Philips 206V6QSB6, 206V6 User Manual

206V6

www.philips.com/welcome

EN User manual 1
Customer care and warranty 20
Troubleshooting & FAQs 25

Table of Contents

1. Important ................................................ 1

1.1 Safety precautions and maintenance ...1

1.2 Notational Descriptions .............................2

1.3 Disposal of product and packing

material ................................................................3

2. Setting up the monitor ......................... 4

2.1 Installation ...........................................................4

2.2 Operating the monitor ...............................5

2.3 Remove Base Stand and Base .................7

3. Image Optimization ...............................9

3.1 SmartContrast .................................................9

4. Technical Specifications ......................10

4.1 Resolution & Preset Modes...................12

5. Power Management ............................13

6. Regulatory Information ......................14

7. Customer care and warranty ..........20

7.1 Philips’ Flat Panel Monitors Pixel

Defect Policy ..................................................20

7.2 Customer Care & Warranty .................22

8. Troubleshooting & FAQs ...................25

8.1 Troubleshooting ...........................................25

8.2 General FAQs ...............................................26

1. Important

1. Important

This electronic user’s guide is intended for
anyone who uses the Philips monitor. Take time
to read this user’s manual before you use your
display. It contains important information and
notes regarding the operation of your display.

The Philips guarantee applies provided the
product is handled properly for its intended use,
in accordance with its operating instructions and
upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer’s
name and model and production number of the
product.

1.1 Safety precautions and mainte­nance

Warnings

Use of controls, adjustments or procedures
other than those specified in this documentation
may result in exposure to shock, electrical
hazards and/or mechanical hazards.

Read and follow these instructions when
connecting and using your computer monitor.

Operation

• Please Keep the monitor out of direct

sunlight, very strong bright lights and
away from any other heat source. Lengthy
exposure to this type of environment may
result in discoloration and damage to the
monitor.

• Remove any object that could fall into

ventilation holes or prevent proper cooling
of the monitor’s electronics.

• Do not block the ventilation holes on the

cabinet.

• When positioning the monitor, make sure

the power plug and outlet are easily ac­cessible.

• If turning off the monitor by detaching the

power cable or DC power cord, wait for 6
seconds before attaching the power cable
or DC power cord for normal operation.

• Please use approved power cord provided

by Philips at all times. If your power cord is
missing, please contact your local service
center. (Please refer to Customer Care
Consumer Information Center)

• Do not subject the monitor to severe

vibration or high impact conditions during
operation.

• Do not knock or drop the monitor during

operation or transportation.

Maintenance

• To protect your monitor from possible

damage, do not put excessive pressure on
the LCD panel. When moving your moni­tor, grasp the frame to lift; do not lift the
monitor by placing your hand or fingers on
the LCD panel.

• Unplug the monitor if you are not going to

use it for an extensive period of time.

• Unplug the monitor if you need to clean it

with a slightly damp cloth. The screen may
be wiped with a dry cloth when the power
is off. However, never use organic solvent,
such as, alcohol, or ammonia-based liquids
to clean your monitor.

• To avoid the risk of shock or permanent

damage to the set, do not expose the
monitor to dust, rain, water, or excessive
moisture environment.

• If your monitor gets wet, wipe it with dry

cloth as soon as possible.

• If foreign substance or water gets in your

monitor, please turn the power off immedi­ately and disconnect the power cord. Then,
remove the foreign substance or water, and
send it to the maintenance center.

• Do not store or use the monitor in loca-

tions exposed to heat, direct sunlight or
extreme cold.

• In order to maintain the best performance

of your monitor and use it for a longer life­time, please use the monitor in a location
that falls within the following temperature
and humidity ranges.

