Philips 227E3LHSU/93, 227E3LPHSU/27, 227E3LHSU/00, 227E3LHSU/69, 227E3LPHSU/00 Service Manual

21.5ƎW LCD Color Monitor Chassis: Meridian 3



Service

Description

Page

Table of Contents.........................................………….1

Revision List………….................................................2

Important Safety Notice…………................................3

1. Monitor Specifications….........................................5

2. LCD Monitor Description….....................................7

3. Operation Instructions….........................................8

3.1 General Instructions………………………….…...8

3.2 Control Buttons…………..…………………….…8

3.3 OSD Menu………………….................................10

4. Input/output Specification............................……11

4.1 Input Signal Connector.................................……11

4.2 Resolution & Preset Modes.................................12

4.3 Pixel Defect Policy…………………………………13

4.4 Failure Mode of Panel………………………….....15

5. Block Diagram………………………….................16

5.1 Scaler Board....................................………….....16

5.2 Power Board.........................................…...........17

6. Schematic Diagram.............................................. 18

6.1 Scaler Board…………………….…………………18

6.2 Power Board.................................................…...24

6.3 Headphone Board…….…………………………26

Description Page

6.4 IR Board…….……………………………………27

6.5 Key Board…….……………………………………29

6.6 LED Board…….……………………………………30

7. PCB Layout………………………………………...31

7.1 Scaler Board……………………………………..31

7.2 Power Board……………...………………………32

7.3 Headphone Board…….…………………………34

7.4 IR Board…….………………………………………34

7.5 Key Board…….……………………………………35

7.6 LED Board…….……………………………………35

8. Wiring Diagram………………………………….…..36

9. Scaler Board Overview…………………………....38

10. Mechanical Instructions………………………....39

1 1. Repair Flow Chart…….……………………………41

12. ISP Instructions...…............................................45

13. DDC Instructions….............................................52

14. White Balance, Luminance Adjustment…...........72

15. Monitor Exploded View…....................................74

16. Recommended & Spare Parts List...….............76

17. Different Parts List……………………….……….84

18. General Product Specification……… …...……….87

SAFETY NOTICE

ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHE N SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.

CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING

REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES

227E3LPHSU/00 227E3LPHSU/27 227E3LPHSU/69 227E3LPHSU/75 227E3LPHSU/93 227E3LPHSU/94 227E3LPHSU/96 227E3LPHSB/00

227E3LHSU/00 227E3LHSU/01 227E3LHSU/69 227E3LHSU/93 227E3LHSU/96

!

Meridian 3

2

Revision List

Version Release Date Revision History

A00 May.06, 2011 Initial release, Draft Version

A01 May.18, 2011 Update BOM for 227E3LPHSU/00 and 227E3LPHSU/69

A02 Jul.11,2011 Update BOM for 227E3LHSU/69, 227E3LHSU/93 and 227E3LPHSU/94

A03 Aug.15,2011 Update BOM for 227E3LPHSU/27

A04 Dec.22,2011 Update BOM for 227E3LHSU/96 and 227E3LPHSU/96

A05 Sep.28, 2012

Update BOM for 227E3LHSU/00



3

Meridian 3

Important Safety Notice

This electronic user guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the o riginal invoice or cash receipt, indicatin g the date of p urchase, dealers name and model and production number of the product.

Warnings

Use of controls, adjustments or procedures other than those specified in this document ation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor.

Operation

y Keep the monitor out of direct sunlight and away from stoves or any other heat source. y Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics. y Do not block the ventilation holes on the cabinet. y When positioning the monitor , make sure the power plug and outlet are easily accessible. y If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching

the power cable or DC power cord for normal operation.

y Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact

with your local service center. (Please refer to Customer Care Consumer Information Center)

y • Do not subject the monitor to severe vibration or high impact conditions during operation. y • Do not knock or drop the monitor during operation or transportation.

Maintenance

y To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving

your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.

y Unplug the monitor if you are not going to use it for an extensive period of time. y Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth

when the power is off. However , never use organic sol vent, such as, alcoh ol, or ammonia-ba sed liquids to clean your monitor.

y To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or

excessive moisture environment.

y If your monitor gets wet, wipe it with dry cloth as soon as possible. y If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the

power cord. Then, remove the foreign substance or water, and send it to the maintenance center.

y Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold. y In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor

in a location that falls within the following temperature and humidity ranges.

¾ Temperature: 0-40°C 32-95°F ¾ Humidity: 20-80% RH

!

Meridian 3

4

y IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended.

Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known a s “after-imaging” or “ghost imaging”, on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has bee n switched off.

Warning

Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.

Service

y The casing cover should be opened only by qualified service personnel. y If there is any need for any document for repair or integration, please contact with your local service center.

(Please refer to the chapter of "Consumer Information Center")

y For transportation information, please refer to "Technical Specifications". y Do not leave your monitor in a car/trunk under direct sun light.

Note

Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed.



5

Meridian 3

1. Monitor Specifications

Technical specifications

Picture/Display

LCD Panel Type TFT-LCD Backlight LED Panel Size 21.5" W (54.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.248 x 0.248 mm Brightness 250 cd/m² SmartContrast 20,000,000:1 Contrast Ratio (typ.) 1000:1 Response Time (typ.) 5 ms Optimum Resolution 1920 x 1080 @ 60Hz Viewing Angle 170° (H) / 160° (V) @ C/R > 10 Picture Enhancement SmartImage Lite Display Colors 16.7 M Vertical Refresh Rate 56Hz - 76Hz Horizontal Frequency 30 KHz - 83 KHz sRGB YES

Connectivity

Signal Input DVI (Digital), VGA (Analog), HDMI Input Signal Separate Sync, Sync on Green

Convenience

User Convenience

227E3LH: 227E3LPH:

OSD Languages

English, French, German, Spanish, Italian, Russian, Simplified

Chinese, Portuguese, Turkish Other convenience Kensington lock Plug & Play Compatibility DDC/CI, sRGB, Windows 7/Vista/XP, Mac OSX, Linux

Stand

Tilt -5 / +20

Power

On mode

227E3LH: 21.8W (typ.), 27W (max)

227E3LPH: 21.8W (typ.), 24W (max) On mode (ECO mode) 20.9 W (typ.)

Energy Consumption (EnergyStar 5.0 test method)

AC Input Voltage at

100V AC +/- 5V AC,

50Hz +/- 3Hz

AC Input Voltage at 115V AC +/- 5V AC, 60Hz +/- 3Hz

AC Input Voltage at 230V AC +/- 5V AC, 50Hz +/- 3Hz

Normal Operation (typ.) 18.4 W 18.4 W 18.5 W Sleep 0.5 W 0.5 W 0.5 W

!

Meridian 3

6

Off 0.5 W 0.5 W 0.5 W

Heat Dissipation*

AC Input Voltage at

100V AC +/- 5V AC,

50Hz +/- 3Hz

AC Input Voltage at 115V AC +/- 5V AC, 60Hz +/- 3Hz

AC Input Voltage at 230V AC +/- 5V AC, 50Hz +/- 3Hz

Normal Operation 62.8 BTU/hr

62.8 BTU/hr 63.14 BTU/hr

Sleep 1.71 BTU/hr 1.71 BTU/hr 1.71 BTU/hr Off 1.71 BTU/hr 1.71 BTU/hr 1.71 BTU/hr Power LED indicator On mode: White, Standby / Sleep mode: White (blinking) Power Supply Build-in, 100-240VAC, 50/60Hz

Dimension

Product with Stand (W x H x D) 534.34 x 407.9 x 216 mm Product without Stand (W x H x D)

534.34 x 335.89 x 41.1 mm

Weight

Product with Stand 4.01 kg Product without Stand 3.47 kg Product with Packaging 4.17 kg

Operating Condition

Temperature Range (operation) 0°C to 40 °C Temperature Range (storage) -20°C to 60°C Relative Humidity 20% to 80%

Altitude

operation: +120,000 ft (3,658 m)

Non-operation: + 40,000ft (12,192 m) MTBF 30,000hrs

Environmental

ROHS YES EPEAT Silver (www.epeat.net) Packaging 100% recyclable

Compliance and standards

Regulatory Approvals

CE Mark, FCC Class B, GOAST, SEMKO, TCO Certified, UL/cUL,

BSMI, ISO9241-307

Cabinet

Color Black (Black) / Blue (Front) Finish Glossy

Note:

1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net

for

registration status in your country.

2. This data is subject to change without notice. Go to www.philips.com/support

to download the latest



7

Meridian 3

version of leaflet.

2. LCD Monitor Description

The LCD monitor will contain a scaler board, a power board, a headphone board, two IR boards (option), a LED board and a key board. The scaler board houses the flat panel con t rol logic, brightness control logic and DDC. The power board will provide AC to DC inverter voltage to drive the backlight of panel and the scaler board chips each voltage.

Monitor Bock Diagram

Power Board

(Include Converter board)

LED panel

Scaler Board

(Include Audio)

HDMI DVI-D D-SUB

LED Drive

Key Board

LED Board

Video signal, DDC

HOST Computer

AC IN

90 ~ 264 V

IR Boards

(

For 227E3LPH

)

Headphone

Board

!

Meridian 3

8

3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor. By changing these setting, the picture can be adjusted to your personal preference.

γThe power cord should be connected. γ Press the power button to turn on the monitor.

The power indicator will light up.

3.2 Control Buttons

Operating the Monitor

Front view product description

227E3LH

1. : Switch monitor’s power ON and OFF.

2.

: Access the OSD menu/

3. Ż: Return to previous OSD level.

4.

: Adjust the speaker volume.

5. Ÿ/ź: Adjust the OSD menu.

6.

: Change the signal input source.

7.

: SmartImage Lite: There are three modes to be

selected: Standard, Internet and Game.

227E3LPH

1. : Switch monitor’s power ON and OFF.

2.

: Access the OSD menu.

3. Ż: Return to previous OSD level.

4. SENSOR: Power sensor.

5. Ÿ/ź: Adjust the OSD menu.

6.

: Change the signal input source.

7.

SmartImage Lite: There are three modes to

be selected: Standard, Internet and Game.

Connecting to your PC

227E3LH

1. AC power input

2. VGA input

3. DVI-D input

4. HDMI input

5. Audio input

6. Audio output

7. Kensington anti-thief lock



9

Meridian 3

227E3LPH

1. AC power input

2. VGA input

3. DVI-D input

4. HDMI input

5. HDMI audio output

6. Kensington anti-thief lock

Connect to PC

1. Connect the power cord to the back of the monitor firmly.

2. Turn off your computer and unplug its power cord.

3. Connect the monitor signal cable to the video connector on the back of your computer.

4. Plug the power cord of your computer and your monitor into a nearby outlet.

5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.

Install the base stand

1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or d amaging the screen.

2. Hold the base stand with both hands and firmly insert the base stand into the base column.

1) Gently attach the base to the base column until

the latch locks the base.

2) Use your fingers to tighten the screw located at

the bottom of the base, and secure the base to the column tightly.

!

Meridian 3

10

3.3 OSD Menu

On-screen Display (OSD) is feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen display inter face is shown as below:

227E3LH

227E3LPH

Basic and simple instruction on the control keys

In the OSD shown above users can press źŸ buttons at the front bezel of the monitor to move the cursor, OK to confirm the choice or change.

To Lock/Unlock OSD function (User Mode)

The OSD function can be locked by pressing “MENU” button for more than 6 seconds. Locked OSD function can be released by pressing “MENU” button for more than 6 seconds again.

The OSD tree

Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.



11

Meridian 3

4. Input/ Output Specification

4.1 Input Signal Connector

D-sub Connector

Pin No. Signal Name

1 Red 2 Green/ SOG 3 Blue 4 Sense (GND) 5 Cable Detect (GND) 6 Red GND 7 Green GND 8 Blue GND

9 DDC +3.3V or +5V 10 Logic GND 11 Sense (GND) 12 Bi-directional data 13 H/H+V sync 14 V-sync 15 Data clock

DVI Connector

Pin No. Signal Name

1 T.M.D.S. data2-

2 T.M.D.S. data2+

3 T.M.D.S. data2 shield

4 No Connect

5 No Connect

6 DDC clock

7 DDC data

8 No Connect

9 T.M.D.S. data110 T.M.D.S. data1+ 1 1 T.M.D.S. data1 shield 12 No Connect 13 No Connect 14 +5V Power 15 Ground (for +5V) 16 Hot plug detect 17 T.M.D.S. data0-

18 T.M.D.S. data0+ 19 T.M.D.S. data0 shield 20 No Connect 21 No Connect 22 T.M.D.S clo ck shield 23 T.M.D.S. clock+ 24 T.M.D.S. clock-

HDMI Connector

Pin No. Signal Name

1 TMDS data 2+ 2 TMDS data 2 Shield 3 TMDS data 24 TMDS data 1+ 5 TMDS data 1 Shield 6 TMDS data 17 TMDS data 0+ 8 TMDS data 0 Shield

9 TMDS data 010 TMDS clock+ 11 TMDS clock Shield 12 TMDS clock 13 CEC 14 HEC Data- 15 DDC SCL 16 DDC SDA 17 DDC/CEC/HEC Ground 18 +5 V Power 19 Hot Plug Detect & HEC Data+

!

Meridian 3

12

4.2 Resolution & Preset Modes

Maximum Resolution

1920 x 1080 at 60 Hz (analog input) 1920 x 1080 at 60 Hz (digital input)

Recommended Resolution

1920 x 1080 at 60 Hz (digital input)

Format Resolution Type V. freq (Hz)

480i 720 x 480 SD 60

480p 720 x 480 SD 60

576i 720 x 576 SD 50 576p 720 x 576 SD 50 720p 1280 x 720 HD 50, 60

1080i 1920 x 1080 HD 50, 60

1080p 1920 x 1080 HD

24, 25, 30, 50,

60

Note:

Please notice that your display works best at native resolution of 1920 x 1080@60Hz. For best display quality, please follow this resolution recommendation.

Power Management Definition

VESA Mode

Video

H-S

ync

V-S ync

Power

Used

LED

Color

Active ON Yes

Yes < 21.8W

(typ.)

White

Sleep OFF No NO

< 0.5W

(typ.)

White

(Blink)

Switch

off

OFF - -

< 0.5W

(typ.)

OFF

The following setup is used to measure power consumption on this monitor.

y Native resolution: 1920 x 1080 y Contrast: 50% y Brightness: 250 nits y Color temperature: 6500k with full white pattern

Note:

This data is subject to change without notice

.



13

Meridian 3

4.3 Pixel Defect Policy

Philips strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing process and practice stringent quality control. However, pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT LCD panel must exceed these acceptable levels. For example, no more than 0.0004% of the sub pixels on a

21.5Ǝ XGA monitor may be defective. Furthermore, Philips sets even higher quality standard for certain types or combinations of pixel defects that are more noticeable than others. This policy is valid worldwide.

Pixels and Sub pixels

A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. Many pixels together form an image. When all sub pixels of pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a signal black pixel. Other combinations of lit and dark sub appear as single pixels of other colors.

Types of Pixel Defects

Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel

defects and several types of sub pixel defects within each category.

Bright Dot Defects Bright dot defects appear as pixel s or sub pixels that are always lit or ‘on’. That is, a Bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern. There are three types of bright dot defects:

One lit red, green or blue sub pixel

Two adjacent lit sub pixels:

- Red + Blue = Purple

- Red + Green = Yellow

- Green + Blue = Cyan (Light Blue)

Three adjacent lit sub pixels (one white pixel)

Note:

A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.

!

Meridian 3

14

Black Dot Defects Black dot defects appear as pixels

or sub pixels that are always dark or ‘off’. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. There are two types of black dot defects:

Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.

Pixel Defect Tolerances

In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD p anel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the followin g tables.

Bright Dot Defects Acceptable level

1 lit subpixel 3 2 adjacent lit subpixels 1 3 adjacent lit subpixels (one white pixel) 0 Distance between two bright dot defects* >15mm Total bright dot defects of all types 3

Black Dot Defects Acceptable level

1 dark subpixel 5 or fewer 2 adjacent dark subpixels 2 or fewer 3 adjacent dark subpixels 0 Distance between two black dot defects* >15mm Total black dot defects of all types 5 or fewer

Total Dot Defects Acceptable level

Total bright or black dot defects of all types 5 or fewer

Note:

1. 1 or 2 adjacent sub pixel defects = 1 dot defect.

2. This monitor is ISO9241-307 compliant. (ISO9241-307: Ergonomic re quirement, analysis and compliance test methods for electronic visual displays)



15

Meridian 2

4.4 Failure Mode Of Panel



Failure description

Phenomenon

Vertical block defect

Vertical dim lines

Vertical lines defect (Always bri

g

ht or dark)

Horizontal block defect

Horizontal dim lines

Horizontal lines defect (Always bri

g

ht or dark)

Has bri

g

ht or dark pixel

Polarizer has bubbles

Foreign material inside polarizer. It shows liner or dot shape.

Concentric circle formed

Bottom back light of LCD is brighter than normal

Back light un-uniformity

Backli

g

ht has foreign material. Black or white color, liner or circular type

Quick reference for failure mode of LCD panel

this pa

g

e presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical instruction on this manual to eliminate failure by replace LCD panel.

!

