Philips 21PT1582, 14PT1582, 20PT1582 User Manual

Colour Television

14"/20"/21"

Instructions for use

20PT1582

14PT1582

21PT1582

3139 125 27303

INSTALLATION

5 cm

22

2

Positioning of the TV set

• Place TV set on a solid base (e.g. a TV/Video cabinet)

• Leave at least 5 cm around each side of TV set for ventilation to avoid over-heating.

• Do not place TV set near a radiator or other sources of heat.

• Do not place TV set where it can be exposed to rain or excessive moisture.

Mains Connection

• For correct mains voltage, refer to type sticker at the rear of the TV set

• Consult your dealer if mains supply is different. Note : This diagram is not representative of the actual plug and socket.

Antenna Connections

• Connect the aerial plug to the antenna socket

¬¬

¬ on the backcover.

¬¬

• Insert the mains plug into a wall socket.

Use of Remote Control

• Insert correct type of batteries into the compartment.

• Ensure the batteries are placed in the right direction.

Switching on the set

• Press the mains power button to switch on/off the TV.

• If the set is on standby mode (indicator is red), press STANDBY button on the remote control to switch on set.

CONNECTING PERIPHERAL EQUIPMENT

Equipment such as VCR, Laser disc player, VCD, etc. can be connected to the video and audio (AV) sockets at the rear of the TV. Switch off mains power of the TV and equipment before making any connections.

33

3

OR

VCR

Laser disc player

outin

VIDEO

AUDIO

VCR

outin

VIDEO

AUDIO

Connection for Playback

• Connect the Video Output socket of the VCR/laser dissc player to the AV “in” socket at the rear of the TV to playback programmes.

Connection for recording

1. From the TV channel you are watching

• Connecct input sockets of the VCR to the Monitor “out” sockets at the rear of the TV to do recording.

VCR 1

outin

VIDEO

AUDIO

2. From one VCR to another VCR

• Connect the sockets of the VCR which you wish to record from to the Input sockets at the rear of the TV.

• Connect the sockets of the receiving VCR to the Monitor “out” sockets at the rear of the TV.

VCR 2

FUNCTIONS OF TV FRONT CONTROLS/SOCKETS

INSTALL /

n

VIDEO AUDIO

1

2

3

4

5

n

VIDEO AUDIO

1

2

3

4

5

MENU

˝

LK

VOLUME CHANNEL

6 7

INSTALL /

MENU

˝

LK

VOLUME

6 7

44

4

¸

˚

14PT1582

˙

20PT1582

˚

¸

˙

¸

˚

CHANNEL

21PT1582

1. Mains Power button Switch mains power on or off.

2. Standby light indicator Indicate red light when standby mode is activated.

3. Remote Sensor Aim remote control handset at remote sensor when

operating the TV.

4. Headphone socket Connect headphone jack to socket for personal listening.

5. AV “in” sockets Connect to Video “out” and Audio “out” sockets of VCR

laser disc player, etc.

˝ ˝

6. Volume

7. Channel

˙˙

˝ /

˙ button Adjust sound volume louder/softer.

˝ ˝

˙˙

¸ ¸

˚˚

¸ /

˚ button Select channel in ascending/descending order.

¸ ¸

˚˚

Note : You can enter the main menu by pressing both

˝˝

the Volume Press Channel

Press Volume

˙˙

˝ /

˙ buttons at the same time.

˝˝

˙˙

¸¸

˚˚

¸ /

˚ button to select items on the menu.

¸¸

˚˚

˝˝

˙˙

˝ /

˙ button to activate sub-menu.

˝˝

˙˙

FUNCTIONS OF REMOTE CONTROL

1. STANDBY

Switch off set temporarily to standby mode. (The red light indicator lights up when set is on standby mode). To switch on set, press STANDBY or any DIGIT button.

2. AV

Selects AV channels.

3. OSD (On-Screen Display)

– Displays channel number and

sound transmission mode.

– Allows you to exit menu from screen.

4. DIGIT (0 - 9)

Allows you select a channel. For a 2-digit channel number, the second digit must be entered before the “ – “ sign disappears.

5. SMART SOUND

Allows you to access 4 different types of sound settings and select your preferred setting.

10

55

5

1

2 3

12

4

7

SMART

5

6

7

8

9

±

MENU

A

5

8

0

H

2

SLEEPOSDAV

3

6

9

SMART

`

INC.

SURR.

CH

6. MENU

To display or exit menu from screen.

7. CURSOR UP

Allows you to select the next item on the menu.

8. CURSOR LEFT

Allows you to access the sub-menus and adjust the settings.

9. VOLUME + / –

Increases / decreases volume.

10. MUTE

Mutes sound. To restore sound, press button again.

11. TELETEXT

Not applicable.

11

b

SURF

A/CH

4

ehf

FUNCTIONS OF REMOTE CONTROL

2

12

4

7

SMART

MENU

A

±

5

8

0

H

SLEEPOSDAV

3

6

9

SMART

`

INC.

SURR.

CH

12

13

14

15

16

17

12. SLEEPTIMER

Allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer from OFF mode up to a maximum of 240 minutes.

13. SMART PICTURE

Allows you to access 4 different types of picture settings and select your preferred setting.

14. INCREDIBLE SURROUND

Not applicable.

15. CURSOR RIGHT

Allows you to access the sub-menus and adjust the settings.

16. CURSOR DOWN

Allows you to select the next item on the menu.

17. CHANNEL + / –

Allows you to select channel in ascending or descending order.

66

6

b

SURF

A/CH

4

ehf

18

19

44

18.

4

44

Not applicable for

19. SURF / ALTERNATE CHANNEL

– When surf mode is activated through

the main menu, it allows you to select up to a maximum of 8 channels and view quickly the selected channels .

– It also allows you to alternate between

the last viewed channel and the present channel if alternate channel mode is activated.

4 4

4 feature.

4 4

AUTOMATIC TUNING OF THE TV CHANNELS

Selecting the language and Automatic Tuning

Press button Result on TV Screen

77

7

12

4

7

SMART

±

MENU

A

b

5

8

0

H

SURF

A/CH

2

SLEEPOSDAV

3

6

9

SMART

`

INC.

SURR.

4

ehf

MENU

CH

1. Enter main menu.

2. Select INSTALLATION.

3. Enter installation menu. LANGUAGE option is highlighted.

BLUE MUTE OFF INSTALLATION

BRIGHTNESS

COLOUR CONTRAST

SURF A/CH BLUE MUTE OFF

INSTALLATION

BRIGHTNESS COLOUR

LANGUAGE ENGLISH

AUTO STORE SWAP

IIIII

IIII IIIIIIII

IIIII IIII

❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙

❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙

❙ ❙ ❙ ❙ ❙ ❙

❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙

❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙

ÉÉ

É

ÉÉ

28

18 38

ÉÉ

É

ÉÉ

28 18

ÉÉ

É

ÉÉ ÉÉ

É

ÉÉ

4. Select your desired

OR

language.

5. Select AUTO STORE.

LANGUAGE ENGLISH

AUTO STORE

SWAP SKIP

ÉÉ

É

ÉÉ

É

ÉÉ ÉÉ

É

ÉÉ

6. Start automatic tuning.

7. After tuning is completed, the installation menu will appear.

OSD

8. Exit menu from screen.

AUTOSTORE 050 MHZ

CHANNEL 1

LANGUAGE ENGLISH

AUTO STORE

SWAP SKIP

ÉÉ

É

ÉÉ

É

ÉÉ ÉÉ

É

ÉÉ