Philips 221S3UCB-00 User Manual
221S3U
www.philips.com/welcome
EN User manual 1
Customer care and warranty 22
Troubleshooting & FAQs 27
Table of Contents
1. Important ................................................ 1
1.1 Safety precautions and maintenance ...1
1.2 Notational Descriptions .............................2
1.3 Disposal of product and packing
material ................................................................3
2. Setting up the monitor ......................... 4
2.1 Installation ...........................................................4
2.2 Remove Base Stand and Base .................7
3. USB monitor operation ....................... 9
3.1 Introduction .......................................................9
3.2 DisplayLink Graphics Software
Installation ...........................................................9
3.3 How to control the display ...................10
4. Technical Specifications ......................15
4.1 Resolution & Preset Modes...................16
5. Regulatory Information ......................17
6. Customer care and warranty ...........22
6.1 Philips’ Flat Panel Monitors Pixel
Defect Policy ..................................................22
6.2 Customer Care & Warranty .................24
7. Troubleshooting & FAQs ...................27
7.1 Troubleshooting ...........................................27
7.2 General FAQs ...............................................28
7.3 USB monitor FAQs ....................................29
1. Important
1. Important
This electronic user’s guide is intended for
anyone who uses the Philips monitor. Take time
to read this user manual before you use your
monitor. It contains important information and
notes regarding operating your monitor.
The Philips guarantee applies provided the
product is handled properly for its intended use,
in accordance with its operating instructions and
upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer’s
name and model and production number of the
product.
1.1 Safety precautions and maintenance
Warnings
Use of controls, adjustments or procedures
other than those specified in this documentation
may result in exposure to shock, electrical
hazards and/or mechanical hazards.
Read and follow these instructions when
connecting and using your computer monitor.
Operation
• Please keep the monitor out of direct
sunlight, very strong bright lights and
away from any other heat source. Lengthy
exposure to this type of environment may
result in discoloration and damage to the
monitor.
• Remove any object that could fall into
ventilation holes or prevent proper cooling
of the monitor’s electronics.
• Do not block the ventilation holes on the
cabinet.
• When positioning the monitor, make sure
the power plug and outlet are easily accessible.
• If turning off the monitor by detaching the
power cable or DC power cord, wait for 6
seconds before attaching the power cable
or DC power cord for normal operation.
• Please use approved power cord provided
by Philips all the time. If your power cord
is missing, please contact with your local
service center. (Please refer to Customer
Care Consumer Information Center)
• Do not subject the monitor to severe
vibration or high impact conditions during
operation.
• Do not knock or drop the monitor during
operation or transportation.
Maintenance
• To protect your monitor from possible
damage, do not put excessive pressure on
the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the
monitor by placing your hand or fingers on
the LCD panel.
• Unplug the monitor if you are not going to
use it for an extensive period of time.
• Unplug the monitor if you need to clean it
with a slightly damp cloth. The screen may
be wiped with a dry cloth when the power
is off. However, never use organic solvent,
such as, alcohol, or ammonia-based liquids
to clean your monitor.
• To avoid the risk of shock or permanent
damage to the set, do not expose the
monitor to dust, rain, water, or excessive
moisture environment.
• If your monitor gets wet, wipe it with dry
cloth as soon as possible.
• If foreign substance or water gets in your
monitor, please turn the power off immediately and disconnect the power cord. Then,
remove the foreign substance or water, and
send it to the maintenance center.
• Do not store or use the monitor in locations exposed to heat, direct sunlight or
extreme cold.
• In order to maintain the best performance
of your monitor and use it for a longer lifetime, please use the monitor in a location
that falls within the following temperature
and humidity ranges.
1
1. Important
• Temperature: 0-40°C 32-95°F
• Humidity: 20-80% RH
Important information for Burn-in/Ghost
image
• Always activate a moving screen saver
program when you leave your monitor
unattended. Always activate a periodic
screen refresh application if your monitor will display unchanging static content.
Uninterrupted display of still or static images over an extended period may cause
“burn in”, also known as “after-imaging” or
“ghost imaging”, on your screen.
• "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD
panel technology. In most cases, the
“burned in” or “after-imaging” or “ghost
imaging” will disappear gradually over a
period of time after the power has been
switched off.
Warning
Failure to activate a screen saver, or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.
Service
• The casing cover should be opened only
by qualified service personnel.
• If there is any need for any document for
repair or integration, please contact with
your local service center. (please refer to
the chapter of "Consumer Information
Center")
• For transportation information, please
refer to "Technical Specifications".
• Do not leave your monitor in a car/trunk
under direct sun light.
Note
Consult a service technician if the monitor
does not operate normally, or you are not sure
what procedure to take when the operating
instructions given in this manual have been
followed.
1.2 Notational Descriptions
The following subsections describe notational
conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be
accompanied by an icon and printed in bold or
italic type. These blocks contain notes, cautions
or warnings. They are used as follows:
Note
This icon indicates important information and
tips that help you make better use of your
computer system.
Caution
This icon indicates information that tells you
how to avoid either potential damage to
hardware or loss of data.
Warning
This icon indicates the potential for bodily harm
and tells you how to avoid the problem.
Some warnings may appear in alternate formats
and may not be accompanied by an icon. In such
cases, the specific presentation of the warning is
mandated by the relevant regulatory authority.
