
17/23PF9945/69 p14-183/13/03, 4:56 PM16
To
Exchange
16
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.