Meridian 3 16

5. Block Diagram

5.1 Scaler Board

HDMI1_+5V

DVI5V

+5V_SB

VCC1.8

VCC3.3

VLCD

DVI5V

05.PANEL INTERFACE

5.PAN EL I N TER F AC E

VLCD

PA0

PA1

PA2

PA3

PA4

PA5

PA6

PA7

PA8

PA9

PB0

PB1

PB2

PB3

PB4

PB5

PB6

PB7

PB8

PB9

LT-SCL

LT-SDA

02.INPUT

2.INPUT

RIN

GNDR

GIN

GNDG

BIN

GNDB

HSYNC

VSYNC

DDCA_SDA

DDCA_SCL

RX0+

RX0-

RX1-

RX1+

RX2+

RX2-

RXC-

RXC+

DVI_SDA

DVI_SCL

DET_VGAI

DET_DVII

DDC_WP

DVI5V

+5V_SB

DVI_HPD

+5V_SB

VCC1.8

VLCD

+5V_SB

03.HDMI1

3.HDMI1

HDMI1_+5V

HDMI1_D2+

HDMI1_D2-

HDMI1_D1+

HDMI1_D1-

HDMI1_D0+

HDMI1_D0-

HDMI1_CK+

HDMI1_CK-

HDMI1_SDA

HDMI1_SCL

DET_HDMI1

CEC_CTRL

HDMI1_HPD

DDC_WP

+5V_SB

06.AUDIO

6.AUDIO

Volume

Mute

AOUT_R

AOUT_L

AIN_L

AIN_R

+5V_SB

Audio_SD

HDMI1_+5V

04.SCALER

4.SCALER

RIN

GNDR

GIN

GNDG

BIN

GNDB

HSYNC

VSYNC

DDCA_SDA

DDCA_SCL

DVI_SCL

DVI_SDA

RX0+

RX0-

RX1+

RX1-

RX2+

RX2-

RXC+

RXC-

DET_VGAI

DET_DVII

DDC_WP

HDMI1_D2+

HDMI1_D2-

HDMI1_D1+

HDMI1_D1-

HDMI1_D0+

HDMI1_CK+

HDMI1_CK-

HDMI1_D0-

HDMI1_SDA

HDMI1_SCL

DET_HDMI1

CEC_CTRL

HDMI1_HPD

DDC_WP

Mute

AOUT_L

AOUT_R

AIN_R

AIN_L

on_Panel

on_BACKLIGHT

Adj_BACKLIGHT

PANEL_ID#

Audio_EN

Mute

VCC3.3

VCC1.8

PB0

PB1

PB2

PB3

PB4

PB5

PB6

PB7

PB8

PB9

PA0

PA1

PA2

PA3

PA4

PA5

PA6

PA7

PA8

PA9

DVI_HPD

DVI5V

HDMI1_+5V

+5V_SB

LT-SDA

LT-SCL

Audio_SD

VCC3.3

07.POWER

7.POWER

on_Panel

on_BACKLIGHT

Adj_BACKLIGHT

PANEL_ID#

Audio_EN

Mute

VCC1.8

VCC3.3

VLCD

+5V_SB

Volume



17

Meridian 3

5.2 Power Board

EMI filter

PWM Control

LD7750RGR

(IC901)

Transformer

(T901)

AC input

16V

5V

Bridge

Rectifier and

Filter

Feedback Circuit

Rectifier

Diodes

Photocoupler

(IC902)



ENA

Feedback Circuit

LED Bar

Boost Circuit

12V

OVP Circuit

Setup-up Controller

TA9690GN

(IC801)

DIM

Start Re sistor

(R905, R908, R909)

Q901

!

18

Meridian 3

6. Schematic

6.1 Scaler Board 715G4641M0I000004K

Remark: Parts position can be searched by using FIND function in PDF.

FB101 19 OHM 500mA1 2

VGA5V

U107

AOZ8902CIL

123 4

5

6

CH1VNCH2 CH3

VP

CH4

C113

220N16V

FB106

300OHM

GIN 5

BLUE-

SDA_VGA

R101

NC

C103 47nF 16V

R107

75R 1/16W 1%

DAT2-

U106

AOZ8902CIL

123 4

5

6

CH1VNCH2CH3

VP

CH4

R125 100R 1/ 16W 5%

PB0

C102 47nF 16V

DAT0-

U102

CAT24C02WI-GT3

123

45

678

A0A1A2

VSSSDA

SCLWPVCC

RED-

FB102 19 OHM 500mA1 2

R122 4K7 1/16W 5%

C118

NC/100N16V

R121

2K2 1/16W 5%

R119 100R 1/ 16 W 5%

ESD_VGA

R104 100R 1/ 16 W 5%

R130 NC

RX0+ 5

C124

NC/100N16V

GNDR 5

BLUE+

C117

NC/100N16V

ZD102

NC/RLZ5.6B

DVI_HPD 5

HSI

VSI

GREEN-

R124 22K 1/16W 5%

C106 5PF 50V

DDC_WP

ESD_DVI

ESD_VGA

R138 10R 1/ 16 W 5%

DAT0+

R136 10R 1/ 16 W 5%

DET_DVI

R128 100R 1/ 16W 5 %

RXC+ 5

RIN 5

DAT2+

DAT1+

DCLK+

R132 4K7 1/16W 5%

DDCA_SCL5

+5V_SB

C121

NC/100N16V

R117

0R05 1/10W

R139 10R 1/ 16 W 5%

R112 100R 1/ 16 W 5%

PC4

RX2- 5

ESD_DVI

ESD_VGA

SDA_DVI

FB104 300OHM

R108

75R 1/16W 1%

C123

NC/100N16V

VSYNC 5

DAT1-

R133 4K7 1/16W 5%

C116

220N16V

R140 10R 1/ 16 W 5%

Q101

NC

DVI_SCL5

C109 47nF 16V

DCLK-

C101

NC/100N16V

FB105 300OHM

GNDB 5

C122

NC/100N16V

ADC4

RX0- 5

DET_DVII 5

ESD_DVI

ZD101

NC/RLZ5.6B

R142 10R 1/ 16 W 5%

DET_VGAI 5

DDC_WP 5

+5V_SB4,5,7,8

SCL_DVI

DET_DVI

RED+

R129 1K 1/16W 5%

PE0*

VGA5V

DET_VGA

R115 10K 1/ 16W 5%

FB103 19 OHM 500mA1 2

RX1+ 5

C110 47nF 16V

R103 100R 1/ 16 W 5%

R120

2K2 1/16W 5%

R111 100R 1/ 16 W 5%

U103

AOZ8902CIL

123 4

5

6

CH1VNCH2CH3

VP

CH4

R118 100R 1/ 16 W 5%

R110 100R 1/ 16 W 5%

DVI5V 5

C104 47nF 16V

VSI

CN101

D-SUB 15P

162738495

1112131415

10

1

7

16

BIN 5

HSI

R134 22K 1/16W 5%

D102

BAV70

3

1

2

DVI_SDA5

DDCA_SDA5

SCL_VGA

C115

NC/100N16V

R135 10R 1/ 16 W 5%

HPD

R109

75R 1/16W 1%

U105

CAT24C02WI-GT3

123

45

678

A0A1A2

VSSSDA

SCLWPVCC

D101

BAV70

3

1

2

C111

22P 50V

C105 5PF 50V

HSYNC 5

RX2+ 5

DDC_WP

SCL_VGA

R141 10R 1/ 16 W 5%

U104

AOZ8902CIL

123 4

5

6

CH1VNCH2 CH3

VP

CH4

PC4

SDA_VGA

DVI5V1

U101

AOZ8902CIL

123 4

5

6

CH1VNCH2 CH3

VP

CH4

RXC- 5

R127 100R 1/ 16W 5 %

+5V_SB

C108 47nF 16V

RX1- 5

R137 10R 1/ 16 W 5%

C107 5PF 50V

R102 100R 1/ 16 W 5%

R123 4K7 1/16W 5%

GNDG 5

CN102

JACK

1

2

3

4

5

678

9

101112

13

141516

17

18

19

20

212223

24

26

25

DAT2-

DAT2+

2/4shield

DAT4-

DAT4+

DDC SCL

DDC SDA

VSYNC

DAT1-

DAT1+

1/3shield

DAT3-

DAT3+

+5V

SYNC GND

HPD

DAT0-

DAT0+

0/5shield

DAT5-

DAT5+

clk shield

clk+

clk-

GND

C112

22P 50V

C114

NC/100N16V

DVI5V1R126 100R 1/ 16W 5%

GREEN+

19

Meridian 3

Remark: Parts position can be searched by using FIND function in PDF.

HDMI1_+5V

R153

1K 1/16W 5%

HDMI1_+5V

HDMI1/D0+

HDMI1/CK+

PE1*

HDMI1/D0-

U111

NC/RClamp0524P.TCT

1

234

56

789

10

IN1

IN2

GND

IN3

IN4OUT4

OUT3

GND

OUT2

OUT1

HDMI1/D1+

HDMI1/D1-

HDMI1/D2-

HDMI1/D0-

R157 22K 1/16W 5%

HDMI1/CK+

HDMI_SDA

HDMI1/D1+

HDMI1_HPD 5

+5V_SB

Q708

NC

R155 4K7 1/16W 5%

HDMI1_+5V5

R754

NC

HDMI1/D0+

ESD_HDMI1HDMI1/CK+

HDMI_HOTPLUG

HDMI1_D1- 5

HDMI1/D2-

ZD104

NC/RLZ5.6B

DET_HDMI1

U108

CAT24C 02WI-GT3

123

45

678

A0A1A2

VSSSDA

SCLWPVCC

HDMI1/CK-

HDMI1_D2+ 5

HDMI_SCL

HDMI1_+5V

HDMI1/CK-

DDC_WP 5

HDMI_SDA

R162

0R05 1/16W

U112

AOZ8804DI

123456

789

10

CH1

CH2VNCH3

CH4NC

NCVNNC

NC

R159 100R 1/16W 5%

R160

10K 1/16W 5%

PC4

C125

100N16V

ZD105

NC/RLZ5.6B

DET_HDMI1 5

DET_HDMI

HDMI1/D0+

HDMI1/CK+

HDMI1/D2-

HDMI1_SDA5

HDMI1_D2- 5

HDMI1/D1+

HDMI1_+5V

C120

220N16V

HDMI1_SCL5

HDMI1/D0+

HDMI1/D0-

HDMI1/D2+

HDMI1/D1-

HDMI1/D2-

CEC3*

HDMI1/CK-

HDMI1/D2+

R161

10K 1/16W 5%

U110

AOZ8804DI

123456

789

10

CH1

CH2VNCH3

CH4NC

NCVNNC

NC

HDMI1_D1+ 5

HDMI_HOTPLUG

D103

BAT54C

1

3

2

HDMI1/D1-

CN501

HDMI

20

21

12345678910111213141516171819

222324

TH1

TH2

D2+

D2 Shield

D2-

D1+

D1 Shield

D1-

D0+

D0 Shield

D0-

CK+

CK Shield

CK-

CE Remote

NC

DDC CLK

DDC DATA

GND

+5V

HP DET

TH3

TH4

TH5

HDMI1/D1-

C119

100N16V

U109

AOZ8902CIL

123 4

5

6

CH1VNCH2 CH3

VP

CH4

Q102

LMBT3904LT1G

U113

NC/RClamp0524P.TCT

1

234

56

789

10

IN1

IN2

GND

IN3

IN4OUT4

OUT3

GND

OUT2

OUT1

R753 NC

HDMI1/CK+

ESD_HDMI1

+5V_SB 3,5,7,8

HDMI1_D0+ 5

HDMI1_D0- 5

HDMI1/CK-

R154

10R 1/16W 5%

R156 4K7 1/16W 5%

HDMI1/D1+

ZD103

NC/RLZ5.6B

HDMI1/D2-

HDMI_SCL

HDMI1/D0+

HDMI1/D0-

HDMI1/D2+

HDMI1_CK- 5

HDMI1/D1-

DET_HDMI

R158 100R 1/16W 5%

HDMI1/D2+

HDMI1/CK-

CEC_CTRL 5

HDMI1/D2+

HDMI1/D1+

ADC4

HDMI_SDA

CEC

HDMI_SCL

HDMI1_CK+ 5

!

20

Meridian 3

Remark: Parts position can be searched by using FIND function in PDF.

HDMI1_+5V

PA6

R404

10K 1/16W 5%

R452 N C/100R 1/ 16W 5%

AIN_R 7

GNDR3

54

R464

NC/0R 05 1/ 16W

C407

100N16V

CEC3*

FB403

120 OHM

1 2PB2

WP

C410

100N16V

R459 7K5 1/16W 5%

R401

470R 1/16W 1%

CN401

NC/8PIN

1234567

8

VCC3.3

INT-B

16

PB5

R463

NC/4K7 1/16W 5%

125

PA2

PB1

D401

NC/BAT54C

PA[0..9] 6

C409

100N16V

R442 0R05 1/16W

PA3

VCC3.3

ADC6

R461 4K7 1/16W 5%

DVI_HPD 3

PB6*

DVDD

C405

100N16V

R470 0R05 1/16W

R412

10K 1/16W 5%

D403 RLZ5.6B

D406 NC/RLZ5.6B

R405

2K2 1/16W 5%

+5V_SB

VCC3.3

DET_DVII 3

FB411

NC/120 OH M

1 2

R460 4K7 1/16W 5%

PC1*

ADC_1V8

LEDA

3D SCL

C427 NC/100N 16V

U403

NC/M24C04-WMN6TP

123

45

678

A0A1A2

VSSSDA

SCLWPVCC

ADC3

R421

NC

R437

220K 1/16W 5%

HDMI1_SDA4

DVI_SDA3

C402

10uF 16V

on_Panel 8

R429

1R 1/10W 5%

VCC3.3

R462

NC/4K7 1/16W 5%

DDCA_SCL3

DVI_VCC

C429 NC/100N 16V

HDMI1_HPD 4

P31*

PB8

R418 100R 1/16W 1%

RX0+3

ADC4

DVI5V

R457

NC

R439

3.9K1/16W

PB[0..9] 6

PC7

R443 0R05 1/16W

C419

1uF 10V

HDMI1_CK+4

GIN3

C411

100N16V

R415

2K2 1/16W 5%

PA7

PB3

FB406

120 OHM

1 2

VCC3.3

FB407

NC/300OHM

1 2

R406

NC/27K 1/ 16W 5%

C428 NC/100N 16V

GNDB3

119

FB405

120 OHM

1 2

X401

12MHz

52

PB0

PA9

R431

1MOHM 1/16W +/-5%

PANEL_ID# 8

65

R432 NC / 2K2 1/16W 5%

R403

100K 1/16W 5%

C415

10uF 16V

PC7

D404 RLZ5.6B

C413

10uF 16V

MPLL_VD D

R419

100K 1/16W 5%

CN405

NC/6PIN

12345

6

VCC3.38

ADC5

R430 NC / 2K2 1/16W 5%

HDMI1_D2-4

ADC5

3D SDA

R420

56R 1/10W 5%

on_BACKLIGHT 8

28

DVI_VCC

VCC3.3

5V_DET

PD6

ADC_VDD

DET_HDMI1_5V

KEY2

PWMB*

104

KEY1

LED_A

C471

10uF 16V

R453 N C/100R 1/ 16W 5%

AUDIO_VDD

SCL1

R414

0R05 1/16W

RX2-3

VCC3.3

RESET

R450

NC/4K7 1/ 16 W 5 %

C412

100N16V

Q401

LMBT3906LT1G

C474

100N16V

DVI_SCL3

PB1

R408 10 0R 1/ 16W 5%

MPLL_VDD

R449

NC/4K7 1/ 16 W 5 %

R456

NC

VCC3.3

LEDG

PA0

DET_DVI5V

LED_G

CN404

NC/CONN

12345

6

R427

2K2 1/16W 5%

RXC-3

53

ADC_VDD

SCL1

EE_WP

HDMI1_CK-4

PA[0..9]

D405 RLZ5.6B

C408

100N16V

R433

100K 1/16W 5%

U401

NT68677UMFG/E

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

2223242526

27

28

29

3031323334

35

36

37

38

39

40

41

42

43

44

45

46

4748495051

52

53

5455

56575859606162

63

64

102

101

100

99

98

979695949392919089

8887868584838281807978

777675

74

7372717069

68

67

66

65

128

127

126

125

124

123

122

121

120

119

118

117

116

115

114

113

112

111

110

109

108

107

106

105

104

103

REXT

RX1C-

RX1C+

RX2C-

RX2C+

AGND

RX10-

RX10+

RX20-

RX20+

AGND

RX11-

RX11+

RX21-

RX21+

AVCC

RX12-

RX12+

RX22-

RX22+

ADC_GNDA

BIN1+

BIN1-

GIN1+

GIN1-

RIN1+

RIN1-

ADC_1V8

ADC_VDD

BIN0+

BIN0-

GIN0+

GIN0-

RIN0+

RIN0-

HSYNCI2

VSYNCI 2

HSYNCI1

VSYNCI1/TOUTP

DGND

PB4*/DDC _SCL0*

PB5*/DDC _SDA0*

PB6*/DDC _SCL1*

PB7*/DDC _SDA1*

P30*/RXD*

P31*/TXD*/SPDIF *

PB0/ADC0/INTE0

PB1/ADC1/INTE1

PB2/ADC2/INTE2

PB3/ADC3/INTE3

PE2*/PWMA*/DBC0*

CVDD

DVDD

AUDIO_VDDAUDIO_GND

I2S3/AIN1_R

I2S2/AIN1_L

I2S1/AIN0_R

I2S0/AIN0_L

WD

SCK/AOUT_R

MCLK /AO UT_ L

AUDIO_BY PASS

DGND

PC4/PW M8

PC2*/PWM6*

PC0*/PW M4*/CEC2*

CVDD

DGND

T0M

T0P

T1M

T1P

T2M

T2P

TCLK 1M

TCLK1P

T3M

T3P

DVDD

T4M

T4P

T5M

T5P

T6M

T6P

TCLK 2M

TCLK2P

T7M

T7P

DGND

PD6

PD5

PD4/AMUTE

SPI_CK

SPI_SI

SPI_SO

SPI_CE

P35*

P34*

DVDD

MVDD

AVCC

DGND

MVDD

PA7*/DDC _SDA3*

PA6*/DDC _SCL3*

PA5*/DDC _SDA2*

PA4*/DDC _SCL2*

PE1*/LPD_IN 1*

PE0*/LPD_IN 0*

CVDD

OSC_VDD

OSCO

OSCI

DGND

RSTB

PA3*/PWM3*/AD C7

PA2*/PWM2*/AD C6

PA1*/PWM1*/AD C5

PA0*/PWM0*/AD C4/DBC 2*

PC7/PWM11

PC5/PW M9

PC3*/PW M7*/CEC3*

PC1*/PWM5*/LPD_OUT*

PE3*/PWMB*/DBC1*

DVDD

PC6/PWM10/SPDI F

VCC3.3

C403

10uF 16V

RX2+3

ADC_1V8

VCC3.3

SDA1

PB9

PA3

C424 47pF 50V

HSYNC3

PC4

R458 4K7 1/16W 5%

R417 100R 1/16W 1%

DDCA_SDA3

C401

220N16V

C414

100N16V

FB409

120 OHM

1 2

29

R440

3.9K1/16W

PE0*

VCC3.3

R434

100K 1/16W 5%

PC6

CVDD

+5V_SB

PA5

C473

10uF 16V

C437

NC

C404

100N16V

Audio_SD 7

R407 10 0R 1/ 16W 5%

HDMI1_D1+4

GNDG3

PB7*

CVDD

LEDA

C475

10uF 16V

R436

220K 1/16W 5%

C406

100N16V

TOUCH_POWER

C422

100N16V

VCC1.88

ADC6

CN410

NC/CONN

12345

6

C420

100N16V

FB410

120 OHM

1 2

PB[0..9]