2
1. Important
1.3 Disposal of product and packing material
Waste Electrical and Electronic EquipmentWEEE
This marking on the product or on its
packaging illustrates that, under European
Directive 2002/96/EC governing used electrical
and electronic appliances, this product may
not be disposed of with normal household
waste. You are responsible for disposal of
this equipment through a designated waste
electrical and electronic equipment collection.
To determine the locations for dropping off
such waste electrical and electronic, contact
your local government office, the waste disposal
organization that serves your household or the
store at which you purchased the product.
Your new monitor contains materials that can
be recycled and reused. Specialized companies
can recycle your product to increase the
amount of reusable materials and to minimize
the amount to be disposed of.
All redundant packing material has been
omitted. We have done our utmost to make the
packaging easily separable into mono materials.
Please find out about the local regulations on
how to dispose of your old monitor and packing
from your sales representative.
Recycling Information for Customers
Your display is manufactured with high quality
materials and components which can be
recycled and reused.
To learn more about our recycling program
please visit www.philips.com/about/sustainability/
recycling.
3
2. Setting up the monitor
2. Setting up the monitor
Register your product and get support at
www.philips.com/welcome
Quick
Start
U
221S3
2
0
1
2
K
o
n
i
n
k
l
i
j
k
e
P
h
i
l
i
p
s
E
l
e
c
t
r
o
n
i
c
s
,
N
.
V
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
U
n
a
u
t
h
o
r
i
z
e
d
d
u
p
l
i
c
a
t
i
o
n
i
s
a
v
i
o
l
a
t
i
o
n
o
f
a
p
p
l
i
c
a
b
l
e
l
a
w
s
.
M
a
d
e
a
n
d
p
r
i
n
t
e
d
i
n
C
h
i
n
a
.
USB Cable (Y Type)
DisplayLink Driver
2.1 Installation
Package contents
Install base stand
1. Place the monitor face down on a soft
and smooth surface to avoid scratching or
damaging the screen.
3. Attach the monitor base stand to the base
column then fasten base stand.
Caution
Do not release the height adjustment pin lock
from the base column before the base stand is
firmly fixed.
DON’T
2. Hold the monitor base stand with both
hands and firmly insert the base stand into
the base column.
4
2. Setting up the monitor
Connecting to your laptop
1
223
3
1
Kensington anti-theft lock
2
USB connection
3
5V/3A AC to DC adaptor (Optional)
DSA-20PFE-05 FEU 050300
DSA-20PFE-05 FCH 050300
DSA-20PFE-05 FUS 050300
Specification: 100-240VAC, 50/60Hz (Input),
0.7A; 5VDC, 3A (Output)
Manufacturer: DEE VAN ENTERPRISE CO.,
LTD.
Note
Please note that the DisplayLink software has to
be installed in your laptop before you start to
use the USB monitor.
Connect to laptop
1. Install Display link software in your laptop.
2. Connect the supplied USB “Y” cable
between your laptop and monitor. The
single connector side connects to the
Monitor, and the “Y” dual side connector to
the laptop.
3. The USB monitor will be recognized by
the OS, and will automatically turn on after
windows installs the driver.
4. USB monitor is ready to be used as second
monitor
5. Both "Y" connectors should be connected
to the 2xUSB ports of your laptop to
ensure enough stable power is supplied to
the monitor.
Note
1. You may have to re-boot your laptop
in order to recognize the USB monitor
correctly.
2. Many new laptops may be able to supply
enough power with only 1x USB port, in
that case you may wish to free up 1x USB
port if required. If you find that the display
flickers with 1xUSB connection, or does
not light up, then please ensure that 2xUSB
ports are utilized.
3. In rare instances, your laptop’s 2xUSB ports
may not have enough power output for
the monitor; In that case you may need to
purchase an optional DC adaptor.
Philips part
number
080G L19 41DV1
080G L19 41DV2
080G L19 41DV3
Description
CONSIGN ADAPTER 5V
15W CHINA
CONSIGN ADAPTER
5V/3A 15W USA
CONSIGN ADAPTER 5V
15W EUROPE
Model of
adaptor
DSA-20PFE-05
FCH 050300
DSA-20PFE-05
FUS 050300
DSA-20PFE-05
FEU 050300
Please contact www.philips.com/support or
Local Monitor Help Desk for the details.
4. Note that the USB monitor cannot be
connected as a primary monitor to a
stand-alone PC
Warning
Never remove covers unless qualified to do
so,This unit contains dangerous voltages.Use
only DC Adapter listed in the user instruction.
5
2. Setting up the monitor
Resolution notification
This monitor is designed for optimal
performance at its native resolution, 1920 ×
1080 @ 60 Hz.
Physical Function
Tilt
Height adjustment
70mm
Note
Remove the height adjustment pin lock before
adjusting the height.
Swivel
-65
Insert the height adjustment pin lock before
lifting the monitor.
65
6
2. Setting up the monitor
2.2 Remove Base Stand and Base
Remove the Base Stand
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1. Extend the monitor base to its maximum
height.
2. Place the monitor face down on a soft
and smooth surface to avoid scratching or
damaging the screen.
3. Release the lock of base stand then pull the
base stand away from the base column.
7
2. Setting up the monitor
Remove the base
Condition:
For VESA standard mounting applications.
•
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
1. Remove the 8 screw covers.
2. Remove the 4 screws and then remove the
base from the monitor.
100mm
100mm
8
Loading...