LCD TVLCD TV
LCD TV
Operating Instructions
15PF9936
15PF9936/69 p1 4/7/03, 12:53 PM1
TABLE OF CONTENTS
Safety Information/Precaution ................................................................................................ 3
Hooking Up Your TV Use / Care of Remote Control ....................................................4
Checking the Supplied Accessories .......................................................................................5
Dressing the Cables .................................................................................................................. 5
Monting Procedures for LCD TV........................................................................................... 6
Connecting the Audio/Video Sockets (Playback) /(Recording) ...................................... 7 – 8
Connecting the Audio Equipment, Amplifier and Subwoofer ......................................... 9
Connecting the Headphone .................................................................................................... 9
Connecting the FM Radio Mains ............................................................................................ 9
Connecting the PC Equipment ............................................................................................... 10
Connecting the HD (High Definition) Equipment ..............................................................10
Functions of Remote Control .................................................................................................11 – 12
Functions of TV Top Controls ............................................................................................... 13
Accessing the TV Main Menu and Sub-Menus......................................................................14
Overview of TV Main Menu and Sub-Menus .......................................................................14 – 15
Overview of FM Radio Main Menu and Sub-Menus ...........................................................16
Overview of PC Main Menu and Sub-Menus .......................................................................17
Overview of HD Main Menu and Sub-Menus ......................................................................18
Accessing the TV Installation Menu
Choosing the Menu Language and Automatic Tuning of LCD TV Channels ..............19
Manual Tuning of LCD TV Channels ................................................................................... 20
Selecting the Colour/Sound System........................................................................................21
Fine Tuning of LCD TV Channels ..........................................................................................22
Sorting of LCD TV Channels .................................................................................................23
Editing of LCD TV Channels ..................................................................................................24
Naming of LCD TV Channels ................................................................................................25
Using the LCD TV Picture/Sound Menu ...............................................................................26
Accessing the TV Features Installation Menu
Activating the Timer...................................................................................................................27 – 28
Using the Mode Select ..............................................................................................................29
Activating the Child Lock..........................................................................................................30 – 33
Using the Screen Formats ........................................................................................................34
Activating the Sleeptimer.......................................................................................................... 35
Activating the Active Control .................................................................................................35
Activating the TV Smart Picture /Sound Control .............................................................. 36
Using the Teletext...................................................................................................................... 37 – 38
Accessing the FM Radio Installation Menu
Language, Auto Store, Manual Store, Sort, Name ............................................................. 39
Using the FM Radio Sound Menu............................................................................................40
Using the FM Radio Smart Sound Control........................................................................... 40
Accessing the FM Radio Features Menu
Activating the Timer...................................................................................................................41
Using the Mode Select ..............................................................................................................42
Activating the Screensaver........................................................................................................42
Accessing the PC Mode ............................................................................................................43
PC Display Setup.........................................................................................................................44
Using the PC Picture-in-Picture Feature............................................................................... 44
PC Modes Support .....................................................................................................................45
Accessing the HD (High Definiton) Mode
Using the HD Picture/Sound Menu ........................................................................................46
Using the HD Mode Select ......................................................................................................47
Using the HD Lock Channel ....................................................................................................47
Before Calling Service (TV Mode) ......................................................................................... 48
Before Calling Service (PC / FM Radio Mode) ....................................................................49
Specifications................................................................................................................................50
15PF9936/69 p2-6 4/7/03, 12:54 PM2
2
SAFETY INFORMATION
• Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– cleaning the TV screen. Never use abrasive cleaning agents.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
• No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
• Do not place your TV set under direct sunlight or heat.
• Leave at least 5 cm around each side of TV set to allow for proper ventilation.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or
water.
• No objects (such as vases) filled with liquids should be placed on top the TV so as to avoid
dripping or splashing of liquids on the set.
PRECAUTION
• Do not shift or move the set around when it is switched on.
• Do not connect AC/DC adaptor to your set that does not originally comes with the set.
Only use recommended part that is approved by Philips manufacturer.
• Caution : Do not use cover or enclose the AC/DC adaptor with any objects like a cloth or
box which might shorten the life time of the equipment.
• Do not touch, push or rub the surface with hard object.
• When the surface becomes dusty, wipe gently with absorbent cotton or other soft materials
like chamois, soak with petroleum benzene. Do not use acetone, toluene and acohol as it
causes chemical damage to the polarizer.
• Wipe off saliva or water droplets as soon as possible. Long time contact with polarizar
causes deformations and colour fading.
• Be careful of condensation at sudden temperature change. Condensation does damage to
polarizar or electrical contact parts. After condensation fades, smear or spot will occur.
Recycling Directive – To minimise harm to the environment, the batteries
supplied with the TV set do not contain mercury or nickel cadmium. If possible,
when disposing of batteries, use recycling means available to you. Your TV set
uses materials which are reusable or which can be recycled. To minimise the
amount of waste in the environment, specialist companies recover used sets
for dismantling and collection of reusable materials (contact your dealer).
15PF9936/69 p2-6 4/7/03, 12:54 PM3
3
HOOKING UP YOUR TV (BASIC CONNECTION)
ÉÑ
Positioning of the TV set
• Place your TV set on a solid base, strong enough to
withstand the weight of the set.
• Leave a space of at least 5 cm around each side of the
ÉÑ
TV set to allow for proper ventilation.
ª Do not place TV set near a radiator or other sources
of heat.
• Do not place TV set where it can be exposed to rain
or excessive moisture.
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
Mains Connection
• Insert the mains plug into the wall socket. For correct
mains voltage, refer to type sticker at the rear of the
adaptor.
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the actual
plug and socket.
5 cm
5 cm
5cm
ÉÑ
USE/CARE OF REMOTE CONTROL
15PF9936/69 p2-6 4/7/03, 12:54 PM4
Switching on the Set
• Press the main power button on the top controls
to switch on/off the TV.
• If the set is on standby (indicator is red), press the
Power button on the remote control to switch on
set.
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
4
CHECKING THE SUPPLIED ACCESSORIES
The following accessories are supplied together with the LCD set.
V
C
R
D
V
D
MODE
æ
v
S
MAR
o
T
X
ACTIVE
M
ENU
g
C
ONTR
b
SM
OL
ART
V
k
OK
M
U
P
T
CTV
E
¬
1
4
q
P
R
2
ADIO
7
5
i
3
8
6
0
9
Remote Control 2 AA Batteries Antenna Cable Mains Plug
Note : This plug is not
representative of the actual
plug.
DRESSING THE CABLES
For better cable management, it is advisable to insert all cables through the hole of the
stand as shown in the diagram after connecting to the respective connectors. For connection
description, refer to sections on :
– Connecting the Audio/Video Sockets (Playback)
– Connecting the Audio/Video Sockets (Recording)
– Connecting to the Audio Equipment, Amplifier and Subwoofer
– Connecting to the Headphone
– Connecting to the FM Radio Mains
– Connecting the PC Equipment
– Connecting the HD (High Definition) Equipment
5
15PF9936/69 p2-6 4/7/03, 12:54 PM5
MOUNTING PROCEDURES FOR LCD TV
If you want to mount the LCD TV on any device, this set has four mounting interfaces fulfilling
VESA specifications.
Screws
Stand
1) Lay the LCD TV face-down on a flat surface with a cushion or other soft material to
protect the screen.
2) Remove all cables connected on the TV.
3) Remove the four screws and then remove the stand from the LCD TV.
4) Screw in mounting plate. Reconnect all cables to the LCD TV.
You are now ready to mount the device. Below is an example of adjusted ranges and
mounting options (VESA compatible).
Rear of LCD TV
Screws
15PF9936/69 p2-6 4/7/03, 12:54 PM6
6
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the
AUDIO and VIDEO INPUT sockets on the rear of the TV.
Pb
FM ANT
in
Camcorder
Pr Y
COMP
VIDEO
INPUT
AV1
L
R
in
Audio in
VCR
Back of S-VHS VCR
Video in
– Connect the VIDEO and AUDIO IN
sockets on the rear of the LCD TV to the
AUDIO and VIDEO OUT sockets on
the VCR.
The S-Video connection on the Side of
the LCD TV is used for the playback of
S-VHS VCR tapes, Video Discs, Video
Games or Compact Disc-Interactive (cd-i)
discs. Better picture detail and clarity is
possible with the S-Video playback as
compared to the picture from a normal
antenna (RF) connection.
– Connect the S-VIDEO socket on the
side of the LCD TV to the S-VHS OUT
socket on a S-VHS VCR.
– Connect the AUDIO IN sockets from
the rear of the TV to the AUDIO OUT
sockets on the VCR. Note : You need
not connect the VIDEO IN socket of the
LCD TV if S-VIDEO IN socket is
connected.
For more convenient direct playback
connections, the Side Audio/Video Input
sockets allow for quick and easy
connections, particularly Camcorder tape
recordings.
– Connect the S-VIDEO socket (if
available) from the Camcorder to the
Side S-VIDEOsocket of the TV. You
need not connect the Side VIDEO IN
socket of the TV if the S-VIDEO socket
is connected.
– Connect the AUDIO OUT sockets
(Right and Left) from the Camcorder to
the Side AUDIO IN sockets.
DC in PC input (VGA)
Rear of TV
Rear of VCR
OUT
ANTENNA
IN
Side Controls
OUT
R
AUDIO
IN
Audio in (PC / HD)
L
HD input
R
YPbPr
Audio
out
OUT
VIDEO
IN
VCR (Equipped
with Video and
Audio sockets)
L
75
AV1
Monitor
out
OUT
L
R
AUDIO
IN
OUT
OUT
OUT
S-VIDEO
VIDEO
ANTENNA
IN
IN
15PF9936/69 p7-13 4/7/03, 12:55 PM7
7
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
DVD (Equipped
with "Y", "Pb" and "Pr"
and Output sockets)
Pb
Pr Y
COMP
FM ANT
VIDEO
INPUT
AV1
L
R
in
Audio in
Video in
in
Pb
Y
Pr
LR
AUDIO
DC in PC input (VGA)
L
R
Audio in (PC / HD)
HD input
YPbPr
Audio
out
Monitor
75
AV1
out
You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT
sockets at the rear of the LCD TV.
