Sverige08 632 0016
UK (United Kingdom)0207 949 0069
www.philips.com/streamium
Contents
Thank you for purchasing this Philips Streamium Television set. You are the proud owner of a
Streamium LCD TV set which promises full value to you as a customer. Please read the user
manual and follow the steps and descriptions to enable you to set up your TV to access multimedia
content stored on PCs and also brings live streaming Internet entertainment to your existing TV.
Table of Contents
Important Information ......................................................................................... 3
Chapter 1 – Installing the software ...................................................................... 4
Chapter 2 – Connecting the Streamium LCD TV.............................................. 5-11
2.1 If you do not have a wireless computer network ...................................................6-7
2.2 If you already have a wireless computer network .................................................. 8-9
2.3 If you want to make a wired connection .................................................................. 10-11
Chapter 3 – Enabling broadband Internet entertainment ................................ 12-14
3.1 How does your computer connect to the Internet? ............................................. 12
3.2 Pressing the INTERNET button for the first time .................................................. 13
• Please install and connect the product in the order as described in this manual
only.
• Please read this guide carefully before using the Streamium LCD TV and keep it for
future reference.
• The most recent downloads and information on this product will be available through
our website www.philips.com/streamium.
•Broadband Internet access (min. 256 kbps) is required if you want to use the Internet
functions of the Streamium LCD TV.
• Please check whether your Internet service provider charges extra fees for exceeding
a certain limit of transferred data.
When using Internet media services on a daily basis, you may exceed such a limit.
For example: When you listen to Internet radio (at 64 kbps) for about 36 hours, 1 GB
(gigabyte) of data will be transferred to your streamium system. Watching Internet video at
700 kbps exceeds a 1 GB limit in 3 hours.
• During set-up and installation, it may be helpful to have the instructions for your TV set,
audio system and wireless base station or other wireless network components (if
appropriate) at hand.
Safety Precautions
• NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.
• Before operating the system, check that the operating voltage indicated on the nameplate
(or the voltage indication beside the voltage selector) of your system is identical with
the voltage of your local power supply. If not, please consult your dealer.
• Radio equipment for wireless applications is not protected against disturbance from
other radio services.
• The product should not be exposed to dripping or splashing.
No object filled with liquids, such as vases, should be placed on the product.
• Do not expose the system to excessive moisture, rain, sand or heat sources caused by
heating equipment or direct sunlight.
• Allow a sufficient amount of free space all around the Streamium LCD TV for adequate
ventilation.
• Do not attempt to repair the product yourself if you experience technical difficulties.
Contact your Philips retailer.
• Place the system on a flat, hard and stable surface. When the system is switched to
standby mode, it is still consuming some power. To disconnect the system from the
power supply completely, remove the AC power plug from the wall socket.
• Make sure the air around the Streamium LCD TV can circulate to prevent the set from
overheating internally. Also, avoid putting any heat sources (e.g. a power amplifier)
underneath. The Streamium TV has a thermal shutdown that shuts down the set when
the internal temperature exceeds a certain threshold. If this happens, the set switches
to standby with the Power-LED flashing on and off. To remedy this situation: disconnect
the mains, let the set cool down, improve ventilation, and reconnect the set to the
mains.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM3
3
Chapter 1 – Installing the software
Start by installing Philips Media Manager
This software enables the transfer of video, music and
photo files in your computer to your Streamium LCD TV.
1 Place the Philips Media Manager CD in your
CD or DVD’s drive and install the Philips
Media Manager software.
The CD starts automatically. If it does not, doubleclick ‘My Computer’, then the CD-ROM drive icon and
finally ‘Setup.exe’ to start the CD.
2 In the menu that appears on your computer
screen, click on ‘Install Philips Media
Manager’, and follow the on-screen
instructions.
Start the program by clicking Start > Programs > Philips
Media Manager. When opening the Philips Media
Manager for the first time, you will be asked if you
want to add a folder and scan for media files. Open a
drive or a folder with music, photos, or movies in it.
(For example: the My Documents folder, if you have
stored media files there.)
–You can always add more files and folders at a later
time.
3Adding files to the Media Manager.
Only the files that you see in the Media Manager will
be accessible from the Streamium LCD TV.
A) Click one of the media categories: Music, Photos,
or Movies.
In this example, click ‘Music’.
B) First, click the ‘Add Music’ button below the media
categories, then click ‘Add Files or Folders...’.
C) Select a folder or one or more media files and click
the ‘Open’ button to add the selected folder or files
to the Media Manager window.
>From now on, the media files you added may be
accessed from the Streamium LCD TV.
4 Opening and closing the Media Manager
window.
You can close the Media Manager window, but its icon
will remain active in the lower right corner of your
computer monitor. This icon needs to remain visible,
otherwise the TV Streamium LCD TV will not be able
to access the media files on that computer.
Double-clicking the icon opens the Media Manager
window.
23iF9946_12_StDFU_ENG.p659/6/04, 4:16 PM4
4
Chapter 2 – Connecting the Streamium LCD TV
Choose the scenario that best fits your
situation for installing the Streamium LCD
TV.
Option A: If you do not have a wireless
computer network:
In this configuration you only have a computer and a
Streamium LCD TV.
•You will install a Wireless Network Adapter on your
computer.
• Go to chapter 2.1 on page 6-7.
OR
Option B : If you already have a wireless
computer network:
In this configuration you already have a wireless computer
network and a Streamium LCD TV.
•You will check the settings of your existing wireless
computer network.
•You will adapt Streamium LCD TV to its settings to
match your network.
• Go to chapter 2.2 on page 8-9.
OR
Option C: If you want to connect a network
cable between the Streamium LCD TV and
your PC or wired network:
In this configuration, the Streamium LCD TV and the
computer come with a free ethernet connector (or a wired
network with a free ethernet connector).
•You will be connecting an Ethernet network cable
between the Streamium LCD TV and your computer
or wired network.
• Go to chapter 2.3 on page 10-11.
5
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM5
Installing
2.1 If you do not have a wireless computer
network
Option A
In this configuration you only have a computer and the
Streamium LCD TV.
•You will install a Wireless Network Adapter on your
computer. At the end, you will be able to send music,
movies, and pictures from your computer to your
Streamium LCD TV.
1 Install a Wireless Network Adapter (not
included, you will have to buy one separately,
e.g. the Philips CPWUA054.)
See the separate instructions of the Wireless
Network Adapter on how to install the
adapter on your PC.
Note: Choose ‘Ad-Hoc’ as your network type during
installation, and set your wireless network name (SSID).
After the Wireless Network Adapter has been installed
successfully, continue below.
2 Make sure the Philips Media Manager you
installed in chapter 1 is active.
Double-click the Media Manager icon in the lower right
corner of your monitor OR click Start / Programs /
Philips Media Manager. Leave the Media Manager
window open to be sure it is active.
3 Switch on the Streamium LCD TV.
Press the SELECT button repeatedly until STREAM
indicator is lighted up.
4Pressing the HOME LINK button on the
remote control.
Do not press the INTERNET button at this time, only
the HOME LINK button.
> After about five seconds, a ‘Streamium’ welcoming
message appears on the television screen.
to use...
ow
H
I
n
D
s
t
C
a
l
l
n
a
o
t
i
1
2
5 If asked, select from the list of wireless network names
(SSID) presented to you on the TV screen. Use the
navigation buttons Cursor Up /Down on the remote
control to select the network name to use and press
OK button to confirm.
Note: If there is only one wireless network available, it
will be selected for you and you will not be asked to
select one.
> After about 30 seconds, you will see the PC Link menu
appear on your TV screen. If you see the text ‘Philips
Media Manager’ appear on your TV screen, the
installation has succeeded. Should the PC Link menu
stay empty, see the ‘Problem solving’ section on page
19-21.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM6
6
Installing
6 Explore the Home Link menu on the TV
screen.
Use the navigation buttons (Cursor Left/Right/Up/
Down) and the OK button on the remote control to
explore the multimedia content you made available
on your PC.
For example: press the Cursor Right button on the remote
control several times until you have selected a musictrack, a photo or a movie, and press OK button to play
it on your television...
Have fun!
7How to enable INTERNET (For playing
Internet Radio, Movie Trailers, etc., on your
Streamium LCD TV.)
See the section on ‘Enabling broadband Internet
entertainment’ on page 12-14 for information on how
to make your broadband Internet connection (provided
you have one) available to the Streamium LCD TV.
If you encounter problems during installation
or should you need additional help, then:
a) see Problem solving on page 19-21, or
b) visit our website www.philips.com/streamium, and
click on Support and FAQs, or
c) contact our help-line.
Tip: Enable the encryption key to secure your
wireless computer network from intruders.
Philips advises you to set an encryption key to secure
your wireless network. Please, read the text on
‘Securing your wireless network’ on page 33 in the
extended version of the User Manual on the CD-ROM.
INTERNET
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM7
7
Installing
2.2 If you already have a wireless computer
network
Option B
In this configuration you already have a wireless computer
network, and the Streamium LCD TV.
•You will check the settings of your existing wireless
computer network.
•You will connect the Streamium TV and adapt its
settings to match your network. At the end, you will
be able to send music, photos, and movies from your
computer to your Streamium LCD TV.
1 Check your existing wireless network settings
so you are able to enter them in STEP 4 of
this procedure.
Find out the wireless network name (SSID) and the
encryption key you used for securing your wireless
network.
Wireless Network Name (SSID):
Usually, you can find the wireless network name in the
options menu of your Wireless Network Adapter or
Wireless Base Station. To check this, open the program
that came with your network adapter.
Encryption key:
The wireless encryption key is a 64 or 128 bit WEP
code that secures your wireless network
communications.
– 64-bit: 5 characters ASCII, or 10 characters HEX, or
– 128 bit: 13 characters ASCII, or 26 characters HEX.
Note : The encryption key is case sensitive, meaning
that ‘ABC’ is not the same as ‘aBc’. Always input
characters in the correct case to avoid problems.
Basically, you will have to try and remember what you
set it to. If you cannot remember the encryption key,
you will either have to disable it completely for your
entire wireless network, or set a new one that you
can remember.
2 Make sure the Philips Media Manager you
installed in chapter 1 is active.
An icon will appear at the bottom right hand corner
of screen.
3 Switch on the Streamium LCD TV.
Press the SELECT button on the remote control
repeatedly until STREAM indicator is lighted up.
4Pressing the HOME LINK button on the
remote control.
Do not press the INTERNET button at this time, only
the HOME LINK button.
> After about five seconds, a ‘Streamium’ welcoming
message appears on the television screen.
Check the:
NETWORK NAME (SSID)
...............
and
ENCRYPTION KEY
...............
of your wireless network
1
2
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM8
8
Installing
5 Select your wireless network name, and input
the encryption key you found in step 1.
A) If asked, select the wireless network name from
the list of wireless network names (SSID) presented
to you on the TV screen.
Use the navigation buttons (Cursor Up/Down) on
the remote control to select the correct network name
and press OK button to confirm.
Note : If there is only one wireless network, it will be selected
for you and you will not be asked to select one.
B) If asked, also input the encryption key.
Use the navigation buttons (Cursor Left/Right/Up/
Down) on the remote control to choose your type
of encryption and to input the key itself. Press OK
button to confirm.
Please remember that the encryption key is case
sensitive, meaning that ‘ABC’ is not the same as ‘aBc’.
Always input characters in the correct case to avoid
problems.
Note : If the wireless network is not encrypted, you will not
be asked to input an encryption key.
> After about 30 seconds, you will see the PC Link
menu appear on your TV screen.
If you see the text ‘Philips Media Manager’ appear on
your TV screen, the installation has succeeded.
6 Explore the PC Link menu on the TV screen.
Use the navigation buttons (Cursor Left/Right/Up/
Down) and the OK button on the remote control to
explore the multimedia content you made available
on your PC.
For example: press the Cursor Right button on the
remote control several times until you have selected a music
track, a photo or a movie, and press OK button to play
it on your television...
Have fun!
7How to enable INTERNET (For playing
Internet Radio, Movie Trailers, etc., on your
Streamium LCD TV.)
See the section on ‘Enabling broadband Internet
entertainment’ on page 12-14 for information on how
to make your broadband Internet connection (provided
you have one) available to the Streamium LCD TV.