KEY2

R416 100R 1/16W 1%

C417

10uF 16V

PC2*

66

INT-B

MVDD

POWER

LED_A

C426 100N16V

HDMI1_+5V4

LT-SCL 6

PB0

PB6*

+5V_SB

DET_DVI5V

FB401

120 OHM

1 2

C425 100N16V

VCC3.3

+5V_SB

EE_WP

3D SDA

CN407

NC/7PIN

1234567

Mute 7, 8

R471

0R05 1/16W

RSTB

PB4

RX1+3

P30*

99

118

VCC1.8

VCC3.3

C416

10uF 16V

R428

10K 1/16W 5%

RX1-3

5V_DET

PA4

R410 10K 1/16W 5%

DVI5V3

VCC3.3

PB6

PB7

HDMI1_D0+4

AIN_L 7

DET_HDMI1 4

U401 use Heat-sink 090G6250 1 GP

R438

3.9K1/16W

C431

NC

P34*

PC1*

DET_HDMI1_5V

R409 1 00R 1/ 16W 5%

C418

100N16V

PC6

AOUT_L 7

OSCI

C472

100N16V

HDMI1_D0-4

KEY1

R435

0R05 1/16W

Adj_BACKLIGHT 8

RIN3

Q402

LMBT3906LT1G

LT-SDA 6

PC5

MVDD

HDMI1_SCL4

PD4

+5V_SB

SDA1

C423 47pF 50V

LED_G

128

VCC3.3

PA8

R465

NC/0R 05 1/ 16W

DET_VGAI 3

+5V_SB

LEDG

+5V_SB3,4,7,8

87

Audio_EN 8

BIN3

PA3

PWMA*

DVDD

DDC_WP 3,4

VCC3.3

OSCO

U402

Pm25LD020C-SC E

1

2

348

7

6

5

CE#

SO

WP#

GND

VDD

HOLD#

SCK

SI

HDMI1_D2+4

RXC+3

C432 NC/0.1UF50V

AUDIO_VDD

PE1*

MVDD

WP

R424

220K 1/16W 5%

R411

NC/0R 05 1/ 16W

C470

10uF 16V

ADC3

PB2

PB7*

RESET

R426

10K 1/16W 5%

FB402

120 OHM

1 2

R402

100K 1/16W 5%

HDMI1_D1-4

PD5

RX0-3

FB404

120 OHM

1 2

R425

NC/0R 05 1/ 16W

R422

100K 1/16W 5%

VCC1.8

POWER

R448

NC/4K7 1/ 16 W 5 %

CN406

CONN

1234567

CEC_CTRL 4

PA1

3D SCL

CN411

CONN

12345

VSYNC3

AOUT_R 7

R423

0R05 1/16W

VCC3.3

DVI_VCC

FB450

NC/120 OHM

1 2

P34*

21

Meridian 3

Remark: Parts position can be searched by using FIND function in PDF.

PA5

LT-SDA

PB9

LVA0M

RXO3+

RXO3-

LVB2M

RXE3-

RXOC+

RXE0+

RXO1+

RXEC+

LVB0P

RXE2-

RXOC-

LVACKP

R455

220 OHM 1/ 4W

RXEC+

RXO1-

CN409

NC/CONN

246810

12

14

16

18

20

22

24

26

28

30

13579

11

13

15

17

19

21

23

25

27

29

LVB1M

PA3

LVA2P

PB[0..9]5

PB7

LVB2M

LVB0M

LVA1M

LVA2M

LVA3M

LVB1M

C433

NC

RXOC-

RXO2+

RXE1+

LVBCKP

LVA3P

LVACKM

LVB0P

LT-SDA

LVB2P

RXEC-

LT-SDA 5

RXE1+

PB4

RXE0-

CN408

CONN

123456789

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

LVBCKM

PA[0..9]

PA[0..9]5

RXE0-

RXE2+

LVB3P

LVA3P

PB6

PB3

RXEC-

RXOC-

RXEC+

LVA3M

LT-SCL

RXEC-

RXO3-

RXO0+ LVACKP

RXE2-

PB0

LT-SCL

LT-SCLLT-SDA

PA1

RXE3+

LVA1P

PA0

RXOC+

RXO2+

PA9

LVBCKP

PA4

RXE2+

PB5

RXO0-

RXE1-

LT-SCL 5

LVB3MPB8

LVA1M

RXE3-

LVB2P

FB408

120 OHM

1 2

RXE0+

PB[0..9]

LVACKM

PB1

LVB3P

RXO2-

RXOC+

RXO3+

R454

220 OHM 1/ 4W

PA7

PA2

LVA1P

PB2

LVB1P

RXO2-

VLCD

+

C435

100uF/16V

VLCD 8

RXE1-

LVBCKM

PA8

RXO0+

PA6

LVB1P

LVB0M

LVA2P

C436

100N16V

C434

NC

LVA0M

LVA0P

LVA2M

RXE3+

RXO1-

RXO0-

LVA0P

LVB3M

RXO1+

!

22

Meridian 3

Remark: Parts position can be searched by using FIND function in PDF.

MUTE-1

AIN_R 5

R630

100R 1/16W 5%

AOUT_L5

ZD602

NC/MLVS0603M04

1 2

R604

10K 1/16W 5%

G-2

R619 51R 1/10W 5%

R602

1K 1/16W 5%

R627

NC/0 R 05 1/ 1 6W

Volume8

AIN_L 5

C612

1uF 10V

R626

100R 1/16W 5%

U601

PAM8007NHR

1

4

6

24

3

17 8

2

22

23

5

10

20

14

21

15

19

11

718

9

12

16

13

+OUTL

-OUTL

/ MUTE

+OUTR

PGNDL

INR INL

PGNDL

PGNDR

PVDDL

VDC

PVDDR

VREF

-OUTR

LINE/EAR

/ SHDN

Volume

VDDGND

EarInL

EarOutL

EarInR

EarOutR

R622

NC/0R 05 1/16W

FB602 NC/ 120OHM

1 2

R631

10K 1/16W 5%

FB608

NC/120 OHM

12

Q601

LMBT3904LT1G

C618

NC/220pF 50V

CN602

CONN

12345

MUTE5

AIN_R

SE

R611NC / 33K 1/16W 5%

R624

750R 1/16W 5%

FB603 NC/ 120OHM

1 2

R632

10K 1/16W 5%

C608NC/330pF 50V

R618

100K 1/16W 5%

R607

10K 1/16W 5%

+

C619

220uF/16V

R614 NC/ 0R05 1/10W

C610

NC/220N 25V

OUTR

OUT-L+

R610

NC/10K 1/16W 5%

CN601

NC/PH ONEJAC K

12354

R636

NC/0R 05 1/16W

OUT-L-

OUTL

C607 N C/ 1uF 10V

C603

22UF 16V

R613 NC/ 0R05 1/10W

+5V_AUDIO

OUT-L+

+

C620

220uF/16V

AOUT_R5

C606 N C/ 1uF 10V

R

Q603

LMBT3906LT1G

1

23

G-1

R601

10K 1/16W 5%

C630

220nF 10V

OUT-R-

OUTL

C615

NC/220pF 50V

VOL

+

C601

220uF/16V

C621

0.1UF 16V

+5V_AUD IO

C614

1uF 10V

+5V_AUDIO

C631

220nF 10V

Audio_SD5

+5V_AUDIO

OUT-R+

OUT-R-

+5V_AUDIO

AIN_L

R615

NC/750R 1/ 10W 5%

SE

Line/Ear

H: Headphone

L: Class D

AMP

ZD604

NC/MLVS0603M04

1 2

C616

NC/220pF 50V

OUTR

R617

NC/750R 1/ 10W 5%

R603

10K 1/16W 5%

D601

LL4148

CN604

NC/CONN

123

4

R608

10K 1/16W 5%

R605

10K 1/16W 5%

OUT-L-

R606

470R 1/16W 5%

R625

100R 1/16W 5%

R637

NC/0R05 1/ 16W

Modify 2011/01/08

+5V_AUD IO

R621 51R 1/10W 5%

C609NC/330pF 50V

OUTL

FB604 NC/ 120OHM

1 2

+5V_SB3,4,5, 8

MUTE-1

OUTR

ZD603

NC/MLVS0603M04

1 2

R612NC / 33K 1/16W 5%

R609

NC/10K 1/16W 5%

SE-1

FB601

120 OHM

1 2

Q604

LMBT3904LT1G

ZD601

NC/MLVS0603M04

1 2

C617

NC/220pF 50V

FB606

120 OHM

1 2

C605

1uF 10V

OUT-R+

OUTR

C625

1uF 10V

CN603

NC/PHONEJACK

12354

R616

NC/0R 05 1/16W

+5V_AUD IO

OUTL

C623

1uF 10V

R620 100K 1/16W 5%

+5V_SB

C604

100N16V

CN605

NC/CONN

123

SE-1

C611

1uF 10V

C622

NC/220N 25V

C624

10uF 16V

VOL

C613

10uF 16V

FB605 NC/ 120OHM

1 2

C602

100N16V

+5V_AUDIO

L

23

Meridian 3

Remark: Parts position can be searched by using FIND function in PDF.

Q701

LMBT3904LT1G

PC5

C701

100N16V

R705

47K 1/16W 5%

C714

100N16V

R750

0R05 1/16W

Q706

NC/AO3401

Audio_EN 5

+

C703

100uF/16V

on_Panel5

+5V_SB

+

C711

100uF/16V

R717

10K 1/16W 5%

R719

10K 1/16W 5%

+5V_SB

PANEL_ID# 5

DIM

R722

NC

C704

100N16V

VLCD 6

C750

220N16V

U701

NC/G903T63UF

3 2

1

VIN VOUT

GND

R704

47K 1/16W 5%

on_BACKLIGHT 5

Volume

R710

4.7 OHM +-5% 2WS

C717

220N16V

PB2

U704

AP2114D-1.8TRG1

3 2

1

VIN VOUT

GND

+5V_SB

R702 1 K 1/ 16W 5 %

R723

10K 1/16W 5%

+5V_SB

PB1

PWMB*

VCC1.8

C705

100N16V

U702 G1117-33T43UF

1 2 3

ADJ(GND) VOUT(TAB) VIN

C708

100N16V

VLCD

VCC3.3

Q702

LMBT3904LT1G

C712

100N16V

VCC3.3

U703

NC/ G1117-18T63Uf

3 2

1

4

VI VO

GND

4

ON/OFF

C715

100N16V

CN701

CONN

123456789

Q705

AO4449 -7A/-30V

1 2 3 4

8 7 6 5

S S S G

D D D D

PD6

PWMA*

Volume7

VCC3.3

Adj_BACKLIGHT 5

R752

22K 1/16W 5%

R721

56KOHM 1/16W

R701

10K 1/16W 5%

VCC3.3

C709

NC

+

C702

220uF/16V

VCC3.3 5

+5V_SB 3,4,5,7

VCC1.8 5

Mute 5

!

24

Meridian 3

6.2 Power Board

Power 715G4750P02000001S

Remark: Parts position can be searched by using FIND function in PDF.

C913

2N2 500V

R921

1K5 +-1% 1/8W

CN801

NC

12345

GND1

GND

1

2

C931

470pF/1KV

t

NR901

NTCR

1 2

D903

SRF1060

1

2

3

R940

4K7 +-5% 1/8W

R938

NC

5V/2.5A

R905

6.8K 1/4W

R934

1K 1/8W

C915

NC

F902

FUSE

R912

10K 1/4W

R929

NC

C912

100N 50V

+

C902

47uF M 450V

+

C908

330uF 35V

R915

100 OHM 1%

Q901

SMK0870FJ

R918

1.5M 1/4W

F901

FUSE

D901

UF1002FC T

1

2

3

CN903

PHONE JA C K

12354

R913

47 OHM 1/4W

C900

3300pF 250V

Lin

R919

0.47OHM2W

IC902

PC123X2YFZOF

056G 139 3A

12

43

ZD902

TZX22B

1 2

CN802

NC

1

2

C920

680PF 250V

IC903

AS431AZTR-E1

056G 158 10 T

CN902

Wire Harness

1234567

C906

1500PF2KV

C934

1N 50V

ENA

R927

9K1 1/8W 1%

C925

2N2 500V

+

C916

47UF 35V

C923

0.1uF 50V

R903

100KOHM +-5% 2WS

R930

NC

R933

510OHM +-5% 1/8W

CN904

CONN

123

C905

0.22UF275V

+

C910

680uF 10V

T901

POWER X'FMR

1

2

354

689

10

R916

1.5M 1/4W

IC901

LD7750RGR

123

4 5

6

8

OTP

COMPCSGNDOUT

VCC

HV

+

C903

47uF M 450V

R911

22 OHM 1/4W

R909

6.8K 1/4W

+16V

16V/1.5A

+

C911

470uF 16V

Rin

D902

PS1010R

D904

1N4148-B4006

R908

6.8K 1/4W

D905

PS1010R

R931

100KOHM +-5% 1/8W

L903

Coil

R901

47 OHM 1/4W

R914

47 OHM 1/4W

L901

30MH

1

2

4

3

R937 NC

R932

680R

DIM

+16V

HS2

HEAT SINK(D 901)

1

2

C922

1N 50V

FB902

NC

1 2

R902 47 OHM 1/4W

R923

10K 1/8W 1%

R939

0 OHM +-5% 1/8W

R924

10 OHM 1/4W

C926

100N 50V

+

C907

330uF 35V

HS1

HEAT SINK(Q901)

1

2

R920

220 OHM

C919

33N 50V

R935

680R

ENA

C929

100N 50V

C921

680PF 250V

HS3

HEAT SINK(D 903)

1

2

C932

10N 50V

C917

100N 50V

R910

0.47R 1%

R926

10K 1/8W 1%

FB901

BEAD

1 2

R928

NC

-

+

BD901

D2SB80

2

1

3

4

CN901

SOCKET

12

3

GND2

GND

1

2

R917

1.5M 1/4W

C901

2N2 500V

Q903

KTD1028

L902

Coil

+5V

+

C927

330uF 35V

C924

2N2 500V

DIM

+5V

25

Meridian 3

Converter 715G4220P01000004L

Remark: Parts position can be searched by using FIND function in PDF.

R813 10K 1/ 10W 5%

R830 1R 1/ 8W 5%

R828 1R 1/ 8W 5%

+

C813

100uF 50V

R838

0R05OHM1/8W

R823

0R05 1/10W

+12V

Vout

R802NCR803

0.30 OHM +-1% 1/4W

+

C804

33uF 100V

R826

NC

R808

NC

R837 NC

R812

100 OHM 1/10W

C812

100pF 50V

C805

0.47uF 16V

OVP1

R805

120KOHM 1/10W

C816

0.1uF 50V

C808

NC

R804

24K 1/10W 1%

C814

100P 50V

CN802

CONN

123

4

CN801

CONN

1234567

R824

33KOHM 1/10W

CN804

CONN

12345

6

78

R806

10K 1/10W 5%

R839

0R05OHM1/8W

R815

NC

ZD801

SK310B

R801

0.30 OHM +-1% 1/4W

R822

1M 1/8W 5%

R845

100 OHM 1/10W

R842

NC

Q801

P8008HV

123

4 5

678

S2G2S1

G1 D1

D1D2D2

C806

2U2 25V

R833

NC

C815

0.1uF 50V

R829 1R 1/ 8W 5%

L801

47uH

R853

NC

R827

NC

R836

NC

R814

10 OHM 1/10W

ENA

R809

100K 1/10W 5%

CN803

NC

123456789

10

11 12

DIM

R844

NC

R832

0R05 7A 1/4W

R835

NC

R810

1K 1/10W 5%

R834

NC

R807

10R 1/10W

R811

NC

R840

NC

Vout

OVP1

R831 1R 1/ 8W 5%

C801

100N 50V

IC801

TA9690GN

123456789

101112 13

1415161718192021222324

PWM

ISEN1

ISEN2

ISEN3

ISEN4

GNDA

ISEN8

ISEN6

ISEN7

OVP

ISET

RT ENA

ISW

ISEN5

LDR

VREF

GNDP

VIN

SEL

COMP

SSTCMP

NC

STATUS

C807

2.2U16V

C811

NC

R825

0R05 1/4W

!

26

Meridian 3

6.3 Headphone Board 715G4909T01000004S

Remark: Parts position can be searched by using FIND function in PDF.

GND

Earphone_Det

CN007

PHON E JAC K

12354

Headset_R

Ear-phone

CN006

CONN

12345

67

Headset_L

Headset_R

Headset_L

27

Meridian 3

6.4 IR Board (only for 227E3LPH)

715G4595R01000001S

Remark: Parts position can be searched by using FIND function in PDF.