– Connect the “Y”, “Pb” and the “Pr” sockets at the rear of the LCD TV to the “Y”, “Pb”
and “Pr” OUTPUT sockets of the DVD player to view playback of DVD discs.
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)
ANTENNA
OUT
ANTENNA
IN
VCR (Equipped
with Video and
Audio sockets)
OUT
IN
OUT
VIDEO
Side Sockets
VCR (Equipped
with Video and
Audio sockets)
OUT
OUT
VIDEO
R
AUDIO
IN
IN
Side Sockets
OUT
L
R
AUDIO
IN
IN
L
ANTENNA
Connection for recording from
the TV channel
– Connect the corresponding INPUT
sockets of the VCR to the MONITOR
OUTPUT sockets at the rear of the
LCD TV.
VCR
Connection for recording from
one VCR to another VCR
– Connect the sockets of the VCR which
OUT
OUT
OUT
L
VIDEO
R
AUDIO
IN
IN
IN
VCR 2
you want to record from, to the
corresponding sockets at AV2.
– Connect the sockets of the receiving VCR
to the MONITOR OUTPUT sockets
at the side of the LCD TV.
15PF9936/69 p7-13 4/7/03, 12:55 PM8
VCR 1
8
CONNECTING TO THE AUDIOEQUIPMENT, AMPLIFIER AND SUBWOOFER
SUBWOOFER
SPEAKERS
L R
Side Controls
Connect the audio cable to the audio input
of your audio equipment and to AUDIO L
and R at the rear of the TV
If you have a subwoofer, connect the cable
from Subwoofer Out socket to an external
amplifier.
You can listen to your TV sound via your
audio equipment.
Note : If you want to connect more
equipment to your TV, consult your dealer.
CONNECTING TO THE HEADPHONE
SIDE CONTROLS
(EXTERNAL 2)
Insert the plug into the headphone soket
; at the Side sockets of the LCD TV.
CONNECTING TO THE FM RADIO MAINS
DC in PC input (VGA)
To FM
Radio
Mains
15PF9936/69 p7-13 4/7/03, 12:55 PM9
Audio in (PC / HD)
L
HD input
R
Rear of TV
Y
Pb
Audio
out
Pr
Monitor
out
75
AV1
VIDEO
INPUT
AV1
L
R
in
Audio in
Video in
in
Pb
Pr Y
COMP
FM ANT
To enable you to access FM radio mode in
the TV, you must connect from FM Antenna
socket to the
FM Radio mains.
9
CONNECTING THE PC EQUIPMENT
To Mains
Adaptor
Rear of TV
Pb
Pr
Y
COMP
VIDEO
INPUT
AV1
L
R
in
Audio in
Video in
DC in PC input (VGA)
Audio in (PC / HD)
L
HD input
R
YPbPr
Monitor
Audio
out
FM ANT
75
AV1
in
out
To enable you to access PC mode in the TV, you must connect the following :
– Connect adaptor from DC in to the mains.
– Connect the PC input (VGA) to the Monitor Output of your PC
– Connect Audio L and R output of your PC to the Audio IN L and R of your LCD TV.
CONNECTING THE HD (HIGH DEFINITION) EQUIPMENT
Rear of TV
Pb
Pr
Y
L
R
in
Audio in
Video in
DC in PC input (VGA)
Audio in (PC / HD)
L
HD input
R
YPbPr
Monitor
Audio
out
75
out
VIDEO
INPUT
AV1
AV1
in
COMP
FM ANT
AUDIO VIDEO
OUTPUT
Back of DVD player
▲
OR
▼
OUTPUT
HDTV Set-Top Box
15PF9936/69 p7-13 4/7/03, 12:55 PM10
DVD (Equipped
with "Y", "Pb" and "Pr"
and Output sockets)
– Connect the “Y”, “Pb and the “Pr” sockets of the
HD INPUT at the rear of the LCD TV to the
“Y”, “Pb” and “Pr” OUTPUT sockets of the
DVD player.
– Connect Audio L and R OUTPUT of your
Set-top box to the Audio IN L and R of HD
INPUT of the LCD TV.
10
FUNCTIONS OF REMOTE CONTROL
& POWER button
– Switch set off to standby mode. To switch on set from
standby mode, press Channel +/– , Digit (0 -9) or Power
button.
é MODE button/VCR and DVD indicators
Press the Mode button repeatedly to choose between VCR
or DVD mode. The VCR or DVD indicator will light up if
selected. Once VCR or DVD mode is selected, it allows you
access to the Record, Play, Stop, Pause, Forward and Rewind
functions for your VCR or DVD player. Note : The set will
switch to TV mode if there is no activity on any of the
VCR/DVD buttons after 20 seconds.
“ VCR/DVD buttons
VCR/DVD buttons allows you access to the Record, Play, Stop,
Pause, Forward and Rewind functions for your VCR or DVD
player (Applicable to only certain models of PHILIPS). For
these functions to be enabled, you must select VCR or DVD
mode by the MODE button.
‘ SLEEPTIMER button
It allows you to select a time period after which the set will
switch to standby mode automatically. (Refer to section on
“Activating the Sleeptimer”
44
(
4 button
44
Allows you to switch from Stereo to Mono sound during
stereo transmission or to choose between language5or
language6during dual sound transmission.
§ SMART SOUND button
Press the Smart Sound button repeatedly to access 4 different
types of sound settings and choose your desired setting.
è MENU button
Displays the main menu. Also exits menu from screen.
! CURSOR LEFT/UP button
– Cursor Left button allows you to select the sub-menus and adjust the settings.
– Cursor Up button allows you to select the next item on the menu.
ç VOLUME + / – button
Increases or decreases volume.
0 TV button
When you are in PC, HD or FM Radio mode, press this button to enter into TV mode.
1 PC button
When you are in TV, HD or FM Radio mode, press this button to enter into PC mode.
2 INDEX/OSD button
– When in teletext mode, it functions as an Main Index button (Refer to section on
“Using the Teletext).
– When in TV mode, press to exit on-screen menu. Also displays information like
current channel number, sound mode, etc..
3 FORMAT / TIMER (VCR) button
In TV mode, it allows to select your desired screen format. Refer to section on (“Using
the Screen Format”). Also allows you timer function in VCR mode.
&
é
“
‘
(
§
è
!
ç
0
1
2
3
VCR
DVD
SMART
MENU
V
OK
PC TV HD
123
4
MODE A/CH
æ
X
ACTIVE
CONTROL
MUTE
7
i
2
v
o
g
b
SMART
k
¬
CH
RADIO
6
5
8
9
q
0
15PF9936/69 p7-13 8/21/03, 3:29 PM11
11
FUNCTIONS OF REMOTE CONTROL
4 AV / TELETEXT button
– In TV mode, it allows you to select the AV channels.
– In Teletext mode, it allows to access teletext information.
(Refer to section on “Using the Teletext”)
5 PICTURE-IN-PICTURE ON/OFF button
– When in PC mode, it allows you to call up a sub-screen
within your main screen enabling you to watch a TV channel.
4
5
6
SMART
VCR
DVD
6 PICTURE-IN-PICTURE POSITION button
– When in PC mode, it allows you to position the sub-screen
MENU
to be on the top left, top right, bottom right or the bottom
left corner of your screen.
7 ALTERNA TE CHANNEL button
Allows to alternate between the current channel and the
previous channel.
8 TELETEXT / HOLD button
– In teletext mode, it allows you to access teletext
information (Refer to section on “Using the Teletext”) .
– In VCR or DVD mode, it serves as a pause function for
your VCR or DVD player.
91TELETEXT button
25
V
OK
PC TV HD
123
4
7
i
Allows to access teletext mode.
20
1 SMART PICTURE button
Press the Smart Picture button repeatedly to access 5
different types of picture settings and choose your desired
setting.
ACTIVE CONTROL button
21
Adjusts settings automatically for optimal picture quality under any
signal conditions (Refer to section on “Using the Active Control”)
SURROUND SOUND button
22
– Allows you to select Incredible Surround, and Stereo sound when transmission is in
stereo mode.
– Allows you to select Spatial Sound or Mono sound when transmission is in mono mode.
CURSOR RIGHT / DOWN buttons
23
– Cursor Right button allows you to access the sub-menus adjust the settings.
– Cursor Down button allows you to select the next item on the menu.
CHANNEL + / – buttons
24
Allows you to select channels in ascending or descending order.
MUTE button
25
Mutes sound. To restore sound, press button again.
RADIO button
26
Allows to access radio mode. (Refer to section on “Accessing the FM Radio Installation
Menu ”)
HD (High Definition) button
27
Allows you to select the High definition mode when the “Y”, “Pb and the “Pr” sockets
at the HD INPUT at the rear of the LCDTV are connected to the to the “Y”, “Pb” and
“Pr” OUTPUT sockets of the DVD player.
DIGIT (0 -9) buttons
28
Allows you select a channel. Note : For a 2-digit number, the second digit must be
entered before the “–” sign disappears.
2
MODE A/CH
v
æ
o
g
X
SMART
ACTIVE
CONTROL
MUTE
¬
5
8
q
0
b
k
CH
RADIO
6
9
7
8
9
20
21
22
23
24
26
27
28
15PF9936/69 p7-13 5/6/03, 1:03 PM12
12
FUNCTIONS OF TV TOP CONTROLS
&é“
➩
& Mains Power button Switch mains power on or off.