If you encounter problems during installation
or should you need additional help, then:
a) see Problem solving on page 19-21, or
b) visit our website www.philips.com/streamium, and
click on Support and FAQs, or
c) contact our help-line.
INTERNET
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM9
9
Installing
2.3 If you want to make a wired connection
Option C
In this configuration your Streamium LCD TV and
computer already have a free ethernet connector (or a
wired network with a ethernet connector).
•You will be connecting an Ethernet network cable
between the Streamium LCD TV and your computer
or wired network.
•You will be able to send music, photos, and movies
from your computer to your Stremium TV.
Ethernet ports and cables look just like telephone
connections and lines, but are thicker and wider.
Ethernet (RJ-45) connectors have eight contacts,
whereas standard telephone line (RJ-11) connectors
have four or six.
Important: only use CAT.5 shielded Ethernet
cable (STP).
1a Use a crossover Ethernet cable if you want to
connect the Streamium LCD TV directly to
your computer.
In a crossover Ethernet cable, the arrangement of the
coloured wires changes between the two ends.
– Push one end of the Ethernet cable into the
connector on the back of the Streamium LCD TV.
– Push the other end into the Ethernet connector of
your computer.
Note : Your computer needs to have an Ethernet connector
available.
Ethernet port required
OR
1b Use a straight-through Ethernet cable if you
want to connect the Streamium LCD TV to
an existing computer network.
In a straight-through Ethernet cable, both ends have
the same arrangement of coloured wires.
– Push one end of the Ethernet cable into the
connector on the back of the Streamium LCD TV.
– Push the other end into a free Ethernet connector
on your central network device, like a hub, switch or
router.
Note : Your network needs to have an Ethernet connector
available.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM10
Network hub
10
Installing
2 Make sure the Philips Media Manager you
installed in chapter 1 is active.
Double-click the Media Manager icon in the lower right
corner of your screen or click Start / Programs / Philips
Media Manager.
Leave the Media Manager window open to be sure it
is active.
3 Switch on the Streamium LCD TV.
Press the SELECT button repeatedly until STREAM
indicator is lighted up.
4Pressing the HOME LINK button on the
remote control.
Do not press the INTERNET button at this time, only
the HOME LINK button.
> After about 30 seconds, you will see the PC Link menu
appear on your Streamium LCD TV screen.
If you see the text ‘Philips Media Manager’ appear on
your Streamium LCD TV screen, the installation has
succeeded.
5 Explore the PC Link menu on the TV screen.
Use the navigation buttons (Cursor Left/Right/Up/
Down) and the OK button on the remote control to
explore the multimedia content you made available
on your PC.
For example: press the Cursor Right button on the remote
control several times until you have selected a music track,
a photo or a movie, and press OK button to play it on
your television...
Have fun!
6How to enable INTERNET (For playing
Internet Radio, Movie Trailers, etc., on your
Streamium LCD TV.)
See the section on ‘Enabling broadband Internet
entertainment’ on page 12-14 for information on how
to make your broadband Internet connection (provided
you have one) available to the Streamium TV.
1
2
If you encounter problems during installation
or should you need additional help, then:
a) see Problem solving on page 19-21, or
b) visit our website www.philips.com/streamium, and
click on Support and FAQs, or
c) contact our help-line.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM11
INTERNET
11
Chapter 3 – Enabling broadband Internet entertainment
If you have a broadband Internet connection (minimum
256 kbps), you can stream Internet radio stations and
movie trailers live from the Internet to the Streamium
LCD TV. Broadband internet also provides the on-line
upgrades for the Streamium LCD TV. The Internet
entertainment offering is constantly being improved and
new functions are added. Visit www.philips.com/streamium
for the latest possibilities.
3.1 How does your computer connect to
the Internet?
Option A: With a wired broadband Internet
connection
If you have a PC with a wired broadband Internet
connection, you will have to make that Internet connection
available to the wireless (or wired) network. To do this,
install router/gateway software on the PC for bridging the
broadband Internet connection to the wireless or wired
network. As an example we have included a chapter on
page 38-41 on the Philips Media Manager CD on how to
enable Internet Connection Sharing from your Microsoft
Windows®operating system. For Microsoft®and other
operating systems, third party router/gateway software is
readily available on the market. For more information on
sharing an Internet connection, read the documentation
that came with the software or with your operating system.
> After bridging the internet connection to your wireless
(or wired) network, you will be able to access the Internet
just like your computer. Wireless base stations (and wired
internet gateway routers) share their broadband Internet
access automatically within the network.
®
INTERNET
This applies to both a
wired and a wireless
connection between
your PC and the
Streamium TV.
OR
Option B: Through a wireless base station
Wireless base stations (and wired internet gateway
routers) share their broadband Internet access
automatically within the network.
> The Streamium LCD TV will be able to access the
Internet just like your other wireless or wired network
computer(s).
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM12
INTERNET
This also applies to a wired
connection between your
internet gateway router
and the Streamium TV
12
Enabling broadband Internet entertainment
3.2 Pressing the INTERNET button for the
first time
1 First, check whether HOME LINK functions correctly.
Start the Philips Media Manager program on your
computer, and press the HOME LINK button on the
remote control. See if the text ‘Philips Media Manager’
appears on your television screen.
2 Then, check whether the PC on which you are running
Philips Media Manager has Internet access by opening
a website on the Internet with your Internet browser
program (e.g. www.philips.com).
3 Next, press the INTERNET button to start streaming
audio and video from the Internet to your Streamium
LCD TV.
> You will be asked to register for the free Internet
services. See next chapter on how to register.
Note: Internet services will only be available if you register.
3.3 Registration (for free Internet services)
When the Streamium LCD TV connects to the Internet
for the first time, or after you have reset all menu settings,
the Streamium TV will ask you to register your email
address. Also, each new user you add will have to register
an email address.
1 Use the Cursor (Up/Down/Right) keys on your
remote control to enter your email address. If you
mis-typed, press Cursor Left button to delete the
character you have entered. Next, press OK button
to send your email address to My.Philips.
(See also: Chapter 8 - Entering or editing information)
Alternatively, use SMS TEXT-style keys for inputting
your email address. SMS TEXT-style entry can be used
to enter alphanumeric information. In this mode, text
is entered by a method similar to that used for entering
text messages on a cellular telephone.
For example: pressing the ‘2’ key several times will cycle
through the following characters : a – b – c – A – B – C –
2... etc
RC KeySMS-style alphanumeric entry order
1_ - 1 _ - 1 (etc.)
2a b c A B C 2 a b c (etc.)
3d e f D E F 3 d e f (etc.)
4g h i G H I 4 g h i (etc.)
5j k l J K L 5 j k l (etc.)
6m n o M N O 6 m n o (etc.)
7p q r s P Q R S 7 p q r s (etc.)
8t u v T U V 8 t u v (etc.)
9w x y z W X Y Z 9 w x y z (etc.)
0.@ 0 .@ 0 (etc.)
Tip : The dot, and the @ sign, are under the 0 key. The
space, hyphen, and underscore, are under the 1 key.
Note : Within a short time, you will receive an email with
instructions on how to create an account at my.philips.com.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM13
13
Enabling broadband Internet entertainment
You will need to go to your PC to perform
Steps 2 to 4
2 From your PC, double-click the website address that
is in the email.
3 Fill in the requested data to create an account.
4 After registration you can access the INTERNET
service of the Streamium LCD TV and you can manage
your user account at ‘my.philips.com’ by opening this
website in your Internet browser program or by
clicking the My.Philips button in Philips Media Manager.
Note : Make note of your password, as you will need it if
you want to re-register after resetting the service of the
Streamium LCD TV or if you want to access the Internet
later.
5 After creating a My.Philips account, proceed to the
Streamium LCD TV and press the INTERNET button
again.
> The Streamium LCD TV will require you to enter the
email address.
Enter your password and press the red button on the
remote control.
If you forget your password :
Press the green button on the remote control.
> An email will be sent to your email address. Check
your email and follow the instructions to change
your password.
> The Streamium LCD TV will now have access to the
Internet services of your My.Philips account.
Have fun!
14
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM14
Chapter 4 – Using the Streamium LCD TV
This Streamium LCD TV either connects to your wireless
home network (HOME/PC LINK) and plays music, photos,
and movies stored on your PC(s), or to the Internet
(INTERNET) for accessing various Internet Entertainment
services (e.g. internet radio, movie trailers…).
Note: Install the Philips Media Manager software, the Wireless
Network Adapter (or wired connection), before you attempt to
use the Streamium LCD TV. Also, make sure the Philips Media
Manager icon is present in the lower right corner of your
computer screen. Internet services require a broadband Internet
connection.
IMPORTANT : Before you start using your
Streamium LCD TV for Streamium
functions or other functions, ensure the
RIGHT MODE must be selected.
Switching from TV/FM Radio/PC mode to
Streamium mode :
–Press the SELECT button on the remote control
repeatedly until the indicator is lighted up at STREAM.
–Press the HOME LINK button to access the PC Link
menu on your Streamium TV screen.
1
STREAM Indicator
must be lighted up.
2
Switching from Streamium mode to TV
mode :
–Press the SELECT button on the remote control
repeatedly until the indicator is lighted up at TV.
–Press the TV button to return to TV mode to view
programmes on your Streamium TV screen.
Switching from Streamium mode to FM
Radio mode :
–Press the SELECT button on the remote control
repeatedly until the indicator is lighted up at TV.
–Press the RADIO button to enter into FM Radio mode.
You can now proceed to use your Streamium LCD TV
as a radio for your listening pleasure. See the TV UserManual’s section on “Using the Streamium LCD TV
as a FM Radio”.
Switching from Streamium mode to PC
mode :
–Press the SELECT button on the remote control
repeatedly until the indicator is lighted up at TV.
–Press the PC button to enter into PC mode. You can
now your Streamium TV as a PC monitor. See the TVUser Manual’s section on “Using the Streamium LCD
TV as a PC Monitor”.
1
TV Indicator must
be lighted up.
2
1
TV Indicator
must be lighted up.
2
1
TV Indicator must
be lighted up.
2
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM15
15
Using the Streamium LCD TV
4.1 INTERNET
With INTERNET you can make the Streamium TV play
media files (music, photos, movies…) and start other
services from the Internet.
1Press the INTERNET button* on the remote
control to open the Navigation View on your
TV screen.
* When the Streamium LCD TV connects to the Internet for
the first time, and after resetting, the Streamium LCD TV
will prompt you to register.
See the chapter Enabling broadband Internet
entertainment on pages 12-14.
2 Use the navigation buttons (Cursor Left/Right/Up/
Down) and the OK button on the remote control to
explore the available Internet services.
For example: press the Cursor Right button on the remote
control several times until you have selected a music track,
a photo or a movie, and press OK button to play it on
your television...
Please, see Basic navigationon page 17 for an explanation
of the navigation and control functions.
4.2 HOME LINK
With HOME LINK you can make the Streamium LCD TV
play media files (music, photos, movies…) that are stored
on your PC or a centralised storage such as a Ehub.
1 Press the HOME LINK button on the remote control
to open the Navigation View on your TV screen.
2 Use the navigation buttons (Cursor Left/Right/Up/
Down) and the OK button on the remote control to
explore the multimedia content you made available
on your PC.
For example: press the Cursor Right button on the
remote control several times until you have selected a music
track, a photo or a movie, and press OK button to play it
on your television...
Please, see Basic navigationon page 17 for an explanation
of the navigation and control functions.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM16
16
Chapter 5 – Basic navigation
This is the basic way of navigating through all the menus.
1 Press INTERNET or HOME
LINK button on the remote
control.
2 The available media sources
and services will appear on
the TV screen.
3 The little yellow arrows
around the highlighted bar
indicate which arrow buttons
you can press to navigate
through the menus on the
television screen.
4 Press Cursor Up or Cursor
Down to make a selection.
Next, press Cursor Right or
OK button to confirm.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM17
5 If colour coded user options
appear on the TV screen,
press the matching colour
button to use that option.
17
Additional information
Environmental information
All redundant packing material has been omitted.We have done our utmost to make the packaging easily separable into
three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your
set consists of materials that can be recycled if disassembled by a specialised company. Please observe the local regulations
regarding the disposal of packing materials, exhausted batteries and old equipment.