IR_RX-1

VCC

R065

100R 1/ 8W 5%

C059

100N 50V

CN053

CONN

123

IR_RX-1

U053

KSM-603TM2M

1

2

3

VOUT

GND

VCC

!

28

Meridian 3

715G4813T01000004S

Remark: Parts position can be searched by using FIND function in PDF.

PS_OUTPUT

U052

AS358MTR-E1

123

45

678

1OUT

1IN-

1IN+

GND2IN+

2IN-

2OUT

VCC+

PS_ON

C054

100N 16V

ZD054NC/UDZSNP5.6B

1 2

R054

1K 1/16W 5%

CN051

CONN

123

45

C057

100N 16V

Q051

AO3401A

R066

10K+-5%1/16W

R056

1K 1/16W

PS_DISTANCE

VCC VCC

U051

PIC12F615-I/SN

123

4 5

678

VDD

GP5/T1CKI/P1A*/OSC1/CLKIN

GP4/AN3/CIN1-/T1G/P1B*/OSC2/CLKOUT

GP3/T1G*/MCLR/VPP GP2/AN2/T0CKI/INT/COUT/CC P1/P1A

GP1/AN1/CIN0-/VREF/ICSPCLK

GP0/AN0/CIN+/P1B/ICSPDAT

VSS

R063

1K 1/16W 5%

ZD053NC/UDZSNP5.6B

1 2

R059

100K 1/16W 5%

Q053

SST2222A

CN052

CONN

12345

67

PS_OUTPUT

R053

33R 1/8W 5%

PS_OUTPUT

R065

1K 1/16W

R055

10K 1/16W 5%

VCC

PS_DISTANCE

C056

100N 16V

IR_RX

PS_ON

PS_DISTANCE

C052

100N 16V

R052

33R 1/8W 5%

IR_RX

C058

100N 16V

C055

100N 16V

C051 22UF 16V

ZD052NC/UDZSNP5.6B

1 2

VCC

Q052

SST2222A

LED051

LED

12

C053

100N 16V

VCC_IN

R058

100K 1/16W 5%

R062

10K 1/16W 5%

VCC

R057

100K 1/16W 5%

VCC

VCC_IN

PS_ON

VCC_IN

C059 22U F 16V

R064

100R 1/16W 5%

29

Meridian 3

6.5 Key Board 715G4799K01000004F

Remark: Parts position can be searched by using FIND function in PDF.

Power

Button_4

MENU

KEY2

RIGHT

T04

CN401

I2C_SCL

NC

7

1

I2C SCL

INPUT

Button_1

6

LED_White

5

LED G

Button_1U001

CG7246AM

123

4

5

6

7

8

91011

12

13 14 15 16

GP0[0]

GP0[1]

I2C SCL

I2C SDA

GP1[0]

GP1[1]

VSS

GP1[2]

GP1[3]

GP1[4]

XRES

GP0[2]

VDD

GP0[3]

CSInt

GP0[4]

LEFT

Button_2

VCC

KEY1

R002 560R 1/ 16 W 5%

ZD002

NC/UDZSNP5.6B

1 2

I2C_SCL

GND

Button_3

T01

4

Button_3

T02

R003 560R 1/ 16 W 5%

C001

1000pF 50V

MENU

Button_4

I2C_SDA

NC

Button_5

RIGHT

POWER KEY#

3

T05

Button_2

T03

I2C SDA

R006

680OHM +-5% 1/10W

LED R

LED_White

INPUT

R004 560R 1/ 16 W 5%

I2C_SDA

LEFT

Button_5

Buttons

GND

C003

100N 16V

R001 560R 1/ 16 W 5%

LED_White

2

ZD004

NC/UDZSNP5.6B

1 2

VCC

CN001

R005 560R 1/ 16 W 5%

POWER

C002

10uF 6.3V

CN001

CONN

12345

6

78

!

30

Meridian 3

6.6 LED Board 715G4864T01000004F

Remark: Parts position can be searched by using FIND function in PDF.

LED001

LED

2 1

CN002

CONN

1

2

3

4

5 6

LED_white

31

Meridian 3

7. PCB Layout

7.1 Scaler Board 715G4641M0I000004K Remark: Parts position can be searched by using FIND function in PDF.

R117

R621

R619

R420

R429

FB101

FB102

FB103

R617

R615

R613

R614

FB104

FB105

FB106

C603

C601

C619

C620

C702

CN405

FB401

FB406

FB403

FB408

FB601

FB606

R454

R455

U101

U103

U104

U106

U110

U107

U701

U703

X401

U112

Q706

U109

U704

CN401

C432

D406

FB402

FB404

FB405

FB407

CN701

Q705

D101

D102

D103

Q402

Q702

Q401

Q701

Q601

ZD103

ZD101

ZD102

ZD104

D403

D404

D405

C407

C101

C102

C103

C104

C105C106C107

C108

C109

C110

C114

C113

C116

C117

C118

C119

C120

C401

C404

C405

C406

C408

C410

C411

C414

C419

C420

C474

C422

C423

C424

C426

C434

C433

C425

C436

C608

C609

C614

C704

C705

C712

C427

C121

C708

C709

C714

C715

C717

C607

C409

C412

C418

C701

C115

C428

C429

C431

C437

R402

R102

R103

R104

R107

R108R109

R110

R111

R112

R115

R118

R119

R120

R121

R123

R124

R408

R134

R136

R137

R138

R139

R140

R142

R449

R419

R430

R403

R448

R456

R440

R409

R122

R421

R424

R401

R435

R432

R426

R439

R609

R618

R610

R620

R611

R612

R701

R702

R704

R705

R438

R416

R443

R141

R433

R434

R436

R437

R458

R719

R125

R126

R128

R129

R130

R133

R127

R135

R459

R153

R154

R155

R156

R157

R158

R159

R431

R450

R752

R717

R721

R722

R723

R602

R631

R603

R132

R404

R405

R753

R407

R411

R754

R101

R414

R415

R417

R418

R422

R423

R425

R427

R428

R442

R452

R453

R457

R625

U401

FB450

U111

U113

C123

CN408

CN409

C470

C471

CN406

C111

C112

C606

C750

R750

U402

ZD105

C122

C124

C125

C472

C473

R406

R412

R460

R461

R462

R463

FB409

D401

Q101

Q708

C413

C415

C604

R616

C402

C416

C417

C605

C615

C602

D601

R627

R622

R630

C611

C612

C616

C617 C618

C621

C623

C625

C613

C624

R601

R604

R605

R606

R607

R608

R624

R626

R632

FB410

FB411

FB602

FB603

FB604

FB605

Q603

Q604

U601

U702

C403

C475

CN101

CN601

CN603

CN501

CN102

FB608

CN411

C630

C631

R470

R471

CN605

R160

R161

R162

Q102

CN604

CN602

R464

R465

C435

C703

C711

U102

U105

U108

CN404

CN410

CN407

U403

R410

R710

R636

R637

C610

C622

ZD601

ZD602

ZD603

ZD604

!

32

Meridian 3

7.2 Power Board Power 715G4750P02000001S Remark: Parts position can be searched by using FIND function in PDF.

GND1

BD901

C905

C906

C931

D902

D905

FB901

HS1

HS2

HS3

IC902

IC903

L902

L903

NR901

Q903

R919

R932

R935

T901

ZD902

CN802

CN801

J905

J906

J911

J903

J904

J901

J908

J907

J902

J913

J912

FB902

CN903

F902

F901

Q901

CN902

D903

D901

J910

J909

R903

CN804

CN805

FB801

J801

J802

J805

C816

FB802

L801

CN904

GND2

L901

CN901

J915

J916

J917

J804

J803

D904

J914

C900

C920

C921

C907

C908

C927

C902A

C903A

C903

C902

C910

C911

C916

C809

C801

C901

C912

C913

C915

C917

C919

C922

C923

C924

C925

C926

C929

C934

R901

R902

R905R908R909

R910

R911

R912

R913

R914

R915

R916

R917

R918

R920

R921

R923

R924

R926

R927

R928R929R930

R931

R933

R934

R937

R938

R939

C802

C810

C811

C812

C813

C815

R802

R804

R807

R808

R809

R810

R811

R815

R816

R820

R822

R813

R812

U801

Q801

R801

C804

C805

C806

C807

C808

R805

R806

R821

R814

D801

C803

C814

R803

R819

R817

R818

C932 R940

IC901

33

Meridian 3

Converter 715G4220P01000004L Remark: Parts position can be searched by using FIND function in PDF.

!

34

Meridian 3

7.3 Headphone Board 715G4909T01000004S Remark: Parts position can be searched by using FIND function in PDF.

CN006

CN007

7.4 IR Board (only for 227E3LPH) 715G4595R01000001S Remark: Parts position can be searched by using FIND function in PDF.

CN053

U053

C059

R065

715G4813T01000004S Remark: Parts position can be searched by using FIND function in PDF.

C052

C053

R065

R055

ZD052

ZD053

ZD054

C051

CN052

CN051

C059

Q053

R052

R053

C054

C055

C056

C057

C058

LED051

R054

R056

R057

R058

R059

R062

R063

R064

U051

U052

Q052

R066

Q051

35

Meridian 3

7.5 Key Board 715G4799K01000004F Remark: Parts position can be searched by using FIND function in PDF.

C002

CN001

R006

ZD002

ZD004

T01

T02

T03

T04

T05

U001

C001

C003

R001

R002

R003

R004

R005

7.6 LED Board 715G4864T01000004F Remark: Parts position can be searched by using FIND function in PDF.

LED001

CN002

!

36

Meridian 3

8. Wiring Diagram

227E3LH

Panel

Power Board

Converter

Board

Scaler Board

Scaler

CN901

CN801

CN802

CN804

CN902

1

7

CN501

CN102

CN101

CN701

19

CN404

1

7

CN408

CN602

1

5

CN002

LED Board

CN001

Key Board

CN006

Headphone Board

CN007

37

Meridian 3

227E3LPH

Panel

Power Board

Converter

Board

Scaler Board

Scaler

CN901

CN801

CN802

CN804

CN902

1

7

CN501

CN102

CN101

CN701

19

CN404

1

7

CN408

CN411

15

CN602

1

5

CN002

LED Board

IR Board

CN053

CN001

Key Board

IR Board

CN052

CN006

Headphone Board

CN007

CN051

!

38

Meridian 3

9. Scaler Board Overview

Scale

r

IC

DC-DC

Flash ROM

DVI EEPROM

VGA EEPROM

FFC Connecto

r

Audio

HDMI EEPROM

39

Meridian 3

10. Mechanical Instructions

Note: Take the 227E3LPH for example (the way of 227E3LH disassembly is almost the same as 227E3LPH)

Step 1: Remove the stand base ASSY

1. Place the monitor face on a safe surface, and

remove the COVER HINGE.

2. Remove the four screws to remove the stand base

ASSY from the monitor.

Step 2: Remove the rear cover

1. Open the latches and along the red arrowhead direction as the picture to open other latches.

2. Disconnect the cable and remove the one screw to remove the Headphone Board.

!

40

Meridian 3

Step 3: Remove the bezel

1. Remove the two screws to remove the IR boards.

2. Disconnect the cables to remove the key board and LED board.

Step 4: Remove the mainframe

1. Disconnect the FFC cable.

2. Disconnect the lamp cable.

Step 5: Remove the boards

1. Remove the five screws that secure the connectors.

2. Remove the eight screws to remove the power board and scaler board from the main frame.

3. Disconnect all the connectors.

41

Meridian 3

11. Repair Flow Chart

1. No Power

OK

NG

No power

Check power cable is

tightened?

Check Power “On/Off”

is “On”?

Re-plug the power cable

Replace main board and check connections

Check the LED

indicator is OK?

Check the AC power

Replace the power board and check connections

OK

NG

OK

NG

Turn on the Power “On/Off” switch

Replace key board and check connections

NG

!

42

Meridian 3

2. No Video (Power LED White)

No Video (Power LED White)

Press the power

button is OK?

Check the FFC cable

or panel

The end

NG

OK

NG

Replace the main board

Replace the power

board and connection

Replace the FFC cable or panel

NG

The end

Replace the key board

NG

OK

Replace the main

board and connection

OK

43

Meridian 3

3. DIM

OK

The end

OK

The end

OK

The end

DIM (image overlap, focus or flicker)

Reset in factory mode

Set to the optimal

frequency, select the

recommended fre

q

uenc

y

Pull out signal cable and check “Self Test Feature

Check” is ok?

Check the signal cable and the PC

Readjust the phase and pixel

clock in the user mode

Replace the main board

Replace the panel

NG

OK

NG

OK

The end

OK

NG

!

44

Meridian 3

4. Color is not optimal

NG

Color is not optimal

Miss color

Color shift

Replace the signal cable

Pull out the signal cable

and check the screen

color display is normal?

The end

Replace the signal cable or PC

Reset the factory mode

In the user mode, set the “color settings” until customer satisfy

Replace the main board

NG

OK

NG

OK

NG

45

Meridian 3

12. ISP Instruction

Note: Take the 227E3LPH ISP SOP for example (the 227E3LH SOP is almost the same as 227E3LPH)

When do the parts, need the tools as follow:

1. An i486 (or above) person al computer or compatible.

2. Microsoft operation system Windows 95/98/2000/XP.

3. USB port driver and ISP tool “EasyWrite V2011.exe”

4. ISP JIG (715GT089-B/C) x1

5. Power cable x 2, VGA cable x1, USB cable x 1

6. The monitor and the new software

12.1. Connection

12.2 Install the USB driver

When insert the USB cable to PC USB port, will pop up a Hardware Wizard to help you install the USB driver if you use this ISP board first time. You can install it successfully as the below instruction step by step. Remark: The USB driver files path: D:\FTC100103(Mstar)\FTCUSB.INF

!

46

Meridian 3

Click “Finish” to complete the USB serial port driver installation.

47

Meridian 3

12.3 Install the ISP tool and run it:

1. Double-click to install ISP program.

2. Double-click

to run the ISP tool.

3. Set the parameters to restore the HDCP key.

1

2

3

!

48

Meridian 3

4. Setup ISP tool. Click “Setup ISP tool” to open the configuration window.

5. Configuration for ISP tool. Tick “FTDI”.

1

2

1

2

3

49

Meridian 3

6. Load the F/W you want to upgrade.

7. Start to program. Click “Auto” to start programming.

1

2

3

!

50

Meridian 3

8. Programing success. There will be the message in the red frame after successful programming.

12.4 Check the firmware version and reset the factory setting

Check the firmware version

1. Connect the video source and power off the monitor .

2. Press and buttons at the same time, power on the monitor, and then press the menu again; the picture will appear on the top left corner.

3. Select the “Factory” and press the “MENU” button to enter the factory mode.

4. Please do “Auto Color” in factory menu after change main board and upgrade F/W.

5. Power off to exit the factory mode.

51

Meridian 3

Reset the factory setting

1. Power on the monitor and open the user menu.

2. Do factory reset: Setup – Reset – Yes.

3. Factory reset will turn off “Burn in” mode which screen color switches among red, green, blue and black.

12.5 Troubleshooting:

When can’t upgrade, please retry below several ways to upgrade. (1) When the tool appears erase error, you can change another version tool to try. (2) The program must be in the monitor standby state, while the fail communication with monitor might result the

monitor power off. In this situation, you may AC off the monitor for a while and then AC on to retry. Maybe the

defect will be cured. (3) Change ISP JIG or cable. (4) Change PC

!

52

Meridian 3

13. DDC Instruction

Note: Take the 227E3LPH EDID SOP for example (the 227E3LH SOP is almost the same as 227E3LPH)

General

DDC Data Re-programming In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect repaired monitor’ the serial numbers have to be re-programmed.

It is advised to re- soldered the main EEPROM with Software DDC from the old board onto the new board if circuit board have been replaced, in this case the DDC data does not need to be re-pro grammed.

Additional information about DDC (Display Data Channel) may be obtained from Video Electronics Standards Association (VESA). Extended Display Identification Data (EDID) information may be also obtained from VESA.

1. An i486 (or above) personal computer or compatible.

2. Microsoft operation system Windows 95/98/2000/XP.

3. LPT port driver “PORT95NT.exe” and EDID tool “HDMISinglePort.exe”

4. EDID JIG (715GT034-B) x1,

5. LPT cable (male to male) x1, VGA cable x 1, DVI to HDMI cable x 1

6. 12V DC power source

7. The monitor and the EDID data

13.1 Connect the ISP board, PC and monitor as follow:

13.2 Install the LPT drive

1. Double click the icon to install the driver.

2. Restart the PC after the LPT driver installation

53

Meridian 3

13.3 Prepare the EDID written

1. Rename the analog EDID to “wa.dat”, digital EDID to “wd.dat” and HDMI EDID to “wh.dat”.

2. Put the EDID data and “config.ini” files into one folder named Philips 227E3LPH.

3. Copy the folder named Philips 227E3LPH to the “DDC” folder (It must be “DDC” instead of other names), and put the “DDC” folder and “HDMISinglePort.exe” into the same folder.

13.4 The process of writing EDID and SN

1. Double-click the icon to open the tool.

!

54

Meridian 3

2. Choose the Analog +DVI ”, and click “Loadfile” to set the p arameters as the below picture:

3. Click the “Next” to load the EDID file.

55

Meridian 3

4. Select the “Philips 227elph” and then click “OK”, the tool will read the EDID information:

5. Choose the “Only connect HDMI” and “Write SN”, and key in the 14 digital S/N that must be the same as the S/N in the monitor barcode.

!

56

Meridian 3

6. Click the “Program” to start programming after monitor power on. When it shows “Analog: PASS!, SN write OK!, DVI: PASS! and HDMI: PASS!”. The EDID and SN writing process are finished.