é Volume
“ Channel
‘ Remote Sensor Acts as a sensor for activating the controls of the
Note
• You can enter the main menu by pressing both the Volume- and+buttons at the
same time.
• Press the Channel + or – button to select the next item on the menu.
• Press Volume
15PF9936/69 p7-13 4/7/03, 12:56 PM13
– / + buttons Adjust sound volume softer/louder.
– / + buttons Select channel in descending/ascending order.
+ or – button to access sub-menu and adjust the settings.
‘
TV when remote control handset is aimed at it.
13
ACCESSING THE TV MAIN MENU AND SUB-MENUS
The TV main menu allows you to access to the Picture, Sound, Features and Install menus
How to call up the main menu
Press the
The 4 buttons
Up, Down, Left and Right) on the remote control allow
you to select the desired menu item, make adjustments
and access the sub-menus. Use the
MENU
(MENU) button to enter the main menu.
, , and (Cursor
i
(OSD) button to
• PICTURE LANGUAGE
• SOUND AUTO STORE
• FEATURES MANUAL STORE
▲
É
• INSTALL SORT
CHANNEL EDIT
exit menu from screen.
OVERVIEW OF TV MAIN MENU AND SUB-MENUS
First Level Second Level Third Level Fourth Level
PICTURE Brightness
SOUND Equalizer 120Hz
Colour
Contrast
Sharpness
Colour Temperature Cool
Normal
Warm
Incredible Picture
500Hz
....... etc.
Balance
AVL
Incredible Surround
FEATURES Timer Time
Mode Select FM Radio
Child Lock
Widescreen
15PF9936/69 p14-18 8/15/03, 1:34 PM14
Start Time
Stop Time
Channel
Activate
Display
HD
PC
14
......... OVERVIEW OF TV MAIN MENU AND SUB-MENUS
First Level Second Level Third Level Fourth Level
INSTALL Language English
B. Melayu
Auto Store Search
Manual Store Colour System Auto
Sound System Auto
Search
Channel
Store
Fine Tune
Sort From
To
Exchange
Channel Edit Skipped
Name Personal
PAL
.... etc
B/G
.... etc
15PF9936/69 p14-18 4/7/03, 12:58 PM15
15
OVERVIEW OF FM RADIO MAIN MENU AND SUB-MENUS
This TV also provides you with the FM RADIO for your listening pleasure. To enable you to
access the FM RADIO mode, you must connect the cable from FM Rntenna socket to the
FM Radio mains. Press
Here is an overview of the FM RADIO Main menu and Sub-menus
First Level Second Level Third Level Fourth Level
RADIO
(FM RADIO) button to enter into FM Radio mode.
SOUND Equalizer 120HZ
Balance
AVL
Incredible Surround
FEATURES Timer Time
Mode Select TV
Screensaver
INSTALL Language English
Auto Store Search
Manual Store Search
500HZ
....... etc.
Start Time
Stop Time
Channel
Activate
Display
HD
PC
B. Melayu
Channel
Store
Sort From
Name Personal
15PF9936/69 p14-18 4/7/03, 12:58 PM16
To
Exchange
16
OVERVIEW OF PC MENU AND SUB-MENUS
This TV also allows you use your TV as a PC monitor. To enable you to access PC mode in the
TV, you must connect the following :–
& Connect DC input terminal to the AC adaptor.
é Connect the Mains Plug from the AC adaptor to the AC outlet.
“ Connect the PC input (VGA) to the Monitor Output of your PC.
‘ Connect Audio L and R output of your PC to the Audio in (PC) L and R of your TV.
( Press
§ Press
First Level Second Level Third Level Fourth Level
AUDIO SELECTION PC
BRIGHTNESS & Brightness
CONTRAST Contrast
ADJUST COLOR Color Temp Normal
VIDEO NOISE Phase
PC
button to enter into PC mode.
MENU
button to enter into the PC Main Controls Menu.
TV/Source/FM Radio
Warm
Cool
Personal Red
Clock
Green
Blue
ADJUST POSITION Horizontal
AUTO ADJUST Save Yes
PIP CONTROLS PIP Switch Off
MODE SELECT TV Mode
RESET TO FACTORY No
SETTINGS Yes
VIEW FORMATS Native
15PF9936/69 p14-18 8/15/03, 1:35 PM17
Vertical
No
On Size
Position
FM Radio Mode
HD Mode
Wide Screen
17
OVERVIEW OF HD MENU AND SUB-MENUS
The HD (High Definition) mode offers you Picture and Sound adjustments, Mode Select and
Lock Channel feature.
First Level Second Level Third Level Fourth Level
PICTURE Brightness
SOUND Equalizer 120Hz
MODE TV Mode
SELECT FM Radio Mode
LOCK
CHANNEL
Color
Contrast
Sharpness
Hue
Color Temperature Cool
Normal
Warm
Format Full Screen
Wide Screen
500Hz
....... etc.
Balance
AVL
PC Mode
15PF9936/69 p14-18 8/15/03, 1:35 PM18
18
ACCESSING THE LCD TV INSTALLATION MENU
Before you access the TV installation menu, ensure you are in TV mode. If you are not in TV
mode, press the
TV
(TV) button on the remote control to enter into TV mode.
INSTALL
MENU
k
MENU
k
MENU
Ñ
k
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
▲
É
▼
1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
CHOOSING THE MENU LANGUAGE AND
AUTOMATIC TUNING OF LCD TV CHANNELS
The Language menu allows you to set the TV’s on-screen menu to be shown in your desired
language.
Press Button
4. Enter LANGUAGE mode.
or 5. Select desired language.
6 Exit LANGUAGE mode.
7. Select AUT O ST ORE.
Result on Screen
INSTALL
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
INSTALL
• LANGUAGE
Ñ
AUTO STORE • SEARCH
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
▲
É
▼
▲
É
▼
8. Start automatic tuning.
i
9. When automatic tuning of channels
is completed, exit menu from screen.
15PF9936/69 p19-26 4/7/03, 12:59 PM19
19
INSTALL
Ñ
• LANGUAGE
• AUTO STORE • SEARCHING
Ñ
MANUAL STORE PLEASE WAIT
• SORT CHANNEL FOUND 8
▲
É
• CHANNEL EDIT 048.31 MHZ
▼
ACCESSING THE LCD TV INSTALLATION MENU
MANUAL TUNING OF LCD TV CHANNELS
Manual tuning allows you to store each programmes manually.
INSTALL
MENU
k
MENU
k
MENU
Ñ
k
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
Press Button
4. Press button repeatedly until
MANUAL STORE is selected.
5. Enter MANUAL STORE menu.
6. Select SEARCH.
7. Start manual tuning. Searching stops
once a transmitting channel is found.
Result on Screen
INSTALL
MANUAL STORE
• COLOUR SYSTEM •
• SOUND SYSTEM
Ñ
• CHANNEL
• STORE
INSTALL
MANUAL STORE
• COLOUR SYSTEM •
• SOUND SYSTEM
Ñ
• CHANNEL
• STORE
▲
É
▼
▲
SEARCH • 196.23MHZ
SEARCH • 196.23MHZ
É
▼
▲
É
▼
8. Select CHANNEL.
123
6
5
4
789
0
9. Key in the desired channel number.
10. Select STORE.
11. Store tuned channel.
i
15PF9936/69 p19-26 4/7/03, 12:59 PM20
12. Exit menu from screen.
20
INSTALL
MANUAL STORE
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
Ñ
CHANNEL • 18 •
• STORE
INSTALL
MANUAL STORE
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
• CHANNEL
STORE • STORED
Ñ
▲
É
▼
▲
▼
É
A CCESSING THE LCD TV INSTALLATION MENU
SELECTING THE COLOUR/SOUND SYSTEM
This feature allows you to select your desired COLOUR and SOUND system. If AUTO
is selected, the respective colour and sound system will be automatically selected according
to the transmission system. Note : Select your desired colour and sound system manually if
reception is poor at AUTO mode. If the colour system is selected manually, that is, AUTO
is not selected, the sound system selected should also not be AU TO and vice versa.
Press Button
Result on Screen
Repeat step 1 to step 5 as in “MANUAL TUNING OF CHANNELS”
6. COLOUR SYSTEM is selected.
Enter COLOUR SYSTEM mode.
or 7. Select the desired colour system.
8. Exit from colour system mode.
9. Proceed to select the SOUND
SYSTEM.
10. Enter SOUND SYSTEM mode.
or 11. Select the desired sound system.
12. Exit from sound system mode.
13. Press button repeatedly until
STORE is selected.
14. Store selected system.
INSTALL
MANUAL STORE
Ñ
COLOUR SYSTEM • AUTO
• • SOUND SYSTEM PAL
• SEARCH SECAM
• CHANNEL
• STORE
INSTALL
MANUAL STORE
• COLOUR SYSTEM
Ñ
SOUND SYSTEM • AUTO
• SEARCH B/G
• CHANNEL B/K
• STORE
INSTALL
MANUAL STORE
• COLOUR SYSTEM
Ñ
SOUND SYSTEM • AUTO
• SEARCH B/G
• CHANNEL D/K
• STORE
INSTALL
MANUAL STORE
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
• CHANNEL
STORE •
Ñ
INSTALL
MANUAL STORE
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
• CHANNEL
STORE • STORED
Ñ
▲
É
▼
▲
▼
▲
É
▼
▲
É
▼
▲
É
▼
i
15PF9936/69 p19-26 8/15/03, 1:37 PM21
15. Exit menu from screen.
21
A CCESSING THE LCD TV INSTALLATION MENU
FINE TUNING OF LCD TV CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
INSTALL
MENU
k
MENU
k
MENU
Ñ
k
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
1. Enter main menu. 2. Select INSTALL.3.Enter Install menu.
Press Button
4. Press button repeatedly until
MANUAL STORE is selected.