1

1. Important

• Temperature: 0-40°C 32-95°F

• Humidity: 20-80% RH

Important information for Burn-in/Ghost
image

• Always activate a moving screen saver

program when you leave your monitor
unattended. Always activate a periodic
screen refresh application if your moni­tor will display unchanging static content.
Uninterrupted display of still or static im­ages over an extended period may cause
“burn in”, also known as “after-imaging” or
“ghost imaging”, on your screen.
"Burn-in", "after-imaging", or "ghost imag­ing" is a well-known phenomenon in LCD
panel technology. In most cases, the
“burned in” or “after-imaging” or “ghost
imaging” will disappear gradually over a
period of time after the power has been
switched off.

Warning

Failure to activate a screen saver, or a periodic
screen refresh application may result in severe”
burn-in” or “after-image” or “ghost image”
symptoms will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.

Service

• The casing cover should be opened only

by qualified service personnel.

• If there is any need for any document for

repair or integration, please contact with
your local service center. (please refer to
the chapter of "Consumer Information
Center")

• For transportation information, please

refer to "Technical Specifications".

• Do not leave your monitor in a car/trunk

under direct sun light.

Note

Consult a service technician if the monitor
does not operate normally, or you are not sure
what procedure to take when the operating

instructions given in this manual have been
followed.

1.2 Notational Descriptions

The following subsections describe notational
conventions used in this document.

Notes, Cautions and Warnings

Throughout this guide, blocks of text may be
accompanied by an icon and printed in bold or
italic type. These blocks contain notes, cautions
or warnings. They are used as follows:

Note

This icon indicates important information and
tips that help you make better use of your
computer system.

Caution

This icon indicates information that tells you
how to avoid either potential damage to
hardware or loss of data.

Warning

This icon indicates the potential for bodily harm
and tells you how to avoid the problem.

Some warnings may appear in alternate formats
and may not be accompanied by an icon. In such
cases, the specific presentation of the warning is
mandated by the relevant regulatory authority.

2

1. Important

1.3 Disposal of product and packing
material

Waste Electrical and Electronic Equipment­WEEE

This marking on the product or on its
packaging illustrates that, under European
Directive 2012/19/EU governing used electrical
and electronic appliances, this product may
not be disposed of with normal household
waste. You are responsible for disposal of
this equipment through a designated waste
electrical and electronic equipment collection.
To determine the locations for dropping off
such waste electrical and electronic, contact
your local government office, the waste disposal
organization that serves your household or the
store at which you purchased the product.

Your new monitor contains materials that can
be recycled and reused. Specialized companies
can recycle your product to increase the
amount of reusable materials and to minimize
the amount to be disposed of.

All redundant packing material has been
omitted. We have done our utmost to make the
packaging easily separable into mono materials.

Please find out about the local regulations on
how to dispose of your old monitor and packing
from your sales representative.

Taking back/Recycling Information for
Customers

Philips establishes technically and economically
viable objectives to optimize the environmental
performance of the organization's product,
service and activities.

From the planning, design and production
stages, Philips emphasizes the important of
making products that can easily be recycled. At
Philips, end-of-life management primarily entails
participation in national take-back initiatives
and recycling programs whenever possible,
preferably in cooperation with competitors,
which recycle all materials (products and related
packaging material) in accordance with all
Environmental Laws and taking back program
with the contractor company.

Your display is manufactured with high quality
materials and components which can be
recycled and reused.

To learn more about our recycling program
please visit

http://www.philips.com/sites/philipsglobal/
about/sustainability/ourenvironment/
ourrecyclingprogram.page

3

2. Setting up the monitor

2. Setting up the monitor

VGA

AC/DC Adapter

Register your product and get support at

www.philips.com/welcome

206V6

Quick

Start

2

0

1

5

K

o

n

i

n

k

l

i

j

k

e

P

h

i

l

i

p

s

N

.

V

.

A

l

l

r

i

g

h

t

s

r

e

s

e

r

v

e

d

.

U

n

a

u

t

h

o

r

i

z

e

d

d

u

p

l

i

c

a

t

i

o

n

i

s

a

v

i

o

l

a

t

i

o

n

o

f

a

p

p

l

i

c

a

b

l

e

l

a

w

s

.