Disclaimer
This product is provided by Philips ‘as is’ and without any express or implied warranty of any kind of warranties,
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed.
In no event shall Philips be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including,
but not limited to, procurement of substitute goods or services; loss of information, data, or profits; or business interruption)
howsoever caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or
otherwise) arising in any way out of the use or inability to use this product, even if the possibility of such damages has
been mentioned. Philips further does not warrant the accuracy or completeness of the information, text, graphics, links
or other items transmitted by this product.
Upgradeability
Both the Streamium TV and the Philips Media Manager software are upgradeable through your broadband Internet
connection. From time to time, new features will be available and the functionality of this system will change. Therefore,
this manual can only offer a rough overview of the internet and PC Link functionality. Please visit www.philips.com/
streamium for the latest information on the availability of services and new functions.
Trademarks
All trademarks acknowledged. Microsoft and Windows are trademarks, or registered trademarks of Microsoft Corporation
in the United States and/or other countries. Mac OS is a trademark of Apple Computer, Inc., registered in the U.S. and
other countries. DivX® is a registered trademark of DivXNetworks, Inc. All other brands and product names are
registered trademarks of their respective owners.
Statements
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
• This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to
the following two conditions:
1) this device my not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation.
• The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that
changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Example : Warning: Changes or modifications made to this equipment not expressly approved by Philips may void the FCC
authorization to operate this equipment.
IMPORTANT NOTE
FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter.
18
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM18
Chapter 6 – Problem solving
6.1 Audio/video problems
Check the Support section on www.philips.com/streamium for the latest information on problem solving.
Problem
Power light does not light
up and/or the Streamium
LCD TV cannot be
switched on.
No display on the TV
screen.
No sound from the
speaker.
Intermittent video play.
No photo, music, or
video play
The menu displayed on
the television screen
disappears after a few
minutes.
The remote control does
not remote function
properly.
Error message appears
when installing the Philps
Media Manager.
Possible cause
• No connection to mains
power.
• TV is switched off.
•Volume too low.
• Not enough bandwidth
available for the requested
video quality.
• Incompatible codec (media
format).
• Correct codec, but still low
quality.
• Firewall software blocks
streaming.
• After a set amount of time, a
screen saver will become
active to prevent TV screens
from burning in.
•Wrong mode.
•Weak batteries.
Solution
Connect the power adapter to the Streamium LCD
TV and to a mains outlet that provides electrical
power.
Switch on your TV.
Increase volume or switch off mute of your
Streamium LCD TV.
Select a lower video quality by pressing the green
button on the remote control one or more times.
Lower video quality requires less bandwidth and
should play with less interruptions.
Comply with the supported codecs. Go to
www.philips.com/streamium to see which codecs
are currently supported.
Most PC media formats use heavy data compression
video/audio techniques that lower the video/audio
quality, e.g. compared to DVD/CD. Lower quality
display is normal.
Disable firewall software to test whether it
interferes with streaming video and audio. Go to
www.philips.com/streamium to see what ports
you need to open for streaming (42951 TCP and
42591 UDP)
Press the MENU button on the remote control,
select Preferences > Screen Saver, and set a longer
time-out for the screen saver.
Ensure the right mode is selected. STREAM mode
must by selected if you are accessing the streaming
fuctions and TV mode if you are watching TV
programmes.
Replace the batteries.
Re-install the Philips Media Manager and reboot the
PC after installation.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM19
19
Problem solving
6.2 PC / Network problems
Check the Support section on www.philips.com/streamium for the latest information on problem solving.
Problem
The Installation CD will
not start.
The software will not
install.
No wireless connection
or intermittent drop-out
of the wireless
connection.
Pressing the PC LINK
button produces an
empty content screen on
your television.
Possible cause
• Autorun disabled for your
drive.
•Wrong operating system.
• Wireless signal range, speed,
and strength can be affected
by interference from
neighbouring wireless
networks and devices.
Electro-magnetic devices
such as televisions, radios,
microwave ovens, and
cordless telephones,
especially those with
frequencies in the 2.4 GHz
range, may also interfere
with wireless transmission.
• PC is switched off.
• The Media Manager
software is not running.
• No wireless network
adapter connected or range
too long (weak radio signal).
• Network host (PC) or
wireless station base is
switched off.
•Your Wireless Base Station/
network router employs
MAC filtering and prevents
the Streamium LCD TV
from connecting to your
network.
• Not enough USB bandwidth
available for a wireless USB
adapter.
• Radio interference from
other (wireless) devices.
• (Wireless) network
problems.
• No files were added in the
Philips Media Manager.
• Media format not supported
Solution
Double-click ‘My Computer’, then the CD-ROM
drive icon and finally ‘Setup.exe’ to start the CD.
Go to www.philips.com/streamium to see which
operating systems are supported.
Switch off wireless devices that interfere with your
wireless network connection.
Place the wireless access point as high and centrally
as possible to improve signal strength.
Switch on your PC.
Start the Media Manager software.
Connect the wireless network adapter to your PC
or reposition your Wireless adapter.You may check
the link quality by pressing the MENU button and
selecting Network > Wireless Info > Signal Level.
Make sure your home network is operational before
you try to contact a networked computer with the
Streamium LCD TV.
Add the Streamium LCD TV MAC address to the
list of devices that may connect to your Station/
Gateway router. See the user manual that came with
your Station/Gateway router for instruction on how
to do this. Press the MENU button and select:
Network > Wireless Info> NIC MAC Address to
see the wireless MAC address.
If you share the USB bandwidth with other heavy
USB bandwidth users (like USB cameras, scanners
or ReWritable drives, etc.), the remaining bandwidth
may not be enough.
Check whether a wireless connection can be
established with other devices switched off (e.g.
microwave ovens, other wireless devices, etc.)
See advanced network problem solving on page 4142 of the User Manual.
Check that files have been added using the Philips
Media Manager.
Go to www.philips.com/streamium to check for the
latest information on supported format.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM20
20
Problem solving
Problem
Pressing the INTERNET
button produces an
empty content screen on
your television.
New features as
advertised on the
Internet are not available.
Internet radio/video
services are slow or do
not respond.
It says ‘System Recovery’
on the content screen
on my TV screen, and I
am asked to press
‘Continue’. What’s
wrong?
Possible cause
• Check whether the
Streamium TV can connect
to your PC.
• No broadband Internet
connection available.
• Not enough broadband
Internet bandwidth available.
• Network host (PC) or
wireless base station is
switched off.
• Internet access not working.
• Internet Connection Sharing
(ICS) is not working.
• Internet or network
problems.
•You are using an older
software version that does
not have those features.
•Your Internet bandwidth
might be (temporarily) too
low.
• The internal memory of the
Streamium LCD TV has
been corrupted e.g. during
downloading new software
from the Internet and it
needs to start the
emergency bootloader
program that connects to
the Internet to restore the
Streamium LCD TV to a
working state automatically.
21
Solution
First, please check whether the Streamium LCD
TV connect to a PC by pressing the PC LINK button.
If not, see above.
Broadband Internet means at least a 256 kbps
always-on Internet connection. Dial-up ISDN/
telephone connections will not work.
If you share the broadband bandwidth with other
users as it may fall below the minimum
requirements.
Make sure your home network is operational before
you try to connect a networked computer with
the Streamium LCD TV.
Make sure you can access the Internet from your
computer.
In this manual, read the chapters on networking.
Alternatively, visit www.microsoft.com, click
Support, and search on ‘ICS’.
See advanced network problem solving on page 42
of the User Manual.
Upgrade the Streamium LCD TV and the software.
Upgrade the Steamuim TV by pressing the MENU
button. Then select Online Upgrade. Go to
www.philips.com/streamium for the latest version
of the Media Manager software.
Check for Internet congestion. Do not download
large files while listening to Internet radio or viewing
movies.
Firewall software and Anti-Virus software may
diminish the bandwidth effectively available to your
PC.You may test whether this is the case by disabling
the software temporarily.
Press the red button on the remote control to the
emergency bootloader.
1. It will try to recover as many of the existing
settings as possible for to your wireless network
and the Internet.
2. If it cannot recover any wireless settings, you will
be asked to connect the Streamium LCD TV with
an Ethernet cable to your Internet gateway router
or PC with Internet access.
3. It will ask you for any additional settings it needs
to connect to the Internet. See the chapter about
the Options menu on page 28-31 for reference.
4. Once the emergency bootloader has been able
to connect to the Internet and has downloaded a
valid software version, it will display ‘Restarting
system...’. The Streamium TV should be working
again. If not, check your settings by pressing the
MENU button.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM21
Chapter 7 – Remote Control
7.1 Functions of Remote control buttons for Streamium functions.
Note : For functions of the TV, explanation is done in another section.
& Power/standby button
–Switches Streamium LCD TV off (to standby).
–Switch on the Streamium LCD TV with the
INTERNET or HOME LINK button.
é Playback control buttons
Playback (Play/Pause/Previous/Next) functions for
multimedia content.
“ Coloured menu buttons
For selecting or activating the colour-coded
option from the on-screen menu.
‘ INTERNET source button
–Selects the Internet as your source of multimedia
content.
–Requires a broadband Internet access of minimum
256 kbps, higher recommended.
( Menu navigation buttons: up/down/left/
right/OK
Used for navigating through menus and for making
choices.
&
é
“
‘
(
§
è
!
0
1
2
3
§ MENU
Accesses the Streamium menu settings.
è VOLUME + / – buttons
Increase or decrease volume.
! SHUFFLE (Home Link only)
Selects the shuffle mode.
ç Number/Text buttons
For inputting numbers and SMS-style TEXT.
0 SELECT mode button
Allows you to select TV, DMR or STREAM
mode.
1 HOME LINK source button
Selects HOME LINK as your source of multimedia
content.
2O K/Play button
Confirms selection and start playing content.
3 REPEAT button (Home Link only)
Selects the repeat mode.
ç
22
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM22
Remote Control
7.2 Using the remote control
Do the following steps to ensure that your remote control
is ready for operation.
1 Pull out the plastic insulation sheet from the battery
to enable the remote control to function.
2 Pull out battery cover and check whether the lithium
battery is placed correctly. The words on the battery
should face you when you remove the battery cover.
3 Insert battery cover and the remote control is now
ready for use.
Note : the battery supplied with the set does not contain
mercury or nickel cadmuim so as to protect the environment.
When discarding your batteries, use the recycling options
available.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM23
23
Chapter 8 – Entering or editing numeric and text information
You can enter numbers and text into the Streamium LCD
TV in several ways:
Navigation keys
On the TV screen, arrows are displayed above and below
the character being entered or edited and that character
is shown in a different colour.
1 Press Cursor Up or Down button to browse through
the characters available.
Note: there are two sets of characters to browse through,
uppercase and lowercase characters.
2 Press Cursor Left or Right to go to the next or previous
character.
3 Press OK or the green colour key to accept the entry.
Press u to cancel the entry and go back to the previous
menu screen.
Direct number key entry
You may input numbers by direct key input from the
remote control. Just press the number keys for the number
you need.
SMS TEXT-style keys
SMS TEXT-style entry can be used to enter alphanumeric
information. In this mode, text is entered by a method
similar to that used for entering text messages on a cellular
telephone.
For example: pressing the ‘2’ key several times will cycle through
the following characters : a – b – c – A – B – C – 2... etc
RC KeySMS-style alphanumeric entry order
1_ - 1 _ - 1 (etc.)
2a b c A B C 2 a b c (etc.)
3d e f D E F 3 d e f (etc.)
4g h i G H I 4 g h i (etc.)
5j k l J K L 5 j k l (etc.)
6m n o M N O 6 m n o (etc.)
7p q r s P Q R S 7 p q r s (etc.)
8t u v T U V 8 t u v (etc.)
9w x y z W X Y Z 9 w x y z (etc.)
0.@ 0 .@ 0 (etc.)
Notes: Some text input is case sensitive, meaning that ‘ABC’ is
not the same as ‘aBc’. Always input characters in the correct
case to avoid problems.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM24
24
Chapter 9 –
Advanced navigation and advanced Streamium functions
9.1 Navigation view
The view displayed on the TV screen while navigating the
media menus, is called the ‘Navigation View’. It works as
follows:
1Path
This shows you the menu choices you have made in
getting to the current screen. A useful tool for Smart
Navigation (see below).