13.5 Check the SN

1. Connect the video source and power on monitor.

2. Press the “MENU” button to enter the user menu, and then check the 14 digital SN.

3. If this SN number is the same as what we had written by EDID tool, the EDID and SN writing is completed finally

57

Meridian 3

227E3LH EDID Analog

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

-----------------------------------------------

00| 00 FF FF FF FF FF FF 00 41 0C 7B C0 94 BA 0A 00 10| 34 14 01 03 6E 30 1B 78 2A 0A 45 A7 54 4A 99 25 20| 11 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32 50| 34 36 39 38 37 30 33 31 32 34 00 00 00 FC 00 32 60| 32 37 45 4C 48 0A 20 20 20 20 20 20 00 00 00 FD 70| 00 38 4C 1E 53 11 00 0A 20 20 20 20 20 20 00 76

EDID Structure Version/Revision: 01 03

<-Vendor/Product Identification: -> ID Manufacturer Name: PHL ID Product Code: C07B ID Serial Number: 703124 Week of Manufacture: 52 Year of Manufacture: 2010

<-Basic Display Parameters/Features: -> Video i/p definition: Analog Max. H. Image Size: 48cm Max. V. Image Size: 27cm Display Gamma: 2.2

<-Color Characteristics: -> Rx: 0.652 Gx: 0.291 Bx: 0.146 Wx: 0.313 Ry: 0.328 Gy: 0.600 By: 0.066 Wy: 0.329

<-Established T imings: -> Established Timings 1: BD 720 x 400 @ 70Hz VGA, IBM 640 x 480 @ 60Hz VGA, IBM 640 x 480 @ 67Hz Apple, Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA

!

58

Meridian 3

800 x 600 @ 60Hz VESA Established Timings 2:4B 800 x 600 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 75Hz VESA 1280 x1024 @ 75Hz VESA Established Timings 3:00

<-Standard Timing Identification: -> 1920 x 1080 @ 60Hz 1280 x 1024 @ 60Hz 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz

<-Detailed Timing Descriptions: -> FC (Monitor Name): 227ELH FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max. H. rate: 83 KHz Max. P Clock: 170 MHz FF (Monitor SN): 1324698703124 Detailed Timing: 1920x1080 @ 60Hz

Extension Flag: 00 Block0 Checksum: 76

Digital

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

-----------------------------------------------

00| 00 FF FF FF FF FF FF 00 41 0C 7B C0 94 BA 0A 00 10| 34 14 01 03 80 30 1B 78 2A 0A 45 A7 54 4A 99 25 20| 11 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32

59

Meridian 3

50| 34 36 39 38 37 30 33 31 32 34 00 00 00 FC 00 32 60| 32 37 45 4C 48 0A 20 20 20 20 20 20 00 00 00 FD 70| 00 38 4C 1E 53 11 00 0A 20 20 20 20 20 20 00 64

EDID Structure Version/Revision: 01 03

<-Vendor/Product Identification: -> ID Manufacturer Name: PHL ID Product Code: C07B ID Serial Number: 703124 Week of Manufacture: 52 Year of Manufacture: 2010

<-Basic Display Parameters/Features: -> Video i/p definition: Digital Max. H. Image Size: 48cm Max. V. Image Size: 27cm Display Gamma: 2.2

<-Color Characteristics: -> Rx: 0.652 Gx: 0.291 Bx: 0.146 Wx: 0.313 Ry: 0.328 Gy: 0.600 By: 0.066 Wy: 0.329

<-Established T imings: -> Established Timings 1: BD 720 x 400 @ 70Hz VGA, IBM 640 x 480 @ 60Hz VGA, IBM 640 x 480 @ 67Hz Apple, Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 60Hz VESA Established Timings 2:4B 800 x 600 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 75Hz VESA 1280 x1024 @ 75Hz VESA Established Timings 3:00

!

60

Meridian 3

<-Standard Timing Identification: -> 1920 x 1080 @ 60Hz 1280 x 1024 @ 60Hz 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz

<-Detailed Timing Descriptions: -> FC (Monitor Name): 227ELH FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max. H. rate: 83 KHz Max. P Clock: 170 MHz FF (Monitor SN): 1324698703124 Detailed Timing: 1920x1080 @ 60Hz

Extension Flag: 00 Block0 Checksum: 64

HDMI

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

--------------------Block 0--------------------

00| 00 FF FF FF FF FF FF 00 41 0C 7B C0 94 BA 0A 00 10| 34 14 01 03 80 30 1B 78 2A 0A 45 A7 54 4A 99 25 20| 11 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32 50| 34 36 39 38 37 30 33 31 32 34 00 00 00 FC 00 32 60| 32 37 45 4C 48 0A 20 20 20 20 20 20 00 00 00 FD 70| 00 38 4C 1E 53 11 00 0A 20 20 20 20 20 20 01 63

--------------------Block 1--------------------

00| 02 03 22 F1 4F 01 02 03 05 06 07 10 11 12 13 14 10| 15 16 1F 04 23 09 17 07 83 01 00 00 65 03 0C 00 20| 10 00 02 3A 80 18 71 38 2D 40 58 2C 45 00 E0 0C 30| 11 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00

61

Meridian 3

40| E0 0C 11 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 50| 55 00 E0 0C 11 00 00 1E 8C 0A D0 90 20 40 31 20 60| 0C 40 55 00 E0 0C 11 00 00 18 00 00 00 00 00 00 70| 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41

-------------------------------------------------------

Block 0:

EDID Structure Version/Revision: 01 03 <-Vendor/Product Identification: -> ID Manufacturer Name: PHL ID Product Code: C07B ID Serial Number: 703124 Week of Manufacture: 52 Year of Manufacture: 2010

<-Basic Display Parameters/Features: -> Video i/p definition: Digital Max. H. Image Size: 48cm Max. V. Image Size: 27cm Display Gamma: 2.2

<-Color Characteristics: -> Rx: 0.652 Gx: 0.291 Bx: 0.146 Wx: 0.313 Ry: 0.328 Gy: 0.600 By: 0.066 Wy: 0.329

<-Established T imings: -> Established Timings 1: BD 720 x 400 @ 70Hz VGA, IBM 640 x 480 @ 60Hz VGA, IBM 640 x 480 @ 67Hz Apple, Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 60Hz VESA Established Timings 2:4B 800 x 600 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 75Hz VESA 1280 x1024 @ 75Hz VESA Established Timings 3:00

!

62

Meridian 3

<-Standard Timing Identification: -> 1920 x 1080 @ 60Hz 1280 x 1024 @ 60Hz 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz

<-Detailed Timing Descriptions: -> Detailed Timing: 1920x1080 @ 60Hz FF (Monitor SN): 1324698703124 FC (Monitor Name): 227ELH FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max. H. rate: 83 KHz Max. P Clock: 170 MHz

Extension Flag: 01 Block0 Checksum: 63

-------------------------------------------------------

Block 1:

Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte: 22 DTV Underscan YES DTV Basic Audio YES YCbCr (4:4:4) YES YCbCr (4:2:2) YES

<-Video Short Block Description: -> 640 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 16:9 1920 x 1080 I 59.94/60Hz 16:9

63

Meridian 3

720(1440) x 480 I 59.94/60Hz 4:3 720(1440) x 480 I 59.94/60Hz 16:9 1920 x 1080 P 59.94/60Hz 16:9 720 x 576 P 50Hz 4:3 720 x 576 P 50Hz 16:9 1280 x 720 P 50Hz 16:9 1920 x 1080 I 50Hz 16:9 720(1440) x 576 I 50Hz 4:3 720(1440) x 576 I 50Hz 16:9 1920 x 1080 P 50Hz 16:9 1280 x 720 P 59.94/60Hz 16:9

<-Audio Short Block Description: -> Numbers of Audio Channels: 2 Audio Format Description: Linear PCM Audio Supported: 96KHz 48KHz 44KHz 32 KHz Audio Bit Rate: 24bit 20bit 16bit

<-Speaker Allocation: -> Speaker Allocation: FL/FR

<-Detailed Timing Descriptions: ->

Detailed Timing Descriptions: 1920x1080 @ 60Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 148 Hz Refreshed Mode: Non-Interlaced

Detailed Timing Descriptions: 720x480 @ 60Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 27 Hz Refreshed Mode: Non-Interlaced

Detailed Timing Descriptions: 1280x720 @ 60Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 74 Hz Refreshed Mode: Non-Interlaced

Detailed Timing Descriptions: 720x576 @ 50Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 27 Hz Refreshed Mode: Non-Interlaced

Block1 Checksum: 41

!

64

Meridian 3

227E3LPH EDID Analog

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

-----------------------------------------------

00| 00 FF FF FF FF FF FF 00 41 0C 7A C0 94 BA 0A 00 10| 34 14 01 03 6E 30 1B 78 2A 0A 45 A7 54 4A 99 25 20| 11 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32 50| 34 36 39 38 37 30 33 31 32 34 00 00 00 FC 00 32 60| 32 37 45 4C 50 48 0A 20 20 20 20 20 00 00 00 FD 70| 00 38 4C 1E 53 11 00 0A 20 20 20 20 20 20 00 47

EDID Structure Version/Revision: 01 03

<-Vendor/Product Identification: -> ID Manufacturer Name: PHL ID Product Code: C07A ID Serial Number: 703124 Week of Manufacture: 52 Year of Manufacture: 2010

<-Basic Display Parameters/Features: -> Video i/p definition: Analog Max. H. Image Size: 48cm Max. V. Image Size: 27cm Display Gamma: 2.2

<-Color Characteristics: -> Rx: 0.652 Gx: 0.291 Bx: 0.146 Wx: 0.313 Ry: 0.328 Gy: 0.600 By: 0.066 Wy: 0.329

<-Established T imings: -> Established Timings 1: BD 720 x 400 @ 70Hz VGA, IBM 640 x 480 @ 60Hz VGA, IBM 640 x 480 @ 67Hz Apple, Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA

65

Meridian 3

800 x 600 @ 60Hz VESA Established Timings 2:4B 800 x 600 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 75Hz VESA 1280 x1024 @ 75Hz VESA Established Timings 3:00

<-Standard Timing Identification: -> 1920 x 1080 @ 60Hz 1280 x 1024 @ 60Hz 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz

<-Detailed Timing Descriptions: -> FC (Monitor Name): 227ELPH FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max. H. rate: 83 KHz Max. P Clock: 170 MHz FF (Monitor SN): 1324698703124 Detailed Timing: 1920x1080 @ 60Hz

Extension Flag: 00 Block0 Checksum: 47

!

66

Meridian 3

Digital

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

-----------------------------------------------

00| 00 FF FF FF FF FF FF 00 41 0C 7A C0 94 BA 0A 00 10| 34 14 01 03 80 30 1B 78 2A 0A 45 A7 54 4A 99 25 20| 11 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32 50| 34 36 39 38 37 30 33 31 32 34 00 00 00 FC 00 32 60| 32 37 45 4C 50 48 0A 20 20 20 20 20 00 00 00 FD 70| 00 38 4C 1E 53 11 00 0A 20 20 20 20 20 20 00 35

EDID Structure Version/Revision: 01 03

<-Vendor/Product Identification: -> ID Manufacturer Name: PHL ID Product Code: C07A ID Serial Number: 703124 Week of Manufacture: 52 Year of Manufacture: 2010

<-Basic Display Parameters/Features: -> Video i/p definition: Digital Max. H. Image Size: 48cm Max. V. Image Size: 27cm Display Gamma: 2.2

<-Color Characteristics: -> Rx: 0.652 Gx: 0.291 Bx: 0.146 Wx: 0.313 Ry: 0.328 Gy: 0.600 By: 0.066 Wy: 0.329

<-Established T imings: -> Established Timings 1: BD 720 x 400 @ 70Hz VGA, IBM 640 x 480 @ 60Hz VGA, IBM 640 x 480 @ 67Hz Apple, Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 60Hz VESA

67

Meridian 3

Established Timings 2:4B 800 x 600 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 75Hz VESA 1280 x1024 @ 75Hz VESA Established Timings 3:00

<-Standard Timing Identification: -> 1920 x 1080 @ 60Hz 1280 x 1024 @ 60Hz 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz

<-Detailed Timing Descriptions: -> FC (Monitor Name): 227ELPH FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max. H. rate: 83 KHz Max. P Clock: 170 MHz FF (Monitor SN): 1324698703124 Detailed Timing: 1920x1080 @ 60Hz

Extension Flag: 00 Block0 Checksum: 35

!

68

Meridian 3

HDMI

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

--------------------Block 0--------------------

00| 00 FF FF FF FF FF FF 00 41 0C 7A C0 94 BA 0A 00 10| 34 14 01 03 80 30 1B 78 2A 0A 45 A7 54 4A 99 25 20| 11 50 54 BD 4B 00 D1 C0 81 80 95 0F 95 00 B3 00 30| 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 40| 45 00 E0 0C 11 00 00 1E 00 00 00 FF 00 31 33 32 50| 34 36 39 38 37 30 33 31 32 34 00 00 00 FC 00 32 60| 32 37 45 4C 50 48 0A 20 20 20 20 20 00 00 00 FD 70| 00 38 4C 1E 53 11 00 0A 20 20 20 20 20 20 01 34

--------------------Block 1--------------------

00| 02 03 22 F1 4F 01 02 03 05 06 07 10 11 12 13 14 10| 15 16 1F 04 23 09 17 07 83 01 00 00 65 03 0C 00 20| 10 00 02 3A 80 18 71 38 2D 40 58 2C 45 00 E0 0C 30| 11 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 40| E0 0C 11 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 50| 55 00 E0 0C 11 00 00 1E 8C 0A D0 90 20 40 31 20 60| 0C 40 55 00 E0 0C 11 00 00 18 00 00 00 00 00 00 70| 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41

-------------------------------------------------------

Block 0:

EDID Structure Version/Revision: 01 03 <-Vendor/Product Identification: -> ID Manufacturer Name: PHL ID Product Code: C07A ID Serial Number: 703124 Week of Manufacture: 52 Year of Manufacture: 2010

<-Basic Display Parameters/Features: -> Video i/p definition: Digital Max. H. Image Size: 48cm Max. V. Image Size: 27cm Display Gamma: 2.2

<-Color Characteristics: -> Rx: 0.652 Gx: 0.291 Bx: 0.146 Wx: 0.313 Ry: 0.328 Gy: 0.600 By: 0.066 Wy: 0.329

69

Meridian 3

<-Established T imings: -> Established Timings 1: BD 720 x 400 @ 70Hz VGA, IBM 640 x 480 @ 60Hz VGA, IBM 640 x 480 @ 67Hz Apple, Mac II 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 60Hz VESA Established Timings 2:4B 800 x 600 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 75Hz VESA 1280 x1024 @ 75Hz VESA Established Timings 3:00

<-Standard Timing Identification: -> 1920 x 1080 @ 60Hz 1280 x 1024 @ 60Hz 1440 x 900 @ 75Hz 1440 x 900 @ 60Hz 1680 x 1050 @ 60Hz

<-Detailed Timing Descriptions: -> Detailed Timing: 1920x1080 @ 60Hz FF (Monitor SN): 1324698703124 FC (Monitor Name): 227ELPH FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max. H. rate: 83 KHz Max. P Clock: 170 MHz

Extension Flag: 01 Block0 Checksum: 34

!

70

Meridian 3

-------------------------------------------------------

Block 1:

Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte: 22 DTV Underscan YES DTV Basic Audio YES YCbCr (4:4:4) YES YCbCr (4:2:2) YES

<-Video Short Block Description: -> 640 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 16:9 1920 x 1080 I 59.94/60Hz 16:9 720(1440) x 480 I 59.94/60Hz 4:3 720(1440) x 480 I 59.94/60Hz 16:9 1920 x 1080 P 59.94/60Hz 16:9 720 x 576 P 50Hz 4:3 720 x 576 P 50Hz 16:9 1280 x 720 P 50Hz 16:9 1920 x 1080 I 50Hz 16:9 720(1440) x 576 I 50Hz 4:3 720(1440) x 576 I 50Hz 16:9 1920 x 1080 P 50Hz 16:9 1280 x 720 P 59.94/60Hz 16:9

<-Audio Short Block Description: -> Numbers of Audio Channels: 2 Audio Format Description: Linear PCM Audio Supported: 96KHz 48KHz 44KHz 32 KHz Audio Bit Rate: 24bit 20bit 16bit

<-Speaker Allocation: -> Speaker Allocation: FL/FR

<-Detailed Timing Descriptions: ->

Detailed Timing Descriptions: 1920x1080 @ 60Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 148 Hz Refreshed Mode: Non-Interlaced

71

Meridian 3

Detailed Timing Descriptions: 720x480 @ 60Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 27 Hz Refreshed Mode: Non-Interlaced

Detailed Timing Descriptions: 1280x720 @ 60Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 74 Hz Refreshed Mode: Non-Interlaced

Detailed Timing Descriptions: 720x576 @ 50Hz H Image Size: 480 mm V Image Size: 268 mm Pixel Clock: 27 Hz Refreshed Mode: Non-Interlaced

Block1 Checksum: 41

!

72

Meridian 3

14. White Balance, Luminance Adjustment

1. Apparatuses and program: analyzer CA-210, PC, tool, FGA adjustment program (PHILIPS 227E3LH &

227E3LPH.DDCI), Pattern generator.

2. Equipment installation:

a. Connect analyzer CA-210 to PC by USB connector, inst all drive p rogram CA-SDK Ver4.00 for CA-210 and restart

PC after finish installing b. Install Port95NT drive program, set PC printer connector mode as ECP mode and reset PC after finish installing. c. Connect tool as follow: Note: It’s not necessary to connect Port2.

3. Adjustment

Preparation before adjustment: a. Monitor should be warmed up for more than half an hour . b. Make sure that the tools are connected right and drive programs have been installed OK.

4. Adjustment process:

a. Press the power of CA-210, shut off the lens, press 0-Cal and open the lens after analyzer reset. b. Open white balance adjustment program, select the right parameter according with the program and click OK. c. Make sure that the lens of CA-210 aims at the center of the screen, then click START to adjust. d. After finish adjusting, the adjustment program displays pass, and the START button changes for NEXT, which

means that you can adjust another monitor.