Result on Screen
INSTALL
MANUAL STORE
5. Enter MANUAL STORE menu.
or 7. Start fine-tuning until desired
6. Press button repeatedly until
FINE TUNE is selected.
INSTALL
MANUAL STORE
picture and sound is obtained.
▲
É
▼
▲
Ñ
COLOUR SYSTEM • AUTO •
• SOUND SYSTEM PAL
• SEARCH SECAM
• CHANNEL
• STORE
• SOUND SYSTEM
• SEARCH
• CHANNEL
• STORE
FINE TUNE
Ñ
É
▼
▲
▼
É
8. Select Store.
9. Store last fine-tuned status.
i
15PF9936/69 p19-26 8/15/03, 1:37 PM22
10. Exit menu from screen.
22
INSTALL
MANUAL STORE
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
• CHANNEL
STORE • STORED
Ñ
▲
▼
É
ACCESSING THE LCD TV INSTALLATION MENU
SORTING OF LCD TV CHANNELS
This menu allows you to change channel number of your choice for a particular station.
INSTALL
MENU
k
MENU
k
MENU
Ñ
k
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
Press Button
123
6
5
4
789
0
4. Press button repeatedly until
SORT is selected.
5. Enter SORT menu.
6. Key in the channel number in the
Result on Screen
INSTALL
• LANGUAGE FROM
• AUTO STORE TO
• MANUAL STORE EXCHANGE
▲
É
• SORT
▼
• CHANNEL EDIT
INSTALL
FROM column, that is the channel
you want to swap from.
123
4
789
7. Select TO.
6
5
0
8. Key in the channel number in the
INSTALL
TO column, that is, the channel
you want to swap to.
▲
É
▼
SORT
Ñ
FROM • 8
• TO
▲
• EXCHANGE
▼
SORT
• FROM
Ñ
TO • 6
▲
• EXCHANGE
▼
É
É
9. Select EXCHANGE.
10. Activate exchange of channels.
i
15PF9936/69 p19-26 4/7/03, 12:59 PM23
11. Exit menu from screen.
23
INSTALL
SORT
• FROM
• TO
EXCHANGE • EXCHANGED
Ñ
▲
É
▼
ACCESSING THE LCD TV INSTALLATION MENU
EDITING OF LCD TV CHANNELS
This feature allows you to edit or skip channels which have bad or weak TV signal or channels
that you do not watch often.
Note : Once a channel is skipped, you cannot have access to it by the CHANNEL
button. You can only access the channel by the DIGIT (0 -9) button.
+
or –
INSTALL
MENU
k
MENU
k
MENU
Ñ
k
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
1. Enter main menu. 2. Select INSTALL. 3. Enter Install menu.
Press Button
4. Press button repeatedly until
CHANNEL EDIT is selected.
5. Enter channel edit mode.
or 6. Select the channel you want to skip.
7. Activate skipped mode.
i
8. Exit menu from screen.
Result on Screen
INSTALL
• LANGUAGE 3
• AUTO STORE 4
• MANUAL STORE 5
• SORT 6
Ñ É
INSTALL
• LANGUAGE 3
• AUTO STORE 4
• MANUAL STORE 5
• SORT 6
Ñ É
INSTALL
• LANGUAGE 3
• AUTO STORE 4
• MANUAL STORE 5
• SORT 6
Ñ É
CHANNEL EDIT • 7 SKIPPED
▲
É
▼
CHANNEL EDIT • 7
CHANNEL EDIT • 7
How to add back channels
• Repeat steps 1 to 5 as in “Editing of Channels”.
• Select the channel you want to add back by the
(CURSOR DOWN) button.
• Press the
• Exit menu from screen by the
15PF9936/69 p19-26 4/7/03, 12:59 PM24
(CURSOR RIGHT) button to activate adding back of channel.
i
(OSD) button.
(CURSOR UP) or
24
A CCESSING THE LCD TV INSTALLATION MENU
NAMING OF LCD TV CHANNELS
This feature allows you to enter a new name or modify an existing name of a channel for 40
programmes (from 1 to 40) including external channels.
MENU
k
MENU
k
MENU
k
INSTALL
Ñ
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• CHANNEL EDIT
•
1. Enter main menu. 2. Select INSTALL.3.Enter Install menu.
Press Button
4. Press button repeatedly until
NAME is highlighted.
Result on Screen
INSTALL
• AUTO STORE
• MANUAL STORE
• SORT
• CHANNEL EDIT
Ñ
5. Enter NAME mode.
or 6. Select desired preset name and
press
(CURSOR RIGHT)
button to store selected pre-set
name.
7. If you select PERSONAL, m o ve
to first character slot
INSTALL
• AUTO STORE
• MANUAL STORE
• SORT
• CHANNEL EDIT
Ñ
INSTALL
• AUTO STORE
• MANUAL STORE
• SORT
• CHANNEL EDIT
Ñ
or 8. Press button repeatedly to cycle
through the characters and select
desired character. Move to next
character slot by the
(CURSOR RIGHT) button
INSTALL
• AUTO STORE
• MANUAL STORE
• SORT
• CHANNEL EDIT
Ñ
and key in the next character.
(You can enter up to a maximum
of 5 characters)
MENU
i
9. Store named channel.
10. Exit menu from screen.
INSTALL
• AUTO STORE
• MANUAL STORE
• SORT
• CHANNEL EDIT
Ñ
NAME
NAME
NAME
NAME
NAME
▲
É
▼
▲
▲
É
• 8
▲
▲
É
• PERSONAL
▲
É
• _
▼
▲
É
• BBC_1
▼
▲
▲
É
• PERSONAL
15PF9936/69 p19-26 8/15/03, 1:38 PM25
25
USING THE LCD TV PICTURE/SOUND MENU
The picture and sound menus allow you to make adjustments to the picture and sound. It also
allow you to select and activate other features in the menu.
1. Press the
2. Use the
PICTURE/SOUND menu.
3. Use the
MENU
(MENU) button to enter main menu.
(CURSOR UP/DOWN) buttons to select the items on the
(CURSOR LEFT/RIGHT) buttons to access the sub-menus.
Picture Activities
menu items
Brightness Increase or decrease brightness level.
Colour Increase or decrease color level.
Contrast Increase or decrease contrast level until
lightest parts of the picture show good
detail.
Sharpness Increase or decrease sharpness level to
Colour Temp Allows you a choice of 3 picture settings
improve detail in the picture.
(NORMAL, WARM and COOL).
Incredible Select “ON” to allow you to optimise the
Picture total contrast for improved picture quality.
Sound Activities
menu items
Equalizer Allows you a choice of different sound
frequencies.
BALANCE Increase or decrease to adjust balance
level.
AVL As variation in signal conditions can result
(Auto Volume a sudden change in volume during in
Leveller) commercial breaks or channel switching,
selecting the “ON” function will enable
the volume to remain at a standard
volume level.
PICTURE
Ñ
BRIGHTNESS 38
• COLOUR
• CONTRAST
• SHARPNESS
• COLOUR TEMP
•
PICTURE
• COLOUR
• CONTRAST
• SHARPNESS
• COLOUR TEMP COLOUR
Ñ
INCR.PICTURE
•
Note : HUE feature is only
applicable to NTSC
▲
É
É
•
ON
programmes. The HUE item
will not appear on the menu if
programme is in PAL mode.
SOUND
▲
É
• EQUALIZER 120HZ
▼
• BALANCE 500HZ
• AVL 1500HZ
• INCR.SURROUND 5KHZ
• 10KHZ
Incredible Allows you to select between Stereo,
Surround Dolby Virtual and Incredible Surround
sound. when transmission is in stereo.
Allows you to select between Spatial and
Mono sound when transmission is in
mono.
15PF9936/69 p19-26 8/15/03, 1:38 PM26
26
ACCESSING THE LCD TV FEATURES MENU
ACTIVA TING THE TIMER
The Timer feature allows you to set the timer to switch to another channel at a specified
time while you are watching another channel or when the TV is on standby mode.
Note : For the timer to function, the set must not be switched off. Once the set is switched
off, the timer is disabled.
MENU
k
MENU
k
MENU
k
FEATURES
▲
É
• TIMER TIME
▼
•
MODE SELECT
•
CHILD LOCK
•
FORMAT
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
123
6
5
4
789
0
MENU
123
6
5
4
789
0
MENU
4. Enter the TIMER menu.
5. Enter TIME mode.
6. Key in the current time For example, if
the current time is 12:30, key digit 1 and
2 in the hour column, followed by digit
3 and 0 in the minute column.
7. Exit from TIME mode.
8. Select START TIME.
9. Enter the START TIME mode.
10. Key in the time you want the
programme to be switched on.
11. Exit from START TIME mode.
12 Select STOP TIME.
Result on TV Screen
FEATURES
TIMER
Ñ
TIME • --:--
• START TIME
• STOP TIME
• CHANNEL.
• ACTIVATE
FEATURES
TIMER
Ñ
TIME • 12:30
• START TIME
• STOP TIME
• CHANNEL
• ACTIVATE
FEATURES
TIMER
• TIME
START TIME • --:--
Ñ
• STOP TIME
• CHANNEL
• ACTIVATE
FEATURES
TIMER
TIME
Ñ
• START TIME • 13:30
• STOP TIME
• CHANNEL
• ACTIVATE
FEATURES
TIMER
• TIME
• START TIME
Ñ
STOP TIME • --:--
• CHANNEL
• ACTIVATE
START TIME
STOP TIME
CHANNEL
ACTIVATE
▲
É
▲
É
▼
▲
É
▲
É
▼
▲
É
15PF9936/69 p27-38 4/7/03, 1:00 PM27
27
ACCESSING THE LCD TV FEATURES MENU
......... ACTIV ATING THE TIMER
Press Button
123
6
5
4
789
0
MENU
123
6
5
4
789
0
13. Enter STOP TIME mode.
14. Key in the time you want the
programme to be switched off.