2 Colour buttons bar
The colour button bar shows you the user actions
available for each screen. Pressing a colour button on
the remote control will perform the corresponding
action as mentioned on the screen.
3 Details view
Shows you the available items for the highlighted menu
bar on the left, or the details and a preview of individual
items if possible.
9.1.1 Jump To (number keys on the remote
control)
Use the remote control number buttons to access an item
in a list directly by entering the first letter(s) or number(s)
of the desired item.
If the list is sorted alphabetically, you do this by pressing
the number buttons on the remote control in SMS TEXT
style.
For example: pressing the ‘2’ key several times will cycle through
the following characters : A – B – C – 2... etc .
If the list is sorted numerically, items can be selected by
entering a numbers directly (not in SMS TEXT style). Press
OK to confirm your selection.
9.1.2 Smart Navigation
(Available for certain versions only)
Smart Navigation helps you to navigate ‘intelligently’
through the menus by remembering the menu path(s) you
have taken previously (during the same session).
If you have backed out of a menu path by pressing the
Cursor Left button repeatedly, Smart Navigation will
remember that path for the duration of the current session.
By pressing Cursor Left button repeatedly, you will follow
the same path through the menus. At any time, you may
deviate from your path and follow a new one (this new
branch will also be remembered by the Smart Navigation
feature).
Switch Smart Navigation off (see Options menu on page
28-30) to always select the first menu item on a new page.
23iF9946_12_StDFU_ENG.p659/1/04, 5:35 PM25
25
Advanced navigation and advanced Streamium functions
9.2 Play View
The view displayed on the TV screen while playing a movie,
picture or music, is called the ‘Play View’. It gives different
information and user actions for each type of media.
9.2.1 For movies
It works as follows:
Track info.
This shows you information on the track currently playing.
Colour buttons bar.
The colour button bar shows you the user actions available
for each screen. Pressing a colour button on the remote
control will perform the corresponding action as
mentioned on the screen.
Press the red button once or several times to determine
the amount of information you see on the TV screen.
Press the green button once or several times to choose a
bandwidth and determine the video quality. Note: If there
is not enough bandwidth available, the movie will play
intermittently. Switch to a lower value.
The yellow button is not used.
Press the blue button once or several times to determine
the image size. If the colour button bar has disappeared
from the screen, pressing any of the colour buttons on
the remote control will bring it back. Next, press the colour
button for the action you want.
9.2.2 For photos
It works as follows:
Picture info.
This shows you information on the image currently being
displayed.
Colour buttons bar.
The colour button bar shows you the user actions available
for each screen. Pressing a colour button on the remote
control will perform the corresponding action as
mentioned on the screen.
Press the red button once or several times to determine
the amount of information you see on the TV screen.
The green button is not used.
Press to start a slide show by selecting the time for each
photo to be displayed.
The blue button is not used.
If the colour button bar has disappeared from the screen,
pressing any of the colour buttons on the remote control
will bring it back.
Next, press the colour button for the action you want.
9.2.3 For music
It works as follows:
Track info.
This shows you information on the track currently playing.
Colour buttons bar.
The colour button bar shows you the user actions available
for each screen. Pressing a colour button on the remote
control will perform the corresponding action as
mentioned on the screen.
Press the red button once or several times to determine
the amount of information you see on the TV screen.
The green button is not used.
Press the yellow button and select one of the visuals for
adding a visual dimension to the listening experience.
The blue button is not used.
If the colour button bar has disappeared from the screen,
pressing any of the colour buttons on the remote control
will bring it back. Next, press the colour button for the
action you want.
26
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM26
Chapter 10 – Advanced Philips Media Manager uses
1 Running the Philips Media Manager program
on more than one computer at the same
time.
– If more than one computer has access to the wireless
network, you can also run Media Manager on more
than one computer at the same time to make the media
files on that computer available to the Streamium LCD
TV.
A) Install the Philips Media Manager in the same way
as you did for the first computer (see on page 4, steps
1 - 4).
B) In the Media Manager window, click ‘Settings’.
C) Click the ‘Server’ tab, and change the Server Name.
(e.g. to ‘My laptop’)
> This ‘Server Name’ will be shown in the top-level
menu on your television screen. That way you can keep
apart all the computers in the network that are running
the Philips Media Manager at the same time.
2 Editing media information and creating
playlists.
Right-click a music track, photo or movie to open a
context menu.
In this menu:
– edit media information which will help you organise
and sort your media files,
or
– add the media file to an existing or new playlist.
3 Managing your Streamium account.
After installing the Streamium LCD TV and connecting
it to the Internet, you may click ‘My.Philips’ to open
your personal Streamium account, or... open the
website ‘my.philips.com’ in your Internet browser. Use
the Streamium account window to manage your
Internet settings and preferences.
About ‘My.Philips.com’
‘My.Philips.com’ lets you organise your media services
online.
For example:
–Personalise and manage media and preferences
(e.g. music, favourites, user info)
– Subscribe to PREMIUM Internet services
– Add internet radio stations which are not available yet
(currently only for MP3/pro radio streams).
– Get additional information and links about artists and music
tracks
4 Learning more about the Media Manager
program.
Click ‘Help’ to find out more on how to use and
configure Media Manager.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM27
27
Chapter 11 – Options menu
In the Options menu you can view and edit the settings of the
Streamium LCD TV. On the remote control, press the MENU
button to enter the Options menu. Select a menu item by pressing
Cursor Left, Right. Up or Down buttons and select by pressing
OK or Cursor Right button. Close the Options menu by pressing
the MENU button again on the remote control.
11.1 Main Menu (System Menu)
The System Menu is the top-level menu via which all settings are
accessible. It is divided into sub-menus that address different
categories of settings, see below for an overview.
Users
For selecting a user from the list of existing users. Also, for
adding or removing users from the list.
Add user : You will be asked to enter a new user’s email
address. Remove user: To remove a user the primary user
must enter his or her password.
Network
(see page 29 for details)
For information on and changing: Network, Wireless,
Encryption and Proxy Settings
Preferences
(see page 30 for details)
For setting and changing : Access Control, Video Streaming
and Screen Saver.
Product Info
Gives you information on product type, product ID, and version
numbers.
Online Upgrade
For checking the availability of firmware upgrades. You need a
broadband Internet connection for this to work.
Reset Settings
For resetting all Options menu settings to their default values.
After resetting, the Streamium LCD TV will restart and you
will be asked to reconnect to your network and to re-enter
your primary user name and password.
About
Provides you with general information.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM28
28
Options menu
11.2 Network menu
The Network menu gives you access to network and wireless
settings. See below for an overview.
Note: If you just want to see what the settings are, open the Network/
Wireless Info items and not the Config items.
Network Type
Select whether you want to connect to a Wireless network
or to a Wired network.
Network Config.
Network Mode
Choose DHCP for automatic network configuration by your
network host. (preferred) Choose Static IP for manually
entering a static network configuration. Choose Auto IP for
automatic network configuration without a network host.
Note: If you are not familiar with networking, choose DHCP for
Network Mode.
IP Address, Netmask, Gateway, DNS 1 and DNS 2
Only Static IP requires you to fill values for IP Address,
Netmask, Gateway, DNS 1 and DNS2. See below for an
explanation.
Wireless Config.
Wireless Mode
Choose whether your wireless network has an Access Point
(Wireless Base Station) or is an Ad-Hoc Network (Peer-topeer).
Network Name (SSID)
Enter the name (SSID) of the wireless network you want to
join. Note: the SSID is case-sensitive, meaning that ‘philips is not
the same as ‘PHILIPS’ or ‘Philips’.
Channel Number
Choose one of the available WiFi channels in your region.
(Select 0 for automatic channel assignment.)
Encryption Config.
First, select whether or not to use wireless network encryption
: WEP Encryption Off/On.Then, you may enter up to 4 WEP
Keys to choose from. Enter 5 ASCII or 10 HEX characters to
use a 64-bit WEP-key; enter 13 ASCII or 26 HEX characters
to use a 128-bit WEP-key.The number of characters
determines the type of key you use. Finally, choose which of
the four keys to use : WEP Transmit Key.
Important: You must use the same encryption key throughout
your wireless network.
Note: Refer to the the FAQs on www.philips.com/streamium for
more information on encryption.
Proxy Config.
Your Internet Service Provider (ISP) may have provided you
with Proxy Settings for HTTP Internet) and/or for RTSP (used
for video streaming MPEG-4)). If this is the case, enter the
proxy name(s) and port(s) your ISP provided you with.
Network Info
For viewing the Network settings, including the physical
Ethernet MAC Address you may sometimes need for
identifying the Wired network of the Streamium LCD TV.
Wireless Info
For viewing the Wireless settings, including the physical NIC
MAC Address you may sometimes need for identifying the
Wireless network of the Streamium LCD TV. Go to Signal
Level to check the wireless signal quality.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM29
29
Options menu
11.2.1 Static IP settings
If you select Static IP as your Network Mode in Network
> Network Config > Network Mode, you will need to
provide the Streamium LCD TV with the following manual
settings for its wireless network:
IP Address
This is the fixed IP Address you want the Streamium
LCD TV to have in your network. Preferably, choose
one from the range 192.168.xxx.xxx.
Netmask
Enter the same netmask throughout your network.
E.g.: 255.255.255.000
Gateway
Enter the IP Address of your Internet gateway router,
Wireless Base Station, or network host computer. (E.g.:
192.168.0.1 for the host computer that provides
Internet Connection Sharing.)
DNS 1
Usually, this would be the same address as the Gateway
Address above. However, some Internet Service
Providers (ISP) provide you with separate Dynamic
Name Server addresses you need to use. This should
be a valid IP Address, like xxx.xxx.xxx.xxx
DNS 2
See DNS 1.
11.3 Preferences menu
The Preferences menu gives you access to preferred
settings. See below for an overview.
Access Control
Parental Level
Set a Parental Level up to which playback will be allowed
for all content. If you try to play content that has a
parental level above the selected one, you will be asked
to enter a PIN code before playback. Please, see below
for the disclaimer.
Change PIN
Set the code needed for playback of parental level
protected content.
Video Streaming
Choose Low Bandwidth (150 kbps) if video
streaming does not work properly. High Bandwidth
requires an Internet connection of 300 kbps or more.
Screen Saver
Select the period of inactivity before you want the
screen saver to appear.
Parental Level Disclaimer
The Streamium LCD TV features the PARENTAL
LEVEL control system, which is intended to activate
when playing media files and streams that have certain
software coding.This is according to technical
standards adopted by the set maker and media
content industries. Please note that the PARENTAL
LEVEL system will not operate on files/streams that
do not have the appropriate software coding. Also,
note that at the time of release of this Streamium
LCD TV certain aspects of the technical standards
had not been settled between set makers and the
media content industries.
On this basis Philips cannot guarantee the functioning
of PARENTAL LEVEL system and declines any liability
associated with unintended watching of media content.
If in doubt, please make sure the media plays according
to your PARENTAL LEVEL settings before you allow
children access to the Streamium LCD TV.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM30
30
Chapter 12 – What you need to know about networks
Important note:The Streamium LCD TV has a built-in wireless network adapter and is a wireless network
device exactly like the PCs with a wireless network adapter in the illustrations below.
A network provides a means of communication between two or more computers (and other devices) that are connected
to each other through wired or wireless means.
WIRED
At each computer, you will need a network adapter or Network Interface Card (NIC) to be able to connect the
computer to the network cable. Examples are:
You do not need to open your PC to connect a wireless USB/notebook adapter (available from Philips) or USB/Ethernet
cable to your PC.
expansion cardadapteradapter
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM31
31
What you need to know about networks
In a network, the computers need to be able to connect
to each other physically. Therefore, another important
network property is how the computers connect to each
other, either directly or through a central device.
ONE-ON-ONE WIRED NETWORK
also known as: Direct connection network (max. two PCs)
Note: Use a crossover Ethernet cable to connect two computers
directly to each other.
WIRED NETWORK WITH MORE THAN
TWO PCs
Use a hub or switch to connect more than two PCs to
each other.
Note: Use straight-through Ethernet cables to connect the
computers to the central device (hub/switch).
HOW TO INTERCONNECT WIRED
NETWORKS
Use a gateway router to connect one network to another
(e.g. to the Internet, also known as WAN).