To PC LPT

To BSG-265A or e

q

uivalent instrument

To PC Port 2

Philips model

73

Meridian 3

5. Color Temp confirmation

Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.

CIE

coordinates

11500K

9300K

8200K 7500K

6500K/sRGB sRGB

5000K

x 0.270±0.02 0.283±0.02 0.291±0.02 0.298±0.02 0.313±0.02 0.313±0.02 0.345±0.02 y 0.281±0.02 0.297±0.02 0.306±0.02 0.314±0.02 0.329±0.02 0.329±0.02 0.357±0.02

6. How to enter into the factory mode:

1. Connect the video source and power off the monitor .

2. Press and buttons at the same time, power on the monitor, and then press the menu again; the

picture will appear on the top left corner.

3. Select the “Factory” and press the “MENU” button to enter the factory mode.

!

74

Meridian 3

15. Monitor Exploded View

75

Meridian 2

!

76

Meridian 3

16. Recommended & Spare Parts List

Recommended Parts List for 227E3LHSU/00

Item Location PCM Codes Description Remark

1 FQ106 A34G2574AMCB1M0100 BEZEL L215WA-Uph1 2 FQ401 078G020A 5 V SPEAKER 6 OHM 2W 26.8X13.8mm 370/200mm 3 FQ004 KEPCAQP3 KEY BOARD ASSY 4 FQ015 LEPCAQP1 LED BOARD ASSY 5 E750 750GBM215GE012M0PH LCD M215HGE-L10 C1(CC) NB CMI 5 E750 750GBM215GE012N000 LCD M215HGE-L10 C1(CC) NB CMI 5 E750 750GBG215W4E73M0PH LCD LM215WF4-TLE7 GZ LGD 5 E750 750GBG215W4E73N000 LCD LM215WF4-TLE7 GZ LGD 6 FQ003 PLPCAB521MQBN POWER BOARD ASSY CMI 6 FQ003 PLPCAB521GQBJ POWER BOARD ASSY LGD 7 FQ002 756GQACB PL002 00 SCALER BOARD ASSY(CBPCANUP1Q1) CMI 7 FQ002 756GQACB PL004 00 SCALER BOARD ASSY(CBPCANUP1Q1) LGD 8 FQ014 HJPFAQP1 HEADPHONE BOARD ASSY 9 FQ124 A15G1621M01101 MAIN_FRAME CMI

9 FQ124 A15G1621G01101 MAIN_FRAME L215WA-Uph1-s1 LGD 10 FQ105 A34G2575AFL 1B0100 REAR COVER L215WA-Uph1 CMI 10 FQ105 A34G2575AFL 5B0100 REAR COVER L215WA-Uph1 LGD 11 FQ110 A37G0251011 HINGE 21.5 12 FQ112 A34G2576AFL 1B0100 STAND 13 FQ109 A34G2577AFL 1B0100 BASE L215WA-s1

E08904 089G 1735 6C553 AUDIO CABLE 1800MM E08902 089G 725HAA 2G D-SUB CABLE 1500MM FQ304 089G179J30N576 FFC CABLE 30P 195mm P1.0MM E08901 089G404A1 5N IS AC POWER CORD 1500 U402 100GPNGI00BNT1 MCU ASSY(056G2233 11) CMI U402 100GPNGI00CNT1 MCU ASSY(056G2233 11) LGD X401 093G 2251B J CRYSTAL 12MHZ NXS12.000AC30F-KAB10 U401 056G 562392 SCALER NT68677UMFG/E QFP-128 U704 056G 563218 IC LDO AP2114D-1.8TRG1 1A/1.8V TO-252 U702 056G 563512 IC G1117-33T43UF 1A/3.3V TO-252 U601 056G 616110 AUDIO PAM8007NHR 3W SSOP-24 U110 056G 662 21 IC AOZ8804DI DFN-10 U106 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U402 056G2233 1 1 IC Pm25LD020C-SCE SIOC-8(150mil) 2M IC902 056G 139 3A PC123Y22FZOF SHARP T901 080GL19P 17 N1 XFMR 500UH 5% 10UH YUVA-1738 PQ38 CMI T901 080GL19P 17DN1 XFMR 500UH 5% 10UH LZ.PJ004.R00 PQ38 LGD IC801 056G 379185 AC/DC CONVERTER TA 9690GN-A1-0-TR SOP-24 IC901 056G 379190 AC/DC CONVERTER LD7750RGR SOP-7

77

Meridian 3

IC903 056G 563354 Shunt. Reg. TL431-A-TA TO-92 F902 084G 56 4W FUSE 4A 250V CMI F902 084G 56 4 B FUSE 4A 250V LGD U001 056G 669 10 TOUCH KEY CG7246AMT QFN-16(COL)

Spare Parts List for 227E3LHSU/93

Location PCM Codes Description

ECN604 078G020A 5 V SPEAKER 6 OHM 2W 26.8X13.8mm 320/140mm

E08904 089G 17356C553 AUDIO CABLE 1800MM E08906 089G1745HAA AC DVI CABLE E08905 089G179J30N576 FFC CABLE 30P 195mm P1.0MM E08901 089G414A15N IS POWER CORD 1500MM China Reg.

E09501 095G176X 6H20 FFC CABLE 6PIN 154MM P1.0MM ECN602 095G8014 5D 66 HARNESS 5P-5P 200mm FQE102634I ECN406 095G8014 7D 29 HARNESS 7P-4P+6P 180+520mm

E750 750GBG215W4E73M0PH LCD LM215WF4-TLE7 GZ LGD

E750 750GBG215W4E73N000 LCD LM215WF4-TLE7 GZ LGD FQ118 A33G1200AFL 1L0100 COVER HINGE FQ106 A34G2574AMCB1M0130 BEZEL L215WA-Uph1 FQ105 A34G2575AFL 5B0130 REAR COVER L215WA-Uph1 FQ109 A34G2577AFL 1B0120 BASE L215WA-s1 FQ206 Q41G78S181343A QSG 227E3LH (M3227ELHQ1T) FQ202 Q44GB068813 2A CARTON FQ212 Q45G 88609197 EPE BAG FQ204 Q70G22C181311A CD MANUAL 227E3 (M3227E1T) FQ201 Q40G 22N81333A rating label for 227E3L CHINA FQ124 A15G1621G01101 MAIN_FRAME L215WA-Uph1-s1 FQ110 A37G0251011 HINGE 21.5 FQ125 A34G2576AFL 1B0100 STAND FQ205 803GQA44231 L215WA-Uph1-s1 227E3L EPS ASSY FQ002 CBPCANUP1Q3 SCALER BOARD ASSY FQ002 756GQACB PL009 00 SCALER BOARD ASSY(CBPC*)

U402 100GPNGI00CNT1 MCU ASSY(056G2233 11) CN604 033G3802 4B Y L CONNECTOR 4P 2.0 CN602 033G3802 5B Y L CONNECTOR 5P 2.0 CN406 033G3802 7B Y WAFER CN701 033G3802 9B Y CONNECTOR 9P 2.0 CN408 033G801930F CH JS FFC CONN 1.0mm 30P R/A 34mm 6.3mm

R710 061G152M47964E SY RST MOFR 4.7 OHM +-5% 2WS FUTABA

C435 067G315M1013HV

105 ᓖ 100UF,M,16V

C702 067G315M2213HV

105 ᓖ,220UF,M,16V

CN101 088G 35315FVCL HF HF D-SUB CONN V/T 15P BLUE H=10.4

!

78

Meridian 3

CN102 088G 35424F VC HF DVI CONN V/T 24P H=10.4 WITH SCREW HF

U401 090G6250 1 GP HEAT SINK

X401 093G 2251B J CRYSTAL 12MHZ NXS12.000AC30F-KAB10 CN605 033G8032 3F S HR CONNECTOR

U401 056G 562392 SCALER NT68677UMFG/E QFP-128

U702 056G 563250 LDO LSP2159BD33AD TO-252 B-ty 1.5A/3.3V

U704 056G 563506 IC AME8815BECS180Z TO-252 AME

U601 056G 616110 AUDIO PAM8007NHR 3W SSOP-24

U110 056G 662 21 IC AOZ8804DI DFN-10

U103 056G 662 48 ESD PROTECT AZC399-04S.R7G SOT23-6L

U108 056G1133956 IC CAT24C02WI-GT3 SO-8

Q401 057G 417517 Tra LMBT3906LT1G -200 mA/-40V SOT-23 LRC

Q702 057G 417518 TRA LMBT3904LT1G 200mA/40V SOT-23 LRC

Q705 057G 763 79 FET AO4449 -7A/-30V SOIC-8

R750 061G0402000 JT RST CHIPR MAX0R05 1/16W TZAI YUAN

R139 061G0402100 JT RST CHIP 10R 1/16W 5% TZAI YUAN

R418 061G04021000FT RST CHIP 100R 1/16W 1%

R128 061G0402101 JT RST CHIP 100R 1/16W 5% TZAI YUAN

R129 061G0402102 JT RST CHIP 1K 1/16W 5% TZAI YUAN

R604 061G0402103 JT RST CHIP 10K 1/16W 5% TZAI YUAN

R620 061G0402104 JT RST CHIP 100K 1/16W 5% TZAI YUAN

R431 061G0402105 JT RST CHIP R 1Mohm 1/16W +/-5% TZAI YUAN

R120 061G0402222 JT RST CHIP 2K2 1/16W 5% TZAI YUAN

R752 061G0402223 JT RST CHIP 22K 1/16W 5% TZAI YUAN

R424 061G0402224 JT RST CHIP 220K 1/16W 5% TZAI YUAN

R611 061G0402333 JT RST CHIP 33K 1/16W 5% TZAI YUAN

R438 061G04023901FF RST CHIPR 3.9KOHM +-1% 1/16W FENGHUA

R112 061G0402470 JT RST CHIP 47R 1/16W 5% TZAI YUAN

R401 061G04024700FT RST CHIP 470R 1/16W 1%

R606 061G0402471 JT RST CHIP 470R 1/16W 5% TZAI YUAN

R461 061G0402472 JT RST CHIP 4K7 1/16W 5% TZAI YUAN

R704 061G0402473 JT RST CHIP 47K 1/16W 5% TZAI YUAN

R721 061G0402563 JT RST CHIPR 56KOHM 1/16W TZAI YUAN

R109 061G04027509FT RST CHIP 75R 1/16W 1%

R624 061G0402751 JT RST CHIP 750R 1/16W 5% TZAI YUAN

R459 061G0402752 JT RST CHIP 7K5 1/16W 5% TZAI YUAN

R117 061G0603000 JT RST CHIP MAX 0R05 1/10W TZAI YUAN

R429 061G0603109 JF RST CHIP 1R 1/10W 5% FENGHUA

R619 061G0603510 JT RST CHIP 51R 1/10W 5% TZAI YUAN

R420 061G0603560 JT RST CHIP 56R 1/10W 5% TZAI YUAN

R454 061G1206221 JT RST CHIPR 220 OHM +-5% 1/4W TZAI YUAN

C426 065G040210412K T CAP CHIP 0402 100nF 16V X7R

79

Meridian 3

C419 065G0402105A5K T CAP 0402 1UF 10% 10V X5R

C112 065G040222031J 3 CAP CHIP 0402 22P 50V NPO +/-5%

C616 065G040222131J T CAP CHIP 0402 220pF 50V NPO

C750 065G040222415K T CAP CHIP 0402 220nF K 16V X5R

C631 065G0402224A5K 3 CAP 0402 220N 10V X5R +/-10%

C609 065G040233131J T CAP CHIP 0402 330PF 50V J NPO

C423 065G040247031J Y CAP 0402 47PF 5% 50V NP0

C104 065G040247312K A CAP 0402 47NF 10% 16V X7R

C105 065G040250931C 3 CAP CHIP 0402 5PF 50V NP0 +/-0.25pF

C610 065G060322422K Y CAP 0603 220N 25V X7R 10%

C416 065G080510615K T CHIP 10uF 16V X5R 0805

C603 065G120622615K T CAP CHIP 1206 22UF K 16V X5R FB408 071G 56K121 CHIP BEAD FB106 071G 59G301 CHIP BEAD CHIP BEAD 300 OHM 0603 FB103 071G 59K190 B CHIP BEAD 0603 19 OHM FCB1608KF-190T05 CN501 088G 34019H VA HDMI HEADER 19P V/T H:13.0mm

D103 093G 60505 SCHOTTKY BAT54C 0.2A 30V SOT-23

D102 093G 64 42 PP BAV70 SOT-23

D403 093G 39GA01 T RLZ5.6B

D601 093G 64S522SEM LL4148 FQ004 KEPCAQP3 KEY BOARD ASSY CN001 033G8032 6F S HR CONNECTOR

U001 056G 669 10 TOUCH KEY CG7246AMT QFN-16(COL)

R001 061G0402561 JF RST CHIP 560R 1/16W 5% FENGHUA

R006 061G0603681 JT RST CHIPR 680OHM +-5% 1/10W TZAI YUAN

C001 065G040210232K 3 CAP CHIP 0402 1N 50V X7R +/-10%

C003 065G040210412K 3 CAP CHIP 0402 100N 16V X7R +/-10%

C002 065G060310605M 3 MLCC 0603 10uF 6.3V X5R +-20% TDK FQ014 HJPFAQP1 HEADPHONE JACK BOARD ASSY CN007 088G 30290C HF PHONE JACK R/A 5P BLACK H=4.5 HF CN006 033G8032 5F HR CONNECTOR FQ015 LEPCAQP1 LED BOARD ASSY CN002 033G8032 4F S B CONN 1.25mm 4P V/T 9.95mm 2.6mm

LED001 081G 15W 1 EL CHIP LED WHITE 99-113UNC/2223010/TR8

FQ003 PLPCAB521GQBY POWER BOARD ASSY

IC902 056G 139 3A PC123Y22FZOF SHARP

NR901 061G 58100MEW NTCR 10R 20% 4W

C905 063G107K224 UM X2 CAP 0.22uF K 275VAC

C920 065G306K6812BP Y1 680PF M 250VAC

C900 065G306M3322BP CAP Y1 3.3NF 20% 250V Y5U

C903 067G 40Z47015K EC 47UF 20% 450V 12.5*35

C907 067G215S3316KV EC 330uF M 35V 10*12mm

!

80

Meridian 3

L901 073G 174192 H LINE FILTER 30MH MIN LCL-12012 HA L902 073G 253 91 V CHOKE COIL 3.5uH+-10%

T901 080GL19P 17DN1 X'FMR 500UH 5% 10UH LZ.PJ004.R00 PQ38 CN901 087G 501 48 HC HF AC SOCKET V/T 3P DB-14-04H H=21.6 HF CN903 088G302J5G1VYG HF PHONE JACK V/T 5P GREEN H=15 HF BD901 093G 50460 51 BRIDGE D2SB80 2A 800V GBL CN904 095G 820 4X505 HARNESS 4P(SAN)-3P(A1253HA) 240mm CN902 095G 825 7D910 HARNESS 7P(SCN)-9P 60mm FQE102523I

Q901 057G 667940 MOSFET P1070ATF 10A 700V TO-220F D903 093G 60507 SCHOTTKY SRF1060 C0 10A 60V ITO-220AB D901 093G 60943 DIODE SFF1004G ITO-220AB C813 067G 4151017KV EC 100uF 50V ED 8*12

C804 067G415L330 9L EC 33UF 20% 100V 8*11.5 CN802 311GB254B04AAL PIN HEADER 2.54MM 4P 2P7.2MM/2P4.0MM CN801 311GB254B07AAL PIN HEADER 2.54MM 7P 5P7.2MM/2P4.0MM

IC801 056G 379185 AC/DC CONVERTER TA9690GN-A1-0-TR SOP-24

Q801 057G 763 92 FET P8008HV 4A/80V SOP-8

R835 061G0603000 JF RST CHIPR MAX 0R05 1/10W FENGHUA

R823 061G0603000 JY RST CHIPR MAX0R05 1/10W YAGEO

R814 061G0603100 JF RST CHIPR 10 OHM 5% 1/10W FENGHUA

R807 061G0603100 JT RST CHIP 10R 1/10W 5% TZAI YUAN

R812 061G0603101 JY RST CHIPR 100 OHM +-5% 1/10W YAGEO

R810 061G0603102 JI TEST ONLY RST 0603 1K 5% 1/10W TA-I

R806 061G0603103 JT RST CHIP 10K 1/10W 5% TZAI YUAN

R809 061G0603104 JT RST CHIP 100K 1/10W 5% TZAI YUAN

R805 061G06031803FF RST CHIPR 180K +-1% 1/10W FENGHUA

R804 061G06032702FI RST CHIP 27K 1/10W 1% TA-I

R824 061G06033302FI TEST ONLY RST 0603 33K 1% 1/10W TA-I

R822 061G0805105 JT RST CHIP 1M 1/8W 5% TZAI YUAN

R830 061G0805109 JF RST CHIPR 1 OHM +- 5% 1/8W FENGHUA

R831 061G0805109 JY RST CHIP 1R 1/8W 5% YAGEO

R825 061G1206000 JF RST CHIPR MAX0R05 1/4W FENGHUA

R832 061G12060007JY RST CHIPR MAX0R05 7A 1/4W YAGEO

R801 061G12061507FF RST 1206 0.15R 1% 1/4W

C814 065G060310131J M CAP CHIP 0603 100pF J 50V NPO

C805 065G060347412K 3 CAP CHIP 0603 0.47uF K 16V X7R

C801 065G080510432K F CAP CHIP 0805 0.1UF K 50V X7R

C806 065G080522522K Y CAP CHIP 0805 2U2 25V X7R +/-10%

L801 073G253S 98 S SMD CHOKE 47UH 20% 0.064R SLG-12575-470 ZD801 093G 60S907 T SCHOTTKY B3100B 3A 100V SMB CN804 311GF100C06ADH FFC CONN 1.0mm 6P