15. Exit from STOP TIME mode.
16. Select CHANNEL.
17. Key in the channel you want to
switch to.
18. Select ACTIVATE.
19. Activate timer. You can select
to activate timer by DAILY or
ONCE mode.
20. Select DISPLAY.
21 Select ON mode if you want to
display the current time on the
TV screen.
Result on TV Screen
FEATURES
TIMER
• TIME
• START TIME
Ñ
STOP TIME • 15:30
• CHANNEL
• ACTIVATE
FEATURES
TIMER
• TIME
• START TIMEE
• STOP TIME
Ñ
CHANNEL • 3
• ACTIVATE
FEATURES
TIMER
• TIME
• START TIMEE
• STOP TIME
Ñ
CHANNEL • 8
• ACTIVATE
FEATURES
TIMER
• TIME
• START TIMEE
• STOP TIME
• PROG. NO
Ñ
ACTIVATE • ONCE
FEATURES
TIMER
• START TIME
• STOP TIMEE
• CHANNEL
• ACTIVATE
Ñ
DISPLAY • ON
É
▲
É
▼
▼
▲
É
▼
▼
▲
É
▲
É
▲
▼
i
22. Exit menu from screen.
Note
30 seconds before the timer is activated, a message indicating the time left for the channel
switch will appear on the screen. To disable the channel switch, press any button on the
remote control.
28
15PF9936/69 p27-38 4/7/03, 1:01 PM28
ACCESSING THE LCD TV FEATURES MENU
USING THE MODE SELECT
This menu allows you to go into FM RADIO, HD or PC mode.
MENU
k
MENU
k
MENU
k
FEATURES
▲
É
•
TIMER TIME
▼
•
MODE SELECT
•
CHILD LOCK
•
WIDE SCREEN
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
4. Select MODE SELECT.
5.Enter MODE SELECT menu.
or 6. Select your desired mode.
Result on TV Screen
FEATURES
•
TIMER
Ñ
MODE SELECT•FM RADIO
•
CHILD LOCK HD
•
WIDE SCREEN
FEATURES
MODE SELECT
Ñ
FM RADIO
•
HD
•
PC
7. Enter selected mode.
START TIME
STOP TIME
CHANNEL
ACTIVATE
▲
▲
É
PC
▼
Note : You can also access directly the FM RADIO. HD and PC modes by the
PC
buttons.
29
15PF9936/69 p27-38 8/15/03, 1:45 PM29
RADIO
HD
and
ACCESSING THE LCD TV FEATURES MENU
ACTIVATING THE CHILD LOCK (ACCESS CODE)
The Child Lock feature allows you to lock channels on your TV Top Controls to prevent your
children from watchingprogrammes you deem undesirable.
Note : You cannot have access to the locked channels via the top controls of the TV set once
the channels are locked. You can only have access to the locked channels via the remote
control. Keep the remote control out of reach so as to prevent your children from having
access to it.
MENU
k
MENU
MENU
k
k
FEATURES
▲
É
• TIMER TIME
▼
•
MODE SELECT
•
CHILD LOCK
•
FORMAT
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on TV Screen
4. Select CHILD LOCK.
FEATURES
• TIMER ACCESS CODE
• MODE SELECT --:--
▲
É
• CHILD LOCK
▼
• FORMAT
FEATURES
• TIMER ACCESS CODE
•
MODE SELECT
Ñ
CHILD LOCK INCORRECT
• FORMAT
FEATURES
• TIMER ACCESS CODE
• MODE SELECT
Ñ
CHILD LOCK CORRECT
• FORMAT
123
5
4
789
0
123
5
4
789
0
5. Enter ACCESS CODE mode.
6. Key in access code 0711
6
(0711 is the default access code).
A message INCORRECT will
appear.
7. Key in 0711 the second time.
6
When the message CORRECT
appears, the CHILD LOCK
menu is now accessible.
FEATURES
CHILD LOCK
Ñ
LOCK CHANNEL • 2
• CHANGE CODE 3
You can now proceed to change
• CLEAR ALL 4
the access code of your choice.
START TIME
STOP TIME
CHANNEL
ACTIVATE
X X X X
X X X X
▲
É
5
6
15PF9936/69 p27-38 4/7/03, 1:01 PM30
30
ACCESSING THE LCD TV FEATURES MENU
ACTIVA TING THE CHILD LOCK (CHANGE CODE)
Press Button
123
6
5
4
789
0
123
6
5
4
789
0
8. Select CHANGE CODE.
9. Enter CHANGE CODE mode.
10. Key in the access code of your
choice.
11. Confirm access code.
When the new code is confirmed,
the message CORRECT will
appear.
Result on TV Screen
FEATURES
CHILD LOCK
• LOCK CHANNEL ENTER
Ñ
CHANGE CODE NEW CODE
• CLEAR ALL
FEATURES
CHILD LOCK
• LOCK CHANNEL ENTER
Ñ
CHANGE CODE NEW CODE
• CLEAR ALL
FEATURES
CHILD LOCK
• LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE CODE
• CLEAR ALL
FEATURES
CHILD LOCK
• LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE CODE
• CLEAR ALL
– – – –
x x x x
x x x x
x x x x
CORRECT
i
12. Exit menu from screen.
Note : After you have exit menu from screen and you want to enter child lock menu again ,
you need to key the new access code only once. If you have forgotten the new access code,
key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can
proceed to change code again.
31
15PF9936/69 p27-38 4/7/03, 1:01 PM31
ACCESSING THE LCD TV FEATURES MENU
ACTIVA TING THE CHILD LOCK (LOCK CHANNEL)
MENU
k
MENU
k
MENU
k
FEATURES
▲
É
• TIMER TIME
▼
•
MODE SELECT
•
CHILD LOCK
•
FORMAT
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
4. Select CHILD LOCK .
5. Enter ACCESS CODE mode.
6. Key in access code .
7. Enter LOCK CHANNEL mode.
or 8. Select the channel you want to block.
9. Activate blocking of channel. A
keylock symbol will appear beside
Result on TV Screen
FEATURES
• TIMER ACCESS CODE
• MODE SELECT --:--
▲
É
• CHILD LOCK
▼
• FORMAT
FEATURES
• TIMER ACCESS CODE
• MODE SELECT
• CHILD LOCK CORRECT
Ñ
FORMAT
FEATURES
CHILD LOCK
Ñ
LOCK CHANNEL • 2
• CHANGE CODE 3
• CLEAR ALL
FEATURES
CHILD LOCK
Ñ
LOCK CHANNEL • 3
• CHANGE CODE 4
• CLEAR ALL
the channel number indicating that
it is locked.
i
10. Exit menu from screen.
START TIME
STOP TIME
CHANNEL
ACTIVATE
X X X X
É
4
5
6
É
FF
F
FF
5
6
7
Note : You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control.
When AV1 source is locked, CV1 source is automatically locked. Like-wise, if CV1 source is
locked, AV1 source is also automatically locked as they share the same audio input.
If you attempt to enter the INSTALL menu after locking a channel, a message
“Enter ACCESS CODE” will appear on the screen. You need to enter the ACCESS
CODE to enable you to enter the INSTALL menu.
32
15PF9936/69 p27-38 4/7/03, 1:01 PM32
ACCESSING THE LCD TV FEATURES MENU
ACTIVA TING THE CHILD LOCK (CLEAR ALL)
To unlock channels that you have locked, enter the Child Lock menu and activate the
CLEAR ALL mode.
MENU
k
MENU
MENU
k
k
FEATURES
▲
É
• TIMER TIME
▼
•
MODE SELECT
•
CHILD LOCK
•
FORMAT
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
4. Select CHILD LOCK.
5. Enter ACCESS CODE mode.
6. Key in access code.
7. Press button repeatedly until
CLEAR ALL is selected.
Result on TV Screen
FEATURES
• TIMER ACCESS CODE
• MODE SELECT --:--
▲
É
• CHILD LOCK
▼
• FORMAT
FEATURES
• TIMER ACCESS CODE
• MODE SELECT
• CHILD LOCK CORRECT
Ñ
FORMAT
FEATURES
CHILD LOCK
• LOCK CHANNEL
• CHANGE CODE
Ñ
CLEAR ALL •
START TIME
STOP TIME
CHANNEL
ACTIVATE
X X X X
▲
É
8. Activate clearing of all locked
channels.
i
9. Exit menu from screen.
FEATURES
CHILD LOCK
• LOCK CHANNEL
• CHANGE CODE
Ñ
CLEAR ALL • CLEARED
Note
You can also unlock individual channel by the LOCK CHANNEL menu
• Repeat step 1 to 7 as in “ACTIVATING THE CHILD LOCK (LOCK CHANNEL)”.
• Select the channel you want to unlock by the or (CURSOR UP / DOWN)
buttons.
• Press the
(CURSOR RIGHT) button to unlock channel (the keylock symbol will
disappear).
33
15PF9936/69 p27-38 4/7/03, 1:01 PM33
▲
É
USING THE SCREEN FORMAT
You can have a choice of different formats for your viewing pleasure, namely : - 4:3 mode,
EXPAND 4:3 mode and COMPRESS 16:9 mode through the FORMAT menu.
How to access the Screen Format
1. Press the
and press the
repeatedly until FEATURES is selected.
2. Press the
enter FEATURES menu.
3. Press the
repeatedly until FORMAT is selected.