ONE-ON-ONE WIRELESS NETWORK
also known as: ad-hoc / peer-to-peer
WIRELESS NETWORK WITH MORE
THAN TWO PCs
The wireless medium forms a hub in and of itself.
No hardware hub is needed.
Note: For very small networks only.
BRIDGING WIRELESS NETWORKS TO
THE INTERNET
(e.g. the Internet, also known as WAN) also known as:
infrastructure / access point. Use a wireless access point
or base station.
Central devices, like a hub, switch, router or wireless base
station may be stand-alone devices or built into a computer.
•Ahub has multiple ports and serves as a central
connection point for communication lines from all
computers on a wired network. It copies all data
arriving at one port to the other ports. A switch is
similar to a hub, but is able to handle different network
speeds at each port.
• Gateway routers and wireless base stations route
network traffic from one network to another (e.g. from
a wired network to the Internet, or from a wireless
network to a wired network or to the Internet).
Important: Wired and Wireless components may be
linked together to provide a variety of network layouts/
topologies.
INTERNET
INTERNET
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM32
32
Chapter 13 - Advanced wireless network information
What are wireless network connections?
Your wireless network adapter uses a wireless protocol (called IEEE 802.11b/g or WiFi) to
communicate with the Streamium LCD TV by means of radio transmissions. WiFi radio
waves travel outwards from the antenna in all directions, and can transmit through walls
and floors. WiFi can theoretically reach up to 200 meters in an open environment and
reach speeds of up to 11 (b) or 54 (g) megabits per second (Mbps) at close range. However,
the actual network range and data throughput rate will always be less, depending on the
wireless signal quality.
Factors determining your network range and network speed
• Wireless signals travel farther outside of buildings, and when the wireless components
are in direct line of sight to one another. Putting wireless components high up helps
avoid physical obstacles and provides better coverage.
• Building construction such as metal framing and concrete or masonry walls and floors
will reduce radio signal strength. Avoid putting wireless components next to walls and
other large, solid objects; or next to large metal objects such as computers, monitors,
and appliances.
• Wireless signal range, speed, and strength can be affected by interference from
neighbouring wireless networks and devices. Electromagnetic devices such as televisions,
radios, microwave ovens, and cordless telephones, especially those with frequencies in
the 2.4 GHz range, may also interfere with wireless transmission.
• Standing or sitting too close to wireless equipment can also affect radio signal quality.
• Adjusting the antennas: Certain areas, such as directly below the antenna, get relatively
poor reception. Moving the antenna slightly may improve your reception. Note : Pointing
the antenna toward another wireless component will not improve reception.
Securing your wireless network
Since wireless computer networks use radio signals, it is possible for other wireless network
devices outside your immediate area to pick up the wireless signals and either connect to
your network or to capture the network traffic.Therefore, you should always enable the
Wired Equivalent Privacy (WEP) network encryption key to help prevent unauthorised
connections or the possibility of eavesdroppers listening in on your network traffic.
What is WEP?
WEP is a 64-bit or 128 bit encryption key for securing your wireless network communication.
Preferably, you should use the highest encryption strength available. Always enter the same
key with the same length for all your home network computers and for the Streamium
LCD TV.
Securing your network from Internet access
Check in the documentation of your Wireless Base Station or gateway router whether it
provides you with a built-in firewall and network address translation (NAT), providing
security for an ‘always-on’ broadband Internet connection that is being shared among the
computers and devices on your home network. Computers on an ad-hoc network may
share an Internet connection that is set up on one of the computers (ICS). However, a
firewall is usually not built-in and you should install one on the computer that is sharing the
Internet connection.
What is a firewall?
A firewall acts as a barrier that helps protect your network from outside intruders.The
firewall specifies what information can be communicated from the computers on your
network to the Internet, and from the Internet to the computers on your network.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM33
33
Advanced wireless network information
The DOs and DON’Ts of securing your wireless network
DO
Enable the highest WEP key level that your hardware provides for. Upgrade your hardware,
if possible. If you do not protect your wireless network, all data from your PC might be
accessible by, for example, your neighbours or passers-by. Use a wireless base station or
router with Network Address Translation (NAT) and firewall enabled for sharing your
Internet connection.
Change the default passwords for your network devices. Leaving these at default makes it
easy for an outsider to gain access.
Position wireless access points away from windows and toward the centre of your home.This
decreases the strength of the signal outside your home.
Some wireless access points allow you to control access based on the unique Media Access
Control (MAC) address of the network adapter trying to associate with it. If a MAC address
has not been registered in the wireless access point, it will not associate with it. If your
access point has this feature, enable it and add the MAC addresses of the network adapters
including the one from the Streamium LCD TV.
The Wireless MAC address of the Streamium LCD TV can be found in the Options menu
by pressing the MENU button on the remote control.Then select Network > Wireless
Info.
Install an anti-virus program on each computer on your network and use it regularly to
check your computers for viruses. Remember to update the anti-virus program on a regular
basis.
DON’T
Do not rely on radio transmission range limitations to secure your network. Enable wireless
security (WEP) to protect your network from unwanted access.
Do not use WEP keys and passwords that are easy to guess. Do not change passwords to
reflect your name, address, or anything that would be easy to guess.
Never open attachments to email messages that you are not expecting. In addition, scan all
diskettes and homemade CDs for viruses before opening files from them, or before starting
your computer from them.
Do not load a program from an unknown source onto one of your network computers.
Do not ignore the common signs of viruses: unusual messages that appear on your screen,
decreased system performance, missing data, and inability to access your hard drive. If you
notice any of these problems on your computer, run your anti-virus program immediately
to minimise the chances of losing data.
Do not connect your home network to broadband Internet without taking security
measures:
If you do not have a wireless base station installed on your network and you are sharing
Internet access through one of the computers, you may want to consider installing firewall
software.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM34
34
Chapter 14 – Entering an encryption key
A WEP encryption key protects your wireless network against intrusion by encrypting the
data sent through your network. Its setting must be the same for all PCs and devices in
your wireless network. (Default: Disabled.)
WEP key conversion table
ASCIIHEX
030
131
232
333
434
535
636
737
838
939
A41
B42
C43
D44
E45
F46
G47
H48
I49
J4A
K4B
The WEP (Wired Equivalent Privacy) implemented in this Streamium LCD TV is based on
the RC4 encryption algorithm. Please, enter the key in either Hex or ASCII.
– If the key type is Hex, the security keys are four 10 digit keys for the 64-bit WEP setting
and four 26-digit keys for the 128-bit WEP setting. (The hexadecimal digits can be 0~9
& A~F, e.g. D7 0A 9C 7F E5.)
– If the key type is ASCII, the security keys are four 5-digit keys for the 64-bit WEP setting
and four 13-digit keys for the 128-bit WEP setting.
– Consult the ASCII/HEX conversion table if you need to translate a (case-sensitive)
ASCII key into HEX notation. Example: MNode (ASCII) = 4D 4E 6F 64 65 (HEX).
ASCIIHEX
L4C
M4D
N4E
O4F
P50
Q51
R52
S53
T54
U55
V56
W57
X58
Y 59
Z5A
a61
b62
c63
d64
e65
f66
ASCIIHEX
g67
h68
i69
j6A
k6B
l6C
m6D
n6E
o6F
p70
q71
r72
s73
t74
u75
v76
w77
x78
y79
z7A
Note : Some wireless network devices allow you to type in a passphrase instead of an encryption
key. Do not use passphrases with the Streamium LCD TV, since passphrases are not supported.
Tip: Enable the encryption key to secure your wireless computer network from
intruders.
Use an encryption key to secure your wireless network.The encryption key is like a password
that you have to set for your Wireless Network of for the Streamium LCD TV.
35
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM35
Entering an encryption key
a) Setting the encryption key for the
Streamium LCD TV:
1 Press the MENU button on the remote control, then
2 select ‘Network’, and
3 select ‘Encryption Config’.
4 Enable WEP Encryption, and enter a 5, 10, 13 or 26
character password (see above) and press the OK
button.
> The Streamium LCD TV will try to reconnect to the
wireless network and will lose its connection with your
computer.
Note that the encryption key is case sensitive, meaning
that ‘HELLO’ is not the same password as ‘hello’ or ‘Hello’.
b) Setting the encryption key for your
Wireless Network Adapter:
Enter the same encryption key for the Wireless Network
Adapter. See the User Manual of the Wireless Network
Adapter on how to do this.
> Once you have activated the same encryption key for
the Wireless Network Adapter, the connection
between the Streamium LCD TV and your computer
will be re-established.
Example, for the Philips Wireless USB Adapter:
1 Double-click the CPWUA Monitor icon in the lower
right corner of your computer monitor.
2 Click the ‘Configuration’ tab.
3 Adapt the ‘Encryption’ settings in the lower part of
this window to match the encryption settings of the
Streamium LCD TV.
4 Click ‘Apply’ and ‘Save’ to finish.
> The connection will be re-established.
Note : If you have forgotten your encryption key, switch off
encryption or set a new encryption key for your entire
wireless network and for the Streamium LCD TV.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM36
36
Chapter 15 – Internet connection sharing
Before you press the INTERNET button for the first time, you need to
make sure that the Streamium LCD TV has Internet access. Either directly
through a wireless base station, or indirectly through a PC with Internet
access and router/gateway software (e.g. ICS from the Windows OS)
installed and running.
If you connect (either wired or wireless) the Streamium
LCD TV to an existing network host with Internet
access
Prefered solution:
If you have an existing home network with centrally shared broadband
Internet access for all connected computers, you can connect the Streamium
LCD TV directly to your central network device : the router/gateway.That
way, the Streamium LCD TV can access the Internet just like your other
computers and you do not need to install ICS to make Internet access
available to your Streamium LCD TV.
If you connect the Streamium LCD TV (by wires or
wireless) to a stand-alone or client PC with Internet
access
If you connect the Wireless Network adapter to a stand-alone or client
PC with an existing broadband Internet connection, you will need to
bridge - within that PC - the wireless or wired connection that connects
to the Streamium LCD TV, to the existing network adapter that connects
to the Internet.You do this by enabling Internet Connection Sharing (ICS)
from your Microsoft® Windows® operating system for that PC. This makes
the PC share its existing broadband Internet connection with the Streamium
LCD TV.
ICS configuration and usage issues
ICS is intended for use in small networks in which the network configuration
and the Internet connection are managed by the Windows-based computer
on which the shared connection resides (the ‘host’ computer). It is assumed
that on its network, this computer is the only Internet connection, it is the
only gateway to the Internet, and that it sets up all internal network
addresses (this means it is the DHCP server for the network).
If a network has a central host computer or router that acts as a DHCP
server, this server automatically allocates IP addresses, netmasks, and the
gateway address to all DHCP client computers and devices in the network.
Important notes
– Only Microsoft Windows98 SE (Second Edition) or higher provides ICS, other
operating systems are not supported.You may try to use other router/gateway
software at your own discretion.
–You should only install Internet Connection Sharing on the computer that
you use to connect to the Internet.
– The host computer must remain switched on during Internet access sharing.
– ICS is router/gateway software with Dynamic Host Control Protocol server
(DHCP) functionality. The ICS host computer must be the only DHCP server
on the network. Before installing ICS, first disable any DHCP services that are
provided on the network (e.g. by a hardware router/gateway or base station).
Refer to the router/gateway manufacturer’s instructions on how to disable its
DHCP services.
37
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM37
Internet connection sharing
Enabling Internet Connection Sharing
(ICS)
Though ICS works similarly for all operating systems, each
version of Microsoft®Windows® activates Internet
Connection Sharing in its own way. Please see below for
the operating system you are using.
In case of trouble, check Windows Help and the Microsoft
website for information on Internet Connection Sharing.
Enabling Internet Connection Sharing for
Windows XP
You must have administrative rights to enable ICS in
Windows XP.
1 Before you begin, check if you have a working Internet
connection and if your home network is working
properly (if you have one)
• Check the Internet connection by opening a web
page with your browser.
2 Click Start, Settings, and Control Panel.Then double-
click ‘Network and Internet Connections’. Finally, click
‘Network Connections’.
> This will open a list of your network connections.
3 In the list of network connections, right-click on the
network connection that your computer uses to
connect to broadband Internet.
> This will open the context menu of that network
connection.
