Philips 19B2502H99 User Manual
Table of Contents
GETTING STARTED
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
S
AFETY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
D
ESCRIPTION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
S
ETTING UP GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FOLDOUT
HOW TO USE THE ON SCREEN DISPLAY
FRONT PANEL CONTROLS
CONTRAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B
RIGHTNESS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
M
AIN MENU
DEGAUSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
M
ONITOR STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
M
AIN MENU / ADVANCED CONTROLS WINDOW
POWER SAVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
L
ANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OSD T
IMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
M
OIRE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
M
AIN MENU / COLOR TEMPERATURE WINDOW
9300˚ K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6500˚ K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
U
SER 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
U
SER 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
M
AIN MENU / GEOMETRY WINDOW
ROTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
P
INCUSHION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
T
RAPEZOID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B
ALANCED PINCUSHION . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
P
ARALLELOGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
M
AIN MENU / SIZE & POSITION WINDOW
Z
OOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
H
ORIZONTAL POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
H
ORIZONTAL SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
V
ERTICAL POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
V
ERTICAL SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
M
AIN MENU / SAVE & CANCEL . . . . . . . . . . . . . . . . . . . . . . . . . 13
M
AIN MENU / EXIT OSD & RESET . . . . . . . . . . . . . . . . . . . . . . 13
ADDITIONAL INFORMATION
AUDIO & USB SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
P
OWER SAVING FEATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
G
LOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
P
IN ASSIGNMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
S
PECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
I
NDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
T
ROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
W
ARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
19B2502H
Other language version
FRENCH (FRANCAIS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
appendix
ENGLISH INFORMATION FOR USERS IN THE U.S. . . . . . . . . . . . . . . . . . . . . . . . . . .A1
FCC D
ECLARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A2
E
NERGY DECLARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A3
TCO'99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A4-A5
D
EUTSCH HINWEIS / GS / ACHTUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A6
F
RANCAIS FCC DECLARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A7
D
ANSK ADVARSEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A8
N
ORSK ADVARSEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A8
S
VENSKA VARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A8
S
UOMI VAROITUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A8
Japanese VCCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A9
BECAUSE OF CONTINUOUS PRODUCT IMPROVEMENTS,
THE INFORMATION MENTIONED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
1
Introduction and Safety
Safety precautions and maintenance
• Unplug the monitor, if you are not going to use it for an
extended period of time.
• Unplug the monitor, if you need to clean it with a slightly
damp cloth.Wiping the screen with a dry cloth is okay when
the power is disconnected. However, never use alcohol or
ammonia-based liquids.
• Consult a service technician if the monitor does not operate
normally when following the instructions in this manual.
• The back cover should be removed only by qualified service
personnel.
• Keep the monitor out of direct sunlight and away from stoves
or any other heat source.
• The top of the monitor is not a shelf. Remove any object that
could fall into the vents or prevent proper cooling of the
monitor’s electronics.
• Keep the monitor dry.To avoid electric shock, do not expose
it to rain or excessive moisture.
• Keep the monitor away from magnetic objects, such as
speakers, electric motors, transformers, etc.
• When positioning the monitor, make sure the power plug and
outlet are easily accessible.
End-of-life disposal
Your new monitor contains materials that can be recycled and
reused. Specialized companies can recycle your product to
increase the amount of reusable materials and to minimize the
amount to be disposed of.
Please find out about the local regulations on how to dispose
of your old monitor.
ENERGY STAR is a U.S. registered mark.
IBM, IBM PC, and Power PC are registered trademarks of International Business Machines Corporation.
Apple, Macintosh, Quadra,Performa, and Centris are registered trademarks of Apple Computer, Inc.
Contact us at our web site: http://www.monitors.be.philips.com
Introduction
The Philips 109B color monitor displays sharp and brilliant
images of text and graphics with a maximum resolution of
1600x1200 pixels. It is optimal for Windows, CAD / CAM / CAE,
desktop publishing, spread sheets, multi-media,and any other
application that demands a large screen size and high
resolutions.
The monitor automatically scans horizontal frequencies from
30KHz to 95KHz, and vertical frequencies from 50Hz to 160Hz.