4. Press the (CURSOR RIGHT) button
repeatedly to cycle through the different formats
(4:3, Expand 4:3 or Compress 16:9) and
select your desired format.
Note : You can also select your desired Screen Format directly by the
MENU
(MENU) button to enter main menu
(CURSOR DOWN) button
(CURSOR RIGHT) button to
(CURSOR DOWN) button
FEATURES
▲
É
• TIMER TIME
▼
•
MODE SELECT
•
CHILD LOCK
•
FORMAT
FEATURES
• TIMER
•
MODE SELECT
•
CHILD LOCK
Ñ
FORMAT
FEATURES
• TIMER
• MODE SELECT
• CHILD LOCK
Ñ
FORMAT • EXPAND 4:3
æ
START TIME
STOP TIME
CHANNEL
ACTIVATE
É
•
4:3
É
(FORMAT) button
When to use the Screen Formats
4:3 format
Select the 4:3 format if you want to display
the 4:3 picture using the full surface of the
screen.
EXPAND 4:3 format
Select the EXPAND 4:3 format if you want
to expand movie images recorded in the
letterbox format. When this format is
selected, the black horizontal bars at the
top and bottom are expanded thus filling
up the entire TV screen.
COMPRESS 16:9 format
Select the COMPRESS 16:9 format if you
want to compress full screen movie images
into letterbox format. When this format is
selected, black horizontal bars can be seen
at the top and bottom of the TV screen.
15PF9936/69 p27-38 5/5/03, 2:09 PM34
34
➩
➩
➠
➩
➩
➠
➩
ACTIVATING THE SLEEPTIMER
Sleeptimer function allows you to select a time period in which the set will switch to standby
mode automatically upon reaching the selected time period. You have a choice of time period
starting from OFF up to a maximum of 240 minutes
1. Press the
(SLEEPTIMER) button to display the
time period.
2. Press the
(SLEEPTIMER) button repeatedly to
SLEEP OFF
cycle through the various time periods and select the
time period of your choice.
➠
Note
• During the last minute of a Sleep time setting, an
on-screen countdown will be displayed. Pressing any
button on the remote control during the countdown
will cancel the Sleep-timer.
SLEEP 240
• During the last 10 seconds of a Sleep timer setting,
an on-screen display will read Goodbye.
ACTIVATING THE ACTIVE CONTROL
This feature automatically adjust settings for optimal picture quality continuously under any
signal conditions. You have a choice of 4 modes : ACTIVE CONTROL OFF, ACTIVE
CONTROL MIN, ACTIVE CONTROL MED and ACTIVE CONTROL MAX
HOW TO ACCESS AND SELECT THE ACTIVE CONTROL MODE
1. Press the
repeatedly to cycle through the various four
ACTIVE CONTROL modes and select your
desired mode.
ACTIVE
(ACTIVE CONTROL) button
CONTROL
ACTIVE CTRL OFF
i
2. Press
(OSD) button to exit menu from screen
or wait for the On-Screen Display to time out.
15PF9936/69 p27-38 8/15/03, 1:47 PM35
ACTIVE CTRL MIN
➠
ACTIVE CTRL MAX
35
ACTIVATING THE LCD TV SMART PICTURE / SOUND CONTROL
SMART PICTURE feature offers you a choice of 5 picture settings, namely, RICH,
NATURAL, SOFT, PERSONAL and MULTIMEDIA.
SMART SOUND feature offers you a choice of 4 sound settings, namely, THEATRE,
MUSIC, VOICE and PERSONAL.
Press
SMART
(SMART PICTURE) or
SMART
(SMART SOUND) button repeatedly to cycle
through the settings to select your desired mode.
Definition of Picture Settings
PERSONAL : Picture settings are set to your
preference.
RICH : Emphasize very vibrant colours.
(Suitable for AV mode in
brightly-lit room)
NATURAL : Emphasize original colours.
SOFT : Emphasize “warm” colours.
(Suitable for dimly-lit room
condition and gives cinema-like
effect when light is switched off).
MULTIMEDIA : Emphasize “soft” colours. (Suitable
for playing computer games,
surfing, etc.)
Note : The PERSONAL setting is the setting that
you set up using the Picture menu in the main menu.
This is the only setting in the Smart Picture settings
that can be changed. All the other settings are
pre-set at the factory.
Definition of Sound Settings
PERSONAL : Sound settings are set to your
preference.
VOICE : Emphasize high tone. (Treble boosted)
MUSIC : Emphasize low tone. (Bass boosted)
THEATRE : Emphasize sensation to action.
(Bass and Treble boosted)
Note : The values shown in the Picture/Sound
Setting diagrams are sample values only. Your
television’s values may vary and display different
numbers.
BRIGHTNESS 48
COLOR 41
PICTURE 81
SHARPNESS 3
BRIGHTNESS 42
COLOR 30
PICTURE 50
SHARPNESS 3
BRIGHTNESS 43
COLOR 30
PICTURE 75
SHARPNESS 3
BRIGHTNESS 43
COLOR 27
PICTURE 79
SHARPNESS 3
BRIGHTNESS 45
COLOR 30
PICTURE 71
SHARPNESS 3
120HZ 20
500HZ 6
1500HZ 6
5KHZ 9
120HZ 5
10KHZ 15
500HZ 5
1500HZ 6
120HZ 20
5KHZ 5
500HZ 6
10KHZ 3
1500HZ 6
120HZ 26
5KHZ 9
500HZ 6
10KHZ 15
1500HZ 6
5KHZ 17
10KHZ 19
PERSONAL
RICH
NATURAL
SOFT
MULTIMEDIA
PERSONAL
VOICE
MUSIC
THEATRE
15PF9936/69 p27-38 8/15/03, 1:47 PM36
36
USING THE TELETEXT
b
If a TV channel broadcast contains teletext information, each channel that broadcasts
teletext transmits a page (index page) with information on how to use the teletext system,
usually on page 100. The system transmitted is indicated in the option line at the bottom
of the screen.
2
MODE A/CH
VCR
v
DVD
æ
o
g
b
X
SMART
ACTIVE
SMART
CONTROL
MENU
V
OK
PC TV HD
k
MUTE
¬
CH
RADIO
123
6
5
4
8
7
i
9
q
0
(
& On/Off teletext Press the button once to switch on
and teletext display. (A channel in which
Superimpose teletext is being transmitted must be
‘
&
teletext page selected).
over TV Press the button the second time
programme superimpose the teletext page over
the TV programme.
Press the button the third time
to exit teletext mode.
é Selecting a Key in the required teletext page
“
teletext page (3 digits). The page number is
displayed at the top left hand corner
of the screen. When the teletext
page is located, the counter stops
6
searching. If the counter keeps
searching, it means that the page is
not available for selection. If you
é
123
5
4
789
0
make a mistake in keying the page
number, you have to complete
keying the 3-digit number before
re-keying the correct page number.
“ Accessing Press the CHANNEL + button to
a teletext display the next page and the
page CHANNEL – button to
CH
display the previous page.
‘ Direct Access to The 4-colour buttons allow you to
an item or access directly an item or
corresponding corresponding pages.
pages
æ
o
( Main Index Press the button to return to the
main index page.
i
37
15PF9936/69 p27-38 4/7/03, 1:01 PM37
USING THE TELETEXT
§ Dual Page Not applicable.
Text
ç
X
è
è Hold If the page has sub-pages, use the
g
Cursor Right or Left button to
access the next or previous page
!
! Selecting a For a teletext page with sub-pages,
sub-page press the Cursor Left or Right
button to access the previous subpage or the next subpage.
§
!
MODE A/CH
VCR
DVD
æ
X
SMART
MENU
V
OK
PC TV HD
ACTIVE
CONTROL
MUTE
2
v
o
g
b
SMART
k
¬
CH
RADIO
123
4
8
7
i
9
q
0
ç Reveal/ Press the button once to reveal hidden
Conceal information (solutions to puzzles,
riddles, etc). Press the button the
v
second time to conceal information.
This button is applicable only to
6
5
teletext page with puzzles, riddles, etc.)
How to select your favourite page
This feature allows you select 4 of your favourite or most commonly viewed page and stored
them in the favourite page selection. You can then access directly your favourite page by the
colour buttons without having to key in the page number.
1. Press the
b
(TELEXTEXT ON/OFF) button to enter teletext mode.
2. Press the
MENU
(MENU) button to enter favourite page selection. Note : The colour
alphabets at the bottom of the screen is now changed to page numbers.
123
6
5
4
3. Key in your favourite page by the
4. Press the
i
(OSD) button followed by your desired colour button to store your favourite
789
(DIGIT 0 -9) buttons.
0
page.
5. Repeat step 3 to 4 to select and store other favourite pages.
6. To exit Favourite page mode, press
7. Press the
b
(TELEXTEXT ON/OFF) button twice to exit teletext mode.
MENU
(MENU) button.
38
15PF9936/69 p27-38 9/9/03, 2:52 PM38
ACCESSING THE FM RADIO INSTALLATION MENU
This TV also provides you with the FM RADIO for your listening pleasure. To enable you to
access the FM RADIO mode, you must connect the cable from FM Antenna socket to the
FM Radio mains.
Press Button
RADIO
MENU
1. Enter into FM Radio mode.
2. Enter FM RADIO main menu.
3. Press button button repeatedly
until INSTALL is highlighted.
4. Enter INSTALL menu.
or 5. Press button button repeatedly to
scroll through the available FM Mode
On-screen options. These options
include LANGUAGE, A UT O STORE,
MANUAL STORE, SORT and NAME.
LANGUAGE – Choose to view the
On-screen menu in your desired language.
AUTO STORE – Allows you to search
the FM antenna signal and store any FM
channel it finds in the TV’s memory.