Note : Do not right-click the wireless network connection
that connects to your Streamium product (e.g. the Philips
Wireless USB adapter 11g).
Right-click the network connection that provides you with
broadband Internet access
4 Click ‘Properties’ at the bottom of the context menu.
> This will open the connection properties menu.
5 In the connection properties menu, click the ‘Advanced’
tab.
> This will give you access to the options for sharing
your Internet connection.
Next:
a) In the ‘Internet Connection Sharing’ section: Place a
check mark to allow other users to connect through
this computer’s Internet connection.
b) Remove the check mark that allows other network
users to control or disable the shared Internet
connection.
Note: For extra security: Enable the Internet Connection
Firewall at the top of this menu to protect your computer
and your network from malicious access from the Internet.
Click ‘OK’ to accept the changed settings.
> Your Internet connection will now be shared with
other network connections, including the one that
connects your computer to your Streamium system.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM38
38
Internet connection sharing
Enabling Internet Connection Sharing for Windows
98SE
While installing, you may be asked for the Windows Installation CD.
Please, keep it at hand.
1 Before you begin, check if you have a working Internet
connection and if your home network is working properly
(if you have one).
• Check the Internet connection by opening a web page with your
browser.
2 Click Start, Settings, and Control Panel.
Then double-click Add/Remove Programs and click the Windows
Setup tab.
> The window to the left will appear.
3 Double-click on Internet Tools
> The next window will appear.
4 In this window, put a mark in the check box for Internet
Connection Sharing and click OK.
Then click OK again.
> The Internet Connection Sharing wizard will appear.
5Follow the instructions on the screen, in each screen click
Next to continue the wizard until it is finished. In the
wizard you need to:
– Select ‘High-speed connection’ for your type of connection to the
Internet.
– Choose the network adapter that provides you with Internet access
to the PC.
– Choose the network adapter that connects your PC to the
Streamium LCD TV.
– You may click ‘Cancel’ when asked if you want to make a Client
Configuration disk.
> This concludes the wizard.
6 Next, check your Network properties as follows:
a) Click Start, Settings, Control Panel, and then double-click Network.
b) On the Configuration tab, browse the ‘The following network
components are installed’ box. It should now include ‘Internet
Connection Sharing adapter’ and ‘TCP/IP->Internet Connection
Sharing adapter’.
c) Double-click ‘TCP/IP->Internet Connection Sharing adapter’.
d) In the IP Address tab, select ‘Obtain an IP Address automatically’.
e) In the WINS Configuration tab, select ‘Use DHCP for WINS
resolution’.
f) In the Gateway tab, remove all gateways if any are listed.
g) In the DNS Configuration tab, select ‘Disable DNS’.
h) In the Bindings tab, for security reasons you must de-select all bindings.
(Please, do the same for ‘TCP/IP (Shared)->External access network
adapter’.)
i) Click OK to accept the new TCP/IP settings.
j) Select ‘Windows Logon’ as the Primary Network Logon. Any changes
to the network configuration will require a restart of the computer.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM39
39
Internet connection sharing
Enabling Internet Connection Sharing for
Windows Me
1 Before you begin, check if you have a working Internet
connection and if your home network is working
properly (if you have one).
• Check the Internet connection by opening a web page with your
browser.
2 On the desktop, double-click ‘My Network Places’ and
then double-click ‘Home Networking Wizard’.
> The Home Networking wizard will appear.
3 In each screen, click Next to continue the wizard until it
is finished.
In the wizard you need to select ‘Yes’ (you are using Internet on
this computer) and select ‘A direct connection to my ISP using
the following device:’ and choose the network adapter you use to
make contact with the Internet from the list.
4 In the next screen, select ‘Yes’ when asked ‘if you want
other computers on your home network to use the
Internet connection on this computer’.
Choose the network adapter that connects your PC to the
Streamium LCD TV.
5 Follow the instructions on the screen, and enter:
– a computer name (unique for each computer, e.g. STUDY or
MOM)
– a workgroup name (the same for all computers in the network,
e.g. HOMENET)
Note: these names are not the SSID or network name. You do not need
to share your files and printers. You do not have to make a Home
Networking Setup disk.
> This concludes the wizard.
Enabling Internet Connection Sharing for
Windows 2000
You must have administrative rights to enable ICS in Windows 2000.
1 Before you begin, check if you have a working Internet
connection and if your home network is working
properly (if you have one).
• Check the Internet connection by opening a web page with your
browser.
2 Click Start, Settings, and Control Panel.Then double-
click ‘Network and Dial-Up.
Connections’ and then double-click ‘Home Networking Wizard’.
3 Right-click the connection you want to share.
Then, click Properties.
> The Properties window for this network connection will appear.
4 Click the Sharing tab, and then select ‘Enable Internet
Connection Sharing for this connection’.
> This enables the ICS feature.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM40
40
Chapter 16 – Advanced (Network) problem solving
Go to www.philips.com/streamium for the latest information on problem solving.
Movies will not play:
The bit rate might be too high. Convert the movie to a lower bit rate.
Check your broadband Internet speed
At www.2wire.com/meter/bm.html you can check your broadband Internet speed. This
should be more than 240 kbps for the Streamium LCD TV’s Internet function to work.
Check with your Internet Service Provider:
– Whether you may connect more than one device (computers and the Streamium system)
to the internet connection.
– Whether your ISP allows only devices with registered MAC ad dresses to connect to
the Internet.
– Whether or not you need to set-up proxy servers for HTTP and/or RTSP.
Check whether you have activated the same wireless encryption key
throughout your wireless network:
If you have forgotten your Encryption key, switch off encryption or set a new encryption
key for your entire wireless network and for the Streamium LCD TV.
If you are using a firewall, check whether you have opened the ports
42951 TCP and 42591 UDP:
Some ports need to be opened, check at www.philips.com/streamium for the latest
information on which ports need to be open.
Check your network’s IP configuration:
Check the Options menu of the Streamium LCD TV. In the Network > Network Info menu
a gateway address should be present.This should be the IP address of the PC or network
device that connects to the Internet.You can check the network gateway address through
your network adapter program or with IPCONFIG (see below).
Note: Philips Wireless USB/Notebook Adapter users may click the ‘Link information’ tab in the
CPWUA/CPWNA Monitor program.
Check your computer’s IP configuration as
follows:
For Windows 98SE / Windows Me
1 Click ‘Start’, ‘Run...’, and enter ‘winipcfg’.
2 Click ‘OK’ to view the IP settings.
3 In this window, select your wireless network adapter.
4 Click ‘More Info>>’ to expand.
For Windows XP / Windows 2000
1 Click ‘Start’, ‘Run...’, and enter ‘command’.
2 In the DOS box, type ‘ipconfig /all’ and press Enter.
3For each network adapter, you will see results similar
to the window on the left.
• If your network uses static IP addressing that you
have set manually, then you will also need to choose a
unique IP address for the Streamium LCD TV in the
same range as the network’s IP addresses (e.g.
192.168.2.xxx). Use the same subnet mask as your
network (e.g. 255.255.255.000), and write down the
IP address of the network device that connects you to
the Internet (the Gateway IP address).
• Sometimes your Internet Service Provider requires
you to use a proxy address. Check this with your
Internet Service Provider. Alternatively, check the proxy
settings of your Internet browser software for more
information.
41
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM41
Chapter 17 – Glossary
Ad-Hoc Network
Access Point
(Infrastructure network)
Broadband
Chroma Delay
Codec
DHCP
Ethernet
Firewall
Gamma
Gateway
Home Link/PC Link
Horizontal position
(Advanced TV Setting)
Infrastructure Network
MAC Address
NAT (Network Address
Tr anslation)
Peer-to-peer
Philips Media Manager
Proxy address
SSID
STP
Streaming
Streamium
uPnP
Vertical position
(Advanced TV Setting)
WEP
Wireless Base Station
(wireless gateway router)
Wireless USB Adapter
(wireless network
adapter)
A direct network connection between two devices (two computers, or a PC and the
Streamium LCD TV).
A network connection between two or more devices (computers, or PCs and the
Streamium LCD TV) with a central network host (router, base station or PC).
The Internet bandwidth determines the speed of your Internet connection. Broadband
Internet is everything above 256 kbps.
Colour fine-tuning for different types of TV screens.
A software format for compressing and de-compressing media.
If a network has a central host computer, wireless base station or router that acts as a
DHCP server, this server allocates IP addresses, netmasks, and the gateway address to
all DHCP client computers and devices in the network automatically.
The most popular type of wired home network.
A firewall acts as a barrier that helps protect your network from intruders from the
Internet. The firewall specifies what information can be communicated from the
computers on your network to the Internet, and from the Internet to the computers
on your network.
Display intensity setting for different types of TV screens.
The computer or network device that provides access to the Internet.
Refer to accessing streaming content from the home network.
Shifts the horizontal position of the display on the TV screen.
See Access Point.
The unique 12-character hardware address of the (wireless) network
adapter. Sometimes used for identifying network hardware.
A security feature implemented in most Internet gateway routers and Wireless Base
Stations to keep your home network safe from intrusions from the Internet.
See Ad-Hoc Network.
The software you need to install and have active on your computer to be able to use
PC Link for sending music, photo and movie files from the PC to the Streamium LCD
TV.
The address of an intermediate computer, provided to you by your Internet Service
Provider. Sometimes needed for accessing the Internet.
The wireless network name (this is not the same as your computer network name).
Shielded Twisted Pair.The type of network cable you need to use.
Playing media content from the Internet while it is downloading is called ‘streaming’.
The Philips range of Internet enabled products.
Universal Plug and Play.
Shifts the vertical position of the display on the TV screen.
Designates a type of wireless encryption.
A hardware device that interconnects your wireless home network to the Internet.
The hardware device that you need to connect to your PC to be able to make wireless
contact with the Streamium LCD TV.
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM42
42
23iF9946_12_StDFU_ENG.p658/31/04, 4:30 PM44
MODEL :
PROD. NO :
3139 125 33581
LCD TV
Introduction
Introduction
Introduction
Introduction
Thank you for purchasing this television set.
Thank you for purchasing this television set.
Thank you for purchasing this television set.
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate yourTV set.
This handbook has been designed to help you install and operate yourTV set.
This handbook has been designed to help you install and operate yourTV set.
This handbook has been designed to help you install and operate yourTV set.
We would strongly recommend that you read it thoroughly.
We would strongly recommend that you read it thoroughly.
We would strongly recommend that you read it thoroughly.
We would strongly recommend that you read it thoroughly.
We hope our technology meets entirely with your satisfaction.
We hope our technology meets entirely with your satisfaction.
We hope our technology meets entirely with your satisfaction.
We hope our technology meets entirely with your satisfaction.
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste, specialist companies collect used appliances
and dismantle them after retrieving any materials that can be used again (ask
your dealer for further details).
1
1
1
1
2
Presentation of the LCD Television
Remote control
&
Television keys:
• .: to switch the TV on or off.
• VOLUME - + (-”+): to adjust sound level.
• PROGRAM - + (- P +):to select programmes.
• MENU: to access or close menus, simultaneously
press the ” - and ” + keys. The - + keys can
be used to select an adjustment and the ” - +
keys to make that adjustment.
é
Adjustable stand.
Rear of set :
The main connections are made at the bottom of
the television.
For more details on connections see page 10.
“ TV and radio aerial sockets
‘ EXT1 socket
( Audio output for connecting an amplifier.
§ VGA and audio input for connecting a computer
è Side connections
! Ethernet socket :For more information about the
STREAMIUM functions, see the separate
documentation.
Pull out the plastic insulation sheet from the
battery, this will activate the remote control.
The battery supplied with the appliance does not
contain mercury or nickel cadmium so as to
protect the environment. Please do not discard
your used batteries, but use the recycling methods
available (consult your distributor).
&
+-
PROGRAM
-
+
VOLUME
é
è
!
VGA
EXT 1FM ANT
:
"'(§
Audio
Out
In
Audio
In
CR 2025
3
Remote control keys
Teletext key (p.8)
Select peripherals (p.10)
Press several times to select the
required EXT connector.
Sound mode
Used to force programmes in
Stereo and Nicam Stereo to Mono
or, for bilingual programmes, to
choose between
Dual I or Dual II.
The Mono indication is red when in
forced position.