With microprocessor-based digital-controlled circuitry and On
Screen Display (OSD) controls, the monitor can automatically
adjust itself to the video card’s scanning frequency and can
display an image with the precise parameters you desire.
Features
• An anti-glare, anti-static, anti-reflection, high-contrast screen
coating eliminates any bad effects caused by room light
reflecting on and dust attracted to the screen’s surface.
• With the Color Adjustment feature, you can easily choose
different preset color temperatures or set your own
customized color parameters.
• The Image Tilt Adjustment feature corrects a rotated image.
This adjustment compensates for the distortions caused by
elements such as the Earth’s magnetic field.
• The full-size feature expands the image on the monitor to fill
the screen when used in factory preset modes.
• USB upstream port at the back of the monitor is prepared for
the Universal Serial Bus hub. The USB hub is an accessory that
may be purchased from your local Philips dealer.
• Green Design – including automatic power saving function
(NUTEK) and low-emission compliance
• DDC1 / DDC2B allows communication between the monitor
and the PC for optimal video configuration.
• Moire Cancellation eliminates diffraction, a fringe pattern in
the picture.
NOTE: Your monitor operates according to the VESA-standard DDC
level 1 / 2B. Only computers that support the same guidelines and
operate at an equal or higher level can use this feature. If your
computer does not support the relevant guidelines, you can still use
your monitor and computer.However, you may need to manually
specify the appropriate resolution in the computer.
As an ENERGY STAR®Partner,
PHILIPS has determined that
this product meets the
ENERGY
STAR
®
guidelines for energy
efficiency.
2
Description of Controls
POWER Button –
Turns the
electricity On and
Off.
B
RIGHTNESS Button –
Press the button to
adjust the screen’s
brightness.
CONTRAST Button – Press this
button to adjust the screen’s
contrast.
ON SCREEN DISPLAY (OSD) Button –
Brings up the On Screen Display and
helps you navigate through it.
"+" Button – Press this button to scroll the
highlight down.
VIDEO IN Jack – One end of the cable is already connected here.The other
end connects to the computer. See foldout for details.
P
OWER Plug – Plug the power cord in
here. See foldout for details.
LED – Light Emitting Diode
turns green when the
monitor is on and at full
power.
"-" Button – Press this button to
scroll the highlight up.
USB upstream port – One end of USB
cable is connected here. The other end
connects to PC or USB hub. You can buy USB
hub from your local Philips dealer.
AUDIO IN JACK AUDIO OUT JACK
See Page 14 for more details.
3
GEOMETRY CONTROLS – This
menu item has five features:
P
INCUSHION, BALANCED PINCUSHION,
T
RAPEZOID, PARALLELOGRAM,and
R
OTATION. To adjust these
features, turn to page 10.
Description of Controls
COLOR TEMPERATURE –
Select the
temperature setting
for the best color for
your work. You can
even customize your
color settings. There
are four selections:
9300˚ K, 6500˚ K, U
SER
1, and USER 2. For
details, turn to pages
8-9.
O
N SCREEN DISPLAY – Your monitor is preset at the factory. However, you can adjust it using the ON SCREEN DISPLAY button
and the "+"
OR "-" BUTTON described on page 2. The way to do so is through the On Screen Display (OSD). Below is a
brief description of the seven On Screen Display windows.
A
DVANCED CONTROLS – This menu
item has six features: P
OWER
SAVING, LANGUAGE, OS TIMER,and
M
OIRE. To adjust these features,
turn to pages 6-7.
Note: L
ANGUAGE
allows you to
change the On Screen Display
from English to French, Spanish,
German, or Italian. See page 6
for details.
PEDESTAL – With the built-in pedestal,
you can tilt and swivel the monitor to
the most comfortable viewing angle.
To best use your monitor, always
place it at eye level.
90
0
90
0
5
0
15
0
MONITOR STATUS –
Lists the current
vertical and
horizontal scanning
frequencies and
tells you the serial
number of the
monitor. For details,
see page 5.
USING THE FRONT PANEL
BUTTONS
– Select one
of front panel
buttons, then press
"-" or "+" button to
make the
adjustment or select
an additional
feature. To adjust a
particular feature,
see the page for that
feature.