MANUAL STORE – Allows you to
manually tune any available FM signals.
SORT– Allows you to rearrange your
stored FM stations in the order you
prefer.
NAME – Allows you to apply a name
to your programmed FM radio stations.
Add your own personal name or choose
one from the predefined list.
6. Adjust or select items within the
highlighted feature sub-menu.
Result on TV Screen
Ñ
É
• SOUND EQUALIZER
▼
• FEATURES BALANCE
• INSTALL AVL
• SOUND LANGUAGE
• FEATURES AUTO STORE
▲
É
• INSTALL MANUAL STORE
INSTALL
Ñ
Ñ
LANGUAGE • ENGLISH
• AUTO STORE B.MELAYU
• MANUAL STORE
• SORT
• NAME
•
INSTALL
• LANGUAGE
Ñ
AUTO STORE • SEARCH
• MANUAL STORE
• SORT
• NAME
•
INSTALL
• LANGUAGE SEARCH
• AUTO STORE CHANNEL
▲
É
• MANUAL STORE STORE
▼
• SORT
• NAME
INSTALL
• LANGUAGE FROM
• AUTO STORE TO
• MANUAL STORE EXCHANGE
▲
É
• SORT
▼
• NAME
INSTALL
• LANGUAGE
• AUTO STORE
• MANUAL STORE
• SORT
Ñ
NAME • PERSONAL
INCR.SURROUND
SORT
NAME
▲
É
▼
▲
É
▼
▲
É
i
15PF9936/69 p39-51 5/5/03, 2:13 PM39
7. Exit menu from screen.
39
USING THE FM RADIO SOUND MENU
The Sound menu allows you to make adjustments to the sound.
Note: Ensure you are in FM RADIO mode before you access FM RADIO main menu.
MENU
k
SOUND
▲
É
• EQUALIZER 120HZ
▼
• BALANCE 500HZ
• AVL 1500HZ
• INCR.SURROUND 5KHZ
• 10KHZ
1. Press
MENU
MENU
button to enter FM RADIO 2. Press button to enter the
k
main menu. SOUND option is SOUND menu.
highlighted.
3. In the SOUND menu, press or button to adjust level or select desired setting.
4. Use the
buttons to select the various SOUND menu items and
make your desired adjustments and access the sub-menus.
5. Press
i
button to exit menu from screen.
Sound menu items Activities
EQUALIZER Allows you a choice of different sound frequencies.
BALANCE Increase or decrease to adjust balance level.
AVL As variation in signal conditions can result a sudden
(Auto Volume change in volume during FM channel switching, selecting
Leveller) the “ON” function will enable the volume to remain at a
standard volume level.
INCREDIBLE Allows you to select between Incredible Surround
SURROUND Dolby Virtual or Stereo sound when transmission is in
stereo. Allows you to select between Spatial and Mono
sound when transmission is in mono.
USING THE FM RADIO SMART SOUND CONTROL
FM RADIO SMART SOUND feature offers you a choice of 5 sound settings, namely,
ROCK, POP, CLASSICAL, JAZZ, and PERSONAL.
1) Press the
2) Press
and select your desired sound mode.
3) Press the
15PF9936/69 p39-51 8/25/03, 5:30 PM40
RADIO
(FM RADIO) button to enter FM RADIO mode.
SMART
(SMART SOUND) button repeatedly to cycle through the various settings
i
(OSD) button to exit On-Screen display .
40
ACCESSING THE FM RADIO FEATURES MENU
ACTIVATING THE TIMER
The Timer feature allows you to set the timer to switch to another FM channel at a specified
time while you are listening another FM channel. For the timer to function, the set must not be
switched off. Once the set is switched off, the timer is disabled. Note : Ensure you are in FM
RADIO mode before you access FM RADIO main menu.
MENU
▲
k
MENU
k
MENU
k
FEATURES
▲
É
• TIMER TIME
▼
•
MODE SELECT
•
SCREENSAVER
START TIME
STOP TIME
CHANNEL
ACTIVATE
1. Enter FM RADIO main menu. 2. Select FEATURES.3.Enter FEATURES menu.
Use the Menu and Cursor Up, Down, Right and Left buttons to access the Timer
menu to : – select the items. make the following adjustments or activate the timer.
123
6
5
4
789
TIME : Use the
buttons to key in the
0
current time to enable functioning
of the timer feature.
123
6
5
4
START TIME : Use the
789
buttons to key in the
0
time you want the channel to be
switched on.
123
6
5
4
STOP TIME : Use the
789
buttons to key in the
0
time you want the program to be
switched off.
123
6
5
4
CHANNEL : Use the
789
buttons to key in the
0
FM channel number.
ACTIVATE : Use the Cursor buttons to select
between the Once and Daily mode
to activate the timer.
DISPLAY : Use the Cursor buttons to select
the ON option to display current
time on screen.
FEATURES
TIMER
Ñ
TIME
•
START TIME
•
STOP TIME
FEATURES
•
CHANNEL.
TIMER
•
ACTIVATE
TIME
Ñ
•
START TIME•13:30
•
STOP TIME
•
CHANNEL
FEATURES
•
ACTIVATE
TIMER
•
TIME
•
START TIME
Ñ
STOP TIME
•
CHANNEL
FEATURES
•
ACTIVATE
TIMER
•
TIME
•
START TIMEE
•
STOP TIME
Ñ
CHANNEL
•
ACTIVATE
FEATURES
TIMER
•
TIME
•
START TIMEE
•
STOP TIME
•
CHANNEL
Ñ
ACTIVATE
FEATURES
TIMER
•
START TIMEE
•
STOP TIMEE
•
CHANNEL
•
ACTIVATE
Ñ
DISPLAY
•
É
É
É
•
▲
•
▲
•
▲
•
12:30
15:30
É
▼
▼
É
É
▲
▼
▲
▼
▲
▼
FM8
ONCE
ON
15PF9936/69 p39-51 8/25/03, 5:30 PM41
41
ACCESSING THE FM RADIO FEATURES MENU
USING THE MODE SELECT
This feature allows you to go into TV, HD or PC mode. Note : Ensure you are in FM
RADIO mode before you access FM RADIO main menu.
MENU
k
MENU
k
MENU
k
FEATURES
▲
É
• TIMER TIME
▼
•
MODE SELECT
•
SCREENSAVER
START TIME
STOP TIME
CHANNEL
ACTIVATE
1. Enter FM RADIO main menu. 2. Select FEATURES.3.Enter FEATURES menu.
Press Button
Result on Screen
4. Select MODE SELECT.
FEATURES
• TIMER TV
Ñ
MODE SELECT
•
SCREENSAVER
HD
PC
5. Enter MODE SELECT menu.
FEATURES
or 6. Select your desired mode.
7. Enter selected mode.
Note : You can also access directly the TV, HD and PC modes by the
MODE SELECT
Ñ
TV
• HD
• PC
TV
HD
PC
buttons.
▲
ACTIVATING THE SCREENSAVER
Repeat Steps 1 to 3 as in “Using the Mode Select”.
4. Select SCREENSAVER.
or 5. Select ON option to activate
i
15PF9936/69 p39-51 8/25/03, 5:30 PM42
screensaver mode.
6.Exit menu from screen.
42
FEATURES
•
TIMER
•
MODE SELECT
Ñ
SCREENSAVER ON
FEATURES
•
TIMER
•
MODE SELECT
•
SCREENSAVER•ON
▲
É
▼
ACCESSING THE PC MODE
This TV also allows you use your TV as a PC monitor. To enable you to access PC mode in the
TV, you must connect the following :–
& Connect DC input terminal to the AC adaptor.
é Connect the Mains Plug from the AC adaptor to the AC outlet.
“ Connect Audio L and R output of your PC to the Audio IN L and R of your TV.
‘ Press
( Press
Using theThe 4 buttons
PC
button to enter into PC mode.
MENU
button to enter into the PC Main Controls Menu.
, , and (Cursor Down, Up, Left and Right)
on the remote control allow you to select the desired menu item, make adjustments
and access the sub-menus.
The PC Main Controls menu allows you to access for the followiong menu items :
– AUDIO SELECTION Allows audio selection between the PC , TV/Source and FM
Radio.
– BRIGHTNESS and Allows you to increase or decrease Brightness and Contrast
CONTRAST level.
– ADJUST COLOR Adjusts the color temperature of the picture. 3 settings
are available (Normal, Warm, Cool or Personal).
– VIDEO NOISE Allows you to eliminate the vertical bars by using the Clock
adjustment of Video Noise. Also allows you to eliminate the
horizontal bars by using the Phase Adjustment of VIDEO
NOISE in the Main Controls.
– ADJUST POSITION Allows you to adjust the horizontal and vertical image position.
– AUTO ADJUST Allows you to do automatic adjustments of settings.
æ
– PIP CONTROLS Press
(PIP ON/OFF) button to allow you go into PIP mode.
PIP Controls allows to change the Size and Position of the
subscreen.
– MODE SELECT Allows you enter into TV, HD or FM Radio mode.
– RESET TO FACTORY Allows you to reset all settings to Default Factory settings
SETTINGS
– VIEW FORMATS Allows you to choose between Native and Wide Screen
formats.
43
15PF9936/69 p39-51 8/25/03, 5:30 PM43
PC DISPLAY SETUP
When you are using the TV as a Computer Display, follow the procedures for PC Display setup.
Note : Different Window versions may give different PC Display setup procedures.
1. Press
PC
(PC) button on the remote control to enter PC mode.
Note : The LCD TV will go on standby mode automatically within 5 seconds if no PC
signal is detected.