Unused key.
TV / PC / Radio
Press one of these keys to switch
the television between TV, PC or
radio mode (p. 9).
Cursor (UP/DOWN/LEFT/RIGHT)
These 4 keys are used to move
around the menus
(<>≤≥)
.
16:9 Format (p.7)
Mute
To mute or restore the sound.
Volume
To adjust the sound level.
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The personal position relates to
settings selected from the menus.
Screen information
To display / remove the programme
number, the time, the sound mode
and the time remaining on the
timer. Hold down for 5 seconds to
permanently display the
programme number on the screen.
Standby
To set the TV to standby mode.
To switch the TV set on again,
press .,P - + or ñ/ô.
Mode selector *
Previous programme
To access the previously viewed
programme.
Surround Sound
To activate / deactivate the
surround sound effect. In stereo,
this gives the impression that the
speakers are further apart. For
models equipped with Virtual
Dolby Surround*, you can
experience Dolby Surround Pro
Logic sound effects.
Active control
Optimizes the picture quality depending
on the quality of the incoming signal
and the ambient light conditions.
Menu
To call up or exit the menus.
Selecting TV programmes
To move up or down a programme.
The number and the sound
mode are
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2nddigit must be entered
before the dash disappears.
Teletext (p. 8)
* Manufactured under license from
Dolby Laboratories.“Dolby” and the
double-D symbols are trademarks
of Dolby Laboratories.
Not applicable for TV mode.
* Mode selector
Press the Select key to select the required mode : TV, DMR (other equipment) or STREAMIUM.
The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if
left idle.The remote control automatically returns to TV mode.
For more information about the STREAMIUM functions, see the separate documentation.
For more information about the STREAMIUM functions, see the separate documentation.
4
Quick installation
When you turn on the TV set for the first time,
a menu is displayed on screen.This menu
prompts you to select the country and language
for the menus:
If the menu is not displayed, press and hold down
the
”- and ”+ keys on the TV set for 5
seconds to display the menu.
& Use the cursor
UP/DOWN on the remote
control to select your country and validate
with cursor
RIGHT.
If your country does not appear in the list, select
choice “. . .”
é Next select your language using the cursor
UP/DOWN and validate with cursor RIGHT.
“ The search starts automatically. All the available
TV programmes and radio stations will be
stored. This operation takes a few minutes.The
display shows the progress of the search and
the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press h. If no
programme is found, consult the possible solutions p. 12.
‘ If the transmitter or cable network sends the
automatic sort signal, the programs will be
numbered correctly. In this case, the installation
is complete.
( If this is not the case, you need to use the Sort
menu to number the programs correctly.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc.). In this
case, indicate your choice using the cursor
UP/DOWN and validate with cursor RIGHT.
& Positioning the television set
Place your TV on a solid stable surface. To avoid
danger do not expose the TV to water,or a heat
source (e.g. lamp, candle, radiator). Do not
obstruct the ventilation grid at the rear.
é
Connecting the aerials
• Use the aerial connection lead supplied and
connect the
: socket situated at the bottom
of the TV to your aerial socket.
• Insert the radio aerial lead supplied into the FM
ANT socket located at the bottom of the TV.
• Connect the power lead to the television and the
mains plug into the wall socket (220-240 V/50 Hz).
• Arrange the leads by passing them through the
television stand. Replace the stand cover.
For connecting other appliances see page p.10.
“
Switching on
To switch on the set, press the on/off key. A
green indicator comes on and the screen lights
up. Go straight to the Quick Installation chapter.
If the TV remains in standby mode(red indicator),
press the P
# key on the remote control.
The indicator will flash when you use the remote control.
Installing your television set
FM ANT
:
Plug’n’Play
Country
GB
Language
English
FM ANT.
5 cm
+-
PROGRAM
-
+
VOLUME
5 cm
5 cm
5
Manual store
Other settings in the Install menu
This menu is used to store the programmes
one at a time.
& Press the
h key.
é With the cursor, select the Install menu then
Manual store:
“ System: select
Europe (automatic detection*)
or
Western Europe (BG standard), Eastern
Europe (DK standard), United Kingdom (Istandard) or France (LL’ standard).
* Except for France (LL’ standard), you must select
choice France.
‘ Search: press cursor
RIGHT.The search starts.
Once a programme is found, the scanning stops
and its name is displayed (when available). Go
to the next step. If you know the frequency of
the required programme, this can be entered
directly using the
ñ to ô keys.
If no picture is found, consult the possible solutions (p. 12).
( Program No.: enter the required number
with the cursor LEFT/
RIGHT or ñ to ô
keys.
§ Fine Tune: if the reception is not satisfactory,
adjust using the cursor LEFT/RIGHT.
è Store: press cursor
RIGHT.The program is
stored.
! Repeat steps ‘ to ! for each programme to
store.
ç To quit the menus, press ∂.
& Press the h key and select the Install menu:
é Language: to change the display language for
the menus.
“ Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your country
does not appear in the list, select “. . .”
‘ Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 4).
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In
this case, indicate your choice using the cursor
UP/DOWN and validate with cursor RIGHT. To quit
or interrupt the search, press
h. If no picture is
found, consult the possible solutions (p. 12).
( Name :
If required,you can give a name to the
programmes and external connectors. Use the
cursor LEFT/RIGHT
to move around the name
display area (5 characters) and the
cursor
UP/DOWN
to select the characters.When the
name has been entered, use the
cursor LEFT
to
exit.The name is stored.
Note: on installation, the programs are named
automatically when an identification signal is sent.
§ To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Manual Store
System
Search
Program No.
Fine Tune
Store
Europe
Program sort
& Press key h.The TV Menu is displayed on
the screen.
é With the cursor, select the Install menu
followed by the Sort menu.
“ Select the programme you want to move using
the cursor
UP/DOWN and press cursor RIGHT.
‘ Then use the cursor
UP/DOWN to select the
new number and validate with cursor
LEFT.
( Repeat steps “ and ‘ for each program you
wish to renumber.
§ To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Install
Language Æ •
Country Æ •
Auto Store Æ •
Manual Store Æ •
Sort Æ •
Name Æ •
0
1
2
3
4
5
6
Picture settings
Sound adjustments
& Press h then cursor RIGHT.The Picture
menu is displayed:
é Use the cursor UP/DOWN to select a setting
and the cursor LEFT/
RIGHT to adjust.
“ Once the adjustments have been made, select
Store and press cursor RIGHT to store them.
Press
∂ to exit.
Description of the adjustments:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference
between the light and dark tones.
•
Sharpness: this changes the picture definition.
• Colour Temp.: this changes the colour
rendering:
Cold (bluer), Normal (balanced)
or
Warm (redder).
• Store: to store the picture adjustments and
settings.
& Press h, select Sound (DOWN) and press
cursor
RIGHT.The Sound menu is displayed:
é Use the cursor UP/DOWN to select a setting
and the cursor LEFT/
RIGHT to adjust.
“ Once the adjustments have been made, select
Store and press cursor
RIGHT to store these
changes.
‘ To quit the menus, press
∂.
Description of the settings:
• Equalizer: to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
•
Balance: this balances the sound on the left
and right speakers.
• Delta Volume: this is used to compensate
any volume discrepancies between the
different programs or EXT sockets.This
setting is available for programs 0 to 40 and
the EXT sockets.
• AVL (Automatic Volume Leveller): this is
used to limit increases in sound, especially on
program change or advertising slots.
• Dolby Virtual:To activate / deactivate the
surround sound effect.You can also access
these settings with key
f.
• Store: this is used to store the sound settings.
Feature settings
& Press h,select Features (cursor DOWN) and
press cursor
RIGHT.You can adjust:
é Contrast +: automatic adjustment of the
picture contrast which permanently sets the
darkest part of the picture to black.
“ NR: attenuates picture noise (snow) in difficult
reception conditions.
‘ Sleep : to select an automatic standby period.
( To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp.
Store
39
TV Menu
Picture
Sound
Features
Install
Mode
Sound
Equalizer Æ •
Balance Æ •
Delta Volume Æ •
AVL Æ •
Dolby Virtual Æ •
Store Æ •
120 Hz
500 Hz
1500 Hz
5 KHz
10 KHz
7
16:9 Formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format
(conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen
(letterbox format).This function allows you to optimise the picture display on screen.
Press the
ë
key (or cursor LEFT/RIGHT) to select the different modes:
This TV set is also equipped with automatic switching which will select the correct-screen
format, provided the specific signals are transmitted with the programmes.
4:3
The picture is reproduced in 4:3 format and a black band is displayed on either side
of the picture.
Zoom 14:9
The picture is enlarged to 14:9 format, a thin black band remains on both sides of
the picture.
Zoom 16:9
The picture is enlarged to 16:9 format.This mode is recommended when displaying
pictures which have black bands at the top and bottom (letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the screen leaving
the sub-titles visible.
Super Wide
This mode is used to display 4:3 pictures using the full surface of the screen by
enlarging the sides of the picture.
Widescreen
This mode restores the correct proportions of images transmitted in 16:9.
Note:
If you display a 4:3 picture in thid mode, it will be enlarged horizontally.
Fullscreen
This mode displays images in full screen.
8
Teletext
Press :
You will obtain :
Teletext is an information system broadcast by certain channels which can be consulted like a
newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar
with the transmission language (cable networks, satellite channels, etc.).
Teletext call
Selecting a
page
This is used to call teletext, change to transparent mode
and then exit.The summary appears with a list of items
that can be accessed. Each item has a corresponding
3 digit page number.
If the channel selected does not broadcast teletext, the
indication 100 will be displayed and the screen will remain
blank (in this case, exit teletext and select another channel).
Enter the number of the page required using the
ñ to
ô or- P + keys. Example: page 120, enter ó ò ñ.
The number is displayed top left,the counter turns and
then the page is displayed.Repeat this operation to view
another page.
If the counter continues to search, this means that the page is
not transmitted. Select another number.
Direct access
to the items
Coloured areas are displayed at the bottom of the screen.
The 4 coloured keys are used to access the items or
corresponding pages.
The coloured areas flash when the item or the page is not yet
available.
Contents
This returns you to the contents page (usually page 100).
Stop
sub-page
acquisition
Certain pages contain sub-pages which are automatically
displayed successively.This key is used to stop or resume
sub-page acquisition.The indication
_ appears top left.
Hidden
information
Enlarge a
page
Favourite
pages
To display or hide the concealed information (games
solutions).
This allows you to display the top or bottom part of the
page and then return to normal size.
Instead of the standard coloured areas displayed at the bottom
of the screen, you can store 4 favourite pages on the first
40 channels which can then be accessed using the coloured
keys (red, green, yellow,blue).Once set, these favourite pages
will become the default every time tetetext is selected.
& Press the h key to change to favourite pages mode.
é Display the teletext page that you want to store.
“ Press the coloured key of your choice for 3 seconds.
The page is now stored.
‘ Repeat the operation with the other coloured keys.
( Now when you consult teletext, your favourite pages
will appear in colour at the bottom of the screen.
To temporaly retrieve the standard items, press h.
To clear everything, and return the standard items as the
default, press ∂ for 5 seconds.
REC
INTERNET
TV DMR STREAM
PHOTO MUSIC VIDEO
HOME LINK
REPEAT
SHUFFLE
ABC_-DEF
JKLGHIMNO
TUVPQRSWXYZ
.@ZOOMROTATE
¤
DELETE
P
P
Y
9
Using the radio
Using in PC monitor mode
Choosing radio mode
Press the
 key on the remote control to
switch the TV to radio mode. Press the
W
key to return to TV mode. In radio mode the
number and name of the station (if available),
its frequency and the sound mode are
indicated on the screen.
Selecting programmes
Use the
ñ/ô
or - P + keys to select the
FM stations (from 1 to 40).
Using the radio menus
Use the
h key to access the specific radio
settings.
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the
Install menu : Auto Store
(for a complete search) or Manual Store (for
a station by station search).These menus work
in exactly the same way as the TV menus.
Screen saver
In the
Features menu you can activate / close
the screen saver.
PC Mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and
adjust the resolution (see p.11).
Choosing PC mode
Press the
U key on the remote control to
switch the TV to PC. Press the
W key to
return to TV mode.
If there is no PC signal for more than five seconds,
the TV automatically goes into standby mode.
Using the PC menus
Press the h key to access the specific settings of
the PC monitor mode. Use the cursor to adjust
them (the settings are automatically saved) :
• Picture :
-
Brightness / Contrast
: to adjust the
brightness and contrast.
-
Horizontal / Vertical
:
to adjust the horizontal
and vertical placing of the image.
- Adjust Colour :
to adjust the colours (cold,
normal or warm).
• Audio Selection :
to choose the sound
reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while
you use the computer.
• Features :
-
Phase/Clock
:
eliminates the horizontal
(
Phase) and vertical (Clock) interfering lines.
- View Format:
to choose between large screen
or the original format of the PC screens.
- Auto Adjust :
position is set automatically.
• Reset To Factory Setting :
to return to the
factory settings (default settings).
• Mode Select :
to come back to TV or radio
mode.
Note:
When using the LCD TV as a PC monitor, slight diagonal interference lines may be obser ved when it is operated
under electromagnetic interference environment but will not affect the performance of this product. For better
performance, good quality VGA cable with good noise isolation filter is recommended.
10
Connecting peripheral equipment
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press
ñ.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Remove the stand cover and the clip on rear panel of the television to expose the connectors.
Arrange the leads by passing them through the television stand.Replace the stand cover.
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
Video recorder
Satellite receiver, decoder, CDV, games,etc.
Carry out the connections shown opposite.
To select connected equipment
Press the
µ key to select EXT1.
Most equipment (decoder, video recorder) carries out the switching itself.
Other equipment
AV in
AV 3
S-VIDEO
:
EXT 1FM ANT
:
VCR
EXT 1FM ANT
:
EXT 1FM ANT
VGA InAudio InAudio Out
Side connections
AV in
AV 3
S-VIDEO
Amplifier
Audio
Out
VGA
Audio
In
Audio
in
In
Computer
Make the connections as shown opposite.
With the
µ key, select AV/S-VHS.
For a mono set, connect the sound signal to the AUDIO L (or AUDIO
R) input.The sound automatically comes out of the left and right
speakers of the set.
Headphones
When headphones are connected, the sound on the TV set will be
cut.The
- ” +
keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
To connect to a hi-fi system, use an audio connection cable and
connect the sound output
Audio out on the TV set to the
“AUDIO IN” “L” and “R” input on your hi-fi amplifier.
Connect the monitor output of your computer to the
PC VGA In
of the TV.
VGA InAudio In
Connect the sound output
to the input
Audio in (PC) of the TV.
Audio out L and R of the computer
For more information on using PC mode see page 9.
PC
Configure the computer on 1024 x 768, 60 Hz for
optimum resolution.
Here is the list of the different display resolutions available on
your TV:
640 x 350, 70 Hz720 x 400, 70 Hz1024 x 768, 60 Hz
640 x 350, 85 Hz720 x 400, 85 Hz1024 x 768, 70 Hz
640 x 480, 60 Hz800 x 600, 56 Hz1024 x 768, 75 Hz
640 x 480, 67 Hz800 x 600, 60 Hz1024 x 768, 85 Hz
640 x 480, 72 Hz800 x 600, 72 Hz1152 x 864, 75 Hz
640 x 480, 75 Hz800 x 600, 75 Hz1280 x 768, 75 Hz
640 x 480, 85 Hz800 x 600, 85 Hz
832 x 624, 75 Hz
11
12
Glossary
RGB signals : These are the three video signals, Red Green Blue, which make up the picture.
Using these signals improves picture quality.
S-VHS Signals: These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards.
The luminance signals Y (black and white) and chrominance signals C (colour) are recorded separately on
the tape.This provides better picture quality than with standard video (VHS and 8 mm) where the Y/C
signals are combined to provide only one video signal.
NICAM sound: Process by which digital sound can be transmitted.
System: Television pictures are not broadcast in the same way in all countries.There are different
standards: BG, DK, I, and L L’.The
System setting (p. 5) is used to select these different standards.This is not
to be confused with PAL or SECAM colour coding. Pal is used in most countries in Europe, Secam in
France, Russia and most African countries.The United States and Japan use a different system called NTSC.
16:9: Refers to the ration between the length and height of the screen.
Wide screen televisions have a ration of 16/9, conventional screen TV sets have a ration of 4/3.
Tips
Poor reception
No picture
No sound
PC modes don’t
work ?
Remote control
Standby
Cleaning the set
Still no results?
The proximity of mountains or high buildings may be responsible for ghost
pictures, echoing or shadows. In this case, try manually adjusting your picture: see
Fine Tune (p.5) or modify the orientation of the outside aerial. If you are using an
indoor aerial, reception may be difficult in certain conditions.You can improve
reception by rotating the aerial. If the reception remains poor, you will need to
use an external aerial
Have you connected the aerial socket properly? Have you chosen the right
system? (p. 5). Poorly connected euroconnector cables or aerial sockets are often
the cause of picture or sound problems (sometimes the connectors can become
half disconnected if the TV set is moved or turned). Check all connections.
If on certain channels you receive a picture but no sound,this means that you do not have
the correct TV system. Modify the
System
setting (p. 5).
The amplifier connected to the TV does not deliver any sound? Check that you
have not confused the audio output with the audio input.
Check that you have configured the computer on a compatible display resolution
(see p. 11).
The TV set does not react to the remote control; the indicator on the set no
longer flashes when you use the remote control? Replace the battery.
If the set receives no signal for 15 mins, it automatically goes into standby mode.
To save power, your set is fitted with components that give it a very low power
consumption when in standby mode (less than 1 W).
Only use a clean, soft and lint-free cloth to clean the screen and the casing of your
set. Do not use alcohol-based or solvent-based products.
Disconnect the mains plug of the TV for 30 seconds then reconnect it.
If your TV set breaks down, never attempt to repair it yourself: contact your
dealer's after-sales service.
CANAL ................FREQ (MHz)
E2 ........................48.25
E3 ........................55.25
E4 ........................62.25
E5 ......................175.25
E6 ......................182.25
E7 ......................189.25
E8 ......................196.25
E9 ......................203.25
E10 ....................210.25
E11 ....................217.25
E12 ....................224.25
R1 ........................49.75
R2 ........................59.25
R3 ........................77.25
R4 ........................85.25
R5 ........................93.25
R6 ......................175.25
R7 ......................183.25
R8 ......................191.25
R9 ......................199.25
R10 ....................207.25
R11 ....................215.25
R12 ....................223.25
S1 ......................105.25
S2 ......................112.25
S3 ......................119.25
S4 ......................126.25
S5 ......................133.25
S6 ......................140.25
S7 ......................147.25
S8 ......................154.25
S9 ......................161.25
S10 ....................168.25
S11 ....................231.25
S12 ....................238.25
S13 ....................245.25
S14 ....................252.25
CANAL ................FREQ (MHz)
S15 ....................259.25
S16 ....................266.25
S17 ....................273.25
S18 ....................280.25
S19 ....................287.25
S20 ....................294.25
H1 ......................303.25
H2 ......................311.25
H3 ......................319.25
H4 ......................327.25
H5 ......................335.25
H6 ......................343.25
H7 ......................351.25
H8 ......................359.25
H9 ......................367.25
H10 ....................375.25
H11 ....................383.25
H12 ....................391.25
H13 ....................399.25
H14 ....................407.25
H15 ....................415.25
H16 ....................423.25
H17 ....................431.25
H18 ....................439.25
H19 ....................447.25
21.......................471.25
22.......................479.25
23.......................487.25
24.......................495.25
25.......................503.25
26.......................511.25
27.......................519.25
28.......................527.25
29.......................535.25
30.......................543.25
31.......................551.25
32.......................559.25
CANAL ................FREQ (MHz)
33.......................567.25
34.......................575.25
35.......................583.25
36.......................591.25
37.......................599.25
38.......................607.25
39.......................615.25
40.......................623.25
41.......................631.25
42.......................639.25
43.......................647.25
44.......................655.25
45.......................663.25
46.......................671.25
47.......................679.25
48.......................687.25
49.......................695.25
50.......................703.25
51.......................711.25
52.......................719.25
53.......................727.25
54.......................735.25
55.......................743.25
56.......................751.25
57.......................759.25
58.......................767.25
59.......................775.25
60.......................783.25
61.......................791.25
62.......................799.25
63.......................807.25
64.......................815.25
65.......................823.25
66.......................831.25
67.......................839.25
68.......................839.25
69 .......................855.2
5
ITALY
CANALE ..............FREQ (MHz)
A ..........................53.75
B ..........................62.25
C ..........................82.25
D ........................175.25
E ........................183.75
F.........................192.25
G ........................201.25
H ........................210.25
H1 ......................217.25
FRANCE
CANAL ................FREQ (MHz)
2...........................55.75
3...........................60.50
4...........................63.75
5...........................176.0
6...........................184.0
7...........................192.0
8...........................200.0
9...........................208.0
10.........................216.0
B ........................116.75
C ........................128.75
D ........................140.75
E ........................159.75
F.........................164.75
G ........................176.75
H ........................188.75
I..........................200.75
J .........................212.75
K ........................224.75
L.........................236.75
M........................248.75
N ........................260.75
O ........................272.75
P ........................284.75
Q ........................296.75
Ta b le of TV frequencies.
Frequenztabelle der Fernsehsender.
Liste des fréquences TV.
Frequentietabel TV-Zenders.
Tabella delle frequenze TV.
Lista de frecuencias TV.
Lista das frequências TV
Liste over TV senderne.
Tabell over TV-frekvenser.
Tabell över TV-frekvenser.
TV-taajuustaulukko.
K·Ù¿ÏÔÁÔ˜ Û˘¯ÓÔÙ‹ÙˆÓ ÔÌÒÓ.
CФЛТУН ˜‡ТЪУЪ ФВВ‰‡Ъ˜ЛНУ‚.
A televizió-adóállomások
frekvenciáinak a listája.
Lista częstotliwości stacji nadawczych.
Seznam frekvenčních pásem vysílačů.
Zoznam frekvenčných pásiem vysielačov.
EUROPE
Positioning the TV
For the best results, choose a position where light
does not fall directly on the screen, and at some
distance away from radiators or other sources of
heat. Leave a space of at least 5 cm all around the
TV for ventilation, making sure that curtains,
cupboards etc. cannot obstruct the air flow through
the ventilation apertures.The TV is intended for use
in a domestic environment only and should never be
operated or stored in excessively hot or humid
atmospheres.
General Points
Please take note of the section entitled 'Tips' at the
end of this booklet.
Interference
The Department of Trade and Industry operates a
Radio Interference Investigation Service to help TV
licence holders improve reception of BBC and IBA
programmes where they are being spoilt by
interference.
If your dealer cannot help, ask at a main Post Office
for the booklet "How to Improve Television and
Radio Reception".
Mains connection
Before connecting the TV to the mains, check that the
mains supply voltage corresponds to the voltage
printed on the type plate on the rear panel of the TV. If
the mains voltage is different,consult your dealer.
Important
This apparatus is fitted with an approved moulded
13 Amp plug.To change a fuse in this type of plug
proceed as follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS1362 5A,
A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
In order to maintain conformity to the EMC directive,
the mains plug on this product must not be removed.
Connecting the aerial
The aerial should be connected to the socket
marked : at the back of the set.An inferior aerial
is likely to result in a poor, perhaps unstable picture
with ghost images and lack of contrast. Make-shift loft
or set-top aerials are often inadequate.Your dealer
will know from experience the most suitable type for
your locality.
Should you wish to use the set in conjunction with
other equipment, which connects to the aerial socket
such as TV games, or a video camera it is recommended
that these be connected via a combiner unit to avoid
repeated connection and disconnection of the aerial plug.
Fitting the stand (if provided)
Use only the stand provided with the set, making
sure that the fixings are properly tightened.A
diagram showing how to assemble the stand is
packed with the stand. Never use a make-shift stand,
or legs fixed with woodscrews.
Information for users in the UK (not applicable outside the UK)
Por
Por
Por
Por
3139 125 33601
LC04 STR
3139 125 33601
LC04 STR
3139 125 33601
LC04 STR
3139 125 33601
LC04 STR
MODEL :
MODEL :
MODEL :
MODEL :
PROD.NO :
PROD.NO :
PROD.NO :
PROD. NO :
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.