C807 065G080522512K M CAP 0805 2.2UF 10% 16V X7R

81

Meridian 3

R842 061G06031103FI RST 0603 110K 1% 1/10W

IC901 056G 379190 AC/DC CONVERTER LD7750RGR SOP-7

R939 061G0805000 JT RST 0805 0.05R MAX 1/8W R915 061G08051000FY RST CHIPR 100 OHM +-1% 1/8W YAGEO R923 061G08051002FY RST CHIP 10K 1/8W 1% R934 061G0805102 JF RST CHIPR 1K OHM +-5% 1/8W FENGHUA R940 061G0805102 JT RST CHIPR 1K OHM +- 5% 1/8W TZAI YUAN R931 061G0805104 JT RST CHIPR 100KOHM +- 5% 1/8W TZAI YUAN R921 061G08051501FT RST CHIPR 1K5 +-1% 1/8W TZAI YAUN R920 061G0805221 JI RST CHIPR 220 OHM +-5% 1/8W 0805 R926 061G08054701FT RST CHIP 4K7 1/8W 1% R933 061G0805511 JF RST CHIPR 510OHM +-5% 1/8W FENGHUA R927 061G08059101FT RST CHIP 9K1 1/8W 1% R924 061G1206100 JT RST CHIPR 10 OHM +-5% 1/4W TZAI YUAN R912 061G1206103 JT RST CHIPR 10KOHM +-5% 1/4W TZAI YUAN R918 061G1206155 JT RST CHIPR 1.5MOHM +-5% 1/4W TZAI YUAN R911 061G1206220 JF RST CHIPR 22 OHM +-5% 1/4W FENGHUA R914 061G1206470 JT RST CHIPR 47 OHM +-5% 1/4W TZAI YUAN R910 061G12064707FI RST 1206 0.47R 1% 1/4W R905 061G1206682 JT RST CHIPR 6.8 KOHM +-5% 1/4W TZAI YUAN C922 065G080510232K Y CAP CHIP 0805 1N 50V X7R +/-10% C932 065G080510332K Y CAP CHIP 0805 10N 50V X7R +/-10% C912 065G080510432K Y CAP CHIP 0805 100N 50V X7R +/-10% C919 065G080533332K Y CAP CHIP 0805 33N 50V X7R +/-10% C901 065G120622272K Y CER 1206 2N2 500V X7R 10%

FB903 071G 56K121 M CHIP BEAD 120OHM 6A MGLB2012-120T-LF

R932 061G152M68152T SY RST MOF 680R 5% 2WS C931 065G 1K471 2T 470pF 1KV Z5P +-10% C906 065G 2K152 2T6921 CAP CER 1500pF K 2KV Y5P

FB901 071G 55 9 T BEAD 3.5*0.8*6.0mm 110R HF

F901 084G 56 4 B FUSE 4A 250V ZD902 093G 39A6852T ZENER DIODES MTZJ22B DO-34

D904 093G 6452452T SWITCHING 1N4148-B4006 0.2A 100V DO-35 R919 061G152M47852T SY RST MOFR 0.47 OHM +-5% 2WS FUTABA Q903 057G 419 18 T SMALLTRAN 2SD1207-T-AE 2A 60V MP

IC903 056G 563354 Shunt. Reg. TL431-A-TA TO-92

D902 093G 60964 RECTIFIER PS1010R T/B 1A 1000V DO-41 R903 061G152M10452T SY RST MOFR 100KOHM +-5% 2WS FUTABA C911 067G215C4713KT EC 470 20% 16 8*9 C916 067G215C4706KT EC 47UF 20% 35V 8*9 C910 067G 2046812KT CS CAP 680uF 10V 8*11 mm C910 067G 2046812KT CS CAP 680uF 10V 8*11 mm

!

82

Meridian 3

Recommended Parts List for 227E3LPHSU/00

Item Location PCM Codes Description Remark

1 FQ106 A34G2574AMCA2M0130 BEZEL L215WA-Uph1b 2 FQ004 KEPCAQP3 KEY BOARD ASSY 3 FQ007 IRPCAQA7 IR BOARD ASSY 4 FQ015 LEPCAQP1 LED BOARD ASSY 5 FQ007 IRPCAQT1 IR BOARD ASSY 6 E750 750GBM215GE012M0PH LCD M215HGE-L10 C1(CC) NB CMI 6 E750 750GBM215GE012N000 LCD M215HGE-L10 C1(CC) NB CMI 6 E750 750GBG215W4E73M0PH LCD LM215WF4-TLE7 GZ LGD 6 E750 750GBG215W4E73N000 LCD LM215WF4-TLE7 GZ LGD 7 FQ003 PLPCAB521MQBL POWER BOARD ASSY CMI 7 FQ003 PLPCAB521GQBM POWER BOARD ASSY LGD 8 FQ002 756GQACB PL005 00 SCALER BOARD ASSY(CBPCANUP1Q2) CMI 8 FQ002 756GQACB PL006 00 SCALER BOARD ASSY(CBPCANUP1Q2) LGD

9 FQ014 HJPFAQP1 HEADPHONE BOARD ASSY 10 FQ124 A15G1621M01201 MAIN_FRAME L215WA-Uph1-s1 CMI 10 FQ124 A15G1621G01201 MAIN_FRAME L215WA-Uph1-s1 LGD 11 FQ105 A34G2575AFLA2B0130 REAR COVER CMI 11 FQ105 A34G2575AFLA6B0130 REAR COVER L215WA-Uph1b LGD 12 FQ110 A37G0251011 HINGE 21.5 13 FQ126 A34G2576AFL 1B0100 STAND 14 FQ109 A34G2577AFL 1B0120 BASE L215WA-s1

E08902 089G 725HAA 2G D-SUB CABLE 1500MM FQ304 089G179J30N576 FFC CABLE 30P 195mm P1.0MM E08901 089G404A15N IS AC POWER CORD 1500 E09501 095G176X 6H20 FFC CABLE 6PIN 154MM P1.0MM FQ310 095G8014 5D 66 HARNESS 5P-5P 200mm FQE102634I FQ310 095G8014 5D 67 HARNESS 5P-5P 200mm FQE102631I FQ310 095G8014 7D 29 HARNESS 7P-4P+6P 180+520mm FQE102630I FQ118 A33G1200AFL 1L0100 COVER HINGE FQ411 A33G1201 2 1C0100 LENS LED FQ411 A33G1202AKZ 1C0100 LENS POWER SENSOR U402 100GPNMI007NT1 MCU ASSY(056G2233 11) CMI U402 100GPNGI00DNT1 MCU ASSY(056G2233 11) LGD X401 093G 2251B J CRYSTAL 12MHZ NXS12.000AC30F-KAB10 U401 056G 562392 SCALER NT68677UMFG/E QFP-128 U704 056G 563218 IC LDO AP2114D-1.8TRG1 1A/1.8V TO-252 U702 056G 563512 IC G1117-33T43UF 1A/3.3V TO-252 U601 056G 616110 AUDIO PAM8007NHR 3W SSOP-24 U110 056G 662 21 IC AOZ8804DI DFN-10 U112 056G 662 21 IC AOZ8804DI DFN-10

83

Meridian 3

U101 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U103 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U104 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U106 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U107 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U109 056G 662504 IC ESD AOZ8902CIL 24KV 5A SOT23-6 AOS U402 056G2233 11 IC Pm25LD020C-SCE SIOC-8(150mil) 2M U001 056G 669 10 TOUCH KEY CG7246AMT QFN-16(COL) U053 056G 627911 IR 38KHZ KSM-603TM2M U052 056G 192 25 D-AMP AS358MTR-E1 SOIC-8 U051 056G1125200 IC MCU PIC12F615-I/SN SOIC-8 T901 080GL19P 17DN1 X'FMR 500UH 5% 10UH LZ.PJ004.R00 PQ38 IC801 056G 379185 AC/DC CONVERTER TA9690GN-A1-0-TR SOP-24 IC902 056G 139 3A PC123Y22FZOF SHARP CMI IC902 056G 139 9 IC EL817M(X) photocoupler DIP-4 LGD IC901 056G 379190 AC/DC CONVERTER LD7750RGR SOP-7 F902 084G 56 4 B FUSE 4A 250V F901 084G 56 4 B FUSE 4A 250V

Service Kit

Description Part No. Picture

ISP JIG 715GT089-B/C

EDID JIG 715GT034-B

!

84

Meridian 3

17. Different Parts List

Diversity of 227E3LHSU/01 compared with 227E3LHSU/00

227E3LHSU/01 227E3LHSU/00

Location PCM Codes Description Location PCM Codes Description

Diversity of 227E3LHSU/69 compared with 227E3LHSU/00

227E3LHSU/69 227E3LHSU/00

Location PCM Codes Description Location PCM Codes Description

E08901 089G418A15NISJ AC POWER CORD 1500 E08901 089G404A15N IS AC POWER CORD 1500

Diversity of 227E3LHSU/93 compared with 227E3LHSU/00

227E3LHSU/93 227E3LHSU/00

Location PCM Codes Description Location PCM Codes Description

E08901 089G414A15N IS POWER CORD 1500MM China Reg. E08901 089G404A15N IS AC POWER CORD 1500

FQ202 Q44GB068813 2A CARTON FQ202 Q44GB071813 2B CARTON

Diversity of 227E3LHSU/96 compared with 227E3LHSU/00

227E3LHSU/96 227E3LHSU/00

Location PCM Codes Description Location PCM Codes Description

FQ301 089G420A15N IS AC POWER CORD 1500MM TAIWAN E08901 089G404A15N IS AC POWER CORD 1500

85

Meridian 3

Diversity of 227E3LPHSU/27 compared with 227E3LPHSU/00

227E3LPHSU/27 227E3LPHSU/00

Location PCM Codes Description Location PCM Codes Description

E08901 089G402A15N IS AC POWER CORD 1500MM E08901 089G404A15N IS AC POWER CORD 1500

Diversity of 227E3LPHSU/69 compared with 227E3LPHSU/00

227E3LPHSU/69 227E3LPHSU/00

Location PCM Codes Description Location PCM Codes Description

FQ301 089G418A15NISJ AC POWER CORD 1500 E08901 089G404A15N IS AC POWER CORD 1500

Diversity of 227E3LPHSU/75 compared with 227E3LPHSU/00

227E3LPHSU/75 227E3LPHSU/00

Location PCM Codes Description Location PCM Codes Description

Diversity of 227E3LPHSU/93 compared with 227E3LPHSU/00

227E3LPHSU/93 227E3LPHSU/00

Location PCM Codes Description Location PCM Codes Description

Diversity of 227E3LPHSU/94 compared with 227E3LPHSU/00

227E3LPHSU/94 227E3LPHSU/00

Location PCM Codes Description Location PCM Codes Description

FQ301 089G417A15N IS POWER CORD E08901 089G404A15N IS AC POWER CORD 1500

!

86

Meridian 3

Diversity of 227E3LPHSU/96 compared with 227E3LPHSU/00

227E3LPHSU/96 227E3LPHSU/00

Location PCM Codes Description Location PCM Codes Description

FQ301 089G420A15N IS AC POWER CORD 1500MM TAIWAN E08901 089G404A15N IS AC POWER CORD 1500

Diversity of 227E3LPHSB/00 compared with 227E3LPHSU/00

227E3LPHSB/00 227E3LPHSU/00

Location PCM Codes Description Location PCM Codes Description

Meridian 3

87

18. General Product Specification

Quick Specification table:

Model Input Feature

227E3 LH 1A1D1H

227E3 LPH 1A1D1H PowerSensor

Contents

1. Foreword

2. Product Profile

2.1 EDID Header

2.2 LCD

2.3 Scanning Frequencies

2.4 Ambient Temperature

2.5 Power Range

3. Electrical Characteristics

3.1 Interface Signals

3.2 Interface

3.3 Timing Requirement

3.4 OSD/Keypad functions

3.5 Horizontal Scanning

3.6 Vertical Scanning

3.7 Power Input Connection

3.8 Power Management

3.9 VGA Display Identification

3.10 DVI Display Identification

3.11 DDC /CI Support and Smart Manage/Control

3.12 Hot-key Definition

3.13 Smart Image

3.14 PerfectTune II (formerly FGA, Factory Alignment)

3.15 Audio

3.16 Power Sensor (Option)

4. Visual Characteristics

4.1 Test Conditions

4.2 Brightness

4.3 Color Temperature Adjustment

5. Mechanical Characteristics

5.1 Cosmetic

5.2 Mechanical Data Files

5.3 Location of Philips Logo

5.4 Gap between Panel and Front Bezel

5.5 Location of Control Icons

5.6 Color for Resin/Paint

!

88

Meridian 3

5.7 Fire Enclosure Request

5.8 Resins

5.9 If Paint is used

5.10 Plastic Mold T ooling

5.11 Plastics Flammability

5.12 Texture/Glossing of House

5.13 Tilt and Swivel Base

5.14 Kensington Lock

5.15 Product Dimension /Weight (Refer to Philips Approved SHT191/SHT560)

5.16 Transport ation

5.17 Pallet / Container Loading (refer to Philip s approved SHT560)

6. Environmental Characteristics

6.1 Susceptibility of Display to External Environment

6.2 Transportation Tests

6.3 Display Disturbances from External Environment

6.4 Display Disturbances to External Environment

1. Foreword

This specification describes a 21.5Ǝ FHD multi-scan color TFT LCD monitor with maximum resolution up to 19 20 x 1080 /75Hz non-interlaced. This model uses 250 nits panel. All optical characteristics are determined according to panel specification after warming up longer than 30 minutes.

2. Product Profile

This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt base.

2.1 EDID Header Data for EDID & .inf file

1 User visible strings on .inf file Philips 227ELH (22inch wide LCD monitor 227E3LH) 2 Manufacturer ID ( EDID data) PHL 3 Product ID, "xxxx" 4 codes MSB(byte 12): C0

LSB (byte 11): 7B 4 maximum resolution 1920 x 1080 5 Horizontal Frequency Range 30~83 KHz 6 Vertical Frequency Range 56~76Hz 7 Monitor Name (13 characters max.) 227ELH

1 User visible strings on .inf file Philips 227ELPH (27inch wide LCD monitor 227E3LPH) 2 Manufacturer ID ( EDID data) PHL 3 Product ID, "xxxx" 4 codes MSB(byte 12): C0

LSB (byte 11): 7A 4 maximum resolution 1920 x 1080 5 Horizontal Frequency Range 30~83 KHz

Meridian 3

89

6 Vertical Frequency Range 56~76Hz 7 Monitor Name (13 characters max.) 227ELPH

2.2 LCD Suppliers to offer panel specifications, Panel incoming specification: Follow Philips’ specification CMI

Type NR. : CMI M215HGE-L10 Resolution : 1920 x 1080 (WSXGA+) Outside dimensions : 495.6 (H) x 292.2 (V) x 11.5 (D) mm (typical) Pitch (mm) : 0.248 mm x 0.248 mm Color pixel arrangement : RGB vertical stripe Display surface : Hard coating (3H) Color depth : 16.7M colors (6 bit Hi-FRC) Backlight : LED Active area (W x H) : 479.64 (H) × 268.11 (V) mm View angle (CR=10) : 170 for Right/Left (typ.), 160 for Up/Down (typ.) Contrast ratio : 1000:1 (typ.) White luminance : 250 cd/m2 (typ.) Color gamut : 70% (typ.) Gate IC : N/A Source IC : N/A Response time : Tr + Tf <=5 ms (typ.) Vertical Frequency Range : 56 ~ 76Hz

LGD

Type NR. : LGD LM215WF4-TLE7 Resolution : 1920 x 1080 (WSXGA+) Outside dimensions : 495.6(H) x 292.2(V) x 10.2(D) mm (typical) Pitch (mm) : 0.248mm x 0.248mm Color pixel arrangement : RGB vertical stripe Display surface : Hard coating (3H), Anti-glare treatment of the front polari zer Color depth : 16.7M colors Backlight : LED Active area (W x H) : 476.64(H) x 268.11(V) mm View angle (CR>=10) : R/L 170(Typ.), U/D 160(typ.) Contrast ratio : 1000:1 (typ.) White luminance : 250 cd/m

2

(typ. Center 1 point) Color gamut : 70% (Typ.) Gate IC : N/A Source IC : N/A Response time : <=5 ms (typ.) Vertical frequency range : 50~75Hz

!

90

Meridian 3

2.3 Scanning Frequencies

Hor. : 30 - 83 K Hz

Ver. : 56 - 76 Hz Video dot rate : < 210 MHz for VGA and < 170 MHz for DVI

, warning message must be displayed while

over 165MHz, (supplier to provide accurate scaler bandwidth number) Power input : 90-264 V AC, 50/60 r 2 Hz Functions:

1. D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync

2. SOG sync: a. Sync select: H+V b. Sync select: SERR c. XS SYNC SELECT: H EOR V

3. DVI digital Panel Link TMDS inputs, HDCP supported.

2.4 Ambient temperature: 0 qC - 40 qC

2.5 Power Range: Full Range Power Supply 90 – 264 VAC

3. Electrical Characteristics

Scaler should be capable of below items.

1) Scaler must support color engine for Image enhancement feature (SmartImage)

2) Scaler must have enough memory to support PerfecTune feature and Philips OSD

3) Scaler must support SmartContras, 500K: 1 DCR preferred

4) VGA signal Auto adjustment: Monitor automatically adjusts and optimizes resolution and frequency ba sed on input signal defined by

“Source” function. The message “NO VIDEO INPUT” (source)” (Note A) will be displayed on screen while no signal is detected. Monitor will automatically optimize resolution and frequency whenever connected to different signal source. When press the “Auto”, the screen also show a st atus bar. During adjustment period, a status bar will show on screen from 0% to 100% to indicate the progress of adjustment.

Auto adjustment: new timing & preset modes (non- factory preset mode) should do adjustment at first time

detection and save the related date into memory. Resolution



800x600, do not do auto adjustment.