2. Click on “Settings” on the Window Start menu.
3. Select “Control Panel”.
4. Click on “Display” and a display dialog-box will appear.
5. Navigate to the “Settings” tab on the display dialog-box.
6. Select the required “Colours and Resolution” and click “OK”.
7. Dialog-box “..Does Not Support..’ message will be displayed if set does not support settings.
USING THE PC PICTURE-IN-PICTURE FEATURE
Picture-in-Picture feature allows you to call up a subscreen within your main screen.
How to switch on the Picture-in-Picture Window screen
1. Press
2. Press the æ (PIP On/Off) button to switch on Picture-in-Picture screen (A large size
3. Press the
4. Press the
5. Press the æ (PIP On/Off) buuton a fourth time to exit PIP screen.
Note : PC mode supports Picture-in-Picture with PC refresh rate not more than 60Hz.
PC
(PC) button on the remote control to enter PC mode.
PIP screen appears).
æ
(PIP On/Off) button a second time to change PIP screen to a medium size.
æ
(PIP On/Off) button a third time to change to a small size.
How to position the Picture-in-Picture screen
æ
2. In PC mode, press the
(Picture-in-Picture On/Off) button to switch on Picture-in-
Picture screen.
3. Press the
o
(PIP Position) button repeatedly to position PIP screen to the position of
your choice. (You can choose to position your PIP screen to be on the top left/top right/
bottom right or bottom left hand corner).
4. Press the æ (PIP On/Off) button three times to exit PIP screen.
44
15PF9936/69 p39-51 5/5/03, 2:14 PM44
PC MODES SUPPORT
Note : If the signal from the system does not equal the PC Modes Support, there may be no
video or corrupted video. Proceed to change the system to the right resolution that the PC
mode support.
No. Resolution Refresh Vertical Horizontal Horizontal Pixel
1 640 x 480 60 Hz N 31,500 kHz N 25,175 MHz
2 67 Hz N 35,000 kHz N 30,240 MHz
3 72 Hz N 37,900 kHz N 31,500 MHz
4 75 Hz N 37,500 kHz N 31,500 MHz
5 85 Hz N 43,300 kHz N 36,000 MHz
6 720 x 400 70 Hz P 31,469 kHz N 28,322 MHz
7 800 x 600 56 Hz P 35,100 kHz P 36,000 MHz
8 60 Hz P 37,900 kHz P 40,000 MHz
9 72 Hz P 48,100 kHz P 50,000 MHz
10 75 Hz P 46,900 kHz P 49,500 MHz
11 85 Hz P 53,700 kHz P 56,250 MHz
12 832 x 624 75 Hz P 49,700 kHz P 57,300 MHz
13 1024 x 768 60 Hz N 48,400 kHz N 65,000 MHz
14 70 Hz N 56,500 kHz N 75,000 MHz
Rate Sync Sync Polarity Frequency
15 75 Hz P 60,000 kHz P 78,750 MHz
16 85 Hz P 68,700 kHz P 94,500 MHz
15PF9936/69 p39-51 5/5/03, 2:14 PM45
45
ACCESSING THE HD (HIGH DEFINITION) MODE
The HD mode offers you Picture and Sound adjustments, Mode Select and Lock Channel
feature.
USING THE HD PICTURE / SOUND MENU
The HD Picture and Sound menus allow you to make adjustments to the picture and sound. It
alsoallow you to select and activate other features in the menu.
1. Press the
2. Press the
3. Use the
HD PICTURE/SOUND menu.
4. Use the (CURSOR LEFT/RIGHT) buttons to access the sub-menus.
HD
(HD) button to enter HD mode.
MENU
(MENU) button to enter main menu.
(CURSOR UP/DOWN) buttons to select the items on the
Picture Activities
menu items
Brightness Increase or decrease brightness level.
Color Increase or decrease color level.
Contrast Increase or decrease contrast level until
lightest parts of the picture show good
detail.
Sharpness Increase or decrease sharpness level to
improve detail in the picture.
Hue Imcrease or decrease hue level
Color Temp Allows you a choice of 3 picture settings
(NORMAL, WARM and COOL).
Format Allows you to choose between NORMAL
4:3 and COMPRESSION 16:9 formats.
Sound Activities
menu items
Equalizer Allows you a choice of different sound
frequencies.
BALANCE Increase or decrease to adjust balance
level.
AVL As variation in signal conditions can result
(Auto Volume a sudden change in volume during in
Leveller) commercial breaks or channel switching,
selecting the “ON” function will enable
the volume to remain at a standard
volume level.
PICTURE
BRIGHTNESS 38
COLOR
CONTRAST
SHARPNESS
HUE
COLOR TEMP
PICTURE
COLOR
CONTRAST
SHARPNESS
HUE
COLOR TEMP
FORMAT NORMAL 4:3
Note : HUE feature is only
applicable to NTSC
Ñ É
Ñ
É
programmes. The HUE item
will not appear on the menu if
programme is in PAL mode.
SOUND
EQUALIZER
Ñ
120HZ -12
500HZ
1500HZ
5KHZ
10KHZ
BALANCE
AVL
SOUND
EQUALIZER
120HZ
500HZ
1500HZ
5KHZ
10KHZ
BALANCE
Ñ
AVL ON
É
É
15PF9936/69 p39-51 5/5/03, 2:14 PM46
46
ACCESSING THE HD (HIGH DEFINITION) MODE
USING THE HD MODE SELECT
The HD MODE SELECT feature allows you to switch to TV MODE, FM RADIO MODE,
or PC MODE.
1. In HD mode, press the
HD main menu.
2. Press the
(CURSOR DOWN) button
MENU
(MENU) button to enter
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL
repeatedly until MODE SELECT is highlighted.
3. Use the (CURSOR /RIGHT) button to
MODE SELECT menu
4. Use the
(CURSOR UP/DOWN) buttons
MODE SELECT
TV MODE
FM RADIO MODE
PC MODE HD1
to select TV MODE, FM RADIO MODE or
PC MODE.
5. Press
(CURSOR RIGHT) button to activate selected HD mode.
USING THE HD LOCK CHANNEL
The HD LOCK CHANNEL feature allows you to lock the HD mode channel to censor the
viewing of programme not suitable for children.
MENU
1. In HD mode, press the
main menu.
2. Use the (CURSOR DOWN) button
repeatedly until LOCK CHANNEL is highlighted..
(MENU) button to enter
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL ACCESS CODE
----
123
6
5
4
789
3. Use the
(DIGIT) buttons to enter the four digit
0
Access Code to set uo the LOCK CHANNEL function.
4. Use the (CURSOR /RIGHT) button to select
ON or OFF options. If ON option is selected, the
HD channel will not allow viewing of programmes.
i
5. Press
15PF9936/69 p39-51 5/5/03, 2:14 PM47
(OSD) button to exit menu from screen.
47
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL ON
Ñ É
BEFORE CALLING SERVICE (TV MODE)
Below is a list of frequently occurred symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom What you should do
No power • Check whether adaptor is connected properly into cinch.
• Check the TV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug. Wait for
60 seconds and re-insert plug. Switch on the TV again.
No picture • Check whether transmission is in TV mode. Press
button) on remote control to confirm.
• Check the antenna connection at the rear of the TV.
• Possible TV station problem. Try another channel.
Good picture • Try increasing the volume.
but no sound • Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
• Chek that your headphone is not connected.
Good sound but poor • Try increasing the contrast and brightness setting.
colour or no picture
Snowish picture and • Check antenna connection at the rear of the TV.
noise
Horizontal dotted lines • Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
Double images or • Possible poor positioning of antenna. Using a highly
“Ghost” images directional antenna may improve reception.
TV not responding to • Check life span of batteries of remote control handset.
remote control handset • Aim remote control handset directly at remote control
sensor lens on the TV.
TV
(TV
An after-image appears • If an image remains in the screen for an extended period of
time, it may be imprinted in the screen and leave an afterimage. This usually disappears after a few hours.
An after-image remains • This is characteristic of liquid crystal and is not caused by a
after the power has been malfunction or deterioration of the liquid crystal. This afterturned off image will disappear after a set amount of time.
48
15PF9936/69 p39-51 5/5/03, 2:14 PM48
BEFORE CALLING SERVICE (PC / FM RADIO MODE)
Below is a list of frequently occurred symptoms when you are in PC /FM RADIO mode .
Before you call for service, make these simple checks. Some of these symptoms can easily be
rectified if you know what to do.
Symptom What you should do
Incorrect Display position • Adjust the image position using the Horizontal Position and/
or Vertical Position in the PC Mains Controls menu.
No Video Input • Make sure the monitor cable is properly connected to the
PC input (VGA) at the rear of the TV.
• Check whether the monitor cable has bent pins.
Vertical flicker appears • Try eliminating the vertical bars by using the Clock
Adjustment of VIDEO NOISE in the Main Controls.
Horizontal flicker appears • Try eliminating the horizontal bars by using the Phase
Adjustment of VIDEO NOISE in the Main Controls.
Screen too bright or dark • Try adjusting the contrast and brightness in the Main
Controls.
Cannot access FM radio • Check whether the connection from FM Antenna socket to
the FM Radio mains is done correctly.
15PF9936/69 p39-51 5/5/03, 2:14 PM49
49
SPECIFICATIONS
15PF9936
Picture tube screen size 380 mm
Audio Output 2 X 3 W
TV System NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Playback System NTSC 3.58, NTSC 4.43, PAL 60
Set Dimensions without stand
Length 493 mm
Height 307 mm
Depth 65 mm
Set Dimensions with stand
Length 493 mm
Height 343 mm
Depth 176 mm
Net Weight of Set with stand 6.2 kg
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the
type number on mains adaptor.
50
15PF9936/69 p39-51 9/5/03, 3:05 PM50
15PF9936/69 p39-51 8/25/03, 6:20 PM51
3139 125 30992
51
Loading...