M

a

d

e

a

n

d

p

r

i

n

t

e

d

i

n

C

h

i

n

a

.

V

e

r

s

i

o

n

Monitor drivers

User’s Manual

使用

前请阅读使用说明

保留备用

2.1 Installation

Package contents

Note

Use only the AC/DC adapter model:
Philips ADPC1936

Philips ADS-25FSG-19 19025GPCN

Install base stand

1. Place the monitor face down on soft
and smooth surface taking care to avoid
scratching or damaging the screen.

2. Attach/Slide the base column with the
monitor until it clicks into position.

3. Hold the monitor base stand with both
hands and firmly insert the base stand into
the base column.

4

2. Setting up the monitor

Connecting to your PC

1

3

2

2

1

AC/DC power input
VGA input

Kensington anti-theft lock

2.2 Operating the monitor

Front view product description

Connect to PC

1. Connect the power cord to the back of
the monitor firmly.

2. Turn off your computer and unplug its
power cable.

3. Connect the monitor signal cable to the
video connector on the back of your
computer.

4. Plug the power cord of your computer and
your monitor into a nearby outlet.

5. Turn on your computer and monitor. If the
monitor displays an image, installation is
complete.

5

6 2347

Switch monitor’s power ON and
OFF.

Access the OSD menu

.

Confirm the OSD adjustment.
Return to previous OSD level.
Adjust the brightness level.
Adjust the OSD menu.

Change display format.

Automatically adjust the monitor.

5

2. Setting up the monitor

Description of the On Screen Display





 



 







 











What is On-Screen Display (OSD)?

On-Screen Display (OSD) is a feature in all
Philips LCD monitors. It allows an end user to
adjust screen performance or select functions
of the monitors directly through an on-screen
instruction window. A user friendly on screen
display interface is shown as below:



Basic and simple instruction on the control
keys

In the OSD shown above, you can press

buttons at the front bezel of the monitor
to move the cursor, and press OK button to
confirm the choice or change.

The OSD Menu

Below is an overall view of the structure of
the On-Screen Display. You can use this as a
reference when you want to work your way
around the different adjustments later on.

Main menu Sub menu

Wide Screen, 4:3, 1:1

0~100

0~100
On, Off

1.8, 2.0, 2.2, 2.4, 2.6

6500K, 9300K

Red: 0~100

Green: 0~100

Blue: 0~100

Türkçe,

0~100

0~100

Off, 1, 2, 3, 4

5s, 10s, 20s, 30s, 60s

0~100

0~100

0~100

0~100

On, Off
Yes, No

Picture

Color

Language

OSD Settings

Setup

Picture Format
Brightness

Contrast
SmartContrast
Gamma

Color Temperature

sRGB

User Define

English,Español,Français,Deutsch,Italiano,
Português,Русский,简体中文,
Nederlands, Svenska, Suomi, Polski, Čeština

한국어,

日本語, Maryar, Українська,

Português do Brazil, Ελληνική , 繁體中文

Horizontal

Vertical

Transparency

OSD Time Out

Auto

H. Position

V. Position

Phase

Clock

Resolution Notification
Reset

Information

6

2. Setting up the monitor

Resolution notification

This monitor is designed for optimal
performance at its native resolution, 1440 ×
900 @ 60 Hz. When the monitor is powered
on at a different resolution, an alert is displayed
on screen: Use 1440 × 900 @ 60 Hz for best
results.

Display of the native resolution alert can be
switched off from Setup in the OSD (On
Screen Display) menu.

Physical Function

Tilt

20

2.3 Remove Base Stand and Base

Remove the Base Stand

Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.

1. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen.

-5

2. Press the locking clips to detach the base
stand away from the base column.

1

3. Press the release button to detach the base
column.

2

7

2. Setting up the monitor

Note

This monitor accepts a 100mm x 100mm VESA­Compliant mounting interface.

100mm

100mm

Caution

For use only with UL Listed Wall Mount Bracket
with minimum weight/load 3.5Kg

8