For
example, Contrast is
on page 4.
FRONT PANEL BUTTONS
PEDESTAL
DEGAUSS –
Demagnetizes
your screen. If
color splotches
or impurities
appear on your
screen, you
may want to
try this. For
details, see
page 5.
SIZE & POSITION – This menu item helps you maximize the position of your
screen. It has five features: Z
OOM, HORIZONTAL POSITION, HORIZONTAL SIZE, VERTICAL
POSITION, and VERTICAL SIZE.To adjust these features, turn to pages 11- 12.
4
How to Use the On Screen Display (OSD)
Contr
Contr
ast
ast
Smart Help
To continue to Brightness,
press the BRIGHTNESS button on the front
of the monitor.Next, follow steps 2 - 3 under B
RIGHTNESS.
If you do not press the C
ONTRAST
button a second time,
the
Contrast window will “time out” (disappear) after five seconds.You
can change this time. See page 7 for time out options.
1
1
Brightnes
Brightnesss
To adjust your screen’s contrast, follow the steps below.
Contrast is the difference between the light and dark areas on
the screen. A 100% contrast level is recommended.
Smart Help
If you do not press the B
RIGHTNESS
button a second time,
the
Brightness window will “time out” (disappear) after five seconds.
You can change this time.See page 7 for time out options.
1
1
Front Panel Controls
To adjust your screen’s brightness, follow the steps below.
Brightness is the overall intensity of the light coming from the
screen. A 50% brightness level is recommended.
2
2
Press "-" or
"+" button
to adjust
the
brightness.
When
finished,
press the
B
RIGHTNESS
button
again. The
Brightness
screen
disappears.
3
3
2
2
Press "-" or
"+" button
to adjust
the
contrast.
When
finished,
press the
C
ONTRAST
button
again. The
Contrast
screen
disappears.
3
3
Press the Contrast button
(first one from the left)
on the front of the
monitor.
Press the Brightness
button (second one from
the left) on the front of
the monitor.
The Brightness
window appears.
The Contrast
window appears.
5
How to Use the On Screen Display (OSD)
Deg
Deg
aus
ausss
Degaussing removes electromagnetic build up that may distort
the color on your screen. To degauss your screen, follow the
steps below.
Smart Help
After returning to the Main Menu . . .
. . .to continue to M
ONITORSTATUS
,
press "+" or "-" button until
M
ONITOR STATUS is highlighted. Next, follow steps 2 - 3 under MONITOR
STATUS in the next column.
. . .to exit completely,
press the OSD button.
Press the ON SCREEN
DISPLAY button.
Press "-" or "+"
button until
D
EGAUSS is
highlighted.
1
1
Monitor St
Monitor Staa
tus
tus
Monitor Status tells you the vertical and horizontal scanning
frequencies that your computer is using to operate your
monitor. It also tells you the serial number of your monitor.
Note: This
screen is for review only.
Smart Help
After returning to the Main Menu . . .
. . .to continue to A
DVANCEDCONTROLS
,
press "+" or "-" button until
A
DVANCED CONTROLS is highlighted. Next, follow steps 2 - 3 under
A
DVANCED CONTROLS on the next page.
. . .to exit completely,
press the OSD button.
Note: Neither the scanning frequencies nor the serial number
can be changed at this screen. The scanning frequencies are
established by your computer. They also appear at the top of the
Main Menu screen. The serial number is entered at the factory.
Press the ON SCREEN
DISPLAY button.
3
3
Press the ON SCREEN
DISPLAY button to bring
up the M
ONITOR STATUS
screen.
Press the ON
SCREEN DISPLAY
button to exit the
Monitor Status
screen and
return to the
Main Menu. E
XIT
OSD will be
highlighted.
1
1
2
2
Press "-" or "+"
button until
M
ONITOR STATUS is
highlighted.
Main Menu windows
For a moment, the
screen will be
distorted. Then it
will return to
normal. You will be
at Main Menu. E
XIT
OSD will be
highlighted.
4
4
2
2
Press the ON
SCREEN DISPLAY
button to
degauss your
3
3
Loading...