Note A: source maybe D-SUB, DVI, HDMI.

3.1 Interface signals

a) D-Sub Analog

Input signal : Video, Hsync, Vsync Video : 0.7 Vp-p, input impedance, 75 ohm @DC

Sync. : Separate sync TTL level, input impedance 2.2k ohm terminate Hsync: Positive/Negative Vsync: Positive/Negative

Composite sync TTL level, input impedance 2.2k ohm terminate (Positive/Negative) Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)

b) DVI-D Digital

Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)

Meridian 3

91

c) HDMI (option , refer to Quick specification t able)

Follow HDMI 1.4

specification

TMDS Channel

¾ Carrie s audio, video and auxiliary data ¾ Signaling method: according to DVI 1.0 specification. Single-link (Type A HDMI) ¾ Video pixel rate: 25MHz to 165MHz (type A) ¾ Pixel encodings: RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4 ¾ Audio sa mple rates: 32KHz, 44.1KHz, 48KHz ¾ Audio ch annels: 2

DDC Channel

¾ Allows source to interrogate capabilities of sink ¾ I2C signaling with 100 KHz clock ¾ E-EDID data structure according to EIA/CEA-861D and VESA Enhanced EDID.

Content protection:

According to High-Definition Content Protection (HDCP) Specification 1.10 HDMI video input should supporting timing defined in CEA861-D Specification with extended EDID blocks.

Video Timing Support:

Format Resolution Type Vertical frequency

480i 720 x 480 SD 60Hz

480p 720 x 480 SD 60Hz

576i 720 x 576 SD 50Hz 576p 720 x 576 SD 50Hz 720p 1280 x 720 HD 50Hz , 60Hz

1080i 1920 x 1080 HD 50Hz , 60Hz

1080p 1920 x 1080 HD 24Hz, 25Hz, 30Hz, 50Hz, 60Hz

Picture Centering: H&V<=0.5% (for TV, 480i/p, 576i/p, 720p, 1080i/p)

OverScan:

1. RGB signal: OFF (no this function)

2. YUV signal: (Video timming) ON (Be used and set ON/OFF, but only 1080p definde is OFF)

PC timing: to follow PC timing table

TMDS/+5V/DDC/HPD/CEC Signals

!

92

Meridian 3

(TMDS Signal) Termination Supply Voltage AVcc: 3.3V±5% Differential Voltage Level: 150mV – 1200mV Common Mode Voltage: (AVcc – 300mV) – (AVcc – 37.5mV) Differential Sensitivity: 150mVp-p Maximum differential Voltage: 1560mVp-p

(+5V Power) Power Supply Voltage: 4.7V – 5.3V Maximum Current Consumption: 50mA

(DDC Signal) Maximum Capacitance: 50pF

(HPD Signal) High Voltage Level: 2.4V – 5.0V Low Voltage Level: 0 – 0.4V Output Resistance: 1Kȍ±20%

(CEC Signal, not supported by this model) Input Low Voltage: < 0.8V Input High Voltage: > 2.0V Output Low Voltage: 0 – 0.4V Output High Voltage: 2.5V – 3.6V Pull-up Resistor: 2.7Kȍ±10% Leakage Current in standby/off : < 1.8uA Maximum Capacitance: 100pF

d) Display Port (option, refer to Quick specification table)

Follow Display Port 1.1

specification

e) USB Hub 2.0 (option, refer to Quick specification table)

USB port (1 upstream, 2 or 4 downstream)

f) Audio in (option, refer to Quick specification table)

Input signal: 1Vrms Loudspeaker: stereo of RMS Power Frequency range: (WAIT FOR SUPPLIER INPUT) Headphone connection will mute speaker

g) USB PLUG (option, refer to Quick specification table)

USB port (1 upstream, 1 downstream), black jack color)

h) HDMI audio out (headphone): (option, refer to Quick specification table)

Stereo, > 50mVrms for headphone of 32:

Meridian 3

93

3.2 Interface

3.2.1 D-Sub Cable

Length : Please refer to M3 cable bundle summary file

Fix with monitor when packing, with transplant pin protective cover. Connector type : D-Sub male with DDC2B pin assignments. Blue connector thumb-operated jack screws Pin assignments:

Pin Signal Assignment Pin Signal Assignment

1 Red 9 DDC +3.3V or +5V 2 Green / SOG 10 Logic GND 3 Blue 11 Sense (GND) 4 Sense (GND) 12 Bi-directional data 5 Cable Detected (GND) 13 H /H+V sync 6 Red GND 14 V-sync 7 Green GND 15 Data clock 8 Blue GND

3.2.2 DVI Cable

The input signals are applied to the display through DVI-D cable. Length : Please refer to M3 cable bundle summary file Connector type : DVI-D male with DDC-2B pin assignments

White connector thumb-operated jackscrews With transplant pin protective cover.

Pin Assignment:

Pin Signal Assignment Pin Signal Assignment

1 T.M.D.S. data2- 13 No Connect 2 T.M.D.S. data2+ 14 +5V Power 3 T.M.D.S. data2 shield 15 Ground (for +5V) 4 No Connect 16 Hot plug detect 5 No Connect 17 T.M.D.S. data06 DDC clock 18 T.M.D.S. data0+ 7 DDC data 19 T.M.D.S. data0 shield 8 No Connect 20 No Connect

9 T.M.D.S. data1- 21 No Connect 10 T.M.D.S. data1+ 22 T.M.D.S clock shield 11 T.M.D.S. data1 shield 23 T.M.D.S. clock+ 12 No Connect 24 T.M.D.S. clock-

3.2.3 HDMI Cable

The input signals are applied to the display through HDMI cable. Length : Please refer to M3 cable bundle summary file Connector type : HDMI male with DDC-2B pin assignments

White connector thumb-operated jackscrews With transplant pin protective cover.

!

94

Meridian 3

Pin Assignment:

Pin Signal Assignment Pin Signal Assignment

1 TMDS data2+ 11 TMDS data c shield

2 TMDS data2 shield 12 TMDS data ck-

3 TMDS data2- 13 CEC

4 TMDS data1+ 14

Reserved (HDMI 1.0-1.3c), HEC Data- (Optional, HDMI 1.4+ with Ethernet)

5 TMDS data1 shield 15

SCL (I²C Serial Clock for DDC)

6 TMDS data1- 16

SDA (I²C Serial Data Line for DDC)

7 TMDS data0+ 17

DDC/CEC/HEC Ground

8 TMDS data0 shield 18

+5 V Power (max 50 mA)

9 TMDS data0- 19

Hot Plug Detect (All versions) and HEC Data+ (Optional, HDMI 1.4+ with Ethernet)

10 TMDS data ck+

3.3 Timing Requirement Factory Preset Mode Definition:

a. Perfect FOS while presenting those timings. b. Will specify those timing in User's Manual

Preset Mode Definition

a. Need to support those timings b. Perfect FOS after auto adjustment.

User Mode

a. Can save those timing that not in Preset mode and can be showed (not over scaler or Panel spec.) b. It needs to reserve the 10 timings space in memory size.

3.3.1 Mode Storing Capacity

Factory preset modes : 15 Preset modes : 41

User modes : 10

Timing pixel clock over H/W limitation do not support. VGA Video timing: interlace modes do not support.

1. Factory preset modes and preset modes are defined in the enclosed timing table file

ŎĴġŕŪŮŪůŨġ

ŵŢţŭŦŠĳıĲĲıĵıĹįŹŭŴŹ

Video timing mode (internal firmware support) 60Hz: 480p/720p/1080i/1080p 50Hz: 576p/720p/1080i/1080p

Meridian 3

95

3.4 OSD/Keypad functions:

Item

1

OSD/keypad definition

ŎĴġŎŊńŐŏġ

ŔőņńŠĳıĲĲıĵıķįťŰŤ

Reset - No: Exit Yes: Auto adjustment for displaying timing mode and recall factory preset

2 OSD Translation

ŐŔŅŠŔŵųŪůŨŠŎĴŠĳıĲ

ĲıĴĳĳįŹŭŴ

English, French, German, Spani sh, Italian, Russian, Simplified Chinese, Portuguese, Turkish (9)

4 Power ON Logo

őũŪŭŪűŴŠōŰŨŰŠĲĺĳıŹ

ĲıĹıįţŮű

Power On Logo: Power On Æ Show up Philips logo 3 seconds Æ Change to input signal. This picture is reference only. The official drawing will send out by PM.

5 Audio Selection

Stand-alone- On: Isolate video and audio control input Stand-alone – Off: Integrate video and audio control input Mute- On: Turn off audio Mute- Off: Turn on audio

3.5 Horizontal scanning

Sync polarity : Positive or Negative Scanning frequency : 30 - 83 KHz

PS: Item 3.4 and 3.5, as far as possible to be display (another Horizontal and Vertical)

3.6 Vertical scanning

Sync polarity : Positive or Negative Scanning frequency : 56 - 76 Hz

3.7 Power input connection

Power cord length : please refer to M3 cable bundle summary file Power cord type : 3 leads power cord with protective earth plug.

3.8 Power management

The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.

Mode HSYNC VSYNC Video Pwr-cons. Indication Rec. time

Power-On On On Active

<30W (typ.)

< 35W (max.)

White LED --

Standby

(Sleep mode)

Off Off Blanked < 0.5W

Blinking white LED

Period 3ec on, 3sec off

Note 1 Note 2

DC Power Off N/A

< 0.3W LED Off

!

96

Meridian 3

PS: SmartImage Economy mode: < EPA5.0 spec. (Brightness=20%) EPA 5.0 spec. as below

Panel size Native resolution Max. Power (W)

16"(16:9) 1366x768 14.5

17"(4:3) 1280x1024 21.9

17"(16:10) 1440x900 21.2

18.5"(16:9) 1366x768 16.6 19"(16:10) 1440x900 22.7

19"(4:3) 1280x1024 23.6

20"(16:10) 1680x1050 28

20"(16:9) 1600x900 24.5

22"(16:10) 1680x1050 30

22"(16:9) 1920x1080 31.6 23"(16:9) 1920x1080 32.9

24"(16:10) 1920x1200 36.8

24"(16:9) 1920x1080 34

Note 1:

a. D-SUB, HDMI mode,

Normal node to Power saving mode: 19/s (typ.) Power saving mode to Normal: 4/s (typ.) Source / timing change: 10/s (typ.)

b. DVI mode,

Normal node to Power saving mode: 19/s (typ.) Power saving mode to Normal: 10s (typ.) Source / timing change: 10/s (typ.)

Note 2: Measurement power saving.

ŮŦŢŴŶųŦŮŦůŵġŰŧġ

űŰŸŦųġŴŢŷŪůŨįűťŧ

őŰŸŦųġŤŰůŴŶŮűŵŪŰůġ

ŮŦŢŴŶųŦġŵũŦġŸŢźġĮıĺı

3.9 VGA Display Identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability

3.10 DVI Display Identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and EDID V1.3

3.11 DDC /CI Support and Smart Manage /Control

In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with, Philips SmartManage, SmartControl V6.1, and Portrait Display Tune at least

3.12 Hot-key definition

ŅĻŝņŏňŝŮŰůŪŵŰųġ

űųŰūŦŤŵŴŝŴűŦŤŝŉĹŝũŰŵġ

Ŭ

Meridian 3

97

3.13 Smart Image

ŔŮŢųŵŊŮŢŨŦġőųŰŧŪŭŦġ

ŅŦŧŪůŪŵŪŰůŴĩŎĳĪįťŰŤ

3.14 PerfectT une II (formerly FGA, FACTORY GAMMA Alignment) A. PerfectTune must be done after warming 30 minutes at least. B. PerfectTune must be performed after Auto Color. C. PerfectTune must be conducted through DVI or scaler embedded patterns. D. Delta E < 2.5

3.15 Audio

3.15.1 Frequency Response

The amplifier and speaker combination shall provide a frequency response of 300Hz to 20 KHz, with +/-3db variation over the entire response range.

3.15.2 Total Harmonic Distortion

Total harmonic distortion shall be limited to 5% THD at the maximum watt age speake r rating specified in section 1.3 at 1 KHz, when the input is 1.0Vrms.

3.15.3 Power Handling

Each speaker transducer shall accept up to the specified wattage of audio power without damage or exceeding the frequency response and total harmonic distortion specifications.

3.15.4 Audio Amplifier

The amplifier shall provide two channels of audio up to 1.5 Watts per channel from 100Hz to 20 KHz, based upon an audio signal input of 1.0Vrms p er channel.

3.15.5 Volume Control

For monitors with a manual volume control, the direction (at the bottom) of the bezel volume control is “-” key for minimum volume and “+” key for maximum volume. The default shipping po sition of the volume control shall be approximately 90%.

3.15.6 Speaker Sensitivity

The speakers shall support a minimum sensitivity of 75dB+/-3dB at 2W/1m at 1 KHz.

3.15.7 Maximum Audio Card Output

The monitor audio amplifier shall accept a maximum input voltage of 1.5Vrms and meet the following requirements at the maximum monitor volume setting.

1. The ratings of the audio amplifier may not be exceeded.

2. The ratings of the speakers may not be exceeded.

3. There must not be any clipping of the audio amplifier output signal. Voltage dividers may be used to reduce the input signal level.

3.15.8 Monitor Audio Amplifier Input Impedance

The monitor audio amplifier shall have minimum 10KOHM AC input impedance.

!

98

Meridian 3

3.16 Power Sensor (option)

Functional requirements for the front detection For the presence sensor functionality, the following requirements are defined. y Two IRs used for user present detectio ns, one IR is for transmission signals, the other one is for receiving

reflection IR signals.

y User must be detected in the following range:

40 up to 100 cm (+ 20cm)

y Detection angle:

+/-35 degree (for IR LED)

y Sensor key control

Adjust detection distances (0~4 scales), default is 3 tolerances: (+/-10 cm) 0: OFF 1: 90 cm 2: 100 cm 3: 110 cm 4: >130 cm

y Sensor distance measure:

1. Cotton material color: black

2. Monitor center straight distance (90 deg)

3. Body with: about 40 cm

4. Body horizontal move: Monitor center +/- 5cm

y Anti-interference between two monitors

Monitors must have anti-interference methods (coding .ect) to prevent monitors to talk to each other.

Power sensor functional behavior

Time Period 60sec 60sec ~ 180sec 180sec ~

Power Sensor No ACTION

Lower down backlight brightness

Backlight & LCD panel shutdown

Power Saving 0 50% 80%

Meridian 3

99

The following set-up will be supported:

Monitors standing back to back

The monitors may influence each other. So Monitor 1 may produce unexpected brightness-switches in monitor 2 (and vice versa). Furthermore, user 1 could perhaps (via monitor 1) influence the power sen sor readout on monitor 2.

Set up of multiple monitors under an angle

4. Visual Characteristics

4.1 Test conditions

Unless otherwise specified, this specification is defined under the following conditions.

1) Input signal: As defined in 3.3, 1920 x 1080 non-interlaced mode (1920 x 1080 @60Hz), signal sources must have 75 ohm output impedance.

2) Luminance setting: controls to be set to 250 nits with full screen 100 % duty cycle white signal

3) Warm up: more than 30 minutes after power on with signal supplied.

4) Ambient light: 400 -- 600 lux.

5) Ambient temperature: 20 ± 5 qC

4.2 Brightness

Follow Panel specification.

4.3 Color Temperature Adjustment

There are three factory preset white color 9300K, 6500K, sRGB. Apply full gray 64 pattern, with brightness in 100 % position and the contrast control at 50 % position. The 1931 CIE Chromaticity (color triangle) diagram (x, y) coordinat e for the screen center should be:

!

100

Meridian 3

Product Specification

CIE coordinates (x, y)

1 1500K x = 0.270 ± 0.02, y = 0.281 ± 0.02 PerfecTune II

9300K x = 0.283 ± 0.02, y = 0.297 ± 0.02 PerfecTune II 8200K x = 0.291 ± 0.02, y = 0.306 ± 0.02 PerfecTune II 7500K x = 0.298 ± 0.02, y = 0.314 ± 0.02 PerfecTune II

6500K/sRGB x = 0.313 ± 0.02, y = 0.329 ± 0.02 PerfecTune II

sRGB x = 0.313 ± 0.02, y = 0.329 ± 0.02 PerfecTune II

5000K x = 0.345 ± 0.02, y = 0.357 ± 0.02 PerfecTune II

Production Alignment Specification

CIE coordinates (x, y)

1 1500K x = 0.270 ± 0.06 y = 0.281 ± 0.06 PerfecTune II

9300K x = 0.283 ± 0.06 y = 0.297 ± 0.06 PerfecTune II 8200K x = 0.291 ± 0.06 y = 0.306 ± 0.06 PerfecTune II 7500K x = 0.298 ± 0.06 y = 0.314 ± 0.06 PerfecTune II

6500K/sRGB x = 0.313 ± 0.06 y = 0.329 ± 0.06 PerfecTune II

sRGB x = 0.313 ± 0.06 y = 0.329 ± 0.06 PerfecTune II

5000K x = 0.345 ± 0.06 y = 0.357 ± 0.06 PerfecTune II

Quality Inspection specification:

CIE coordinates (x, y)

9300K x = 0.283 ± 0.015 y = 0.297 ± 0.015 PerfecTune II

6500K/sRGB x = 0.313 ± 0.015 y = 0.329 ± 0.015 PerfecTune II

sRGB x = 0.313 ± 0.015 y = 0.329 ± 0.015 PerfecTune II

5. Mechanical Characteristics

5.1 Cosmetic -

Philips ID

5.2 Mechanical data files -

ProE files required

5.3 Location of Philips logo -

Per Philips make-up sheet

5.4 Gap between panel and front bezel

< 1.2 mm

5.5 Location of Control icons -

Per Philips Graphic sheet

Philips 227E3LHSU/93, 227E3LPHSU/27, 227E3LHSU/00, 227E3LHSU/69, 227E3LPHSU/00 Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual